mtd: spinand: Support FM25S01A

Change-Id: I805cbf0e8bc47cd9bd94fd296dbaf46921490f15
Signed-off-by: Jon Lin <jon.lin@rock-chips.com>

drivers/mtd/nand/spi/Makefile

@@ -1,4 +1,4 @@
 # SPDX-License-Identifier: GPL-2.0
 
-spinand-objs := core.o gigadevice.o macronix.o micron.o toshiba.o winbond.o dosilicon.o esmt.o xtx.o hyf.o
+spinand-objs := core.o gigadevice.o macronix.o micron.o toshiba.o winbond.o dosilicon.o esmt.o xtx.o hyf.o fmsh.o
 obj-$(CONFIG_MTD_SPI_NAND) += spinand.o

drivers/mtd/nand/spi/core.c

@@ -824,6 +824,7 @@ static const struct spinand_manufacturer *spinand_manufacturers[] = {
 	&esmt_spinand_manufacturer,
 	&xtx_spinand_manufacturer,
 	&hyf_spinand_manufacturer,
+	&fmsh_spinand_manufacturer,
 };
 
 static int spinand_manufacturer_detect(struct spinand_device *spinand)

drivers/mtd/nand/spi/fmsh.c

@@ -0,0 +1,101 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2020 exceet electronics GmbH
+ *
+ * Authors:
+ *	Frieder Schrempf <frieder.schrempf@exceet.de>
+ *	Boris Brezillon <boris.brezillon@bootlin.com>
+ */
+
+#ifndef __UBOOT__
+#include <linux/device.h>
+#include <linux/kernel.h>
+#endif
+#include <linux/mtd/spinand.h>
+
+#define SPINAND_MFR_FMSH		0xA1
+
+static SPINAND_OP_VARIANTS(read_cache_variants,
+		SPINAND_PAGE_READ_FROM_CACHE_QUADIO_OP(0, 2, NULL, 0),
+		SPINAND_PAGE_READ_FROM_CACHE_X4_OP(0, 1, NULL, 0),
+		SPINAND_PAGE_READ_FROM_CACHE_DUALIO_OP(0, 1, NULL, 0),
+		SPINAND_PAGE_READ_FROM_CACHE_X2_OP(0, 1, NULL, 0),
+		SPINAND_PAGE_READ_FROM_CACHE_OP(true, 0, 1, NULL, 0),
+		SPINAND_PAGE_READ_FROM_CACHE_OP(false, 0, 1, NULL, 0));
+
+static SPINAND_OP_VARIANTS(write_cache_variants,
+		SPINAND_PROG_LOAD_X4(true, 0, NULL, 0),
+		SPINAND_PROG_LOAD(true, 0, NULL, 0));
+
+static SPINAND_OP_VARIANTS(update_cache_variants,
+		SPINAND_PROG_LOAD_X4(false, 0, NULL, 0),
+		SPINAND_PROG_LOAD(false, 0, NULL, 0));
+
+static int fm25s01a_ooblayout_ecc(struct mtd_info *mtd, int section,
+				  struct mtd_oob_region *region)
+{
+	return -ERANGE;
+}
+
+static int fm25s01a_ooblayout_free(struct mtd_info *mtd, int section,
+				   struct mtd_oob_region *region)
+{
+	if (section)
+		return -ERANGE;
+
+	region->offset = 2;
+	region->length = 62;
+
+	return 0;
+}
+
+static const struct mtd_ooblayout_ops fm25s01a_ooblayout = {
+	.ecc = fm25s01a_ooblayout_ecc,
+	.rfree = fm25s01a_ooblayout_free,
+};
+
+static const struct spinand_info fmsh_spinand_table[] = {
+	SPINAND_INFO("FM25S01A", 0xE4,
+		     NAND_MEMORG(1, 2048, 64, 64, 1024, 1, 1, 1),
+		     NAND_ECCREQ(1, 512),
+		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
+					      &write_cache_variants,
+					      &update_cache_variants),
+		     0,
+		     SPINAND_ECCINFO(&fm25s01a_ooblayout, NULL)),
+};
+
+/**
+ * fmsh_spinand_detect - initialize device related part in spinand_device
+ * struct if it is a FMSH device.
+ * @spinand: SPI NAND device structure
+ */
+static int fmsh_spinand_detect(struct spinand_device *spinand)
+{
+	u8 *id = spinand->id.data;
+	int ret;
+
+	/*
+	 * FMSH SPI NAND read ID need a dummy byte,
+	 * so the first byte in raw_id is dummy.
+	 */
+	if (id[1] != SPINAND_MFR_FMSH)
+		return 0;
+
+	ret = spinand_match_and_init(spinand, fmsh_spinand_table,
+				     ARRAY_SIZE(fmsh_spinand_table), id[2]);
+	if (ret)
+		return ret;
+
+	return 1;
+}
+
+static const struct spinand_manufacturer_ops fmsh_spinand_manuf_ops = {
+	.detect = fmsh_spinand_detect,
+};
+
+const struct spinand_manufacturer fmsh_spinand_manufacturer = {
+	.id = SPINAND_MFR_FMSH,
+	.name = "FMSH",
+	.ops = &fmsh_spinand_manuf_ops,
+};

include/linux/mtd/spinand.h

@@ -210,6 +210,7 @@ extern const struct spinand_manufacturer dosilicon_spinand_manufacturer;
 extern const struct spinand_manufacturer esmt_spinand_manufacturer;
 extern const struct spinand_manufacturer xtx_spinand_manufacturer;
 extern const struct spinand_manufacturer hyf_spinand_manufacturer;
+extern const struct spinand_manufacturer fmsh_spinand_manufacturer;
 
 /**
  * struct spinand_op_variants - SPI NAND operation variants