Update.

1997-04-30 17:35  Ulrich Drepper  <drepper@cygnus.com>

	* math/libm-test.c: Implement test for exceptions.
	Partly due to Andreas Jaeger.
	(csin_test): New function.
	* sysdeps/libm-i387/s_cexp.S: Raise correct exceptions.
	* sysdeps/libm-i387/s_cexpf.S: Likewise.
	* sysdeps/libm-i387/s_cexpl.S: Likewise.
	* sysdeps/libm-ieee754/s_ccos.c: Likewise.
	* sysdeps/libm-ieee754/s_ccosf.c: Likewise.
	* sysdeps/libm-ieee754/s_ccosl.c: Likewise.
	* sysdeps/libm-ieee754/s_ccosh.c: Likewise.
	* sysdeps/libm-ieee754/s_ccoshf.c: Likewise.
	* sysdeps/libm-ieee754/s_ccoshl.c: Likewise.
	* sysdeps/libm-ieee754/s_cexp.c: Likewise.
	* sysdeps/libm-ieee754/s_cexpf.c: Likewise.
	* sysdeps/libm-ieee754/s_cexpl.c: Likewise.
	* sysdeps/libm-ieee754/s_csinh.c: Likewise.
	* sysdeps/libm-ieee754/s_csinhf.c: Likewise.
	* sysdeps/libm-ieee754/s_csinhl.c: Likewise.
	* sysdeps/libm-ieee754/s_ctanh.c: Likewise.
	* sysdeps/libm-ieee754/s_ctanhf.c: Likewise.
	* sysdeps/libm-ieee754/s_ctanhl.c: Likewise.

	* sysdeps/libm-ieee754/s_ccosh.c: Correct computation.
	* sysdeps/libm-ieee754/s_ccoshf.c: Likewise.
	* sysdeps/libm-ieee754/s_ccoshl.c: Likewise.
	* sysdeps/libm-ieee754/s_csinh.c: Likewise.
	* sysdeps/libm-ieee754/s_csinhf.c: Likewise.
	* sysdeps/libm-ieee754/s_csinhl.c: Likewise.

	* sysdeps/libm-ieee754/s_csin.c: Rewrite.
	* sysdeps/libm-ieee754/s_csinf.c: Likewise.
	* sysdeps/libm-ieee754/s_csinl.c: Likewise.

	* stdlib/random_r.c (__srandom_r): Don't use seed 0.  Use 1 in this
	case.

	* sysdeps/i386/dl-machine.h (elf_machine_load_address): Use notation
	for local label.

	* time/strftime.c (add): Respect `0' padding flag.
	Reported by Richard Stallman <rms@gnu.ai.mit.edu>.

1997-04-30 15:46  Ulrich Drepper  <drepper@cygnus.com>

	* Makeconfig (start-installed-name): Define here, not in csu/Makefile.
	Use in +link macro.
	* csu/Makefile (distribute): Add abi-note.S and abi-tag.h.
	(start-installed-name): Don't define here.
	When ELF generate file named by start-installed-name from start.o
	and abi-note.o.
	* csu/abi-note.S: New file.
	* sysdeps/stub/abi-tag.h: New file.
	* sysdpes/unix/sysv/linux/abi-tag.h: New file.
	Patches by Roland McGrath <roland@gnu.ai.mit.edu>.

1997-04-30 01:32  Ulrich Drepper  <drepper@cygnus.com>

	* manual/stdio.texi: Use @vtable where possible.
	Add TeX version of @multitable since texi2dvi cannot handle them
	correct in the moment.

	* po/de.po: Update.

1997-04-29 21:06  Ulrich Drepper  <drepper@cygnus.com>

	* Makeconfig: Don't set cross-compiling based on $(BUILD_CC) != $(CC).
	* config.make.in: Set cross-compiling from configure result.
	* configure.in: Emit definition of `cross_compiling'.
	Patches by Marcus G. Daniels <marcus@cathcart.sysc.pdx.edu>.

1997-04-27 21:50  Philip Blundell  <pjb27@cam.ac.uk>

	* sysdeps/unix/sysv/linux/net/route.h (struct in6_rtmsg): Use
	correct `int' sizes for struct members.

1997-04-29 19:14  Ulrich Drepper  <drepper@cygnus.com>

	* sysdeps/libm-i387/e_powf.S Generate invalid exception correctly.
	* sysdeps/libm-i387/e_pow.S: Likewise.
	* sysdeps/libm-i387/e_powl.S: Likewise.

1997-04-23 10:08  Andreas Jaeger  <aj@arthur.rhein-neckar.de>

	* math/fenv.h: Correct typos.

1997-04-28 10:04  Richard Henderson  <rth@tamu.edu>

	* sysdeps/unix/sysv/linux/alpha/clone.S: Save the function argument
	in t0 rather than a4 to avoid it being clobbered.

1997-04-27 23:52  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>

	* manual/summary.awk: Recognize @defmumblex.

	* manual/signal.texi (Miscellaneous Signals): Use @deftypevrx for
	second description header.

1997-04-27 23:29  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>

	* manual/arith.texi (Floating-Point Classes): Don't indent text,
	makeinfo doesn't like that.

1997-04-27 20:52  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>

	* malloc/obstack.h (obstack_specify_allocation_with_arg,
	obstack_chunkfun, obstack_freefun): Fix casts.

1997-04-27 18:21  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>

	* manual/xtract-typefun.awk: Allow names with only one character.

1997-04-26 14:16  Ulrich Drepper  <drepper@cygnus.com>

	* sysdeps/unix/sysv/linux/netinet/ip_fw.h: Use <netinet/ip_icmp.h>
	not <netinet/icmp.h>.
	Reported by Michael Deutschmann <ldeutsch@mail.netshop.net>.

1997-04-25 12:31  Ulrich Drepper  <drepper@cygnus.com>

	* csu/Makefile ($(objpfx)initfini.s): Add CPPFLAGS, CFLAGS and -g0
	to command line of compiler.
	Patch by Marcus G. Daniels <marcus@sysc.pdx.edu>.

	* sysdeps/generic/sigset.h (__sigandset, __sigorset): Fix typos.
	Patch by Marcus G. Daniels <marcus@sysc.pdx.edu>.

	* signal/signal.h (_sys_siglist, sys_siglist): Use _NSIG, not NSIG
	in declaration.
	Patch by Michael Widenius <monty@tcx.se>.

	* time/strptime.c (strptime_internal): Fix %I format specifier
	being off by one.
	Patch by Mark Kettenis <kettenis@phys.uva.nl>.

1997-04-24 12:18  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>

	* stdlib/lcong48_r.c: Include <limits.h>.
	* stdlib/seed48_r.c: Likewise.

	* stdio-common/printf_size.c (printf_size): Correct type of
	`units' and make robust against future changes.

1997-04-23 18:58  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>

	* sysdeps/libm-ieee754/s_cproj.c: Use isfinite instead of finite.
	* sysdeps/libm-ieee754/s_cprojl.c: Likewise.
	* sysdeps/libm-ieee754/s_cprojf.c: Likewise.

1997-04-23 18:53  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>

	* manual/arith.texi, manual/math.texi: Use @defmumblex for
	additional description headers.
	* manual/xtract-typefun.awk: Recognize them.

1997-04-22 15:58  Andreas Jaeger  <aj@arthur.rhein-neckar.de>

	* stdio-common/printf_size.c (printf_size): Correct size of array
	units.

.cvsignore

@@ -1,9 +1,10 @@
+*.d *.o *.so *.po *.go *.bo stamp.* *.stamp *.ustamp *.udeps
 *.gz *.Z *.tar *.tgz
 =*
 TODO COPYING* AUTHORS copyr-* copying.*
 glibc-*
 
-configparms 
+configparms
 
 sun[43]* i[345]86* hp300*
 
@@ -12,3 +13,11 @@ ieeetest hppa-sysdeps regex
 gpl2lgpl.sed
 distinfo
 distinfo
+
+analysis
+docs
+
+crypt
+linuxthreads
+localedata
+secure_rpc

BUGS

@@ -0,0 +1,62 @@
+	    List of known bugs (certainly very incomplete)
+	    ----------------------------------------------
+
+Time-stamp: <1997-03-22T04:31:41+0100 drepper>
+
+This following list contains those bugs which I'm aware of.  Please
+make sure that bugs you report are not listed here.  If you can fix one
+of these bugs/limitations I'll certainly be glad to receive a patch.
+
+Another source of information about bugs is the problem data base of the
+GNU project.  There is an easy to use WWW interface is available at
+
+	http://pogo.gnu.ai.mit.edu:8080/cgi-bin/wwwgnats.pl
+
+I would appreciate it very much if you could verify the problem was not
+reported before by looking though the database.  To make the information
+in this data as useful as possible please report bugs always using the
+`glibcbug' shell script which gets installed with GNU libc.
+
+
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Severity: [  *] to [***]
+
+
+[ **]  For GNU libc on Linux, there is still no solution for the UTMP
+       problem.
+       [Among others: PR libc/39]
+
+[ **]  There are problems with signal handling when using LinuxThreads.
+
+[ **]  The `cbrtl' function is inaccurate.  The algorithm used for `double'
+       and `float' is not usable for `long double'.
+
+[ **]  Not really a bug, but it could lead to such:
+       The RPC code is ugly ugly ugly.  It's more or less verbatim taken
+       from Sun's code and therefore mostly lacks complete prototypes and
+       (more important) the use of `const'.  It *definitely* needs to be
+       cleaned.
+
+[  *]  The precision of the `sinhl' and/or `asinhl' function do not seem
+       to be the best.
+
+[  *]  The syslog function should print to the console if the LOG_CONS
+       flag was given.
+       [PR libc/72]
+
+[  *]  On Linux, the <linux/posix_types.h> is not clean enough to satisfy
+       the C++ namespace rules.  Declaring `struct fd_set' also makes
+       `fd_set' available in the global namespace which conflicts with
+       the definition of `fd_set' in glibc.
+       [PR libc/79]
+
+[  *]  On Linux, there should be a way to prevent defining the symbol
+       NGROUPS_MAX in the <linux/limits.h> header file.  In glibc it
+       is defined in <posix1_lim.h> which must not make the other
+       symbols in <linux/limits.h> available.
+       [PR libc/140]
+
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+Ulrich Drepper
+drepper@cygnus.com

