qiurui
/
openwrt
mirror of https://git.openwrt.org/openwrt/openwrt.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
openwrt/target/linux/realtek/dts/rtl9303_vimin_vm-s100-0800m...

347 lines
6.4 KiB
Plaintext
Raw Blame History

// SPDX-License-Identifier: GPL-2.0-or-later
#include "rtl930x.dtsi"
#include <dt-bindings/input/input.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/leds/common.h>
/ {
compatible = "vimin,vm-s100-0800ms", "realtek,rtl930x-soc";
model = "Vimin VM-S100-0800MS";
memory@0 {
device_type = "memory";
reg = <0x00000000 0x10000000>, /* first 256 MiB */
<0x20000000 0x10000000>; /* remaining 256 MiB */
};
chosen {
stdout-path = "serial0:115200n8";
};
keys {
compatible = "gpio-keys";
button-reset {
label = "reset";
gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
};
led_set {
compatible = "realtek,rtl9300-leds";
active-low;
/*
* LED set 0
*
* - LED[0](Green): 10M/100M/1G/2.5G/5G/10G/LINK/ACT
*/
led_set0 = <0x0bab>;
};
sfp0: sfp-p1 {
compatible = "sff,sfp";
i2c-bus = <&i2c0>;
los-gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>;
mod-def0-gpio = <&gpio1 1 GPIO_ACTIVE_LOW>;
tx-disable-gpio = <&gpio1 2 GPIO_ACTIVE_HIGH>;
maximum-power-milliwatt = <2900>;
#thermal-sensor-cells = <0>;
};
sfp1: sfp-p2 {
compatible = "sff,sfp";
i2c-bus = <&i2c1>;
los-gpio = <&gpio1 3 GPIO_ACTIVE_HIGH>;
mod-def0-gpio = <&gpio1 4 GPIO_ACTIVE_LOW>;
tx-disable-gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>;
maximum-power-milliwatt = <1500>;
#thermal-sensor-cells = <0>;
};
sfp2: sfp-p3 {
compatible = "sff,sfp";
i2c-bus = <&i2c2>;
los-gpio = <&gpio1 6 GPIO_ACTIVE_HIGH>;
mod-def0-gpio = <&gpio1 7 GPIO_ACTIVE_LOW>;
tx-disable-gpio = <&gpio1 8 GPIO_ACTIVE_HIGH>;
maximum-power-milliwatt = <1500>;
#thermal-sensor-cells = <0>;
};
sfp3: sfp-p4 {
compatible = "sff,sfp";
i2c-bus = <&i2c3>;
los-gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>;
mod-def0-gpio = <&gpio1 10 GPIO_ACTIVE_LOW>;
tx-disable-gpio = <&gpio1 11 GPIO_ACTIVE_HIGH>;
maximum-power-milliwatt = <2000>;
#thermal-sensor-cells = <0>;
};
sfp4: sfp-p5 {
compatible = "sff,sfp";
i2c-bus = <&i2c4>;
los-gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
mod-def0-gpio = <&gpio1 13 GPIO_ACTIVE_LOW>;
tx-disable-gpio = <&gpio1 14 GPIO_ACTIVE_HIGH>;
maximum-power-milliwatt = <2000>;
#thermal-sensor-cells = <0>;
};
sfp5: sfp-p6 {
compatible = "sff,sfp";
i2c-bus = <&i2c5>;
los-gpio = <&gpio1 21 GPIO_ACTIVE_HIGH>;
mod-def0-gpio = <&gpio1 22 GPIO_ACTIVE_LOW>;
tx-disable-gpio = <&gpio1 23 GPIO_ACTIVE_HIGH>;
maximum-power-milliwatt = <1500>;
#thermal-sensor-cells = <0>;
};
sfp6: sfp-p7 {
compatible = "sff,sfp";
i2c-bus = <&i2c6>;
los-gpio = <&gpio1 24 GPIO_ACTIVE_HIGH>;
mod-def0-gpio = <&gpio1 25 GPIO_ACTIVE_LOW>;
tx-disable-gpio = <&gpio1 26 GPIO_ACTIVE_HIGH>;
maximum-power-milliwatt = <1500>;
#thermal-sensor-cells = <0>;
};
sfp7: sfp-p8 {
compatible = "sff,sfp";
i2c-bus = <&i2c7>;
los-gpio = <&gpio1 27 GPIO_ACTIVE_HIGH>;
mod-def0-gpio = <&gpio1 28 GPIO_ACTIVE_LOW>;
tx-disable-gpio = <&gpio1 29 GPIO_ACTIVE_HIGH>;
maximum-power-milliwatt = <2900>;
