In this mode, uart debug is initialized depends on
configuration from pre-loader or CONFIG_UART_DEBUG_.
The serial is not care about dts "stdout-path" and
not register into console framework any more. It's
nice to use pre-loader serial and make serial easy
to configure.
Signed-off-by: Joseph Chen <chenjh@rock-chips.com>
Change-Id: If4c68229d76b6f1710a35e3ef9a2a91cb306fa9c
Rename CONSOLE_SERIAL_SKIP_INIT to DEBUG_UART_ALWAYS_MODE for
easy understand.
Select this to always use debug UART, skip complicated
console UART register.
Signed-off-by: Joseph Chen <chenjh@rock-chips.com>
Change-Id: I3c265840bde015fe5fd7c73d959ba0538297b7c2
1. We bind all serial nodes including UART debug node from kernel dtb.
2. On some rockchip platforms, UART debug and SDMMC pin are multiplex.
Without this, iomux is switched from SDMMC => UART debug at this time.
3. We may switch to UART debug iomux after SDMMC boot failed to print log.
fixes: (503458d core: device: allow serial node bind from kernel dtb)
Signed-off-by: Joseph Chen <chenjh@rock-chips.com>
Change-Id: I286ad49f6c5a7e083d205560a4a16e16ded6b83f
"serial_" API is designed for UART debug and "serial_stub_" API
is designed for stdio device(e.g. keyboard, video, lcd...).
We need new API for normal serial device, e.g. a UART working
with other peripheral device.
Signed-off-by: Joseph Chen <chenjh@rock-chips.com>
Change-Id: Ifc2cb2ca9c1d4a395e89ceb5e059ec05a07b1967
If the console is not marked to be bound, bind it anyway.
This makes serial node in U-Boot dtb no need to be enabled
and bound into dm tree since they are not sured to be the
stdout for pre-loader serial.
This avoids the mix of kernel and U-Boot serial node under
serial uclass list, otherwise serial device bound from U-Boot
dtb always have the higher priority.
Signed-off-by: Joseph Chen <chenjh@rock-chips.com>
Change-Id: I4d35626288124d14d47df2e7492d12f1af6a36ae
- set default clock rate 24000000;
- pre-loader param only applied on target serial debug;
- no special workarund when kernel dtb is enabled since
we have solved phandle miss match issue.
Signed-off-by: Joseph Chen <chenjh@rock-chips.com>
Change-Id: Ic10e1f4120e7e2458773e3fcc5925ba69d062d61
Make gd->serial only works for UART debug but not other UART driver.
This requires other UART must initialized late than UART debug,
recommend in board_late_init().
Signed-off-by: Joseph Chen <chenjh@rock-chips.com>
Change-Id: I9633b5f8a2dfac9c2f9a733207088e5919669209
include/commproc.h is dedicated to the 8xx, rename it cpm_8xx.h and
move it into arch/powerpc/include/asm
Change-Id: I37b02101bd88b607f0f9eca79fdbb7cc1e85ed4d
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Jon Lin <jon.lin@rock-chips.com>
(cherry picked from commit 18f8d4c60d26e6cd113461c5d716c64897c3f112)
CONFIG_8xx doesn't mean much outside of arch/powerpc/
This patch renames it CONFIG_MPC8xx just like CONFIG_MPC85xx etc ...
It also renames 8xx_immap.h to immap_8xx.h to be consistent with
other file names.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
(cherry picked from commit ee1e600c13d16febd517ab7d0d2c243db174789b)
Change-Id: I564708bb6517b699749e8a54c013d032f785e459
Signed-off-by: Jon Lin <jon.lin@rock-chips.com>
wait_for_bit callers use the 32 bit LE version
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Reviewed-by: Jagan Teki <jagan@openedev.com>
Change-Id: I638846de7db29711fb7c778cc8304b507de057fe
Signed-off-by: Jon Lin <jon.lin@rock-chips.com>
(cherry picked from commit 48263504c8d501678acaa90c075f3f7cda17c316)
Signed-off-by: Jon Lin <jon.lin@rock-chips.com>
- pass pre-loader serial configure by rk atags;
- it depends on serial aliases to find uart port;
- enabled by CONFIG_ROCKCHIP_USING_PRELOADER_SERIAL;
Change-Id: I6723cccc5e1f3dac77203b4cc19cdac631f5133b
Signed-off-by: Joseph Chen <chenjh@rock-chips.com>
with this patch, U-Boot can save a lot of boot time which
depends on how much log we print.
Change-Id: Ib96e9343e9439d251c2c40be14609bc08d638931
Signed-off-by: Joseph Chen <chenjh@rock-chips.com>
With kernel dtb support, serial ofnode not able to get cru phandle,
do not return err because rockchip uart always get 24MHz clock.
Change-Id: Ibd76eb553570cdf73a151c038432c0801cd3230f
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Fix typos in USB tty driver.
Change-Id: Ida39f7d6e86f386173bf4a905ee66d1cfa98aade
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
(cherry picked from commit c409336dacff3f48da70727da2dc8a1c47f5bf5e)
Pasting longer lines into the U-Boot console prompt sometimes leads to
characters missing. One problem here is the small 16-byte FIFO of the
legacy NS16550 UART, e.g. on x86 platforms.
This patch now introduces a Kconfig option to enable RX buffer support
for all DM based serial drivers. With this option enabled, I was
able paste really long lines into the U-Boot console, without any
characters missing.
Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Simon Glass <sjg@chromium.org>
Cc: Bin Meng <bmeng.cn@gmail.com>
Cc: Tom Rini <trini@konsulko.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
This reverts commit 6822cf3ec7.
As Bin Meng has tested and pointed out, we don't need the RX interrupt
for the RX buffer support at all. Just reading all available characters
into a buffer is sufficient to solve the problem with the dropped
characters upon long lines pasted into the U-Boot prompt. Since this
RX buffer support can be implemented in a generic way, without any
device specifica (e.g. for the ns16550), I'll post a new patch with
a new serial RX buffer support for DM, which all DM based serial
drivers can use.
Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Simon Glass <sjg@chromium.org>
Cc: Bin Meng <bmeng.cn@gmail.com>
Cc: Tom Rini <trini@konsulko.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
We are now using an env_ prefix for environment functions. Rename these
two functions for consistency. Also add function comments in common.h.
Quite a few places use getenv() in a condition context, provoking a
warning from checkpatch. These are fixed up in this patch also.
Suggested-by: Wolfgang Denk <wd@denx.de>
Signed-off-by: Simon Glass <sjg@chromium.org>
Since we now have clock driver on the RCar Gen3 , obtain the clock
configuration using the clock framework functions. In case this
fails, fall back to the original code for pulling the clock config
directly out of OF.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Convert the SH Serial to Kconfig using tools/moveconfig.py tool
and a bit of manual adjustment to cater for failed conversions.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
With driver model the serial device is often not called "serial". Mark
driver-model stdio devices so that they can be detected and we can look up
the uclass. This is a more reliable way of finding out whether the console
is connected to a serial device or not.
Signed-off-by: Simon Glass <sjg@chromium.org>
Some platforms have very limited SRAM to run SPL code, so there may
not be the same amount space for a malloc pool before relocation in
the SPL stage as the normal U-Boot stage.
Make SPL and (the full) U-Boot stage use independent SYS_MALLOC_F_LEN,
so the size of pre-relocation malloc pool can be configured memory
space independently.
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
[fixed up commit-message:]
Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Replace proprietary clock_get() by clk_get_rate()
The stm32x7 serial driver is now "generic" and can be used
by other STM32 SoCs.
Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Acked-by: Vikas MANOCHA <vikas.manocha@st.com>
This allow to remove include/dm/platform_data/serial_stm32x7.h
which was included in the past by stm32x7 driver and by
stm32f746-disco.c board file.
Since patch 42bf5e7c27 "serial: stm32f7: add device tree support"
this file is no more needed in board file.
Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Acked-by: Vikas MANOCHA <vikas.manocha@st.com>
Pasting longer lines into the U-Boot console prompt sometimes leads to
characters missing. One problem here is the small 16-byte FIFO of the
legacy NS16550 UART, e.g. on x86 platforms.
This patch now introduces a Kconfig option to enable RX interrupt
buffer support for NS16550 style UARTs. With this option enabled, I was
able paste really long lines into the U-Boot console, without any
characters missing.
Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Cc: Bin Meng <bmeng.cn@gmail.com>
[trini: Guard ns16550_serial_remove with
CONFIG_IS_ENABLED(SERIAL_PRESENT) to match struct assignment]
Signed-off-by: Tom Rini <trini@konsulko.com>
commit 2eb48ff7a2 ("powerpc, 8260: remove support for mpc8260")
removed support for 8260 CPU.
This patch remove some remainders.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Add support for the debug UART to assist with early debugging.
Enable it for i.CoreM6 as an example.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
- Remove space between #define to macro
- Add tab between macro and value
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Move the common baud generation code into _mxc_serial_setbrg
so-that dm and non-dm can call this func.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Move the common initialization code into _mxc_serial_init
so-that dm and non-dm can call this func.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Control reg write should be part of setbrg for better
buadrate generation, so move cr1 and cr2 write to
mxc_serial_setbrg
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Use RFDIV in dm-code instead of numeric value, so-that
it can be common for dm and non-dm.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
This patch will add common reg space for non-dm and
dm code and non-dm reg space can be accessed using
mxc_base.
This will
- get rid of __REG volatile assignments
- Make common reg_space by removing unneeded macros
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Add support for a live device tree to the core serial uclass.
Signed-off-by: Simon Glass <sjg@chromium.org>
Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Tested-on: Beaver, Jetson-TK1
This function is quite long. Move the core code into a separate function
in preparation for adding livetree support.
Signed-off-by: Simon Glass <sjg@chromium.org>
Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Tested-on: Beaver, Jetson-TK1
Update this driver to support a live device tree.
Signed-off-by: Simon Glass <sjg@chromium.org>
Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Tested-on: Beaver, Jetson-TK1
With the new dev_read functions available, we can convert the rockchip
architecture-specific drivers and common drivers used by these devices
over to the dev_read family of calls.
This covers the serial driver (ns16550 and compatible) used for the
Rockchip devices.
Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Add missing static to serial_stub_puts().
Unexport serial_stub_{getc,tstc} because they are used locally.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
fix menutext for the options SPL_DM_SERIAL and TPL_DM_SERIAL.
Both have the same text as DM_SERIAL, which is
confusing.
Signed-off-by: Heiko Schocher <hs@denx.de>
Reviewed-by: Stefan Roese <sr@denx.de>
Joseph Chen
Christophe Leroy
Jon Lin
Kever Yang
Heinrich Schuchardt
Stefan Roese
Simon Glass
Marek Vasut
Patrice Chotard
Andy Yan
Jagan Teki
Tom Rini
Philipp Tomsich
Masahiro Yamada
Heiko Schocher