FAQ

@@ -0,0 +1,707 @@
+		Frequently Asked Question on GNU C Library
+
+As every FAQ this one also tries to answer questions the user might have
+when using the package.  Please make sure you read this before sending
+questions or bug reports to the maintainers.
+
+The GNU C Library is very complex.  The building process exploits the
+features available in tools generally available.  But many things can
+only be done using GNU tools.  Also the code is sometimes hard to
+understand because it has to be portable but on the other hand must be
+fast.  But you need not understand the details to use GNU C Library.
+This will only be necessary if you intend to contribute or change it.
+
+If you have any questions you think should be answered in this document,
+please let me know.
+
+						  --drepper@cygnus.com
+
+~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~
+[Q1]	``What systems does the GNU C Library run on?''
+
+[Q2]	``What compiler do I need to build GNU libc?''
+
+[Q3]	``When starting make I get only error messages.
+	  What's wrong?''
+
+[Q4]	``After I changed configure.in I get `Autoconf version X.Y.
+	  or higher is required for this script'.  What can I do?''
+
+[Q5]	``Do I need a special linker or archiver?''
+
+[Q6]	``Do I need some more things to compile GNU C Library?''
+
+[Q7]	``When I run `nm -u libc.so' on the produced library I still
+	  find unresolved symbols?  Can this be ok?''
+
+[Q8]	``Can I replace the libc on my Linux system with GNU libc?''
+
+[Q9]	``I expect GNU libc to be 100% source code compatible with
+	  the old Linux based GNU libc.  Why isn't it like this?''
+
+[Q10]	``Why does getlogin() always return NULL on my Linux box?''
+
+[Q11]	``Where are the DST_* constants found in <sys/time.h> on many
+	  systems?''
+
+[Q12]	``The `gencat' utility cannot process the input which are
+	  successfully used on my Linux libc based system.  Why?''
+
+[Q13]	``How do I configure GNU libc so that the essential libraries
+	  like libc.so go into /lib and the other into /usr/lib?''
+
+[Q14]	``When linking with the new libc I get unresolved symbols
+	  `crypt' and `setkey'.  Why aren't these functions in the
+	  libc anymore?''
+
+[Q15]	``What are these `add-ons'?''
+
+[Q16]	``When I use GNU libc on my Linux system by linking against
+	  to libc.so which comes with glibc all I get is a core dump.''
+
+[Q17]	``Looking through the shared libc file I haven't found the
+	  functions `stat', `lstat', `fstat', and `mknod' and while
+	  linking on my Linux system I get error messages.  How is
+	  this supposed to work?''
+
+[Q18]	``The prototypes for `connect', `accept', `getsockopt',
+	  `setsockopt', `getsockname', `getpeername', `send',
+	  `sendto', and `recvfrom' are different in GNU libc than
+	  on any other system I saw.  This is a bug, isn't it?''
+
+[Q19]	``My XXX kernel emulates a floating-point coprocessor for me.
+	  Should I enable --with-fp?''
+
+[Q20]	``How can I compile gcc 2.7.2.1 from the gcc source code using
+	  glibc 2.x?
+
+[Q21]    ``On Linux I've got problems with the declarations in Linux
+           kernel headers.''
+
+[Q22]	``When I try to compile code which uses IPv6 header and
+	  definitions on my Linux 2.x.y system I am in trouble.
+	  Nothing seems to work.''
+
+[Q23]	``When compiling GNU libc I get lots of errors saying functions
+	  in glibc are duplicated in libgcc.''
+
+[Q24]	``I have set up /etc/nis.conf, and the Linux libc 5 with NYS
+	  works great.  But the glibc NIS+ doesn't seem to work.''
+
+~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~
+[Q1]	``What systems does the GNU C Library run on?''
+
+[A1] {UD} This is difficult to answer.  The file `README' lists the
+architectures GNU libc is known to run *at some time*.  This does not
+mean that it still can be compiled and run on them in the moment.
+
+The systems glibc is known to work on in the moment and most probably
+in the future are:
+
+	*-*-gnu			GNU Hurd
+	i[3456]86-*-linux-gnu	Linux-2.0 on Intel
+	m68k-*-linux-gnu	Linux-2.0 on Motorola 680x0
+	alpha-*-linux-gnu	Linux-2.0 on DEC Alpha
+
+Other Linux platforms are also on the way to be supported but I need
+some success reports first.
+
+If you have a system not listed above (or in the `README' file) and
+you are really interested in porting it, contact
+
+	<bug-glibc@prep.ai.mit.edu>
+
+
+~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~
+[Q2]	``What compiler do I need to build GNU libc?''
+
+[A2] {UD} It is (almost) impossible to compile GNU C Library using a
+different compiler than GNU CC.  A lot of extensions of GNU CC are
+used to increase the portability and speed.
+
+But this does not mean you have to use GNU CC for using the GNU C
+Library.  In fact you should be able to use the native C compiler
+because the success only depends on the binutils: the linker and
+archiver.
+
+The GNU CC is found like all other GNU packages on
+	ftp://prep.ai.mit.edu/pub/gnu
+or better one of the many mirror sites.
+
+You always should try to use the latest official release.  Older
+versions might not have all the features GNU libc could use.
+
+
+~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~
+[Q3]	``When starting `make' I get only errors messages.
+	  What's wrong?''
+
+[A3] {UD} You definitely need GNU make to translate GNU libc.  No
+other make program has the needed functionality.
+
+Versions before 3.74 have bugs which prevent correct execution so you
+should upgrade to the latest version before starting the compilation.
+
+
+~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~
+[Q4]	``After I changed configure.in I get `Autoconf version X.Y.
+	  or higher is required for this script'.  What can I do?''
+
+[A4] {UD} You have to get the specified autoconf version (or a later)
+from your favourite mirror of prep.ai.mit.edu.
+
+
+~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~
+[Q5]	``Do I need a special linker or archiver?''
+
+[A5] {UD} If your native versions are not too buggy you can probably
+work with them.  But GNU libc works best with GNU binutils.
+
+On systems where the native linker does not support weak symbols you
+will not get a really ISO C compliant C library.  Generally speaking
+you should use the GNU binutils if they provide at least the same
+functionality as your system's tools.
+
+Always get the newest release of GNU binutils available.
+Older releases are known to have bugs that affect building the GNU C
+Library.
+
+
+~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~
+[Q6]	``Do I need some more things to compile GNU C Library?''
+
+[A6] {UD} Yes, there are some more :-).
+
+* GNU gettext; the GNU libc is internationalized and partly localized.
+  For bringing the messages for the different languages in the needed
+  form the tools from the GNU gettext package are necessary.  See
+  ftp://prep.ai.mit.edu/pub/gnu or better any mirror site.
+
+* lots of diskspace (for i?86-linux this means, e.g., ~70MB).
+
+  You should avoid compiling on a NFS mounted device.  This is very
+  slow.
+
+* plenty of time (approx 1h for i?86-linux on i586@133 or 2.5h on
+  i486@66 or 4.5h on i486@33).  For Hurd systems times are much higher.
+
+  If you have some more measurements let me know.
+
+* When compiling for Linux:
+
+  + the header files of the Linux kernel must be available in the
+    search path of the CPP as <linux/*.h> and <asm/*.h>.
+
+* Some files depend on special tools.  E.g., files ending in .gperf
+  need a `gperf' program.  The GNU version (part of libg++) is known
+  to work while some vendor versions do not.
+
+  You should not need these tools unless you change the source files.
+
+~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~
+[Q7]	``When I run `nm -u libc.so' on the produced library I still
+	  find unresolved symbols?  Can this be ok?''
+
+[A7] {UD} Yes, this is ok.  There can be several kinds of unresolved
+symbols:
+
+* magic symbols automatically generated by the linker.  Names are
+  often like __start_* and __stop_*
+
+* symbols starting with _dl_* come from the dynamic linker
+
+* symbols resolved by using libgcc.a
+  (__udivdi3, __umoddi3, or similar)
+
+* weak symbols, which need not be resolved at all
+  (currently fabs among others; this gets resolved if the program
+   is linked against libm, too.)
+
+Generally, you should make sure you find a real program which produces
+errors while linking before deciding there is a problem.
+
+
+~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~
+[Q8]	``Can I replace the libc on my Linux system with GNU libc?''
+
+[A8] {UD} You cannot replace any existing libc for Linux with GNU
+libc.  There are different versions of C libraries and you can run
+libcs with different major version independently.
+
+For Linux there are today two libc versions:
+	libc-4		old a.out libc
+	libc-5		current ELF libc
+
+GNU libc will have the major number 6 and therefore you can have this
+additionally installed.  For more information consult documentation for
+shared library handling.  The Makefiles of GNU libc will automatically
+generate the needed symbolic links which the linker will use.
+
+
+~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~
+[Q9]	``I expect GNU libc to be 100% source code compatible with
+	  the old Linux based GNU libc.  Why isn't it like this?''
+
+[A9] {DMT,UD} Not every extension in Linux libc's history was well
+thought-out.  In fact it had a lot of problems with standards compliance
+and with cleanliness.  With the introduction of a new version number these
+errors now can be corrected.  Here is a list of the known source code
+incompatibilities:
+
+* _GNU_SOURCE: glibc does not automatically define _GNU_SOURCE.  Thus,
+  if a program depends on GNU extensions or some other non-standard
+  functionality, it is necessary to compile it with C compiler option
+  -D_GNU_SOURCE, or better, to put `#define _GNU_SOURCE' at the beginning
+  of your source files, before any C library header files are included.
+  This difference normally manifests itself in the form of missing
+  prototypes and/or data type definitions.  Thus, if you get such errors,
+  the first thing you should do is try defining _GNU_SOURCE and see if
+  that makes the problem go away.
+
+  For more information consult the file `NOTES' part of the GNU C
+  library sources.
+
+* reboot(): GNU libc sanitizes the interface of reboot() to be more
+  compatible with the interface used on other OSes.  In particular,
+  reboot() as implemented in glibc takes just one argument.  This argument
+  corresponds to the third argument of the Linux reboot system call.
+  That is, a call of the form reboot(a, b, c) needs to be changed into
+  reboot(c).
+     Beside this the header <sys/reboot.h> defines the needed constants
+  for the argument.  These RB_* constants should be used instead of the
+  cryptic magic numbers.
+
+* swapon(): the interface of this function didn't changed, but the
+  prototype is in a separate header file <sys/swap.h>.  For the additional
+  argument of swapon() you should use the SWAP_* constants from
+  <linux/swap.h>, which get defined when <sys/swap.h> is included.
+
+* errno: If a program uses variable "errno", then it _must_ include header
+  file <errno.h>.  The old libc often (erroneously) declared this variable
+  implicitly as a side-effect of including other libc header files.  glibc
+  is careful to avoid such namespace pollution, which, in turn, means that
+  you really need to include the header files that you depend on.  This
+  difference normally manifests itself in the form of the compiler
+  complaining about the references of the undeclared symbol "errno".
+
+* Linux-specific syscalls: All Linux system calls now have appropriate
+  library wrappers and corresponding declarations in various header files.
+  This is because the syscall() macro that was traditionally used to
+  work around missing syscall wrappers are inherently non-portable and
+  error-prone.  The following tables lists all the new syscall stubs,
+  the header-file declaring their interface and the system call name.
+
+       syscall name:	wrapper name:	declaring header file:
+       -------------	-------------	----------------------
+       bdflush		bdflush		<sys/kdaemon.h>
+       create_module	create_module	<sys/module.h>
+       delete_module	delete_module	<sys/module.h>
+       get_kernel_syms	get_kernel_syms	<sys/module.h>
+       init_module	init_module	<sys/module.h>
+       syslog		ksyslog_ctl	<sys/klog.h>
+
+* lpd: Older versions of lpd depend on a routine called _validuser().
+  The library does not provide this function, but instead provides
+  __ivaliduser() which has a slightly different interfaces.  Simply
+  upgrading to a newer lpd should fix this problem (e.g., the 4.4BSD
+  lpd is known to be working).
+
+* resolver functions/BIND: like on many other systems the functions of
+  the resolver library are not included in the libc itself.  There is
+  a separate library libresolv.  If you find some symbols starting with
+  `res_*' undefined simply add -lresolv to your call of the linker.
+
+* the `signal' function's behaviour corresponds to the BSD semantic and
+  not the SysV semantic as it was in libc-5.  The interface on all GNU
+  systems shall be the same and BSD is the semantic of choice.  To use
+  the SysV behaviour simply use `sysv_signal'.  The major difference is
+  that the SysV implementation sets the SA_ONESHOT flag and so the handler
+  gets removed after the first call.
+
+
+~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~
+[Q10]	``Why does getlogin() always return NULL on my Linux box?''
+
+[A10] {UD} The GNU C library has a format for the UTMP and WTMP file
+which differs from what your system currently has.  It was extended to
+fulfill the needs of the next years when IPv6 is introduced.  So the
+record size is different, fields might have a different position and
+so reading the files written by functions from the one library cannot
+be read by functions from the other library.  Sorry, but this is what
+a major release is for.  It's better to have a cut now than having no
+means to support the new techniques later.
+
+
+~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~
+[Q11]	``Where are the DST_* constants found in <sys/time.h> on many
+	  systems?''
+
