DT bindings:
- Convert lattice,ice40-fpga-mgr, apm,xgene-storm-dma, brcm,sr-thermal,
amazon,al-thermal, brcm,ocotp, mt8173-mdp, Actions Owl SPS, Marvell
AP80x System Controller, Marvell CP110 System Controller,
cznic,moxtet, and apm,xgene-slimpro-mbox to DT schema format
- Add i.MX95 fsl,irqsteer, MT8365 Mali Bifrost GPU, Anvo ANV32C81W
EEPROM, and Microchip pic64gx PLIC
- Add missing LGE, AMD Seattle, and APM X-Gene SoC platform compatibles
- Updates to brcm,bcm2836-l1-intc, brcm,bcm2835-hvs, and bcm2711-hdmi
bindings to fix warnings on BCM2712 platforms
- Drop obsolete db8500-thermal.txt
- Treewide clean-up of extra blank lines and inconsistent quoting
- Ensure all .dtbo targets are applied to a base .dtb
- Speed up dt_binding_check by skipping running validation on empty
examples
DT core:
- Add of_machine_device_match() and of_machine_get_match_data() helpers
and convert users treewide
- Fix bounds checking of address properties in FDT code. Rework the code
to have a single implementation of the bounds checks.
- Rework of_irq_init() to ignore any implicit interrupt-parent (i.e. in
a parent node) on nodes without an interrupt. This matches the spec
description and fixes some RISC-V platforms.
- Avoid a spurious message on overlay removal
- Skip DT kunit tests on RISCV+ACPI
-----BEGIN PGP SIGNATURE-----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=ZM/+
-----END PGP SIGNATURE-----
Merge tag 'devicetree-for-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
"DT bindings:
- Convert lattice,ice40-fpga-mgr, apm,xgene-storm-dma,
brcm,sr-thermal, amazon,al-thermal, brcm,ocotp, mt8173-mdp, Actions
Owl SPS, Marvell AP80x System Controller, Marvell CP110 System
Controller, cznic,moxtet, and apm,xgene-slimpro-mbox to DT schema
format
- Add i.MX95 fsl,irqsteer, MT8365 Mali Bifrost GPU, Anvo ANV32C81W
EEPROM, and Microchip pic64gx PLIC
- Add missing LGE, AMD Seattle, and APM X-Gene SoC platform
compatibles
- Updates to brcm,bcm2836-l1-intc, brcm,bcm2835-hvs, and bcm2711-hdmi
bindings to fix warnings on BCM2712 platforms
- Drop obsolete db8500-thermal.txt
- Treewide clean-up of extra blank lines and inconsistent quoting
- Ensure all .dtbo targets are applied to a base .dtb
- Speed up dt_binding_check by skipping running validation on empty
examples
DT core:
- Add of_machine_device_match() and of_machine_get_match_data()
helpers and convert users treewide
- Fix bounds checking of address properties in FDT code. Rework the
code to have a single implementation of the bounds checks.
- Rework of_irq_init() to ignore any implicit interrupt-parent (i.e.
in a parent node) on nodes without an interrupt. This matches the
spec description and fixes some RISC-V platforms.
- Avoid a spurious message on overlay removal
- Skip DT kunit tests on RISCV+ACPI"
* tag 'devicetree-for-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (55 commits)
dt-bindings: kbuild: Skip validating empty examples
dt-bindings: interrupt-controller: brcm,bcm2836-l1-intc: Drop interrupt-controller requirement
dt-bindings: display: Fix brcm,bcm2835-hvs bindings for BCM2712
dt-bindings: display: bcm2711-hdmi: Add interrupt details for BCM2712
of: Skip devicetree kunit tests when RISCV+ACPI doesn't populate root node
soc: tegra: Simplify with of_machine_device_match()
soc: qcom: ubwc: Simplify with of_machine_get_match_data()
powercap: dtpm: Simplify with of_machine_get_match_data()
platform: surface: Simplify with of_machine_get_match_data()
irqchip/atmel-aic: Simplify with of_machine_get_match_data()
firmware: qcom: scm: Simplify with of_machine_device_match()
cpuidle: big_little: Simplify with of_machine_device_match()
cpufreq: sun50i: Simplify with of_machine_device_match()
cpufreq: mediatek: Simplify with of_machine_get_match_data()
cpufreq: dt-platdev: Simplify with of_machine_get_match_data()
of: Add wrappers to match root node with OF device ID tables
dt-bindings: eeprom: at25: Add Anvo ANV32C81W
of/reserved_mem: Simplify the logic of __reserved_mem_alloc_size()
of/reserved_mem: Simplify the logic of fdt_scan_reserved_mem_reg_nodes()
of/reserved_mem: Simplify the logic of __reserved_mem_reserve_reg()
...
- Remove one variant of PCI/MSI management as all users have been
converted to use per device domains. That reduces the variants to two:
The modern and the real archaic legacy variant, which keeps the usual
suspects in the museum category alive.
- Rework the platform MSI device ID detection mechanism in the ARM GIC
world to address resource leaks, duplicated code and other details. This
requires a corresponding preparatory step in the PCI/iproc driver.
- Trivial core code cleanups
-----BEGIN PGP SIGNATURE-----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=VAtQ
-----END PGP SIGNATURE-----
Merge tag 'irq-msi-2025-11-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull MSI updates from Thomas Gleixner:
"Updates for [PCI] MSI related code:
- Remove one variant of PCI/MSI management as all users have been
converted to use per device domains. That reduces the variants to
two:
The modern and the real archaic legacy variant, which keeps the
usual suspects in the museum category alive.
- Rework the platform MSI device ID detection mechanism in the ARM
GIC world to address resource leaks, duplicated code and other
details. This requires a corresponding preparatory step in the
PCI/iproc driver.
- Trivial core code cleanups"
* tag 'irq-msi-2025-11-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/gic-its: Rework platform MSI deviceID detection
PCI: iproc: Implement MSI controller node detection with of_msi_xlate()
genirq/msi: Slightly simplify msi_domain_alloc()
PCI/MSI: Delete pci_msi_create_irq_domain()
- Support for a couple of new ARM64 and RISCV SoC variants and their
magic interrupt controllers which either can reuse existing code or
require quirks due to a botched hardware implementation.
- More section mismatch fixes.
- The usual cleanups and fixes all over the place.
