Since Linux 6.11 the kernel allows path to be NULL if flags &
AT_EMPTY_PATH. Let's allow users to take the advantage if they don't
care running on old kernels.
Signed-off-by: Miao Wang <shankerwangmiao@gmail.com>
Signed-off-by: Xi Ruoyao <xry111@xry111.site>
Reviewed-by: Florian Weimer <fweimer@redhat.com>
(cherry picked from commit 55618e1396)
dl_init_cacheinfo retrieves various information about cache
sizes, using the cpuid instruction on x86.
Previously, the same cpuid leaves were queried multiple times.
This behavior caused intel_check_word to prominently show up in
profiles of dynamic loader startup on the Intel(R) Xeon(R) Gold 6430.
The big performance impact could not be reproduced on other Intel cpus.
This patch reduces the number of cpuid queries on startup
by caching their results on the stack for reuse when searching for a
different cache size value.
This approach does not change the overall design of
the cache enumeration code (repeated calls to handle_* functions).
The values are cached on the stack instead of globally (e.g.
in the cpu_features global) because they are never needed after
early initialization.
The cache is only active for Intel cpus, because it has not yet
been shown through benchmarks that it meaningfully improves performance
for other processors.
Signed-off-by: Fabian Rast <fabian.rast@tum.de>
Reviewed-by: Sunil K Pandey <skpgkp2@gmail.com>
(cherry picked from commit df83fa8813)
There is a conditional inclusion of <linux/mount.h> earlier in the file.
If that defines the macros, do not redefine them. This addresses build
problems as the token sequence used by the UAPI macro definitions
changes between Linux versions.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
(cherry picked from commit d12b017cdd)
Including sys/mount.h should not implicitly include fcntl.h
as that causes namespace pollution and conflicts with kernel
headers. It only needs O_CLOEXEC for OPEN_TREE_CLOEXEC
(although it shouldn't need that, but it's defined that way)
so we provide that define (via a private version) separately.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Tested-by: Florian Weimer <fweimer@redhat.com>
(cherry picked from commit 419245719c)
Follow the example in iso-2022-jp-3.c and use the __count state
variable to store the pending character. This avoids restarting
the conversion if the output buffer ends between two 4-byte UCS-4
code points, so that the assert reported in the bug can no longer
happen.
Even though the fix is applied to ibm1364.c, the change is only
effective for the two HAS_COMBINED codecs for IBM1390, IBM1399.
The test case was mostly auto-generated using
claude-4.6-opus-high-thinking, and composer-2-fast shows up in the
log as well. During review, gpt-5.4-xhigh flagged that the original
version of the test case was not exercising the new character
flush logic.
This fixes bug 33980.
Assisted-by: LLM
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
(cherry picked from commit d6f08d1cf0)
The initialization process of libc.so calls mmap() several times and the
kernel may lay the maps into the gap. If all pages in the gap are
occupied, the test would not be able to find the gap with mmap() and the
test would fail.
The failure reproduces most frequently on LoongArch because with the
commonly used page size (16 KiB) the gap only contains 4 pages and the
probability they are all occupied is not near to zero.
With the changes in the patch, a test run may output:
info: ld.so link map is not contiguous
info: object "/dev/zero" found at 0x7ffff1fe0000 - 0x7ffff1fe4000
info: anonymous mapping found at 0x7ffff1fe4000 - 0x7ffff1fec000
Also take the chance to fix a mistake in the "object found at" message
which has puzzled me during the initial debug session.
Signed-off-by: Xi Ruoyao <xry111@xry111.site>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
(cherry picked from commit aed8390a6a)
The processed hostname in getanswer_ptr should be correctly checked to
avoid invalid characters from being allowed, including shell
metacharacters. It is a security issue to fail to check the returned
hostname for validity.
A regression test is added for invalid metacharacters and other cases
of invalid or valid characters.
No regressions on x86_64-linux-gnu.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
(cherry picked from commit e10977481f)
The answer section boundary was previously ignored, and the code in
getanswer_ptr would iterate past the last resource record, but not
beyond the end of the returned data. This could lead to subsequent data
being interpreted as answer records, thus violating the DNS
specification. Such resource records could be maliciously crafted and
hidden from other tooling, but processed by the glibc stub resolver and
acted upon by the application. While we trust the data returned by the
configured recursive resolvers, we should not trust its format and
should validate it as required. It is a security issue to incorrectly
process the DNS protocol.
A regression test is added for response section crossing.
No regressions on x86_64-linux-gnu.
Reviewed-by: Collin Funk <collin.funk1@gmail.com>
(cherry picked from commit 9f5f18aab4)
The test was not properly scheduled for execution with a Makefile
dependency.
Fixes commit 80cc58ea2d ("posix: Reset
wordexp_t fields with WRDE_REUSE (CVE-2025-15281 / BZ 33814").
(cherry picked from commit bed2db02f3)
The expression inptr + 1 can technically be invalid: if inptr == inend,
inptr may point one element past the end of an array.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
(cherry picked from commit e98bd0c54d)
Two tests fail from time to time when a new flag is added for the
p{write,read}v2 functions in a new Linux kernel:
- misc/tst-preadvwritev2
- misc/tst-preadvwritev64v2
This disrupts when testing Glibc on a system with a newer kernel
and it seems we can try improve testing for invalid flags setting
all the bits that are not supposed to be supported (rather than
setting only the next unsupported bit).
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
(cherry picked from commit 58a31b4316)
The wordexp fails to properly initialize the input wordexp_t when
WRDE_REUSE is used. The wordexp_t struct is properly freed, but
reuses the old wc_wordc value and updates the we_wordv in the
wrong position. A later wordfree will then call free with an
invalid pointer.
Checked on x86_64-linux-gnu and i686-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
(cherry picked from commit 80cc58ea2d)
The default network value of zero for net was never tested for and
results in a DNS query constructed from uninitialized stack bytes.
The solution is to provide a default query for the case where net
is zero.
Adding a test case for this was straight forward given the existence of
tst-resolv-network and if the test is added without the fix you observe
this failure:
FAIL: resolv/tst-resolv-network
original exit status 1
error: tst-resolv-network.c:174: invalid QNAME: \146\218\129\128
error: 1 test failures
With a random QNAME resulting from the use of uninitialized stack bytes.
After the fix the test passes.
Additionally verified using wireshark before and after to ensure
on-the-wire bytes for the DNS query were as expected.
No regressions on x86_64.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
(cherry picked from commit e56ff82d50)
The change to cap valid sizes to PTRDIFF_MAX inadvertently dropped the
overflow check for alignment in memalign functions, _mid_memalign and
_int_memalign. Reinstate the overflow check in _int_memalign, aligned
with the PTRDIFF_MAX change since that is directly responsible for the
CVE. The missing _mid_memalign check is not relevant (and does not have
a security impact) and may need a different approach to fully resolve,
so it has been omitted.
CVE-Id: CVE-2026-0861
Vulnerable-Commit: 9bf8e29ca1
Reported-by: Igor Morgenstern, Aisle Research
Fixes: BZ #33796
Reviewed-by: Wilco Dijkstra <Wilco.Dijkstra@arm.com>
Signed-off-by: Siddhesh Poyarekar <siddhesh@gotplt.org>
(cherry picked from commit c9188d3337)
Check lock availability before acquisition to reduce cache line
bouncing. Significantly improves trylock throughput on multi-core
systems under heavy contention.
Tested on x86_64.
Fixes BZ #33704.
Co-authored-by: Alex M Wells <alex.m.wells@intel.com>
Reviewed-by: Wilco Dijkstra <Wilco.Dijkstra@arm.com>
(cherry picked from commit 63716823db)
Using TEST_VERIFY (crname_target != crname) instructs some analysis
tools that crname_target == crname might hold. Under this assumption,
they report a use-after-free for crname_target->offset below, caused
by the previous free (crname).
Reviewed-by: Collin Funk <collin.funk1@gmail.com>
(cherry picked from commit b64335ff11)
Add a bit of descriptive paranoia to the values we read from
the ELF headers and use to access data.
Reviewed-by: Collin Funk <collin.funk1@gmail.com>
(cherry picked from commit 324084649b)
Add valid_decimal_value to check valid decimal value in a string to
avoid uninitialized endp in add_prefixlist and gaiconf_init as reported
by Clang 19:
./getaddrinfo.c:1884:11: error: variable 'endp' is used uninitialized whenever '||' condition is true [-Werror,-Wsometimes-uninitialized]
1884 | && (cp == NULL
| ^~~~~~~~~~
./getaddrinfo.c:1887:11: note: uninitialized use occurs here
1887 | && *endp == '\0'
| ^~~~
./getaddrinfo.c:1884:11: note: remove the '||' if its condition is always false
1884 | && (cp == NULL
| ^~~~~~~~~~
1885 | || (bits = strtoul (cp, &endp, 10)) != ULONG_MAX
| ~~
./getaddrinfo.c:1875:13: note: initialize the variable 'endp' to silence this warning
1875 | char *endp;
| ^
| = NULL
This fixes BZ #32465.
Signed-off-by: H.J. Lu <hjl.tools@gmail.com>
Reviewed-by: Sam James <sam@gentoo.org>
(cherry picked from commit 33aeb88c5b)
Replace non-volatile(v20) by volatile(v17)
since v20 is not restored
Reviewed-by: Peter Bergner <bergner@tenstorrent.com>
(cherry picked from commit b59799f14f)
This patch addresses the actual cause of CVE-2025-5745
The vector non-volatile registers are not used anymore for
32 byte load and comparison operation
Additionally, the assembler workaround used earlier for the
instruction lxvp is replaced with actual instruction.
Signed-off-by: Sachin Monga <smonga@linux.ibm.com>
Co-authored-by: Paul Murphy <paumurph@redhat.com>
(cherry picked from commit 2ea943f7d4)
This patch addresses the actual cause of CVE-2025-5702
The vector non-volatile registers are not used anymore for
32 byte load and comparison operation
Additionally, the assembler workaround used earlier for the
instruction lxvp is replaced with actual instruction.
Signed-off-by: Sachin Monga <smonga@linux.ibm.com>
Co-authored-by: Paul Murphy <paumurph@redhat.com>
(cherry picked from commit 9a40b1cda5)
powf:
Update scalar special case function to best use new interface.
pow:
Make specialcase NOINLINE to prevent str/ldr leaking in fast path.
Remove depency in sv_call2, as new callback impl is not a
performance gain.
Replace with vectorised specialcase since structure of scalar
routine is fairly simple.
Throughput gain of about 5-10% on V1 for large values and 25% for subnormal `x`.
Reviewed-by: Wilco Dijkstra <Wilco.Dijkstra@arm.com>
(cherry picked from commit bb6519de1e)
Previously presence of special-cases in one lane could affect the
results in other lanes due to unconditional scalar fallback. The old
WANT_SIMD_EXCEPT option (which has never been enabled in libmvec) has
been removed from AOR, making it easier to spot and fix this. 4%
improvement in throughput with GCC 14 on Neoverse V1. This bug is
present as far back as 2.39 (where tan was first introduced).
Reviewed-by: Wilco Dijkstra <Wilco.Dijkstra@arm.com>
(cherry picked from commit 6c22823da5)
Instead of using SVE instructions to marshall special results into the
correct lane, just write the entire vector (and the predicate) to
memory, then use cheaper scalar operations.
Geomean speedup of 16% in special intervals on Neoverse with GCC 14.
Reviewed-by: Wilco Dijkstra <Wilco.Dijkstra@arm.com>
(cherry picked from commit 5b82fb1882)
Use the correct include for the SIGCHLD macro: signal.h
Reviewed-by: Wilco Dijkstra <Wilco.Dijkstra@arm.com>
(cherry picked from commit a9c426bcca)
(cherry picked from commit 17c3eab387)
(cherry picked from commit 215e9155ea)
This commit adds tests for the following use cases relevant to handing of
the SME state:
- fork() and vfork()
- clone() and clone3()
- signal handler
While most cases are trivial, the case of clone3() is more complicated since
the clone3() symbol is not public in Glibc.
To avoid having to check all possible ways clone3() may be called via other
public functions (e.g. vfork() or pthread_create()), we put together a test
that links directly with clone3.o. All the existing functions that have calls
to clone3() may not actually use it, in which case the outcome of such tests
would be unexpected. Having a direct call to the clone3() symbol in the test
allows to check precisely what we need to test: that the __arm_za_disable()
function is indeed called and has the desired effect.
