Makes it easier to transition it over to be controlled
by the GC.
Change-Id: I6bea738b3852abfc7870b71e639efc595eeb28fc
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Given the following expression
var x = MySingleton.MyEnumValue
where MySingleton is a QML (composite) singleton and MyEnumValue comes
from a QML declared enum, we had code in place up to (and including)
5.10 to attempt to optimize that expression to a enum constant at
compile time. In 5.10 that optimization does not exist anymore. In <=
5.10 we would also skip the optimization under certain circumstances
(too many statementes, etc.). The fallback that is in place for handling
this at run-time tried to be smart by avoiding the
QQmlContextWrapper::get lookup and return straight a reference to the
singleton as QObject. That works for regular property lookups, but it
fails when trying to look up something like an enum, that isn't a
meta-object property.
Change-Id: I1819b9d8ae06a3f595e067bf5b018c4065be76bb
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
qtdeclarative/src/qml/jsruntime/qv4engine.cpp:913:78: error: ‘void* memcpy(void*, const void*, size_t)’ writing to an object of type ‘struct QV4::Property’ with no trivial copy-assignment [-Werror=class-memaccess]
memcpy(argumentsAccessors, oldAccessors, oldSize*sizeof(Property));
Change-Id: I6e3d6a1a26fda33aa47c315a183edba9dcd0c0b9
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
From now on we prefer nullptr instead of 0 to clarify cases where
we are assigning or testing a pointer rather than a numeric zero.
Also, replaced cases where 0 was passed as Qt::KeyboardModifiers
with Qt::NoModifier (clang-tidy replaced them with nullptr, which
waas wrong, so it was just as well to make the tests more readable
rather than to revert those lines).
Change-Id: I4735d35e4d9f42db5216862ce091429eadc6e65d
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
When the code generation capability is not set, the first call of
canAllocateExecutableMemory will cause a warning about suboptimal
performance. The qWarning code checks, which thread caused the message
and QThread::current sets QCoreApplicationPrivate;s theMainThread when
it is called for the first time on Windows.
If we call that function inside a static initializer, it will be called
before QCoreApplication is created and thus set the main thread to the
one that called the function. This will cause a warning about QApplication
not being created inside the main() thread, but more importantly,
delivering of events will not work in WinRT applications afterwards.
Task-number: QTBUG-66418
Change-Id: I3b6bf804983644b5ae5fe2288a587dc95fab2c8b
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
qv4sequenceobject.o is the largest single object in QtQml.so. This is
probably due to template and macro explosion. Not everyone will want to
pay this price to have Qt containers natively available in JS.
Change-Id: I7dc64566a653c865d5c1b6e4f21a3a9089db100a
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
This regressed in commit b56f7d6f79. We
need to choose the YARR JIT (as well as the regular JIT) only if we can
allocate executable memory.
Change-Id: I150238fda7b3699cb1d7ffedeeed3c6f3f54132b
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
So far we often began with the empty class again when creating
new internal classes. This allowed for multiple paths through the
internal class hierarchy ending up at the same internal class object.
But to be able to efficiently garbage collect internal classes, we
need to have only one path to each instance of an internal class.
Change-Id: Ic6c1f2b3d021e92b44f76a04a8886820e63e8f26
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
The only engine we ever ask for QJSEngine is QV4::ExecutionEngine.
Change-Id: Ia1354e552bddac72177b7aa62de5a7a502089841
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
As QJSEngine's handle() method is internal, we can redefine it to return
a pointer to an ExecutionEngine. That makes many things easier.
Change-Id: Ie3df99e0bad5f00ad4fe73182896cd135fa82994
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
After commit cae7975a03 the vtable became
part of the internal class, which meant that for allocating the
V4::QmlContext and the QV4::QmlContextWrapper we had one additional IC
transition upon allocation. We can avoid that by providing a default IC
for both types.
Task-number: QTBUG-65708
Change-Id: I22815a24a8389b59103309806f6ac4ca382405f0
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Convert most of the methods used QML objects to the new calling
convention. Converted IndexedBuiltinFunction to do the same.
Change-Id: I41b26042c2f56f24988485b06e8ccd214e2573c0
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
We generally have to pass a URL and a file name everywhere because the
logical URL might be something else than the actual file being loaded.
For example a QQmlFileSelector might modify the URL to be loaded for a
specific file. This resulting URL, however, should not be used to
resolve further URLs defined in the file loaded that way.
As we need to access QQmlTypeLoader::m_url as string more often now,
cache it and avoid frequent translations between QUrl and QString.
Furthermore, QQmlDataBlob's URLs are changed to follow the same
semantics. The finalUrl is the one that should be used to resolve
further URLs, the url is the one used to load the content, and subject
to any redirects or interceptions.
