According to the AOSP default definition, the virtual A/B
metadata is located at the offset 32KB of the misc partition.
Signed-off-by: Dayao Ji <jdy@rock-chips.com>
Change-Id: Ib60379f25e4c72be9f5ed03934ab7dc928cdd585
It makes thunder-boot SPL only map periph device region as
dcache off but not all 4GB region to save boot time.
Signed-off-by: Joseph Chen <chenjh@rock-chips.com>
Change-Id: Ib0abafe1b74cde24755780261fb7fcfaa8932ea2
Android Header v3 and vendor boot partition are introduced
from Android-11(R).
Header populate:
Header v3 is no longer compatible with v0/1/2 header, we
add populate_andr_img_hdr() to merge boot and vendor_boot
partition header into struct andr_img_hdr in order to
compatible with v0/1/2 header.
resource.img:
The second_addr and second_size fields are removed in v3,
so we require resource partition to restore resource.img.
A/B system:
If not A/B system, the boot.img header version is 3 and
recovery header is version 2.
AVB load image:
- If allow verification error: the image is loaded by
ops->get_preloaded_partition() which auto populates
boot_img_hdr_v3.
- If not allow verification error: the image is full loaded
by ops->read_from_partition() which doesn't populate
boot_img_hdr_v3, we need to fix it.
Signed-off-by: Joseph Chen <chenjh@rock-chips.com>
Change-Id: I2afce53c43d782fc57baa01acf9c05518b580840
The name style follows other rockchip scripts is better, like:
./scripts/atf.sh
./scripts/loader.sh
./scripts/spl.sh
./scripts/tos.sh
./scripts/uboot.sh
Signed-off-by: Joseph Chen <chenjh@rock-chips.com>
Change-Id: I249f67d0b4e385a3f05f9c754bc0a9c371b46910
error message: include/image.h:1015:1: error: unknown type
name 'bool'; did you mean '_Bool'?
Signed-off-by: Jason Zhu <jason.zhu@rock-chips.com>
Change-Id: I786c04be6f389ad42685b934eb13426ea9a9e5a4
Use CONFIG_SPL_KERNEL_BOOT for thunder boot to stay the same with SPL.
Change-Id: I0d2f0a91a5f628233de1cb848519fd76b692a2af
Signed-off-by: Tang Yun ping <typ@rock-chips.com>
GPIO0_D6 pull down in default, but it's needed for SPI Flash with
WP# pin pull up.
Change-Id: I80a79e0072f1fff49673bbe834f51603e10283dc
Signed-off-by: Jon Lin <jon.lin@rock-chips.com>
Moving current configurations into SPL boot stage except
something belongs to USBPLUG.
Signed-off-by: Joseph Chen <chenjh@rock-chips.com>
Change-Id: I64ec47f7c0c3cef57854a72af86e9ef1bebbcaed
1.It's good for Nand devices P/E align
2.But actually 0x200 sector(USB limit) is aligned with Nand flash block size
Change-Id: I69510161c32e15ee739c99d36f0294d59df554dd
Signed-off-by: Jon Lin <jon.lin@rock-chips.com>
add some special pll configs for better clock jitter.
Change-Id: I3484d36feb9f4b99a42a2ba532ae2015968d83ff
Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
Return partition name without any slot suffix in this case.
Signed-off-by: Joseph Chen <chenjh@rock-chips.com>
Change-Id: If0692e3e2845f152802632994f5da5a9d3fb1731
flush_dcache_all() operating on set/way is faster than
flush_cache() and invalidate_dcache_range() operating
on virtual address.
Tested: it saves about 12.5ms in rv1126 thunder-boot.
Signed-off-by: Joseph Chen <chenjh@rock-chips.com>
Change-Id: Ie8ba42f56e72d0d554dca3949573196ef2165bd7
We made a deal: Not allow U-Boot to bring up thunder-boot kernel.
Because the thunder-boot feature may require special memory layout
or other appointments, U-Boot can't handle all that. Let's go back
to SPL to bring up kernel.
Note: bootcmd is only called in normal boot sequence, that means
we allow user to boot what they want in U-Boot shell mode.
Signed-off-by: Joseph Chen <chenjh@rock-chips.com>
Change-Id: I8a68af3fbd441ab7e30ad310640eaf3ee5f24525
Keep rv1126 support in pinctrl-rockchip.c with legency
Change-Id: I50791c3c30e6efa58d324eaef7bfc4d4aa9e440c
Signed-off-by: Jianqun Xu <jay.xu@rock-chips.com>
Dayao Ji
Joseph Chen
Liang Chen
Jon Lin
Jason Zhu
Nickey Yang
Tang Yun ping
Weiwen Chen
Elaine Zhang
Ziyuan Xu
Jianqun Xu