Linking to clone3.o also requires linking to __arm_za_disable.o that in
turn requires the _dl_hwcap2 hidden symbol which to provide in the test
and initialise it before using.
Co-authored-by: Adhemerval Zanella Netto <adhemerval.zanella@linaro.org>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
(cherry picked from commit ecb0fc2f0f)
(cherry picked from commit 71874f167a)
(cherry picked from commit e4ffcf32b9)
This change adds a call to the __arm_za_disable() function immediately
before the SVC instruction inside clone() and clone3() wrappers. It also
adds a macro for inline clone() used in fork() and adds the same call to
the vfork implementation. This sets the ZA state of SME to "off" on return
from these functions (for both the child and the parent).
The __arm_za_disable() function is described in [1] (8.1.3). Note that
the internal Glibc name for this function is __libc_arm_za_disable().
When this change was originally proposed [2,3], it generated a long
discussion where several questions and concerns were raised. Here we
will address these concerns and explain why this change is useful and,
in fact, necessary.
In a nutshell, a C library that conforms to the AAPCS64 spec [1] (pertinent
to this change, mainly, the chapters 6.2 and 6.6), should have a call to the
__arm_za_disable() function in clone() and clone3() wrappers. The following
explains in detail why this is the case.
When we consider using the __arm_za_disable() function inside the clone()
and clone3() libc wrappers, we talk about the C library subroutines clone()
and clone3() rather than the syscalls with similar names. In the current
version of Glibc, clone() is public and clone3() is private, but it being
private is not pertinent to this discussion.
We will begin with stating that this change is NOT a bug fix for something
in the kernel. The requirement to call __arm_za_disable() does NOT come from
the kernel. It also is NOT needed to satisfy a contract between the kernel
and userspace. This is why it is not for the kernel documentation to describe
this requirement. This requirement is instead needed to satisfy a pure userspace
scheme outlined in [1] and to make sure that software that uses Glibc (or any
other C library that has correct handling of SME states (see below)) conforms
to [1] without having to unnecessarily become SME-aware thus losing portability.
To recap (see [1] (6.2)), SME extension defines SME state which is part of
processor state. Part of this SME state is ZA state that is necessary to
manage ZA storage register in the context of the ZA lazy saving scheme [1]
(6.6). This scheme exists because it would be challenging to handle ZA
storage of SME in either callee-saved or caller-saved manner.
There are 3 kinds of ZA state that are defined in terms of the PSTATE.ZA
bit and the TPIDR2_EL0 register (see [1] (6.6.3)):
- "off": PSTATE.ZA == 0
- "active": PSTATE.ZA == 1 TPIDR2_EL0 == null
- "dormant": PSTATE.ZA == 1 TPIDR2_EL0 != null
As [1] (6.7.2) outlines, every subroutine has exactly one SME-interface
depending on the permitted ZA-states on entry and on normal return from
a call to this subroutine. Callers of a subroutine must know and respect
the ZA-interface of the subroutines they are using. Using a subroutine
in a way that is not permitted by its ZA-interface is undefined behaviour.
In particular, clone() and clone3() (the C library functions) have the
ZA-private interface. This means that the permitted ZA-states on entry
are "off" and "dormant" and that the permitted states on return are "off"
or "dormant" (but if and only if it was "dormant" on entry).
This means that both functions in question should correctly handle both
"off" and "dormant" ZA-states on entry. The conforming states on return
are "off" and "dormant" (if inbound state was already "dormant").
This change ensures that the ZA-state on return is always "off". Note,
that, in the context of clone() and clone3(), "on return" means a point
when execution resumes at certain address after transferring from clone()
or clone3(). For the caller (we may refer to it as "parent") this is the
return address in the link register where the RET instruction jumps. For
the "child", this is the target branch address.
So, the "off" state on return is permitted and conformant. Why can't we
retain the "dormant" state? In theory, we can, but we shouldn't, here is
why.
Every subroutine with a private-ZA interface, including clone() and clone3(),
must comply with the lazy saving scheme [1] (6.7.2). This puts additional
responsibility on a subroutine if ZA-state on return is "dormant" because
this state has special meaning. The "caller" (that is the place in code
where execution is transferred to, so this include both "parent" and "child")
may check the ZA-state and use it as per the spec of the "dormant" state that
is outlined in [1] (6.6.6 and 6.6.7).
Conforming to this would require more code inside of clone() and clone3()
which hardly is desirable.
For the return to "parent" this could be achieved in theory, but given that
neither clone() nor clone3() are supposed to be used in the middle of an
SME operation, if wouldn't be useful. For the "return" to "child" this
would be particularly difficult to achieve given the complexity of these
functions and their interfaces. Most importantly, it would be illegal
and somewhat meaningless to allow a "child" to start execution in the
"dormant" ZA-state because the very essence of the "dormant" state implies
that there is a place to return and that there is some outer context that
we are allowed to interact with.
To sum up, calling __arm_za_disable() to ensure the "off" ZA-state when the
execution resumes after a call to clone() or clone3() is correct and also
the most simple way to conform to [1].
Can there be situations when we can avoid calling __arm_za_disable()?
Calling __arm_za_disable() implies certain (sufficiently small) overhead,
so one might rightly ponder avoiding making a call to this function when
we can afford not to. The most trivial cases like this (e.g. when the
calling thread doesn't have access to SME or to the TPIDR2_EL0 register)
are already handled by this function (see [1] (8.1.3 and 8.1.2)). Reasoning
about other possible use cases would require making code inside clone() and
clone3() more complicated and it would defeat the point of trying to make
an optimisation of not calling __arm_za_disable().
Why can't the kernel do this instead?
The handling of SME state by the kernel is described in [4]. In short,
kernel must not impose a specific ZA-interface onto a userspace function.
Interaction with the kernel happens (among other thing) via system calls.
In Glibc many of the system calls (notably, including SYS_clone and
SYS_clone3) are used via wrappers, and the kernel has no control of them
and, moreover, it cannot dictate how these wrappers should behave because
it is simply outside of the kernel's remit.
However, in certain cases, the kernel may ensure that a "child" doesn't
start in an incorrect state. This is what is done by the recent change
included in 6.16 kernel [5]. This is not enough to ensure that code that
uses clone() and clone3() function conforms to [1] when it runs on a
system that provides SME, hence this change.
[1]: https://github.com/ARM-software/abi-aa/blob/main/aapcs64/aapcs64.rst
[2]: https://inbox.sourceware.org/libc-alpha/20250522114828.2291047-1-yury.khrustalev@arm.com
[3]: https://inbox.sourceware.org/libc-alpha/20250609121407.3316070-1-yury.khrustalev@arm.com
[4]: https://www.kernel.org/doc/html/v6.16/arch/arm64/sme.html
[5]: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=cde5c32db55740659fca6d56c09b88800d88fd29
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
(cherry picked from commit 27effb3d50)
(cherry picked from commit 256030b984)
(cherry picked from commit 889ae4bdbb)
A common sequence of instructions is used in several places
in assembly files, so define it in one place as an assembly
macro.
Note that PAC instructions are not included in the new macro
because they are redundant given how we call the arm_za_disable
function (return address is not saved on stack, so no need to
sign it).
(based on commits 6de12fc9ad
and c0f0db2d59)
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
(cherry picked from commit 1a0ee26714)
Add test that checks that ZA state is disabled after setjmp and sigsetjmp
Update existing SME test that uses setjmp
Reviewed-by: Wilco Dijkstra <Wilco.Dijkstra@arm.com>
(cherry picked from commit 251f932624)
(cherry picked from commit 97076e0cf1)
Due to the nature of the ZA state, setjmp() should clear it in the
same manner as it is already done by longjmp.
Reviewed-by: Wilco Dijkstra <Wilco.Dijkstra@arm.com>
(cherry picked from commit a7f6fd976c)
(cherry picked from commit 1f57ffdf35)
If the toolchain does not default to generate BTI markers in GCC,
the main program for conform runtime tests will not have the
BTI marker that -Wl,-z,force-bti requires. Without -Wl,-z,force-bti,
the link editor will not tell the dynamic linker to enable BTI,
and the missing BTI marker is harmless.
Reviewed-by: Yury Khrustalev <yury.khrustalev@arm.com>
(cherry picked from commit 75b6b263e9)
The ifunc selector for wmemset had a stray '!' in the
X86_ISA_CPU_FEATURES_ARCH_P(...) check:
if (X86_ISA_CPU_FEATURE_USABLE_P (cpu_features, AVX2)
&& X86_ISA_CPU_FEATURES_ARCH_P (cpu_features,
AVX_Fast_Unaligned_Load, !))
This effectively negated the predicate and caused the AVX2/AVX512
paths to be skipped, making the dispatcher fall back to the SSE2
implementation even on CPUs where AVX2/AVX512 are available. The
regression leads to noticeable throughput loss for wmemset.
Remove the stray '!' so the AVX_Fast_Unaligned_Load capability is
tested as intended and the correct AVX2/EVEX variants are selected.
Impact:
- On AVX2/AVX512-capable x86_64, wmemset no longer incorrectly
falls back to SSE2; perf now shows __wmemset_evex/avx2 variants.
Testing:
- benchtests/bench-wmemset shows improved bandwidth across sizes.
- perf confirm the selected symbol is no longer SSE2.
Signed-off-by: xiejiamei <xiejiamei@hygon.com>
Signed-off-by: Li jing <lijing@hygon.cn>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
(cherry picked from commit 4d86b6cdd8)
The break statement in CHECK_MERGE is expected to exit the surrounding
while loop, not the do-while loop with in the macro. Remove the
do-while loop from the macro. It is not needed to turn the macro
expansion into a single statement due to the way CHECK_MERGE is used
(and the statement expression would cover this anyway).
Reviewed-by: Collin Funk <collin.funk1@gmail.com>
(cherry picked from commit 0fceed2545)
Fix a bug in predicate logic introduced in last change.
A slight performance improvement from relying on all true
predicates during conversion from single to double.
This fixes BZ #33299.
Reviewed-by: Wilco Dijkstra <Wilco.Dijkstra@arm.com>
(cherry picked from commit aac077645a)
A static analyzer apparently reported an uninitialized use of the
variable result in sem_open in the case where the file is required to
exist but does not exist.
The report appears to be correct; set result to SEM_FAILED in that
case, and add a test for it.
Note: the test passes for me even without the sem_open fix, I guess
because result happens to get value SEM_FAILED (i.e. 0) when
uninitialized.
Tested for x86_64.
(cherry picked from commit f745d78e26)
These variables are not exported, and libc.so TLS is initial-exec
anyway. Declare these variables as hidden and use the initial-exec
TLS model.
Reviewed-by: Frédéric Bérat <fberat@redhat.com>
(cherry picked from commit a894f04d87)
On i386, programs and shared libraries with __thread usage may fail
silently at run-time against glibc without the TLS run-time fix for:
https://sourceware.org/bugzilla/show_bug.cgi?id=32996
Add GLIBC_ABI_GNU_TLS version to indicate that glibc has the working
GNU TLS run-time. Linker can add the GLIBC_ABI_GNU_TLS version to
binaries which depend on the working TLS run-time so that such programs
and shared libraries will fail to load and run at run-time against
libc.so without the GLIBC_ABI_GNU_TLS version, instead of fail silently
at random.
This fixes BZ #33221.
Signed-off-by: H.J. Lu <hjl.tools@gmail.com>
Reviewed-by: Sam James <sam@gentoo.org>
(cherry picked from commit ed1b7a5a48)
The test was added in commit ac8cc9e300
without all the required Makefile scaffolding. Tweak the test
so that it actually builds (including with dynamic SIGSTKSZ).
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
(cherry picked from commit 4b7cfcc3fb)
Compiler generates the following instruction sequence for dynamic TLS
access:
leal tls_var@tlsgd(,%ebx,1), %eax
call ___tls_get_addr@PLT
CALL instruction is transparent to compiler which assumes all registers,
except for EFLAGS, AX, CX, and DX, are unchanged after CALL. But
___tls_get_addr is a normal function which doesn't preserve any vector
registers.
1. Rename the generic __tls_get_addr function to ___tls_get_addr_internal.
2. Change ___tls_get_addr to a wrapper function with implementations for
FNSAVE, FXSAVE, XSAVE and XSAVEC to save and restore all vector registers.
