qiurui
/
qtbase
mirror of https://github.com/qt/qtbase.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
qtbase/cmake/QtBuildInternals/QtBuildInternalsConfig.cmake

299 lines
12 KiB
CMake
Raw Normal View History

Use the qt_build_repo() macros for building qtbase as well To implement this, create a new Qt5BuildInternals package. All child Qt modules like qtsvg should use find_package(Qt5BuildInternals) or find_package(Qt5 COMPONENTS BuildInternals) in the their top level CMakeLists.txt. This will make the qt_build_repo() macros available. For qtbase we slightly cheat, and specify a CMAKE_PREFIX_PATH pointing to the source folder that contains the BuildInternals package. For the other modules we actually use a configured and installed package Config file. This change moves variables that used to be written into the QtCore Config file into the BuildInternals package. This way things that are relevant only for building additional Qt modules does not pollute the QtCore package. Task-number: QTBUG-75580 Change-Id: I5479adff2f7903c9c2862d28c05c7f485ce3e4eb Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
2019-05-15 11:57:15 +00:00
if (CMAKE_VERSION VERSION_LESS 3.1.0)
message(FATAL_ERROR "Qt requires at least CMake version 3.1.0")
endif()
######################################
#
# Macros for building Qt modules
#
######################################
if(EXISTS "${CMAKE_CURRENT_LIST_DIR}/QtBuildInternalsExtra.cmake")
include(${CMAKE_CURRENT_LIST_DIR}/QtBuildInternalsExtra.cmake)
endif()
Allow building the tests directory as a standalone CMake project At the moment, Coin builds tests as a separate qmake invocation against an installed Qt. We need to support the same with CMake. Change the tests subdirectory to be a standalone CMake project when CMake does not detect an existing QtTest target while processing the subdirectory. If the target exists, it means we are building the whole repo, if the target does not exist, we need to call find_package to find the installed Qt. Refactor and move around a few things to make standalone tests build successfully: - add a new macro to set up paths to find QtSetup - add a new macro to find all macOS frameworks - add a new macro to set up building tests - add a new macro that actually builds the tests - export the INSTALL_CMAKE_NAMESPACE value into the BuildInternals Config file - export the CMAKE_BUILD_TYPE value, because a test project doesn't have a .git subdir and thus defaults to be built in Release mode, even though qtbase might have been built in Debug, so to avoid the mixing, the propagate the build type - stop overriding INSTALL_CMAKE_NAMESPACE and QT_CMAKE_EXPORT_NAMESPACE inside QtSetup if they are set, because the tests project doesn't specify a major version, and if we override the values, the moc / uic targets don't get the correct major version prefix and configuration fails Change-Id: Ibdb03687302567fe325a15f6d1cb922c76240675 Fixes: QTBUG-75090 Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
2019-05-22 08:22:08 +00:00
macro(qt_set_up_build_internals_paths)
Include QtPlatformSupport as part of find_package(Qt6BuildInternals) This is needed because the ported over requires() clauses from qmake to CMake are executed before qt_repo_build(), which means that all the custom platform variables that we set (like LINUX, APPLE_OSX) need to be available immediately after finding BuildInternals. Change-Id: I7345b69edf72c266508846766e64f42c99862d1d Reviewed-by: Qt CMake Build Bot Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
2019-09-26 15:58:53 +00:00
# Set up the paths for the cmake modules located in the prefix dir. Prepend, so the paths are
Use $$source_path/qtbase/cmake modules when doing non-prefix builds This is similar to qmake, where the .prf files from the source location of qtbase/mkspecs are used in a non-prefix build. This means that if a developer changes the source QtBuild.cmake, and then runs make in qtdeclarative, cmake will reconfigure qtdeclarative because the timestamp of QtBuild.cmake changed. Before this change you first had to make && make install in the qtbase build directory, before qtdeclarative saw the modified QtBuild.cmake. This change also makes the module paths be prepended to CMAKE_MODULE_PATH instead of appended, which means they will take precedence to any path provided via command line. Change-Id: I9178d5183a95b3b67bfe1b1fe91d3d3371ffe5c5 Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
2019-09-05 16:17:00 +00:00
# least important compared to the source dir ones, but more important than command line
# provided ones.
Allow building the tests directory as a standalone CMake project At the moment, Coin builds tests as a separate qmake invocation against an installed Qt. We need to support the same with CMake. Change the tests subdirectory to be a standalone CMake project when CMake does not detect an existing QtTest target while processing the subdirectory. If the target exists, it means we are building the whole repo, if the target does not exist, we need to call find_package to find the installed Qt. Refactor and move around a few things to make standalone tests build successfully: - add a new macro to set up paths to find QtSetup - add a new macro to find all macOS frameworks - add a new macro to set up building tests - add a new macro that actually builds the tests - export the INSTALL_CMAKE_NAMESPACE value into the BuildInternals Config file - export the CMAKE_BUILD_TYPE value, because a test project doesn't have a .git subdir and thus defaults to be built in Release mode, even though qtbase might have been built in Debug, so to avoid the mixing, the propagate the build type - stop overriding INSTALL_CMAKE_NAMESPACE and QT_CMAKE_EXPORT_NAMESPACE inside QtSetup if they are set, because the tests project doesn't specify a major version, and if we override the values, the moc / uic targets don't get the correct major version prefix and configuration fails Change-Id: Ibdb03687302567fe325a15f6d1cb922c76240675 Fixes: QTBUG-75090 Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
2019-05-22 08:22:08 +00:00
set(QT_CMAKE_MODULE_PATH "${QT_BUILD_INTERNALS_PATH}/../${QT_CMAKE_EXPORT_NAMESPACE}")
Use $$source_path/qtbase/cmake modules when doing non-prefix builds This is similar to qmake, where the .prf files from the source location of qtbase/mkspecs are used in a non-prefix build. This means that if a developer changes the source QtBuild.cmake, and then runs make in qtdeclarative, cmake will reconfigure qtdeclarative because the timestamp of QtBuild.cmake changed. Before this change you first had to make && make install in the qtbase build directory, before qtdeclarative saw the modified QtBuild.cmake. This change also makes the module paths be prepended to CMAKE_MODULE_PATH instead of appended, which means they will take precedence to any path provided via command line. Change-Id: I9178d5183a95b3b67bfe1b1fe91d3d3371ffe5c5 Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
2019-09-05 16:17:00 +00:00
list(PREPEND CMAKE_MODULE_PATH "${QT_CMAKE_MODULE_PATH}")
Implement qtbase fixes for superbuilds Change-Id: I0d3445cf0740e3925fa9342dac4d07892518afe5 Reviewed-by: Qt CMake Build Bot Reviewed-by: Cristian Adam <cristian.adam@qt.io>
2019-11-21 12:33:28 +00:00
# Prepend the qtbase source cmake directory to CMAKE_MODULE_PATH,
Use $$source_path/qtbase/cmake modules when doing non-prefix builds This is similar to qmake, where the .prf files from the source location of qtbase/mkspecs are used in a non-prefix build. This means that if a developer changes the source QtBuild.cmake, and then runs make in qtdeclarative, cmake will reconfigure qtdeclarative because the timestamp of QtBuild.cmake changed. Before this change you first had to make && make install in the qtbase build directory, before qtdeclarative saw the modified QtBuild.cmake. This change also makes the module paths be prepended to CMAKE_MODULE_PATH instead of appended, which means they will take precedence to any path provided via command line. Change-Id: I9178d5183a95b3b67bfe1b1fe91d3d3371ffe5c5 Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
2019-09-05 16:17:00 +00:00
# so that if a change is done in cmake/QtBuild.cmake, it gets automatically picked up when
# building qtdeclarative, rather than having to build qtbase first (which will copy
# QtBuild.cmake to the build dir). This is similar to qmake non-prefix builds, where the
# source qtbase/mkspecs directory is used.
Implement qtbase fixes for superbuilds Change-Id: I0d3445cf0740e3925fa9342dac4d07892518afe5 Reviewed-by: Qt CMake Build Bot Reviewed-by: Cristian Adam <cristian.adam@qt.io>
2019-11-21 12:33:28 +00:00
if(EXISTS "${QT_SOURCE_TREE}/cmake")
Use $$source_path/qtbase/cmake modules when doing non-prefix builds This is similar to qmake, where the .prf files from the source location of qtbase/mkspecs are used in a non-prefix build. This means that if a developer changes the source QtBuild.cmake, and then runs make in qtdeclarative, cmake will reconfigure qtdeclarative because the timestamp of QtBuild.cmake changed. Before this change you first had to make && make install in the qtbase build directory, before qtdeclarative saw the modified QtBuild.cmake. This change also makes the module paths be prepended to CMAKE_MODULE_PATH instead of appended, which means they will take precedence to any path provided via command line. Change-Id: I9178d5183a95b3b67bfe1b1fe91d3d3371ffe5c5 Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
2019-09-05 16:17:00 +00:00
list(PREPEND CMAKE_MODULE_PATH "${QT_SOURCE_TREE}/cmake")
endif()
Allow building the tests directory as a standalone CMake project At the moment, Coin builds tests as a separate qmake invocation against an installed Qt. We need to support the same with CMake. Change the tests subdirectory to be a standalone CMake project when CMake does not detect an existing QtTest target while processing the subdirectory. If the target exists, it means we are building the whole repo, if the target does not exist, we need to call find_package to find the installed Qt. Refactor and move around a few things to make standalone tests build successfully: - add a new macro to set up paths to find QtSetup - add a new macro to find all macOS frameworks - add a new macro to set up building tests - add a new macro that actually builds the tests - export the INSTALL_CMAKE_NAMESPACE value into the BuildInternals Config file - export the CMAKE_BUILD_TYPE value, because a test project doesn't have a .git subdir and thus defaults to be built in Release mode, even though qtbase might have been built in Debug, so to avoid the mixing, the propagate the build type - stop overriding INSTALL_CMAKE_NAMESPACE and QT_CMAKE_EXPORT_NAMESPACE inside QtSetup if they are set, because the tests project doesn't specify a major version, and if we override the values, the moc / uic targets don't get the correct major version prefix and configuration fails Change-Id: Ibdb03687302567fe325a15f6d1cb922c76240675 Fixes: QTBUG-75090 Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