-----BEGIN PGP SIGNATURE-----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=kdyt
-----END PGP SIGNATURE-----
Merge tag 'irq-drivers-2025-11-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq driver updates from Thomas Gleixner:
"Boring updates for interrupt drivers:
- Support for a couple of new ARM64 and RISCV SoC variants and their
magic interrupt controllers which either can reuse existing code or
require quirks due to a botched hardware implementation
- More section mismatch fixes
- The usual cleanups and fixes all over the place"
* tag 'irq-drivers-2025-11-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (32 commits)
irqchip/meson-gpio: Add support for Amlogic S6 S7 and S7D SoCs
dt-bindings: interrupt-controller: Add support for Amlogic S6 S7 and S7D SoCs
dt-bindings: interrupt-controller: aspeed,ast2700: Correct #interrupt-cells and interrupts count
irqchip/aclint-sswi: Add Nuclei UX900 support
dt-bindings: interrupt-controller: Add Anlogic DR1V90 ACLINT SSWI
dt-bindings: interrupt-controller: Add Anlogic DR1V90 ACLINT MSWI
dt-bindings: interrupt-controller: Add Anlogic DR1V90 PLIC
irqchip/irq-bcm7038-l1: Remove unused reg_mask_status()
irqchip/sifive-plic: Fix call to __plic_toggle() in M-Mode code path
irqchip/sifive-plic: Add support for UltraRISC DP1000 PLIC
irqchip/sifive-plic: Cache the interrupt enable state
dt-bindings: interrupt-controller: Add UltraRISC DP1000 PLIC
dt-bindings: vendor-prefixes: Add UltraRISC
irqchip/qcom-irq-combiner: Rename driver structure
irqchip/riscv-imsic: Inline imsic_vector_from_local_id()
irqchip/riscv-imsic: Embed the vector array in lpriv
irqchip/riscv-imsic: Remove redundant irq_data lookups
irqchip/ts4800: Drop unused module alias
irqchip/mvebu-pic: Drop unused module alias
irqchip/meson-gpio: Drop unused module alias
...
- Rework of the Per Processor Interrupt (PPI) management on ARM[64].
PPI support was built under the assumption that the systems are
homogenous so that the same CPU local device types are connected to
them. That's unfortunately wishful thinking and created horrible
workarounds.
This rework provides affinity management for PPIs so that they can be
individually configured in the firmware tables and mops up the related
drivers all over the place.
- Prevent CPUSET/isolation changes to arbitrarily affine interrupt
threads to random CPUs, which ignores user or driver settings.
- Plug a harmless race in the interrupt affinity proc interface, which
allows to see a half updated mask
- Adjust the priority of secondary interrupt threads on RT, so that the
combination of primary and secondary thread emulates the hardware
interrupt plus thread scenario. Having them at the same priority can
cause starvation issues in some drivers.
-----BEGIN PGP SIGNATURE-----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=zrA1
-----END PGP SIGNATURE-----
Merge tag 'irq-core-2025-11-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq core updates from Thomas Gleixner:
"Updates for the interrupt core and treewide cleanups:
- Rework of the Per Processor Interrupt (PPI) management on ARM[64]
PPI support was built under the assumption that the systems are
homogenous so that the same CPU local device types are connected to
them. That's unfortunately wishful thinking and created horrible
workarounds.
This rework provides affinity management for PPIs so that they can
be individually configured in the firmware tables and mops up the
related drivers all over the place.
- Prevent CPUSET/isolation changes to arbitrarily affine interrupt
threads to random CPUs, which ignores user or driver settings.
- Plug a harmless race in the interrupt affinity proc interface,
which allows to see a half updated mask
- Adjust the priority of secondary interrupt threads on RT, so that
the combination of primary and secondary thread emulates the
hardware interrupt plus thread scenario. Having them at the same
priority can cause starvation issues in some drivers"
* tag 'irq-core-2025-11-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (33 commits)
genirq: Remove cpumask availability check on kthread affinity setting
genirq: Fix interrupt threads affinity vs. cpuset isolated partitions
genirq: Prevent early spurious wake-ups of interrupt threads
genirq: Use raw_spinlock_irq() in irq_set_affinity_notifier()
genirq/manage: Reduce priority of forced secondary interrupt handler
genirq/proc: Fix race in show_irq_affinity()
genirq: Fix percpu_devid irq affinity documentation
perf: arm_pmu: Kill last use of per-CPU cpu_armpmu pointer
irqdomain: Kill of_node_to_fwnode() helper
genirq: Kill irq_{g,s}et_percpu_devid_partition()
irqchip: Kill irq-partition-percpu
irqchip/apple-aic: Drop support for custom PMU irq partitions
irqchip/gic-v3: Drop support for custom PPI partitions
coresight: trbe: Request specific affinities for per CPU interrupts
perf: arm_spe_pmu: Request specific affinities for per CPU interrupts
perf: arm_pmu: Request specific affinities for per CPU NMIs/interrupts
genirq: Add request_percpu_irq_affinity() helper
genirq: Allow per-cpu interrupt sharing for non-overlapping affinities
genirq: Update request_percpu_nmi() to take an affinity
genirq: Add affinity to percpu_devid interrupt requests
...
Replace open-coded getting root OF node, matching against it and getting
the match data with new of_machine_get_match_data() helper.
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patch.msgid.link/20251112-b4-of-match-matchine-data-v2-7-d46b72003fd6@linaro.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Current code retrieving platform devices MSI devID in the GIC ITS MSI
parent helpers suffers from some minor issues:
- It leaks a struct device_node reference
- It is duplicated between GICv3 and GICv5 for no good reason
- It does not use the OF phandle iterator code that simplifies
the msi-parent property parsing
Consolidate GIC v3 and v5 deviceID retrieval in a function that addresses
the full set of issues in one go by merging GIC v3 and v5 code and
converting the msi-parent parsing loop to the more modern OF phandle
iterator API, fixing the struct device_node reference leak in the process.
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://patch.msgid.link/20251021124103.198419-6-lpieralisi@kernel.org
The irq_domain_free_irqs() helper requires that the irq_domain_ops->free
callback is implemented. Otherwise, the kernel reports the warning message
"NULL pointer, cannot free irq" when irq_dispose_mapping() is invoked to
release the per-HART local interrupts.
Set irq_domain_ops->free to irq_domain_free_irqs_top() to cure that.
Fixes: 832f15f426 ("RISC-V: Treat IPIs as normal Linux IRQs")
Signed-off-by: Nick Hu <nick.hu@sifive.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://patch.msgid.link/20251114-rv-intc-fix-v1-1-a3edd1c1a868@sifive.com
The Amlogic S6/S7/S7D SoCs support GPIO interrupt lines:
S6 IRQ Number:
- 99:98 2 pins on bank CC
- 97 1 pin on bank TESTN
- 96:81 16 pins on bank A
- 80:65 16 pins on bank Z
- 64:45 20 pins on bank X
- 44:37 8 pins on bank H offs H1
- 36:32 5 pins on bank F
- 31:25 7 pins on bank D
- 24:22 3 pins on bank E
- 21:14 8 pins on bank C
- 13:0 14 pins on bank B
S7 IRQ Number:
- 83:82 2 pins on bank CC
- 81 1 pin on bank TESTN
- 80:68 13 pins on bank Z
- 67:48 20 pins on bank X
- 47:36 12 pins on bank H
- 35:24 12 pins on bank D
- 23:22 2 pins on bank E
- 21:14 8 pins on bank C
- 13:0 14 pins on bank B
S7D IRQ Number:
- 83:82 2 pins on bank CC
- 81:75 7 pins on bank DV
- 74 1 pin on bank TESTN
- 73:61 13 pins on bank Z
- 60:41 20 pins on bank X
- 40:29 12 pins on bank H
- 28:24 5 pins on bank D
- 23:22 2 pins on bank E
- 21:14 8 pins on bank C
- 13:0 14 pins on bank B
Add the required compatibles and interrupt count initializers.
Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20251105-irqchip-gpio-s6-s7-s7d-v1-2-b4d1fe4781c1@amlogic.com
reg_mask_status() is not referenced anywhere leading to W=1 warning:
irq-bcm7038-l1.c:85:28: error: unused function 'reg_mask_status' [-Werror,-Wunused-function]
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20251106155200.337399-2-krzysztof.kozlowski@linaro.org
The code path for M-Mode linux that disables interrupts for other contexts
was missed when refactoring __plic_toggle().
Since the new version caches updates to the state for the primary context,
its use in this codepath is no longer desireable even if it could be made
correct.
Replace the calls to __plic_toggle() with a loop that simply disables all
of the interrupts in groups of 32 with a direct mmio write.
Fixes: 14ff9e54dd ("irqchip/sifive-plic: Cache the interrupt enable state")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Charles Mirabile <cmirabil@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://patch.msgid.link/20251103161813.2437427-1-cmirabil@redhat.com
Closes: https://lore.kernel.org/oe-kbuild-all/202510271316.AQM7gCCy-lkp@intel.com/
This code is now completely unused, and nobody will ever miss it.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Will Deacon <will@kernel.org>
Link: https://patch.msgid.link/20251020122944.3074811-24-maz@kernel.org
Similarly to what has been done for GICv3, drop the irq partitioning
support from the AIC driver, effectively merging the two per-cpu interrupts
for the PMU.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Will Deacon <will@kernel.org>
Reviewed-by: Sven Peter <sven@kernel.org>
Link: https://patch.msgid.link/20251020122944.3074811-23-maz@kernel.org
The only thing getting in the way of correctly handling PPIs the way they
were intended is the GICv3 hack that deals with PPI partitions.
Remove that code, allowing the common code to kick in.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Will Deacon <will@kernel.org>
Link: https://patch.msgid.link/20251020122944.3074811-22-maz@kernel.org
It so appears that handle_percpu_devid_irq() is extremely similar to
handle_percpu_devid_fasteoi_nmi(), and that the differences do no justify
the horrid machinery in the GICv3 driver to handle the flow handler switch.
Stick with the standard flow handler, even for NMIs.
Suggested-by: Will Deacon <will@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Will Deacon <will@kernel.org>
Link: https://patch.msgid.link/20251020122944.3074811-11-maz@kernel.org
Plug the new .get_fwspec_info() callback into the Apple AIC driver, using
some of the existing FIQ affinity handling infrastructure.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Will Deacon <will@kernel.org>
Acked-by: Sven Peter <sven@kernel.org>
Link: https://patch.msgid.link/20251020122944.3074811-7-maz@kernel.org
Plug the new .get_fwspec_info() callback into the GICv3 core driver, using
some of the existing PPI affinity handling infrastructure.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Will Deacon <will@kernel.org>
Link: https://patch.msgid.link/20251020122944.3074811-6-maz@kernel.org
Add a new compatible for the plic found in UltraRISC DP1000 with a quirk to
work around a known hardware bug with IRQ claiming in the UR-CP100 cores.
When claiming an interrupt on UR-CP100 cores, all other interrupts must be
disabled before the claim register is accessed to prevent incorrect
handling of the interrupt. This is a hardware bug in the CP100 core
implementation, not specific to the DP1000 SoC.
When the PLIC_QUIRK_CP100_CLAIM_REGISTER_ERRATUM flag is present, a
specialized handler (plic_handle_irq_cp100) disables all interrupts except
for the first pending one before reading the claim register, and then
restores the interrupts before further processing of the claimed interrupt
continues.
This implementation leverages the enable_save optimization, which maintains
the current interrupt enable state in memory, avoiding additional register
reads during the workaround.
The driver matches on "ultrarisc,cp100-plic" to apply the quirk to all
SoCs using UR-CP100 cores, regardless of the specific SoC implementation.
This has no impact on other platforms.
[ tglx: Condensed the code a bit, massaged change log and comments ]
Co-developed-by: Zhang Xincheng <zhangxincheng@ultrarisc.com>
Signed-off-by: Zhang Xincheng <zhangxincheng@ultrarisc.com>
Signed-off-by: Charles Mirabile <cmirabil@redhat.com>
Signed-off-by: Lucas Zampieri <lzampier@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Samuel Holland <samuel.holland@sifive.com>
Link: https://patch.msgid.link/20251024083647.475239-5-lzampier@redhat.com
Optimize the PLIC driver by maintaining the interrupt enable state in the
handler's enable_save array during normal operation rather than only during
suspend/resume. This eliminates the need to read enable registers during
suspend and makes the enable state immediately available for other
purposes.
Let __plic_toggle() update both the hardware registers and the cached
enable_save state atomically within the existing enable_lock protection.
That allows to remove the suspend-time enable register reading since
handler::enable_save now always reflects the current state.
[ tglx: Massaged change log ]
Signed-off-by: Charles Mirabile <cmirabil@redhat.com>
Signed-off-by: Lucas Zampieri <lzampier@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://patch.msgid.link/20251024083647.475239-4-lzampier@redhat.com
The "_probe" suffix of the driver structure name prevents modpost from
warning about section mismatches so replace it to catch any future
issues like the recently fixed probe function being incorrectly marked
as __init.
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
This function is only called from one place, which is in the interrupt
handling hot path. Inline it to improve code generation and to take
advantage of this_cpu operations. lpriv and imsic->base_domain can never be
NULL because irq_set_chained_handler() is called after they are allocated.
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reduce pointer chasing and the number of allocations by using a flexible
array member for the vector array instead of a separate allocation.
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
imsic_irq_set_affinity() already takes the irq_data pointer as a
parameter, so it is pointless to look it up again from the IRQ number.
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
The driver has never supported anything but OF probing so drop the
unused platform alias.
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
The driver has never supported anything but OF probing so drop the
unused platform alias.
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
The driver has never supported anything but OF probing so drop the
unused platform alias that was erroneously added by commit a947aa00ed
("irqchip/meson-gpio: Make it possible to build as a module").
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
There seems to be nothing preventing the Broadcom drivers from being
compile tested so enable that for wider build coverage.