3. dl-tlsdesc-dynamic.h has:
_dl_tlsdesc_dynamic:
/* Like all TLS resolvers, preserve call-clobbered registers.
We need two scratch regs anyway. */
subl $32, %esp
cfi_adjust_cfa_offset (32)
It is wrong to use
movl %ebx, -28(%esp)
movl %esp, %ebx
cfi_def_cfa_register(%ebx)
...
mov %ebx, %esp
cfi_def_cfa_register(%esp)
movl -28(%esp), %ebx
to preserve EBX on stack. Fix it with:
movl %ebx, 28(%esp)
movl %esp, %ebx
cfi_def_cfa_register(%ebx)
...
mov %ebx, %esp
cfi_def_cfa_register(%esp)
movl 28(%esp), %ebx
4. Update _dl_tlsdesc_dynamic to call ___tls_get_addr_internal directly.
5. Add have-test-mtls-traditional to compile tst-tls23-mod.c with
traditional TLS variant to verify the fix.
6. Define DL_RUNTIME_RESOLVE_REALIGN_STACK in sysdeps/x86/sysdep.h.
This fixes BZ #32996.
Co-Authored-By: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Signed-off-by: H.J. Lu <hjl.tools@gmail.com>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
(cherry picked from commit 848f0e46f0)
Add "mtls_descriptor=desc" to preconfigure.ac and regenerate preconfigure.
Fix failure: elf/tst-gnu2-tls2.
Reported-by: Joseph S. Myers <josmyers@redhat.com>
Reported-by: Andreas K. Huettel <dilfridge@gentoo.org>
(cherry picked from commit d4cdb601df)
This ensures that the compiler will not inline it, so that
debuggers which do not use the Systemtap probes can reliably
set a breakpoint on it.
Reviewed-by: Andreas K. Huettel <dilfridge@gentoo.org>
Tested-by: Andreas K. Huettel <dilfridge@gentoo.org>
(cherry picked from commit 620f0730f3)
The changes in commit a93d9e03a3
("Extend struct r_debug to support multiple namespaces [BZ #15971]")
break the dyninst dynamic instrumentation tool. It brings its
own definition of _r_debug (rather than a declaration).
Furthermore, it turns out it is rather hard to use the proposed
handshake for accessing _r_debug via DT_DEBUG. If applications want
to access _r_debug, they can do so directly if the relevant code has
been built as PIC. To protect against harm from accidental copy
relocations due to linker relaxations, this commit restores copy
relocation support by adjusting both copies if interposition or
copy relocations are in play. Therefore, it is possible to
use a hidden reference in ld.so to access _r_debug.
Only perform the copy relocation initialization if libc has been
loaded. Otherwise, the ld.so search scope can be empty, and the
lookup of the _r_debug symbol mail fail.
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
(cherry picked from commit ea85e7d550)
It combines updating r_state with the debugger notification.
The second change to _dl_open introduces an additional debugger
notification for dlmopen, but debuggers are expected to ignore it.
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
(cherry picked from commit 8329939a37)
It replaces the ns_debug member of the namespaces. Previously,
the base namespace had an unused ns_debug member.
This change also fixes a concurrency issue: Now _dl_debug_initialize
only updates r_next of the previous namespace's r_debug after the new
r_debug is initialized, so that only the initialized version is
observed. (Client code accessing _r_debug will benefit from load
dependency tracking in CPUs even without explicit barriers.)
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
(cherry picked from commit 7278d11f3a)
This call must not complete initialization of all shared objects
in the global scope because the ELF constructor which makes the call
likely has not finished initialization. Calling more constructors
at this point would expose those to a partially constructed
dependency.
This completes the revert of commit 9897ced8e7
("elf: Run constructors on cyclic recursive dlopen (bug 31986)").
(cherry picked from commit d604f9c500)
Commit 8f8dd904c4 (“elf:
rtld_multiple_ref is always true”) removed some code that happened
to enable compatibility with programs that do not link against
libc.so. Such programs cannot call dlopen or any dynamic linker
functions (except __tls_get_addr), so this is not really useful.
Still ld.so should not crash with a null-pointer dereference
or undefined symbol reference in these cases.
In the main relocation loop, call _dl_relocate_object unconditionally
because it already checks if the object has been relocated.
If libc.so was loaded, self-relocate ld.so against it and call
__rtld_mutex_init and __rtld_malloc_init_real to activate the full
implementations. Those are available only if libc.so is there,
so skip these initialization steps if libc.so is absent. Without
libc.so, the global scope can be completely empty. This can cause
ld.so self-relocation to fail because if it uses symbol-based
relocations, which is why the second ld.so self-relocation is not
performed if libc.so is missing.
The previous concern regarding GOT updates through self-relocation
no longer applies because function pointers are updated
explicitly through __rtld_mutex_init and __rtld_malloc_init_real,
and not through relocation. However, the second ld.so self-relocation
is still delayed, in case there are other symbols being used.
Fixes commit 8f8dd904c4 (“elf:
rtld_multiple_ref is always true”).
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
(cherry picked from commit 706209867f)
This was found through code inspection. No application impact is
known.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
(cherry picked from commit 46d3198094)
This was discovered after extending elf/tst-audit23 to cover
dlclose of the dlmopen namespace.
Auditors already experience the new order during process
shutdown (_dl_fini), so no LAV_CURRENT bump or backwards
compatibility code seems necessary.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
(cherry picked from commit 495b96e064)
Previously, the ld.so link map was silently added to the namespace.
This change produces an auditing event for it.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
(cherry picked from commit 8f36b14696)
After commit 1d5024f4f0
("support: Build with exceptions and asynchronous unwind tables
[BZ #30587]"), libgcc_s is expected to show up in the DSO
list on 32-bit Arm. Do not update max_objs because vdso is not
tracked (and which is the reason why the test currently passes
even with libgcc_s present).
Also write the log output from the auditor to standard output,
for easier test debugging.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
(cherry picked from commit 4a50fdf8b2)
Before commit ee1ada1bdb
("elf: Rework exception handling in the dynamic loader
[BZ #25486]"), the previous order called the main calloc
to allocate a shadow GOT/PLT array for auditing support.
This happened before libc.so.6 ELF constructors were run, so
a user malloc could run without libc.so.6 having been
initialized fully. One observable effect was that
environ was NULL at this point.
It does not seem to be possible at present to trigger such
an allocation, but it seems more robust to delay switching
to main malloc after ld.so self-relocation is complete.
The elf/tst-rtld-no-malloc-audit test case fails with a
2.34-era glibc that does not have this fix.
Reviewed-by: DJ Delorie <dj@redhat.com>
(cherry picked from commit c1560f3f75)
This avoids surprises when refactoring the code if these identifiers
are re-used later in the file.
Reviewed-by: DJ Delorie <dj@redhat.com>
(cherry picked from commit a796422045)
For a long time, libc.so.6 has dependend on ld.so, which
means that there is a reference to ld.so in all processes,
and rtld_multiple_ref is always true. In fact, if
rtld_multiple_ref were false, some of the ld.so setup code
would not run.
Reviewed-by: DJ Delorie <dj@redhat.com>
(cherry picked from commit 8f8dd904c4)
The refactoring did not take the change of variable into account.
Fixes commit 43db5e2c06
("elf: Signal RT_CONSISTENT after relocation processing in dlopen
(bug 31986)").
(cherry picked from commit ac73067cb7)
Previously, a la_activity audit event was generated before
relocation processing completed. This does did not match what
happened during initial startup in elf/rtld.c (towards the end
of dl_main). It also caused various problems if an auditor
tried to open the same shared object again using dlmopen:
If it was the directly loaded object, it had a search scope
associated with it, so the early exit in dl_open_worker_begin
was taken even though the object was unrelocated. This caused
the r_state == RT_CONSISTENT assert to fail. Avoidance of the
assert also depends on reversing the order of r_state update
and auditor event (already implemented in a previous commit).
At the later point, args->map can be NULL due to failure,
so use the assigned namespace ID instead if that is available.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
(cherry picked from commit 43db5e2c06)
Auditors can call into the dynamic loader again if
LA_ACT_CONSISTENT, and those recursive calls could observe
r_state != RT_CONSISTENT.
We should consider failing dlopen/dlmopen/dlclose if
r_state != RT_CONSISTENT. The dynamic linker is probably not
in a state in which it can handle reentrant calls. This
needs further investigation.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
(cherry picked from commit e096b7a189)
This is conceptually similar to the reported bug, but does not
depend on auditing. The fix is simple: just complete execution
of the constructors. This exposed the fact that the link map
for statically linked executables does not have l_init_called
set, even though constructors have run.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
(cherry picked from commit 9897ced8e7)
When the linker -z mark-plt option is used to add DT_X86_64_PLT,
DT_X86_64_PLTSZ and DT_X86_64_PLTENT, the r_addend field of the
R_X86_64_JUMP_SLOT relocation stores the offset of the indirect
branch instruction. However, glibc versions without the commit:
commit f8587a6189
Author: H.J. Lu <hjl.tools@gmail.com>
Date: Fri May 20 19:21:48 2022 -0700
x86-64: Ignore r_addend for R_X86_64_GLOB_DAT/R_X86_64_JUMP_SLOT
According to x86-64 psABI, r_addend should be ignored for R_X86_64_GLOB_DAT
and R_X86_64_JUMP_SLOT. Since linkers always set their r_addends to 0, we
can ignore their r_addends.
Reviewed-by: Fangrui Song <maskray@google.com>
won't ignore the r_addend value in the R_X86_64_JUMP_SLOT relocation.
Such programs and shared libraries will fail at run-time randomly.
Add GLIBC_ABI_DT_X86_64_PLT version to indicate that glibc is compatible
with DT_X86_64_PLT.
The linker can add the glibc GLIBC_ABI_DT_X86_64_PLT version dependency
whenever -z mark-plt is passed to the linker. The resulting programs and
shared libraries will fail to load at run-time against libc.so without the
GLIBC_ABI_DT_X86_64_PLT version, instead of fail randomly.
This fixes BZ #33212.
Signed-off-by: H.J. Lu <hjl.tools@gmail.com>
Reviewed-by: Sam James <sam@gentoo.org>
(cherry picked from commit 399384e0c8)
Programs and shared libraries compiled with -mtls-dialect=gnu2 may fail
silently at run-time against glibc without the GNU2 TLS run-time fix
for:
https://sourceware.org/bugzilla/show_bug.cgi?id=31372
Add GLIBC_ABI_GNU2_TLS version to indicate that glibc has the working
GNU2 TLS run-time. Linker can add the GLIBC_ABI_GNU2_TLS version to
binaries which depend on the working GNU2 TLS run-time:
https://sourceware.org/bugzilla/show_bug.cgi?id=33130
so that such programs and shared libraries will fail to load and run at
run-time against libc.so without the GLIBC_ABI_GNU2_TLS version, instead
of fail silently at random.
This fixes BZ #33129.
Signed-off-by: H.J. Lu <hjl.tools@gmail.com>
Reviewed-by: Sam James <sam@gentoo.org>
(cherry picked from commit 9df8fa397d)
More routines are to follow, some of which hit many failures in the
current testsuite due to wrong sign of zero (mathvec routines are not
required to get this right). Instead of disabling a large number of
tests, change the failure condition such that, for vector routines,
tests pass as long as computed == expected == 0.0, regardless of sign.
Affected tests (vector tests for expm1, log1p, sin, tan and tanh) all
still pass.
(cherry picked from commit 939e770e01)
Commit 10a66a8e42 ("Remove <libc-tsd.h>") removed the TLS initial-exec
(IE) model attribute from the __libc_tsd_CTYPE_* thread variable declarations
and definitions. Commit a894f04d87 ("Optimize __libc_tsd_* thread
variable access") restored it on declarations.
Restore the TLS initial-exec model attribute on __libc_tsd_CTYPE_* thread
variable definitions.
This resolves test tst-locale1 failure on s390 32-bit, when using a
GNU linker without the fix from GNU binutils commit aefebe82dc89
("IBM zSystems: Fix offset relative to static TLS").