#thermal-sensor-cells = <0>;
};
};
&i2c_mst1 {
status = "okay";
/* SDA0-7 correspond to GPIO9-16 */
i2c0: i2c@0 {
reg = <0>;
};
i2c1: i2c@1 {
reg = <1>;
};
i2c2: i2c@2 {
reg = <2>;
};
i2c3: i2c@3 {
reg = <3>;
};
i2c4: i2c@4 {
reg = <4>;
};
i2c5: i2c@5 {
reg = <5>;
};
i2c6: i2c@6 {
reg = <6>;
};
i2c7: i2c@7 {
reg = <7>;
};
};
&mdio_aux {
status = "okay";
gpio1: gpio@0 {
compatible = "realtek,rtl8231";
reg = <0>;
gpio-controller;
#gpio-cells = <2>;
gpio-ranges = <&gpio1 0 0 37>;
led-controller {
compatible = "realtek,rtl8231-leds";
status = "disabled";
};
};
};
&spi0 {
status = "okay";
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <10000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x0 0xe0000>;
read-only;
};
partition@e0000 {
label = "u-boot-env";
reg = <0xe0000 0x10000>;
};
partition@f0000 {
label = "u-boot-env2";
reg = <0xf0000 0x10000>;
read-only;
};
partition@100000 {
label = "jffs";
reg = <0x100000 0x100000>;
};
partition@200000 {
label = "jffs2";
reg = <0x200000 0x100000>;
};
partition@300000 {
label = "firmware";
reg = <0x300000 0xd00000>;
compatible = "openwrt,uimage", "denx,uimage";
openwrt,ih-magic = <0x93000000>;
};
};
};
};
&mdio_bus0 {
INTERNAL_PHY_SDS(0, 2)
INTERNAL_PHY_SDS(8, 3)
INTERNAL_PHY_SDS(16, 4)
INTERNAL_PHY_SDS(20, 5)
INTERNAL_PHY_SDS(24, 6)
INTERNAL_PHY_SDS(25, 7)
INTERNAL_PHY_SDS(26, 8)
INTERNAL_PHY_SDS(27, 9)
};
&switch0 {
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
label = "lan1";
phy-handle = <&phy0>;
phy-mode = "1000base-x";
sfp = <&sfp0>;
managed = "in-band-status";
led-set = <0>;
};
port@8 {
reg = <8>;
label = "lan2";
phy-handle = <&phy8>;
phy-mode = "1000base-x";
sfp = <&sfp1>;
managed = "in-band-status";
led-set = <0>;
};
port@10 {
reg = <16>;
label = "lan3";
phy-handle = <&phy16>;
phy-mode = "1000base-x";
sfp = <&sfp2>;
managed = "in-band-status";
led-set = <0>;
};
port@14 {
reg = <20>;
label = "lan4";
phy-handle = <&phy20>;
phy-mode = "1000base-x";
sfp = <&sfp3>;
managed = "in-band-status";
led-set = <0>;
};
port@18 {
reg = <24>;
label = "lan5";
phy-handle = <&phy24>;
phy-mode = "1000base-x";
sfp = <&sfp4>;
managed = "in-band-status";
led-set = <0>;
};
port@19 {
reg = <25>;
label = "lan6";
phy-handle = <&phy25>;
phy-mode = "1000base-x";
sfp = <&sfp5>;
managed = "in-band-status";
led-set = <0>;
};
port@1a {
reg = <26>;
label = "lan7";
phy-handle = <&phy26>;
phy-mode = "1000base-x";
sfp = <&sfp6>;
managed = "in-band-status";
led-set = <0>;
};
port@1b {
reg = <27>;
label = "lan8";
phy-handle = <&phy27>;
phy-mode = "1000base-x";
sfp = <&sfp7>;
managed = "in-band-status";
led-set = <0>;
};
port@1c {
ethernet = <&ethernet0>;
reg = <28>;
phy-mode = "internal";
fixed-link {
speed = <10000>;
full-duplex;
};
};
};
};
&thermal_zones {
sfp-thermal {
polling-delay-passive = <10000>;
polling-delay = <10000>;
thermal-sensors = <&sfp0>, <&sfp1>, <&sfp2>, <&sfp3>, <&sfp4>, <&sfp5>, <&sfp6>, <&sfp7>;
trips {
sfp-crit {
temperature = <110000>;
hysteresis = <1000>;
type = "critical";
};
};
};
};
Reference in New Issue View Git Blame Copy Permalink