+[A11] {UD} These constants come from the old BSD days and are not used
+today anymore (even the Linux based glibc does not implement the handling
+although the constants are defined).
+
+Instead GNU libc contains the zone database handling and compatibility
+code for POSIX TZ environment variable handling.
+
+
+~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~
+[Q12]	``The `gencat' utility cannot process the input which are
+	  successfully used on my Linux libc based system.  Why?''
+
+[A12] {UD} Unlike the author of the `gencat' program which is distributed
+with Linux libc I have read the underlying standards before writing the
+code.  It is completely compatible with the specification given in
+X/Open Portability Guide.
+
+To ease the transition from the Linux version some of the non-standard
+features are also present in the `gencat' program of GNU libc.  This
+mainly includes the use of symbols for the message number and the automatic
+generation of header files which contain the needed #defines to map the
+symbols to integers.
+
+Here is a simple SED script to convert at least some Linux specific
+catalog files to the XPG4 form:
+
+-----------------------------------------------------------------------
+# Change catalog source in Linux specific format to standard XPG format.
+# Ulrich Drepper <drepper@cygnus.com>, 1996.
+#
+/^\$ #/ {
+  h
+  s/\$ #\([^ ]*\).*/\1/
+  x
+  s/\$ #[^ ]* *\(.*\)/\$ \1/
+}
+
+/^# / {
+  s/^# \(.*\)/\1/
+  G
+  s/\(.*\)\n\(.*\)/\2 \1/
+}
+-----------------------------------------------------------------------
+
+
+~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~
+[Q13]	``How do I configure GNU libc so that the essential libraries
+	  like libc.so go into /lib and the other into /usr/lib?''
+
+[A13] {UD,AJ} Like all other GNU packages GNU libc is configured to
+use a base directory and install all files relative to this.  If you
+intend to really use GNU libc on your system this base directory is
+/usr.  I.e., you run
+	configure --prefix=/usr <other_options>
+
+Some systems like Linux have a filesystem standard which makes a
+difference between essential libraries and others.  Essential
+libraries are placed in /lib because this directory is required to be
+located on the same disk partition as /.  The /usr subtree might be
+found on another partition/disk.
+
+To install the essential libraries which come with GNU libc in /lib
+one must explicitly tell this (except on Linux, see below).  Autoconf
+has no option for this so you have to use the file where all user
+supplied additional information should go in: `configparms' (see the
+`INSTALL' file).  Therefore the `configparms' file should contain:
+
+slibdir=/lib
+sysconfdir=/etc
+
+The first line specifies the directory for the essential libraries,
+the second line the directory for file which are by tradition placed
+in a directory named /etc.
+
+No rule without an exception: If you configure for Linux with
+--prefix=/usr, then slibdir and sysconfdir will automatically be
+defined as stated above.
+
+
+~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~
+[Q14]	``When linking with the new libc I get unresolved symbols
+	  `crypt' and `setkey'.  Why aren't these functions in the
+	  libc anymore?''
+
+[A14] {UD} Remember the US restrictions of exporting cryptographic
+programs and source code.  Until this law gets abolished we cannot
+ship the cryptographic function together with the libc.
+
+But of course we provide the code and there is an very easy way to use
+this code.  First get the extra package.  People in the US way get it
+from the same place they got the GNU libc from.  People outside the US
+should get the code from ftp.uni-c.dk [129.142.6.74], or another
+archive site outside the USA.  The README explains how to install the
+sources.
+
+If you already have the crypt code on your system the reason for the
+failure is probably that you failed to link with -lcrypt.  The crypto
+functions are in a separate library to make it possible to export GNU
+libc binaries from the US.
+
+
+~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~
+[Q15]	``What are these `add-ons'?''
+
+[A15] {UD} To avoid complications with export rules or external source
+code some optional parts of the libc are distributed as separate
+packages (e.g., the crypt package, see Q14).
+
+To ease the use as part of GNU libc the installer just has to unpack
+the package and tell the configuration script about these additional
+subdirectories using the --enable-add-ons option.  When you add the
+crypt add-on you just have to use
+
+	configure --enable-add-ons=crypt,XXX ...
+
+where XXX are possible other add-ons and ... means the rest of the
+normal option list.
+
+You can use add-ons also to overwrite some files in glibc.  The add-on
+system dependent subdirs are search first.  It is also possible to add
+banner files (use a file named `Banner') or create shared libraries.
+
+Using add-ons has the big advantage that the makefiles of the GNU libc
+can be used.  Only some few stub rules must be written to get
+everything running.  Even handling of architecture dependent
+compilation is provided.  The GNU libc's sysdeps/ directory shows how
+to use this feature.
+
+
+~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~
+[Q16]	``When I use GNU libc on my Linux system by linking against
+	  to libc.so which comes with glibc all I get is a core dump.''
+
+[A16] {UD} It is not enough to simply link against the GNU libc
+library itself.  The GNU C library comes with its own dynamic linker
+which really conforms to the ELF API standard.  This dynamic linker
+must be used.
+
+Normally this is done by the compiler.  The gcc will use
+
+	-dynamic-linker /lib/ld-linux.so.1
+
+unless the user specifies her/himself a -dynamic-linker argument.  But
+this is not the correct name for the GNU dynamic linker.  The correct
+name is /lib/ld.so.1 which is the name specified in the SVr4 ABi.
+
+To change your environment to use GNU libc for compiling you need to
+change the `specs' file of your gcc.  This file is normally found at
+
+	/usr/lib/gcc-lib/<arch>/<version>/specs
+
+In this file you have to change a few things:
+
+- change `ld-linux.so.1' to `ld.so.1' (or to ld-linux.so.2, see below)
+
+- remove all expression `%{...:-lgmon}';  there is no libgmon in glibc
+
+
+Things are getting a bit more complicated if you have GNU libc
+installed in some other place than /usr, i.e., if you do not want to
+use it instead of the old libc.  In this case the needed startup files
+and libraries are not found in the regular places.  So the specs file
+must tell the compiler and linker exactly what to use.  Here is for
+example the gcc-2.7.2 specs file when GNU libc is installed at
+/usr:
+
+-----------------------------------------------------------------------
+*asm:
+%{V} %{v:%{!V:-V}} %{Qy:} %{!Qn:-Qy} %{n} %{T} %{Ym,*} %{Yd,*} %{Wa,*:%*}
+
+*asm_final:
+%{pipe:-}
+
+*cpp:
+%{fPIC:-D__PIC__ -D__pic__} %{fpic:-D__PIC__ -D__pic__} %{!m386:-D__i486__} %{posix:-D_POSIX_SOURCE} %{pthread:-D_REENTRANT}
+
+*cc1:
+%{profile:-p}
+
+*cc1plus:
+
+
+*endfile:
+%{!shared:crtend.o%s} %{shared:crtendS.o%s} crtn.o%s
+
+*link:
+-m elf_i386 %{shared:-shared}   %{!shared:     %{!ibcs:       %{!static: 	%{rdynamic:-export-dynamic} 	%{!dynamic-linker:-dynamic-linker /lib/ld-linux.so.2}} 	%{static:-static}}}
+
+*lib:
+%{!shared: %{pthread:-lpthread} 	%{profile:-lc_p} %{!profile: -lc}}
+
+*libgcc:
+-lgcc
+
+*startfile:
+%{!shared:      %{pg:gcrt1.o%s} %{!pg:%{p:gcrt1.o%s} 		       %{!p:%{profile:gcrt1.o%s} 			 %{!profile:crt1.o%s}}}}    crti.o%s %{!shared:crtbegin.o%s} %{shared:crtbeginS.o%s}
+
+*switches_need_spaces:
+
+
+*signed_char:
+%{funsigned-char:-D__CHAR_UNSIGNED__}
+
+*predefines:
+-D__ELF__ -Dunix -Di386 -Dlinux -Asystem(unix) -Asystem(posix) -Acpu(i386) -Amachine(i386)
+
+*cross_compile:
+0
+
+*multilib:
+. ;
+
+-----------------------------------------------------------------------
+
+The above is currently correct for ix86/Linux.  Because of
+compatibility issues on this platform the dynamic linker must have
+a different name: ld-linux.so.2.  So you have to replace
+
+	%{!dynamic-linker:-dynamic-linker=/home/gnu/lib/ld-linux.so.2}
+by
+	%{!dynamic-linker:-dynamic-linker=/home/gnu/lib/ld.so.1}
+
+in the above example specs file to make it work for other systems.
+
+Version 2.7.2.2 does and future versions of GCC will automatically
+provide the correct specs.
+
+
+~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~
+[Q17]	``Looking through the shared libc file I haven't found the
+	  functions `stat', `lstat', `fstat', and `mknod' and while
+	  linking on my Linux system I get error messages.  How is
+	  this supposed to work?''
+
+[A17] {RM} Believe it or not, stat and lstat (and fstat, and mknod)
+are supposed to be undefined references in libc.so.6!  Your problem is
+probably a missing or incorrect /usr/lib/libc.so file; note that this
+is a small text file now, not a symlink to libc.so.6.  It should look
+something like this:
+
+GROUP ( libc.so.6 ld.so.1 libc.a )
+
+
+~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~
+[Q18]	``The prototypes for `connect', `accept', `getsockopt',
+	  `setsockopt', `getsockname', `getpeername', `send',
+	  `sendto', and `recvfrom' are different in GNU libc from
+	  any other system I saw.  This is a bug, isn't it?''
+
+[A18] {UD} No, this is no bug.  This version of the GNU libc already
+follows the to-be-released POSIX.1g standard.  In this standard
+the type `size_t' is used for all parameters which describe a size.
+So better change now.
+
+This change is critical for system which have
+	sizeof (int) != sizeof (size_t)
+like the Alpha.
+
+
+~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~
+[Q19]	``My XXX kernel emulates a floating-point coprocessor for me.
+	  Should I enable --with-fp?''
+
+[A19] {UD} As `configure --help' shows the default value is `yes' and
+this should not be changed unless the FPU instructions would be
+invalid.  I.e., an emulated FPU is for the libc as good as a real one.
+
+
+~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~
+[Q20]	``How can I compile gcc 2.7.2.1 from the gcc source code using
+	  glibc 2.x?
+
+[A20] {AJ} There's only support for glibc 2.0 in gcc 2.7.2.2 or later.
+For 2.7.2.2 you should use the following patch and configure for
+e.g. i486-linux.
+-----------------------------------------------------------------------
+--- configure       Tue Feb 11 15:57:17 1997
++++ configure   Wed Feb 12 23:09:29 1997
+@@ -1021,7 +1021,7 @@
+                gnu_ld=yes
+                # GNU libc version 2 does not supply these;
+                # we want them from GCC.
+-               extra_parts="crtbegin.o crtend.o"
++               extra_parts="crtbegin.o crtbeginS.o crtend.o crtendS.o"
+                ;;
+         i[3456]86-go32-msdos | i[3456]86-*-go32)
+               cpu_type=i386
+-----------------------------------------------------------------------
+
+
+~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~
+[Q21]    ``On Linux I've got problems with the declarations in Linux
+           kernel headers.''
+
+[A21] {UD,AJ} On Linux, the use of kernel headers is reduced to a very
+minimum.  Besides giving Linus the possibility to change the headers
+more freely it has another reason: user level programs now do not
+always use the same types like the kernel does.
+
+I.e., the libc abstracts the use of types.  E.g., the sigset_t type is
+in the kernel 32 or 64 bits wide.  In glibc it is 1024 bits wide, in
+preparation for future development.  The reasons are obvious: we don't
+want to have a new major release when the Linux kernel gets these
+functionality. Consult the headers for more information about the changes.
+
+Therefore you shouldn't include Linux kernel header files directly if
+glibc has defined a replacement. Otherwise you might get undefined
+results because of type conflicts.
+
+
+~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~
+[Q22]	``When I try to compile code which uses IPv6 header and
+	  definitions on my Linux 2.x.y system I am in trouble.
+	  Nothing seems to work.''
+
+[A22] {UD} The problem is that the IPv6 development still has not reached
+a point where it is stable.  There are still lots of incompatible changes
+made and the libc headers have to follow.
+
+Currently (as of 970401) according to Philip Blundell <pjb27@cam.ac.uk>
+the required kernel version is 2.1.30.
+
+
+~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~
+[Q23]	``When compiling GNU libc I get lots of errors saying functions
+	  in glibc are duplicated in libgcc.''
+
+[A23] {EY} This is *exactly* the same problem that I was having.  The
+problem was due to the fact that the autoconfigure didn't correctly
+detect that linker flag --no-whole-archive was supported in my linker.
+In my case it was because I had run ./configure with bogus CFLAGS, and
+the test failed.
+
+One thing that is particularly annoying about this problem is that
+once this is misdetected, running configure again won't fix it unless
+you first delete config.cache.
+
+{UD} Starting with glibc-2.0.3 there should be a better test to avoid
+some problems of this kind.  The setting of CFLAGS is checked at the
+very beginning and if it is not usable `configure' will bark.
+
+
+
+~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~
+[Q24]	``I have set up /etc/nis.conf, and the Linux libc 5 with NYS
+	  works great.  But the glibc NIS+ doesn't seem to work.''
+
+[A24]	The glibc NIS+ implementation uses a /var/nis/NIS_COLD_START
+	file for storing information about the NIS+ server and their
+	public keys, because the nis.conf file do not contain all
+	necessary information.  You have to copy a NIS_COLD_START file
+	from a Solaris client (the NIS_COLD_START file is byte order
+	independend) or generate it new with nisinit from the nis-tools
+	(look at http://www-vt.uni-paderborn.de/~kukuk/linux/nisplus.html).
+
+
+~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~
+
+Answers were given by:
+{UD} Ulrich Drepper, <drepper@cygnus.com>
+{DMT} David Mosberger-Tang, <davidm@AZStarNet.com>
+{RM} Roland McGrath, <roland@gnu.ai.mit.edu>
+{HJL} H.J. Lu, <hjl@gnu.ai.mit.edu>
+{AJ} Andreas Jaeger, <aj@arthur.pfalz.de>
+{EY} Eric Youngdale, <eric@andante.jic.com>
+
+Local Variables:
+ mode:text
+End:

