linux-kernelorg-stable/include/linux/irqdomain.h

751 lines
25 KiB
C
Raw Normal View History

License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 14:07:57 +00:00
/* SPDX-License-Identifier: GPL-2.0 */
/*
* irq_domain - IRQ Translation Domains
*
* See Documentation/core-api/irq/irq-domain.rst for the details.
*/
#ifndef _LINUX_IRQDOMAIN_H
#define _LINUX_IRQDOMAIN_H
#include <linux/types.h>
#include <linux/irqdomain_defs.h>
#include <linux/irqhandler.h>
#include <linux/of.h>
#include <linux/mutex.h>
#include <linux/radix-tree.h>
struct device_node;
struct fwnode_handle;
struct irq_domain;
irqdomain: Introduce new interfaces to support hierarchy irqdomains We plan to use hierarchy irqdomain to suppport CPU vector assignment, interrupt remapping controller, IO-APIC controller, MSI interrupt and hypertransport interrupt etc on x86 platforms. So extend irqdomain interfaces to support hierarchy irqdomain. There are already many clients of current irqdomain interfaces. To minimize the changes, we choose to introduce new version 2 interfaces to support hierarchy instead of extending existing irqdomain interfaces. According to Thomas's suggestion, the most important design decision is to build hierarchy struct irq_data to support hierarchy irqdomain, so hierarchy irqdomain related data could be saved in struct irq_data. With support of hierarchy irq_data, we could also support stacked irq_chips. This is most useful in case of set_affinity(). The new hierarchy irqdomain introduces following interfaces: 1) irq_domain_alloc_irqs()/irq_domain_free_irqs(): allocate/release IRQ and related resources. 2) __irq_domain_alloc_irqs(): a special version to support legacy IRQs. 3) irq_domain_activate_irq()/irq_domain_deactivate_irq(): program interrupt controllers to activate/deactivate interrupt. There are also several help functions to ease irqdomain implemenations: 1) irq_domain_get_irq_data(): get irq_data associated with a specific irqdomain. 2) irq_domain_set_hwirq_and_chip(): save irqdomain specific data into irq_data. 3) irq_domain_alloc_irqs_parent()/irq_domain_free_irqs_parent(): invoke parent irqdomain's alloc/free callbacks. We also changed irq_startup()/irq_shutdown() to invoke irq_domain_activate_irq()/irq_domain_deactivate_irq() to program interrupt controller when start/stop interrupts. [ tglx: Folded parts of the later patch series in ] Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Grant Likely <grant.likely@linaro.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Yingjoe Chen <yingjoe.chen@mediatek.com> Cc: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-11-06 14:20:14 +00:00
struct irq_chip;
struct irq_data;
struct irq_desc;
struct cpumask;
struct seq_file;
genirq/core: Introduce struct irq_affinity_desc The interrupt affinity management uses straight cpumask pointers to convey the automatically assigned affinity masks for managed interrupts. The core interrupt descriptor allocation also decides based on the pointer being non NULL whether an interrupt is managed or not. Devices which use managed interrupts usually have two classes of interrupts: - Interrupts for multiple device queues - Interrupts for general device management Currently both classes are treated the same way, i.e. as managed interrupts. The general interrupts get the default affinity mask assigned while the device queue interrupts are spread out over the possible CPUs. Treating the general interrupts as managed is both a limitation and under certain circumstances a bug. Assume the following situation: default_irq_affinity = 4..7 So if CPUs 4-7 are offlined, then the core code will shut down the device management interrupts because the last CPU in their affinity mask went offline. It's also a limitation because it's desired to allow manual placement of the general device interrupts for various reasons. If they are marked managed then the interrupt affinity setting from both user and kernel space is disabled. To remedy that situation it's required to convey more information than the cpumasks through various interfaces related to interrupt descriptor allocation. Instead of adding yet another argument, create a new data structure 'irq_affinity_desc' which for now just contains the cpumask. This struct can be expanded to convey auxilliary information in the next step. No functional change, just preparatory work. [ tglx: Simplified logic and clarified changelog ] Suggested-by: Thomas Gleixner <tglx@linutronix.de> Suggested-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Dou Liyang <douliyangs@gmail.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: linux-pci@vger.kernel.org Cc: kashyap.desai@broadcom.com Cc: shivasharan.srikanteshwara@broadcom.com Cc: sumit.saxena@broadcom.com Cc: ming.lei@redhat.com Cc: hch@lst.de Cc: douliyang1@huawei.com Link: https://lkml.kernel.org/r/20181204155122.6327-2-douliyangs@gmail.com
2018-12-04 15:51:20 +00:00
struct irq_affinity_desc;
genirq/msi: Provide struct msi_parent_ops MSI parent domains must have some control over the MSI domains which are built on top. On domain creation they need to fill in e.g. architecture specific chip callbacks or msi domain ops to make the outermost domain parent agnostic which is obviously required for architecture independence etc. The structure contains: 1) A bitfield which exposes the supported functional features. This allows to check for features and is also used in the initialization callback to mask out unsupported features when the actual domain implementation requests a broader range, e.g. on x86 PCI multi-MSI is only supported by remapping domains but not by the underlying vector domain. The PCI/MSI code can then always request multi-MSI support, but the resulting feature set after creation might not have it set. 2) An optional string prefix which is put in front of domain and chip names during creation of the MSI domain. That allows to keep the naming schemes e.g. on x86 where PCI-MSI domains have a IR- prefix when interrupt remapping is enabled. 3) An initialization callback to sanity check the domain info of the to be created MSI domain, to restrict features and to apply changes in MSI ops and interrupt chip callbacks to accomodate to the particular MSI parent implementation and/or the underlying hierarchy. Add a conveniance function to delegate the initialization from the MSI parent domain to an underlying domain in the hierarchy. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Kevin Tian <kevin.tian@intel.com> Acked-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20221124232325.382485843@linutronix.de
2022-11-24 23:25:48 +00:00
struct msi_parent_ops;
#define IRQ_DOMAIN_IRQ_SPEC_PARAMS 16
/**
* struct irq_fwspec - generic IRQ specifier structure
*
* @fwnode: Pointer to a firmware-specific descriptor
* @param_count: Number of device-specific parameters
* @param: Device-specific parameters
*
* This structure, directly modeled after of_phandle_args, is used to
* pass a device-specific description of an interrupt.
*/
struct irq_fwspec {
struct fwnode_handle *fwnode;
int param_count;
u32 param[IRQ_DOMAIN_IRQ_SPEC_PARAMS];
};
/* Conversion function from of_phandle_args fields to fwspec */
void of_phandle_args_to_fwspec(struct device_node *np, const u32 *args,
unsigned int count, struct irq_fwspec *fwspec);
/**
* struct irq_domain_ops - Methods for irq_domain objects
* @match: Match an interrupt controller device node to a domain, returns
* 1 on a match
* @select: Match an interrupt controller fw specification. It is more generic
* than @match as it receives a complete struct irq_fwspec. Therefore,
* @select is preferred if provided. Returns 1 on a match.
* @map: Create or update a mapping between a virtual irq number and a hw
* irq number. This is called only once for a given mapping.
* @unmap: Dispose of such a mapping
* @xlate: Given a device tree node and interrupt specifier, decode
* the hardware irq number and linux irq type value.
* @alloc: Allocate @nr_irqs interrupts starting from @virq.
* @free: Free @nr_irqs interrupts starting from @virq.
* @activate: Activate one interrupt in HW (@irqd). If @reserve is set, only
* reserve the vector. If unset, assign the vector (called from
* request_irq()).
* @deactivate: Disarm one interrupt (@irqd).
* @translate: Given @fwspec, decode the hardware irq number (@out_hwirq) and
* linux irq type value (@out_type). This is a generalised @xlate
* (over struct irq_fwspec) and is preferred if provided.
* @debug_show: For domains to show specific data for an interrupt in debugfs.
*
* Functions below are provided by the driver and called whenever a new mapping
* is created or an old mapping is disposed. The driver can then proceed to
* whatever internal data structures management is required. It also needs
* to setup the irq_desc when returning from map().