2019-05-22 08:22:08 +00:00
# If the repo has its own cmake modules, include those in the module path.
if(EXISTS "${CMAKE_CURRENT_SOURCE_DIR}/cmake")
Use $$source_path/qtbase/cmake modules when doing non-prefix builds This is similar to qmake, where the .prf files from the source location of qtbase/mkspecs are used in a non-prefix build. This means that if a developer changes the source QtBuild.cmake, and then runs make in qtdeclarative, cmake will reconfigure qtdeclarative because the timestamp of QtBuild.cmake changed. Before this change you first had to make && make install in the qtbase build directory, before qtdeclarative saw the modified QtBuild.cmake. This change also makes the module paths be prepended to CMAKE_MODULE_PATH instead of appended, which means they will take precedence to any path provided via command line. Change-Id: I9178d5183a95b3b67bfe1b1fe91d3d3371ffe5c5 Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
2019-09-05 16:17:00 +00:00
list(PREPEND CMAKE_MODULE_PATH "${CMAKE_CURRENT_SOURCE_DIR}/cmake")
Allow building the tests directory as a standalone CMake project At the moment, Coin builds tests as a separate qmake invocation against an installed Qt. We need to support the same with CMake. Change the tests subdirectory to be a standalone CMake project when CMake does not detect an existing QtTest target while processing the subdirectory. If the target exists, it means we are building the whole repo, if the target does not exist, we need to call find_package to find the installed Qt. Refactor and move around a few things to make standalone tests build successfully: - add a new macro to set up paths to find QtSetup - add a new macro to find all macOS frameworks - add a new macro to set up building tests - add a new macro that actually builds the tests - export the INSTALL_CMAKE_NAMESPACE value into the BuildInternals Config file - export the CMAKE_BUILD_TYPE value, because a test project doesn't have a .git subdir and thus defaults to be built in Release mode, even though qtbase might have been built in Debug, so to avoid the mixing, the propagate the build type - stop overriding INSTALL_CMAKE_NAMESPACE and QT_CMAKE_EXPORT_NAMESPACE inside QtSetup if they are set, because the tests project doesn't specify a major version, and if we override the values, the moc / uic targets don't get the correct major version prefix and configuration fails Change-Id: Ibdb03687302567fe325a15f6d1cb922c76240675 Fixes: QTBUG-75090 Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
2019-05-22 08:22:08 +00:00
endif()
cmake: Include repo-specific setup files This is useful for providing private CMake API which is not part of QtBase. Also, fix the setup files to be included when building standalone tests. The old ${PROJECT_NAME}Setup.cmake file inclusion will be removed once all usages are adjusted. Prompted-by: Alexandru Croitor <alexandru.croitor@qt.io> Change-Id: I5bc2bca7371660c00b0301e94d025a29b68d6975 Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
2019-09-20 13:20:57 +00:00
# Find the cmake files when doing a standalone tests build.
if(EXISTS "${CMAKE_CURRENT_SOURCE_DIR}/../cmake")
list(PREPEND CMAKE_MODULE_PATH "${CMAKE_CURRENT_SOURCE_DIR}/../cmake")
endif()
Allow building the tests directory as a standalone CMake project At the moment, Coin builds tests as a separate qmake invocation against an installed Qt. We need to support the same with CMake. Change the tests subdirectory to be a standalone CMake project when CMake does not detect an existing QtTest target while processing the subdirectory. If the target exists, it means we are building the whole repo, if the target does not exist, we need to call find_package to find the installed Qt. Refactor and move around a few things to make standalone tests build successfully: - add a new macro to set up paths to find QtSetup - add a new macro to find all macOS frameworks - add a new macro to set up building tests - add a new macro that actually builds the tests - export the INSTALL_CMAKE_NAMESPACE value into the BuildInternals Config file - export the CMAKE_BUILD_TYPE value, because a test project doesn't have a .git subdir and thus defaults to be built in Release mode, even though qtbase might have been built in Debug, so to avoid the mixing, the propagate the build type - stop overriding INSTALL_CMAKE_NAMESPACE and QT_CMAKE_EXPORT_NAMESPACE inside QtSetup if they are set, because the tests project doesn't specify a major version, and if we override the values, the moc / uic targets don't get the correct major version prefix and configuration fails Change-Id: Ibdb03687302567fe325a15f6d1cb922c76240675 Fixes: QTBUG-75090 Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
2019-05-22 08:22:08 +00:00
endmacro()
Include QtPlatformSupport as part of find_package(Qt6BuildInternals) This is needed because the ported over requires() clauses from qmake to CMake are executed before qt_repo_build(), which means that all the custom platform variables that we set (like LINUX, APPLE_OSX) need to be available immediately after finding BuildInternals. Change-Id: I7345b69edf72c266508846766e64f42c99862d1d Reviewed-by: Qt CMake Build Bot Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
2019-09-26 15:58:53 +00:00
# Set up the build internal paths unless explicitly requested not to.
if(NOT QT_BUILD_INTERNALS_SKIP_CMAKE_MODULE_PATH_ADDITION)
qt_set_up_build_internals_paths()
endif()
Use the qt_build_repo() macros for building qtbase as well To implement this, create a new Qt5BuildInternals package. All child Qt modules like qtsvg should use find_package(Qt5BuildInternals) or find_package(Qt5 COMPONENTS BuildInternals) in the their top level CMakeLists.txt. This will make the qt_build_repo() macros available. For qtbase we slightly cheat, and specify a CMAKE_PREFIX_PATH pointing to the source folder that contains the BuildInternals package. For the other modules we actually use a configured and installed package Config file. This change moves variables that used to be written into the QtCore Config file into the BuildInternals package. This way things that are relevant only for building additional Qt modules does not pollute the QtCore package. Task-number: QTBUG-75580 Change-Id: I5479adff2f7903c9c2862d28c05c7f485ce3e4eb Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
2019-05-15 11:57:15 +00:00
Include QtPlatformSupport as part of find_package(Qt6BuildInternals) This is needed because the ported over requires() clauses from qmake to CMake are executed before qt_repo_build(), which means that all the custom platform variables that we set (like LINUX, APPLE_OSX) need to be available immediately after finding BuildInternals. Change-Id: I7345b69edf72c266508846766e64f42c99862d1d Reviewed-by: Qt CMake Build Bot Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
2019-09-26 15:58:53 +00:00
# Define some constants to check for certain platforms, etc.
# Needs to be loaded before qt_repo_build() to handle require() clauses before even starting a repo
# build.
include(QtPlatformSupport)
CMake: Provide script to configure and build one or more tests Before this patch there were a few ways to build tests - Configure all tests as part of the repo build - Configure all tests as part of the repo build, but don't build tests by default (-DQT_NO_MAKE_TESTS=ON) - Configure all tests as a standalone project in a separate build dir using -QT_BUILD_STANDALONE_TESTS=ON All of the above incur some time overhead due to the necessity of configuring all tests. Sometimes you just want to build ONE test (or a few). To facilitate that use case, a new shell script called bin/qt-cmake-standalone-test(.bat) can now be used to configure and build one or more tests. The script takes one single argument pointing to the desired test project path and configures a generic template project that sets up all the necessary Qt CMake private API, afterwards calling add_subdirectory on the passed in project. Example $ path/to/qt/bin/qt-cmake-standalone-test ./tests/auto/gui/image/qicon or $ path/to/qt/bin/qt-cmake-standalone-test ./tests/auto/gui/image After that, simply run 'ninja && ctest' to build and run the test(s). This is the CMake equivalent of calling qmake on a test .pro file (or on a tests SUBDIRS .pro file) There are 3 details worth mentioning. Due to the add_subdirectory call, the built artifacts will not be in the top-level build dir, but rather in a nested build_dir. The script currently can't handle more than one argument (the path to the project), so you can't pass additional -DFoo=bar arguments. If a test uses a 3rd party library (like Threads::Threads) which was not a public dependency for any of the Qt modules, configuration will fail saying that the target was not found. Perhaps we should consider recording these packages when generating the StandaloneConfig.cmake files. Change-Id: Icde6ecb839341d34f341d9a19402c91196ed5aa0 Reviewed-by: Leander Beernaert <leander.beernaert@qt.io> Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
2020-03-18 18:09:00 +00:00
macro(qt_build_internals_set_up_private_api)
Use the qt_build_repo() macros for building qtbase as well To implement this, create a new Qt5BuildInternals package. All child Qt modules like qtsvg should use find_package(Qt5BuildInternals) or find_package(Qt5 COMPONENTS BuildInternals) in the their top level CMakeLists.txt. This will make the qt_build_repo() macros available. For qtbase we slightly cheat, and specify a CMAKE_PREFIX_PATH pointing to the source folder that contains the BuildInternals package. For the other modules we actually use a configured and installed package Config file. This change moves variables that used to be written into the QtCore Config file into the BuildInternals package. This way things that are relevant only for building additional Qt modules does not pollute the QtCore package. Task-number: QTBUG-75580 Change-Id: I5479adff2f7903c9c2862d28c05c7f485ce3e4eb Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
2019-05-15 11:57:15 +00:00
# Qt specific setup common for all modules:
include(QtSetup)
include(FeatureSummary)
Optionally include ${repo}Setup.cmake file in qt_build_repo_begin This is meant to keep repo specific functions and macros that should not pollute QtSetup.cmake. For example QtDeclarativeSetup.cmake will automatically be included when building qtdeclarative. Change-Id: I4d26cbb1a7ffafb153a888fc918af337000d5e41 Reviewed-by: Simon Hausmann <simon.hausmann@qt.io> Reviewed-by: Qt CMake Build Bot
2019-05-28 11:33:42 +00:00
# Optionally include a repo specific Setup module.
include(${PROJECT_NAME}Setup OPTIONAL)
cmake: Include repo-specific setup files This is useful for providing private CMake API which is not part of QtBase. Also, fix the setup files to be included when building standalone tests. The old ${PROJECT_NAME}Setup.cmake file inclusion will be removed once all usages are adjusted. Prompted-by: Alexandru Croitor <alexandru.croitor@qt.io> Change-Id: I5bc2bca7371660c00b0301e94d025a29b68d6975 Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
2019-09-20 13:20:57 +00:00
include(QtRepoSetup OPTIONAL)
Automatically find apple frameworks when building a repo Instead of doing it just in qtbase/src, we need to do it for all repos before building ./src. Change-Id: I57f226b849cd5370ffbbbea8a694697d400957a4 Reviewed-by: Leander Beernaert <leander.beernaert@qt.io> Reviewed-by: Liang Qi <liang.qi@qt.io>
2019-06-13 13:55:38 +00:00
# Find Apple frameworks if needed.
qt_find_apple_system_frameworks()
Make standalone tests build via top level repo project Previously repo/tests/CMakeLists.txt was a standalone project on which CMake could be called. This was useful for Coin to be able to build and package only tests, but was a bit troublesome because that means having to specify the usual boilerplate like minimum CMake version, which packages to find in every tests.pro project. Instead of having a separate standalone project, modify the top level project and associated CMake code to allow passing a special QT_BUILD_STANDALONE_TESTS variable, which causes the top level project to build only tests, and find Qt in the previously installed qt location. This also means that when building a repo, we generate a ${repo_name}TestsConfig.cmake file which does find_package on all the modules that have been built as part of that repo. So that when standalone tests bare built for that repo, the modules are automatically found. qt_set_up_standalone_tests_build() is modified to be a no-op because it is not needed anymore. Its usage should be removed from all the other repos, and then removed from qtbase. Non-adjusted tests/CMakeLists.txt projects in other repositories should still be buildable with the current code, until they are updated to the new format. Adjust the Coin build instructions to build the standalone tests in a separate directory. Adjust pro2cmake to generate new structure for the tests/tests.pro projects. Adjust the qtbase tests project. Fixes: QTBUG-79239 Change-Id: Ib4b66bc772d8876cdcbae1e90ce5a5a5234fa675 Reviewed-by: Qt CMake Build Bot Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
