qiurui
/
openwrt
mirror of https://git.openwrt.org/openwrt/openwrt.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity

qualcommax: ipq50xx: Add support for Linksys MR5500 

Add support for Linksys MR5500 (Hydra 6 Pro).

Speficiations:
* SoC: Qualcomm IPQ5018 (64-bit dual-core ARM Cortex-A53 @ 1.0Ghz)
* Memory: Kingston D2516ECMDXGJD (512 MiB)
* Serial Port: 3v3 TTL 115200n8
* Wi-Fi: IPQ5018 (2x2 2.4 Ghz 802.11b/g/n/ax)
         QCN9024 (4x4:4 5 Ghz 802.11an/ac/ax)
* Ethernet: IPQ5018 integrated virtual switch connected to an external
            QCA8337 switch (4 Ports 10/100/1000 GBASE-T)
* Flash: Gigadevice GD5F2GQ5REYIH (256 MiB)
* LEDs: 1x multi-color PWM LED
        1x blue led for USB (GPIO 19 Active High)
* Buttons: 1x WPS (GPIO 27 Active Low)
           1x Reset (GPIO 28 Acive Low)
           5x ethernet port LEDs (amber for activity & green for link up)
* Peripherals: 1x USB2 (powered by GPIO 17 Active Low)
               support for USB3 will be added in a separate PR
* FCC ID: 2AYRA-03734

Flash instructions:
1. On OEM firmware, login to the device (typically at http://192.168.1.1) and click 'CA'
in the bottom right corner -> Connectivity -> Manual Upgrade. Alternatively, browse to
http://<router IP>/fwupdate.html.
Upgrade firmware using openwrt-qualcommax-ipq50xx-linksys_mr5500-squashfs-factory.bin image.
Optionally install on second partition, after first boot check actual partition:
fw_printenv -n boot_part
and install firmware on second partition using command in case of 2:
mtd -r -e kernel -n write openwrt-qualcommax-ipq50xx-linksys_mr5500-squashfs-factory.bin kernel
and in case of 1:
mtd -r -e alt_kernel -n write openwrt-qualcommax-ipq50xx-linksys_mr5500-squashfs-factory.bin alt_kernel
2. Installation using serial connection from OEM firmware (default login: root, password: admin):
fw_printenv -n boot_part
In case of 2:
flash_erase /dev/mtd12 0 0
nandwrite -p /dev/mtd12 openwrt-qualcommax-ipq50xx-linksys_mr5500-squashfs-factory.bin
or in case of 1:
flash_erase /dev/mtd14 0 0
nandwrite -p /dev/mtd14 openwrt-qualcommax-ipq50xx-linksys_mr5500-squashfs-factory.bin
After first boot install firmware on second partition:
mtd -r -e kernel -n write openwrt-qualcommax-ipq50xx-linksys_mr5500-squashfs-factory.bin kernel
or:
mtd -r -e alt_kernel -n write openwrt-qualcommax-ipq50xx-linksys_mr5500-squashfs-factory.bin alt_kernel
3. Back to the OEM firmware.
Download firmware from OEM website:
MR5500: https://support.linksys.com/kb/article/207-en/
From serial or SSH:
fw_printenv boot_part
in case of 1:
mtd -r -e alt_kernel -n write FW_MR5500_1.1.2.209598_prod.img alt_kernel
else in case of 2:
mtd -r -e kernel -n write FW_MR5500_1.1.2.209598_prod.img kernel
4. Boot from USB
This allows you loading an OpenWrt image into RAM and is meant for recovery scenarios only.
Enable loading image from USB in u-boot. From serial or SSH:
fw_setenv bootusb 'usb start && usbboot &loadaddr && bootm $loadaddr'
fw_setenv bootcmd 'run bootusb; if test $auto_recovery = no; then bootipq; elif test $boot_part = 1; then run bootpart1; else run bootpart2; fi'
Copy OpenWrt initramfs image to USB:
dd bs=1M if=openwrt-qualcommax-ipq50xx-linksys_mr5500-initramfs-uImage.itb of=/dev/sda

