Projects were modified using the tool at:
https://git.qt.io/alcroito/cmake_refactor
A few examples had to be adapted manually, mostly those that build
additional qml modules / plugins.
The INSTALL_EXAMPLESDIR and INSTALL_EXAMPLEDIR assignments were
removed, these are not needed anymore because example directory
selection is handled by the qt_internal_add_example calls.
The install(TARGETS) calls were modified according to our
documentation snippets for qt_generate_deploy_qml_app_script.
A qt_generate_deploy_qml_app_script call was added for each
executable target.
Note that the deployment step will be skipped in the CI for now,
because:
- we enable QT_DEPLOY_MINIMAL_EXAMPLES in the CI instructions and thus
set QT_INTERNAL_SKIP_DEPLOYMENT to true
- standalone examples feature is not yet enabled in the CI, which
means we continue to build examples in-tree, and deployment is
disabled for in-tree prefix builds.
A small list of examples to deploy in the CI will be chosen in the
future, to ensure deployment coverage, without slowing down overall CI
times due to all the *deployqt invocations.
Even if deployment is disabled in the CI, the install(TARGETS) calls
for each example will still run, installing into an
'installed_examples' directory, which will not be archived by the CI.
The QtBundleQmlModuleForMacOS and bundle_shared code was removed,
because we can now depend on the MACOS_BUNDLE_POST_BUILD option of the
deployment api, to ensure macOS bundle examples run properly in the
build dir. This works even in prefix in-tree builds, when installation
deployment is disabled.
Finally, for all examples that build additional qml module libraries or
plugins, the libraries / plugins must be installed into the bin dir of
each project, along with a qmldir file.
This is to support running the installed project for platforms that
don't have deployment api yet, like boot2qt / yocto.
If we want to have super clean install / deployment rules in the
future, we won't be able to avoid adding ugly per-platform conditions.
The current status quo is deemed an improvement over what we had
before.
Pick-to: 6.7
Task-number: QTBUG-101340
Task-number: QTBUG-102056
Task-number: QTBUG-102057
Change-Id: I843d934668c25dbcd1abca52495b393579633fc5
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
Example takes precedent over build system file type.
According to QUIP-18 [1], all examples file should be
LicenseRef-Qt-Commercial OR BSD-3-Clause
[1]: https://contribute.qt-project.org/quips/18
Pick-to: 6.7 6.7.0
Task-number: QTBUG-121787
Change-Id: Ie8c2539e7659f53a1fd6b48f99ee883ee9aeb0a7
Reviewed-by: Kai Köhne <kai.koehne@qt.io>
The size policy of item updated as part of task QTBUG-117597. This
patch update existing examples and manual tests that depends on quick
layout to embrace size policy change.
Task-number: QTBUG-117597
Pick-to: 6.7
Change-Id: I68469a3bba3c4d3e5ed4b6eae0fd765b5206efc0
Reviewed-by: Jan Arve Sæther <jan-arve.saether@qt.io>
Use e.g. Qt6::Core instead of Qt::Core. This is better matching the
find_package(Qt6 ...) call, and also avoids issues that the versionless
targets have.
Pick-to: 6.5
Task-number: QTBUG-113277
Change-Id: Ib80f885e9f73fb9ad54b9e9b22cae2318877dc07
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Also, drop all the VERSION 1.0 lines from the examples and tests. 1.0 is
actually a bad default version since it's before all the Qt versions.
[ChangeLog][QML] You can now omit the VERSION argument to
qt_add_qml_module(). This will automatically generate the highest
possible version.
Pick-to: 6.5
Task-number: QTBUG-99146
Change-Id: Ic10ec69b87c224e0e94e1785f65653815d4c778c
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Sami Shalayel <sami.shalayel@qt.io>
GameOfLifeModel is a QAIM, but qmllint does not know what QAIM is by
default. Make it aware of it by explicitly depending on QtQml.Models.
Then fix the Layout related warnings found by the Quick lint plugin:
- remove the superfluous x and y values in the slider,
- and remove the empty padding Item in lieu of setting
Layout.rightMargin on the Button to achieve the same effect.
Change-Id: I2ef6f9a1ffa276b66415ce3374eb41c34d8673b6
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
CMakeLists.txt and .cmake files of significant size
(more than 2 lines according to our check in tst_license.pl)
now have the copyright and license header.
Existing copyright statements remain intact
Task-number: QTBUG-88621
Change-Id: I72c89a98c42bbc9234d8495e9e503bec81d11037
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
Replace the current license disclaimer in files by
a SPDX-License-Identifier.
Files that have to be modified by hand are modified.
License files are organized under LICENSES directory.
Pick-to: 6.4
Task-number: QTBUG-67283
Change-Id: I63563bbeb6f60f89d2c99660400dca7fab78a294
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
- Remove # generated from xyz.pro comment from pro2cmake
- Remove "# special case" markers for pro2cmake
- Remove automatic use of CMAKE_AUTORCC
- Only opt into CMAKE_AUTOUIC if .ui files are involved
- Remove explicit setting of CMAKE_INCLUDE_CURRENT_DIR
- Combine multiple find_package(Qt6 ... calls)
- use REQUIRED COMPONENTS
- sort components alphabetically
- Fix wrong indentations
- Use (only) one empty line after multi-line commands
Pick-to: 6.3
Change-Id: I0d6bfb06c4b25e9921d3d2bf31d977150f12b31b
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
This is a pre-requisite to being able to make
qt6_qml_type_registration() an internal rather than public command.
Not all examples have been updated, only those that were using the
qt6_qml_type_registration() command.