2019-11-01 10:48:23 +00:00
# Decide whether tools will be built.
qt_check_if_tools_will_be_built()
CMake: Provide script to configure and build one or more tests Before this patch there were a few ways to build tests - Configure all tests as part of the repo build - Configure all tests as part of the repo build, but don't build tests by default (-DQT_NO_MAKE_TESTS=ON) - Configure all tests as a standalone project in a separate build dir using -QT_BUILD_STANDALONE_TESTS=ON All of the above incur some time overhead due to the necessity of configuring all tests. Sometimes you just want to build ONE test (or a few). To facilitate that use case, a new shell script called bin/qt-cmake-standalone-test(.bat) can now be used to configure and build one or more tests. The script takes one single argument pointing to the desired test project path and configures a generic template project that sets up all the necessary Qt CMake private API, afterwards calling add_subdirectory on the passed in project. Example $ path/to/qt/bin/qt-cmake-standalone-test ./tests/auto/gui/image/qicon or $ path/to/qt/bin/qt-cmake-standalone-test ./tests/auto/gui/image After that, simply run 'ninja && ctest' to build and run the test(s). This is the CMake equivalent of calling qmake on a test .pro file (or on a tests SUBDIRS .pro file) There are 3 details worth mentioning. Due to the add_subdirectory call, the built artifacts will not be in the top-level build dir, but rather in a nested build_dir. The script currently can't handle more than one argument (the path to the project), so you can't pass additional -DFoo=bar arguments. If a test uses a 3rd party library (like Threads::Threads) which was not a public dependency for any of the Qt modules, configuration will fail saying that the target was not found. Perhaps we should consider recording these packages when generating the StandaloneConfig.cmake files. Change-Id: Icde6ecb839341d34f341d9a19402c91196ed5aa0 Reviewed-by: Leander Beernaert <leander.beernaert@qt.io> Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
2020-03-18 18:09:00 +00:00
endmacro()
CMake: Adjust PCH support for multi-arch iOS builds Starting with CMake 3.18, there is PCH support for darwin multi-arch builds, like iOS simulator_and_device builds. Also enable PCH for Objective-C++ files when the support is there. To enable PCH for Objective-C++, we need to do enable the OBJCXX language as well, but conditionally, because on non-darwin platforms the language is probably not available. Introduce the qt_enable_cmake_languages() macro which is called automatically by qt_build_repo_begin(). Change-Id: I0e7f44be6577ac54ce940470036626409920e272 Reviewed-by: Leander Beernaert <leander.beernaert@qt.io> Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
2020-04-03 12:23:18 +00:00
macro(qt_enable_cmake_languages)
include(CheckLanguage)
set(__qt_required_language_list C CXX)
CMake: Autodetect Objective-C support only on macOS On Android, check_language() reports that the languages are supported, but enable_language fails afterwards. On Linux it causes issues with the PCH. The PCH file might contain a Clang pragma, even though the C++ compiler is GCC. Presumably due to finding a Clang Objective-C compiler. Change-Id: I1b4c54459772c089e7f6350872c87af52ad72a37 Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
2020-04-06 13:52:48 +00:00
set(__qt_optional_language_list )
# https://gitlab.kitware.com/cmake/cmake/-/issues/20545
if(APPLE)
list(APPEND __qt_optional_language_list OBJC OBJCXX)
endif()
CMake: Adjust PCH support for multi-arch iOS builds Starting with CMake 3.18, there is PCH support for darwin multi-arch builds, like iOS simulator_and_device builds. Also enable PCH for Objective-C++ files when the support is there. To enable PCH for Objective-C++, we need to do enable the OBJCXX language as well, but conditionally, because on non-darwin platforms the language is probably not available. Introduce the qt_enable_cmake_languages() macro which is called automatically by qt_build_repo_begin(). Change-Id: I0e7f44be6577ac54ce940470036626409920e272 Reviewed-by: Leander Beernaert <leander.beernaert@qt.io> Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
2020-04-03 12:23:18 +00:00
foreach(__qt_lang ${__qt_required_language_list})
enable_language(${__qt_lang})
endforeach()
foreach(__qt_lang ${__qt_optional_language_list})
check_language(${__qt_lang})
if(CMAKE_${__qt_lang}_COMPILER)
enable_language(${__qt_lang})
endif()
endforeach()
endmacro()
CMake: Provide script to configure and build one or more tests Before this patch there were a few ways to build tests - Configure all tests as part of the repo build - Configure all tests as part of the repo build, but don't build tests by default (-DQT_NO_MAKE_TESTS=ON) - Configure all tests as a standalone project in a separate build dir using -QT_BUILD_STANDALONE_TESTS=ON All of the above incur some time overhead due to the necessity of configuring all tests. Sometimes you just want to build ONE test (or a few). To facilitate that use case, a new shell script called bin/qt-cmake-standalone-test(.bat) can now be used to configure and build one or more tests. The script takes one single argument pointing to the desired test project path and configures a generic template project that sets up all the necessary Qt CMake private API, afterwards calling add_subdirectory on the passed in project. Example $ path/to/qt/bin/qt-cmake-standalone-test ./tests/auto/gui/image/qicon or $ path/to/qt/bin/qt-cmake-standalone-test ./tests/auto/gui/image After that, simply run 'ninja && ctest' to build and run the test(s). This is the CMake equivalent of calling qmake on a test .pro file (or on a tests SUBDIRS .pro file) There are 3 details worth mentioning. Due to the add_subdirectory call, the built artifacts will not be in the top-level build dir, but rather in a nested build_dir. The script currently can't handle more than one argument (the path to the project), so you can't pass additional -DFoo=bar arguments. If a test uses a 3rd party library (like Threads::Threads) which was not a public dependency for any of the Qt modules, configuration will fail saying that the target was not found. Perhaps we should consider recording these packages when generating the StandaloneConfig.cmake files. Change-Id: Icde6ecb839341d34f341d9a19402c91196ed5aa0 Reviewed-by: Leander Beernaert <leander.beernaert@qt.io> Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
2020-03-18 18:09:00 +00:00
macro(qt_build_repo_begin)
qt_build_internals_set_up_private_api()
CMake: Adjust PCH support for multi-arch iOS builds Starting with CMake 3.18, there is PCH support for darwin multi-arch builds, like iOS simulator_and_device builds. Also enable PCH for Objective-C++ files when the support is there. To enable PCH for Objective-C++, we need to do enable the OBJCXX language as well, but conditionally, because on non-darwin platforms the language is probably not available. Introduce the qt_enable_cmake_languages() macro which is called automatically by qt_build_repo_begin(). Change-Id: I0e7f44be6577ac54ce940470036626409920e272 Reviewed-by: Leander Beernaert <leander.beernaert@qt.io> Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
2020-04-03 12:23:18 +00:00
qt_enable_cmake_languages()
Add custom targets for documentation Adds custom targets which take care of generating and installing documentation files. Every module has a global set of targets suffixed with the module name in order for them to be unique when we implement super builds. The targets are the same as the list below, but replace ${target} with the module's name. Eg.: docs_qtbase. For every target which has an qt_add_docs() call, we now create the following set of custom targets: * docs_${target} * html_docs_${target} * qch_docs_${target} * prepare_docs_${target} * generate_docs_${target} * install_docs_${target} * install_html_docs_${target} * install_qch_docs_${target} Fixes: QTBUG-75859 Change-Id: Ie84cb9a2dedbe7333d9a84f4d73383442deca477 Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
2019-09-19 07:38:09 +00:00
CMake: Add global / top-level docs targets Previously you could use either module-specific or repo-specific 'docs' targets. For example 'ninja html_docs_qtbase' or 'ninja html_docs_Core'. Now there's a global / top-level target called 'docs', so 'ninja docs' works. For super builds it will build the documentation of all configured repositories. For a single repo build, it's equivalent to calling 'ninja docs_repo_name'. Also for consistency, add the "docs_Core" target, which was missing before. So now a 'docs' target exsits for repo names AND targets. New global target names are - docs - prepare_docs - generate_docs - html_docs - qch_docs - install_html_docs_docs - install_qch_docs_docs - install_docs_docs Amends 0095ff4e0659906595d281b37c3b7f89e37250af Change-Id: I686be1e0962e40cbce860e8ac2cabb056b360ac2 Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
2020-03-18 15:07:44 +00:00
# Add global docs targets that will work both for per-repo builds, and super builds.
if(NOT TARGET docs)
add_custom_target(docs)
add_custom_target(prepare_docs)
add_custom_target(generate_docs)
add_custom_target(html_docs)
add_custom_target(qch_docs)
add_custom_target(install_html_docs_docs)
add_custom_target(install_qch_docs_docs)
add_custom_target(install_docs_docs)
endif()
Add custom targets for documentation Adds custom targets which take care of generating and installing documentation files. Every module has a global set of targets suffixed with the module name in order for them to be unique when we implement super builds. The targets are the same as the list below, but replace ${target} with the module's name. Eg.: docs_qtbase. For every target which has an qt_add_docs() call, we now create the following set of custom targets: * docs_${target} * html_docs_${target} * qch_docs_${target} * prepare_docs_${target} * generate_docs_${target} * install_docs_${target} * install_html_docs_${target} * install_qch_docs_${target} Fixes: QTBUG-75859 Change-Id: Ie84cb9a2dedbe7333d9a84f4d73383442deca477 Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
2019-09-19 07:38:09 +00:00
string(TOLOWER ${PROJECT_NAME} project_name_lower)
set(qt_docs_target_name docs_${project_name_lower})
set(qt_docs_prepare_target_name prepare_docs_${project_name_lower})
set(qt_docs_generate_target_name generate_docs_${project_name_lower})
set(qt_docs_html_target_name html_docs_${project_name_lower})
set(qt_docs_qch_target_name qch_docs_${project_name_lower})
set(qt_docs_install_html_target_name install_html_docs_${project_name_lower})
set(qt_docs_install_qch_target_name install_qch_docs_${project_name_lower})
set(qt_docs_install_target_name install_docs_${project_name_lower})
add_custom_target(${qt_docs_target_name})
add_custom_target(${qt_docs_prepare_target_name})
add_custom_target(${qt_docs_generate_target_name})
add_custom_target(${qt_docs_qch_target_name})
add_custom_target(${qt_docs_html_target_name})
add_custom_target(${qt_docs_install_html_target_name})
add_custom_target(${qt_docs_install_qch_target_name})
add_custom_target(${qt_docs_install_target_name})
add_dependencies(${qt_docs_generate_target_name} ${qt_docs_prepare_target_name})
add_dependencies(${qt_docs_html_target_name} ${qt_docs_generate_target_name})
add_dependencies(${qt_docs_install_html_target_name} ${qt_docs_html_target_name})
add_dependencies(${qt_docs_install_qch_target_name} ${qt_docs_qch_target_name})
add_dependencies(${qt_docs_install_target_name} ${qt_docs_install_html_target_name} ${qt_docs_install_qch_target_name})
CMake: Add global / top-level docs targets Previously you could use either module-specific or repo-specific 'docs' targets. For example 'ninja html_docs_qtbase' or 'ninja html_docs_Core'. Now there's a global / top-level target called 'docs', so 'ninja docs' works. For super builds it will build the documentation of all configured repositories. For a single repo build, it's equivalent to calling 'ninja docs_repo_name'. Also for consistency, add the "docs_Core" target, which was missing before. So now a 'docs' target exsits for repo names AND targets. New global target names are - docs - prepare_docs - generate_docs - html_docs - qch_docs - install_html_docs_docs - install_qch_docs_docs - install_docs_docs Amends 0095ff4e0659906595d281b37c3b7f89e37250af Change-Id: I686be1e0962e40cbce860e8ac2cabb056b360ac2 Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