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
The IRQCHIP_PLATFORM_DRIVER macros can be used to convert OF irqchip
drivers to platform drivers but currently reuse the OF init callback
prototype that only takes OF nodes as arguments. This forces drivers to
do reverse lookups of their struct devices during probe if they need
them for things like dev_printk() and device managed resources.
Half of the drivers doing reverse lookups also currently fail to release
the additional reference taken during the lookup, while other drivers
have had the reference leak plugged in various ways (e.g. using
non-intuitive cleanup constructs which still confuse static checkers).
Switch to using a probe callback that takes a platform device as its
first argument to simplify drivers and plug the remaining (mostly
benign) reference leaks.
Fixes: 32c6c05466 ("irqchip: Add Broadcom BCM2712 MSI-X interrupt controller")
Fixes: 70afdab904 ("irqchip: Add IMX MU MSI controller driver")
Fixes: a6199bb514 ("irqchip: Add Qualcomm MPM controller driver")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Changhuang Liang <changhuang.liang@starfivetech.com>
Drop some unnecessary brackets in platform_irqchip_probe() mistakenly
left by commit 9322d1915f ("irqchip: Plug a OF node reference leak in
platform_irqchip_probe()").
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Platform drivers can be probed after their init sections have been
discarded so the probe callback must not live in init.
Fixes: f20cc9b00c ("irqchip/qcom: Add IRQ combiner driver")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Platform drivers can be probed after their init sections have been
discarded so the irqchip init callback must not live in init.
Fixes: e4e5350361 ("irqchip: Add StarFive external interrupt controller")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Changhuang Liang <changhuang.liang@starfivetech.com>
Platform drivers can be probed after their init sections have been
discarded so the irqchip init callbacks must not live in init.
Fixes: d011c022ef ("irqchip/renesas-rzg2l: Add support for RZ/Five SoC")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Platform drivers can be probed after their init sections have been
discarded so the irqchip init callbacks must not live in init.
Fixes: 70afdab904 ("irqchip: Add IMX MU MSI controller driver")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Platform drivers can be probed after their init sections have been
discarded so the irqchip init callbacks must not live in init.
Fixes: 51d9db5c8f ("irqchip/irq-brcmstb-l2: Switch to IRQCHIP_PLATFORM_DRIVER")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Platform drivers can be probed after their init sections have been
discarded so the irqchip init callbacks must not live in init.
Fixes: 3ac268d5ed ("irqchip/irq-bcm7120-l2: Switch to IRQCHIP_PLATFORM_DRIVER")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Platform drivers can be probed after their init sections have been
discarded so the irqchip init callback must not live in init.
Fixes: c057c799e3 ("irqchip/irq-bcm7038-l1: Switch to IRQCHIP_PLATFORM_DRIVER")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Platform drivers can be probed after their init sections have been
discarded so the irqchip init callback must not live in init.
Fixes: 32c6c05466 ("irqchip: Add Broadcom BCM2712 MSI-X interrupt controller")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
The init callback must not decrement the reference count of the provided
irqchip OF node.
This should not cause any trouble currently, but if the driver ever
starts probe deferring it could lead to warnings about reference
underflow and saturation.
Fixes: 32c6c05466 ("irqchip: Add Broadcom BCM2712 MSI-X interrupt controller")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
According to the PLIC specification[1], global interrupt sources are
assigned small unsigned integer identifiers beginning at the value 1.
An interrupt ID of 0 is reserved to mean "no interrupt".
The current plic_irq_resume() and plic_irq_suspend() functions incorrectly
start the loop from index 0, which accesses the register space for the
reserved interrupt ID 0.
Change the loop to start from index 1, skipping the reserved
interrupt ID 0 as per the PLIC specification.
This prevents potential undefined behavior when accessing the reserved
register space during suspend/resume cycles.
Fixes: e80f0b6a2c ("irqchip/irq-sifive-plic: Add syscore callbacks for hibernation")
Co-developed-by: Jia Wang <wangjia@ultrarisc.com>
Signed-off-by: Jia Wang <wangjia@ultrarisc.com>
Co-developed-by: Charles Mirabile <cmirabil@redhat.com>
Signed-off-by: Charles Mirabile <cmirabil@redhat.com>
Signed-off-by: Lucas Zampieri <lzampier@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://github.com/riscv/riscv-plic-spec/releases/tag/1.0.0
of_iomap() doesn't return error pointers, it returns NULL. Fix the error
checking to check for NULL pointers.
Fixes: 86cd4301c2 ("irqchip/aspeed-scu-ic: Refactor driver to support variant-based initialization")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Second set of RISC-V updates for the v6.18 merge window, consisting
of:
- Support for the RISC-V-standardized RPMI interface.
RPMI is a platform management communication mechanism between OSes
running on application processors, and a remote platform management
processor. Similar to ARM SCMI, TI SCI, etc. This includes irqchip,
mailbox, and clk changes.
- Support for the RISC-V-standardized MPXY SBI extension.
MPXY is a RISC-V-specific standard implementing a shared memory
mailbox between S-mode operating systems (e.g., Linux) and M-mode
firmware (e.g., OpenSBI). It is part of this PR since one of its
use cases is to enable M-mode firmware to act as a single RPMI client
for all RPMI activity on a core (including S-mode RPMI activity).
Includes a mailbox driver.
- Some ACPI-related updates to enable the use of RPMI and MPXY.
- The addition of Linux-wide memcpy_{from,to}_le32() static inline
functions, for RPMI use.
- An ACPI Kconfig change to enable boot logos on any ACPI-using
architecture (including RISC-V)
- A RISC-V defconfig change to add GPIO keyboard and event device
support, for front panel shutdown or reboot buttons
This PR also includes a recent, one-line Kconfig patch from Geert to
keep non-RISC-V users from being asked about building the RPMI virtual
clock driver when !COMPILE_TEST. THere's nothing preventing
non-RISC-V SoCs from implementing RPMI, but until some users show up,
let's not annoy others with it.
-----BEGIN PGP SIGNATURE-----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=Ys1m
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-6.18-mw2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull more RISC-V updates from Paul Walmsley:
- Support for the RISC-V-standardized RPMI interface.
RPMI is a platform management communication mechanism between OSes
running on application processors, and a remote platform management
processor. Similar to ARM SCMI, TI SCI, etc. This includes irqchip,
mailbox, and clk changes.
- Support for the RISC-V-standardized MPXY SBI extension.
MPXY is a RISC-V-specific standard implementing a shared memory
mailbox between S-mode operating systems (e.g., Linux) and M-mode
firmware (e.g., OpenSBI). It is part of this PR since one of its use
cases is to enable M-mode firmware to act as a single RPMI client for
all RPMI activity on a core (including S-mode RPMI activity).
Includes a mailbox driver.
- Some ACPI-related updates to enable the use of RPMI and MPXY.
- The addition of Linux-wide memcpy_{from,to}_le32() static inline
functions, for RPMI use.