Reviewed-by: Florian Weimer <fweimer@redhat.com>
(cherry picked from commit e5363e6f46)
This ensures that the ctype data pointers in TLS are valid
in secondary namespaces even without initialization via
__ctype_init.
Reviewed-by: Frédéric Bérat <fberat@redhat.com>
(cherry picked from commit 2745db8dd3)
The existing initializers already contain explicit casts. Keep them
due to int/uint32_t mismatch.
Reviewed-by: Frédéric Bérat <fberat@redhat.com>
(cherry picked from commit e0c0f856f5)
Use __thread variables directly instead. The macros do not save any
typing. It seems unlikely that a future port will lack __thread
variable support.
Some of the __libc_tsd_* variables are referenced from assembler
files, so keep their names. Previously, <libc-tls.h> included
<tls.h>, which in turn included <errno.h>, so a few direct includes
of <errno.h> are now required.
Reviewed-by: Frédéric Bérat <fberat@redhat.com>
(cherry picked from commit 10a66a8e42)
Detect if ld.so not contiguous and handle that case in _dl_find_object.
Set l_find_object_processed even for initially loaded link maps,
otherwise dlopen of an initially loaded object adds it to
_dlfo_loaded_mappings (where maps are expected to be contiguous),
in addition to _dlfo_nodelete_mappings.
Test elf/tst-link-map-contiguous-ldso iterates over the loader
image, reading every word to make sure memory is actually mapped.
It only does that if the l_contiguous flag is set for the link map.
Otherwise, it finds gaps with mmap and checks that _dl_find_object
does not return the ld.so mapping for them.
The test elf/tst-link-map-contiguous-main does the same thing for
the libc.so shared object. This only works if the kernel loaded
the main program because the glibc dynamic loader may fill
the gaps with PROT_NONE mappings in some cases, making it contiguous,
but accesses to individual words may still fault.
Test elf/tst-link-map-contiguous-libc is again slightly different
because the dynamic loader always fills the gaps with PROT_NONE
mappings, so a different form of probing has to be used.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
(cherry picked from commit 20681be149)
Remove historic binutils reference from comment and update
how this data is used by applications.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
(cherry picked from commit 2cac9559e0)
This reduces code size and dependencies on ld.so internals from
libc.so.
Fixes commit f4c142bb9f
("arm: Use _dl_find_object on __gnu_Unwind_Find_exidx (BZ 31405)").
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
(cherry picked from commit 96429bcc91)
Improve codegen by packing coefficients.
4% and 2% improvement in throughput microbenchmark on Neoverse V1, for acosh
and atanh respectively.
Reviewed-by: Wilco Dijkstra <Wilco.Dijkstra@arm.com>
(cherry picked from commit 6849c5b791)
Reworke SVE FP64 hyperbolics to use the SVE FEXPA
instruction.
Also update the special case handelling for large
inputs to be entirely vectorised.
Performance improvements on Neoverse V1:
cosh_sve: 19% for |x| < 709, 5x otherwise
sinh_sve: 24% for |x| < 709, 5.9x otherwise
tanh_sve: 12% for |x| < 19, 9x otherwise
Reviewed-by: Wilco Dijkstra <Wilco.Dijkstra@arm.com>
(cherry picked from commit dee22d2a81)
Improve performance of SVE exps by making better use
of the SVE FEXPA instruction.
Performance improvement on Neoverse V1:
exp2_sve: 21%
exp2f_sve: 24%
exp10f_sve: 23%
expm1_sve: 25%
Reviewed-by: Wilco Dijkstra <Wilco.Dijkstra@arm.com>
(cherry picked from commit 1e3d1ddf97)
Improve performance of Inverse trig functions by altering how coefficients are
loaded.
Performance improvement on Neoverse V1:
SVE acos 14%
AdvSIMD acos 6%
AdvSIMD asin 6%
SVE asin 5%
AdvSIMD asinf 2%
AdvSIMD atanf 22%
SVE atanf 20%
SVE atan 11%
AdvSIMD atan 5%
SVE atan2 7%
SVE atan2f 4%
AdvSIMD atan2f 3%
AdvSIMD atan2 2%
Reviewed-by: Wilco Dijkstra <Wilco.Dijkstra@arm.com>
(cherry picked from commit 1e84509e00)
Polynomial order was unnecessarily high, unlocking multiple
optimizations.
Max error for new SVE expf is 0.88 +0.5ULP.
Max error for new SVE coshf is 2.56 +0.5ULP.
Performance improvement on Neoverse V1: expf (30%), coshf (26%).
Reviewed-by: Wilco Dijkstra <Wilco.Dijkstra@arm.com>
(cherry picked from commit cf56eb28fa)
During early startup memcpy or memset must not be called since many targets
use ifuncs for them which won't be initialized yet. Security hardening may
use -ftrivial-auto-var-init=zero which inserts calls to memset. Redirect
memset to memset_generic by including dl-symbol-redir-ifunc.h in cpu-features.c.
This fixes BZ #33112.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
(cherry picked from commit 681a24ae4d)
If a memory allocation failure occurs during bracket expression
parsing in regcomp, a double-free error may result.
Reported-by: Anastasia Belova <abelova@astralinux.ru>
Co-authored-by: Paul Eggert <eggert@cs.ucla.edu>
Reviewed-by: Andreas K. Huettel <dilfridge@gentoo.org>
(cherry picked from commit 7ea06e9940)
And simplify the interface of support_capture_subprogram_self_sgid.
Use the existing framework for temporary directories (now with
mode 0700) and directory/file deletion. Handle all execution
errors within support_capture_subprogram_self_sgid. In particular,
this includes test failures because the invoked program did not
exit with exit status zero. Existing tests that expect exit
status 42 are adjusted to use zero instead.
In addition, fix callers not to call exit (0) with test failures
pending (which may mask them, especially when running with --direct).
Fixes commit 35fc356fa3
("elf: Fix subprocess status handling for tst-dlopen-sgid (bug 32987)").
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
(cherry picked from commit 3a3fb2ed83)
When running as root, it is likely that we can run under any group.
Pick a harmless group from /etc/group in this case.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
(cherry picked from commit 2f769cec44)
This reverts commit 3367d8e180
Reason for revert: Power10 strcmp clobbers non-volatile vector
registers (Bug 33056)
Tested on ppc64le without regression.
(cherry picked from commit 15808c77b3)
This reverts commit b9182c793c
Reason for revert: Power10 memchr clobbers v20 vector register
(Bug 33059)
This is not a security issue, unlike CVE-2025-5745 and
CVE-2025-5702.
Tested on ppc64le without regression.
(cherry picked from commit a7877bb668)
This reverts commit 90bcc8721e
This change is in the chain of the final revert that fixes the CVE
i.e. 3367d8e180
Reason for revert: Power10 strcmp clobbers non-volatile vector
registers (Bug 33056)
Tested on ppc64le with no regressions.
(cherry picked from commit c22de63588)
This reverts commit 23f0d81608
Reason for revert: Power10 strncmp clobbers non-volatile vector
registers (Bug 33060)
Tested on ppc64le with no regressions.
(cherry picked from commit 63c60101ce)
Check that LD_LIBRARY_PATH is ignored for AT_SECURE statically
linked binaries, using support_capture_subprogram_self_sgid.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
(cherry picked from commit d8f7a79335)
The function does not modify the passed-in string, so make this clear
via the prototype.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
(cherry picked from commit f0c09fe616)
If an auditor loads many TLS-using modules during startup, it is
possible to trigger DTV resizing. Previously, the DTV was marked
as allocated by the main malloc afterwards, even if the minimal
malloc was still in use. With this change, _dl_resize_dtv marks
the resized DTV as allocated with the minimal malloc.
The new test reuses TLS-using modules from other auditing tests.
Reviewed-by: DJ Delorie <dj@redhat.com>
(cherry picked from commit aa3d7bd529)
tst-popen-fork failed to build for Hurd due to not being linked with
libpthread. This commit fixes that.
Tested with build-many-glibcs.py for i686-gnu.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
(cherry picked from commit 6a290b2895)
popen modifies its file handler book-keeping under a lock that wasn't
being taken during fork. This meant that a concurrent popen and fork
could end up copying the lock in a "locked" state into the fork child,
where subsequently calling popen would lead to a deadlock due to the
already (spuriously) held lock.
This commit fixes the deadlock by appropriately taking the lock before
fork, and releasing/resetting it in the parent/child after the fork.
A new test for concurrent popen and fork is also added. It consistently
hangs (and therefore fails via timeout) without the fix applied.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
(cherry picked from commit 9f0d2c0ee6)
The new initializer and struct layout does not initialize the
__g_signals field in the old struct layout before the change in
commit c36fc50781 ("nptl: Remove
g_refs from condition variables"). Bring back fields at the end
of struct __pthread_cond_s, so that they are again zero-initialized.
Reviewed-by: Sam James <sam@gentoo.org>
The LSB of g_signals was unused. The LSB of g1_start was used to indicate
which group is G2. This was used to always go to sleep in pthread_cond_wait
if a waiter is in G2. A comment earlier in the file says that this is not
correct to do:
"Waiters cannot determine whether they are currently in G2 or G1 -- but they
do not have to because all they are interested in is whether there are
available signals"
I either would have had to update the comment, or get rid of the check. I
chose to get rid of the check. In fact I don't quite know why it was there.
There will never be available signals for group G2, so we didn't need the
special case. Even if there were, this would just be a spurious wake. This
might have caught some cases where the count has wrapped around, but it
wouldn't reliably do that, (and even if it did, why would you want to force a
sleep in that case?) and we don't support that many concurrent waiters
anyway. Getting rid of it allows us to use one more bit, making us more
robust to wraparound.
Signed-off-by: Malte Skarupke <malteskarupke@fastmail.fm>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
(cherry picked from commit 91bb902f58)
This function no longer waits for threads to leave g1, so rename it to
__condvar_switch_g1
Signed-off-by: Malte Skarupke <malteskarupke@fastmail.fm>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
(cherry picked from commit 4b79e27a50)
In my previous change I turned a nested loop into a simple loop. I'm doing
the resulting indentation changes in a separate commit to make the diff on
the previous commit easier to review.
Signed-off-by: Malte Skarupke <malteskarupke@fastmail.fm>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
(cherry picked from commit ee6c14ed59)
The loop was a little more complicated than necessary. There was only one
break statement out of the inner loop, and the outer loop was nearly empty.
So just remove the outer loop, moving its code to the one break statement in
the inner loop. This allows us to replace all gotos with break statements.
Signed-off-by: Malte Skarupke <malteskarupke@fastmail.fm>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
(cherry picked from commit 929a4764ac)
This variable used to be needed to wait in group switching until all sleepers
have confirmed that they have woken. This is no longer needed. Nothing waits
on this variable so there is no need to track how many threads are currently
asleep in each group.
Signed-off-by: Malte Skarupke <malteskarupke@fastmail.fm>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
(cherry picked from commit c36fc50781)
pthread_cond_wait was checking whether it was in a closed group no less than
four times. Checking once is enough. Here are the four checks:
1. While spin-waiting. This was dead code: maxspin is set to 0 and has been
for years.
2. Before deciding to go to sleep, and before incrementing grefs: I kept this
3. After incrementing grefs. There is no reason to think that the group would
close while we do an atomic increment. Obviously it could close at any
point, but that doesn't mean we have to recheck after every step. This
check was equally good as check 2, except it has to do more work.
4. When we find ourselves in a group that has a signal. We only get here after
we check that we're not in a closed group. There is no need to check again.
The check would only have helped in cases where the compare_exchange in the
next line would also have failed. Relying on the compare_exchange is fine.
Removing the duplicate checks clarifies the code.
Signed-off-by: Malte Skarupke <malteskarupke@fastmail.fm>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
(cherry picked from commit 4f7b051f8e)
This wake is unnecessary. We only switch groups after every sleeper in a group
has been woken. Sure, they may take a while to actually wake up and may still
hold a reference, but waking them a second time doesn't speed that up. Instead
this just makes the code more complicated and may hide problems.
In particular this safety wake wouldn't even have helped with the bug that was
fixed by Barrus' patch: The bug there was that pthread_cond_signal would not
switch g1 when it should, so we wouldn't even have entered this code path.
Signed-off-by: Malte Skarupke <malteskarupke@fastmail.fm>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
(cherry picked from commit b42cc6af11)
Some comments were wrong after the most recent commit. This fixes that.
Also fixing indentation where it was using spaces instead of tabs.