*/
struct irq_domain_ops {
int (*match)(struct irq_domain *d, struct device_node *node,
enum irq_domain_bus_token bus_token);
int (*select)(struct irq_domain *d, struct irq_fwspec *fwspec,
enum irq_domain_bus_token bus_token);
int (*map)(struct irq_domain *d, unsigned int virq, irq_hw_number_t hw);
void (*unmap)(struct irq_domain *d, unsigned int virq);
int (*xlate)(struct irq_domain *d, struct device_node *node,
const u32 *intspec, unsigned int intsize,
unsigned long *out_hwirq, unsigned int *out_type);
irqdomain: Introduce new interfaces to support hierarchy irqdomains We plan to use hierarchy irqdomain to suppport CPU vector assignment, interrupt remapping controller, IO-APIC controller, MSI interrupt and hypertransport interrupt etc on x86 platforms. So extend irqdomain interfaces to support hierarchy irqdomain. There are already many clients of current irqdomain interfaces. To minimize the changes, we choose to introduce new version 2 interfaces to support hierarchy instead of extending existing irqdomain interfaces. According to Thomas's suggestion, the most important design decision is to build hierarchy struct irq_data to support hierarchy irqdomain, so hierarchy irqdomain related data could be saved in struct irq_data. With support of hierarchy irq_data, we could also support stacked irq_chips. This is most useful in case of set_affinity(). The new hierarchy irqdomain introduces following interfaces: 1) irq_domain_alloc_irqs()/irq_domain_free_irqs(): allocate/release IRQ and related resources. 2) __irq_domain_alloc_irqs(): a special version to support legacy IRQs. 3) irq_domain_activate_irq()/irq_domain_deactivate_irq(): program interrupt controllers to activate/deactivate interrupt. There are also several help functions to ease irqdomain implemenations: 1) irq_domain_get_irq_data(): get irq_data associated with a specific irqdomain. 2) irq_domain_set_hwirq_and_chip(): save irqdomain specific data into irq_data. 3) irq_domain_alloc_irqs_parent()/irq_domain_free_irqs_parent(): invoke parent irqdomain's alloc/free callbacks. We also changed irq_startup()/irq_shutdown() to invoke irq_domain_activate_irq()/irq_domain_deactivate_irq() to program interrupt controller when start/stop interrupts. [ tglx: Folded parts of the later patch series in ] Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Grant Likely <grant.likely@linaro.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Yingjoe Chen <yingjoe.chen@mediatek.com> Cc: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-11-06 14:20:14 +00:00
#ifdef CONFIG_IRQ_DOMAIN_HIERARCHY
/* extended V2 interfaces to support hierarchy irq_domains */
int (*alloc)(struct irq_domain *d, unsigned int virq,
unsigned int nr_irqs, void *arg);
void (*free)(struct irq_domain *d, unsigned int virq,
unsigned int nr_irqs);
int (*activate)(struct irq_domain *d, struct irq_data *irqd, bool reserve);
void (*deactivate)(struct irq_domain *d, struct irq_data *irq_data);
int (*translate)(struct irq_domain *d, struct irq_fwspec *fwspec,
unsigned long *out_hwirq, unsigned int *out_type);
irqdomain: Introduce new interfaces to support hierarchy irqdomains We plan to use hierarchy irqdomain to suppport CPU vector assignment, interrupt remapping controller, IO-APIC controller, MSI interrupt and hypertransport interrupt etc on x86 platforms. So extend irqdomain interfaces to support hierarchy irqdomain. There are already many clients of current irqdomain interfaces. To minimize the changes, we choose to introduce new version 2 interfaces to support hierarchy instead of extending existing irqdomain interfaces. According to Thomas's suggestion, the most important design decision is to build hierarchy struct irq_data to support hierarchy irqdomain, so hierarchy irqdomain related data could be saved in struct irq_data. With support of hierarchy irq_data, we could also support stacked irq_chips. This is most useful in case of set_affinity(). The new hierarchy irqdomain introduces following interfaces: 1) irq_domain_alloc_irqs()/irq_domain_free_irqs(): allocate/release IRQ and related resources. 2) __irq_domain_alloc_irqs(): a special version to support legacy IRQs. 3) irq_domain_activate_irq()/irq_domain_deactivate_irq(): program interrupt controllers to activate/deactivate interrupt. There are also several help functions to ease irqdomain implemenations: 1) irq_domain_get_irq_data(): get irq_data associated with a specific irqdomain. 2) irq_domain_set_hwirq_and_chip(): save irqdomain specific data into irq_data. 3) irq_domain_alloc_irqs_parent()/irq_domain_free_irqs_parent(): invoke parent irqdomain's alloc/free callbacks. We also changed irq_startup()/irq_shutdown() to invoke irq_domain_activate_irq()/irq_domain_deactivate_irq() to program interrupt controller when start/stop interrupts. [ tglx: Folded parts of the later patch series in ] Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Grant Likely <grant.likely@linaro.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Yingjoe Chen <yingjoe.chen@mediatek.com> Cc: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-11-06 14:20:14 +00:00
#endif
#ifdef CONFIG_GENERIC_IRQ_DEBUGFS
void (*debug_show)(struct seq_file *m, struct irq_domain *d,
struct irq_data *irqd, int ind);
#endif
};
extern const struct irq_domain_ops irq_generic_chip_ops;
2013-05-06 14:30:27 +00:00
struct irq_domain_chip_generic;
/**
* struct irq_domain - Hardware interrupt number translation object
* @link: Element in global irq_domain list.
* @name: Name of interrupt domain
* @ops: Pointer to irq_domain methods
* @host_data: Private data pointer for use by owner. Not touched by irq_domain
* core code.
* @flags: Per irq_domain flags
* @mapcount: The number of mapped interrupts
* @mutex: Domain lock, hierarchical domains use root domain's lock
* @root: Pointer to root domain, or containing structure if non-hierarchical
*
* Optional elements:
* @fwnode: Pointer to firmware node associated with the irq_domain. Pretty easy
* to swap it for the of_node via the irq_domain_get_of_node accessor
* @bus_token: @fwnode's device_node might be used for several irq domains. But
* in connection with @bus_token, the pair shall be unique in a
* system.
* @gc: Pointer to a list of generic chips. There is a helper function for
* setting up one or more generic chips for interrupt controllers
* drivers using the generic chip library which uses this pointer.
* @dev: Pointer to the device which instantiated the irqdomain
* With per device irq domains this is not necessarily the same
* as @pm_dev.
* @pm_dev: Pointer to a device that can be utilized for power management
* purposes related to the irq domain.
* @parent: Pointer to parent irq_domain to support hierarchy irq_domains
genirq/msi: Provide struct msi_parent_ops MSI parent domains must have some control over the MSI domains which are built on top. On domain creation they need to fill in e.g. architecture specific chip callbacks or msi domain ops to make the outermost domain parent agnostic which is obviously required for architecture independence etc. The structure contains: 1) A bitfield which exposes the supported functional features. This allows to check for features and is also used in the initialization callback to mask out unsupported features when the actual domain implementation requests a broader range, e.g. on x86 PCI multi-MSI is only supported by remapping domains but not by the underlying vector domain. The PCI/MSI code can then always request multi-MSI support, but the resulting feature set after creation might not have it set. 2) An optional string prefix which is put in front of domain and chip names during creation of the MSI domain. That allows to keep the naming schemes e.g. on x86 where PCI-MSI domains have a IR- prefix when interrupt remapping is enabled. 3) An initialization callback to sanity check the domain info of the to be created MSI domain, to restrict features and to apply changes in MSI ops and interrupt chip callbacks to accomodate to the particular MSI parent implementation and/or the underlying hierarchy. Add a conveniance function to delegate the initialization from the MSI parent domain to an underlying domain in the hierarchy. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Kevin Tian <kevin.tian@intel.com> Acked-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20221124232325.382485843@linutronix.de
2022-11-24 23:25:48 +00:00
* @msi_parent_ops: Pointer to MSI parent domain methods for per device domain init
* @exit: Function called when the domain is destroyed
*
* Revmap data, used internally by the irq domain code:
* @hwirq_max: Top limit for the HW irq number. Especially to avoid
* conflicts/failures with reserved HW irqs. Can be ~0.
