mirror of
https://git.openwrt.org/openwrt/openwrt.git
synced 2026-09-09 00:06:08 +08:00
Robert Marko
f50435627d
Convert IPQ60xx and IPQ807x devices from the old NSS dataplane to the new PPE stack. IPQ50xx is not yet supported. Link: https://github.com/openwrt/openwrt/pull/22381 Signed-off-by: Robert Marko <robimarko@gmail.com>
455 lines
7.1 KiB
Devicetree
455 lines
7.1 KiB
Devicetree
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
|
|
|
/dts-v1/;
|
|
|
|
#include "ipq8074.dtsi"
|
|
#include "ipq8074-hk-cpu.dtsi"
|
|
#include "ipq8074-ess.dtsi"
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/input/input.h>
|
|
#include <dt-bindings/leds/common.h>
|
|
|
|
/ {
|
|
model = "Zbtlink ZBT-Z800AX";
|
|
compatible = "zbtlink,zbt-z800ax", "qcom,ipq8074";
|
|
|
|
aliases {
|
|
led-boot = &led_net;
|
|
led-failsafe = &led_net;
|
|
led-upgrade = &led_net;
|
|
serial0 = &blsp1_uart5;
|
|
/*
|
|
* Aliases as required by u-boot
|
|
* to patch MAC addresses
|
|
*/
|
|
ethernet0 = &swport1;
|
|
ethernet1 = &swport2;
|
|
ethernet2 = &swport3;
|
|
ethernet3 = &swport4;
|
|
ethernet4 = &swport5;
|
|
label-mac-device = &swport1;
|
|
};
|
|
|
|
chosen {
|
|
stdout-path = "serial0:115200n8";
|
|
bootargs-append = " root=/dev/ubiblock0_1";
|
|
};
|
|
|
|
gpio-export {
|
|
compatible = "gpio-export";
|
|
|
|
lte-power {
|
|
gpio-export,name = "lte_power";
|
|
gpio-export,output = <1>;
|
|
gpios = <&tlmm 55 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
};
|
|
|
|
keys {
|
|
compatible = "gpio-keys";
|
|
pinctrl-0 = <&button_pins>;
|
|
pinctrl-names = "default";
|
|
|
|
reset {
|
|
label = "reset";
|
|
linux,code = <KEY_RESTART>;
|
|
gpios = <&tlmm 34 GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
wps {
|
|
label = "wps";
|
|
linux,code = <KEY_WPS_BUTTON>;
|
|
gpios = <&tlmm 46 GPIO_ACTIVE_LOW>;
|
|
};
|
|
};
|
|
|
|
leds {
|
|
compatible = "gpio-leds";
|
|
|
|
led_net: net {
|
|
color = <LED_COLOR_ID_GREEN>;
|
|
function = LED_FUNCTION_WAN_ONLINE;
|
|
gpios = <&tlmm 22 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
module {
|
|
color = <LED_COLOR_ID_GREEN>;
|
|
function = LED_FUNCTION_MOBILE;
|
|
gpios = <&tlmm 30 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
wlan2g {
|
|
color = <LED_COLOR_ID_GREEN>;
|
|
function = LED_FUNCTION_WLAN_2GHZ;
|
|
gpios = <&tlmm 42 GPIO_ACTIVE_HIGH>;
|
|
linux,default-trigger = "phy1radio";
|
|
};
|
|
|
|
wlan5g {
|
|
color = <LED_COLOR_ID_GREEN>;
|
|
function = LED_FUNCTION_WLAN_5GHZ;
|
|
gpios = <&tlmm 43 GPIO_ACTIVE_HIGH>;
|
|
linux,default-trigger = "phy0radio";
|
|
};
|
|
};
|
|
};
|
|
|
|
&tlmm {
|
|
button_pins: button-pins {
|
|
mux {
|
|
pins = "gpio34", "gpio46";
|
|
function = "gpio";
|
|
drive-strength = <8>;
|
|
bias-pull-up;
|
|
};
|
|
};
|
|
|
|
mdio_pins: mdio-pins {
|
|
mdc {
|
|
pins = "gpio68";
|
|
function = "mdc";
|
|
drive-strength = <8>;
|
|
bias-pull-up;
|
|
};
|
|
|
|
mdio {
|
|
pins = "gpio69";
|
|
function = "mdio";
|
|
drive-strength = <8>;
