qiurui
/
openwrt
mirror of https://git.openwrt.org/openwrt/openwrt.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
openwrt/target/linux/realtek/dts/rtl9303_xikestor_sks8300-8x...

458 lines
8.4 KiB
Plaintext
Raw Blame History

// SPDX-License-Identifier: GPL-2.0-or-later
#include "rtl930x.dtsi"
#include <dt-bindings/input/input.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/leds/common.h>
/ {
compatible = "xikestor,sks8300-8x", "realtek,rtl930x-soc";
model = "XikeStor SKS8300-8X";
memory@0 {
device_type = "memory";
reg = <0x00000000 0x10000000>, /* first 256 MiB */
<0x20000000 0x10000000>; /* remaining 256 MiB */
};
aliases {
led-boot = &led_sys;
led-failsafe = &led_sys;
led-running = &led_sys;
led-upgrade = &led_sys;
};
chosen {
stdout-path = "serial0:9600n8";
};
i2c_master: i2c@1b00036c {
compatible = "realtek,rtl9300-i2c";
reg = <0x1b00036c 0x3c>;
#address-cells = <1>;
#size-cells = <0>;
scl-pin = <8>;
sda-pin = <9>;
clock-frequency = <100000>;
};
i2c-mux {
compatible = "realtek,i2c-mux-rtl9300";
i2c-parent = <&i2c_master>;
#address-cells = <1>;
#size-cells = <0>;
i2c0: i2c@0 {
reg = <0>;
scl-pin = <8>;
sda-pin = <9>;
};
i2c1: i2c@1 {
reg = <1>;
scl-pin = <8>;
sda-pin = <10>;
};
i2c2: i2c@2 {
reg = <2>;
scl-pin = <8>;
sda-pin = <11>;
};
i2c3: i2c@3 {
reg = <3>;
scl-pin = <8>;
sda-pin = <12>;
};
i2c4: i2c@4 {
reg = <4>;
scl-pin = <8>;
sda-pin = <13>;
};
i2c5: i2c@5 {
reg = <5>;
scl-pin = <8>;
sda-pin = <14>;
};
i2c6: i2c@6 {
reg = <6>;
scl-pin = <8>;
sda-pin = <15>;
};
i2c7: i2c@7 {
reg = <7>;
scl-pin = <8>;
sda-pin = <16>;
};
};
keys {
compatible = "gpio-keys";
button-reset {
label = "reset";
gpios = <&gpio0 22 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
};
leds {
compatible = "gpio-leds";
led_sys: led-0 {
gpios = <&gpio0 23 GPIO_ACTIVE_HIGH>;
color = <LED_COLOR_ID_GREEN>;
function = LED_FUNCTION_STATUS;
};
};
led_set {
compatible = "realtek,rtl9300-leds";
active-low;
/*
* LED set 0
*
* - LED[0](Green): 10G/LINK/ACT
* - LED[1](Amber): 10M/100M/1G/2.5G/5G/LINK/ACT
*/
led_set0 = <0x0baa 0x0a01>;
};
sfp0: sfp-p1 {
compatible = "sff,sfp";
i2c-bus = <&i2c0>;
los-gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>;
mod-def0-gpio = <&gpio1 1 GPIO_ACTIVE_LOW>;
tx-disable-gpio = <&gpio1 2 GPIO_ACTIVE_HIGH>;
maximum-power-milliwatt = <2900>;
#thermal-sensor-cells = <0>;
};
sfp1: sfp-p2 {
compatible = "sff,sfp";
i2c-bus = <&i2c1>;
los-gpio = <&gpio1 3 GPIO_ACTIVE_HIGH>;
mod-def0-gpio = <&gpio1 4 GPIO_ACTIVE_LOW>;
tx-disable-gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>;
maximum-power-milliwatt = <1500>;
#thermal-sensor-cells = <0>;
};
sfp2: sfp-p3 {
compatible = "sff,sfp";
i2c-bus = <&i2c2>;
los-gpio = <&gpio1 6 GPIO_ACTIVE_HIGH>;
mod-def0-gpio = <&gpio1 7 GPIO_ACTIVE_LOW>;
tx-disable-gpio = <&gpio1 8 GPIO_ACTIVE_HIGH>;
maximum-power-milliwatt = <1500>;
#thermal-sensor-cells = <0>;
};
sfp3: sfp-p4 {
compatible = "sff,sfp";
i2c-bus = <&i2c3>;
los-gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>;
mod-def0-gpio = <&gpio1 10 GPIO_ACTIVE_LOW>;
tx-disable-gpio = <&gpio1 11 GPIO_ACTIVE_HIGH>;
maximum-power-milliwatt = <2000>;
#thermal-sensor-cells = <0>;
};
sfp4: sfp-p5 {
compatible = "sff,sfp";
i2c-bus = <&i2c4>;
los-gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
mod-def0-gpio = <&gpio1 13 GPIO_ACTIVE_LOW>;
tx-disable-gpio = <&gpio1 14 GPIO_ACTIVE_HIGH>;
maximum-power-milliwatt = <2000>;
#thermal-sensor-cells = <0>;
};
sfp5: sfp-p6 {
compatible = "sff,sfp";
i2c-bus = <&i2c5>;
los-gpio = <&gpio1 21 GPIO_ACTIVE_HIGH>;
mod-def0-gpio = <&gpio1 22 GPIO_ACTIVE_LOW>;
tx-disable-gpio = <&gpio1 23 GPIO_ACTIVE_HIGH>;
maximum-power-milliwatt = <1500>;
#thermal-sensor-cells = <0>;
};
sfp6: sfp-p7 {
compatible = "sff,sfp";
i2c-bus = <&i2c6>;
los-gpio = <&gpio1 24 GPIO_ACTIVE_HIGH>;
mod-def0-gpio = <&gpio1 25 GPIO_ACTIVE_LOW>;
tx-disable-gpio = <&gpio1 26 GPIO_ACTIVE_HIGH>;
maximum-power-milliwatt = <1500>;