Signed-off-by: George Moussalem <george.moussalem@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/17958
Signed-off-by: Robert Marko <robimarko@gmail.com>
This commit is contained in:
George Moussalem 2025-02-13 09:54:44 +04:00 committed by Robert Marko
parent 86fd00b0fb
commit 9a7192c08e
10 changed files with 437 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

1
package/boot/uboot-envtools/files/qualcommax_ipq50xx
View File

@ -8,6 +8,7 @@ touch /etc/config/ubootenv
board=$(board_name)
case "$board" in
linksys,mr5500|\
linksys,mx2000|\
linksys,mx5500|\
linksys,spnmx56)

2
package/firmware/ipq-wifi/Makefile
View File

@ -39,6 +39,7 @@ ALLWIFIBOARDS:= \
edgecore_eap102 \
edimax_cax1800 \
linksys_homewrk \
linksys_mr5500 \
linksys_mr7350 \
linksys_mx2000 \
linksys_mx4200 \
@ -179,6 +180,7 @@ $(eval $(call generate-ipq-wifi-package,dynalink_dl-wrx36,Dynalink DL-WRX36))
$(eval $(call generate-ipq-wifi-package,edgecore_eap102,Edgecore EAP102))
$(eval $(call generate-ipq-wifi-package,edimax_cax1800,Edimax CAX1800))
$(eval $(call generate-ipq-wifi-package,linksys_homewrk,Linksys HomeWRK))
$(eval $(call generate-ipq-wifi-package,linksys_mr5500,Linksys MR5500))
$(eval $(call generate-ipq-wifi-package,linksys_mr7350,Linksys MR7350))
$(eval $(call generate-ipq-wifi-package,linksys_mx2000,Linksys MX2000))
$(eval $(call generate-ipq-wifi-package,linksys_mx4200,Linksys MX4200))

387
target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq5018-mr5500.dts Normal file
View File

