d02d11f8ae
The RK3399 does not have any boot selection pins and the BootROM probes
the boot interfaces using the following boot-order:
1. SPI
2. eMMC (sdhci in DTS)
3. SD card (sdmmc in DTS)
4. USB loader
For ease of deployment, the SPL stage should mirror the boot order of
the ROM and use the same probing order (assuming that valid images can
be detected by SPL) unless instructed otherwise. The boot-order can
then be configured via the 'u-boot,spl-boot-order' property in the
chosen-node of the DTS.
While this approach is easily extensible to other boards, it is only
implemented for the RK3399 for now, as the large SRAM on the RK3399
makes this easy to fit the needed infrastructure into SPL and our
production setup already runs with DM, OF_CONTROL and BLK in SPL.
The new boot-order property is expected to be used in conjunction with
FIT images (and all legacy image formats disabled via Kconfig).
A boot-sequence with probing and fallthroughs from SPI via eMMC to SD
card (i.e. &spiflash, &sdhci, &sdmmc) has been validated on the RK3399-Q7.
Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Tested-by: Klaus Goger <klaus.goger@theobroma-systems.com>
Tested-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Acked-by: Simon Glass <sjg@chromium.org>
|
||
|---|---|---|
| .. | ||
| adc | ||
| ata | ||
| clock | ||
| cpu | ||
| exynos | ||
| firmware | ||
| gpio | ||
| gpu | ||
| i2c | ||
| input | ||
| leds | ||
| mailbox | ||
| misc | ||
| mmc | ||
| mtd | ||
| nand | ||
| net | ||
| pci | ||
| pinctrl | ||
| pmic | ||
| power | ||
| pwm | ||
| regulator | ||
| remoteproc | ||
| reset | ||
| serial | ||
| spi | ||
| spmi | ||
| thermal | ||
| timer | ||
| usb | ||
| video | ||
| README | ||
| chosen.txt | ||
| config.txt | ||
| root.txt | ||
README
Device Tree Bindings Staging Area ================================= This directory contains device tree bindings for U-Boot. These follow along with Linux kernel bindings, with a few additions. By adding the files here, U-Boot patches can clearly show thees additions. This makes it easier for device tree people to review these additions in patches sent to the U-Boot mailing list. The intent IS to commit these files to U-Boot. Hopefully at some point the files will be stored in another repo (shared with Linux) which is brought in as needed. Changes here are intended to mirror changes in the Linux Documentation/devicetree/bindings/ directory. sjg@chromium.org 17-Jan-12