|
|
bias-pull-up;
|
|
};
|
|
};
|
|
};
|
|
|
|
&blsp1_spi1 {
|
|
pinctrl-0 = <&spi_0_pins>;
|
|
pinctrl-names = "default";
|
|
cs-select = <0>;
|
|
status = "okay";
|
|
|
|
flash@0 {
|
|
compatible = "jedec,spi-nor";
|
|
reg = <0>;
|
|
spi-max-frequency = <50000000>;
|
|
|
|
partitions {
|
|
compatible = "fixed-partitions";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
partition@0 {
|
|
label = "0:sbl1";
|
|
reg = <0x0 0x50000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@50000 {
|
|
label = "0:mibib";
|
|
reg = <0x50000 0x10000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@60000 {
|
|
label = "0:bootconfig";
|
|
reg = <0x60000 0x20000>;
|
|
};
|
|
|
|
partition@80000 {
|
|
label = "0:bootconfig1";
|
|
reg = <0x80000 0x20000>;
|
|
};
|
|
|
|
partition@a0000 {
|
|
label = "0:qsee";
|
|
reg = <0xa0000 0x180000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@220000 {
|
|
label = "0:qsee_1";
|
|
reg = <0x220000 0x180000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@3a0000 {
|
|
label = "0:devcfg";
|
|
reg = <0x3a0000 0x10000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@3b0000 {
|
|
label = "0:devcfg_1";
|
|
reg = <0x3b0000 0x10000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@3c0000 {
|
|
label = "0:apdp";
|
|
reg = <0x3c0000 0x10000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@3d0000 {
|
|
label = "0:apdp_1";
|
|
reg = <0x3d0000 0x10000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@3e0000 {
|
|
label = "0:rpm";
|
|
reg = <0x3e0000 0x40000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@420000 {
|
|
label = "0:rpm_1";
|
|
reg = <0x420000 0x40000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@460000 {
|
|
label = "0:cdt";
|
|
reg = <0x460000 0x10000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@470000 {
|
|
label = "0:cdt_1";
|
|
reg = <0x470000 0x10000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@480000 {
|
|
label = "0:appsblenv";
|
|
reg = <0x480000 0x10000>;
|
|
};
|
|
|
|
partition@490000 {
|
|
label = "0:appsbl";
|
|
reg = <0x490000 0xa0000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@530000 {
|
|
label = "0:appsbl_1";
|
|
reg = <0x530000 0xa0000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@5d0000 {
|
|
label = "0:art";
|
|
reg = <0x5d0000 0x40000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@610000 {
|
|
label = "0:ethphyfw";
|
|
reg = <0x610000 0x80000>;
|
|
read-only;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&blsp1_uart5 {
|
|
status = "okay";
|
|
};
|
|
|
|
&cryptobam {
|
|
status = "okay";
|
|
};
|
|
|
|
&crypto {
|
|
status = "okay";
|
|
};
|
|
|
|
&prng {
|
|
status = "okay";
|
|
};
|
|
|
|
&qpic_bam {
|
|
status = "okay";
|
|
};
|
|
|
|
&qpic_nand {
|
|
status = "okay";
|
|
|
|
partitions {
|
|
status = "disabled";
|
|
};
|
|
|
|
nand@0 {
|
|
reg = <0>;
|
|
nand-ecc-strength = <8>;
|
|
nand-ecc-step-size = <512>;
|
|
nand-bus-width = <8>;
|
|
|
|
partitions {
|
|