@ -0,0 +1,387 @@
/dts-v1/;
#include "ipq5018.dtsi"
#include "ipq5018-mx-base.dtsi"
/ {
model = "Linksys MR5500";
compatible = "linksys,mr5500", "qcom,ipq5018";
gpio-leds {
compatible = "gpio-leds";
usb {
color = <LED_COLOR_ID_BLUE>;
function = LED_FUNCTION_USB;
gpios = <&tlmm 19 GPIO_ACTIVE_HIGH>;
trigger-sources = <&usb_port1>;
linux,default-trigger = "usbport";
};
};
regulator_fixed_5p0: regulator-s0500 {
compatible = "regulator-fixed";
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <500000>;
regulator-name = "fixed_5p0";
gpio = <&tlmm 17 GPIO_ACTIVE_LOW>;
};
};
/*
* ===============================================================
* _______________________ _______________________
* | IPQ5018 | | QCA8337 |
* | +------+ +--------+ | | +--------+ +------+ |
* | | MAC0 |---| GE Phy | | | | Phy0 |---| MAC1 | |
* | +------+ +--------+ | | +--------+ +------+ |
* | +------+ +--------+ | | +--------+ +------+ |
* | | MAC1 |---| Uniphy |-+-SGMII-+-| SerDes |---| MAC6 | |
* | +------+ +--------+ | | +--------+ +------+ |
* |_______________________| |_______________________|
*
* ===============================================================
*/
&switch {
status = "okay";
switch_mac_mode = <MAC_MODE_SGMII_CHANNEL0>;
qcom,port_phyinfo {
// MAC0 -> GE Phy
port@0 {
port_id = <1>;
mdiobus = <&mdio0>;
phy_address = <7>;
};
// MAC1 ---SGMII---> QCA8337 SerDes
port@1 {
port_id = <2>;
forced-speed = <1000>;
forced-duplex = <1>;
};
};
};
// MAC1 ---SGMII---> QCA8337 SerDes
&dp2 {
status = "okay";
nvmem-cells = <&hw_mac_addr 0>;
nvmem-cell-names = "mac-address";
fixed-link {
speed = <1000>;
full-duplex;
};
};
&mdio0 {
status = "okay";
};
&mdio1 {
status = "okay";
pinctrl-0 = <&mdio1_pins>;
pinctrl-names = "default";
reset-gpios = <&tlmm 39 GPIO_ACTIVE_LOW>;
switch1: ethernet-switch@17 {
compatible = "qca,qca8337";
reg = <17>;
#address-cells = <1>;
#size-cells = <0>;
ports {
#address-cells = <1>;
#size-cells = <0>;
port@1 {
reg = <1>;
label = "lan1";
phy-handle = <&qca8337_0>;
phy-mode = "internal";
leds {
#address-cells = <1>;
#size-cells = <0>;
led@0 {
reg = <0>;
color = <LED_COLOR_ID_GREEN>;
function = LED_FUNCTION_LAN;
default-state = "keep";
};
led@1 {
reg = <1>;
color = <LED_COLOR_ID_AMBER>;
function = LED_FUNCTION_LAN;
default-state = "keep";
};
};
};
port@2 {
reg = <2>;
label = "lan2";
phy-handle = <&qca8337_1>;
phy-mode = "internal";
leds {
#address-cells = <1>;
#size-cells = <0>;
led@0 {
reg = <0>;
color = <LED_COLOR_ID_GREEN>;
function = LED_FUNCTION_LAN;
default-state = "keep";
};
led@1 {
reg = <1>;
color = <LED_COLOR_ID_AMBER>;
function = LED_FUNCTION_LAN;
default-state = "keep";
};
};
};
port@3 {
reg = <3>;
label = "lan3";
phy-handle = <&qca8337_2>;
phy-mode = "internal";
leds {
#address-cells = <1>;
#size-cells = <0>;
led@0 {
reg = <0>;
color = <LED_COLOR_ID_GREEN>;
function = LED_FUNCTION_LAN;
default-state = "keep";
};
led@1 {
reg = <1>;
color = <LED_COLOR_ID_AMBER>;
function = LED_FUNCTION_LAN;