* @revmap_size: Size of the linear map table @revmap
* @revmap_tree: Radix map tree for hwirqs that don't fit in the linear map
* @revmap: Linear table of irq_data pointers
*/
struct irq_domain {
struct list_head link;
const char *name;
const struct irq_domain_ops *ops;
void *host_data;
unsigned int flags;
unsigned int mapcount;
struct mutex mutex;
struct irq_domain *root;
/* Optional data */
struct fwnode_handle *fwnode;
enum irq_domain_bus_token bus_token;
struct irq_domain_chip_generic *gc;
struct device *dev;
struct device *pm_dev;
irqdomain: Introduce new interfaces to support hierarchy irqdomains We plan to use hierarchy irqdomain to suppport CPU vector assignment, interrupt remapping controller, IO-APIC controller, MSI interrupt and hypertransport interrupt etc on x86 platforms. So extend irqdomain interfaces to support hierarchy irqdomain. There are already many clients of current irqdomain interfaces. To minimize the changes, we choose to introduce new version 2 interfaces to support hierarchy instead of extending existing irqdomain interfaces. According to Thomas's suggestion, the most important design decision is to build hierarchy struct irq_data to support hierarchy irqdomain, so hierarchy irqdomain related data could be saved in struct irq_data. With support of hierarchy irq_data, we could also support stacked irq_chips. This is most useful in case of set_affinity(). The new hierarchy irqdomain introduces following interfaces: 1) irq_domain_alloc_irqs()/irq_domain_free_irqs(): allocate/release IRQ and related resources. 2) __irq_domain_alloc_irqs(): a special version to support legacy IRQs. 3) irq_domain_activate_irq()/irq_domain_deactivate_irq(): program interrupt controllers to activate/deactivate interrupt. There are also several help functions to ease irqdomain implemenations: 1) irq_domain_get_irq_data(): get irq_data associated with a specific irqdomain. 2) irq_domain_set_hwirq_and_chip(): save irqdomain specific data into irq_data. 3) irq_domain_alloc_irqs_parent()/irq_domain_free_irqs_parent(): invoke parent irqdomain's alloc/free callbacks. We also changed irq_startup()/irq_shutdown() to invoke irq_domain_activate_irq()/irq_domain_deactivate_irq() to program interrupt controller when start/stop interrupts. [ tglx: Folded parts of the later patch series in ] Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Grant Likely <grant.likely@linaro.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Yingjoe Chen <yingjoe.chen@mediatek.com> Cc: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-11-06 14:20:14 +00:00
#ifdef CONFIG_IRQ_DOMAIN_HIERARCHY
struct irq_domain *parent;
irqdomain: Introduce new interfaces to support hierarchy irqdomains We plan to use hierarchy irqdomain to suppport CPU vector assignment, interrupt remapping controller, IO-APIC controller, MSI interrupt and hypertransport interrupt etc on x86 platforms. So extend irqdomain interfaces to support hierarchy irqdomain. There are already many clients of current irqdomain interfaces. To minimize the changes, we choose to introduce new version 2 interfaces to support hierarchy instead of extending existing irqdomain interfaces. According to Thomas's suggestion, the most important design decision is to build hierarchy struct irq_data to support hierarchy irqdomain, so hierarchy irqdomain related data could be saved in struct irq_data. With support of hierarchy irq_data, we could also support stacked irq_chips. This is most useful in case of set_affinity(). The new hierarchy irqdomain introduces following interfaces: 1) irq_domain_alloc_irqs()/irq_domain_free_irqs(): allocate/release IRQ and related resources. 2) __irq_domain_alloc_irqs(): a special version to support legacy IRQs. 3) irq_domain_activate_irq()/irq_domain_deactivate_irq(): program interrupt controllers to activate/deactivate interrupt. There are also several help functions to ease irqdomain implemenations: 1) irq_domain_get_irq_data(): get irq_data associated with a specific irqdomain. 2) irq_domain_set_hwirq_and_chip(): save irqdomain specific data into irq_data. 3) irq_domain_alloc_irqs_parent()/irq_domain_free_irqs_parent(): invoke parent irqdomain's alloc/free callbacks. We also changed irq_startup()/irq_shutdown() to invoke irq_domain_activate_irq()/irq_domain_deactivate_irq() to program interrupt controller when start/stop interrupts. [ tglx: Folded parts of the later patch series in ] Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Grant Likely <grant.likely@linaro.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Yingjoe Chen <yingjoe.chen@mediatek.com> Cc: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-11-06 14:20:14 +00:00
#endif
genirq/msi: Provide struct msi_parent_ops MSI parent domains must have some control over the MSI domains which are built on top. On domain creation they need to fill in e.g. architecture specific chip callbacks or msi domain ops to make the outermost domain parent agnostic which is obviously required for architecture independence etc. The structure contains: 1) A bitfield which exposes the supported functional features. This allows to check for features and is also used in the initialization callback to mask out unsupported features when the actual domain implementation requests a broader range, e.g. on x86 PCI multi-MSI is only supported by remapping domains but not by the underlying vector domain. The PCI/MSI code can then always request multi-MSI support, but the resulting feature set after creation might not have it set. 2) An optional string prefix which is put in front of domain and chip names during creation of the MSI domain. That allows to keep the naming schemes e.g. on x86 where PCI-MSI domains have a IR- prefix when interrupt remapping is enabled. 3) An initialization callback to sanity check the domain info of the to be created MSI domain, to restrict features and to apply changes in MSI ops and interrupt chip callbacks to accomodate to the particular MSI parent implementation and/or the underlying hierarchy. Add a conveniance function to delegate the initialization from the MSI parent domain to an underlying domain in the hierarchy. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Kevin Tian <kevin.tian@intel.com> Acked-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20221124232325.382485843@linutronix.de
2022-11-24 23:25:48 +00:00
#ifdef CONFIG_GENERIC_MSI_IRQ
const struct msi_parent_ops *msi_parent_ops;
#endif
void (*exit)(struct irq_domain *d);
/* reverse map data. The linear map gets appended to the irq_domain */
irq_hw_number_t hwirq_max;
unsigned int revmap_size;
struct radix_tree_root revmap_tree;
struct irq_data __rcu *revmap[] __counted_by(revmap_size);
};
irqdomain: Introduce new interfaces to support hierarchy irqdomains We plan to use hierarchy irqdomain to suppport CPU vector assignment, interrupt remapping controller, IO-APIC controller, MSI interrupt and hypertransport interrupt etc on x86 platforms. So extend irqdomain interfaces to support hierarchy irqdomain. There are already many clients of current irqdomain interfaces. To minimize the changes, we choose to introduce new version 2 interfaces to support hierarchy instead of extending existing irqdomain interfaces. According to Thomas's suggestion, the most important design decision is to build hierarchy struct irq_data to support hierarchy irqdomain, so hierarchy irqdomain related data could be saved in struct irq_data. With support of hierarchy irq_data, we could also support stacked irq_chips. This is most useful in case of set_affinity(). The new hierarchy irqdomain introduces following interfaces: 1) irq_domain_alloc_irqs()/irq_domain_free_irqs(): allocate/release IRQ and related resources. 2) __irq_domain_alloc_irqs(): a special version to support legacy IRQs. 3) irq_domain_activate_irq()/irq_domain_deactivate_irq(): program interrupt controllers to activate/deactivate interrupt. There are also several help functions to ease irqdomain implemenations: 1) irq_domain_get_irq_data(): get irq_data associated with a specific irqdomain. 2) irq_domain_set_hwirq_and_chip(): save irqdomain specific data into irq_data. 3) irq_domain_alloc_irqs_parent()/irq_domain_free_irqs_parent(): invoke parent irqdomain's alloc/free callbacks. We also changed irq_startup()/irq_shutdown() to invoke irq_domain_activate_irq()/irq_domain_deactivate_irq() to program interrupt controller when start/stop interrupts. [ tglx: Folded parts of the later patch series in ] Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Grant Likely <grant.likely@linaro.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Yingjoe Chen <yingjoe.chen@mediatek.com> Cc: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-11-06 14:20:14 +00:00
/* Irq domain flags */
enum {
/* Irq domain is hierarchical */
IRQ_DOMAIN_FLAG_HIERARCHY = (1 << 0),
/* Irq domain name was allocated internally */
IRQ_DOMAIN_NAME_ALLOCATED = (1 << 1),
/* Irq domain is an IPI domain with virq per cpu */
IRQ_DOMAIN_FLAG_IPI_PER_CPU = (1 << 2),
/* Irq domain is an IPI domain with single virq */
IRQ_DOMAIN_FLAG_IPI_SINGLE = (1 << 3),
/* Irq domain implements MSIs */
IRQ_DOMAIN_FLAG_MSI = (1 << 4),
/*
* Irq domain implements isolated MSI, see msi_device_has_isolated_msi()
*/
IRQ_DOMAIN_FLAG_ISOLATED_MSI = (1 << 5),
/* Irq domain doesn't translate anything */
IRQ_DOMAIN_FLAG_NO_MAP = (1 << 6),
genirq/irqdomain: Provide IRQ_DOMAIN_FLAG_MSI_PARENT The new PCI/IMS (Interrupt Message Store) functionality is allowing hardware vendors to provide implementation specific storage for the MSI messages. This can be device memory and also host/guest memory, e.g. in queue memory which is shared with the hardware. This requires device specific MSI interrupt domains, which cannot be achieved by expanding the existing PCI/MSI interrupt domain concept which is a global interrupt domain shared by all PCI devices on a particular (IOMMU) segment: |--- device 1 [Vector]---[Remapping]---[PCI/MSI]--|... |--- device N This works because the PCI/MSI[-X] space is uniform, but falls apart with PCI/IMS which is implementation defined and must be available along with PCI/MSI[-X] on the same device. To support PCI/MSI[-X] plus PCI/IMS on the same device it is required to rework the PCI/MSI interrupt domain hierarchy concept in the following way: |--- [PCI/MSI] device 1 [Vector]---[Remapping]---|... |--- [PCI/MSI] device N That allows in the next step to create multiple interrupt domains per device: |--- [PCI/MSI] device 1 |--- [PCI/IMS] device 1 [Vector]---[Remapping]---|... |--- [PCI/MSI] device N |--- [PCI/IMS] device N So the domain which previously created the global PCI/MSI domain must now act as parent domain for the per device domains. The hierarchy depth is the same as before, but the PCI/MSI domains are then device specific and not longer global. Provide IRQ_DOMAIN_FLAG_MSI_PARENT, which allows to identify these parent domains, along with helpers to query it. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Reviewed-by: Kevin Tian <kevin.tian@intel.com> Acked-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20221124230313.690038274@linutronix.de
2022-11-24 23:24:15 +00:00
/* Irq domain is a MSI parent domain */
IRQ_DOMAIN_FLAG_MSI_PARENT = (1 << 8),
/* Irq domain is a MSI device domain */
IRQ_DOMAIN_FLAG_MSI_DEVICE = (1 << 9),
/* Irq domain must destroy generic chips when removed */
IRQ_DOMAIN_FLAG_DESTROY_GC = (1 << 10),
/* Address and data pair is mutable when irq_set_affinity() */
IRQ_DOMAIN_FLAG_MSI_IMMUTABLE = (1 << 11),
irqdomain: Introduce new interfaces to support hierarchy irqdomains We plan to use hierarchy irqdomain to suppport CPU vector assignment, interrupt remapping controller, IO-APIC controller, MSI interrupt and hypertransport interrupt etc on x86 platforms. So extend irqdomain interfaces to support hierarchy irqdomain. There are already many clients of current irqdomain interfaces. To minimize the changes, we choose to introduce new version 2 interfaces to support hierarchy instead of extending existing irqdomain interfaces. According to Thomas's suggestion, the most important design decision is to build hierarchy struct irq_data to support hierarchy irqdomain, so hierarchy irqdomain related data could be saved in struct irq_data. With support of hierarchy irq_data, we could also support stacked irq_chips. This is most useful in case of set_affinity(). The new hierarchy irqdomain introduces following interfaces: 1) irq_domain_alloc_irqs()/irq_domain_free_irqs(): allocate/release IRQ and related resources. 2) __irq_domain_alloc_irqs(): a special version to support legacy IRQs. 3) irq_domain_activate_irq()/irq_domain_deactivate_irq(): program interrupt controllers to activate/deactivate interrupt. There are also several help functions to ease irqdomain implemenations: 1) irq_domain_get_irq_data(): get irq_data associated with a specific irqdomain. 2) irq_domain_set_hwirq_and_chip(): save irqdomain specific data into irq_data. 3) irq_domain_alloc_irqs_parent()/irq_domain_free_irqs_parent(): invoke parent irqdomain's alloc/free callbacks. We also changed irq_startup()/irq_shutdown() to invoke irq_domain_activate_irq()/irq_domain_deactivate_irq() to program interrupt controller when start/stop interrupts. [ tglx: Folded parts of the later patch series in ] Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Grant Likely <grant.likely@linaro.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Yingjoe Chen <yingjoe.chen@mediatek.com> Cc: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-11-06 14:20:14 +00:00
/*
* Flags starting from IRQ_DOMAIN_FLAG_NONCORE are reserved
* for implementation specific purposes and ignored by the
* core code.
