130 lines
3.5 KiB
C
130 lines
3.5 KiB
C
/*
|
|
* Copyright (c) 2016 Rockchip Electronics Co., Ltd
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <asm/armv8/mmu.h>
|
|
#include <asm/arch/bootrom.h>
|
|
#include <asm/arch/grf_rk3399.h>
|
|
#include <asm/arch/hardware.h>
|
|
#include <asm/io.h>
|
|
#include <syscon.h>
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
#define GRF_EMMCCORE_CON11 0xff77f02c
|
|
#define PMU_GRF_SOC_CON0 0xff320180
|
|
|
|
static struct mm_region rk3399_mem_map[] = {
|
|
{
|
|
.virt = 0x0UL,
|
|
.phys = 0x0UL,
|
|
.size = 0xf8000000UL,
|
|
.attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) |
|
|
PTE_BLOCK_INNER_SHARE
|
|
}, {
|
|
.virt = 0xf8000000UL,
|
|
.phys = 0xf8000000UL,
|
|
.size = 0x08000000UL,
|
|
.attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
|
|
PTE_BLOCK_NON_SHARE |
|
|
PTE_BLOCK_PXN | PTE_BLOCK_UXN
|
|
}, {
|
|
/* List terminator */
|
|
0,
|
|
}
|
|
};
|
|
|
|
struct mm_region *mem_map = rk3399_mem_map;
|
|
|
|
const char * const boot_devices[BROM_LAST_BOOTSOURCE + 1] = {
|
|
[BROM_BOOTSOURCE_EMMC] = "/sdhci@fe330000",
|
|
[BROM_BOOTSOURCE_SPINOR] = "/spi@ff1d0000",
|
|
[BROM_BOOTSOURCE_SD] = "/dwmmc@fe320000",
|
|
};
|
|
|
|
#ifdef CONFIG_SPL_BUILD
|
|
|
|
#define TIMER_CHN10_BASE 0xff8680a0
|
|
#define TIMER_END_COUNT_L 0x00
|
|
#define TIMER_END_COUNT_H 0x04
|
|
#define TIMER_INIT_COUNT_L 0x10
|
|
#define TIMER_INIT_COUNT_H 0x14
|
|
#define TIMER_CONTROL_REG 0x1c
|
|
|
|
#define TIMER_EN 0x1
|
|
#define TIMER_FMODE (0 << 1)
|
|
#define TIMER_RMODE (1 << 1)
|
|
|
|
void rockchip_stimer_init(void)
|
|
{
|
|
writel(0xffffffff, TIMER_CHN10_BASE + TIMER_END_COUNT_L);
|
|
writel(0xffffffff, TIMER_CHN10_BASE + TIMER_END_COUNT_H);
|
|
writel(0, TIMER_CHN10_BASE + TIMER_INIT_COUNT_L);
|
|
writel(0, TIMER_CHN10_BASE + TIMER_INIT_COUNT_H);
|
|
writel(TIMER_EN | TIMER_FMODE, TIMER_CHN10_BASE + TIMER_CONTROL_REG);
|
|
printf("%s\n", __func__);
|
|
}
|
|
|
|
#define GRF_BASE 0xff770000
|
|
#define PMUGRF_BASE 0xff320000
|
|
#define PMUSGRF_BASE 0xff330000
|
|
int arch_cpu_init(void)
|
|
{
|
|
struct rk3399_pmusgrf_regs *sgrf = (void *)PMUSGRF_BASE;
|
|
struct rk3399_pmugrf_regs *pmugrf = (void *)PMUGRF_BASE;
|
|
struct rk3399_grf_regs * const grf = (void *)GRF_BASE;
|
|
|
|
/* We do some SoC one time setting here. */
|
|
/*
|
|
* Disable DDR and SRAM security regions.
|
|
*
|
|
* As we are entered from the BootROM, the region from
|
|
* 0x0 through 0xfffff (i.e. the first MB of memory) will
|
|
* be protected. This will cause issues with the DW_MMC
|
|
* driver, which tries to DMA from/to the stack (likely)
|
|
* located in this range.
|
|
*/
|
|
rk_clrsetreg(&sgrf->ddr_rgn_con[16], 0x1ff, 0);
|
|
rk_clrreg(&sgrf->slv_secure_con4, 0x2000);
|
|
|
|
/* eMMC clock generator: disable the clock multipilier */
|
|
rk_clrreg(&grf->emmccore_con[11], 0x0ff);
|
|
|
|
/* PWM3 select pwm3a io */
|
|
rk_clrreg(&pmugrf->soc_con0, 1 << 5);
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
void board_debug_uart_init(void)
|
|
{
|
|
#define GRF_BASE 0xff770000
|
|
struct rk3399_grf_regs * const grf = (void *)GRF_BASE;
|
|
|
|
#if defined(CONFIG_DEBUG_UART_BASE) && (CONFIG_DEBUG_UART_BASE == 0xff180000)
|
|
/* Enable early UART0 on the RK3399 */
|
|
rk_clrsetreg(&grf->gpio2c_iomux,
|
|
GRF_GPIO2C0_SEL_MASK,
|
|
GRF_UART0BT_SIN << GRF_GPIO2C0_SEL_SHIFT);
|
|
rk_clrsetreg(&grf->gpio2c_iomux,
|
|
GRF_GPIO2C1_SEL_MASK,
|
|
GRF_UART0BT_SOUT << GRF_GPIO2C1_SEL_SHIFT);
|
|
#else
|
|
/* Enable early UART2 channel C on the RK3399 */
|
|
rk_clrsetreg(&grf->gpio4c_iomux,
|
|
GRF_GPIO4C3_SEL_MASK,
|
|
GRF_UART2DGBC_SIN << GRF_GPIO4C3_SEL_SHIFT);
|
|
rk_clrsetreg(&grf->gpio4c_iomux,
|
|
GRF_GPIO4C4_SEL_MASK,
|
|
GRF_UART2DBGC_SOUT << GRF_GPIO4C4_SEL_SHIFT);
|
|
/* Set channel C as UART2 input */
|
|
rk_clrsetreg(&grf->soc_con7,
|
|
GRF_UART_DBG_SEL_MASK,
|
|
GRF_UART_DBG_SEL_C << GRF_UART_DBG_SEL_SHIFT);
|
|
#endif
|
|
}
|