Signed-off-by: Malte Skarupke <malteskarupke@fastmail.fm>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
(cherry picked from commit 0cc973160c)
This fixes the lost wakeup (from a bug in signal stealing) with a change
in the usage of g_signals[] in the condition variable internal state.
It also completely eliminates the concept and handling of signal stealing,
as well as the need for signalers to block to wait for waiters to wake
up every time there is a G1/G2 switch. This greatly reduces the average
and maximum latency for pthread_cond_signal.
The g_signals[] field now contains a signal count that is relative to
the current g1_start value. Since it is a 32-bit field, and the LSB is
still reserved (though not currently used anymore), it has a 31-bit value
that corresponds to the low 31 bits of the sequence number in g1_start.
(since g1_start also has an LSB flag, this means bits 31:1 in g_signals
correspond to bits 31:1 in g1_start, plus the current signal count)
By making the signal count relative to g1_start, there is no longer
any ambiguity or A/B/A issue, and thus any checks before blocking,
including the futex call itself, are guaranteed not to block if the G1/G2
switch occurs, even if the signal count remains the same. This allows
initially safely blocking in G2 until the switch to G1 occurs, and
then transitioning from G1 to a new G1 or G2, and always being able to
distinguish the state change. This removes the race condition and A/B/A
problems that otherwise ocurred if a late (pre-empted) waiter were to
resume just as the futex call attempted to block on g_signal since
otherwise there was no last opportunity to re-check things like whether
the current G1 group was already closed.
By fixing these issues, the signal stealing code can be eliminated,
since there is no concept of signal stealing anymore. The code to block
for all waiters to exit g_refs can also be removed, since any waiters
that are still in the g_refs region can be guaranteed to safely wake
up and exit. If there are still any left at this time, they are all
sent one final futex wakeup to ensure that they are not blocked any
longer, but there is no need for the signaller to block and wait for
them to wake up and exit the g_refs region.
The signal count is then effectively "zeroed" but since it is now
relative to g1_start, this is done by advancing it to a new value that
can be observed by any pending blocking waiters. Any late waiters can
always tell the difference, and can thus just cleanly exit if they are
in a stale G1 or G2. They can never steal a signal from the current
G1 if they are not in the current G1, since the signal value that has
to match in the cmpxchg has the low 31 bits of the g1_start value
contained in it, and that's first checked, and then it won't match if
there's a G1/G2 change.
Note: the 31-bit sequence number used in g_signals is designed to
handle wrap-around when checking the signal count, but if the entire
31-bit wraparound (2 billion signals) occurs while there is still a
late waiter that has not yet resumed, and it happens to then match
the current g1_start low bits, and the pre-emption occurs after the
normal "closed group" checks (which are 64-bit) but then hits the
futex syscall and signal consuming code, then an A/B/A issue could
still result and cause an incorrect assumption about whether it
should block. This particular scenario seems unlikely in practice.
Note that once awake from the futex, the waiter would notice the
closed group before consuming the signal (since that's still a 64-bit
check that would not be aliased in the wrap-around in g_signals),
so the biggest impact would be blocking on the futex until the next
full wakeup from a G1/G2 switch.
Signed-off-by: Frank Barrus <frankbarrus_sw@shaggy.cc>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
(cherry picked from commit 1db84775f8)
Detect Intel Diamond Rapids and tune it similar to Intel Granite Rapids.
Signed-off-by: H.J. Lu <hjl.tools@gmail.com>
Reviewed-by: Sunil K Pandey <skpgkp2@gmail.com>
(cherry picked from commit de14f1959e)
Enable default tuning for unknown Intel processor.
Tested on x86, no regression.
Co-Authored-By: H.J. Lu <hjl.tools@gmail.com>
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
(cherry picked from commit 9f0deff558)
- Add ARROWLAKE model detection.
- Add PANTHERLAKE model detection.
- Add CLEARWATERFOREST model detection.
Intel® Architecture Instruction Set Extensions Programming Reference
https://cdrdv2.intel.com/v1/dl/getContent/671368 Section 1.2.
No regression, validated model detection on SDE.
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
(cherry picked from commit e53eb952b9)
Scan xstate IDs up to the maximum supported xstate ID. Remove the
separate AMX xstate calculation. Instead, exclude the AMX space from
the start of TILECFG to the end of TILEDATA in xsave_state_size.
Completed validation on SKL/SKX/SPR/SDE and compared xsave state size
with "ld.so --list-diagnostics" option, no regression.
Co-Authored-By: H.J. Lu <hjl.tools@gmail.com>
Reviewed-by: Sunil K Pandey <skpgkp2@gmail.com>
(cherry picked from commit 70b6488551)
This is just a refactor and there should be no behavioral change from
this commit.
The goal is to make `Avoid_Non_Temporal_Memset` a more universal knob
for controlling whether we use non-temporal memset rather than having
extra logic based on vendor.
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
(cherry picked from commit b93dddfaf4)
This fixes a test build failure on Hurd.
Fixes commit 145097dff1 ("x86: Use separate
variable for TLSDESC XSAVE/XSAVEC state size (bug 32810)").
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
(cherry picked from commit c6e2895695)
Previously, the initialization code reused the xsave_state_full_size
member of struct cpu_features for the TLSDESC state size. However,
the tunable processing code assumes that this member has the
original XSAVE (non-compact) state size, so that it can use its
value if XSAVEC is disabled via tunable.
This change uses a separate variable and not a struct member because
the value is only needed in ld.so and the static libc, but not in
libc.so. As a result, struct cpu_features layout does not change,
helping a future backport of this change.
Fixes commit 9b7091415a ("x86-64:
Update _dl_tlsdesc_dynamic to preserve AMX registers").
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
(cherry picked from commit 145097dff1)
If we have to use XSAVE or XSAVEC trampolines, do not adjust the size
information they need. Technically, it is an operator error to try to
run with -XSAVE,-XSAVEC on such builds, but this change here disables
some unnecessary code with higher ISA levels and simplifies testing.
Related to commit befe2d3c4d
("x86-64: Don't use SSE resolvers for ISA level 3 or above").
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
(cherry picked from commit 59585ddaa2)
On SPR, it improves atanh bench performance by:
Before After Improvement
reciprocal-throughput 15.1715 14.8628 2%
latency 57.1941 56.1883 2%
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
(cherry picked from commit c7c4a5906f)
On SPR, it improves sinh bench performance by:
Before After Improvement
reciprocal-throughput 14.2017 11.815 17%
latency 36.4917 35.2114 4%
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
(cherry picked from commit dded0d20f6)
On Skylake, it improves tanh bench performance by:
Before After Improvement
max 110.89 95.826 14%
min 20.966 20.157 4%
mean 30.9601 29.8431 4%
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
(cherry picked from commit c6352111c7)
Due to the extensible nature of the rseq area we can't explictly
initialize fields that are not part of the ABI yet. It was agreed with
upstream that all new fields will be documented as zero initialized by
userspace. Future kernels configured with CONFIG_DEBUG_RSEQ will
validate the content of all fields during registration.
Replace the explicit field initialization with a memset of the whole
rseq area which will cover fields as they are added to future kernels.
Signed-off-by: Michael Jeanson <mjeanson@efficios.com>
Reviewed-by: Florian Weimer <fweimer@redhat.com>
(cherry picked from commit 689a62a421)
GCC aligns global data to 16 bytes if their size is >= 16 bytes. This patch
changes the exp_data struct slightly so that the fields are better aligned
and without gaps. As a result on targets that support them, more load-pair
instructions are used in exp. Exp10 is improved by moving invlog10_2N later
so that neglog10_2hiN and neglog10_2loN can be loaded using load-pair.
The exp benchmark improves 2.5%, "144bits" by 7.2%, "768bits" by 12.7% on
Neoverse V2. Exp10 improves by 1.5%.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
(cherry picked from commit 5afaf99edb)
Add SVE memset based on the generic memset with predicated load for sizes < 16.
Unaligned memsets of 128-1024 are improved by ~20% on average by using aligned
stores for the last 64 bytes. Performance of random memset benchmark improves
by ~2% on Neoverse V1.
Reviewed-by: Yury Khrustalev <yury.khrustalev@arm.com>
(cherry picked from commit 163b1bbb76)
GCC aligns global data to 16 bytes if their size is >= 16 bytes. This patch
changes the exp2f_data struct slightly so that the fields are better aligned.
As a result on targets that support them, load-pair instructions accessing
poly_scaled and invln2_scaled are now 16-byte aligned.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
(cherry picked from commit 44fa9c1080)
Remove ZVA 128 support from memset - the new memset no longer
guarantees count >= 256, which can result in underflow and a
crash if ZVA size is 128 ([1]). Since only one CPU uses a ZVA
size of 128 and its memcpy implementation was removed in commit
e162ab2bf1, remove this special
case too.
[1] https://sourceware.org/pipermail/libc-alpha/2024-November/161626.html
Reviewed-by: Andrew Pinski <quic_apinski@quicinc.com>
(cherry picked from commit a08d9a52f9)
Improve small memsets by avoiding branches and use overlapping stores.
Use DC ZVA for copies over 128 bytes. Remove unnecessary code for ZVA sizes
other than 64 and 128. Performance of random memset benchmark improves by 24%
on Neoverse N1.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
(cherry picked from commit cec3aef324)
Improve performance by handling another 16 bytes before entering the loop.
Use ADDHN in the loop to avoid SHRN+FMOV when it terminates. Change final
size computation to avoid increasing latency. On Neoverse V1 performance
of the random strlen benchmark improves by 4.6%.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
(cherry picked from commit 3dc426b642)
Reduce number of MOV/MOVPRFXs and use unpredicated FMUL.
Replace MUL with LSL. Speedup on Neoverse V1: 6%.
Reviewed-by: Wilco Dijkstra <Wilco.Dijkstra@arm.com>
(cherry picked from commit f5ff34cb3c)
Use unpredicted muls, and improve memory access.
7%, 3% and 1% improvement in throughput microbenchmark on Neoverse V1,
for exp, exp2 and cosh respectively.
Reviewed-by: Wilco Dijkstra <Wilco.Dijkstra@arm.com>
(cherry picked from commit c0ff447edf)
Use unpredicated muls, use lanewise mla's and improve memory access.
1% regression in throughput microbenchmark on Neoverse V1.
Reviewed-by: Wilco Dijkstra <Wilco.Dijkstra@arm.com>
(cherry picked from commit 8f0e7fe61e)
Use unpredicated muls, use absolute compare and improve memory access.
Expm1f, sinhf and tanhf show 7%, 5% and 1% improvement in throughput
microbenchmark on Neoverse V1.
(cherry picked from commit f86b4cf875)
Reduce memory access by using lanewise MLA and reduce number of MOVPRFXs.
Move log1pf implementation to inline helper function.
Speedup on Neoverse V1 for log1pf (10%), acoshf (-1%), atanhf (2%), asinhf (2%).
(cherry picked from commit 91c1fadba3)
Reduce memory access by using lanewise MLA and moving constants to struct
and reduce number of MOVPRFXs.
Update maximum ULP error for double log_sve from 1 to 2.
Speedup on Neoverse V1 for log (3%), log2 (5%), and log10 (4%).
(cherry picked from commit 32d193a372)
Load the polynomial evaluation coefficients into 2 vectors and use lanewise MLAs.
Also use intrinsics instead of native operations.
expf: 3% improvement in throughput microbenchmark on Neoverse V1, exp2f: 5%,
exp10f: 13%, coshf: 14%.
Reviewed-by: Wilco Dijkstra <Wilco.Dijkstra@arm.com>
(cherry picked from commit cff9648d0b)
Load the polynomial evaluation coefficients into 2 vectors and use lanewise MLAs.
8% improvement in throughput microbenchmark on Neoverse V1.
Reviewed-by: Wilco Dijkstra <Wilco.Dijkstra@arm.com>
(cherry picked from commit 6914774b9d)
Load the polynomial evaluation coefficients into 2 vectors and use lanewise MLAs.
8% improvement in throughput microbenchmark on Neoverse V1 for log2 and log,
and 2% for log10.
Reviewed-by: Wilco Dijkstra <Wilco.Dijkstra@arm.com>
(cherry picked from commit d6e034f5b2)
Add inline helper for log1p and rearrange operations so MOV
is not necessary in reduction or around the special-case handler.
Reduce memory access by using more indexed MLAs in polynomial.