compatible = "fixed-partitions";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
partition@0 {
|
|
label = "rootfs";
|
|
reg = <0x0000000 0x3400000>;
|
|
linux,rootfs;
|
|
};
|
|
|
|
partition@3400000 {
|
|
label = "0:wififw";
|
|
reg = <0x3400000 0x0800000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@3c00000 {
|
|
label = "rootfs_1";
|
|
reg = <0x3c00000 0x3400000>;
|
|
};
|
|
|
|
partition@7000000 {
|
|
label = "0:wififw_1";
|
|
reg = <0x7000000 0x0800000>;
|
|
read-only;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&qusb_phy_0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&qusb_phy_1 {
|
|
status = "okay";
|
|
};
|
|
|
|
&ssphy_0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&ssphy_1 {
|
|
status = "okay";
|
|
};
|
|
|
|
&usb_0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&usb_1 {
|
|
status = "okay";
|
|
};
|
|
|
|
&mdio {
|
|
status = "okay";
|
|
|
|
pinctrl-0 = <&mdio_pins>;
|
|
pinctrl-names = "default";
|
|
reset-gpios = <&tlmm 37 GPIO_ACTIVE_LOW>;
|
|
|
|
ethernet-phy-package@0 {
|
|
compatible = "qcom,qca8075-package";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0>;
|
|
|
|
qca8075_0: ethernet-phy@0 {
|
|
compatible = "ethernet-phy-ieee802.3-c22";
|
|
reg = <0>;
|
|
};
|
|
|
|
qca8075_1: ethernet-phy@1 {
|
|
compatible = "ethernet-phy-ieee802.3-c22";
|
|
reg = <1>;
|
|
};
|
|
|
|
qca8075_2: ethernet-phy@2 {
|
|
compatible = "ethernet-phy-ieee802.3-c22";
|
|
reg = <2>;
|
|
};
|
|
|
|
qca8075_3: ethernet-phy@3 {
|
|
compatible = "ethernet-phy-ieee802.3-c22";
|
|
reg = <3>;
|
|
};
|
|
|
|
qca8075_4: ethernet-phy@4 {
|
|
compatible = "ethernet-phy-ieee802.3-c22";
|
|
reg = <4>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&uniphy0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&switch {
|
|
status = "okay";
|
|
|
|
ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
port@0 {
|
|
reg = <0>;
|
|
ethernet = <&edma>;
|
|
phy-mode = "internal";
|
|
|
|
fixed-link {
|
|
speed = <1000>;
|
|
full-duplex;
|
|
};
|
|
};
|
|
|
|
swport1: port@1 {
|
|
reg = <1>;
|
|
label = "lan1";
|
|
phy-handle = <&qca8075_0>;
|
|
phy-mode = "psgmii";
|
|
pcs-handle = <&uniphy0 0>;
|
|
};
|
|
|
|
swport2: port@2 {
|
|
reg = <2>;
|
|
label = "lan2";
|
|
phy-handle = <&qca8075_1>;
|
|
phy-mode = "psgmii";
|
|
pcs-handle = <&uniphy0 1>;
|
|
};
|
|
|
|
swport3: port@3 {
|
|
reg = <3>;
|
|
label = "lan3";
|
|
phy-handle = <&qca8075_2>;
|
|
phy-mode = "psgmii";
|
|
pcs-handle = <&uniphy0 2>;
|
|
};
|
|
|
|
swport4: port@4 {
|
|
reg = <4>;
|
|
label = "lan4";
|
|
phy-handle = <&qca8075_3>;
|
|
phy-mode = "psgmii";
|
|
pcs-handle = <&uniphy0 3>;
|
|
};
|
|
|
|
swport5: port@5 {
|
|
reg = <5>;
|
|
label = "wan";
|
|
phy-handle = <&qca8075_4>;
|
|
phy-mode = "psgmii";
|
|
pcs-handle = <&uniphy0 4>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&edma {
|
|
status = "okay";
|
|
};
|
|
|
|
&wifi {
|
|
status = "okay";
|
|
|
|
qcom,ath11k-calibration-variant = "ZBT-Z800AX";
|
|
};
|