The DWC3 with Innosilicon USB 3.0 PHY on Rockchip platforms
(e.g. rk3328, rk1808) has problem to exit to U0 state from
U1 or U2 state when DWC3 work as peripheral mode. This patch
adds a quirk to reject transition to U1 and U2 state to
workaround this issue.
Refer to commit aaa5c055cc06 ("usb: dwc3: add dis-u1u2-quirk to
reject enter U1 and U2") in Rockchip Linux Kernel-4.4 .
Change-Id: I1f4176caab3ccdc31ba7eb06684267833bf804db
Signed-off-by: Frank Wang <frank.wang@rock-chips.com>
The error is:
In file included from include/part.h:10:0,
from include/usb.h:18,
from include/linux/usb/gadget.h:22,
from drivers/usb/dwc3/ep0.c:20:
include/ide.h:62:14: error: unknown type name ‘uchar’
void ide_led(uchar led, uchar status);
Fixing it by including common.h that defines the uchar type.
Change-Id: I97a5eabe32e03709a7e2800cd6ee8adf186daa76
Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Signed-off-by: Frank Wang <frank.wang@rock-chips.com>
(cherry picked from commit 4d3825c1915e1649c4be0320e74be158e4698655)
When enable debug option to compile, it will give the
following error, this patch is used to get rid of it.
error: ‘flags’ is used uninitialized in this function [-Werror=uninitialized]
Change-Id: Iba4cd59ab28eb7a48490e45842541f0418239e17
Signed-off-by: William Wu <william.wu@rock-chips.com>
The dwc3_flush_cache() call was declared and used inconsistently:
* The declaration assumed 'int' for addresses (a potential issue
when running in a LP64 memory model).
* The invocation cast the address to 'long'.
This change ensures that both the declaration and usage of this
function consistently uses 'uintptr_t' for correct behaviour even
when the allocated buffers (to be flushed) reside outside of the
lower 32bits of memory.
Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
dwc3 can do only max packet aligned transfers. So in case request length
is not max packet aligned and is bigger than DWC3_EP0_BOUNCE_SIZE
two chained TRBs is required to handle the transfer.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Reviewed-by: Lukasz Majewski <l.majewski@samsung.com>
No functional change. Modified few things so that there are no
code duplication while implementing chained TRB.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Reviewed-by: Lukasz Majewski <l.majewski@samsung.com>
In the linux kernel, non cacheable buffers are used. However in uboot
since there are no APIs to allocate non cacheable memory, all
the buffers should be flushed before using it.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
*) Changed the included header files to that used in u-boot.
*) added dwc3_ep_event_string() used in ep0.c
*) Fixed other misc warnings
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Reviewed-by: Lukasz Majewski <l.majewski@samsung.com>
Removed most of the trace_* APIs from dwc3 driver since tracepoints are not
supported in u-boot. Replaced some of the trace_* API with dev_dbg/dev/vdbg.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Review-by: Lukasz Majewski <l.majewski@samsung.com>
Modified the file header to the format that is used in u-boot. Also
included in the header, the commit in linux kernel from which each of
these files are added.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Reviewed-by: Lukasz Majewski <l.majewski@samsung.com>
Added dwc3 folder from linux kernel 3.19-rc1 (97bf6af1f9)
to u-boot. This will be adapted to work with u-boot in the
following patches.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Reviewed-by: Lukasz Majewski <l.majewski@samsung.com>
Frank Wang
Jean-Jacques Hiblot
William Wu
Philipp Tomsich
Michal Simek
Kishon Vijay Abraham I