Task-number: QTBUG-95093
Pick-to: 6.2
Change-Id: I3f1814a29af608461daa90477eca0aa2304eb9d1
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
It's a static method. It should be called statically.
Change-Id: I15fc8948988b0a2c0a30f8699949e06c66d92fdf
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
As well as the MACOSX_BUNDLE properties as necessary.
Task-number: QTBUG-87664
Task-number: QTBUG-86827
Change-Id: I46769fb543acb2cbeba122470b5e44ad478fbe4e
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
that don't have an explicit QT_QML_MODULE_INSTALL_DIR path
specified. We don't want to pollute the Qt qml import path with
these files.
Task-number: QTBUG-84403
Change-Id: I768267e0e79daa8090d882c301648cce14e1a809
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Includes
- new example installation paths
- one case of QT_QMLTYPES_FILENAME addition
Change-Id: I24423da9b04b6ecc8445017fa35f148dd43b1829
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
In particular, use required properties where applicable, explicitly
import QtQml where we use it, avoid unqualified access into the root
scope of a component, use JavaScript functions with explicit parameters
as signal handlers.
Change-Id: I3eaaba47cc3c7a2a12d488e36f9eec145cedbb0e
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Now that we can generate all QML type information at build time, we
should also use it.
Change-Id: I647c72bbe38fdb2deb565b75c86a696af3d15b61
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Removed dependencies.yaml because we don't use it yet in wip/cmake.
Fixed conflict in qmlcachegen.cpp.
Change-Id: Ie1060c737bee1daa85779903598e5b6d5020d922
Using this technique we can automatically register all necessary
revisions and minor versions of a type, using the metaobject system.
This greatly reduces the potential for mistakes and resulting
incompatibilities between versions of imports.
We assume that for each type we need to register all revisions of its
super types and its attached type, and that the revisions match. That
is, if you import version X of type A, you will also get version X of
its attached type and of any super types. As we previously didn't take
these dependencies into account when manually registering the types, a
number of extra revisions are now registered for some types.
Potentially, we can now generate the qmltypes files at compile time,
using moc.
Change-Id: I7abb8a5c39f5e63ad1a0cb41a783f2c91909491b
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
This patch converts all examples in qtdeclarative except for a few
exceptions which require a public facing qml plugin api.
Change-Id: I2cd2b1bb455be8b48796893a8235dea7f8b35aa2
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Flickable::fixup() will be called from Flickable::componentComplete().
fixup() is a virtual function that subclasses can override to e.g
ensure that cells snap to grid etc (which is not yet supported by
TableView). The default implementation will check if the assigned
contentX/Y is within the current content item size, and adjust it
back to 0,0 if not. The problem is that during componentComplete(), the
table has not yet been built. And we don't want Flickable to reset
any assignments to contentX/Y until that has happened. So override the
function and block it from doing any adjustments before the table has
been built.
Change-Id: Id6c5a3b5f053f71bf1854573cd5b9dc3ecc9f246
Reviewed-by: Mitch Curtis <mitch.curtis@qt.io>
Overriding contentWidth/Height was done to be able to force build the
table early if the app needed to know the size of the table already at
Component.onCompleted (to e.g center the viewport on the center of
the table). But now that we have a forceLayout() function, it's better
to require that that function should be called before querying
contentWidth/Height at this stage.
By not building the table on the fly, we allow the application to
bind expressions directly to contentWidth/Height, without being concerned
about potential binding loops that can occur as a result of us
rebuilding the whole table behind his back. The benefit of this overshadows
the need to call forceLayout() explicit for some corner cases.
Note that we still redefine the contentWidth/Height properties in TableView
so that we can catch if the application sets an explicit contentWidth/Height
(which is tested by checkExplicitContentWidthAndHeight()).
Change-Id: Ic4499b3939af1cb3a543e4c006023d0d6f12fd3b
Reviewed-by: Mitch Curtis <mitch.curtis@qt.io>
Otherwise TableView will not be available.
Change-Id: I57fe6ae5dd28064f87dca8cb4c3b957de25713e1
Reviewed-by: Nicolas Ettlin <nicolas.ettlin@me.com>
Reviewed-by: hjk <hjk@qt.io>
TableView is now ready for Qt-5.12. The only thing missing
is documentation, which is currently being written, and on the
way. So remove the temporary labs plugin that used to register
TableView, and register it together with the other QtQuick items.
Change-Id: I7f360eac3934d228904a4133363e336afe0c451a
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
This new example shows how a Conway's Game of Life implementation can
be created with QML and the new TableView component.
Change-Id: I940210c5e5a0554e6f052ff109070e69e59cab56
Reviewed-by: hjk <hjk@qt.io>
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
This makes more room for more tableview examples.
I also added the tableview directory to the quick.pro subdirs.
Change-Id: Ia136150ded99c2ec627e122aa676e24a519683a9
Reviewed-by: hjk <hjk@qt.io>
Example of a QML TableView with custom table model.
Inspired from the original pixelator example from the widget world.
Change-Id: Ic33e6d2e9320fe135d56dde92326dd8a606fe109
Reviewed-by: Mitch Curtis <mitch.curtis@qt.io>
Alexandru Croitor
Lucie Gérard
Santhosh Kumar
Jaishree Vyas
Kai Köhne
Oliver Eftevaag
Ulf Hermann
Fabian Kosmale
Craig Scott
Joerg Bornemann
Tor Arne Vestbø
Leander Beernaert
Paul Wicking
Richard Moe Gustavsen
Nicolas Ettlin
Michael Winkelmann