Speedup on Neoverse V1 for log1p (3.5%), acosh (7.5%) and atanh (10%).
(cherry picked from commit ca0c0d0f26)
Remove spurious ADRP and a few MOVs.
Reduce memory access by using more indexed MLAs in polynomial.
Align notation so that algorithms are easier to compare.
Speedup on Neoverse V1 for log10 (8%), log (8.5%), and log2 (10%).
Update error threshold in AdvSIMD log (now matches SVE log).
(cherry picked from commit 8eb5ad2ebc)
Remove spurious ADRP. Improve memory access by shuffling constants and
using more indexed MLAs.
A few more optimisation with no impact on accuracy
- force fmas contraction
- switch from shift-aided rint to rint instruction
Between 1 and 5% throughput improvement on Neoverse
V1 depending on benchmark.
(cherry picked from commit 569cfaaf49)
By using a combination of mask-and-add instead of the shift-based
index calculation the routines can share the same table as other
variants with no performance degradation.
The tables change name because of other changes in downstream AOR.
Reviewed-by: Wilco Dijkstra <Wilco.Dijkstra@arm.com>
(cherry picked from commit 2d82d781a5)
In both routines, reduce register pressure such that GCC 14 emits no
spills for erf and fewer spills for erfc. Also use more efficient
comparison for the special-case in erf.
Benchtests show erf improves by 6.4%, erfc by 1.0%.
(cherry picked from commit 1cf29fbc5b)
This operation can be simplified to use simpler multiply-round-convert
sequence, which uses fewer instructions and constants.
Reviewed-by: Wilco Dijkstra <Wilco.Dijkstra@arm.com>
(cherry picked from commit 16a59571e4)
Rearrange operations so MOV is not necessary in reduction or around
the special-case handler. Reduce memory access by using more indexed
MLAs in polynomial.
Reviewed-by: Wilco Dijkstra <Wilco.Dijkstra@arm.com>
(cherry picked from commit 7900ac490d)
log1pf is quite register-intensive - use fewer registers for the
polynomial, and make various changes to shorten dependency chains in
parent routines. There is now no spilling with GCC 14. Accuracy moves
around a little - comments adjusted accordingly but does not require
regen-ulps.
Use the helper in log1pf as well, instead of having separate
implementations. The more accurate polynomial means special-casing can
be simplified, and the shorter dependency chain avoids the usual dance
around v0, which is otherwise difficult.
There is a small duplication of vectors containing 1.0f (or 0x3f800000) -
GCC is not currently able to efficiently handle values which fit in FMOV
but not MOVI, and are reinterpreted to integer. There may be potential
for more optimisation if this is fixed.
Reviewed-by: Wilco Dijkstra <Wilco.Dijkstra@arm.com>
(cherry picked from commit 5bc100bd4b)
Reduce MOVPRFXs by using unpredicated (non-destructive) instructions
where possible. Similar to the recent change to AdvSIMD F32 logs,
adjust special-case arguments and bounds to allow for more optimal
register usage. For all 3 routines one MOVPRFX remains in the
reduction, which cannot be avoided as immediate AND and ASR are both
destructive.
Reviewed-by: Wilco Dijkstra <Wilco.Dijkstra@arm.com>
(cherry picked from commit a15b1394b5)
Reduce MOV and MOVPRFX by improving special-case handling. Use inline
helper to duplicate the entire computation between the special- and
non-special case branches, removing the contention for z0 between x
and the return value.
Also rearrange some MLAs and MLSs - by making the multiplicand the
destination we can avoid a MOVPRFX in several cases. Also change which
constants go in the vector used for lanewise ops - the last lane is no
longer wasted.
Spotted that shift was incorrect in exp2f and exp10f, w.r.t. to the
comment that explains it. Fixed - worst-case ULP for exp2f moves
around but it doesn't change significantly for either routine.
Worst-case error for coshf increases due to passing x to exp rather
than abs(x) - updated the comment, but does not require regen-ulps.
Reviewed-by: Wilco Dijkstra <Wilco.Dijkstra@arm.com>
(cherry picked from commit 7b8c134b54)
This enables vectorisation of C23 logp1, which is an alias for log1p.
There are no new tests or ulp entries because the new symbols are simply
aliases.
Reviewed-by: Wilco Dijkstra <Wilco.Dijkstra@arm.com>
(cherry picked from commit 751a5502be)
Since the last operation is destructive, the first argument to the FMA
also has to be the first argument to the special-case in order to
avoid unnecessary MOVs. Reorder arguments and adjust special-case
bounds to facilitate this.
Reviewed-by: Wilco Dijkstra <Wilco.Dijkstra@arm.com>
(cherry picked from commit 8b09af572b)
A number of fma tests started to fail on hppa when gcc was changed to
use Ranger rather than EVRP. Eventually I found that the value of
a1 + u.d in this is block of code was being computed in FE_TOWARDZERO
mode and not the original rounding mode:
if (TININESS_AFTER_ROUNDING)
{
w.d = a1 + u.d;
if (w.ieee.exponent == 109)
return w.d * 0x1p-108;
}
This caused the exponent value to be wrong and the wrong return path
to be used.
Here we add an optimization barrier after the rounding mode is reset
to ensure that the previous value of a1 + u.d is not reused.
Signed-off-by: John David Anglin <dave.anglin@bell.net>
Use the __progname symbol to override the program name to induce the
failure that CVE-2025-0395 describes.
This is related to BZ #32582
Signed-off-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
(cherry picked from commit cdb9ba8419)
Set stack size attribute to the size of the mmap'd region only
when the size of the remaining stack space is less than the size
of the mmap'd region.
This was reversed. As a result, the initial stack size was only
135168 bytes. On architectures where the stack grows down, the
initial stack size is approximately 8384512 bytes with the default
rlimit settings. The small main stack size on hppa broke
applications like ruby that check for stack overflows.
Signed-off-by: John David Anglin <dave.anglin@bell.net>
Similar to a9944a52c9 and
f9493a15ea, we need to hide calloc use from
the compiler to accommodate GCC's r15-6566-g804e9d55d9e54c change.
First, include tst-malloc-aux.h, but then use `volatile` variables
for size.
The test passes without the tst-malloc-aux.h change but IMO we want
it there for consistency and to avoid future problems (possibly silent).
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
(cherry picked from commit c3d1dac96b)
Since -1 isn't a power of two, compiler may reject it, hide memalign from
Clang 19 which issues an error:
tst-memalign.c:86:31: error: requested alignment is not a power of 2 [-Werror,-Wnon-power-of-two-alignment]
86 | p = memalign (-1, pagesize);
| ^~
tst-memalign.c:86:31: error: requested alignment must be 4294967296 bytes or smaller; maximum alignment assumed [-Werror,-Wbuiltin-assume-aligned-alignment]
86 | p = memalign (-1, pagesize);
| ^~
Update tst-malloc-aux.h to hide all malloc functions and include it in
all malloc tests to prevent compiler from optimizing out any malloc
functions.
Tested with Clang 19.1.5 and GCC 15 20241206 for BZ #32366.
Signed-off-by: H.J. Lu <hjl.tools@gmail.com>
Reviewed-by: Sam James <sam@gentoo.org>
(cherry picked from commit f9493a15ea)
Include the space needed to store the length of the message itself, in
addition to the message string. This resolves BZ #32582.
Signed-off-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Reviewed: Adhemerval Zanella <adhemerval.zanella@linaro.org>
(cherry picked from commit 68ee0f704c)
Make sure to update the random value also if getrandom fails.
Fixes: 686d542025 ("posix: Sync tempname with gnulib")
(cherry picked from commit 5f62cf88c4)
This simplifies the handling of sanity check errors in clone.S.
Adjusted a couple of comments to reflect current code.
Signed-off-by: John David Anglin <dave.anglin@bell.net>
This change implements vfork.S for direct support of the vfork
syscall. clone.S is revised to correct child support for the
vfork case.
The main bug was creating a frame prior to the clone syscall.
This was done to allow the rp and r4 registers to be saved and
restored from the stack frame. r4 was used to save and restore
the PIC register, r19, across the system call and the call to
set errno. But in the vfork case, it is undefined behavior
for the child to return from the function in which vfork was
called. It is surprising that this usually worked.
Syscalls on hppa save and restore rp and r19, so we don't need
to create a frame prior to the clone syscall. We only need a
frame when __syscall_error is called. We also don't need to
save and restore r19 around the call to $$dyncall as r19 is not
used in the code after $$dyncall.
This considerably simplifies clone.S.
Signed-off-by: John David Anglin <dave.anglin@bell.net>
Some hypervisors report 1 TiB L3 cache size. This results
in some variables incorrectly getting zeroed, causing crashes
in memcpy/memmove because invariants are violated.
(cherry picked from commit 61c3450db9)
Since internal tests don't have access to internal symbols in libm,
exclude them for internal tests. Also make tst-strtod5 and tst-strtod5i
depend on $(libm) to support older versions of GCC which can't inline
copysign family functions. This fixes BZ #32414.
Signed-off-by: H.J. Lu <hjl.tools@gmail.com>
Reviewed-by: Sunil K Pandey <skpgkp2@gmail.com>
(cherry picked from commit 5df09b4448)
The commit 'sparc: Use Linux kABI for syscall return'
(86c5d2cf0c) did not take into account
a subtle sparc syscall kABI constraint. For syscalls that might block
indefinitely, on an interrupt (like SIGCONT) the kernel will set the
instruction pointer to just before the syscall:
arch/sparc/kernel/signal_64.c
476 static void do_signal(struct pt_regs *regs, unsigned long orig_i0)
477 {
[...]
525 if (restart_syscall) {
526 switch (regs->u_regs[UREG_I0]) {
527 case ERESTARTNOHAND:
528 case ERESTARTSYS:
529 case ERESTARTNOINTR:
530 /* replay the system call when we are done */
531 regs->u_regs[UREG_I0] = orig_i0;
532 regs->tpc -= 4;
533 regs->tnpc -= 4;
534 pt_regs_clear_syscall(regs);
535 fallthrough;
536 case ERESTART_RESTARTBLOCK:
537 regs->u_regs[UREG_G1] = __NR_restart_syscall;
538 regs->tpc -= 4;
539 regs->tnpc -= 4;
540 pt_regs_clear_syscall(regs);
541 }
However, on a SIGCONT it seems that 'g1' register is being clobbered after the
syscall returns. Before 86c5d2cf0c, the 'g1' was always placed jus
before the 'ta' instruction which then reloads the syscall number and restarts
the syscall.
On master, where 'g1' might be placed before 'ta':
$ cat test.c
#include <unistd.h>
int main ()
{
pause ();
}
$ gcc test.c -o test
$ strace -f ./t
[...]
ppoll(NULL, 0, NULL, NULL, 0
On another terminal
$ kill -STOP 2262828
$ strace -f ./t
[...]
--- SIGSTOP {si_signo=SIGSTOP, si_code=SI_USER, si_pid=2521813, si_uid=8289} ---
--- stopped by SIGSTOP ---
And then
$ kill -CONT 2262828
Results in:
--- SIGCONT {si_signo=SIGCONT, si_code=SI_USER, si_pid=2521813, si_uid=8289} ---
restart_syscall(<... resuming interrupted ppoll ...>) = -1 EINTR (Interrupted system call)
Where the expected behaviour would be:
$ strace -f ./t
[...]
ppoll(NULL, 0, NULL, NULL, 0) = ? ERESTARTNOHAND (To be restarted if no handler)
--- SIGSTOP {si_signo=SIGSTOP, si_code=SI_USER, si_pid=2521813, si_uid=8289} ---
--- stopped by SIGSTOP ---
--- SIGCONT {si_signo=SIGCONT, si_code=SI_USER, si_pid=2521813, si_uid=8289} ---
ppoll(NULL, 0, NULL, NULL, 0
Just moving the 'g1' setting near the syscall asm is not suffice,
the compiler might optimize it away (as I saw on cancellation.c by
trying this fix). Instead, I have change the inline asm to put the
'g1' setup in ithe asm block. This would require to change the asm
constraint for INTERNAL_SYSCALL_NCS, since the syscall number is not
constant.
Checked on sparc64-linux-gnu.
Reported-by: René Rebe <rene@exactcode.de>
Tested-by: Sam James <sam@gentoo.org>
Reviewed-by: Sam James <sam@gentoo.org>
(cherry picked from commit 2c1903cbba)
(cherry picked from commit 1cd7e13289b91e1495a1865c1f678196d1bb7be4)
So caller can check which state was found if multiple ones are
asked.