*/
IRQ_DOMAIN_FLAG_NONCORE = (1 << 16),
};
static inline struct device_node *irq_domain_get_of_node(struct irq_domain *d)
{
return to_of_node(d->fwnode);
}
static inline void irq_domain_set_pm_device(struct irq_domain *d, struct device *dev)
{
if (d)
d->pm_dev = dev;
}
#ifdef CONFIG_IRQ_DOMAIN
struct fwnode_handle *__irq_domain_alloc_fwnode(unsigned int type, int id,
const char *name, phys_addr_t *pa);
enum {
IRQCHIP_FWNODE_REAL,
IRQCHIP_FWNODE_NAMED,
IRQCHIP_FWNODE_NAMED_ID,
};
static inline struct fwnode_handle *irq_domain_alloc_named_fwnode(const char *name)
{
return __irq_domain_alloc_fwnode(IRQCHIP_FWNODE_NAMED, 0, name, NULL);
}
static inline struct fwnode_handle *irq_domain_alloc_named_id_fwnode(const char *name, int id)
{
return __irq_domain_alloc_fwnode(IRQCHIP_FWNODE_NAMED_ID, id, name,
NULL);
}
static inline struct fwnode_handle *irq_domain_alloc_fwnode(phys_addr_t *pa)
{
return __irq_domain_alloc_fwnode(IRQCHIP_FWNODE_REAL, 0, NULL, pa);
}
void irq_domain_free_fwnode(struct fwnode_handle *fwnode);
DEFINE_FREE(irq_domain_free_fwnode, struct fwnode_handle *, if (_T) irq_domain_free_fwnode(_T))
struct irq_domain_chip_generic_info;
/**
* struct irq_domain_info - Domain information structure
* @fwnode: firmware node for the interrupt controller
* @domain_flags: Additional flags to add to the domain flags
* @size: Size of linear map; 0 for radix mapping only
* @hwirq_max: Maximum number of interrupts supported by controller
* @direct_max: Maximum value of direct maps;
* Use ~0 for no limit; 0 for no direct mapping
* @hwirq_base: The first hardware interrupt number (legacy domains only)
* @virq_base: The first Linux interrupt number for legacy domains to
* immediately associate the interrupts after domain creation
* @bus_token: Domain bus token
* @name_suffix: Optional name suffix to avoid collisions when multiple
* domains are added using same fwnode
* @ops: Domain operation callbacks
* @host_data: Controller private data pointer
* @dgc_info: Geneneric chip information structure pointer used to
* create generic chips for the domain if not NULL.
* @init: Function called when the domain is created.
* Allow to do some additional domain initialisation.
* @exit: Function called when the domain is destroyed.
* Allow to do some additional cleanup operation.
*/
struct irq_domain_info {
struct fwnode_handle *fwnode;
unsigned int domain_flags;
unsigned int size;
irq_hw_number_t hwirq_max;
int direct_max;
unsigned int hwirq_base;
unsigned int virq_base;
enum irq_domain_bus_token bus_token;
const char *name_suffix;
const struct irq_domain_ops *ops;
void *host_data;
#ifdef CONFIG_IRQ_DOMAIN_HIERARCHY
/**
* @parent: Pointer to the parent irq domain used in a hierarchy domain
*/
struct irq_domain *parent;
#endif
struct irq_domain_chip_generic_info *dgc_info;
int (*init)(struct irq_domain *d);
void (*exit)(struct irq_domain *d);
};
struct irq_domain *irq_domain_instantiate(const struct irq_domain_info *info);
struct irq_domain *devm_irq_domain_instantiate(struct device *dev,
const struct irq_domain_info *info);
struct irq_domain *irq_domain_create_simple(struct fwnode_handle *fwnode, unsigned int size,
unsigned int first_irq,
const struct irq_domain_ops *ops, void *host_data);
struct irq_domain *irq_domain_create_legacy(struct fwnode_handle *fwnode, unsigned int size,
unsigned int first_irq, irq_hw_number_t first_hwirq,
const struct irq_domain_ops *ops, void *host_data);
struct irq_domain *irq_find_matching_fwspec(struct irq_fwspec *fwspec,
enum irq_domain_bus_token bus_token);
void irq_set_default_domain(struct irq_domain *domain);
struct irq_domain *irq_get_default_domain(void);
int irq_domain_alloc_descs(int virq, unsigned int nr_irqs, irq_hw_number_t hwirq, int node,
const struct irq_affinity_desc *affinity);
extern const struct fwnode_operations irqchip_fwnode_ops;
static inline bool is_fwnode_irqchip(const struct fwnode_handle *fwnode)
{
return fwnode && fwnode->ops == &irqchip_fwnode_ops;
}
void irq_domain_update_bus_token(struct irq_domain *domain, enum irq_domain_bus_token bus_token);
static inline struct irq_domain *irq_find_matching_fwnode(struct fwnode_handle *fwnode,
enum irq_domain_bus_token bus_token)
{
struct irq_fwspec fwspec = {
.fwnode = fwnode,
};
return irq_find_matching_fwspec(&fwspec, bus_token);
}
static inline struct irq_domain *irq_find_matching_host(struct device_node *node,
enum irq_domain_bus_token bus_token)
{
return irq_find_matching_fwnode(of_fwnode_handle(node), bus_token);
}
genirq/irqdomain: Allow irq domain aliasing It is not uncommon (at least with the ARM stuff) to have a piece of hardware that implements different flavours of "interrupts". A typical example of this is the GICv3 ITS, which implements standard PCI/MSI support, but also some form of "generic MSI". So far, the PCI/MSI domain is registered using the ITS device_node, so that irq_find_host can return it. On the contrary, the raw MSI domain is not registered with an device_node, making it impossible to be looked up by another subsystem (obviously, using the same device_node twice would only result in confusion, as it is not defined which one irq_find_host would return). A solution to this is to "type" domains that may be aliasing, and to be able to lookup an device_node that matches a given type. For this, we introduce irq_find_matching_host() as a superset of irq_find_host: struct irq_domain *irq_find_matching_host(struct device_node *node, enum irq_domain_bus_token bus_token); where bus_token is the "type" we want to match the domain against (so far, only DOMAIN_BUS_ANY is defined). This result in some moderately invasive changes on the PPC side (which is the only user of the .match method). This has otherwise no functionnal change. Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Cc: <linux-arm-kernel@lists.infradead.org> Cc: Yijing Wang <wangyijing@huawei.com> Cc: Ma Jun <majun258@huawei.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Duc Dang <dhdang@apm.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Jason Cooper <jason@lakedaemon.net> Link: http://lkml.kernel.org/r/1438091186-10244-2-git-send-email-marc.zyngier@arm.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-07-28 13:46:08 +00:00
static inline struct irq_domain *irq_find_host(struct device_node *node)
{
struct irq_domain *d;
d = irq_find_matching_host(node, DOMAIN_BUS_WIRED);
if (!d)
d = irq_find_matching_host(node, DOMAIN_BUS_ANY);
return d;
genirq/irqdomain: Allow irq domain aliasing It is not uncommon (at least with the ARM stuff) to have a piece of hardware that implements different flavours of "interrupts". A typical example of this is the GICv3 ITS, which implements standard PCI/MSI support, but also some form of "generic MSI". So far, the PCI/MSI domain is registered using the ITS device_node, so that irq_find_host can return it. On the contrary, the raw MSI domain is not registered with an device_node, making it impossible to be looked up by another subsystem (obviously, using the same device_node twice would only result in confusion, as it is not defined which one irq_find_host would return). A solution to this is to "type" domains that may be aliasing, and to be able to lookup an device_node that matches a given type. For this, we introduce irq_find_matching_host() as a superset of irq_find_host: struct irq_domain *irq_find_matching_host(struct device_node *node, enum irq_domain_bus_token bus_token); where bus_token is the "type" we want to match the domain against (so far, only DOMAIN_BUS_ANY is defined). This result in some moderately invasive changes on the PPC side (which is the only user of the .match method). This has otherwise no functionnal change. Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Cc: <linux-arm-kernel@lists.infradead.org> Cc: Yijing Wang <wangyijing@huawei.com> Cc: Ma Jun <majun258@huawei.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Duc Dang <dhdang@apm.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Jason Cooper <jason@lakedaemon.net> Link: http://lkml.kernel.org/r/1438091186-10244-2-git-send-email-marc.zyngier@arm.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-07-28 13:46:08 +00:00
}
#ifdef CONFIG_IRQ_DOMAIN_NOMAP
static inline struct irq_domain *irq_domain_create_nomap(struct fwnode_handle *fwnode,
unsigned int max_irq,
const struct irq_domain_ops *ops,
void *host_data)
{
const struct irq_domain_info info = {
.fwnode = fwnode,
.hwirq_max = max_irq,
.direct_max = max_irq,
.ops = ops,
.host_data = host_data,
};
struct irq_domain *d = irq_domain_instantiate(&info);
return IS_ERR(d) ? NULL : d;
}
unsigned int irq_create_direct_mapping(struct irq_domain *domain);
#endif
/**
* irq_domain_create_linear - Allocate and register a linear revmap irq_domain.