- An ACPI Kconfig change to enable boot logos on any ACPI-using
architecture (including RISC-V)
- A RISC-V defconfig change to add GPIO keyboard and event device
support, for front panel shutdown or reboot buttons
* tag 'riscv-for-linus-6.18-mw2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (26 commits)
clk: COMMON_CLK_RPMI should depend on RISCV
ACPI: support BGRT table on RISC-V
MAINTAINERS: Add entry for RISC-V RPMI and MPXY drivers
RISC-V: Enable GPIO keyboard and event device in RV64 defconfig
irqchip/riscv-rpmi-sysmsi: Add ACPI support
mailbox/riscv-sbi-mpxy: Add ACPI support
irqchip/irq-riscv-imsic-early: Export imsic_acpi_get_fwnode()
ACPI: RISC-V: Add RPMI System MSI to GSI mapping
ACPI: RISC-V: Add support to update gsi range
ACPI: RISC-V: Create interrupt controller list in sorted order
ACPI: scan: Update honor list for RPMI System MSI
ACPI: Add support for nargs_prop in acpi_fwnode_get_reference_args()
ACPI: property: Refactor acpi_fwnode_get_reference_args() to support nargs_prop
irqchip: Add driver for the RPMI system MSI service group
dt-bindings: Add RPMI system MSI interrupt controller bindings
dt-bindings: Add RPMI system MSI message proxy bindings
clk: Add clock driver for the RISC-V RPMI clock service group
dt-bindings: clock: Add RPMI clock service controller bindings
dt-bindings: clock: Add RPMI clock service message proxy bindings
mailbox: Add RISC-V SBI message proxy (MPXY) based mailbox driver
...
* Add support for host userspace mapping of guest_memfd-backed memory for VM
types that do NOT use support KVM_MEMORY_ATTRIBUTE_PRIVATE (which isn't
precisely the same thing as CoCo VMs, since x86's SEV-MEM and SEV-ES have
no way to detect private vs. shared).
This lays the groundwork for removal of guest memory from the kernel direct
map, as well as for limited mmap() for guest_memfd-backed memory.
For more information see:
* a6ad54137a ("Merge branch 'guest-memfd-mmap' into HEAD", 2025-08-27)
* https://github.com/firecracker-microvm/firecracker/tree/feature/secret-hiding
(guest_memfd in Firecracker)
* https://lore.kernel.org/all/20250221160728.1584559-1-roypat@amazon.co.uk/
(direct map removal)
* https://lore.kernel.org/all/20250328153133.3504118-1-tabba@google.com/
(mmap support)
ARM:
* Add support for FF-A 1.2 as the secure memory conduit for pKVM,
allowing more registers to be used as part of the message payload.
* Change the way pKVM allocates its VM handles, making sure that the
privileged hypervisor is never tricked into using uninitialised
data.
* Speed up MMIO range registration by avoiding unnecessary RCU
synchronisation, which results in VMs starting much quicker.
* Add the dump of the instruction stream when panic-ing in the EL2
payload, just like the rest of the kernel has always done. This will
hopefully help debugging non-VHE setups.
* Add 52bit PA support to the stage-1 page-table walker, and make use
of it to populate the fault level reported to the guest on failing
to translate a stage-1 walk.
* Add NV support to the GICv3-on-GICv5 emulation code, ensuring
feature parity for guests, irrespective of the host platform.
* Fix some really ugly architecture problems when dealing with debug
in a nested VM. This has some bad performance impacts, but is at
least correct.
* Add enough infrastructure to be able to disable EL2 features and
give effective values to the EL2 control registers. This then allows
a bunch of features to be turned off, which helps cross-host
migration.
* Large rework of the selftest infrastructure to allow most tests to
transparently run at EL2. This is the first step towards enabling
NV testing.
* Various fixes and improvements all over the map, including one BE
fix, just in time for the removal of the feature.
LoongArch:
* Detect page table walk feature on new hardware
* Add sign extension with kernel MMIO/IOCSR emulation
* Improve in-kernel IPI emulation
* Improve in-kernel PCH-PIC emulation
* Move kvm_iocsr tracepoint out of generic code
RISC-V:
* Added SBI FWFT extension for Guest/VM with misaligned delegation and
pointer masking PMLEN features
* Added ONE_REG interface for SBI FWFT extension
* Added Zicbop and bfloat16 extensions for Guest/VM
* Enabled more common KVM selftests for RISC-V
* Added SBI v3.0 PMU enhancements in KVM and perf driver
s390:
* Improve interrupt cpu for wakeup, in particular the heuristic to decide
which vCPU to deliver a floating interrupt to.
* Clear the PTE when discarding a swapped page because of CMMA; this
bug was introduced in 6.16 when refactoring gmap code.
x86 selftests:
* Add #DE coverage in the fastops test (the only exception that's guest-
triggerable in fastop-emulated instructions).
* Fix PMU selftests errors encountered on Granite Rapids (GNR), Sierra
Forest (SRF) and Clearwater Forest (CWF).
* Minor cleanups and improvements
x86 (guest side):
* For the legacy PCI hole (memory between TOLUD and 4GiB) to UC when
overriding guest MTRR for TDX/SNP to fix an issue where ACPI auto-mapping
could map devices as WB and prevent the device drivers from mapping their
devices with UC/UC-.
* Make kvm_async_pf_task_wake() a local static helper and remove its
export.
* Use native qspinlocks when running in a VM with dedicated vCPU=>pCPU
bindings even when PV_UNHALT is unsupported.
Generic:
* Remove a redundant __GFP_NOWARN from kvm_setup_async_pf() as __GFP_NOWARN is
now included in GFP_NOWAIT.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmjcGSkUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroPSPAgAnJDswU4fZ5YdJr6jGzsbSQ6utlIV
FeEltLKQIM7Aq/uvL6PLN5Kx1Pb/d9r9ag39mDT6lq9fOfJdOLjJr2SBXPTCsrPS
6hyNL1mlgo5qzs54T8dkMbQThlSgA4zaehsc0zl8vnwil6ygoAdrtTHqZm6V0hu/
F/sVlikCsLix1hC0KtzwscyWYcjWtXfVoi9eU5WY6ALpQaVXfRUtwyOhGDkldr+m
i3iDiGiLAZ5Iu3igUCIOEzSSQY0FgLJpzbwJAeUxIvomDkHGJLaR14ijvM+NkRZi
FBo2CLbjrwXb56Rbh2ABcq0CGJ3EiU3L+CC34UaRLzbtl/2BtpetkC3irA==
=fyov
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
"This excludes the bulk of the x86 changes, which I will send
separately. They have two not complex but relatively unusual conflicts
so I will wait for other dust to settle.
guest_memfd:
- Add support for host userspace mapping of guest_memfd-backed memory
for VM types that do NOT use support KVM_MEMORY_ATTRIBUTE_PRIVATE
(which isn't precisely the same thing as CoCo VMs, since x86's
SEV-MEM and SEV-ES have no way to detect private vs. shared).
