db704406b3
The DK1 and DK2 boards use the USB Type-C controller STUSB1600. This patch updates: - the device tree to add the I2C node in the DT - the board stm32mp1 to probe this I2C device and use this controller to check cable detection. - the DWC2 driver to support a new dt property "u-boot,force-b-session-valid" which forces B session and device mode; it is a workaround because the VBUS sensing and ID detection isn't available with stusb1600. Conflicts: arch/arm/dts/stm32mp157-pinctrl.dtsi arch/arm/dts/stm32mp157a-dk1-u-boot.dtsi arch/arm/dts/stm32mp157a-dk1.dts board/st/stm32mp1/stm32mp1.c Change-Id: I73b62dce9c3e0661e6d2463b87389229cd3559a7 Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> (cherry picked from commit 6fe7dd3327d552bacf4266d7f1ed074bf98ffb92) |
||
|---|---|---|
| .. | ||
| adc | ||
| ata | ||
| clock | ||
| cpu | ||
| exynos | ||
| firmware | ||
| gpio | ||
| gpu | ||
| i2c | ||
| input | ||
| leds | ||
| mailbox | ||
| misc | ||
| mmc | ||
| mtd | ||
| nand | ||
| net | ||
| pci | ||
| pinctrl | ||
| pmic | ||
| power | ||
| pwm | ||
| ram | ||
| regulator | ||
| remoteproc | ||
| reset | ||
| serial | ||
| spi | ||
| spmi | ||
| thermal | ||
| timer | ||
| usb | ||
| video | ||
| README | ||
| chosen.txt | ||
| config.txt | ||
| root.txt | ||
README
Device Tree Bindings Staging Area ================================= This directory contains device tree bindings for U-Boot. These follow along with Linux kernel bindings, with a few additions. By adding the files here, U-Boot patches can clearly show thees additions. This makes it easier for device tree people to review these additions in patches sent to the U-Boot mailing list. The intent IS to commit these files to U-Boot. Hopefully at some point the files will be stored in another repo (shared with Linux) which is brought in as needed. Changes here are intended to mirror changes in the Linux Documentation/devicetree/bindings/ directory. sjg@chromium.org 17-Jan-12