* @fwnode: pointer to interrupt controller's FW node.
* @size: Number of interrupts in the domain.
* @ops: map/unmap domain callbacks
* @host_data: Controller private data pointer
*
* Returns: Newly created irq_domain
*/
static inline struct irq_domain *irq_domain_create_linear(struct fwnode_handle *fwnode,
unsigned int size,
const struct irq_domain_ops *ops,
void *host_data)
{
const struct irq_domain_info info = {
.fwnode = fwnode,
.size = size,
.hwirq_max = size,
.ops = ops,
.host_data = host_data,
};
struct irq_domain *d = irq_domain_instantiate(&info);
return IS_ERR(d) ? NULL : d;
}
static inline struct irq_domain *irq_domain_create_tree(struct fwnode_handle *fwnode,
const struct irq_domain_ops *ops,
void *host_data)
{
const struct irq_domain_info info = {
.fwnode = fwnode,
.hwirq_max = ~0,
.ops = ops,
.host_data = host_data,
};
struct irq_domain *d = irq_domain_instantiate(&info);
return IS_ERR(d) ? NULL : d;
}
void irq_domain_remove(struct irq_domain *domain);
int irq_domain_associate(struct irq_domain *domain, unsigned int irq, irq_hw_number_t hwirq);
void irq_domain_associate_many(struct irq_domain *domain, unsigned int irq_base,
irq_hw_number_t hwirq_base, int count);
irqdomain: Support for static IRQ mapping and association. This adds a new strict mapping API for supporting creation of linux IRQs at existing positions within the domain. The new routines are as follows: For dynamic allocation and insertion to specified ranges: - irq_create_identity_mapping() - irq_create_strict_mappings() These will allocate and associate a range of linux IRQs at the specified location. This can be used by controllers that have their own static linux IRQ definitions to map a hwirq range to, as well as for platforms that wish to establish 1:1 identity mapping between linux and hwirq space. For insertion to specified ranges by platforms that do their own irq_desc management: - irq_domain_associate() - irq_domain_associate_many() These in turn call back in to the domain's ->map() routine, for further processing by the platform. Disassociation of IRQs get handled through irq_dispose_mapping() as normal. With these in place it should be possible to begin migration of legacy IRQ domains to linear ones, without requiring special handling for static vs dynamic IRQ definitions in DT vs non-DT paths. This also makes it possible for domains with static mappings to adopt whichever tree model best fits their needs, rather than simply restricting them to linear revmaps. Signed-off-by: Paul Mundt <lethal@linux-sh.org> [grant.likely: Reorganized irq_domain_associate{,_many} to have all logic in one place] [grant.likely: Add error checking for unallocated irq_descs at associate time] Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Rob Herring <rob.herring@calxeda.com>
2012-06-17 22:17:04 +00:00
unsigned int irq_create_mapping_affinity(struct irq_domain *domain, irq_hw_number_t hwirq,
const struct irq_affinity_desc *affinity);
unsigned int irq_create_fwspec_mapping(struct irq_fwspec *fwspec);
void irq_dispose_mapping(unsigned int virq);
/**
* irq_create_mapping - Map a hardware interrupt into linux irq space
* @domain: domain owning this hardware interrupt or NULL for default domain
* @hwirq: hardware irq number in that domain space
*
* Only one mapping per hardware interrupt is permitted.
*
* If the sense/trigger is to be specified, set_irq_type() should be called
* on the number returned from that call.
*
* Returns: Linux irq number or 0 on error
*/
static inline unsigned int irq_create_mapping(struct irq_domain *domain, irq_hw_number_t hwirq)
{
return irq_create_mapping_affinity(domain, hwirq, NULL);
}
struct irq_desc *__irq_resolve_mapping(struct irq_domain *domain,
irq_hw_number_t hwirq,
unsigned int *irq);
/**
* irq_resolve_mapping - Find a linux irq from a hw irq number.
* @domain: domain owning this hardware interrupt
* @hwirq: hardware irq number in that domain space
*
* Returns: Interrupt descriptor
*/
static inline struct irq_desc *irq_resolve_mapping(struct irq_domain *domain,
irq_hw_number_t hwirq)
{
return __irq_resolve_mapping(domain, hwirq, NULL);
}
/**
* irq_find_mapping() - Find a linux irq from a hw irq number.
* @domain: domain owning this hardware interrupt
* @hwirq: hardware irq number in that domain space
*
* Returns: Linux irq number or 0 if not found
*/
static inline unsigned int irq_find_mapping(struct irq_domain *domain,
irq_hw_number_t hwirq)
{
unsigned int irq;
if (__irq_resolve_mapping(domain, hwirq, &irq))
return irq;
return 0;
}
extern const struct irq_domain_ops irq_domain_simple_ops;
/* stock xlate functions */
int irq_domain_xlate_onecell(struct irq_domain *d, struct device_node *ctrlr,
const u32 *intspec, unsigned int intsize,
irq_hw_number_t *out_hwirq, unsigned int *out_type);
int irq_domain_xlate_twocell(struct irq_domain *d, struct device_node *ctrlr,
const u32 *intspec, unsigned int intsize,
irq_hw_number_t *out_hwirq, unsigned int *out_type);
int irq_domain_xlate_onetwocell(struct irq_domain *d, struct device_node *ctrlr,
const u32 *intspec, unsigned int intsize,
irq_hw_number_t *out_hwirq, unsigned int *out_type);
int irq_domain_xlate_twothreecell(struct irq_domain *d, struct device_node *ctrlr,
const u32 *intspec, unsigned int intsize,
irq_hw_number_t *out_hwirq, unsigned int *out_type);
int irq_domain_translate_onecell(struct irq_domain *d, struct irq_fwspec *fwspec,
unsigned long *out_hwirq, unsigned int *out_type);
int irq_domain_translate_twocell(struct irq_domain *d, struct irq_fwspec *fwspec,
unsigned long *out_hwirq, unsigned int *out_type);
int irq_domain_translate_twothreecell(struct irq_domain *d, struct irq_fwspec *fwspec,
unsigned long *out_hwirq, unsigned int *out_type);
/* IPI functions */
int irq_reserve_ipi(struct irq_domain *domain, const struct cpumask *dest);
int irq_destroy_ipi(unsigned int irq, const struct cpumask *dest);
irqdomain: Introduce new interfaces to support hierarchy irqdomains We plan to use hierarchy irqdomain to suppport CPU vector assignment, interrupt remapping controller, IO-APIC controller, MSI interrupt and hypertransport interrupt etc on x86 platforms. So extend irqdomain interfaces to support hierarchy irqdomain. There are already many clients of current irqdomain interfaces. To minimize the changes, we choose to introduce new version 2 interfaces to support hierarchy instead of extending existing irqdomain interfaces. According to Thomas's suggestion, the most important design decision is to build hierarchy struct irq_data to support hierarchy irqdomain, so hierarchy irqdomain related data could be saved in struct irq_data. With support of hierarchy irq_data, we could also support stacked irq_chips. This is most useful in case of set_affinity(). The new hierarchy irqdomain introduces following interfaces: 1) irq_domain_alloc_irqs()/irq_domain_free_irqs(): allocate/release IRQ and related resources. 2) __irq_domain_alloc_irqs(): a special version to support legacy IRQs. 3) irq_domain_activate_irq()/irq_domain_deactivate_irq(): program interrupt controllers to activate/deactivate interrupt. There are also several help functions to ease irqdomain implemenations: 1) irq_domain_get_irq_data(): get irq_data associated with a specific irqdomain. 2) irq_domain_set_hwirq_and_chip(): save irqdomain specific data into irq_data. 3) irq_domain_alloc_irqs_parent()/irq_domain_free_irqs_parent(): invoke parent irqdomain's alloc/free callbacks. We also changed irq_startup()/irq_shutdown() to invoke irq_domain_activate_irq()/irq_domain_deactivate_irq() to program interrupt controller when start/stop interrupts. [ tglx: Folded parts of the later patch series in ] Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Grant Likely <grant.likely@linaro.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Yingjoe Chen <yingjoe.chen@mediatek.com> Cc: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-11-06 14:20:14 +00:00
/* V2 interfaces to support hierarchy IRQ domains. */
struct irq_data *irq_domain_get_irq_data(struct irq_domain *domain, unsigned int virq);
void irq_domain_set_info(struct irq_domain *domain, unsigned int virq, irq_hw_number_t hwirq,
const struct irq_chip *chip, void *chip_data, irq_flow_handler_t handler,
void *handler_data, const char *handler_name);
void irq_domain_reset_irq_data(struct irq_data *irq_data);
irqdomain: Introduce new interfaces to support hierarchy irqdomains We plan to use hierarchy irqdomain to suppport CPU vector assignment, interrupt remapping controller, IO-APIC controller, MSI interrupt and hypertransport interrupt etc on x86 platforms. So extend irqdomain interfaces to support hierarchy irqdomain. There are already many clients of current irqdomain interfaces. To minimize the changes, we choose to introduce new version 2 interfaces to support hierarchy instead of extending existing irqdomain interfaces. According to Thomas's suggestion, the most important design decision is to build hierarchy struct irq_data to support hierarchy irqdomain, so hierarchy irqdomain related data could be saved in struct irq_data. With support of hierarchy irq_data, we could also support stacked irq_chips. This is most useful in case of set_affinity(). The new hierarchy irqdomain introduces following interfaces: 1) irq_domain_alloc_irqs()/irq_domain_free_irqs(): allocate/release IRQ and related resources. 2) __irq_domain_alloc_irqs(): a special version to support legacy IRQs. 3) irq_domain_activate_irq()/irq_domain_deactivate_irq(): program interrupt controllers to activate/deactivate interrupt. There are also several help functions to ease irqdomain implemenations: 1) irq_domain_get_irq_data(): get irq_data associated with a specific irqdomain. 2) irq_domain_set_hwirq_and_chip(): save irqdomain specific data into irq_data. 3) irq_domain_alloc_irqs_parent()/irq_domain_free_irqs_parent(): invoke parent irqdomain's alloc/free callbacks. We also changed irq_startup()/irq_shutdown() to invoke irq_domain_activate_irq()/irq_domain_deactivate_irq() to program interrupt controller when start/stop interrupts. [ tglx: Folded parts of the later patch series in ] Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Grant Likely <grant.likely@linaro.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Yingjoe Chen <yingjoe.chen@mediatek.com> Cc: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-11-06 14:20:14 +00:00
#ifdef CONFIG_IRQ_DOMAIN_HIERARCHY
/**
* irq_domain_create_hierarchy - Add a irqdomain into the hierarchy
* @parent: Parent irq domain to associate with the new domain
* @flags: Irq domain flags associated to the domain
* @size: Size of the domain. See below
* @fwnode: Optional fwnode of the interrupt controller
* @ops: Pointer to the interrupt domain callbacks
* @host_data: Controller private data pointer
*
* If @size is 0 a tree domain is created, otherwise a linear domain.