This lays the groundwork for removal of guest memory from the
kernel direct map, as well as for limited mmap() for
guest_memfd-backed memory.
For more information see:
- commit a6ad54137a ("Merge branch 'guest-memfd-mmap' into HEAD")
- guest_memfd in Firecracker:
https://github.com/firecracker-microvm/firecracker/tree/feature/secret-hiding
- direct map removal:
https://lore.kernel.org/all/20250221160728.1584559-1-roypat@amazon.co.uk/
- mmap support:
https://lore.kernel.org/all/20250328153133.3504118-1-tabba@google.com/
ARM:
- Add support for FF-A 1.2 as the secure memory conduit for pKVM,
allowing more registers to be used as part of the message payload.
- Change the way pKVM allocates its VM handles, making sure that the
privileged hypervisor is never tricked into using uninitialised
data.
- Speed up MMIO range registration by avoiding unnecessary RCU
synchronisation, which results in VMs starting much quicker.
- Add the dump of the instruction stream when panic-ing in the EL2
payload, just like the rest of the kernel has always done. This
will hopefully help debugging non-VHE setups.
- Add 52bit PA support to the stage-1 page-table walker, and make use
of it to populate the fault level reported to the guest on failing
to translate a stage-1 walk.
- Add NV support to the GICv3-on-GICv5 emulation code, ensuring
feature parity for guests, irrespective of the host platform.
- Fix some really ugly architecture problems when dealing with debug
in a nested VM. This has some bad performance impacts, but is at
least correct.
- Add enough infrastructure to be able to disable EL2 features and
give effective values to the EL2 control registers. This then
allows a bunch of features to be turned off, which helps cross-host
migration.
- Large rework of the selftest infrastructure to allow most tests to
transparently run at EL2. This is the first step towards enabling
NV testing.
- Various fixes and improvements all over the map, including one BE
fix, just in time for the removal of the feature.
LoongArch:
- Detect page table walk feature on new hardware
- Add sign extension with kernel MMIO/IOCSR emulation
- Improve in-kernel IPI emulation
- Improve in-kernel PCH-PIC emulation
- Move kvm_iocsr tracepoint out of generic code
RISC-V:
- Added SBI FWFT extension for Guest/VM with misaligned delegation
and pointer masking PMLEN features
- Added ONE_REG interface for SBI FWFT extension
- Added Zicbop and bfloat16 extensions for Guest/VM
- Enabled more common KVM selftests for RISC-V
- Added SBI v3.0 PMU enhancements in KVM and perf driver
s390:
- Improve interrupt cpu for wakeup, in particular the heuristic to
decide which vCPU to deliver a floating interrupt to.
- Clear the PTE when discarding a swapped page because of CMMA; this
bug was introduced in 6.16 when refactoring gmap code.
x86 selftests:
- Add #DE coverage in the fastops test (the only exception that's
guest- triggerable in fastop-emulated instructions).
- Fix PMU selftests errors encountered on Granite Rapids (GNR),
Sierra Forest (SRF) and Clearwater Forest (CWF).
- Minor cleanups and improvements
x86 (guest side):
- For the legacy PCI hole (memory between TOLUD and 4GiB) to UC when
overriding guest MTRR for TDX/SNP to fix an issue where ACPI
auto-mapping could map devices as WB and prevent the device drivers
from mapping their devices with UC/UC-.
- Make kvm_async_pf_task_wake() a local static helper and remove its
export.
- Use native qspinlocks when running in a VM with dedicated
vCPU=>pCPU bindings even when PV_UNHALT is unsupported.
Generic:
- Remove a redundant __GFP_NOWARN from kvm_setup_async_pf() as
__GFP_NOWARN is now included in GFP_NOWAIT.
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (178 commits)
KVM: s390: Fix to clear PTE when discarding a swapped page
KVM: arm64: selftests: Cover ID_AA64ISAR3_EL1 in set_id_regs
KVM: arm64: selftests: Remove a duplicate register listing in set_id_regs
KVM: arm64: selftests: Cope with arch silliness in EL2 selftest
KVM: arm64: selftests: Add basic test for running in VHE EL2
KVM: arm64: selftests: Enable EL2 by default
KVM: arm64: selftests: Initialize HCR_EL2
KVM: arm64: selftests: Use the vCPU attr for setting nr of PMU counters
KVM: arm64: selftests: Use hyp timer IRQs when test runs at EL2
KVM: arm64: selftests: Select SMCCC conduit based on current EL
KVM: arm64: selftests: Provide helper for getting default vCPU target
KVM: arm64: selftests: Alias EL1 registers to EL2 counterparts
KVM: arm64: selftests: Create a VGICv3 for 'default' VMs
KVM: arm64: selftests: Add unsanitised helpers for VGICv3 creation
KVM: arm64: selftests: Add helper to check for VGICv3 support
KVM: arm64: selftests: Initialize VGICv3 only once
KVM: arm64: selftests: Provide kvm_arch_vm_post_create() in library code
KVM: selftests: Add ex_str() to print human friendly name of exception vectors
selftests/kvm: remove stale TODO in xapic_state_test
KVM: selftests: Handle Intel Atom errata that leads to PMU event overcount
...
DT core:
- Update dtc to upstream version v1.7.2-35-g52f07dcca47c
- Add stub for of_get_next_child_with_prefix()
- Convert of_msi_map_id() callers to of_msi_xlate()
DT bindings:
- Convert Megachips stdpxxxx-ge-b850v3-fw DP bridges, NVIDIA Tegra GPUs,
SUN Sparc RNG, aspeed,ast2400-sdram-edac, Marvell arm32 SoCs, Marvell
Berlin SoCs, apm,xgene-edac, marvell,armada-ap806-thermal,
marvell,armada370-thermal, marvell,armada-3700-wdt, nuvoton,npcm-wdt,
brcm,iproc-flexrm-mbox, brcm,iproc-pdc-mbox,
marvell,armada-3700-rwtm-mailbox, rockchip,rk3368-mailbox,
eckelmann,siox-gpio, aspeed,ast2400-gfx, apm,xgene-pmu,
hisilicon,mbigen-v2, cavium,thunder-88xx,
aspeed,ast2400-cf-fsi-master,
fsi-master-gpio, and mediatek,mt8173-vpu bindings to DT schema format
- Add bindings for synaptics,synaptics_i2c touchscreen controller,
innolux,n133hse-ea1 and nlt,nl12880bc20-spwg-24 displays, and NXP
vf610 reboot controller
- Add new Arm Cortex-A320/A520AE/A720AE and
C1-Nano/Pro/Premium/Ultra CPUs. Add missing Applied Micro CPU
compatibles. Add pu-supply and fsl,soc-operating-points properties for
CPU nodes.