This changes the semantics of URL redirects. Previously a redirected URL
was used as the base URL for furher URL resolution. This doesn't work
because redirection occurs after interception and interception should
not influence the resolution of further URLs. We now use the original
URL as base URL for resolution of further URLs and rely on the server to
redirect those, too.
Task-number: QTBUG-61209
Change-Id: I93822f820bed2515995de3cb118099218b510ca4
Reviewed-by: Michael Brasser <michael.brasser@live.com>
This patch add a JIT back in for all platforms that supported JITting
before, with the exception of MIPS.
Change-Id: I51bc5ce3a2ac40e0510bd72a563af897c5b60343
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
ECMA-262 stipulates that date-only formats should be treated as UTC,
while date-times are handled as standard time, if no time zone is
explicitly given. Tidied up the parser a bit in the process and
documented what the spec says. Fixed some broken test-cases.
Handling of date-times without zone as local time is a correction
since edition 5.1 of ECMA-262 (which said to handle it as UTC):
http://www.ecma-international.org/ecma-262/7.0/index.html#sec-corrections-and-clarifications-in-ecmascript-2015-with-possible-compatibility-impact
We were previously handling both dates and date-times as local time,
violating the old spec for both and the revised spec for dates.
Task-number: QTBUG-56787
Change-Id: I557789d855b910ca6a859fca396af1a0205c9417
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Debug instructions are used to trigger break points and are added for
every source line.
We also need to insert Debug instructions before Ret, so that we can
step out. We also need to assign line numbers to the entry and return
points of "abbreviated" QML functions (by simulating lbrace and
rbrace) so that we can set break points on them. The line numbers on Ret
need to be negative, so that you cannot (accidentally) set break points
on them. A typical signal handler or binding in QML consists of only one
line and if you set a break point on that line, you want it to hit only
once, when entering the function. If the line numbers on Ret were
positive, it would be hit again on exit. Some of the tests in
tst_qqmldebugjs implicitly check for that.
Also the new interpreter does something on the left brace, so a
function actually starts there, not on the first statement.
Change-Id: Id9dfb20e35696b420d0950deab988f7cc5197bfc
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Instead of collecting all compilation units in a hash, let's collect
linked units in a doubly-linked lists that makes the removal at
destruction time dramatically cheaper.
Change-Id: I9fd59600d082be3566f605d90f14a86a58ac9296
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
A compilation unit that is unlinked may recursively unlink and delete
further compilation units belonging to the same engine via its
resolvedTypes property. Those units won't be able to remove themselves
from the cached set, and will therefore get their unlink() method
called again, this time on a dangling pointer, when the engine gets
around to them.
Change-Id: Icaa941ca2117c8303c49623b2be0f9014502d849
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
This avoids overflows in the markStack for test cases where
we have a huge amount of compilation units with many runtime
strings that all want to get marked.
Task-number: QTBUG-63063
Change-Id: I150c1f1a4065350cec59dd80c5c628920f70e3d0
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Accoding to the standard the regexp objects created by literals should
be separate objects as if calling new. We were violating that by caching
the same object for every instance of a literal.
This also fixes a problem with leaking values of lastIndex between
separate instances of the same global regexp literal.
Task-number: QTBUG-62175
Change-Id: Ib22e9ee68de1d1209fbd4212e72f576bc059d245
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
This avoids overflows in the markStack for test cases where
we have a huge amount of compilation units with many runtime
strings that all want to get marked.
Task-number: QTBUG-63063
Change-Id: I7c1df0fdb9afada1830f8c218a0e52ebcd093850
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: J-P Nurmi <jpnurmi@qt.io>
This way we don't have to manually initialize and delete them.
Change-Id: I0104c744dba380e957271d0924498e3643856e9e
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
The old map assumed that line numbers are always increasing, something
that isn't always true. So move to a format where we map blocks of
bytecode to a line number instead.
Change-Id: I1cd9dd1329d415122cd3d560294ef53007f879f8
Reviewed-by: Erik Verbruggen <erik.verbruggen@qt.io>
Don't emit any Line instructions anymore, and instead store
the info in a side table in the compiled data, where it can
be looked up on demand.
Change-Id: Idcaf3bf4ee4129fd62f9e717bf1277dc6a34fe19
Reviewed-by: Erik Verbruggen <erik.verbruggen@qt.io>
Part 1, where the callData member is moved to CallContext. We'll
get rid of it there in a subsequent commit.
Change-Id: I6218992802133913f7766ebb3d2f47bd29f33907
Reviewed-by: Erik Verbruggen <erik.verbruggen@qt.io>
Lars Knoll
Qt Forward Merge Bot
Simon Hausmann
Ville Voutilainen
Liang Qi
Shawn Rutledge
Oliver Wolff
Ulf Hermann
Erik Verbruggen
Edward Welbourne
Allan Sandfeld Jensen