*
* If successful the parent is associated to the new domain and the
* domain flags are set.
*
* Returns: A pointer to IRQ domain, or %NULL on failure.
*/
static inline struct irq_domain *irq_domain_create_hierarchy(struct irq_domain *parent,
unsigned int flags, unsigned int size,
struct fwnode_handle *fwnode,
const struct irq_domain_ops *ops,
void *host_data)
{
const struct irq_domain_info info = {
.fwnode = fwnode,
.size = size,
.hwirq_max = size ? : ~0U,
.ops = ops,
.host_data = host_data,
.domain_flags = flags,
.parent = parent,
};
struct irq_domain *d = irq_domain_instantiate(&info);
return IS_ERR(d) ? NULL : d;
}
int __irq_domain_alloc_irqs(struct irq_domain *domain, int irq_base, unsigned int nr_irqs,
int node, void *arg, bool realloc,
const struct irq_affinity_desc *affinity);
void irq_domain_free_irqs(unsigned int virq, unsigned int nr_irqs);
int irq_domain_activate_irq(struct irq_data *irq_data, bool early);
void irq_domain_deactivate_irq(struct irq_data *irq_data);
irqdomain: Introduce new interfaces to support hierarchy irqdomains We plan to use hierarchy irqdomain to suppport CPU vector assignment, interrupt remapping controller, IO-APIC controller, MSI interrupt and hypertransport interrupt etc on x86 platforms. So extend irqdomain interfaces to support hierarchy irqdomain. There are already many clients of current irqdomain interfaces. To minimize the changes, we choose to introduce new version 2 interfaces to support hierarchy instead of extending existing irqdomain interfaces. According to Thomas's suggestion, the most important design decision is to build hierarchy struct irq_data to support hierarchy irqdomain, so hierarchy irqdomain related data could be saved in struct irq_data. With support of hierarchy irq_data, we could also support stacked irq_chips. This is most useful in case of set_affinity(). The new hierarchy irqdomain introduces following interfaces: 1) irq_domain_alloc_irqs()/irq_domain_free_irqs(): allocate/release IRQ and related resources. 2) __irq_domain_alloc_irqs(): a special version to support legacy IRQs. 3) irq_domain_activate_irq()/irq_domain_deactivate_irq(): program interrupt controllers to activate/deactivate interrupt. There are also several help functions to ease irqdomain implemenations: 1) irq_domain_get_irq_data(): get irq_data associated with a specific irqdomain. 2) irq_domain_set_hwirq_and_chip(): save irqdomain specific data into irq_data. 3) irq_domain_alloc_irqs_parent()/irq_domain_free_irqs_parent(): invoke parent irqdomain's alloc/free callbacks. We also changed irq_startup()/irq_shutdown() to invoke irq_domain_activate_irq()/irq_domain_deactivate_irq() to program interrupt controller when start/stop interrupts. [ tglx: Folded parts of the later patch series in ] Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Grant Likely <grant.likely@linaro.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Yingjoe Chen <yingjoe.chen@mediatek.com> Cc: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-11-06 14:20:14 +00:00
/**
* irq_domain_alloc_irqs - Allocate IRQs from domain
* @domain: domain to allocate from
* @nr_irqs: number of IRQs to allocate
* @node: NUMA node id for memory allocation
* @arg: domain specific argument
*
* See __irq_domain_alloc_irqs()' documentation.
*/
static inline int irq_domain_alloc_irqs(struct irq_domain *domain, unsigned int nr_irqs,
int node, void *arg)
irqdomain: Introduce new interfaces to support hierarchy irqdomains We plan to use hierarchy irqdomain to suppport CPU vector assignment, interrupt remapping controller, IO-APIC controller, MSI interrupt and hypertransport interrupt etc on x86 platforms. So extend irqdomain interfaces to support hierarchy irqdomain. There are already many clients of current irqdomain interfaces. To minimize the changes, we choose to introduce new version 2 interfaces to support hierarchy instead of extending existing irqdomain interfaces. According to Thomas's suggestion, the most important design decision is to build hierarchy struct irq_data to support hierarchy irqdomain, so hierarchy irqdomain related data could be saved in struct irq_data. With support of hierarchy irq_data, we could also support stacked irq_chips. This is most useful in case of set_affinity(). The new hierarchy irqdomain introduces following interfaces: 1) irq_domain_alloc_irqs()/irq_domain_free_irqs(): allocate/release IRQ and related resources. 2) __irq_domain_alloc_irqs(): a special version to support legacy IRQs. 3) irq_domain_activate_irq()/irq_domain_deactivate_irq(): program interrupt controllers to activate/deactivate interrupt. There are also several help functions to ease irqdomain implemenations: 1) irq_domain_get_irq_data(): get irq_data associated with a specific irqdomain. 2) irq_domain_set_hwirq_and_chip(): save irqdomain specific data into irq_data. 3) irq_domain_alloc_irqs_parent()/irq_domain_free_irqs_parent(): invoke parent irqdomain's alloc/free callbacks. We also changed irq_startup()/irq_shutdown() to invoke irq_domain_activate_irq()/irq_domain_deactivate_irq() to program interrupt controller when start/stop interrupts. [ tglx: Folded parts of the later patch series in ] Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Grant Likely <grant.likely@linaro.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Yingjoe Chen <yingjoe.chen@mediatek.com> Cc: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-11-06 14:20:14 +00:00
{
return __irq_domain_alloc_irqs(domain, -1, nr_irqs, node, arg, false, NULL);
irqdomain: Introduce new interfaces to support hierarchy irqdomains We plan to use hierarchy irqdomain to suppport CPU vector assignment, interrupt remapping controller, IO-APIC controller, MSI interrupt and hypertransport interrupt etc on x86 platforms. So extend irqdomain interfaces to support hierarchy irqdomain. There are already many clients of current irqdomain interfaces. To minimize the changes, we choose to introduce new version 2 interfaces to support hierarchy instead of extending existing irqdomain interfaces. According to Thomas's suggestion, the most important design decision is to build hierarchy struct irq_data to support hierarchy irqdomain, so hierarchy irqdomain related data could be saved in struct irq_data. With support of hierarchy irq_data, we could also support stacked irq_chips. This is most useful in case of set_affinity(). The new hierarchy irqdomain introduces following interfaces: 1) irq_domain_alloc_irqs()/irq_domain_free_irqs(): allocate/release IRQ and related resources. 2) __irq_domain_alloc_irqs(): a special version to support legacy IRQs. 3) irq_domain_activate_irq()/irq_domain_deactivate_irq(): program interrupt controllers to activate/deactivate interrupt. There are also several help functions to ease irqdomain implemenations: 1) irq_domain_get_irq_data(): get irq_data associated with a specific irqdomain. 2) irq_domain_set_hwirq_and_chip(): save irqdomain specific data into irq_data. 3) irq_domain_alloc_irqs_parent()/irq_domain_free_irqs_parent(): invoke parent irqdomain's alloc/free callbacks. We also changed irq_startup()/irq_shutdown() to invoke irq_domain_activate_irq()/irq_domain_deactivate_irq() to program interrupt controller when start/stop interrupts. [ tglx: Folded parts of the later patch series in ] Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Grant Likely <grant.likely@linaro.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Yingjoe Chen <yingjoe.chen@mediatek.com> Cc: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-11-06 14:20:14 +00:00
}
int irq_domain_set_hwirq_and_chip(struct irq_domain *domain, unsigned int virq,
irq_hw_number_t hwirq, const struct irq_chip *chip,
void *chip_data);
void irq_domain_free_irqs_common(struct irq_domain *domain, unsigned int virq,
unsigned int nr_irqs);
void irq_domain_free_irqs_top(struct irq_domain *domain, unsigned int virq, unsigned int nr_irqs);
int irq_domain_push_irq(struct irq_domain *domain, int virq, void *arg);
int irq_domain_pop_irq(struct irq_domain *domain, int virq);
int irq_domain_alloc_irqs_parent(struct irq_domain *domain, unsigned int irq_base,
unsigned int nr_irqs, void *arg);
void irq_domain_free_irqs_parent(struct irq_domain *domain, unsigned int irq_base,
unsigned int nr_irqs);
int irq_domain_disconnect_hierarchy(struct irq_domain *domain, unsigned int virq);