2020-03-18 15:07:44 +00:00
# Make global doc targets depend on the module ones.
add_dependencies(docs ${qt_docs_target_name})
add_dependencies(prepare_docs ${qt_docs_prepare_target_name})
add_dependencies(generate_docs ${qt_docs_generate_target_name})
add_dependencies(html_docs ${qt_docs_qch_target_name})
add_dependencies(qch_docs ${qt_docs_html_target_name})
add_dependencies(install_html_docs_docs ${qt_docs_install_html_target_name})
add_dependencies(install_qch_docs_docs ${qt_docs_install_qch_target_name})
add_dependencies(install_docs_docs ${qt_docs_install_target_name})
Use the qt_build_repo() macros for building qtbase as well To implement this, create a new Qt5BuildInternals package. All child Qt modules like qtsvg should use find_package(Qt5BuildInternals) or find_package(Qt5 COMPONENTS BuildInternals) in the their top level CMakeLists.txt. This will make the qt_build_repo() macros available. For qtbase we slightly cheat, and specify a CMAKE_PREFIX_PATH pointing to the source folder that contains the BuildInternals package. For the other modules we actually use a configured and installed package Config file. This change moves variables that used to be written into the QtCore Config file into the BuildInternals package. This way things that are relevant only for building additional Qt modules does not pollute the QtCore package. Task-number: QTBUG-75580 Change-Id: I5479adff2f7903c9c2862d28c05c7f485ce3e4eb Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
2019-05-15 11:57:15 +00:00
endmacro()
macro(qt_build_repo_end)
Make standalone tests build via top level repo project Previously repo/tests/CMakeLists.txt was a standalone project on which CMake could be called. This was useful for Coin to be able to build and package only tests, but was a bit troublesome because that means having to specify the usual boilerplate like minimum CMake version, which packages to find in every tests.pro project. Instead of having a separate standalone project, modify the top level project and associated CMake code to allow passing a special QT_BUILD_STANDALONE_TESTS variable, which causes the top level project to build only tests, and find Qt in the previously installed qt location. This also means that when building a repo, we generate a ${repo_name}TestsConfig.cmake file which does find_package on all the modules that have been built as part of that repo. So that when standalone tests bare built for that repo, the modules are automatically found. qt_set_up_standalone_tests_build() is modified to be a no-op because it is not needed anymore. Its usage should be removed from all the other repos, and then removed from qtbase. Non-adjusted tests/CMakeLists.txt projects in other repositories should still be buildable with the current code, until they are updated to the new format. Adjust the Coin build instructions to build the standalone tests in a separate directory. Adjust pro2cmake to generate new structure for the tests/tests.pro projects. Adjust the qtbase tests project. Fixes: QTBUG-79239 Change-Id: Ib4b66bc772d8876cdcbae1e90ce5a5a5234fa675 Reviewed-by: Qt CMake Build Bot Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
2019-11-01 10:48:23 +00:00
if(NOT QT_BUILD_STANDALONE_TESTS)
# Delayed actions on some of the Qt targets:
include(QtPostProcess)
# Install the repo-specific cmake find modules.
qt_path_join(__qt_repo_install_dir ${QT_CONFIG_INSTALL_DIR} ${INSTALL_CMAKE_NAMESPACE})
if(NOT PROJECT_NAME STREQUAL "QtBase")
if (EXISTS cmake)
qt_copy_or_install(DIRECTORY cmake/
DESTINATION "${__qt_repo_install_dir}"
FILES_MATCHING PATTERN "Find*.cmake"
)
endif()
cmake/ does not necessarily exist in a module E.g. qtsvg does not have a cmake/ folder Change-Id: I216776a4997709222064aa76195a32e7bdb6b080 Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
2019-06-05 14:26:42 +00:00
endif()
Automatically install repo specific cmake find modules Some qt modules need to find 3rd party packages for which there are no Config files. We need to write custom CMake Find modules to find those packages. These find modules need to be installed so that they are used when a user consumes the Qt packages. Automatically include and install these find modules if they exist, as part of qt_build_repo_end(). Change-Id: I14aad35ed2999cac8bdda65ca4aeaf74d04fdb71 Reviewed-by: Tobias Hunger <tobias.hunger@qt.io> Reviewed-by: Liang Qi <liang.qi@qt.io>
2019-05-20 07:46:38 +00:00
Implement qtbase fixes for superbuilds Change-Id: I0d3445cf0740e3925fa9342dac4d07892518afe5 Reviewed-by: Qt CMake Build Bot Reviewed-by: Cristian Adam <cristian.adam@qt.io>
2019-11-21 12:33:28 +00:00
if(NOT QT_SUPERBUILD)
qt_print_feature_summary()
endif()
Print build instructions when configuring qtbase This is similar to how we show the instructions when configuring in qmake land. Change-Id: Iabd28acc3d74fd0175eab812a412744dac89e6f6 Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
2019-09-17 14:05:50 +00:00
endif()
Implement qtbase fixes for superbuilds Change-Id: I0d3445cf0740e3925fa9342dac4d07892518afe5 Reviewed-by: Qt CMake Build Bot Reviewed-by: Cristian Adam <cristian.adam@qt.io>
2019-11-21 12:33:28 +00:00
if(NOT QT_SUPERBUILD)
qt_print_build_instructions()
Print build instructions when configuring qtbase This is similar to how we show the instructions when configuring in qmake land. Change-Id: Iabd28acc3d74fd0175eab812a412744dac89e6f6 Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
2019-09-17 14:05:50 +00:00
endif()
Implement qtbase fixes for superbuilds Change-Id: I0d3445cf0740e3925fa9342dac4d07892518afe5 Reviewed-by: Qt CMake Build Bot Reviewed-by: Cristian Adam <cristian.adam@qt.io>
2019-11-21 12:33:28 +00:00
endmacro()
Print build instructions when configuring qtbase This is similar to how we show the instructions when configuring in qmake land. Change-Id: Iabd28acc3d74fd0175eab812a412744dac89e6f6 Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
2019-09-17 14:05:50 +00:00
Simplify top-level CMakeLists.txt for modules Implement some aspects of qt_parts.prf to simplify the top-level CMakeLists.txt for repositories that follow the common qt structure (src, tools, tests, examples). Change-Id: Ia35f4e9207e92c1cf0406353561b0cc52dcb0e59 Reviewed-by: Liang Qi <liang.qi@qt.io> Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
2019-05-21 07:04:27 +00:00
macro(qt_build_repo)
qt_build_repo_begin(${ARGN})
Try to find Test package before calling add_subdirectory(src) in qt_build_repo(). This is important for qtdeclarative for example, which builds QmlTest functionality in ./src, and thus needs Test lib to be available. Change-Id: I84326d79844526f2f177c19de30bab0c858773e3 Reviewed-by: Qt CMake Build Bot Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