Checked on x86_64-linux-gnu.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
(cherry picked from commit 38316352e0)
(cherry picked from commit 2e38c5a090b3a54040b6e508d42e5a76e492c6e8)
GCC 15 introduces allocation dead code removal (DCE) for PR117370 in
r15-5255-g7828dc070510f8. This breaks various glibc tests which want
to assert various properties of the allocator without doing anything
obviously useful with the allocated memory.
Alexander Monakov rightly pointed out that we can and should do better
than passing -fno-malloc-dce to paper over the problem. Not least because
GCC 14 already does such DCE where there's no testing of malloc's return
value against NULL, and LLVM has such optimisations too.
Handle this by providing malloc (and friends) wrappers with a volatile
function pointer to obscure that we're calling malloc (et. al) from the
compiler.
Reviewed-by: Paul Eggert <eggert@cs.ucla.edu>
(cherry picked from commit a9944a52c9)
When adding explicit initialization of rseq fields prior to
registration, I glossed over the fact that 'cpu_id_start' is also
documented as initialized by user-space.
While current kernels don't validate the content of this field on
registration, future ones could.
Signed-off-by: Michael Jeanson <mjeanson@efficios.com>
Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
(cherry picked from commit d9f40387d3)
Per the rseq syscall documentation, 3 fields are required to be
initialized by userspace prior to registration, they are 'cpu_id',
'rseq_cs' and 'flags'. Since we have no guarantee that 'struct pthread'
is cleared on all architectures, explicitly set those 3 fields prior to
registration.
Signed-off-by: Michael Jeanson <mjeanson@efficios.com>
Reviewed-by: Florian Weimer <fweimer@redhat.com>
(cherry picked from commit 97f60abd25)
The remaining_to_add variable can be 0 if (current_used + count) wraps,
This is caught by GCC 14+ on hppa, which determines from there that
target_seg could be be NULL when remaining_to_add is zero, which in
turns causes a -Wstringop-overflow warning:
In file included from ../include/atomic.h:49,
from dl-find_object.c:20:
In function '_dlfo_update_init_seg',
inlined from '_dl_find_object_update_1' at dl-find_object.c:689:30,
inlined from '_dl_find_object_update' at dl-find_object.c:805:13:
../sysdeps/unix/sysv/linux/hppa/atomic-machine.h:44:4: error: '__atomic_store_4' writing 4 bytes into a region of size 0 overflows the destination [-Werror=stringop-overflow=]
44 | __atomic_store_n ((mem), (val), __ATOMIC_RELAXED); \
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
dl-find_object.c:644:3: note: in expansion of macro 'atomic_store_relaxed'
644 | atomic_store_relaxed (&seg->size, new_seg_size);
| ^~~~~~~~~~~~~~~~~~~~
In function '_dl_find_object_update':
cc1: note: destination object is likely at address zero
In practice, this is not possible as it represent counts of link maps.
Link maps have sizes larger than 1 byte, so the sum of any two link map
counts will always fit within a size_t without wrapping around.
This patch therefore adds a check on remaining_to_add == 0 and tell GCC
that this can not happen using __builtin_unreachable.
Thanks to Andreas Schwab for the investigation.
Closes: BZ #32245
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Tested-by: John David Anglin <dave.anglin@bell.net>
Reviewed-by: Florian Weimer <fweimer@redhat.com>
(cherry picked from commit 6c915c73d0)
In commit c628c22963 (elf: Remove
ldconfig kernel version check), the layout of auxcache entries
changed because the osversion field was removed from
struct aux_cache_file_entry. However, AUX_CACHEMAGIC was not
changed, so existing files are still used, potentially leading
to unintended ldconfig behavior. This commit changes AUX_CACHEMAGIC,
so that the file is regenerated.
Reported-by: DJ Delorie <dj@redhat.com>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
(cherry picked from commit 0a536f6e2f)
The test tst-strtod-underflow covers various edge cases close to the
underflow threshold for strtod (especially cases where underflow on
architectures with after-rounding tininess detection depends on the
rounding mode). Make it use the type-generic machinery, with
corresponding test inputs for each supported floating-point format, so
that other functions in the strtod family are tested for underflow
edge cases as well.
Tested for x86_64.
(cherry picked from commit 94ca2c0894)
Since _IO_vtable_offset is used to detect the old binaries, set it
in _IO_old_file_init_internal before calling _IO_link_in which checks
_IO_vtable_offset. Add a glibc 2.0 test with copy relocation on
_IO_stderr_@GLIBC_2.0 to verify that fopen won't cause memory corruption.
This fixes BZ #32148.
Signed-off-by: H.J. Lu <hjl.tools@gmail.com>
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
(cherry picked from commit 9dfea3de7f)
There is very little test coverage of inputs to strtod-family
functions that don't contain anything that can be parsed as a number
(one test of ".y" in tst-strtod2), and none that I can see of skipping
initial whitespace. Add some tests of these things to tst-strtod2.
Tested for x86_64.
(cherry picked from commit 378039ca57)
Although there are some tests in tst-strtod2 and tst-strtod3 for the
end pointer provided by strtod when it doesn't parse the whole string,
they aren't very thorough. Add tests of more such cases to
tst-strtod2.
Tested for x86_64.
(cherry picked from commit b5d3737b30)
Some of the strtod tests use type-generic machinery in tst-strtod.h to
test the strto* functions for all floating types, while others only
test double even when the tests are in fact meaningful for all
floating types.
Convert tst-strtod2 and tst-strtod5 to use the type-generic machinery
so they test all floating types. I haven't tried to convert them to
use newer test interfaces in other ways, just made the changes
necessary to use the type-generic machinery.
Tested for x86_64.
(cherry picked from commit 8de031bcb9)
As reported in bug 32045, it's incorrect for strtod/nan functions to
set errno based on overflowing payload (strtod should only set errno
for overflow / underflow of its actual result, and potentially if
nothing in the string can be parsed as a number at all; nan should be
a pure function that never sets it). Save and restore errno around
the internal strtoull call and add associated test coverage.
Tested for x86_64.
(cherry picked from commit 64f62c47e9)
There are two separate sets of tests of NaN payloads in glibc:
* libm-test-{get,set}payload* verify that getpayload, setpayload,
setpayloadsig and __builtin_nan functions are consistent in their
payload handling.
* test-nan-payload verifies that strtod-family functions and the
not-built-in nan functions are consistent in their payload handling.
Nothing, however, connects the two sets of functions (i.e., verifies
that strtod / nan are consistent with getpayload / setpayload /
__builtin_nan).
Improve test-nan-payload to check actual payload value with getpayload
rather than just verifying that the strtod and nan functions produce
the same NaN. Also check that the NaNs produced aren't signaling and
extend the tests to cover _FloatN / _FloatNx.
Tested for x86_64.
(cherry picked from commit be77d5ae41)
Some of the strtod tests use type-generic machinery in tst-strtod.h to
test the strto* functions for all floating types, while others only
test double even when the tests are in fact meaningful for all
floating types.
Convert the tests of the internal __strtod_internal interface to cover
all floating types. I haven't tried to convert them to use newer test
interfaces in other ways, just made the changes necessary to use the
type-generic machinery. As an internal interface, there are no
aliases for different types with the same ABI (however,
__strtold_internal is defined even if long double has the same ABI as
double), so macros used by the type-generic testing code are redefined
as needed to avoid expecting such aliases to be present.
Tested for x86_64.
(cherry picked from commit 3fc063dee0)
As reported in bug 30220, the implementation of strtod-family
functions has a bug in the following case: the input string would,
with infinite exponent range, take one more bit to represent than is
available in the normal precision of the return type; the value
represented is in the subnormal range; and there are no nonzero bits
in the value, below those that can be represented in subnormal
precision, other than the least significant bit and possibly the
0.5ulp bit. In this case, round_and_return ends up discarding the
least significant bit.
Fix by saving that bit to merge into more_bits (it can't be merged in
at the time it's computed, because more_bits mustn't include this bit
in the case of after-rounding tininess detection checking if the
result is still subnormal when rounded to normal precision, so merging
this bit into more_bits needs to take place after that check).
Tested for x86_64.
(cherry picked from commit 457622c2fa)
Add tests of underflow in tst-strtod-round, and thus also test for
errno being unchanged when there is neither overflow nor underflow.
The errno setting before the function call to test for being unchanged
is adjusted to set errno to 12345 instead of 0, so that any bugs where
strtod sets errno to 0 would be detected.
This doesn't add any new test inputs for tst-strtod-round, and in
particular doesn't cover the edge cases of underflow the way
tst-strtod-underflow does (none of the existing test inputs for
tst-strtod-round actually exercise cases that have underflow with
before-rounding tininess detection but not with after-rounding
tininess detection), but at least it provides some coverage (as per
the recent discussions) that ordinary non-overflowing non-underflowing
inputs to these functions do not set errno.
Tested for x86_64.
(cherry picked from commit d73ed2601b)
We have no tests that errno is set to ERANGE on overflow of
strtod-family functions (we do have some tests for underflow, in
tst-strtod-underflow). Add such tests to tst-strtod-round.
Tested for x86_64.
(cherry picked from commit 207d64feb2)
There seem to be no glibc tests specifically for the fread function.
Add basic tests of that function.
Tested for x86_64.
(cherry picked from commit d14c977c65)
_wide_data and _mode are not available in legacy code, so do not attempt
to free the wide backup buffer in legacy code.
Resolves: BZ #32137 and BZ #27821
Signed-off-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Reviewed-by: Florian Weimer <fweimer@redhat.com>
(cherry picked from commit ae4d44b1d5)
The reading loops did not check for read failures. Addresses
a static analysis report.
Manually tested by compiling a program with the GCC's
-finstrument-functions option, running it with
“LD_PRELOAD=debug/libpcprofile.so PCPROFILE_OUTPUT=output-file”,
and reviewing the output of “debug/pcprofiledump output-file”.
(cherry picked from commit 89b088bf70)
The old code used l_init_called as an indicator for whether TLS
initialization was complete. However, it is possible that
TLS for an object is initialized, written to, and then dlopen
for this object is called again, and l_init_called is not true at
this point. Previously, this resulted in TLS being initialized
twice, discarding any interim writes (technically introducing a
use-after-free bug even).
This commit introduces an explicit per-object flag, l_tls_in_slotinfo.
It indicates whether _dl_add_to_slotinfo has been called for this
object. This flag is used to avoid double-initialization of TLS.
In update_tls_slotinfo, the first_static_tls micro-optimization
is removed because preserving the initalization flag for subsequent
use by the second loop for static TLS is a bit complicated, and
another per-object flag does not seem to be worth it. Furthermore,
the l_init_called flag is dropped from the second loop (for static
TLS initialization) because l_need_tls_init on its own prevents
double-initialization.
The remaining l_init_called usage in resize_scopes and update_scopes
is just an optimization due to the use of scope_has_map, so it is
not changed in this commit.
The isupper check ensures that libc.so.6 is TLS is not reverted.
Such a revert happens if l_need_tls_init is not cleared in
_dl_allocate_tls_init for the main_thread case, now that
l_init_called is not checked anymore in update_tls_slotinfo
in elf/dl-open.c.
Reported-by: Jonathon Anderson <janderson@rice.edu>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
(cherry picked from commit 5097cd344f)
Also remove an outdated comment: _dl_allocate_tls_init is
called as part of pthread_create.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
(cherry picked from commit fe06fb313b)
Remove local FAIL macro in favor to FAIL_EXIT1 from <support/check.h>,
which provides equivalent reporting, with the name of the file and the
line number within of the failure site additionally included. Remove
FAIL_ERR altogether and include ": %m" explicitly with the format string
supplied to FAIL_EXIT1 as there seems little value to have a separate
macro just for this.
Reviewed-by: DJ Delorie <dj@redhat.com>
(cherry picked from commit 8c98195af6)
Remove local FAIL macro in favor to FAIL_RET from <support/check.h>,
which provides equivalent reporting, with the name of the file of the
failure site additionally included, for the tst-truncate-common core
shared between the tst-truncate and tst-truncate64 tests.