irqdomain: Introduce new interfaces to support hierarchy irqdomains We plan to use hierarchy irqdomain to suppport CPU vector assignment, interrupt remapping controller, IO-APIC controller, MSI interrupt and hypertransport interrupt etc on x86 platforms. So extend irqdomain interfaces to support hierarchy irqdomain. There are already many clients of current irqdomain interfaces. To minimize the changes, we choose to introduce new version 2 interfaces to support hierarchy instead of extending existing irqdomain interfaces. According to Thomas's suggestion, the most important design decision is to build hierarchy struct irq_data to support hierarchy irqdomain, so hierarchy irqdomain related data could be saved in struct irq_data. With support of hierarchy irq_data, we could also support stacked irq_chips. This is most useful in case of set_affinity(). The new hierarchy irqdomain introduces following interfaces: 1) irq_domain_alloc_irqs()/irq_domain_free_irqs(): allocate/release IRQ and related resources. 2) __irq_domain_alloc_irqs(): a special version to support legacy IRQs. 3) irq_domain_activate_irq()/irq_domain_deactivate_irq(): program interrupt controllers to activate/deactivate interrupt. There are also several help functions to ease irqdomain implemenations: 1) irq_domain_get_irq_data(): get irq_data associated with a specific irqdomain. 2) irq_domain_set_hwirq_and_chip(): save irqdomain specific data into irq_data. 3) irq_domain_alloc_irqs_parent()/irq_domain_free_irqs_parent(): invoke parent irqdomain's alloc/free callbacks. We also changed irq_startup()/irq_shutdown() to invoke irq_domain_activate_irq()/irq_domain_deactivate_irq() to program interrupt controller when start/stop interrupts. [ tglx: Folded parts of the later patch series in ] Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Grant Likely <grant.likely@linaro.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Yingjoe Chen <yingjoe.chen@mediatek.com> Cc: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-11-06 14:20:14 +00:00
static inline bool irq_domain_is_hierarchy(struct irq_domain *domain)
{
return domain->flags & IRQ_DOMAIN_FLAG_HIERARCHY;
}
static inline bool irq_domain_is_ipi(struct irq_domain *domain)
{
return domain->flags & (IRQ_DOMAIN_FLAG_IPI_PER_CPU | IRQ_DOMAIN_FLAG_IPI_SINGLE);
}
static inline bool irq_domain_is_ipi_per_cpu(struct irq_domain *domain)
{
return domain->flags & IRQ_DOMAIN_FLAG_IPI_PER_CPU;
}
static inline bool irq_domain_is_ipi_single(struct irq_domain *domain)
{
return domain->flags & IRQ_DOMAIN_FLAG_IPI_SINGLE;
}
static inline bool irq_domain_is_msi(struct irq_domain *domain)
{
return domain->flags & IRQ_DOMAIN_FLAG_MSI;
}
genirq/irqdomain: Provide IRQ_DOMAIN_FLAG_MSI_PARENT The new PCI/IMS (Interrupt Message Store) functionality is allowing hardware vendors to provide implementation specific storage for the MSI messages. This can be device memory and also host/guest memory, e.g. in queue memory which is shared with the hardware. This requires device specific MSI interrupt domains, which cannot be achieved by expanding the existing PCI/MSI interrupt domain concept which is a global interrupt domain shared by all PCI devices on a particular (IOMMU) segment: |--- device 1 [Vector]---[Remapping]---[PCI/MSI]--|... |--- device N This works because the PCI/MSI[-X] space is uniform, but falls apart with PCI/IMS which is implementation defined and must be available along with PCI/MSI[-X] on the same device. To support PCI/MSI[-X] plus PCI/IMS on the same device it is required to rework the PCI/MSI interrupt domain hierarchy concept in the following way: |--- [PCI/MSI] device 1 [Vector]---[Remapping]---|... |--- [PCI/MSI] device N That allows in the next step to create multiple interrupt domains per device: |--- [PCI/MSI] device 1 |--- [PCI/IMS] device 1 [Vector]---[Remapping]---|... |--- [PCI/MSI] device N |--- [PCI/IMS] device N So the domain which previously created the global PCI/MSI domain must now act as parent domain for the per device domains. The hierarchy depth is the same as before, but the PCI/MSI domains are then device specific and not longer global. Provide IRQ_DOMAIN_FLAG_MSI_PARENT, which allows to identify these parent domains, along with helpers to query it. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Reviewed-by: Kevin Tian <kevin.tian@intel.com> Acked-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20221124230313.690038274@linutronix.de
2022-11-24 23:24:15 +00:00
static inline bool irq_domain_is_msi_parent(struct irq_domain *domain)
{
return domain->flags & IRQ_DOMAIN_FLAG_MSI_PARENT;
}
static inline bool irq_domain_is_msi_device(struct irq_domain *domain)
{
return domain->flags & IRQ_DOMAIN_FLAG_MSI_DEVICE;
}
static inline bool irq_domain_is_msi_immutable(struct irq_domain *domain)
{
return domain->flags & IRQ_DOMAIN_FLAG_MSI_IMMUTABLE;
}
irqdomain: Introduce new interfaces to support hierarchy irqdomains We plan to use hierarchy irqdomain to suppport CPU vector assignment, interrupt remapping controller, IO-APIC controller, MSI interrupt and hypertransport interrupt etc on x86 platforms. So extend irqdomain interfaces to support hierarchy irqdomain. There are already many clients of current irqdomain interfaces. To minimize the changes, we choose to introduce new version 2 interfaces to support hierarchy instead of extending existing irqdomain interfaces. According to Thomas's suggestion, the most important design decision is to build hierarchy struct irq_data to support hierarchy irqdomain, so hierarchy irqdomain related data could be saved in struct irq_data. With support of hierarchy irq_data, we could also support stacked irq_chips. This is most useful in case of set_affinity(). The new hierarchy irqdomain introduces following interfaces: 1) irq_domain_alloc_irqs()/irq_domain_free_irqs(): allocate/release IRQ and related resources. 2) __irq_domain_alloc_irqs(): a special version to support legacy IRQs. 3) irq_domain_activate_irq()/irq_domain_deactivate_irq(): program interrupt controllers to activate/deactivate interrupt. There are also several help functions to ease irqdomain implemenations: 1) irq_domain_get_irq_data(): get irq_data associated with a specific irqdomain. 2) irq_domain_set_hwirq_and_chip(): save irqdomain specific data into irq_data. 3) irq_domain_alloc_irqs_parent()/irq_domain_free_irqs_parent(): invoke parent irqdomain's alloc/free callbacks. We also changed irq_startup()/irq_shutdown() to invoke irq_domain_activate_irq()/irq_domain_deactivate_irq() to program interrupt controller when start/stop interrupts. [ tglx: Folded parts of the later patch series in ] Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Grant Likely <grant.likely@linaro.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Yingjoe Chen <yingjoe.chen@mediatek.com> Cc: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-11-06 14:20:14 +00:00
#else /* CONFIG_IRQ_DOMAIN_HIERARCHY */
static inline int irq_domain_alloc_irqs(struct irq_domain *domain, unsigned int nr_irqs,
int node, void *arg)
irqdomain: Introduce new interfaces to support hierarchy irqdomains We plan to use hierarchy irqdomain to suppport CPU vector assignment, interrupt remapping controller, IO-APIC controller, MSI interrupt and hypertransport interrupt etc on x86 platforms. So extend irqdomain interfaces to support hierarchy irqdomain. There are already many clients of current irqdomain interfaces. To minimize the changes, we choose to introduce new version 2 interfaces to support hierarchy instead of extending existing irqdomain interfaces. According to Thomas's suggestion, the most important design decision is to build hierarchy struct irq_data to support hierarchy irqdomain, so hierarchy irqdomain related data could be saved in struct irq_data. With support of hierarchy irq_data, we could also support stacked irq_chips. This is most useful in case of set_affinity(). The new hierarchy irqdomain introduces following interfaces: 1) irq_domain_alloc_irqs()/irq_domain_free_irqs(): allocate/release IRQ and related resources. 2) __irq_domain_alloc_irqs(): a special version to support legacy IRQs. 3) irq_domain_activate_irq()/irq_domain_deactivate_irq(): program interrupt controllers to activate/deactivate interrupt. There are also several help functions to ease irqdomain implemenations: 1) irq_domain_get_irq_data(): get irq_data associated with a specific irqdomain. 2) irq_domain_set_hwirq_and_chip(): save irqdomain specific data into irq_data. 3) irq_domain_alloc_irqs_parent()/irq_domain_free_irqs_parent(): invoke parent irqdomain's alloc/free callbacks. We also changed irq_startup()/irq_shutdown() to invoke irq_domain_activate_irq()/irq_domain_deactivate_irq() to program interrupt controller when start/stop interrupts. [ tglx: Folded parts of the later patch series in ] Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Grant Likely <grant.likely@linaro.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Yingjoe Chen <yingjoe.chen@mediatek.com> Cc: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-11-06 14:20:14 +00:00