INSTALL

@@ -4,16 +4,13 @@ Library Maintenance
 How to Install the GNU C Library
 ================================
 
-   Installation of the GNU C library is relatively simple.
-
-   You need the latest version of GNU `make'.  Modifying the GNU C
-Library to work with other `make' programs would be so hard that we
-recommend you port GNU `make' instead.  *Really.*
+   Installation of the GNU C library is relatively simple, but usually
+requires several GNU tools to be installed already.
 
    To configure the GNU C library for your system, run the shell script
 `configure' with `sh'.  Use an argument which is the conventional GNU
 name for your system configuration--for example, `sparc-sun-sunos4.1',
-for a Sun 4 running Sunos 4.1.  *Note Installation:
+for a Sun 4 running SunOS 4.1.  *Note Installation:
 (gcc.info)Installation, for a full description of standard GNU
 configuration names.  If you omit the configuration name, `configure'
 will try to guess one for you by inspecting the system it is running
@@ -21,46 +18,6 @@ on.  It may or may not be able to come up with a guess, and the its
 guess might be wrong.  `configure' will tell you the canonical name of
 the chosen configuration before proceeding.
 
-   The GNU C Library currently supports configurations that match the
-following patterns:
-
-     alpha-dec-osf1
-     i386-ANYTHING-bsd4.3
-     i386-ANYTHING-gnu
-     i386-ANYTHING-isc2.2
-     i386-ANYTHING-isc3.N
-     i386-ANYTHING-sco3.2
-     i386-ANYTHING-sco3.2v4
-     i386-ANYTHING-sysv
-     i386-ANYTHING-sysv4
-     i386-force_cpu386-none
-     i386-sequent-bsd
-     i960-nindy960-none
-     m68k-hp-bsd4.3
-     m68k-mvme135-none
-     m68k-mvme136-none
-     m68k-sony-newsos3
-     m68k-sony-newsos4
-     m68k-sun-sunos4.N
-     mips-dec-ultrix4.N
-     mips-sgi-irix4.N
-     sparc-sun-solaris2.N
-     sparc-sun-sunos4.N
-
-   While no other configurations are supported, there are handy aliases
-for these few.  (These aliases work in other GNU software as well.)
-
-     decstation
-     hp320-bsd4.3 hp300bsd
-     i386-sco
-     i386-sco3.2v4
-     i386-sequent-dynix
-     i386-svr4
-     news
-     sun3-sunos4.N sun3
-     sun4-solaris2.N sun4-sunos5.N
-     sun4-sunos4.N sun4
-
    Here are some options that you should specify (if appropriate) when
 you run `configure':
 
@@ -76,8 +33,15 @@ you run `configure':
      building the GNU C Library.  On some systems, the library may not
      build properly if you do *not* use `gas'.
 
+`--with-gnu-binutils'
+     This option implies both `--with-gnu-ld' and `--with-gnu-as'.  On
+     systems where GNU tools are the system tools, there is no need to
+     specify this option.  These include GNU, GNU/Linux, and free BSD
+     systems.
+
+`--without-fp'
 `--nfp'
-     Use this option if your computer lacks hardware floating point
+     Use this option if your computer lacks hardware floating-point
      support.
 
 `--prefix=DIRECTORY'
@@ -89,6 +53,46 @@ you run `configure':
      subdirectories of `DIRECTORY'.  (You can also set this in
      `configparms'; see below.)
 
+`--enable-shared'
+`--disable-shared'
+     Enable or disable building of an ELF shared library on systems that
+     support it.  The default is to build the shared library on systems
+     using ELF when the GNU `binutils' are available.
+
+`--enable-profile'
+`--disable-profile'
+     Enable or disable building of the profiled C library, `-lc_p'.  The
+     default is to build the profiled library.  You may wish to disable
+     it if you don't plan to do profiling, because it doubles the build
+     time of compiling just the unprofiled static library.
+
+`--enable-omitfp'
+     Enable building a highly-optimized but possibly undebuggable
+     static C library.  This causes the normal static and shared (if
+     enabled) C libraries to be compiled with maximal optimization,
+     including the `-fomit-frame-pointer' switch that makes debugging
+     impossible on many machines, and without debugging information
+     (which makes the binaries substantially smaller).  An additional
+     static library is compiled with no optimization and full debugging
+     information, and installed as `-lc_g'.
+
+`--enable-bounded'
+`--disable-bounded'
+     Enable or disable building of the C library with support for bounded
+     pointers.  To do this one need the enhanced version of the GNU CC
+     with can generate code for bounded pointers.  This version of the
+     C library is necessary to run code which is also compiled using the
+     enhanced gcc for debugging purposes.
+
+There are two more options:
+
+`--with-gmp'
+`--with-gettext'
+     These options are not of much use for the normal installer of the
+     GNU libc.  Only maintainers need this to get automatic updates of
+     the files from these packages in the GNU C library source tree.
+
+
    The simplest way to run `configure' is to do it in the directory
 that contains the library sources.  This prepares to build the library
 in that very directory.
@@ -141,57 +145,110 @@ work with object files for the target you configured for.
 in the GNU C compiler, so you may need to compile the library with GCC.
 (In fact, all of the existing complete ports require GCC.)
 
-   The current release of the C library contains some header files that
-the compiler normally provides: `stddef.h', `stdarg.h', and several
-files with names of the form `va-MACHINE.h'.  The versions of these
-files that came with older releases of GCC do not work properly with
-the GNU C library.  The `stddef.h' file in release 2.2 and later of GCC
-is correct.  If you have release 2.2 or later of GCC, use its version
-of `stddef.h' instead of the C library's.  To do this, put the line
-`override stddef.h =' in `configparms'.  The other files are corrected
-in release 2.3 and later of GCC.  `configure' will automatically detect
-whether the installed `stdarg.h' and `va-MACHINE.h' files are
-compatible with the C library, and use its own if not.
-
-   There is a potential problem with the `size_t' type and versions of
-GCC prior to release 2.4.  ANSI C requires that `size_t' always be an
-unsigned type.  For compatibility with existing systems' header files,
-GCC defines `size_t' in `stddef.h' to be whatever type the system's
-`sys/types.h' defines it to be.  Most Unix systems that define `size_t'
-in `sys/types.h', define it to be a signed type.  Some code in the
-library depends on `size_t' being an unsigned type, and will not work
-correctly if it is signed.
-
-   The GNU C library code which expects `size_t' to be unsigned is
-correct.  The definition of `size_t' as a signed type is incorrect.
-Versions 2.4 and later of GCC always define `size_t' as an unsigned
-type, and GCC's `fixincludes' script massages the system's
-`sys/types.h' so as not to conflict with this.
-
-   In the meantime, we work around this problem by telling GCC
-explicitly to use an unsigned type for `size_t' when compiling the GNU C
-library.  `configure' will automatically detect what type GCC uses for
-`size_t' arrange to override it if necessary.
-
-   To build the library, type `make lib'.  This will produce a lot of
-output, some of which looks like errors from `make' (but isn't).  Look
-for error messages from `make' containing `***'.  Those indicate that
-something is really wrong.
+   To build the library and related programs, type `make'.  This will
+produce a lot of output, some of which may look like errors from `make'
+(but isn't).  Look for error messages from `make' containing `***'.
+Those indicate that something is really wrong.
 
    To build and run some test programs which exercise some of the
-library facilities, type `make tests'.  This will produce several files
+library facilities, type `make check'.  This will produce several files
 with names like `PROGRAM.out'.
 
    To format the `GNU C Library Reference Manual' for printing, type
-`make dvi'.  To format the Info version of the manual for on line
-reading with `C-h i' in Emacs or with the `info' program, type
-`make info'.
+`make dvi'.
 
    To install the library and its header files, and the Info files of
-the manual, type `make install', after setting the installation
-directories in `configparms'.  This will build things if necessary,
+the manual, type `make install'.  This will build things if necessary,
 before installing them.
 
+Recommended Tools to Install the GNU C Library
+----------------------------------------------
+
+   We recommend installing the following GNU tools before attempting to
+build the GNU C library:
+
+   * `make' 3.75
+
+     You need the latest version of GNU `make'.  Modifying the GNU C
+     Library to work with other `make' programs would be so hard that we
+     recommend you port GNU `make' instead.  *Really.* We recommend
+     version GNU `make' version 3.75 or later.
+
+   * GCC 2.7.2.1
+
+     On most platforms, the GNU C library can only be compiled with the
+     GNU C compiler.  We recommend GCC version 2.7.2 or later; earlier
+     versions may have problems.
+
+   * `binutils' 2.7
+
+     Using the GNU `binutils' (assembler, linker, and related tools) is
+     preferable when possible, and they are required to build an ELF
+     shared C library.  We recommend `binutils' version 2.7 or later;
+     earlier versions are known to have problems or to not support all
+     architectures.
+
+Supported Configurations
+------------------------
+
+   The GNU C Library currently supports configurations that match the
+following patterns:
+
+     alpha-ANYTHING-linux
+     alpha-ANYTHING-linuxecoff
+     iX86-ANYTHING-gnu
+     iX86-ANYTHING-linux
+     m68k-ANYTHING-linux
+     mips-ANYTHING-linux
+     sparc-ANYTHING-linux
+     powerpc-ANYTHING-linux
+
+   Former versions of this library used to support the following
+configurations but the current status is unknown:
+
+     alpha-dec-osf1
+     iX86-ANYTHING-bsd4.3
+     iX86-ANYTHING-isc2.2
+     iX86-ANYTHING-isc3.N
+     iX86-ANYTHING-sco3.2
+     iX86-ANYTHING-sco3.2v4
+     iX86-ANYTHING-sysv
+     iX86-ANYTHING-sysv4
+     iX86-force_cpu386-none
+     iX86-sequent-bsd
+     i960-nindy960-none
+     m68k-hp-bsd4.3
+     m68k-mvme135-none
+     m68k-mvme136-none
+     m68k-sony-newsos3
+     m68k-sony-newsos4
+     m68k-sun-sunos4.N
+     mips-dec-ultrix4.N
+     mips-sgi-irix4.N
+     sparc-sun-solaris2.N
+     sparc-sun-sunos4.N
+
+   Each case of `iX86' can be `i386', `i486', `i586', or `i686'.  All
+of those configurations produce a library that can run on any of these
+processors.  The library will be optimized for the specified processor,
+but will not use instructions not available on all of them.
+
+   While no other configurations are supported, there are handy aliases
+for these few.  (These aliases work in other GNU software as well.)
+
+     decstation
+     hp320-bsd4.3 hp300bsd
+     i486-gnu
+     i586-linux
+     i386-sco
+     i386-sco3.2v4
+     i386-sequent-dynix
+     i386-svr4
+     news
+     sun3-sunos4.N sun3
+     sun4-solaris2.N sun4-sunos5.N
+     sun4-sunos4.N sun4
+
 Reporting Bugs
 ==============
 
@@ -246,8 +303,10 @@ But what they do is fairly straightforward, and only requires that you
 define a few variables in the right places.
 