default-state = "keep";
};
};
};
port@4 {
reg = <4>;
label = "lan4";
phy-handle = <&qca8337_3>;
phy-mode = "internal";
leds {
#address-cells = <1>;
#size-cells = <0>;
led@0 {
reg = <0>;
color = <LED_COLOR_ID_GREEN>;
function = LED_FUNCTION_LAN;
default-state = "keep";
};
led@1 {
reg = <1>;
color = <LED_COLOR_ID_AMBER>;
function = LED_FUNCTION_LAN;
default-state = "keep";
};
};
};
port@5 {
reg = <5>;
label = "wan";
phy-handle = <&qca8337_4>;
phy-mode = "internal";
leds {
#address-cells = <1>;
#size-cells = <0>;
led@0 {
reg = <0>;
color = <LED_COLOR_ID_GREEN>;
function = LED_FUNCTION_WAN;
default-state = "keep";
};
led@1 {
reg = <1>;
color = <LED_COLOR_ID_AMBER>;
function = LED_FUNCTION_WAN;
default-state = "keep";
};
};
};
port@6 {
reg = <6>;
label = "cpu";
phy-mode = "sgmii";
ethernet = <&dp2>;
qca,sgmii-enable-pll;
fixed-link {
speed = <1000>;
full-duplex;
};
};
};
mdio {
#address-cells = <1>;
#size-cells = <0>;
// QCA8337 Phy0 -> LAN1
qca8337_0: ethernet-phy@0 {
reg = <0>;
};
// QCA8337 Phy1 -> LAN2
qca8337_1: ethernet-phy@1 {
reg = <1>;
};
// QCA8337 Phy2 -> LAN3
qca8337_2: ethernet-phy@2 {
reg = <2>;
};
// QCA8337 Phy3 -> LAN4
qca8337_3: ethernet-phy@3 {
reg = <3>;
};
// QCA8337 Phy4 -> WAN
qca8337_4: ethernet-phy@4 {
reg = <4>;
};
};
};
};
&usbphy0 {
status = "okay";
vdd-supply = <&regulator_fixed_5p0>;
};
&usb {
status = "okay";
vbus-supply = <&regulator_fixed_5p0>;
};
&usb_dwc {
address-cells = <1>;
#size-cells = <0>;
dr_mode = "host";
usb_port1: port@1 {
reg = <1>;
#trigger-source-cells = <0>;
};
};
&pcie0_phy {
status = "okay";
};
&pcie0 {
status = "okay";
perst-gpios = <&tlmm 15 GPIO_ACTIVE_LOW>;
bridge@0,0 {
reg = <0x00000000 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
ranges;
wifi@1,0 {
status = "okay";
/* QCN9074: ath11k lacks DT compatible for PCI cards */
compatible = "pci17cb,1104";
reg = <0x00010000 0 0 0 0>;
qcom,ath11k-calibration-variant = "Linksys-MR5500";
};
};
};
&q6v5_wcss {
status = "okay";
memory-region = <&q6_mem_regions>;
firmware-name = "ath11k/IPQ5018/hw1.0/q6_fw.mdt",
"ath11k/IPQ5018/hw1.0/m3_fw.mdt";
// IPQ5018
q6_wcss_pd1: pd-1 {
firmware-name = "ath11k/IPQ5018/hw1.0/q6_fw.mdt";
resets =
<&gcc GCC_WCSSAON_RESET>,
<&gcc GCC_WCSS_BCR>,
<&gcc GCC_CE_BCR>;
reset-names =
"wcss_aon_reset",
"wcss_reset",
"ce_reset";
clocks =
<&gcc GCC_WCSS_AHB_S_CLK>,
<&gcc GCC_WCSS_ACMT_CLK>,
<&gcc GCC_WCSS_AXI_M_CLK>;
clock-names =
"gcc_wcss_ahb_s_clk",
"gcc_wcss_acmt_clk",
"gcc_wcss_axi_m_clk";
interrupts-extended =
<&wcss_smp2p_in 8 0>,
<&wcss_smp2p_in 9 0>,
<&wcss_smp2p_in 12 0>,
<&wcss_smp2p_in 11 0>;
interrupt-names =
"fatal",
"ready",
"spawn-ack",
"stop-ack";
qcom,smem-states =
<&wcss_smp2p_out 8>,
<&wcss_smp2p_out 9>,
<&wcss_smp2p_out 10>;
qcom,smem-state-names =
"shutdown",
"stop",
"spawn";
};
};
&wifi0 {
// IPQ5018
qcom,rproc = <&q6_wcss_pd1>;
qcom,ath11k-calibration-variant = "Linksys-MR5500";
qcom,ath11k-fw-memory-mode = <2>;
qcom,bdf-addr = <0x4c400000>;
status = "okay";
};