{
return -1;
}
static inline void irq_domain_free_irqs(unsigned int virq, unsigned int nr_irqs) { }
irqdomain: Introduce new interfaces to support hierarchy irqdomains We plan to use hierarchy irqdomain to suppport CPU vector assignment, interrupt remapping controller, IO-APIC controller, MSI interrupt and hypertransport interrupt etc on x86 platforms. So extend irqdomain interfaces to support hierarchy irqdomain. There are already many clients of current irqdomain interfaces. To minimize the changes, we choose to introduce new version 2 interfaces to support hierarchy instead of extending existing irqdomain interfaces. According to Thomas's suggestion, the most important design decision is to build hierarchy struct irq_data to support hierarchy irqdomain, so hierarchy irqdomain related data could be saved in struct irq_data. With support of hierarchy irq_data, we could also support stacked irq_chips. This is most useful in case of set_affinity(). The new hierarchy irqdomain introduces following interfaces: 1) irq_domain_alloc_irqs()/irq_domain_free_irqs(): allocate/release IRQ and related resources. 2) __irq_domain_alloc_irqs(): a special version to support legacy IRQs. 3) irq_domain_activate_irq()/irq_domain_deactivate_irq(): program interrupt controllers to activate/deactivate interrupt. There are also several help functions to ease irqdomain implemenations: 1) irq_domain_get_irq_data(): get irq_data associated with a specific irqdomain. 2) irq_domain_set_hwirq_and_chip(): save irqdomain specific data into irq_data. 3) irq_domain_alloc_irqs_parent()/irq_domain_free_irqs_parent(): invoke parent irqdomain's alloc/free callbacks. We also changed irq_startup()/irq_shutdown() to invoke irq_domain_activate_irq()/irq_domain_deactivate_irq() to program interrupt controller when start/stop interrupts. [ tglx: Folded parts of the later patch series in ] Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Grant Likely <grant.likely@linaro.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Yingjoe Chen <yingjoe.chen@mediatek.com> Cc: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-11-06 14:20:14 +00:00
static inline bool irq_domain_is_hierarchy(struct irq_domain *domain)
{
return false;
}
static inline bool irq_domain_is_ipi(struct irq_domain *domain)
{
return false;
}
static inline bool irq_domain_is_ipi_per_cpu(struct irq_domain *domain)
{
return false;
}
static inline bool irq_domain_is_ipi_single(struct irq_domain *domain)
{
return false;
}
static inline bool irq_domain_is_msi(struct irq_domain *domain)
{
return false;
}
genirq/irqdomain: Provide IRQ_DOMAIN_FLAG_MSI_PARENT The new PCI/IMS (Interrupt Message Store) functionality is allowing hardware vendors to provide implementation specific storage for the MSI messages. This can be device memory and also host/guest memory, e.g. in queue memory which is shared with the hardware. This requires device specific MSI interrupt domains, which cannot be achieved by expanding the existing PCI/MSI interrupt domain concept which is a global interrupt domain shared by all PCI devices on a particular (IOMMU) segment: |--- device 1 [Vector]---[Remapping]---[PCI/MSI]--|... |--- device N This works because the PCI/MSI[-X] space is uniform, but falls apart with PCI/IMS which is implementation defined and must be available along with PCI/MSI[-X] on the same device. To support PCI/MSI[-X] plus PCI/IMS on the same device it is required to rework the PCI/MSI interrupt domain hierarchy concept in the following way: |--- [PCI/MSI] device 1 [Vector]---[Remapping]---|... |--- [PCI/MSI] device N That allows in the next step to create multiple interrupt domains per device: |--- [PCI/MSI] device 1 |--- [PCI/IMS] device 1 [Vector]---[Remapping]---|... |--- [PCI/MSI] device N |--- [PCI/IMS] device N So the domain which previously created the global PCI/MSI domain must now act as parent domain for the per device domains. The hierarchy depth is the same as before, but the PCI/MSI domains are then device specific and not longer global. Provide IRQ_DOMAIN_FLAG_MSI_PARENT, which allows to identify these parent domains, along with helpers to query it. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Reviewed-by: Kevin Tian <kevin.tian@intel.com> Acked-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20221124230313.690038274@linutronix.de
2022-11-24 23:24:15 +00:00
static inline bool irq_domain_is_msi_parent(struct irq_domain *domain)
{
return false;
}
static inline bool irq_domain_is_msi_device(struct irq_domain *domain)
{
return false;
}
irqdomain: Introduce new interfaces to support hierarchy irqdomains We plan to use hierarchy irqdomain to suppport CPU vector assignment, interrupt remapping controller, IO-APIC controller, MSI interrupt and hypertransport interrupt etc on x86 platforms. So extend irqdomain interfaces to support hierarchy irqdomain. There are already many clients of current irqdomain interfaces. To minimize the changes, we choose to introduce new version 2 interfaces to support hierarchy instead of extending existing irqdomain interfaces. According to Thomas's suggestion, the most important design decision is to build hierarchy struct irq_data to support hierarchy irqdomain, so hierarchy irqdomain related data could be saved in struct irq_data. With support of hierarchy irq_data, we could also support stacked irq_chips. This is most useful in case of set_affinity(). The new hierarchy irqdomain introduces following interfaces: 1) irq_domain_alloc_irqs()/irq_domain_free_irqs(): allocate/release IRQ and related resources. 2) __irq_domain_alloc_irqs(): a special version to support legacy IRQs. 3) irq_domain_activate_irq()/irq_domain_deactivate_irq(): program interrupt controllers to activate/deactivate interrupt. There are also several help functions to ease irqdomain implemenations: 1) irq_domain_get_irq_data(): get irq_data associated with a specific irqdomain. 2) irq_domain_set_hwirq_and_chip(): save irqdomain specific data into irq_data. 3) irq_domain_alloc_irqs_parent()/irq_domain_free_irqs_parent(): invoke parent irqdomain's alloc/free callbacks. We also changed irq_startup()/irq_shutdown() to invoke irq_domain_activate_irq()/irq_domain_deactivate_irq() to program interrupt controller when start/stop interrupts. [ tglx: Folded parts of the later patch series in ] Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Grant Likely <grant.likely@linaro.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Yingjoe Chen <yingjoe.chen@mediatek.com> Cc: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-11-06 14:20:14 +00:00
#endif /* CONFIG_IRQ_DOMAIN_HIERARCHY */
#ifdef CONFIG_GENERIC_MSI_IRQ
int msi_device_domain_alloc_wired(struct irq_domain *domain, unsigned int hwirq, unsigned int type);
void msi_device_domain_free_wired(struct irq_domain *domain, unsigned int virq);
#else
static inline int msi_device_domain_alloc_wired(struct irq_domain *domain, unsigned int hwirq,
unsigned int type)
{
WARN_ON_ONCE(1);
return -EINVAL;
}
static inline void msi_device_domain_free_wired(struct irq_domain *domain, unsigned int virq)
{
WARN_ON_ONCE(1);
}
#endif
/* Deprecated functions. Will be removed in the merge window */
static inline struct fwnode_handle *of_node_to_fwnode(struct device_node *node)
{
return node ? &node->fwnode : NULL;
}
static inline struct irq_domain *irq_domain_add_tree(struct device_node *of_node,
const struct irq_domain_ops *ops,
void *host_data)
{
struct irq_domain_info info = {
.fwnode = of_fwnode_handle(of_node),
.hwirq_max = ~0U,
.ops = ops,
.host_data = host_data,
};
struct irq_domain *d;
d = irq_domain_instantiate(&info);
return IS_ERR(d) ? NULL : d;
}
static inline struct irq_domain *irq_domain_add_linear(struct device_node *of_node,
unsigned int size,
const struct irq_domain_ops *ops,
void *host_data)
{
struct irq_domain_info info = {
.fwnode = of_fwnode_handle(of_node),
.size = size,
.hwirq_max = size,
.ops = ops,
.host_data = host_data,
};
struct irq_domain *d;
d = irq_domain_instantiate(&info);
return IS_ERR(d) ? NULL : d;
}
#else /* CONFIG_IRQ_DOMAIN */
static inline void irq_dispose_mapping(unsigned int virq) { }
static inline struct irq_domain *irq_find_matching_fwnode(struct fwnode_handle *fwnode,
enum irq_domain_bus_token bus_token)
{
return NULL;
}
#endif /* !CONFIG_IRQ_DOMAIN */
#endif /* _LINUX_IRQDOMAIN_H */