2019-06-13 13:35:26 +00:00
# If testing is enabled, try to find the qtbase Test package.
# Do this before adding src, because there might be test related conditions
# in source.
Make standalone tests build via top level repo project Previously repo/tests/CMakeLists.txt was a standalone project on which CMake could be called. This was useful for Coin to be able to build and package only tests, but was a bit troublesome because that means having to specify the usual boilerplate like minimum CMake version, which packages to find in every tests.pro project. Instead of having a separate standalone project, modify the top level project and associated CMake code to allow passing a special QT_BUILD_STANDALONE_TESTS variable, which causes the top level project to build only tests, and find Qt in the previously installed qt location. This also means that when building a repo, we generate a ${repo_name}TestsConfig.cmake file which does find_package on all the modules that have been built as part of that repo. So that when standalone tests bare built for that repo, the modules are automatically found. qt_set_up_standalone_tests_build() is modified to be a no-op because it is not needed anymore. Its usage should be removed from all the other repos, and then removed from qtbase. Non-adjusted tests/CMakeLists.txt projects in other repositories should still be buildable with the current code, until they are updated to the new format. Adjust the Coin build instructions to build the standalone tests in a separate directory. Adjust pro2cmake to generate new structure for the tests/tests.pro projects. Adjust the qtbase tests project. Fixes: QTBUG-79239 Change-Id: Ib4b66bc772d8876cdcbae1e90ce5a5a5234fa675 Reviewed-by: Qt CMake Build Bot Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
2019-11-01 10:48:23 +00:00
if (BUILD_TESTING AND NOT QT_BUILD_STANDALONE_TESTS)
Merge remote-tracking branch 'origin/wip/qt6' into wip/cmake This changes many different CMake places to mention Qt6 instead of Qt5. Note that some old qt5 cmake config files in corelib are probably not needed anymore, but I still renamed and kept them for now. Change-Id: Ie69e81540386a5af153f76c0242e18d48211bec4
2019-06-14 10:59:07 +00:00
find_package(Qt6 ${PROJECT_VERSION} CONFIG REQUIRED COMPONENTS Test)
Try to find Test package before calling add_subdirectory(src) in qt_build_repo(). This is important for qtdeclarative for example, which builds QmlTest functionality in ./src, and thus needs Test lib to be available. Change-Id: I84326d79844526f2f177c19de30bab0c858773e3 Reviewed-by: Qt CMake Build Bot Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
2019-06-13 13:35:26 +00:00
endif()
Make standalone tests build via top level repo project Previously repo/tests/CMakeLists.txt was a standalone project on which CMake could be called. This was useful for Coin to be able to build and package only tests, but was a bit troublesome because that means having to specify the usual boilerplate like minimum CMake version, which packages to find in every tests.pro project. Instead of having a separate standalone project, modify the top level project and associated CMake code to allow passing a special QT_BUILD_STANDALONE_TESTS variable, which causes the top level project to build only tests, and find Qt in the previously installed qt location. This also means that when building a repo, we generate a ${repo_name}TestsConfig.cmake file which does find_package on all the modules that have been built as part of that repo. So that when standalone tests bare built for that repo, the modules are automatically found. qt_set_up_standalone_tests_build() is modified to be a no-op because it is not needed anymore. Its usage should be removed from all the other repos, and then removed from qtbase. Non-adjusted tests/CMakeLists.txt projects in other repositories should still be buildable with the current code, until they are updated to the new format. Adjust the Coin build instructions to build the standalone tests in a separate directory. Adjust pro2cmake to generate new structure for the tests/tests.pro projects. Adjust the qtbase tests project. Fixes: QTBUG-79239 Change-Id: Ib4b66bc772d8876cdcbae1e90ce5a5a5234fa675 Reviewed-by: Qt CMake Build Bot Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
2019-11-01 10:48:23 +00:00
if(NOT QT_BUILD_STANDALONE_TESTS)
if (EXISTS "${CMAKE_CURRENT_SOURCE_DIR}/src/CMakeLists.txt")
add_subdirectory(src)
endif()
Simplify top-level CMakeLists.txt for modules Implement some aspects of qt_parts.prf to simplify the top-level CMakeLists.txt for repositories that follow the common qt structure (src, tools, tests, examples). Change-Id: Ia35f4e9207e92c1cf0406353561b0cc52dcb0e59 Reviewed-by: Liang Qi <liang.qi@qt.io> Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
2019-05-21 07:04:27 +00:00
Make standalone tests build via top level repo project Previously repo/tests/CMakeLists.txt was a standalone project on which CMake could be called. This was useful for Coin to be able to build and package only tests, but was a bit troublesome because that means having to specify the usual boilerplate like minimum CMake version, which packages to find in every tests.pro project. Instead of having a separate standalone project, modify the top level project and associated CMake code to allow passing a special QT_BUILD_STANDALONE_TESTS variable, which causes the top level project to build only tests, and find Qt in the previously installed qt location. This also means that when building a repo, we generate a ${repo_name}TestsConfig.cmake file which does find_package on all the modules that have been built as part of that repo. So that when standalone tests bare built for that repo, the modules are automatically found. qt_set_up_standalone_tests_build() is modified to be a no-op because it is not needed anymore. Its usage should be removed from all the other repos, and then removed from qtbase. Non-adjusted tests/CMakeLists.txt projects in other repositories should still be buildable with the current code, until they are updated to the new format. Adjust the Coin build instructions to build the standalone tests in a separate directory. Adjust pro2cmake to generate new structure for the tests/tests.pro projects. Adjust the qtbase tests project. Fixes: QTBUG-79239 Change-Id: Ib4b66bc772d8876cdcbae1e90ce5a5a5234fa675 Reviewed-by: Qt CMake Build Bot Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
2019-11-01 10:48:23 +00:00
if (EXISTS "${CMAKE_CURRENT_SOURCE_DIR}/tools/CMakeLists.txt")
add_subdirectory(tools)
endif()
Change qt_build_repo to build tools if present and needed This is needed for qtdeclarative, to automatically start building the tools if needed. Change-Id: I3cbe129e8bb6fa8572a8e34fd3653b51727cb244 Reviewed-by: Qt CMake Build Bot Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
2019-06-05 14:10:59 +00:00
endif()
Fix qt_build_repo to be more robust Check for the existence of CMakeLists.txt files before trying to call add_subdirectory on examples, tests and src folders. Change-Id: I7be76de5f7520c1dd181c610fd1dc2200ac74672 Reviewed-by: Simon Hausmann <simon.hausmann@qt.io> Reviewed-by: Qt CMake Build Bot
2019-05-24 17:18:21 +00:00
if (BUILD_TESTING AND EXISTS "${CMAKE_CURRENT_SOURCE_DIR}/tests/CMakeLists.txt")
Simplify top-level CMakeLists.txt for modules Implement some aspects of qt_parts.prf to simplify the top-level CMakeLists.txt for repositories that follow the common qt structure (src, tools, tests, examples). Change-Id: Ia35f4e9207e92c1cf0406353561b0cc52dcb0e59 Reviewed-by: Liang Qi <liang.qi@qt.io> Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
2019-05-21 07:04:27 +00:00
add_subdirectory(tests)
Add support for -nomake-tests and -nomake-examples equivalents A developer can pass either -DQT_NO_MAKE_TESTS=ON or -DQT_NO_MAKE_EXAMPLES=ON to exclude tests or examples from being built as part the default make target (when you write just make or ninja). With ninja, tests and examples can be built separately one by one, by typing $ ninja tst_foo or $ ninja example_bar Same can be done with the Makefile generator. $ make tst_foo All tests / examples can be built in one go by typing $ ninja tests/all or $ ninja examples/all With the Makefile generator unfortunately it's not as nice and is most likely an implementation detail, but it can still be done by running something like $ make -f CMakeFiles/Makefile2 tests/all or $ make -f CMakeFiles/Makefile2 examples/all Change-Id: I34f168b3ab41e952a21d3ace5634e25a9f41922e Reviewed-by: Qt CMake Build Bot Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
2019-11-04 13:43:39 +00:00
if(QT_NO_MAKE_TESTS)
set_property(DIRECTORY tests PROPERTY EXCLUDE_FROM_ALL TRUE)
endif()
Simplify top-level CMakeLists.txt for modules Implement some aspects of qt_parts.prf to simplify the top-level CMakeLists.txt for repositories that follow the common qt structure (src, tools, tests, examples). Change-Id: Ia35f4e9207e92c1cf0406353561b0cc52dcb0e59 Reviewed-by: Liang Qi <liang.qi@qt.io> Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
2019-05-21 07:04:27 +00:00
endif()
Fix linking of examples Provide add_qt_gui_executable() as function in our public API that takes care of automaticWinMain linkage. We can use this in the future to encapsulate similarplatform-specific behavior and adjustments, such as module generation onAndroid. In order for the examples to see the function in Qt5CoreMacros, three more additional fixes were required: * Do the build_repo_end() call _before_ attempting to build the examples, as we need the build_repo_end() to include QtPostProcess and complete the creation of all the target config files. Otherwise the find_package() calls in the examples see something incomplete. * Add more QT_NO_CREATE_TARGET guards * Always call find_dependency on the dependencies, regardless of the target creation mode. This way a find_package(Qt5 COMPONENTS Widgets) will still load Qt5CoreMacros. Change-Id: I03ce856e2f4312a050fe8043b8331cbe8a6c93e6 Reviewed-by: Qt CMake Build Bot Reviewed-by: Leander Beernaert <leander.beernaert@qt.io> Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
2019-06-11 13:46:31 +00:00
qt_build_repo_end()
Make standalone tests build via top level repo project Previously repo/tests/CMakeLists.txt was a standalone project on which CMake could be called. This was useful for Coin to be able to build and package only tests, but was a bit troublesome because that means having to specify the usual boilerplate like minimum CMake version, which packages to find in every tests.pro project. Instead of having a separate standalone project, modify the top level project and associated CMake code to allow passing a special QT_BUILD_STANDALONE_TESTS variable, which causes the top level project to build only tests, and find Qt in the previously installed qt location. This also means that when building a repo, we generate a ${repo_name}TestsConfig.cmake file which does find_package on all the modules that have been built as part of that repo. So that when standalone tests bare built for that repo, the modules are automatically found. qt_set_up_standalone_tests_build() is modified to be a no-op because it is not needed anymore. Its usage should be removed from all the other repos, and then removed from qtbase. Non-adjusted tests/CMakeLists.txt projects in other repositories should still be buildable with the current code, until they are updated to the new format. Adjust the Coin build instructions to build the standalone tests in a separate directory. Adjust pro2cmake to generate new structure for the tests/tests.pro projects. Adjust the qtbase tests project. Fixes: QTBUG-79239 Change-Id: Ib4b66bc772d8876cdcbae1e90ce5a5a5234fa675 Reviewed-by: Qt CMake Build Bot Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
2019-11-01 10:48:23 +00:00
if (BUILD_EXAMPLES AND BUILD_SHARED_LIBS
AND EXISTS "${CMAKE_CURRENT_SOURCE_DIR}/examples/CMakeLists.txt"
AND NOT QT_BUILD_STANDALONE_TESTS)
Fix qt_build_repo to be more robust Check for the existence of CMakeLists.txt files before trying to call add_subdirectory on examples, tests and src folders. Change-Id: I7be76de5f7520c1dd181c610fd1dc2200ac74672 Reviewed-by: Simon Hausmann <simon.hausmann@qt.io> Reviewed-by: Qt CMake Build Bot
2019-05-24 17:18:21 +00:00
add_subdirectory(examples)
Add support for -nomake-tests and -nomake-examples equivalents A developer can pass either -DQT_NO_MAKE_TESTS=ON or -DQT_NO_MAKE_EXAMPLES=ON to exclude tests or examples from being built as part the default make target (when you write just make or ninja). With ninja, tests and examples can be built separately one by one, by typing $ ninja tst_foo or $ ninja example_bar Same can be done with the Makefile generator. $ make tst_foo All tests / examples can be built in one go by typing $ ninja tests/all or $ ninja examples/all With the Makefile generator unfortunately it's not as nice and is most likely an implementation detail, but it can still be done by running something like $ make -f CMakeFiles/Makefile2 tests/all or $ make -f CMakeFiles/Makefile2 examples/all Change-Id: I34f168b3ab41e952a21d3ace5634e25a9f41922e Reviewed-by: Qt CMake Build Bot Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
2019-11-04 13:43:39 +00:00
if(QT_NO_MAKE_EXAMPLES)
set_property(DIRECTORY examples PROPERTY EXCLUDE_FROM_ALL TRUE)
endif()
Simplify top-level CMakeLists.txt for modules Implement some aspects of qt_parts.prf to simplify the top-level CMakeLists.txt for repositories that follow the common qt structure (src, tools, tests, examples). Change-Id: Ia35f4e9207e92c1cf0406353561b0cc52dcb0e59 Reviewed-by: Liang Qi <liang.qi@qt.io> Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
2019-05-21 07:04:27 +00:00
endif()
endmacro()
Allow building the tests directory as a standalone CMake project At the moment, Coin builds tests as a separate qmake invocation against an installed Qt. We need to support the same with CMake. Change the tests subdirectory to be a standalone CMake project when CMake does not detect an existing QtTest target while processing the subdirectory. If the target exists, it means we are building the whole repo, if the target does not exist, we need to call find_package to find the installed Qt. Refactor and move around a few things to make standalone tests build successfully: - add a new macro to set up paths to find QtSetup - add a new macro to find all macOS frameworks - add a new macro to set up building tests - add a new macro that actually builds the tests - export the INSTALL_CMAKE_NAMESPACE value into the BuildInternals Config file - export the CMAKE_BUILD_TYPE value, because a test project doesn't have a .git subdir and thus defaults to be built in Release mode, even though qtbase might have been built in Debug, so to avoid the mixing, the propagate the build type - stop overriding INSTALL_CMAKE_NAMESPACE and QT_CMAKE_EXPORT_NAMESPACE inside QtSetup if they are set, because the tests project doesn't specify a major version, and if we override the values, the moc / uic targets don't get the correct major version prefix and configuration fails Change-Id: Ibdb03687302567fe325a15f6d1cb922c76240675 Fixes: QTBUG-75090 Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
2019-05-22 08:22:08 +00:00
macro(qt_set_up_standalone_tests_build)
Make standalone tests build via top level repo project Previously repo/tests/CMakeLists.txt was a standalone project on which CMake could be called. This was useful for Coin to be able to build and package only tests, but was a bit troublesome because that means having to specify the usual boilerplate like minimum CMake version, which packages to find in every tests.pro project. Instead of having a separate standalone project, modify the top level project and associated CMake code to allow passing a special QT_BUILD_STANDALONE_TESTS variable, which causes the top level project to build only tests, and find Qt in the previously installed qt location. This also means that when building a repo, we generate a ${repo_name}TestsConfig.cmake file which does find_package on all the modules that have been built as part of that repo. So that when standalone tests bare built for that repo, the modules are automatically found. qt_set_up_standalone_tests_build() is modified to be a no-op because it is not needed anymore. Its usage should be removed from all the other repos, and then removed from qtbase. Non-adjusted tests/CMakeLists.txt projects in other repositories should still be buildable with the current code, until they are updated to the new format. Adjust the Coin build instructions to build the standalone tests in a separate directory. Adjust pro2cmake to generate new structure for the tests/tests.pro projects. Adjust the qtbase tests project. Fixes: QTBUG-79239 Change-Id: Ib4b66bc772d8876cdcbae1e90ce5a5a5234fa675 Reviewed-by: Qt CMake Build Bot Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