    The library sources are divided into subdirectories, grouped by
-topic.  The `string' subdirectory has all the string-manipulation
-functions, `stdio' has all the standard I/O functions, etc.
+topic.
+
+   The `string' subdirectory has all the string-manipulation functions,
+`math' has all the mathematical functions, etc.
 
    Each subdirectory contains a simple makefile, called `Makefile',
 which defines a few `make' variables and then includes the global
@@ -283,7 +342,9 @@ The basic variables that a subdirectory makefile defines are:
      data in a file called `TEST-PROGRAM.input'; it will be given to
      the test program on its standard input.  If a test program wants
      to be run with arguments, put the arguments (all on a single line)
-     in a file called `TEST-PROGRAM.args'.
+     in a file called `TEST-PROGRAM.args'.  Test programs should exit
+     with zero status when the test passes, and nonzero status when the
+     test indicates a bug in the library or error in building.
 
 `others'
      The names of "other" programs associated with this section of the
@@ -362,18 +423,24 @@ So the final list is `unix/bsd/vax unix/bsd unix/inet unix posix'.
    `sysdeps' has two "special" subdirectories, called `generic' and
 `stub'.  These two are always implicitly appended to the list of
 subdirectories (in that order), so you needn't put them in an `Implies'
-file, and you should not create any subdirectories under them.
-`generic' is for things that can be implemented in machine-independent
-C, using only other machine-independent functions in the C library.
-`stub' is for "stub" versions of functions which cannot be implemented
-on a particular machine or operating system.  The stub functions always
-return an error, and set `errno' to `ENOSYS' (Function not
-implemented).  *Note Error Reporting::.
+file, and you should not create any subdirectories under them intended
+to be new specific categories.  `generic' is for things that can be
+implemented in machine-independent C, using only other
+machine-independent functions in the C library.  `stub' is for "stub"
+versions of functions which cannot be implemented on a particular
+machine or operating system.  The stub functions always return an
+error, and set `errno' to `ENOSYS' (Function not implemented).  *Note
+Error Reporting::.
 
    A source file is known to be system-dependent by its having a
-version in `generic' or `stub'; every system-dependent function should
-have either a generic or stub implementation (there is no point in
-having both).
+version in `generic' or `stub'; every generally-available function whose
+implementation is system-dependent in should have either a generic or
+stub implementation (there is no point in having both).  Some rare
+functions are only useful on specific systems and aren't defined at all
+on others; these do not appear anywhere in the system-independent
+source code or makefiles (including the `generic' and `stub'
+directories), only in the system-dependent `Makefile' in the specific
+system's subdirectory.
 
    If you come across a file that is in one of the main source
 directories (`string', `stdio', etc.), and you want to write a machine-
@@ -605,10 +672,10 @@ level of the `sysdeps' hierarchy.  This directory contains
 subdirectories (and subdirectory trees) for various Unix variants.
 
    The functions which are system calls in most Unix systems are
-implemented in assembly code in files in `sysdeps/unix'.  These files
-are named with a suffix of `.S'; for example, `__open.S'.  Files ending
-in `.S' are run through the C preprocessor before being fed to the
-assembler.
+automatically generated from the `syscalls.list' files for the appropriate
+archirecture.  The format of the syscalls.list files is quite easy: only
+a few informations are necessary line the system call name, the number of
+arguments and such.  The files are run through the C preprocessor.
 
    These files all use a set of macros that should be defined in
 `sysdep.h'.  The `sysdep.h' file in `sysdeps/unix' partially defines
@@ -629,18 +696,107 @@ generated are `ioctls.h', `errnos.h', `sys/param.h', and `errlist.c'
 Contributors to the GNU C Library
 =================================
 
-   The GNU C library was written almost entirely by Roland McGrath, who
-now maintains it.  Some parts of the library were contributed or worked
-on by other people.
+   The GNU C library was written originally by Roland McGrath.  Some
+parts of the library were contributed or worked on by other people.
 
    * The `getopt' function and related code were written by Richard
      Stallman, David J. MacKenzie, and Roland McGrath.
 
-   * Most of the math functions are taken from 4.4 BSD; they have been
-     modified only slightly to work with the GNU C library.  The
-     Internet-related code (most of the `inet' subdirectory) and several
-     other miscellaneous functions and header files have been included
-     with little or no modification.
+   * The merge sort function `qsort' was written by Michael J. Haertel.
+
+   * The quick sort function used as a fallback by `qsort' was written
+     by Douglas C. Schmidt.
+
+   * The memory allocation functions `malloc', `realloc' and `free' and
+     related code were written by Michael J. Haertel.
+
+   * Fast implementations of many of the string functions (`memcpy',
+     `strlen', etc.) were written by Torbjorn Granlund.
+
+   * The `tar.h' header file was written by David J. MacKenzie.
+
+   * The port to the MIPS DECStation running Ultrix 4
+     (`mips-dec-ultrix4') was contributed by Brendan Kehoe and Ian
+     Lance Taylor.
+
+   * The DES encryption function `crypt' and related functions were
+     contributed by Michael Glad.
+
+   * The `ftw' function was contributed by Ian Lance Taylor.
+
+   * The startup code to support SunOS shared libraries was contributed
+     by Tom Quinn.
+
+   * The `mktime' function was contributed by Paul Eggert.
+
+   * The port to the Sequent Symmetry running Dynix version 3
+     (`i386-sequent-bsd') was contributed by Jason Merrill.
+
+   * The timezone support code is derived from the public-domain
+     timezone package by Arthur David Olson and his many contributors.
+
+   * The port to the DEC Alpha running OSF/1 (`alpha-dec-osf1') was
+     contributed by Brendan Kehoe, using some code written by Roland
+     McGrath.
+
+   * The port to SGI machines running Irix 4 (`mips-sgi-irix4') was
+     contributed by Tom Quinn.
+
+   * The port of the Mach and Hurd code to the MIPS architecture
+     (`mips-ANYTHING-gnu') was contributed by Kazumoto Kojima.
+
+   * The floating-point printing function used by `printf' and friends
+     and the floating-point reading function used by `scanf', `strtod'
+     and friends were written by Ulrich Drepper.  The multi-precision
+     integer functions used in those functions are taken from GNU MP,
+     which was contributed by Torbjorn Granlund.
+
+   * The internationalization support in the library, and the support
+     programs `locale' and `localedef', were written by Ulrich Drepper.
+     Ulrich Drepper adapted the support code for message catalogs
+     (`libintl.h', etc.) from the GNU `gettext' package, which he also
+     wrote.  He also contributed the `catgets' support and the entire
+     suite of multi-byte and wide-character support functions
+     (`wctype.h', `wchar.h', etc.).
+
+   * The implementations of the `nsswitch.conf' mechanism and the files
+     and DNS backends for it were designed and written by Ulrich
+     Drepper and Roland McGrath, based on a backend interface defined
+     by Peter Eriksson.
+
+   * The port to Linux i386/ELF (`i386-ANYTHING-linux') was contributed
+     by Ulrich Drepper, based in large part on work done in Hongjiu
+     Lu's Linux version of the GNU C Library.
+
+   * The port to Linux/m68k (`m68k-ANYTHING-linux') was contributed by
+     Andreas Schwab.
+
+   * Richard Henderson contributed the ELF dynamic linking code and
+     other support for the Alpha processor.
+
+   * David Mosberger-Tang contributed the port to Linux/Alpha
+     (`alpha-ANYTHING-linux').
+
+   * Stephen R. van den Berg contributed a highly-optimized `strstr'
+     function.
+
+   * Ulrich Drepper contributed the `hsearch' and `drand48' families of
+     functions; reentrant `...`_r'' versions of the `random' family;
+     System V shared memory and IPC support code; and several
+     highly-optimized string functions for iX86 processors.
+
+   * The math functions are taken from `fdlibm-5.1' by Sun
+     Microsystems, as modified by J.T. Conklin, Ian Lance Taylor,
+     Ulrich Drepper, Andreas Schwab, and Roland McGrath.
+
+   * The `libio' library used to implement `stdio' functions on some
+     platforms was written by Per Bothner and modified by Ulrich
+     Drepper.
+
+   * Some of the Internet-related code (most of the `inet'
+     subdirectory) and several other miscellaneous functions and
+     header files have been included from 4.4 BSD with little or no
+     modification.
 
      All code incorporated from 4.4 BSD is under the following
      copyright:
@@ -694,70 +850,7 @@ on by other people.
      changes to fit into the GNU C library and to fit the ANSI C
      standard, but the functional code is Berkeley's.
 
-   * The merge sort function `qsort' was written by Michael J. Haertel.
-
-   * The quick sort function used as a fallback by `qsort' was written
-     by Douglas C. Schmidt.
-
-   * The memory allocation functions `malloc', `realloc' and `free' and
-     related code were written by Michael J. Haertel.
-
-   * Fast implementations of many of the string functions (`memcpy',
-     `strlen', etc.) were written by Torbjorn Granlund.
-
-   * Some of the support code for Mach is taken from Mach 3.0 by CMU,
-     and is under the following copyright terms:
-
-               Mach Operating System
-               Copyright (C) 1991,1990,1989 Carnegie Mellon University
-               All Rights Reserved.
-
-          Permission to use, copy, modify and distribute this software
-          and its documentation is hereby granted, provided that both
-          the copyright notice and this permission notice appear in all
-          copies of the software, derivative works or modified
-          versions, and any portions thereof, and that both notices
-          appear in supporting documentation.
-
-          CARNEGIE MELLON ALLOWS FREE USE OF THIS SOFTWARE IN ITS "AS
-          IS" CONDITION.  CARNEGIE MELLON DISCLAIMS ANY LIABILITY OF
-          ANY KIND FOR ANY DAMAGES WHATSOEVER RESULTING FROM THE USE OF
-          THIS SOFTWARE.
-
-          Carnegie Mellon requests users of this software to return to
-
-                Software Distribution Coordinator
-                School of Computer Science
-                Carnegie Mellon University
-                Pittsburgh PA 15213-3890
-
-          or `Software.Distribution@CS.CMU.EDU' any improvements or
-          extensions that they make and grant Carnegie Mellon the
-          rights to redistribute these changes.
-
-   * The `tar.h' header file was written by David J. MacKenzie.
-
-   * The port to the MIPS DECStation running Ultrix 4
-     (`mips-dec-ultrix4') was contributed by Brendan Kehoe and Ian
-     Lance Taylor.
-
-   * The DES encryption function `crypt' and related functions were
-     contributed by Michael Glad.
-
-   * The `ftw' function was contributed by Ian Lance Taylor.
-
-   * The code to support SunOS shared libraries was contributed by Tom
-     Quinn.
-
-   * The `mktime' function was contributed by Noel Cragg.
-
-   * The port to the Sequent Symmetry running Dynix version 3
-     (`i386-sequent-bsd') was contributed by Jason Merrill.
-
-   * The timezone support code is derived from the public-domain
-     timezone package by Arthur David Olson.
-
-   * The Internet resolver code is taken directly from BIND 4.9.1,
+   * The Internet resolver code is taken directly from BIND 4.9.5,
      which is under both the Berkeley copyright above and also:
 
           Portions Copyright (C) 1993 by Digital Equipment Corporation.
@@ -780,15 +873,6 @@ on by other people.
           OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION
           WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
 
-   * The port to the DEC Alpha running OSF/1 (`alpha-dec-osf1') was
-     contributed by Brendan Kehoe, using some code written by Roland
-     McGrath.
-
-   * The floating-point printing function used by `printf' and friends
-     was written by Roland McGrath and Torbjorn Granlund.  The
-     multi-precision integer functions used in that function are taken
-     from GNU MP, which was contributed by Torbjorn Granlund.
-
    * The code to support Sun RPC is taken verbatim from Sun's
      RPCSRC-4.0 distribution, and is covered by this copyright:
 
@@ -824,9 +908,85 @@ on by other people.
                2550 Garcia Avenue
                Mountain View, California  94043
 
-   * The port to SGI machines running Irix 4 (`mips-sgi-irix4') was
-     contributed by Tom Quinn.
+   * Some of the support code for Mach is taken from Mach 3.0 by CMU,
+     and is under the following copyright terms:
 
-   * The port of the Mach and Hurd code to the MIPS architecture
-     (`mips-ANYTHING-gnu') was contribued by Kazumoto Kojima.
+               Mach Operating System
+               Copyright (C) 1991,1990,1989 Carnegie Mellon University
+               All Rights Reserved.
 