#thermal-sensor-cells = <0>;
};
sfp7: sfp-p8 {
compatible = "sff,sfp";
i2c-bus = <&i2c7>;
los-gpio = <&gpio1 27 GPIO_ACTIVE_HIGH>;
mod-def0-gpio = <&gpio1 28 GPIO_ACTIVE_LOW>;
tx-disable-gpio = <&gpio1 29 GPIO_ACTIVE_HIGH>;
maximum-power-milliwatt = <2900>;
#thermal-sensor-cells = <0>;
};
};
&mdio_aux {
status = "okay";
gpio1: gpio@0 {
compatible = "realtek,rtl8231";
reg = <0>;
gpio-controller;
#gpio-cells = <2>;
gpio-ranges = <&gpio1 0 0 37>;
led-controller {
compatible = "realtek,rtl8231-leds";
status = "disabled";
};
};
};
&spi0 {
status = "okay";
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <10000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x0 0x100000>;
read-only;
};
/* "flash_raw" on stock */
partition@100000 {
label = "board-info";
reg = <0x100000 0x30000>;
read-only;
};
partition@130000 {
label = "syslog";
reg = <0x130000 0xd0000>;
read-only;
};
/* "flash_user" on stock */
partition@200000 {
compatible = "fixed-partitions";
label = "firmware";
reg = <0x200000 0x1e00000>;
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "kernel";
reg = <0x0 0x800000>;
};
partition@800000 {
label = "rootfs";
reg = <0x800000 0x1600000>;
};
};
};
};
};
&ethernet0 {
mdio: mdio-bus {
compatible = "realtek,rtl838x-mdio";
regmap = <&ethernet0>;
#address-cells = <1>;
#size-cells = <0>;
phy0: ethernet-phy@0 {
compatible = "ethernet-phy-ieee802.3-c22";
phy-is-integrated;
reg = <0>;
sds = <2>;
};
phy8: ethernet-phy@8 {
compatible = "ethernet-phy-ieee802.3-c22";
phy-is-integrated;
reg = <8>;
sds = <3>;
};
phy16: ethernet-phy@10 {
compatible = "ethernet-phy-ieee802.3-c22";
phy-is-integrated;
reg = <16>;
sds = <4>;
};
phy20: ethernet-phy@14 {
compatible = "ethernet-phy-ieee802.3-c22";
phy-is-integrated;
reg = <20>;
sds = <5>;
};
phy24: ethernet-phy@18 {
compatible = "ethernet-phy-ieee802.3-c22";
phy-is-integrated;
reg = <24>;
sds = <6>;
};
phy25: ethernet-phy@19 {
compatible = "ethernet-phy-ieee802.3-c22";
phy-is-integrated;
reg = <25>;
sds = <7>;
};
phy26: ethernet-phy@1a {
compatible = "ethernet-phy-ieee802.3-c22";
phy-is-integrated;
reg = <26>;
sds = <8>;
};
phy27: ethernet-phy@1b {
compatible = "ethernet-phy-ieee802.3-c22";
phy-is-integrated;
reg = <27>;
sds = <9>;
};
};
};
&switch0 {
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
label = "lan1";
pseudo-phy-handle = <&phy0>;
phy-mode = "10gbase-r";
sfp = <&sfp0>;
managed = "in-band-status";
led-set = <0>;
};
port@8 {
reg = <8>;
label = "lan2";
pseudo-phy-handle = <&phy8>;
phy-mode = "10gbase-r";
sfp = <&sfp1>;
managed = "in-band-status";
led-set = <0>;
};
port@10 {
reg = <16>;
label = "lan3";
pseudo-phy-handle = <&phy16>;
phy-mode = "10gbase-r";
sfp = <&sfp2>;
managed = "in-band-status";
led-set = <0>;
};
port@14 {
reg = <20>;
label = "lan4";
pseudo-phy-handle = <&phy20>;
phy-mode = "10gbase-r";
sfp = <&sfp3>;
managed = "in-band-status";
led-set = <0>;
};
port@18 {
reg = <24>;
label = "lan5";
pseudo-phy-handle = <&phy24>;
phy-mode = "10gbase-r";
sfp = <&sfp4>;
managed = "in-band-status";
led-set = <0>;
};
port@19 {
reg = <25>;
label = "lan6";
pseudo-phy-handle = <&phy25>;
phy-mode = "10gbase-r";
sfp = <&sfp5>;
managed = "in-band-status";
led-set = <0>;
};
port@1a {
reg = <26>;
label = "lan7";
pseudo-phy-handle = <&phy26>;
phy-mode = "10gbase-r";
sfp = <&sfp6>;
managed = "in-band-status";
led-set = <0>;
};
port@1b {
reg = <27>;
label = "lan8";
pseudo-phy-handle = <&phy27>;
phy-mode = "10gbase-r";
sfp = <&sfp7>;
managed = "in-band-status";
led-set = <0>;
};
port@1c {
ethernet = <&ethernet0>;
reg = <28>;
phy-mode = "internal";
fixed-link {
speed = <10000>;
full-duplex;
};
};
};
};
&thermal_zones {
sfp-thermal {
polling-delay-passive = <10000>;
polling-delay = <10000>;
thermal-sensors = <&sfp0>, <&sfp1>, <&sfp2>, <&sfp3>, <&sfp4>, <&sfp5>, <&sfp6>, <&sfp7>;
trips {
sfp-crit {
temperature = <110000>;
hysteresis = <1000>;
type = "critical";
};
};
};
};
Reference in New Issue View Git Blame Copy Permalink