2019-11-01 10:48:23 +00:00
# Remove this macro once all usages of it have been removed.
# Standalone tests are not handled via the main repo project and qt_build_tests.
Allow building the tests directory as a standalone CMake project At the moment, Coin builds tests as a separate qmake invocation against an installed Qt. We need to support the same with CMake. Change the tests subdirectory to be a standalone CMake project when CMake does not detect an existing QtTest target while processing the subdirectory. If the target exists, it means we are building the whole repo, if the target does not exist, we need to call find_package to find the installed Qt. Refactor and move around a few things to make standalone tests build successfully: - add a new macro to set up paths to find QtSetup - add a new macro to find all macOS frameworks - add a new macro to set up building tests - add a new macro that actually builds the tests - export the INSTALL_CMAKE_NAMESPACE value into the BuildInternals Config file - export the CMAKE_BUILD_TYPE value, because a test project doesn't have a .git subdir and thus defaults to be built in Release mode, even though qtbase might have been built in Debug, so to avoid the mixing, the propagate the build type - stop overriding INSTALL_CMAKE_NAMESPACE and QT_CMAKE_EXPORT_NAMESPACE inside QtSetup if they are set, because the tests project doesn't specify a major version, and if we override the values, the moc / uic targets don't get the correct major version prefix and configuration fails Change-Id: Ibdb03687302567fe325a15f6d1cb922c76240675 Fixes: QTBUG-75090 Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
2019-05-22 08:22:08 +00:00
endmacro()
CMake: Provide script to configure and build one or more tests Before this patch there were a few ways to build tests - Configure all tests as part of the repo build - Configure all tests as part of the repo build, but don't build tests by default (-DQT_NO_MAKE_TESTS=ON) - Configure all tests as a standalone project in a separate build dir using -QT_BUILD_STANDALONE_TESTS=ON All of the above incur some time overhead due to the necessity of configuring all tests. Sometimes you just want to build ONE test (or a few). To facilitate that use case, a new shell script called bin/qt-cmake-standalone-test(.bat) can now be used to configure and build one or more tests. The script takes one single argument pointing to the desired test project path and configures a generic template project that sets up all the necessary Qt CMake private API, afterwards calling add_subdirectory on the passed in project. Example $ path/to/qt/bin/qt-cmake-standalone-test ./tests/auto/gui/image/qicon or $ path/to/qt/bin/qt-cmake-standalone-test ./tests/auto/gui/image After that, simply run 'ninja && ctest' to build and run the test(s). This is the CMake equivalent of calling qmake on a test .pro file (or on a tests SUBDIRS .pro file) There are 3 details worth mentioning. Due to the add_subdirectory call, the built artifacts will not be in the top-level build dir, but rather in a nested build_dir. The script currently can't handle more than one argument (the path to the project), so you can't pass additional -DFoo=bar arguments. If a test uses a 3rd party library (like Threads::Threads) which was not a public dependency for any of the Qt modules, configuration will fail saying that the target was not found. Perhaps we should consider recording these packages when generating the StandaloneConfig.cmake files. Change-Id: Icde6ecb839341d34f341d9a19402c91196ed5aa0 Reviewed-by: Leander Beernaert <leander.beernaert@qt.io> Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
2020-03-18 18:09:00 +00:00
function(qt_get_standalone_tests_confg_files_path out_var)
set(path "${QT_CONFIG_INSTALL_DIR}/${INSTALL_CMAKE_NAMESPACE}BuildInternals/StandaloneTests")
set("${out_var}" "${path}" PARENT_SCOPE)
endfunction()
Allow building the tests directory as a standalone CMake project At the moment, Coin builds tests as a separate qmake invocation against an installed Qt. We need to support the same with CMake. Change the tests subdirectory to be a standalone CMake project when CMake does not detect an existing QtTest target while processing the subdirectory. If the target exists, it means we are building the whole repo, if the target does not exist, we need to call find_package to find the installed Qt. Refactor and move around a few things to make standalone tests build successfully: - add a new macro to set up paths to find QtSetup - add a new macro to find all macOS frameworks - add a new macro to set up building tests - add a new macro that actually builds the tests - export the INSTALL_CMAKE_NAMESPACE value into the BuildInternals Config file - export the CMAKE_BUILD_TYPE value, because a test project doesn't have a .git subdir and thus defaults to be built in Release mode, even though qtbase might have been built in Debug, so to avoid the mixing, the propagate the build type - stop overriding INSTALL_CMAKE_NAMESPACE and QT_CMAKE_EXPORT_NAMESPACE inside QtSetup if they are set, because the tests project doesn't specify a major version, and if we override the values, the moc / uic targets don't get the correct major version prefix and configuration fails Change-Id: Ibdb03687302567fe325a15f6d1cb922c76240675 Fixes: QTBUG-75090 Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
2019-05-22 08:22:08 +00:00
macro(qt_build_tests)
Make standalone tests build via top level repo project Previously repo/tests/CMakeLists.txt was a standalone project on which CMake could be called. This was useful for Coin to be able to build and package only tests, but was a bit troublesome because that means having to specify the usual boilerplate like minimum CMake version, which packages to find in every tests.pro project. Instead of having a separate standalone project, modify the top level project and associated CMake code to allow passing a special QT_BUILD_STANDALONE_TESTS variable, which causes the top level project to build only tests, and find Qt in the previously installed qt location. This also means that when building a repo, we generate a ${repo_name}TestsConfig.cmake file which does find_package on all the modules that have been built as part of that repo. So that when standalone tests bare built for that repo, the modules are automatically found. qt_set_up_standalone_tests_build() is modified to be a no-op because it is not needed anymore. Its usage should be removed from all the other repos, and then removed from qtbase. Non-adjusted tests/CMakeLists.txt projects in other repositories should still be buildable with the current code, until they are updated to the new format. Adjust the Coin build instructions to build the standalone tests in a separate directory. Adjust pro2cmake to generate new structure for the tests/tests.pro projects. Adjust the qtbase tests project. Fixes: QTBUG-79239 Change-Id: Ib4b66bc772d8876cdcbae1e90ce5a5a5234fa675 Reviewed-by: Qt CMake Build Bot Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
2019-11-01 10:48:23 +00:00
if(QT_BUILD_STANDALONE_TESTS)