11
target/linux/qualcommax/image/ipq50xx.mk
View File

@ -11,6 +11,17 @@ define Device/linksys_ipq50xx_mx_base
IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | linksys-image type=$$$$(DEVICE_MODEL)
endef
define Device/linksys_mr5500
$(call Device/linksys_ipq50xx_mx_base)
DEVICE_MODEL := MR5500
DEVICE_DTS_CONFIG := config@mp03.1
DEVICE_PACKAGES := kmod-ath11k-pci \
ath11k-firmware-qcn9074 \
ipq-wifi-linksys_mr5500 \
kmod-usb-ledtrig-usbport
endef
TARGET_DEVICES += linksys_mr5500
define Device/linksys_mx2000
$(call Device/linksys_ipq50xx_mx_base)
DEVICE_MODEL := MX2000

28
target/linux/qualcommax/ipq50xx/base-files/etc/board.d/01_leds Normal file
View File

@ -0,0 +1,28 @@
#
# Copyright (C) 2015 OpenWrt.org
#
. /lib/functions/uci-defaults.sh
board_config_update
board=$(board_name)
case "$board" in
linksys,mr5500)
ucidef_set_led_netdev "lan1-port-link" "LAN1-PORT-LINK" "qca8k-0.0:00:green:lan" "lan1" "link_10 link_100 link_1000"
ucidef_set_led_netdev "lan1-port-activity" "LAN1-PORT-ACTIVITY" "qca8k-0.0:00:amber:lan" "lan1" "tx rx"
ucidef_set_led_netdev "lan2-port-link" "LAN2-PORT-LINK" "qca8k-0.0:01:green:lan" "lan2" "link_10 link_100 link_1000"
ucidef_set_led_netdev "lan2-port-activity" "LAN2-PORT-ACTIVITY" "qca8k-0.0:01:amber:lan" "lan2" "tx rx"
ucidef_set_led_netdev "lan3-port-link" "LAN3-PORT-LINK" "qca8k-0.0:02:green:lan" "lan3" "link_10 link_100 link_1000"
ucidef_set_led_netdev "lan3-port-activity" "LAN3-PORT-ACTIVITY" "qca8k-0.0:02:amber:lan" "lan3" "tx rx"
ucidef_set_led_netdev "lan4-port-link" "LAN4-PORT-LINK" "qca8k-0.0:03:green:lan" "lan4" "link_10 link_100 link_1000"
ucidef_set_led_netdev "lan4-port-activity" "LAN4-PORT-ACTIVITY" "qca8k-0.0:03:amber:lan" "lan4" "tx rx"
ucidef_set_led_netdev "wan-port-link" "WAN-PORT-LINK" "qca8k-0.0:04:green:wan" "wan" "link_10 link_100 link_1000"
ucidef_set_led_netdev "wan-port-activity" "WAN-PORT-ACTIVITY" "qca8k-0.0:04:amber:wan" "wan" "tx rx"
;;
esac
board_config_flush
exit 0

3
target/linux/qualcommax/ipq50xx/base-files/etc/board.d/02_network
View File

@ -7,6 +7,9 @@ ipq50xx_setup_interfaces()
{
local board="$1"
case $board in
linksys,mr5500)
ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4" "wan"
;;
linksys,mx2000|\
linksys,mx5500|\
linksys,spnmx56)

2
target/linux/qualcommax/ipq50xx/base-files/etc/hotplug.d/firmware/11-ath11k-caldata
View File

@ -9,6 +9,7 @@ board=$(board_name)
case "$FIRMWARE" in
"ath11k/IPQ5018/hw1.0/cal-ahb-c000000.wifi.bin")
case "$board" in
linksys,mr5500|\
linksys,mx2000|\
linksys,mx5500|\
linksys,spnmx56)
@ -33,6 +34,7 @@ case "$FIRMWARE" in
;;
"ath11k/QCN9074/hw1.0/cal-pci-0001:01:00.0.bin")
case "$board" in
linksys,mr5500|\
linksys,mx5500|\
linksys,spnmx56)
caldata_extract "0:ART" 0x26800 0x20000

1
target/linux/qualcommax/ipq50xx/base-files/etc/init.d/bootcount
View File

@ -4,6 +4,7 @@ START=99
boot() {
case $(board_name) in
linksys,mr5500|\
linksys,mx2000|\
linksys,mx5500|\
linksys,spnmx56)

1
target/linux/qualcommax/ipq50xx/base-files/lib/upgrade/platform.sh
View File

@ -71,6 +71,7 @@ platform_check_image() {
platform_do_upgrade() {
case "$(board_name)" in
linksys,mr5500|\
linksys,mx2000|\
linksys,mx5500|\
linksys,spnmx56)

1
target/linux/qualcommax/ipq50xx/config-default
View File

@ -7,6 +7,7 @@ CONFIG_MTD_SPI_NAND=y
CONFIG_NET_DEVLINK=y
CONFIG_NET_DSA=y
CONFIG_NET_DSA_QCA8K=y
CONFIG_NET_DSA_QCA8K_LEDS_SUPPORT=y
CONFIG_NET_DSA_TAG_QCA=y
CONFIG_PHYLINK=y
CONFIG_PHY_QCOM_M31_USB=y