+          Permission to use, copy, modify and distribute this software
+          and its documentation is hereby granted, provided that both
+          the copyright notice and this permission notice appear in all
+          copies of the software, derivative works or modified
+          versions, and any portions thereof, and that both notices
+          appear in supporting documentation.
+
+          CARNEGIE MELLON ALLOWS FREE USE OF THIS SOFTWARE IN ITS "AS
+          IS" CONDITION.  CARNEGIE MELLON DISCLAIMS ANY LIABILITY OF
+          ANY KIND FOR ANY DAMAGES WHATSOEVER RESULTING FROM THE USE OF
+          THIS SOFTWARE.
+
+          Carnegie Mellon requests users of this software to return to
+
+                Software Distribution Coordinator
+                School of Computer Science
+                Carnegie Mellon University
+                Pittsburgh PA 15213-3890
+
+          or `Software.Distribution@CS.CMU.EDU' any improvements or
+          extensions that they make and grant Carnegie Mellon the
+          rights to redistribute these changes.
+
+   * The `getaddrinfo' function is written by Craig Metz and it has the
+     following copyright:
+
+	The Inner Net License, Version 2.00
+	===================================
+
+	The author(s) grant permission for redistribution and use in source and
+	binary forms, with or without modification, of the software
+	and documentation provided that the following conditions are met:
+
+	0. If you receive a version of the software that is
+	   specifically labelled as not being for redistribution
+	   (check the version message and/or README), you are not
+	   permitted to redistribute that version of the software in
+	   any way or form.
+	1. All terms of the all other applicable copyrights and
+	   licenses must be followed.
+	2. Redistributions of source code must retain the authors'
+	   copyright notice(s), this list of conditions, and the
+	   following disclaimer.
+	3. Redistributions in binary form must reproduce the authors'
+	   copyright notice(s), this list of conditions, and the
+	   following disclaimer in the documentation and/or other
+	   materials provided with the distribution.
+	4. All advertising materials mentioning features or use of
+	   this software must display the following acknowledgement
+	   with the name(s) of the authors as specified in the
+	   copyright notice(s) substituted where indicated:
+
+	This product includes software developed by <name(s)>, The Inner
+	Net, and other contributors.
+
+	5. Neither the name(s) of the author(s) nor the names of its
+	   contributors may be used to endorse or promote products
+	   derived from this software without specific prior written
+	   permission.
+
+	THIS SOFTWARE IS PROVIDED BY ITS AUTHORS AND CONTRIBUTORS ``AS
+	IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+	LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
+	FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT
+	SHALL THE AUTHORS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
+	INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+	DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+	SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+	OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+	LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+	(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF
+	THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY
+	OF SUCH DAMAGE.
+
+	If these license terms cause you a real problem, contact the author.

Make-dist

@@ -1,4 +1,4 @@
-# Copyright (C) 1991, 1992, 1993, 1994, 1995 Free Software Foundation, Inc.
+# Copyright (C) 1991, 92, 93, 94, 95, 96, 97 Free Software Foundation, Inc.
 # This file is part of the GNU C Library.
 
 # The GNU C Library is free software; you can redistribute it and/or
@@ -12,12 +12,14 @@
 # Library General Public License for more details.
 
 # You should have received a copy of the GNU Library General Public
-# License along with the GNU C Library; see the file COPYING.LIB.  If
-# not, write to the Free Software Foundation, Inc., 675 Mass Ave,
-# Cambridge, MA 02139, USA.
+# License along with the GNU C Library; see the file COPYING.LIB.  If not,
+# write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+# Boston, MA 02111-1307, USA.
 
 dist:
 
+# Make the value empty so ifdef fails if it's $(-subdir).
+subdir := $(subdir)
 ifdef subdir
 .. := ../
 else
@@ -27,16 +29,24 @@ endif
 include $(..)Makeconfig
 
 foo:=$(shell echo 'distribute=$(distribute)'>&2)
+foo:=$(shell echo 'dont_distribute=$(dont_distribute)'>&2)
 foo:=$(shell echo 'foobar=$(filter %.c %.S %.s %.h,$(distribute))'>&2)
 
 ifndef sysdep_dirs
 # Find all sysdep directories.
-export sysdep_dirs := $(shell find $(..)sysdeps -type d ! -name RCS -print)
+export sysdep_dirs := $(shell find $(..)sysdeps -type d \
+				   ! -name CVS ! -name RCS -print)
 else
 # Defined by the parent.
 sysdep_dirs := $(addprefix $(..),$(sysdep_dirs))
 endif
 
+# Don't distribute add-on subdirs.
+subdirs := $(filter-out $(add-ons),$(subdirs))
+
+# Make sure both stdio and libio get in, whichever is in use.
+subdirs += stdio libio
+
 sysdep-Subdir-files := $(wildcard $(addsuffix /Subdirs,$(sysdep_dirs)))
 ifdef sysdep-Subdir-files
 subdirs := $(sort $(subdirs) \
@@ -48,7 +58,7 @@ endif
 # where source files might be found.
 
 ifdef	subdir
-all-headers = $(headers)
+all-headers = $(filter-out $(sysdep_headers),$(headers))
 else
 +distinfo := $(shell MAKEFLAGS= MFLAGS= $(MAKE) -s no_deps=t \
 		     inhibit_interface_rules=t inhibit_mach_syscalls=t \
@@ -62,22 +72,33 @@ all-headers := $(sort $(headers) $(wildcard $(all-headers)))
 endif
 foo:=$(shell echo 'IS THIS WORKING??? all-headers=$(all-headers)' >&2)
 
+sources += $(addsuffix .c,$(elided-routines) \
+		          $(foreach l,$(extra-libs),$($l-routines)))
+
 # Find all sysdep sources and headers.
 +maybe-sysdeps := $(sources) $(sources:.c=.s) $(sources:.c=.S) $(all-headers) \
 		  $(filter %.c %.S %.s %.h %.sub,$(distribute))
 foo:=$(shell echo '+maybe-sysdeps=$(+maybe-sysdeps)'>&2)
 # Find all the files that have a stub or generic version.
-try-sysdeps := $(foreach dir,$(..)sysdeps/stub $(..)sysdeps/generic,\
+try-sysdeps := $(foreach dir,$(..)sysdeps/stub $(..)sysdeps/generic \
+			     $(..)sysdeps/libm-ieee754,\
 			     $(addprefix $(dir)/,$(+maybe-sysdeps)))
 foo:=$(shell echo 'try-sysdeps=$(try-sysdeps)'>&2)
 +sysdeps := $(wildcard $(try-sysdeps))
 foo:=$(shell echo 'stub/generic +sysdeps=$(+sysdeps)'>&2)
-+sysdep-names := $(sort $(notdir $(+sysdeps)))
++sysdep-names := $(sort $(patsubst $(..)sysdeps/generic/%,%,\
+				   $(patsubst $(..)sysdeps/stub/%,%,\
+				   $(patsubst $(..)sysdeps/libm-ieee754/%,%,\
+					      $(+sysdeps)))))
 foo:=$(shell echo '+sysdep-names=$(+sysdep-names)' >&2)
 
+ifdef subdir-dirs
+vpath % $(subdir-dirs)
+endif
+
 # Now find all the sysdep versions of those files.
-+sysdeps := $(wildcard $(foreach dir,$(sysdep_dirs) $(source_dirs),\
-				 $(addprefix $(dir)/, \
++sysdeps := $(foreach dir,$(sysdep_dirs) $(source_dirs),\
+		      $(wildcard $(addprefix $(dir)/, \
 					     $(+sysdep-names) \
 					     $(+sysdep-names:.c=.s) \
 					     $(+sysdep-names:.c=.S) \
@@ -91,33 +112,28 @@ sources := $(filter-out $(addsuffix .c,$(basename $(.S.s))),$(sources)) $(.S.s)
 
 +out := $(patsubst %.S,%.c,$(+sysdep-names:.s=.c)) \
 	$(addsuffix .c,$(sysdep_routines)) \
-	$(+subdir-nodist)
-#foo:=$(shell echo '+out=$(+out)' >&2; echo foofoo >&2)
-+tsrcs	:= $(filter-out $(+out) $(addprefix %/,$(+out)), \
-			$(sources) $(all-headers) $(distribute)) \
+	$(+subdir-nodist) $(dont_distribute)
+foo:=$(shell echo '+out=$(+out)' >&2; echo foofoo >&2)
++tsrcs	:= $(filter-out $(+out), $(sources) $(all-headers) $(distribute)) \
 	   $(+sysdeps)
-foo:=$(shell echo made +tsrcs >&2)
+foo:=$(shell echo 'made +tsrcs=$(+tsrcs)'>&2)
 foo:=$(shell echo generated='$(generated)' >&2)
-generated := $(sort $(generated) $(generated:.S=.c) $(generated:.s=.c))
-foo:=$(shell echo now generated='$(generated)' >&2)
+#generated := $(sort $(generated) $(generated:.S=.c) $(generated:.s=.c))
+#foo:=$(shell echo now generated='$(generated)' >&2)
 +tsrcs := $(sort $(filter-out $(generated),$(+tsrcs)))
 foo:=$(shell echo '+tsrcs=$(+tsrcs)'>&2)
 foo:=$(shell echo foobie, dammit! >&2)
 
 ifndef tardir
-rel+vers := $(shell sed -n -e 's/^.*libc_release.*\"\([^"]*\)";$$/\1/p' \
-			   -e 's/^.*libc_version.*\"\([^"]*\)";$$/\1/p' \
-		    < $(..)version.c)
-release := $(word 1,$(rel+vers))
-version := $(word 2,$(rel+vers))
+-include $(common-objpfx)version.mk
 export tardir := glibc-$(version)
 endif
 
 $(..)glibc-$(version):
 	ln -s . $@
 
-+tsrcs := $(+tsrcs) \
-	  TAGS
+#+tsrcs := $(+tsrcs) \
+#	  TAGS
 .PHONY: TAGS
 TAGS: $(..)MakeTAGS
 	$(MAKE) -f $< $@ -o subdir_TAGS
@@ -126,12 +142,11 @@ ifdef	   subdir
 
 foo:=$(shell echo subdir foo >&2)
 
-+tsrcs := Makefile $(+tsrcs)				\
-	  $(addsuffix .c,$(others) $(tests))		\
-	  $(wildcard $(addsuffix .input,$(tests))	\
-	  $(addsuffix .args,$(tests)))
++tsrcs := Makefile $(+tsrcs)					\
+	  $(addsuffix .c,$(others) $(tests) $(test-srcs))	\
+	  $(wildcard $(addsuffix .input,$(tests) $(test-srcs))	\
+	  $(addsuffix .args,$(tests) $(test-srcs)))
 +tardeps := $(strip $(+tsrcs))
-+tsrcs := $(addprefix $(tardir)/$(subdir)/,$(+tardeps))
 
 verbose = v
 
@@ -139,7 +154,8 @@ verbose = v
 dist: $(..)$(tardir) $(+tardeps)
 	@cd ..; if test -f dist.tar; then c=u; else c=c; fi;	\
 	$(+cmdecho) "cd ..; tar $${c}h$(verbose)f dist.tar ...";	\
-	tar $${c}h$(verbose)f dist.tar $(+tsrcs)
+	tar $${c}h$(verbose)f dist.tar \
+	    $(addprefix $(tardir)/$(subdir)/,$(filter-out $<,$^))
 
 else	# Parent makefile.
 