# Find location of TestsConfig.cmake. These contain the modules that need to be
# find_package'd when testing.
CMake: Provide script to configure and build one or more tests Before this patch there were a few ways to build tests - Configure all tests as part of the repo build - Configure all tests as part of the repo build, but don't build tests by default (-DQT_NO_MAKE_TESTS=ON) - Configure all tests as a standalone project in a separate build dir using -QT_BUILD_STANDALONE_TESTS=ON All of the above incur some time overhead due to the necessity of configuring all tests. Sometimes you just want to build ONE test (or a few). To facilitate that use case, a new shell script called bin/qt-cmake-standalone-test(.bat) can now be used to configure and build one or more tests. The script takes one single argument pointing to the desired test project path and configures a generic template project that sets up all the necessary Qt CMake private API, afterwards calling add_subdirectory on the passed in project. Example $ path/to/qt/bin/qt-cmake-standalone-test ./tests/auto/gui/image/qicon or $ path/to/qt/bin/qt-cmake-standalone-test ./tests/auto/gui/image After that, simply run 'ninja && ctest' to build and run the test(s). This is the CMake equivalent of calling qmake on a test .pro file (or on a tests SUBDIRS .pro file) There are 3 details worth mentioning. Due to the add_subdirectory call, the built artifacts will not be in the top-level build dir, but rather in a nested build_dir. The script currently can't handle more than one argument (the path to the project), so you can't pass additional -DFoo=bar arguments. If a test uses a 3rd party library (like Threads::Threads) which was not a public dependency for any of the Qt modules, configuration will fail saying that the target was not found. Perhaps we should consider recording these packages when generating the StandaloneConfig.cmake files. Change-Id: Icde6ecb839341d34f341d9a19402c91196ed5aa0 Reviewed-by: Leander Beernaert <leander.beernaert@qt.io> Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
2020-03-18 18:09:00 +00:00
qt_get_standalone_tests_confg_files_path(_qt_build_tests_install_prefix)
Make standalone tests build via top level repo project Previously repo/tests/CMakeLists.txt was a standalone project on which CMake could be called. This was useful for Coin to be able to build and package only tests, but was a bit troublesome because that means having to specify the usual boilerplate like minimum CMake version, which packages to find in every tests.pro project. Instead of having a separate standalone project, modify the top level project and associated CMake code to allow passing a special QT_BUILD_STANDALONE_TESTS variable, which causes the top level project to build only tests, and find Qt in the previously installed qt location. This also means that when building a repo, we generate a ${repo_name}TestsConfig.cmake file which does find_package on all the modules that have been built as part of that repo. So that when standalone tests bare built for that repo, the modules are automatically found. qt_set_up_standalone_tests_build() is modified to be a no-op because it is not needed anymore. Its usage should be removed from all the other repos, and then removed from qtbase. Non-adjusted tests/CMakeLists.txt projects in other repositories should still be buildable with the current code, until they are updated to the new format. Adjust the Coin build instructions to build the standalone tests in a separate directory. Adjust pro2cmake to generate new structure for the tests/tests.pro projects. Adjust the qtbase tests project. Fixes: QTBUG-79239 Change-Id: Ib4b66bc772d8876cdcbae1e90ce5a5a5234fa675 Reviewed-by: Qt CMake Build Bot Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
2019-11-01 10:48:23 +00:00
if(QT_WILL_INSTALL)
qt_path_join(_qt_build_tests_install_prefix
${CMAKE_INSTALL_PREFIX} ${_qt_build_tests_install_prefix})
endif()
Implement qtbase fixes for superbuilds Change-Id: I0d3445cf0740e3925fa9342dac4d07892518afe5 Reviewed-by: Qt CMake Build Bot Reviewed-by: Cristian Adam <cristian.adam@qt.io>
2019-11-21 12:33:28 +00:00
include("${_qt_build_tests_install_prefix}/${PROJECT_NAME}TestsConfig.cmake" OPTIONAL)
Make standalone tests build via top level repo project Previously repo/tests/CMakeLists.txt was a standalone project on which CMake could be called. This was useful for Coin to be able to build and package only tests, but was a bit troublesome because that means having to specify the usual boilerplate like minimum CMake version, which packages to find in every tests.pro project. Instead of having a separate standalone project, modify the top level project and associated CMake code to allow passing a special QT_BUILD_STANDALONE_TESTS variable, which causes the top level project to build only tests, and find Qt in the previously installed qt location. This also means that when building a repo, we generate a ${repo_name}TestsConfig.cmake file which does find_package on all the modules that have been built as part of that repo. So that when standalone tests bare built for that repo, the modules are automatically found. qt_set_up_standalone_tests_build() is modified to be a no-op because it is not needed anymore. Its usage should be removed from all the other repos, and then removed from qtbase. Non-adjusted tests/CMakeLists.txt projects in other repositories should still be buildable with the current code, until they are updated to the new format. Adjust the Coin build instructions to build the standalone tests in a separate directory. Adjust pro2cmake to generate new structure for the tests/tests.pro projects. Adjust the qtbase tests project. Fixes: QTBUG-79239 Change-Id: Ib4b66bc772d8876cdcbae1e90ce5a5a5234fa675 Reviewed-by: Qt CMake Build Bot Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
2019-11-01 10:48:23 +00:00
# Of course we always need the test module as well.
find_package(Qt6 ${PROJECT_VERSION} CONFIG REQUIRED COMPONENTS Test)
CMake: Use correct C++ standard flag when building standalone tests Before the patch we set the standard flags in two places: - once when building qtbase - and always when including QtSetup (for every repo that is built) This change makes sure to also set the correct standards flag when building standalone tests, because QtSetup is called to early in that case. Change-Id: Iad130b731e9eb9605bb91637364c33fdd49ce3cb Reviewed-by: Leander Beernaert <leander.beernaert@qt.io> Reviewed-by: Lars Knoll <lars.knoll@qt.io>
2020-02-18 09:59:11 +00:00
# Set language standards after finding Core, because that's when the relevant
# feature variables are available, and the call in QtSetup is too early when building
# standalone tests, because Core was not find_package()'d yet.
qt_set_language_standards()
Make standalone tests build via top level repo project Previously repo/tests/CMakeLists.txt was a standalone project on which CMake could be called. This was useful for Coin to be able to build and package only tests, but was a bit troublesome because that means having to specify the usual boilerplate like minimum CMake version, which packages to find in every tests.pro project. Instead of having a separate standalone project, modify the top level project and associated CMake code to allow passing a special QT_BUILD_STANDALONE_TESTS variable, which causes the top level project to build only tests, and find Qt in the previously installed qt location. This also means that when building a repo, we generate a ${repo_name}TestsConfig.cmake file which does find_package on all the modules that have been built as part of that repo. So that when standalone tests bare built for that repo, the modules are automatically found. qt_set_up_standalone_tests_build() is modified to be a no-op because it is not needed anymore. Its usage should be removed from all the other repos, and then removed from qtbase. Non-adjusted tests/CMakeLists.txt projects in other repositories should still be buildable with the current code, until they are updated to the new format. Adjust the Coin build instructions to build the standalone tests in a separate directory. Adjust pro2cmake to generate new structure for the tests/tests.pro projects. Adjust the qtbase tests project. Fixes: QTBUG-79239 Change-Id: Ib4b66bc772d8876cdcbae1e90ce5a5a5234fa675 Reviewed-by: Qt CMake Build Bot Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
2019-11-01 10:48:23 +00:00
endif()
Allow building the tests directory as a standalone CMake project At the moment, Coin builds tests as a separate qmake invocation against an installed Qt. We need to support the same with CMake. Change the tests subdirectory to be a standalone CMake project when CMake does not detect an existing QtTest target while processing the subdirectory. If the target exists, it means we are building the whole repo, if the target does not exist, we need to call find_package to find the installed Qt. Refactor and move around a few things to make standalone tests build successfully: - add a new macro to set up paths to find QtSetup - add a new macro to find all macOS frameworks - add a new macro to set up building tests - add a new macro that actually builds the tests - export the INSTALL_CMAKE_NAMESPACE value into the BuildInternals Config file - export the CMAKE_BUILD_TYPE value, because a test project doesn't have a .git subdir and thus defaults to be built in Release mode, even though qtbase might have been built in Debug, so to avoid the mixing, the propagate the build type - stop overriding INSTALL_CMAKE_NAMESPACE and QT_CMAKE_EXPORT_NAMESPACE inside QtSetup if they are set, because the tests project doesn't specify a major version, and if we override the values, the moc / uic targets don't get the correct major version prefix and configuration fails Change-Id: Ibdb03687302567fe325a15f6d1cb922c76240675 Fixes: QTBUG-75090 Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
2019-05-22 08:22:08 +00:00
if(EXISTS "${CMAKE_CURRENT_SOURCE_DIR}/auto/CMakeLists.txt")
add_subdirectory(auto)
endif()
Add support for benchmark conversion Convert benchmark executables to add_qt_benchmark(). Currently add_qt_benchmark just calls add_qt_executable() and ensures that it they build under CMAKE_CURRENT_BUILD_DIR and do not install. Add QT_BUILD_BENCHMARKS option to enable/disable building of benchmarks. Change-Id: Id0bc676698d21d50048d97d9abef51d92ccb6638 Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
2019-10-28 14:35:47 +00:00
if(EXISTS "${CMAKE_CURRENT_SOURCE_DIR}/benchmarks/CMakeLists.txt" AND QT_BUILD_BENCHMARKS)
Allow building the tests directory as a standalone CMake project At the moment, Coin builds tests as a separate qmake invocation against an installed Qt. We need to support the same with CMake. Change the tests subdirectory to be a standalone CMake project when CMake does not detect an existing QtTest target while processing the subdirectory. If the target exists, it means we are building the whole repo, if the target does not exist, we need to call find_package to find the installed Qt. Refactor and move around a few things to make standalone tests build successfully: - add a new macro to set up paths to find QtSetup - add a new macro to find all macOS frameworks - add a new macro to set up building tests - add a new macro that actually builds the tests - export the INSTALL_CMAKE_NAMESPACE value into the BuildInternals Config file - export the CMAKE_BUILD_TYPE value, because a test project doesn't have a .git subdir and thus defaults to be built in Release mode, even though qtbase might have been built in Debug, so to avoid the mixing, the propagate the build type - stop overriding INSTALL_CMAKE_NAMESPACE and QT_CMAKE_EXPORT_NAMESPACE inside QtSetup if they are set, because the tests project doesn't specify a major version, and if we override the values, the moc / uic targets don't get the correct major version prefix and configuration fails Change-Id: Ibdb03687302567fe325a15f6d1cb922c76240675 Fixes: QTBUG-75090 Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
2019-05-22 08:22:08 +00:00
add_subdirectory(benchmarks)
endif()
Build test/manual if it contains a CMakeLists.txt Change-Id: Ibada60b0902f9c6a6a7284489a56106e0021a9de Reviewed-by: Simon Hausmann <simon.hausmann@qt.io> Reviewed-by: Qt CMake Build Bot Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
2019-11-08 10:23:04 +00:00
if(EXISTS "${CMAKE_CURRENT_SOURCE_DIR}/manual/CMakeLists.txt")
Merge remote-tracking branch 'origin/5.15' into dev Conflicts: examples/widgets/graphicsview/boxes/scene.h src/corelib/Qt5CoreMacros.cmake src/corelib/Qt6CoreMacros.cmake src/network/ssl/qsslsocket.cpp src/network/ssl/qsslsocket.h src/platformsupport/fontdatabases/windows/qwindowsfontenginedirectwrite.cpp src/testlib/CMakeLists.txt src/testlib/.prev_CMakeLists.txt tests/auto/corelib/tools/qscopeguard/tst_qscopeguard.cpp Disabled building manual tests with CMake for now, because qmake doesn't do it, and it confuses people. Done-With: Alexandru Croitor <alexandru.croitor@qt.io> Done-With: Volker Hilsheimer <volker.hilsheimer@qt.io> Change-Id: I865ae347bd01f4e59f16d007b66d175a52f1f152