Reviewed-by: DJ Delorie <dj@redhat.com>
(cherry picked from commit fe47595504)
If a file descriptor is left unclosed and is cleaned up by _IO_cleanup
on exit, its backup buffer remains unfreed, registering as a leak in
valgrind. This is not strictly an issue since (1) the program should
ideally be closing the stream once it's not in use and (2) the program
is about to exit anyway, so keeping the backup buffer around a wee bit
longer isn't a real problem. Free it anyway to keep valgrind happy
when the streams in question are the standard ones, i.e. stdout, stdin
or stderr.
Also, the _IO_have_backup macro checks for _IO_save_base,
which is a roundabout way to check for a backup buffer instead of
directly looking for _IO_backup_base. The roundabout check breaks when
the main get area has not been used and user pushes a char into the
backup buffer with ungetc. Fix this to use the _IO_backup_base
directly.
Signed-off-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
(cherry picked from commit 3e1d8d1d1d)
When ungetc is called on an unused stream, the backup buffer is
allocated without the main get area being present. This results in
every subsequent ungetc (as the stream remains in the backup area)
checking uninitialized memory in the backup buffer when trying to put a
character back into the stream.
Avoid comparing the input character with buffer contents when in backup
to avoid this uninitialized read. The uninitialized read is harmless in
this context since the location is promptly overwritten with the input
character, thus fulfilling ungetc functionality.
Also adjust wording in the manual to drop the paragraph that says glibc
cannot do multiple ungetc back to back since with this change, ungetc
can actually do this.
Signed-off-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
(cherry picked from commit cdf0f88f97)
Complement commit b03e4d7bd2 ("stdio: fix vfscanf with matches longer
than INT_MAX (bug 27650)") and add a test case for the issue, inspired
by the reproducer provided with the bug report.
This has been verified to succeed as from the commit referred and fail
beforehand.
As the test requires 2GiB of data to be passed around its performance
has been evaluated using a choice of systems and the execution time
determined to be respectively in the range of 9s for POWER9@2.166GHz,
24s for FU740@1.2GHz, and 40s for 74Kf@950MHz. As this is on the verge
of and beyond the default timeout it has been increased by the factor of
8. Regardless, following recent practice the test has been added to the
standard rather than extended set.
Reviewed-by: DJ Delorie <dj@redhat.com>
(cherry picked from commit 89cddc8a70)
Add a FAIL test failure helper analogous to FAIL_RET, that does not
cause the current function to return, providing a standardized way to
report a test failure with a message supplied while permitting the
caller to continue executing, for further reporting, cleaning up, etc.
Update existing test cases that provide a conflicting definition of FAIL
by removing the local FAIL definition and then as follows:
- tst-fortify-syslog: provide a meaningful message in addition to the
file name already added by <support/check.h>; 'support_record_failure'
is already called by 'support_print_failure_impl' invoked by the new
FAIL test failure helper.
- tst-ctype: no update to FAIL calls required, with the name of the file
and the line number within of the failure site additionally included
by the new FAIL test failure helper, and error counting plus count
reporting upon test program termination also already provided by
'support_record_failure' and 'support_report_failure' respectively,
called by 'support_print_failure_impl' and 'adjust_exit_status' also
respectively. However in a number of places 'printf' is called and
the error count adjusted by hand, so update these places to make use
of FAIL instead. And last but not least adjust the final summary just
to report completion, with any error count following as reported by
the test driver.
- test-tgmath2: no update to FAIL calls required, with the name of the
file of the failure site additionally included by the new FAIL test
failure helper. Also there is no need to track the return status by
hand as any call to FAIL will eventually cause the test case to return
an unsuccesful exit status regardless of the return status from the
test function, via a call to 'adjust_exit_status' made by the test
driver.
Reviewed-by: DJ Delorie <dj@redhat.com>
(cherry picked from commit 1b97a9f23b)
Secondary namespaces have a different malloc. Allocating the
buffer in one namespace and freeing it another results in
heap corruption. Fix this by using a static string (potentially
translated) in secondary namespaces. It would also be possible
to use the malloc from the initial namespace to manage the
buffer, but these functions would still not be safe to use in
auditors etc. because a call to strerror could still free a
buffer while it is used by the application. Another approach
could use proper initial-exec TLS, duplicated in secondary
namespaces, but that would need a callback interface for freeing
libc resources in namespaces on thread exit, which does not exist
today.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
(cherry picked from commit 25a5eb4010)
Issue was we were expecting not matches with CHAR before the start of
the string in the page cross case.
The check code in the page cross case:
```
and $0xffffffffffffffc0,%rax
vmovdqa64 (%rax),%zmm17
vpcmpneqb %zmm17,%zmm16,%k1
vptestmb %zmm17,%zmm17,%k0{%k1}
kmovq %k0,%rax
inc %rax
shr %cl,%rax
je L(continue)
```
expects that all characters that neither match null nor CHAR will be
1s in `rax` prior to the `inc`. Then the `inc` will overflow all of
the 1s where no relevant match was found.
This is incorrect in the page-cross case, as the
`vmovdqa64 (%rax),%zmm17` loads from before the start of the input
string.
If there are matches with CHAR before the start of the string, `rax`
won't properly overflow.
The fix is quite simple. Just replace:
```
inc %rax
shr %cl,%rax
```
With:
```
sar %cl,%rax
inc %rax
```
The arithmetic shift will clear any matches prior to the start of the
string while maintaining the signbit so the 1s can properly overflow
to zero in the case of no matches.
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
(cherry picked from commit 7da0886247)
Use RXX_LP in RTLD_START_ENABLE_X86_FEATURES. Support shadow stack during
startup for Linux 6.10:
commit 2883f01ec37dd8668e7222dfdb5980c86fdfe277
Author: H.J. Lu <hjl.tools@gmail.com>
Date: Fri Mar 15 07:04:33 2024 -0700
x86/shstk: Enable shadow stacks for x32
1. Add shadow stack support to x32 signal.
2. Use the 64-bit map_shadow_stack syscall for x32.
3. Set up shadow stack for x32.
Add the map_shadow_stack system call to <fixup-asm-unistd.h> and regenerate
arch-syscall.h. Tested on Intel Tiger Lake with CET enabled x32. There
are no regressions with CET enabled x86-64. There are no changes in CET
enabled x86-64 _dl_start_user.
Signed-off-by: H.J. Lu <hjl.tools@gmail.com>
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
(cherry picked from commit 8344c1f551)
Remove sysdeps/x86_64/x32/dl-machine.h by folding x32 ARCH_LA_PLTENTER,
ARCH_LA_PLTEXIT and RTLD_START into sysdeps/x86_64/dl-machine.h. There
are no regressions on x86-64 nor x32. There are no changes in x86-64
_dl_start_user. On x32, _dl_start_user changes are
<_dl_start_user>:
mov %eax,%r12d
+ mov %esp,%r13d
mov (%rsp),%edx
mov %edx,%esi
- mov %esp,%r13d
and $0xfffffff0,%esp
mov 0x0(%rip),%edi # <_dl_start_user+0x14>
lea 0x8(%r13,%rdx,4),%ecx
Signed-off-by: H.J. Lu <hjl.tools@gmail.com>
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
(cherry picked from commit 652c6cf269)
This avoids crashes if a test is passed unknown options.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
(cherry picked from commit c2a474f461)
This is a follow-up to 10de4a47ef that
reworded the manual entries for putc and putwc and removed any
performance claims.
This commit further clarifies these entries and brings getc and getwc in
line with the descriptions of putc and putwc, removing any performance
claims from them as well.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
(cherry picked from commit 942670c81d)
Rename the identifier sz to __sz everywhere.
Fixes: a643f60c53 ("Make sure that the fortified function conditionals are constant")
(cherry picked from commit 39ca997ab3)
Previous GCC versions do not support the C23 change that
allows labels on declarations.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
(cherry picked from commit ec119972cb)
Add tests for MREMAP_MAYMOVE and MREMAP_FIXED. On Linux, also test
MREMAP_DONTUNMAP.
Signed-off-by: H.J. Lu <hjl.tools@gmail.com>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
(cherry picked from commit ff0320bec2)
Update the mremap C implementation to support the optional argument for
MREMAP_DONTUNMAP added in Linux 5.7 since it may not always be correct
to implement a variadic function as a non-variadic function on all Linux
targets. Return MAP_FAILED and set errno to EINVAL for unknown flag bits.
This fixes BZ #31968.
Note: A test must be added when a new flag bit is introduced.
Signed-off-by: H.J. Lu <hjl.tools@gmail.com>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
(cherry picked from commit 6c40cb0e9f)
Add string/test-strncmp-nonarray and
wcsmbs/test-wcsncmp-nonarray.
This is the test that uncovered bug 31934. Test run time
is more than one minute on a fairly current system, so turn
these into xtests that do not run automatically.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
(cherry picked from commit 54252394c2)
This commit adds string/test-strnlen-nonarray and
wcsmbs/test-wcsnlen-nonarray.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
(cherry picked from commit 783d4c0b81)
The existing description for setrlimit() has some ambiguity. It could be
understood to have the semantics of getrlimit(), i.e., the limits from the
process are stored in the provided rlp pointer.
Make the description more explicit that rlp are the input values, and that
the limits of the process is changed with this function.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
(cherry picked from commit aedbf08891)
The manual entry for `putc' described what "most systems" do instead of
describing the glibc implementation and its guarantees. This commit
fixes that by warning that putc may be implemented as a macro that
double-evaluates `stream', and removing the performance claim.
Even though the current `putc' implementation does not double-evaluate
`stream', offering this obscure guarantee as an extension to what
POSIX allows does not seem very useful.
The entry for `putwc' is also edited to bring it in line with `putc'.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
(cherry picked from commit 10de4a47ef)
Improve aligned_alloc/calloc/malloc test coverage by adding
multi-threaded tests with random memory allocations and with/without
cross-thread memory deallocations.
Perform a number of memory allocation calls with random sizes limited
to 0xffff.
Use the existing DSO ('malloc/tst-aligned_alloc-lib.c') to randomize
allocator selection.
The multi-threaded allocation/deallocation is staged as described below:
- Stage 1: Half of the threads will be allocating memory and the
other half will be waiting for them to finish the allocation.
- Stage 2: Half of the threads will be allocating memory and the
other half will be deallocating memory.
- Stage 3: Half of the threads will be deallocating memory and the
second half waiting on them to finish.
Add 'malloc/tst-aligned-alloc-random-thread.c' where each thread will
deallocate only the memory that was previously allocated by itself.
Add 'malloc/tst-aligned-alloc-random-thread-cross.c' where each thread
will deallocate memory that was previously allocated by another thread.
The intention is to be able to utilize existing malloc testing to ensure
that similar allocation APIs are also exposed to the same rigors.
Reviewed-by: Arjun Shankar <arjun@redhat.com>
(cherry picked from commit b0fbcb7d00)
Make sure the DSO used by aligned_alloc/calloc/malloc tests does not get
a global lock on multithreaded tests.
Reviewed-by: Arjun Shankar <arjun@redhat.com>
(cherry picked from commit 9a27b566b2)
The current toolchain does not consistently generate it, and
glibc does not use it.
Reviewed-by: Szabolcs Nagy <szabolcs.nagy@arm.com>
(cherry picked from commit 90842d3980)
In single-request mode, there is no second response after an error
because the second query has not been sent yet. Waiting for it
introduces an unnecessary timeout.
Reviewed-by: DJ Delorie <dj@redhat.com>
(cherry picked from commit af625987d6)
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
Miao Wang
Fabian Rast
Florian Weimer
DJ Delorie
Xi Ruoyao
Carlos O'Donell
Yury Khrustalev
Adhemerval Zanella
Siddhesh Poyarekar
Sunil K Pandey
Collin Funk
H.J. Lu
Sachin Monga
Pierre Blanchard
Joe Ramsay
Jiamei Xie
Joseph Myers
mengqinggang
Jens Remus
Luna Lamb
Dylan Fleming
Wilco Dijkstra
Arjun Shankar
Malte Skarupke
Frank Barrus
Sunil K Pandey
Noah Goldstein
Michael Jeanson
Yat Long Poon
Joana Cruz
John David Anglin
Siddhesh Poyarekar
Sam James
Andreas Schwab
Aurelien Jarno
Michael Karcher
Sergey Kolosov
Maciej W. Rozycki
Lukas Bulwahn
Miguel Martín
Andreas K. Hüttel