@@ -155,9 +171,7 @@ foo:=$(shell echo +sysdep-distfiles='$(+sysdep-distfiles)'>&2)
 		$(sysdep-Subdir-files)
 foo:=$(shell echo '+sysdep-dist=$(+sysdep-dist)' >&2)
 
-subdirs := $(filter-out crypt,$(subdirs))
-
-+sysdep-tsrcs := $(wildcard $(foreach file,Makefile Implies \
++sysdep-tsrcs := $(wildcard $(foreach file,Makefile Implies syscalls.list\
 				           configure configure.in,\
 				      $(addsuffix /$(file),$(sysdep_dirs)))) \
 		 $(+sysdep-dist)
@@ -170,26 +184,20 @@ mv -f $@.new $@
 test ! -d CVS || cvs commit -m'Regenerated: autoconf $(ACFLAGS) $<' $@
 endef
 
-configure: configure.in; $(autoconf-it)
-%/configure: %/configure.in; $(autoconf-it)
+configure: configure.in aclocal.m4; $(autoconf-it)
+%/configure: %/configure.in aclocal.m4; $(autoconf-it)
 
-.PHONY: dist
-dist: $(tardir).tar.gz $(tardir)-crypt.tar.gz
-
-$(tardir)-crypt.tar.gz: crypt/crypt.tar.gz
-	ln $< $@
-crypt/%: FORCE
-	$(MAKE) -C $(@D) $(@F)
-FORCE:
+dist: $(tardir).tar.gz
 
 subdir_dist: dist.tar
-dist.tar: $(tardir) $(+tsrcs)
+dist.tar: README $(tardir) $(+tsrcs)
 	tar chvf $@ $(addprefix $(tardir)/,$(filter-out $(tardir),$^))
 
 $(tardir).tar: dist.tar subdir_dist
-	tar xfv $< -C /tmp | doschk
-	tar covf $@ -C /tmp $(tardir)
-	-rm -fr /tmp/$(tardir) &
+	@echo Files listed here have names exceeding 14 chars.
+	tar xfv $< -C $${TMPDIR-/tmp} | sed -n '/[^/]\{15,\}/p'
+	tar covf $@ -C $${TMPDIR-/tmp} $(tardir)
+	-rm -fr $${TMPDIR-/tmp}/$(tardir) dist.tar &
 
 %.Z: %
 	compress -c $< > $@
@@ -205,12 +213,12 @@ $(dist-subdirs):
 	$(MAKE) -C $(patsubst dist-%,%,$@) dist
 
 # This is here instead of in Makefile so it can use $(release) and $(version).
-README: README.template version.c
+README: README.template version.h
 	-rm -f $@
 	sed -e 's/RELEASE/$(release)/' -e 's/VERSION/$(version)/' < $< > $@
 # Make it unwritable so I won't change it by mistake.
 	chmod 444 $@
-	test ! -d CVS || commit -m'Remade for $(release)-$(version)' $@
+	test ! -d CVS || cvs commit -m'Remade for $(release)-$(version)' $@
 
 
 endif	# Subdirectory vs. parent makefile

MakeTAGS

@@ -1,6 +1,6 @@
 # Make the TAGS files.
 
-# Copyright (C) 1992, 1994, 1995 Free Software Foundation, Inc.
+# Copyright (C) 1992, 1994, 1995, 1996 Free Software Foundation, Inc.
 # This file is part of the GNU C Library.
 
 # The GNU C Library is free software; you can redistribute it and/or
@@ -14,9 +14,9 @@
 # Library General Public License for more details.
 
 # You should have received a copy of the GNU Library General Public
-# License along with the GNU C Library; see the file COPYING.LIB.  If
-# not, write to the Free Software Foundation, Inc., 675 Mass Ave,
-# Cambridge, MA 02139, USA.
+# License along with the GNU C Library; see the file COPYING.LIB.  If not,
+# write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+# Boston, MA 02111-1307, USA.
 
 # Make this the default goal.
 TAGS:
@@ -39,26 +39,24 @@ tags_sources = $(all-sources) $(all-headers) $(all-dist)
 endif	# ctype
 endif	# No tags_sources
 
-sysdep-dirs := $(addprefix $(sysdep_dir)/,$(sysdirs))
+sysdep-dirs := $(full-config-sysdirs)
 
 ifndef sysdep_dirs
 # Find all sysdep directories.
-sysdep_dirs := $(shell find $(..)sysdeps -type d \
-					 ! -name RCS ! -name CVS -print)
+sysdep_dirs := $(shell find $(..)sysdeps \
+			    $(wildcard \
+				$(patsubst %,$(..)%/sysdeps,$(add-ons))) \
+			    -type d ! -name RCS ! -name CVS -print)
 endif
 
 # Find all sysdep dirs there are, but putting the ones
 # we are configured to use first and preserving their order.
-all-dirs := $(objdir) \
+all-dirs := $(subdir-dirs) \
+	    $(objdir) \
 	    $(sysdep-dirs) \
 	    $(source_dirs) \
 	    $(filter-out $(sysdep-dirs),$(sysdep_dirs))
 
-vpath %.h $(all-dirs)
-vpath %.c $(all-dirs)
-vpath %.S $(all-dirs)
-vpath %.s $(all-dirs)
-
 # Find all the subdirs there are, but putting the ones
 # we are configured to use first and preserving their order.
 ifndef subdir
@@ -77,21 +75,31 @@ else
 all-dist = $(distribute)
 endif
 
-sources += $(filter %.c %.s %.S,$(all-dist))
-headers += $(filter %.h,$(all-dist))
+# sources and headers must be simply expanded variables
+sources := $(sources) $(filter %.c %.s %.S,$(all-dist))
+headers := $(headers) $(filter %.h,$(all-dist))
 all-dist := $(filter-out %.h %.c %.s %.S,$(all-dist))
 
+sources += $(foreach lib,$(extra-libs),$($(lib)-routines:=.c))
+
 # All different versions of $(sources), preserving the configured sysdep
 # directory order.
-all-sources = $(shell find $(all-dirs) -maxdepth 1 \( -name fnord \
-			   $(foreach file,$(sort $(sources) $(sources:.c=.S) \
-						 $(sources:.c=.s)),\
-				     -o -name $(file)) \
-			   \) -print)
+# Files that are found in the current directory cannot occur in
+# sysdep directories, so don't bother searching them.
+sysdep-sources := $(filter-out $(wildcard $(sources)), $(sources))
+all-sources = $(wildcard $(sort $(sources) $(sources:.c=.S) $(sources:.c=.s)  \
+				$(others:=.c) $(tests:=.c) $(test-srcs:=.c))) \
+	      $(foreach dir,$(all-dirs),\
+			$(wildcard \
+			   $(addprefix $(dir)/,\
+				       $(sort $(sysdep-sources) \
+					      $(sysdep-sources:.c=.S) \
+					      $(sysdep-sources:.c=.s)))))
 
-all-headers = $(shell find $(all-dirs) -maxdepth 1 \( -name fnord \
-			   $(foreach file,$(headers),-o -name $(file)) \
-			   \) -print)
+sysdep-headers := $(filter-out $(wildcard $(headers)), $(headers))
+all-headers = $(wildcard $(headers)) \
+	      $(foreach dir,$(all-dirs),\
+			$(wildcard $(addprefix $(dir)/,$(sysdep-headers))))
 
 tags_sources := $(strip $(tags_sources))
 
@@ -100,7 +108,7 @@ ifdef subdir
 ifdef tags_sources
 	$(ETAGS) -o $@ $^
 else
-# No sources.  Create a dummy file. 
+# No sources.  Create a dummy file.
 	touch $@
 endif # tags_sources
 else # parent
@@ -116,3 +124,61 @@ $(subdirs:%=%/TAGS):
 	$(MAKE) -C $(@D) no_deps=t $(@F)
 
 endif # subdir
+
+ifndef XGETTEXT
+XGETTEXT = xgettext
+endif
+
+P = $(..)po
+
+ifdef subdir
+domain = $(subdir)
+else
+domain = libc-top
+endif
+
+define extract
+@rm -f $@.new
+$(XGETTEXT) --keyword=_ --keyword=N_ --add-comments=TRANS  --sort-output \
+	    --omit-header -n -d - $(XGETTEXTFLAGS-$(@F)) > $@.new $^
+mv -f $@.new $@
+endef
+
+text-srcs := $(filter %.c %.h %.cc %.C,$(tags_sources))
+$P/$(domain).pot: $(text-srcs)
+ifeq (,$(text-srcs))
+	cp /dev/null $@
+else
+	$(extract)
+endif
+
+all-pot = $P/libc-top.pot $P/subdirs.pot
+
+ifndef subdir
+# Collect all the subdir messages, massaging the file names in comments
+# to include the subdir name.
+$P/subdirs.pot: $(subdirs:%=$P/%.pot)
+	@rm -f $@.new
+	(for d in $(subdirs); \
+	 do sed "/^#:/s% % $$d/%g" $P/$$d.pot; done) > $@.new
+	mv -f $@.new $@
+
+# Get $(version) defined.
+include $(common-objpfx)version.mk
+
+# Combine all the messages into the final sorted template translation file.
+# The following code requires GNU date.
+$P/libc.pot: $(all-pot)
+	@rm -f $@.new
+	set `date -R`; disp="$$6"; \
+	sed -e 's/VERSION/$(version)/' \
+	    -e "s/DATE/`date +'%Y-%m-%d %H:%M'$$disp`/" \
+	    po/header.pot > $@.new
+	$(XGETTEXT) -d - --omit-header -n -s $^ >> $@.new
+	mv -f $@.new $@
+	test ! -d CVS || cvs ci -m'Regenerated from source files' $@
+
+$(subdirs:%=$P/%.pot): $P/%.pot: FORCE
+	$(MAKE) -C $* no_deps=t ../$@
+FORCE:
+endif

Makeconfig

@@ -1,4 +1,4 @@
-# Copyright (C) 1991, 1992, 1993, 1994, 1995 Free Software Foundation, Inc.
+# Copyright (C) 1991, 92, 93, 94, 95, 96, 97 Free Software Foundation, Inc.
 # This file is part of the GNU C Library.
 
 # The GNU C Library is free software; you can redistribute it and/or
@@ -12,9 +12,9 @@
 # Library General Public License for more details.
 
 # You should have received a copy of the GNU Library General Public
-# License along with the GNU C Library; see the file COPYING.LIB.  If
-# not, write to the Free Software Foundation, Inc., 675 Mass Ave,
-# Cambridge, MA 02139, USA.
+# License along with the GNU C Library; see the file COPYING.LIB.  If not,
+# write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+# Boston, MA 02111-1307, USA.
 