2020-02-13 08:14:09 +00:00
# add_subdirectory(manual) don't build manual tests for now, because qmake doesn't.
Build test/manual if it contains a CMakeLists.txt Change-Id: Ibada60b0902f9c6a6a7284489a56106e0021a9de Reviewed-by: Simon Hausmann <simon.hausmann@qt.io> Reviewed-by: Qt CMake Build Bot Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
2019-11-08 10:23:04 +00:00
endif()
Allow building the tests directory as a standalone CMake project At the moment, Coin builds tests as a separate qmake invocation against an installed Qt. We need to support the same with CMake. Change the tests subdirectory to be a standalone CMake project when CMake does not detect an existing QtTest target while processing the subdirectory. If the target exists, it means we are building the whole repo, if the target does not exist, we need to call find_package to find the installed Qt. Refactor and move around a few things to make standalone tests build successfully: - add a new macro to set up paths to find QtSetup - add a new macro to find all macOS frameworks - add a new macro to set up building tests - add a new macro that actually builds the tests - export the INSTALL_CMAKE_NAMESPACE value into the BuildInternals Config file - export the CMAKE_BUILD_TYPE value, because a test project doesn't have a .git subdir and thus defaults to be built in Release mode, even though qtbase might have been built in Debug, so to avoid the mixing, the propagate the build type - stop overriding INSTALL_CMAKE_NAMESPACE and QT_CMAKE_EXPORT_NAMESPACE inside QtSetup if they are set, because the tests project doesn't specify a major version, and if we override the values, the moc / uic targets don't get the correct major version prefix and configuration fails Change-Id: Ibdb03687302567fe325a15f6d1cb922c76240675 Fixes: QTBUG-75090 Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
2019-05-22 08:22:08 +00:00
endmacro()
Fix Standalone Example build when crosscompiling Added qt_examples_begin() and qt_examples_end() macros to setup the example list so it can be re-used in other projects. When cross-compiling, we also need to set CMAKE_FIND_ROOT_PATH_MODE_PACKAGE to BOTH in order for find_package() to work correctly. Removed support for building the whole qtbase/examples folder as a standalone project. Building examples is only supported when building the whole of qtbase (qtbase + examples together) or each individual example is built separately against an installed Qt version. Change-Id: I9d26b94b48b95af230b76ab618becb21d2d45581 Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
2019-06-06 11:08:41 +00:00
macro(qt_examples_build_begin)
Fix examples find_package calls to work in prefix builds To build examples as part of a non-installed Qt prefix build, not-yet-installed Config files need to be found by find_package() calls inside example projects. Facilitate that by propagating the CMAKE_PREFIX_PATH and QT_EXAMPLES_CMAKE_PREFIX_PATH paths in all relevant find_package() calls where NO_DEFAULT_PATH is used. Also adjust the inclusion of the QtFeature.cmake file to be relative to the qt6 directory, rather than the current list directory. This is needed to successfully find the file when parsing a Config file from a non-installed build directory. Change-Id: I36031279628f1f7741d8f4d7571484a6545227f7 Reviewed-by: Qt CMake Build Bot Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
2019-09-19 11:46:37 +00:00
# Examples that are built as part of the Qt build need to use the CMake config files from the
# build dir, because they are not installed yet in a prefix build.
# Appending to CMAKE_PREFIX_PATH helps find the initial Qt6Config.cmake.
# Appending to QT_EXAMPLES_CMAKE_PREFIX_PATH helps find components of Qt6, because those
# find_package calls use NO_DEFAULT_PATH, and thus CMAKE_PREFIX_PATH is ignored.
Implement qtbase fixes for superbuilds Change-Id: I0d3445cf0740e3925fa9342dac4d07892518afe5 Reviewed-by: Qt CMake Build Bot Reviewed-by: Cristian Adam <cristian.adam@qt.io>
2019-11-21 12:33:28 +00:00
list(APPEND CMAKE_PREFIX_PATH "${QT_BUILD_DIR}")
list(APPEND QT_EXAMPLES_CMAKE_PREFIX_PATH "${QT_BUILD_DIR}")
Fix Standalone Example build when crosscompiling Added qt_examples_begin() and qt_examples_end() macros to setup the example list so it can be re-used in other projects. When cross-compiling, we also need to set CMAKE_FIND_ROOT_PATH_MODE_PACKAGE to BOTH in order for find_package() to work correctly. Removed support for building the whole qtbase/examples folder as a standalone project. Building examples is only supported when building the whole of qtbase (qtbase + examples together) or each individual example is built separately against an installed Qt version. Change-Id: I9d26b94b48b95af230b76ab618becb21d2d45581 Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
2019-06-06 11:08:41 +00:00
# Also make sure the CMake config files do not recreate the already-existing targets
set(QT_NO_CREATE_TARGETS TRUE)
set(BACKUP_CMAKE_FIND_ROOT_PATH_MODE_PACKAGE ${CMAKE_FIND_ROOT_PATH_MODE_PACKAGE})
set(CMAKE_FIND_ROOT_PATH_MODE_PACKAGE "BOTH")
CMake: Handle automatic rpath embedding correctly Instead of using CMAKE_INSTALL_RPATH to embed an absolute path to prefix/libdir into all targets, use the more sophisticated aproach that qmake does. For certain targets (modules, plugins, tools) use relative rpaths. Otherwise embed absolute paths (examples, regular binaries). Installed tests currently have no rpaths. On certain platforms rpaths are not used (Windows, Android, iOS / uikit). Frameworks, app bundles and shallow bundles should also be handled correctly. Additional rpaths can be provided via QT_EXTRA_RPATHS variable (similar to the -R option that configure takes). Automatic embedding can be disabled either via QT_FEATURE_rpath=OFF or QT_DISABLE_RPATH=ON. Note that installed examples are not relocatable at the moment (due to always having an absolute path rpath), so this is a missing feature compared to qmake. This is due to missing information on where examples will be installed, so a relative rpath can not be computed. By default a Qt installation is relocatable, so there is no need to pass -DQT_EXTRA_RPATHS=. like Coin used to do with qmake e.g. -R . Relative rpaths will have the appropriate 'relative base' prefixed to them (e.g $ORIGIN on linux and @loader_path on darwin platforms). There is currently no support for other platforms that might have a different 'relative base' than the ones mentioned above. Any extra rpaths are saved to BuildInternalsExtra which are re-used when building other repositories. configurejson2cmake modified to include correct conditions for the rpath feature. It's very likely that we will need a new qt_add_internal_app() function for gui apps that are to be installed to prefix/bin. For example for Assistant from qttools. Currently such apps use qt_add_executable(). The distinction is necessary to make sure that relative rpaths are embedded into apps, but not executables (which tests are part of). Amends e835a6853b9c0fb7af32798ed8965de3adf0e15b Task-number: QTBUG-83497 Change-Id: I3510f63c0a59489741116cc8ec3ef6a0a7704f25 Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
2020-04-15 16:48:26 +00:00
# Because CMAKE_INSTALL_RPATH is empty by default in the repo project, examples need to have
# it set here, so they can run when installed.
# This means that installed examples are not relocatable at the moment. We would need to
# annotate where each example is installed to, to be able to derive a relative rpath, and it
# seems there's no way to query such information from CMake itself.
set(CMAKE_INSTALL_RPATH "${_default_install_rpath}")
Fix Standalone Example build when crosscompiling Added qt_examples_begin() and qt_examples_end() macros to setup the example list so it can be re-used in other projects. When cross-compiling, we also need to set CMAKE_FIND_ROOT_PATH_MODE_PACKAGE to BOTH in order for find_package() to work correctly. Removed support for building the whole qtbase/examples folder as a standalone project. Building examples is only supported when building the whole of qtbase (qtbase + examples together) or each individual example is built separately against an installed Qt version. Change-Id: I9d26b94b48b95af230b76ab618becb21d2d45581 Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
2019-06-06 11:08:41 +00:00
endmacro()
macro(qt_examples_build_end)
# We use AUTOMOC/UIC/RCC in the examples. Make sure to not fail on a fresh Qt build, that e.g. the moc binary does not exist yet.
# This function gets all targets below this directory
function(get_all_targets _result _dir)
get_property(_subdirs DIRECTORY "${_dir}" PROPERTY SUBDIRECTORIES)
foreach(_subdir IN LISTS _subdirs)
get_all_targets(${_result} "${_subdir}")
endforeach()
get_property(_sub_targets DIRECTORY "${_dir}" PROPERTY BUILDSYSTEM_TARGETS)
set(${_result} ${${_result}} ${_sub_targets} PARENT_SCOPE)
endfunction()
get_all_targets(targets "${CMAKE_CURRENT_SOURCE_DIR}")
foreach(target ${targets})
cmake: Init uic only if Qt::Widgets is a target Otherwise we get errors like the following in non-gui projects: Error evaluating generator expression: $<TARGET_FILE:Qt6::uic> No target "Qt6::uic" Change-Id: I8a3a6f8ec5e5c1c3d1f73369c5739a321c64bfbb Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
2019-09-20 12:18:17 +00:00
qt_autogen_tools(${target} ENABLE_AUTOGEN_TOOLS "moc" "rcc")
if(TARGET Qt::Widgets)
qt_autogen_tools(${target} ENABLE_AUTOGEN_TOOLS "uic")
endif()
Fix Standalone Example build when crosscompiling Added qt_examples_begin() and qt_examples_end() macros to setup the example list so it can be re-used in other projects. When cross-compiling, we also need to set CMAKE_FIND_ROOT_PATH_MODE_PACKAGE to BOTH in order for find_package() to work correctly. Removed support for building the whole qtbase/examples folder as a standalone project. Building examples is only supported when building the whole of qtbase (qtbase + examples together) or each individual example is built separately against an installed Qt version. Change-Id: I9d26b94b48b95af230b76ab618becb21d2d45581 Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
2019-06-06 11:08:41 +00:00
endforeach()
set(CMAKE_FIND_ROOT_PATH_MODE_PACKAGE ${BACKUP_CMAKE_FIND_ROOT_PATH_MODE_PACKAGE})
endmacro()
Android: Final changes for APK generation Generate the ${MODULE}-android-dependencies.xml for the androiddeployqt tool. This will ensure all the right plugins and dependencies are packaged when generating the apk. This change also changes the visibility for executable to default/public. Not having this will cause the application to crash as we can't locate main() in the executable (shared library). Additionally pro2cmake conversion script has been updated to perform the required conversions for the Android settings. Finally, the 6 projects in QtBase that have Android dependencies have been updated with the new script and the step that produces the xml files in run at the end in QtPostProcess.cmake. Change-Id: I9774ba1b123bc11cae972fa37054ef2c51988498 Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
2019-06-24 12:54:40 +00:00
if (ANDROID)
Fix Android build for other Qt modules Install missing QtBuildInternalsAndroid to installation path. Change-Id: I6141ff72b57a6445f1718bc17d64a7ed59a91620 Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
2019-08-16 14:32:57 +00:00
include(${CMAKE_CURRENT_LIST_DIR}/QtBuildInternalsAndroid.cmake)
Android: Final changes for APK generation Generate the ${MODULE}-android-dependencies.xml for the androiddeployqt tool. This will ensure all the right plugins and dependencies are packaged when generating the apk. This change also changes the visibility for executable to default/public. Not having this will cause the application to crash as we can't locate main() in the executable (shared library). Additionally pro2cmake conversion script has been updated to perform the required conversions for the Android settings. Finally, the 6 projects in QtBase that have Android dependencies have been updated with the new script and the step that produces the xml files in run at the end in QtPostProcess.cmake. Change-Id: I9774ba1b123bc11cae972fa37054ef2c51988498 Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
2019-06-24 12:54:40 +00:00
endif()