- Add QCom Glymur PDC and tegra264-agic interrupt controllers
- Add samsung,exynos8890-mali GPU to Arm Mali Midgard
- Drop Samsung S3C2410 display related bindings
- Allow separate DP lane and AUX connections in dp-connector
- Add some missing, undocumented vendor prefixes
- Add missing '#address-cells' properties in interrupt controller
bindings which dtc now warns about
- Drop duplicate socfpga-sdram-edac.txt, moxa,moxart-watchdog.txt,
fsl/mpic.txt, ti,opa362.txt, and cavium-thunder2.txt legacy text
bindings which are already covered by existing schemas.
- Various binding fixes for Mediatek platforms in mailbox, regulator,
pinctrl, timer, and display
- Drop work-around for yamllint quoting of values containing ','
- Various spelling, typo, grammar, and duplicated words fixes in DT
bindings and docs
- Add binding guidelines for defining properties at top level of
schemas, lack of node name ABI, and usage of simple-mfd
-----BEGIN PGP SIGNATURE-----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=pcE2
-----END PGP SIGNATURE-----
Merge tag 'devicetree-for-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
"DT core:
- Update dtc to upstream version v1.7.2-35-g52f07dcca47c
- Add stub for of_get_next_child_with_prefix()
- Convert of_msi_map_id() callers to of_msi_xlate()
DT bindings:
- Convert multiple text board bindings to DT schema format
- Add bindings for synaptics,synaptics_i2c touchscreen controller,
innolux,n133hse-ea1 and nlt,nl12880bc20-spwg-24 displays, and NXP
vf610 reboot controller
- Add new Arm Cortex-A320/A520AE/A720AE and C1-Nano/Pro/Premium/Ultra
CPUs. Add missing Applied Micro CPU compatibles. Add pu-supply and
fsl,soc-operating-points properties for CPU nodes.
- Add QCom Glymur PDC and tegra264-agic interrupt controllers
- Add samsung,exynos8890-mali GPU to Arm Mali Midgard
- Drop Samsung S3C2410 display related bindings
- Allow separate DP lane and AUX connections in dp-connector
- Add some missing, undocumented vendor prefixes
- Add missing '#address-cells' properties in interrupt controller
bindings which dtc now warns about
- Drop duplicate socfpga-sdram-edac.txt, moxa,moxart-watchdog.txt,
fsl/mpic.txt, ti,opa362.txt, and cavium-thunder2.txt legacy text
bindings which are already covered by existing schemas.
- Various binding fixes for Mediatek platforms in mailbox, regulator,
pinctrl, timer, and display
- Drop work-around for yamllint quoting of values containing ','
- Various spelling, typo, grammar, and duplicated words fixes in DT
bindings and docs
- Add binding guidelines for defining properties at top level of
schemas, lack of node name ABI, and usage of simple-mfd"
* tag 'devicetree-for-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (81 commits)
dt-bindings: arm: altera: Drop socfpga-sdram-edac.txt
dt-bindings: gpu: Convert nvidia,gk20a to DT schema
dt-bindings: rng: sparc_sun_oracle_rng: convert to DT schema
dt-bindings: vendor-prefixes: update regex for properties without a prefix
dt-bindings: display: bridge: convert megachips-stdpxxxx-ge-b850v3-fw.txt to yaml
scripts: dt_to_config: fix grammar and a typo in --help text
dt-bindings: fix spelling, typos, grammar, duplicated words
docs: dt: fix grammar and spelling
of: base: Add of_get_next_child_with_prefix() stub
dt-bindings: trivial-devices: Add compatible string synaptics,synaptics_i2c
dt-bindings: soc: mediatek: pwrap: Add power-domains property
dt-bindings: pinctrl: mt65xx: Allow gpio-line-names
dt-bindings: media: Convert MediaTek mt8173-vpu bindings to DT schema
dt-bindings: arm: mediatek: Support mt8183-audiosys variant
dt-bindings: mailbox: mediatek,gce-mailbox: Make clock-names optional
dt-bindings: regulator: mediatek,mt6331: Add missing compatible
dt-bindings: regulator: mediatek,mt6331: Fix various regulator names
dt-bindings: regulator: mediatek,mt6332-regulator: Add missing compatible
dt-bindings: pinctrl: mediatek,mt7622-pinctrl: Add missing base reg
dt-bindings: pinctrl: mediatek,mt7622-pinctrl: Add missing pwm_ch7_2
...
- Use the startup/shutdown callbacks for the PCI/MSI per device interrupt
domains.
This allows to initialize the RISCV PLIC interrupt hierarchy correctly
and provides a mechanism to decouple the masking and unmasking during
run-time from the expensive PCI mask and unmask when the underlying MSI
provider implementation allows the interrupt to be masked.
- Initialize the RISCV PLIC MSI interrupt hierarchy correctly so that the
affinity assignment works correctly by switching it over to the
startup/shutdown scheme
- Allow MSI providers to opt out from masking a PCI/MSI interrupt at the
PCI device during operation when the provider can mask the interrupt at
the underlying interrupt chip. This reduces the overhead in scenarios
where disable_irq()/enable_irq() is utilized frequently by a driver.
The PCI/MSI device level [un]masking is only required on startup and
shutdown in this case.
- Remove the conditional mask/unmask logic in the PCI/MSI layer as this
is now handled unconditionally.
- Replace the hardcoded interrupt routing in the Loongson EIOINTC
interrupt driver to respect the firmware settings and spread them out
to different CPU interrupt inputs so that the demultiplexing handler
only needs to read only a single 64-bit status register instead of
four, which significantly reduces the overhead in VMs as the status
register access causes a VM exit.
- Add support for the new AST2700 SCU interrupt controllers
- Use the legacy interrupt domain setup for the Loongson PCH-LPC
interrupt controller, which resembles the x86 legacy PIC setup and has
the same hardcoded legacy requirements.
- The usual set of cleanups, fixes and improvements all over the place
-----BEGIN PGP SIGNATURE-----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=VrB7
-----END PGP SIGNATURE-----
Merge tag 'irq-drivers-2025-09-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq chip driver updates from Thomas Gleixner:
- Use the startup/shutdown callbacks for the PCI/MSI per device
interrupt domains.
This allows us to initialize the RISCV PLIC interrupt hierarchy
correctly and provides a mechanism to decouple the masking and
unmasking during run-time from the expensive PCI mask and unmask when
the underlying MSI provider implementation allows the interrupt to be
masked.
- Initialize the RISCV PLIC MSI interrupt hierarchy correctly so that
the affinity assignment works correctly by switching it over to the
startup/shutdown scheme
- Allow MSI providers to opt out from masking a PCI/MSI interrupt at
the PCI device during operation when the provider can mask the
interrupt at the underlying interrupt chip. This reduces the overhead
in scenarios where disable_irq()/enable_irq() is utilized frequently
by a driver.
