According to QUIP-18 [1], all test files should be
LicenseRef-Qt-Commercial OR GPL-3.0-only
[1]: https://contribute.qt-project.org/quips/18
Pick-to: 6.7
Task-number: QTBUG-121787
Change-Id: I26d72e8de04d4c7c57b3b7838af5d033265de5ba
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Reviewed-by: Kai Köhne <kai.koehne@qt.io>
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
Replace the current license disclaimer in files by
a SPDX-License-Identifier.
Files that have to be modified by hand are modified.
License files are organized under LICENSES directory.
Pick-to: 6.4
Task-number: QTBUG-67283
Change-Id: I63563bbeb6f60f89d2c99660400dca7fab78a294
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Previously each test would include and build sources from the shared
folder. Now we make those sources a library, build it once, then have
each test link to it instead.
We also take the opportunity to move some helpers that qtquickcontrols2
had added into the quicktestutils library where it makes sense, and
for the helpers that don't make sense to be there, move them into
quickcontrolstestutils.
We add the libraries to src/ so that they are internal modules built as
part of Qt, rather than tests. That way we can use them in a standalone
test outside of qtdeclarative.
Task-number: QTBUG-95621
Pick-to: 6.2
Change-Id: I0a2ab3976fdbff2e4414df7bdc0808f16453b80a
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
QRegExp will get removed in Qt6. Clean up by removing dependencies
on QRegExp in the autotests.
Change-Id: I8ef8561ba30b98b61cd9ed52907b48c5969f2c49
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
In XMLHttpRequest, we need to get the QNetworkAccessManager from the
engine. However, if the request originates from a WorkerScript, there
exists no qmlEngine. We therefore add a new indirection to access the
QNAM, and set it up accordinly in registerWorkerScript.
Fixes: QTBUG-81055
Change-Id: I8915202b6d6b7139c8386304b3d1d7a22a82045e
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
It's rather strange that we so far could serialize lists of QUrls but not single
QUrls. With this change in place we can remove the hack that exposes
QUrls in sequence objects as strings.
Change-Id: Ide898b1942deda92142331773ed5637871ca7ab1
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Previously it was impossible to determine whether a WorkerScript has
been fully initialized. This commit introduces a ready property that
allows outside Components to determine whether it is safe to send
signals.
Fixes: QTBUG-80413
Change-Id: I2a1892b5e759e317de791e71d79fbb0cbd320dd3
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
QRegularExpression is the recommended way to do regular expressions
nowadays. Support assignment of JavaScript regular expressions to
QRegularExpression properties of QObjects and the other way around.
QJSValue::toVariant() will create a QRegularExpression from a JavaScript
RegExp by default now.
[ChangeLog][QtQml][Important Behavior Changes] QRegularExpression is now
supported the same way QRegExp is in QML. QJSValue::toVariant() creates
a QRegularExpression variant rather than a QRegExp one from a JavaScript
regular expression now.
Fixes: QTBUG-73429
Change-Id: I301a02771cd17903406c2bc5c7aaeca6cce629f0
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Similar to script imports from .qml files, the .mjs extension is used to
distinguish between ES modules and plain script files.
Change-Id: Id5f9b59fb77e99e3c9d6a404e6d091d96b501ad6
Reviewed-by: Mitch Curtis <mitch.curtis@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Now that we have one JS engine per worker script, we can get rid of the
per-script QML context and let the script simply run in the global
object, which is now also mutable.
Change-Id: I36d8616b85b2c0ff3a356ee7be9d242c3da624cf
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
From now on we prefer nullptr instead of 0 to clarify cases where
we are assigning or testing a pointer rather than a numeric zero.
Also, replaced cases where 0 was passed as Qt::KeyboardModifiers
with Qt::NoModifier (clang-tidy replaced them with nullptr, which
waas wrong, so it was just as well to make the tests more readable
rather than to revert those lines).
Change-Id: I4735d35e4d9f42db5216862ce091429eadc6e65d
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
This saves another pointer on all Objects.
Currently introduces a slight performance regression
on some of the v8 benchmarks, that needs addressing.
Change-Id: I87de8e1d198d2683f4e903c467ce2a60ba542243
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
From Qt 5.7 -> tools & applications are lisenced under GPL v3 with some
exceptions, see
http://blog.qt.io/blog/2016/01/13/new-agreement-with-the-kde-free-qt-foundation/
Updated license headers to use new GPL-EXCEPT header instead of LGPL21 one
(in those files which will be under GPL 3 with exceptions)
Change-Id: I04760a0801837cfc516d1c7c02d4f503f6bb70b6
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
The test was not getting a new warning as assumed, but still
reading the old warning from a few lines before. This mirrors
the intended behavior.
Change-Id: I7211923e378db34cdc5f8c1c78f3cfb1bea548d2
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Qt copyrights are now in The Qt Company, so we could update the source
code headers accordingly. In the same go we should also fix the links to
point to qt.io.
Change-Id: I61120571787870c0ed17066afb31779b1e6e30e9
Reviewed-by: Iikka Eklund <iikka.eklund@theqtcompany.com>
[ChangeLog][QtQml][Important Behavior Changes] When a JavaScript object/array
is passed to C++ through a QVariant, the engine no longer immediately converts
the object recursively into a QVariantMap or QVariantList but instead stores
a QJSValue in the QVariant. This prevents a loss of data when the JS object
contains non-primitive types such as function objects for example. Code that
expects the variant type to be exactly QVariant::Map or QVariant::List may
need to be adapted. Registered conversion functions however ensure that code
that merely calls toMap() or toList() continues to work.
Task-number: QTBUG-40431
Change-Id: I1dbc1d5f8e78ad28bb62db3681b9a0b34557e7f5
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
They're already in the QtQml module, but were left in the QtQuick import
because they were considered to be of minimal use without QtQuick types.
QtQml types are being developed would could make ListModel useful
without QtQuick, indicating that they should no longer be considered
QtQuick depedent.
Change-Id: I31499f2cc23baf4bc70fb451ba164408bed89ff6
Reviewed-by: Andrew den Exter <andrew.den.exter@qinetic.com.au>
Change copyrights and license headers from Nokia to Digia
Change-Id: Ie7f5d49ed8235d7a7845ab68f99ad1c220e64d5c
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Instead of "Can't find variable: foo", use "foo is not defined".
This is in preparation of letting V8 throw the exception when a
property lookup fails on the QML scope object (needed for
QTBUG-24448).
Change-Id: I3c747482a8ef138dad9a85530a4f6b5c4c818a03
Reviewed-by: Aaron Kennedy <aaron.kennedy@nokia.com>
Symbols beginning with QDeclarative are already exported
by the quick1 module.
Users can apply the bin/rename-qtdeclarative-symbols.sh
script to modify client code using the previous names of the
renamed symbols.
Task-number: QTBUG-23737
Change-Id: Ifaa482663767634931e8711a8e9bf6e404859e66
Reviewed-by: Martin Jones <martin.jones@nokia.com>
Ulf Hermann
Lucie Gérard
Amanda Hamblin-Trué
Mitch Curtis
Lars Knoll
Qt Forward Merge Bot
Fabian Kosmale
Maximilian Goldstein
Friedemann Kleint
Simon Hausmann
Shawn Rutledge
Jani Heikkinen
Lars Knoll
Simon Hausmann
Jani Heikkinen
Michael Brasser
Oswald Buddenhagen
Lars Knoll
Sze Howe Koh
Alan Alpert
Sergio Ahumada
Iikka Eklund
Kai Koehne
Kent Hansen
Matthew Vogt