The PCI/MSI device level [un]masking is only required on startup and
shutdown in this case.
- Remove the conditional mask/unmask logic in the PCI/MSI layer as this
is now handled unconditionally.
- Replace the hardcoded interrupt routing in the Loongson EIOINTC
interrupt driver to respect the firmware settings and spread them out
to different CPU interrupt inputs so that the demultiplexing handler
only needs to read only a single 64-bit status register instead of
four, which significantly reduces the overhead in VMs as the status
register access causes a VM exit.
- Add support for the new AST2700 SCU interrupt controllers
- Use the legacy interrupt domain setup for the Loongson PCH-LPC
interrupt controller, which resembles the x86 legacy PIC setup and
has the same hardcoded legacy requirements.
- The usual set of cleanups, fixes and improvements all over the place
* tag 'irq-drivers-2025-09-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (25 commits)
irqchip/loongson-pch-lpc: Use legacy domain for PCH-LPC IRQ controller
PCI/MSI: Remove the conditional parent [un]mask logic
irqchip/msi-lib: Honor the MSI_FLAG_PCI_MSI_MASK_PARENT flag
irqchip/aspeed-scu-ic: Add support for AST2700 SCU interrupt controllers
dt-bindings: interrupt-controller: aspeed: Add AST2700 SCU IC compatibles
dt-bindings: mfd: aspeed: Add AST2700 SCU compatibles
irqchip/aspeed-scu-ic: Refactor driver to support variant-based initialization
irqchip/gic-v5: Fix error handling in gicv5_its_irq_domain_alloc()
irqchip/gic-v5: Fix loop in gicv5_its_create_itt_two_level() cleanup path
irqchip/gic-v5: Delete a stray tab
irqchip/sg2042-msi: Set irq type according to DT configuration
riscv: sophgo: dts: sg2044: Change msi irq type to IRQ_TYPE_EDGE_RISING
riscv: sophgo: dts: sg2042: Change msi irq type to IRQ_TYPE_EDGE_RISING
irqchip/gic-v2m: Handle Multiple MSI base IRQ Alignment
irqchip/renesas-rzg2l: Remove dev_err_probe() if error is -ENOMEM
irqchip: Use int type to store negative error codes
irqchip/gic-v5: Remove the redundant ITS cache invalidation
PCI/MSI: Check MSI_FLAG_PCI_MSI_MASK_PARENT in cond_[startup|shutdown]_parent()
irqchip/loongson-eiointc: Add multiple interrupt pin routing support
irqchip/loongson-eiointc: Route interrupt parsed from bios table
...
Add ACPI support for the RISC-V RPMI system MSI based irqchip driver.
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Acked-by: Jassi Brar <jassisinghbrar@gmail.com>
Link: https://lore.kernel.org/r/20250818040920.272664-23-apatel@ventanamicro.com
Signed-off-by: Paul Walmsley <pjw@kernel.org>
ACPI based loadable drivers which need MSIs will also need
imsic_acpi_get_fwnode() to update the device MSI domain so
export this function.
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Link: https://lore.kernel.org/r/20250818040920.272664-21-apatel@ventanamicro.com
Signed-off-by: Paul Walmsley <pjw@kernel.org>
The RPMI specification defines a system MSI service group which
allows application processors to receive MSIs upon system events
such as graceful shutdown/reboot request, CPU hotplug event, memory
hotplug event, etc.
Add an irqchip driver for the RISC-V RPMI system MSI service group
to directly receive system MSIs in Linux kernel.
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Link: https://lore.kernel.org/r/20250818040920.272664-14-apatel@ventanamicro.com
Signed-off-by: Paul Walmsley <pjw@kernel.org>
The presence of FEAT_GCIE_LEGACY is now handled as a CPU
feature. Therefore, drop the check and flag from the GIC driver and
gic_kvm_info as it is no longer required or used by KVM.
Signed-off-by: Sascha Bischoff <sascha.bischoff@arm.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
On certain Loongson platforms, drivers attempting to request a legacy
ISA IRQ directly via request_irq() (e.g., IRQ 4) may fail. The
virtual IRQ descriptor is not fully initialized and lacks a valid irqchip.
This issue does not affect ACPI-enumerated devices described in DSDT,
as their interrupts are properly mapped via the GSI translation path.
This indicates the LPC irqdomain itself is functional but is not correctly
handling direct VIRQ-to-HWIRQ mappings.
The root cause is the use of irq_domain_create_linear(). This API sets
up a domain for dynamic, on-demand mapping, typically triggered by a GSI
request. It does not pre-populate the mappings for the legacy VIRQ range
(0-15). Consequently, if no ACPI device claims a specific GSI
(e.g., GSI 4), the corresponding VIRQ (e.g., VIRQ 4) is never mapped to
the LPC domain. A direct call to request_irq(4, ...) then fails because
the kernel cannot resolve this VIRQ to a hardware interrupt managed by
the LPC controller.
The PCH-LPC interrupt controller is an i8259-compatible legacy device
that requires a deterministic, static 1-to-1 mapping for IRQs 0-15 to
support legacy drivers.
Fix this by replacing irq_domain_create_linear() with
irq_domain_create_legacy(). This API is specifically designed for such
controllers. It establishes the required static 1-to-1 VIRQ-to-HWIRQ
mapping for the entire legacy range (0-15) immediately upon domain
creation. This ensures that any VIRQ in this range is always resolvable,
making direct calls to request_irq() for legacy IRQs function correctly.
Signed-off-by: Ming Wang <wangming01@loongson.cn>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
For systems that implement interrupt masking at the interrupt controller
level, the MSI library offers MSI_FLAG_PCI_MSI_MASK_PARENT. It indicates
that it isn't enough to only unmask the interrupt at the PCI device level,
but that the interrupt controller must also be involved.
However, the way this is currently done is less than optimal, as the
masking/unmasking is done on both sides, always. It would be far cheaper to
unmask both at the start of times, and then only deal with the interrupt
controller mask, which is cheaper than a round-trip to the PCI endpoint.
Now that the PCI/MSI layer implements irq_startup() and irq_shutdown()
callbacks, which [un]mask at the PCI level and honor the request to
[un]mask the parent, this can be trivially done.
Overwrite the irq_mask/unmask() callbacks of the device domain interrupt
chip with irq_[un]mask_parent() when the parent domain asks for it.
[ tglx: Adopted to the PCI/MSI changes ]
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Marc Zyngier <maz@kernel.org>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/all/20250903135433.380783272@linutronix.de
Linus Torvalds
Krzysztof Kozlowski
Lorenzo Pieralisi
Nick Hu
Xianwei Zhao
Junhui Liu
Charles Mirabile
Marc Zyngier
Johan Hovold
Samuel Holland
Lucas Zampieri
Dan Carpenter
Sunil V L
Anup Patel
Sascha Bischoff
Ming Wang