 #
 #	Makefile configuration options for the GNU C library.
@@ -23,6 +23,8 @@ ifneq (,)
 This makefile requires GNU Make.
 endif
 
+all: # Make this the default goal
+
 ifneq "$(origin +included-Makeconfig)" "file"
 
 +included-Makeconfig := yes
@@ -59,8 +61,8 @@ endif
 # $(common-objdir) is the place to put objects and
 # such that are not specific to a single subdir.
 ifdef objdir
-objpfx = $(objdir)/
-common-objpfx = $(objpfx)
+objpfx := $(patsubst %//,%/,$(objdir)/$(subdir)/)
+common-objpfx = $(objdir)/
 common-objdir = $(objdir)
 else
 objpfx :=
@@ -74,20 +76,36 @@ common-objdir = .
 endif
 endif
 
+# Root of the sysdeps tree.
+sysdep_dir := $(..)sysdeps
+export sysdep_dir := $(sysdep_dir)
 
 # Get the values defined by options to `configure'.
 include $(common-objpfx)config.make
 
+# Complete path to sysdep dirs.
+full-config-sysdirs := $(filter /%, $(config-sysdirs)) \
+		       $(addprefix $(..), $(filter-out /%, $(config-sysdirs)))
+export full-config-sysdirs := $(full-config-sysdirs)
+
 # Run config.status to update config.make and config.h.  We don't show the
 # dependence of config.h to Make, because it is only touched when it
 # changes and so config.status would be run every time; the dependence of
 # config.make should suffice to force regeneration and re-exec, and the new
 # image will notice if config.h changed.
-$(common-objpfx)config.make: $(common-objpfx)config.status
+$(common-objpfx)config.make: $(common-objpfx)config.status \
+			     $(..)config.make.in $(..)config.h.in
 	cd $(<D); $(SHELL) $(<F)
 
-# Force the user to configure before making.
-$(common-objpfx)config.status: $(..)configure
+# Find all the sysdeps configure fragments, to make sure we re-run
+# configure when any of them changes.
+$(common-objpfx)config.status: $(..)version.h $(..)configure \
+			       $(foreach dir,$(full-config-sysdirs),\
+					 $(wildcard \
+					   $(dir)/Implies) \
+					 $(patsubst %.in,%,\
+						    $(firstword $(wildcard \
+ $(addprefix $(dir)/,configure configure.in)))))
 	@cd $(@D); if test -f $(@F); then exec $(SHELL) $(@F) --recheck; else \
 	 echo The GNU C library has not been configured. >&2; \
 	 echo Run \`configure\' to configure it before building. >&2; \
@@ -99,13 +117,10 @@ ifneq ($(wildcard $(..)configparms),)
 include $(..)configparms
 endif
 ifneq ($(objpfx),)
-ifneq ($(wildcard $(objpfx)configparms),)
-include $(objpfx)configparms
+ifneq ($(wildcard $(common-objpfx)configparms),)
+include $(common-objpfx)configparms
 endif
 endif
-
-sysdep_dir := $(..)sysdeps
-export sysdep_dir := $(sysdep_dir)
 
 ####
 ####	These are the configuration variables.  You can define values for
@@ -134,11 +149,13 @@ endif
 ifndef libdir
 libdir = $(exec_prefix)/lib
 endif
+inst_libdir = $(install_root)$(libdir)
 
 # Where to install the shared library and dynamic linker.
 ifndef slibdir
 slibdir = $(exec_prefix)/lib
 endif
+inst_slibdir = $(install_root)$(slibdir)
 
 # Prefix to put on files installed in $(libdir).  For libraries `libNAME.a',
 # the prefix is spliced between `lib' and the name, so the linker switch
@@ -152,50 +169,64 @@ endif
 ifndef includedir
 includedir = $(exec_prefix)/include
 endif
+inst_includedir = $(install_root)$(includedir)
 
 # Where to install machine-independent data files.
 # These are the timezone database, and the locale database.
 ifndef datadir
 datadir = $(prefix)/share
 endif
+inst_datadir = $(install_root)$(datadir)
 
 # Where to install the timezone data files (which are machine-independent).
 ifndef zonedir
 zonedir = $(datadir)/zoneinfo
 endif
+inst_zonedir = $(install_root)$(zonedir)
 
 # Where to install the locale and message catalog data files (which are
 # machine-independent).
 ifndef localedir
 localedir = $(datadir)/locale
 endif
+inst_localedir = $(install_root)$(localedir)
 
 # Where to install the locale charmap source files.
-ifndef nlsdir
-nlsdir = $(datadir)/nls
+ifndef i18ndir
+i18ndir = $(datadir)/i18n
 endif
+inst_i18ndir = $(install_root)$(i18ndir)
 
 
 # Where to install programs.
 ifndef bindir
 bindir = $(exec_prefix)/bin
 endif
+inst_bindir = $(install_root)$(bindir)
 
 # Where to install administrative programs.
+ifndef rootsbindir
+rootsbindir = $(exec_prefix)/sbin
+endif
+inst_rootsbindir = $(install_root)$(rootsbindir)
+
 ifndef sbindir
 sbindir = $(exec_prefix)/sbin
 endif
+inst_sbindir = $(install_root)$(sbindir)
 
 # Where to install the Info files.
 ifndef infodir
 infodir = $(prefix)/info
 endif
+inst_infodir = $(install_root)$(infodir)
 
 # Where to install default configuration files.  These include the local
 # timezone specification and network data base files.
 ifndef sysconfdir
 sysconfdir = $(prefix)/etc
 endif
+inst_sysconfdir = $(install_root)$(sysconfdir)
 
 # What timezone should be the installed default (e.g., US/Eastern).
 # Run `make -C time echo-zonenames' to see a list of available zone names.
@@ -211,6 +242,17 @@ endif
 # localizing the configuration data elsewhere.
 ifndef localtime-file
 localtime-file = $(sysconfdir)/localtime
+inst_localtime-file = $(install_root)$(localtime-file)
+endif
+
+# What to use for leap second specifications in compiling the default
+# timezone files.  Set this to `/dev/null' for no leap second handling as
+# 1003.1 requires, or to `leapseconds' for proper leap second handling.
+# Both zone flavors are always available as `posix/ZONE' and `right/ZONE'.
+# This variable determines the default: if it's `/dev/null',
+# ZONE==posix/ZONE; if it's `leapseconds', ZONE==right/ZONE.
+ifndef leapseconds
+leapseconds = /dev/null
 endif
 
 # What timezone's DST rules should be used when a POSIX-style TZ
@@ -265,7 +307,7 @@ endif
 
 # Default flags to pass the C compiler.
 ifndef default_cflags
-default_cflags := -g
+default_cflags := -g -O
 endif
 
 # Flags to pass the C compiler when assembling preprocessed assembly code
@@ -276,13 +318,29 @@ ifndef asm-CPPFLAGS
 asm-CPPFLAGS =
 endif
 
+# Installed name of the startup code.
+ifneq ($(elf),yes)
+# When not using ELF, there is just one startfile, called crt0.o.
+start-installed-name = crt0.o
+else
+# In the ELF universe, crt0.o is called crt1.o, and there are
+# some additional bizarre files.
+start-installed-name = crt1.o
+have-initfini = yes
+endif
+
+
 # Command for linking programs with the C library.
 ifndef +link
 +link = $(CC) -nostdlib -nostartfiles -o $@ \
 	      $(sysdep-LDFLAGS) $(config-LDFLAGS) $(LDFLAGS)  \
-	      $(addprefix $(csu-objpfx),start.o $(+preinit)) \
-	      $(^:$(common-objpfx)libc%=$(link-libc)) \
-	      $(addprefix $(csu-objpfx),$(+postinit))
+	      $(addprefix $(csu-objpfx),$(start-installed-name)) \
+	      $(+preinit) $(+prector) \
+	      $(filter-out $(addprefix $(csu-objpfx),start.o \
+						     $(start-installed-name))\
+			   $(+preinit) $(link-extra-libs) \
+			   $(common-objpfx)libc% $(+postinit),$^) \
+	      $(link-extra-libs) $(link-libc) $(+postctor) $(+postinit)
 endif
 ifndef config-LDFLAGS
 ifeq (yes,$(build-shared))
@@ -291,8 +349,13 @@ endif
 endif
 ifndef link-libc
 ifeq (yes,$(build-shared))
-link-libc = -Wl,-rpath-link=$(common-objdir) -Wl,-rpath=$(default-rpath) \
-	    $(common-objpfx)libc.so$(libc.so-version) $(gnulib)
+# We need the versioned name of libc.so in the deps of $(others) et al
+# so that the symlink to libc.so is created before anything tries to
+# run the linked programs.
+link-libc = -Wl,-rpath-link=$(rpath-link) \
+	    $(common-objpfx)libc.so$(libc.so-version) \
+	    $(elfobjdir)/$(rtld-installed-name) \
+	    $(common-objpfx)libc.a $(gnulib)
 # Choose the default search path for the dynamic linker based on
 # where we will install libraries.
 ifneq ($(libdir),$(slibdir))
@@ -300,30 +363,40 @@ default-rpath = $(slibdir):$(libdir)
 else
 default-rpath = $(libdir)
 endif
+# This is how to find at build-time things that will be installed there.
+rpath-link = $(common-objdir):$(mathobjdir):$(elfobjdir):$(nssobjdir)
+mathobjdir := $(patsubst ../$(subdir),.,$(common-objpfx)math)
+elfobjdir := $(patsubst ../$(subdir),.,$(common-objpfx)elf)
+nssobjdir := $(patsubst ../$(subdir),.,$(common-objpfx)nss)
 else
 link-libc = $(common-objpfx)libc.a $(gnulib) $(common-objpfx)libc.a
 endif
 endif
+ifndef link-extra-libs
+ifeq (yes,$(build-shared))
+ifneq ($(common-objpfx),$(objpfx))
+link-extra-libs = $(foreach lib,$(LDLIBS-$(@F)),\
+	$(wildcard $(common-objpfx)$(lib).so$($(notdir $(lib)).so-version) \
+		   $(objpfx)$(lib).so$($(notdir $(lib)).so-version)))
+else
+link-extra-libs = $(foreach lib,$(LDLIBS-$(@F)),$(common-objpfx)$(lib).so$($(notdir $(lib)).so-version))
+endif
+else
+link-extra-libs = $(foreach lib,$(LDLIBS-$(@F)),$(common-objpfx)$(lib).a)
+endif
+endif
 ifndef gnulib
 gnulib := -lgcc
 endif
 ifeq ($(elf),yes)
-+preinit = crti.o
-+postinit = crtn.o
-endif
-ifdef objpfx
-csu-objpfx = $(objpfx)
-elf-objpfx = $(objpfx)
-else
-csu-objpfx = $(..)csu/
-elf-objpfx = $(..)elf/
-endif
-
-ifeq (yes,$(build-shared))
-ifndef rtld-installed-name
-rtld-installed-name = ld.so
-endif
++preinit = $(addprefix $(csu-objpfx),crti.o)
++postinit = $(addprefix $(csu-objpfx),crtn.o)
++prector = `$(CC) --print-file-name=crtbegin.o`
++postctor = `$(CC) --print-file-name=crtend.o`
 endif
+csu-objpfx = $(common-objpfx)csu/
+elf-objpfx = $(common-objpfx)elf/
+db-objpfx = $(common-objpfx)db/
 
 # How to run a program we just linked with our library.
 # The program binary is assumed to be $(word 2,$^).
@@ -332,11 +405,13 @@ ifneq (yes,$(build-shared))
 built-program-cmd = $(built-program-file)
 else
 comma = ,
+sysdep-library-path = \
+$(subst $(empty) ,:,$(strip $(patsubst -Wl$(comma)-rpath-link=%, %,\
+				       $(filter -Wl$(comma)-rpath-link=%,\
+						$(sysdep-LDFLAGS)))))
 define built-program-cmd
-LD_LIBRARY_PATH=$(common-objdir)$(patsubst -Wl$(comma)-rpath-link=%,:%,\
-					   $(filter -Wl$(comma)-rpath-link=%,\
-						    $(sysdep-LDFLAGS))) \
-$(elf-objpfx)ld.so $(built-program-file)
+LD_LIBRARY_PATH=$(rpath-link)$(patsubst %,:%,$(sysdep-library-path)) \
+$(elf-objpfx)$(rtld-installed-name) $(built-program-file)
 endef
 endif
 
@@ -349,7 +424,7 @@ RANLIB = ranlib
 endif
 
 # Extra flags to pass to GCC.
-+gccwarn := -Wall -Wwrite-strings -Wno-parentheses -Winline
++gccwarn := -Wall -Wwrite-strings -Wno-parentheses -Winline -Wstrict-prototypes
 
 # This is the program that generates makefile
 # dependencies from C source files.
@@ -372,7 +447,7 @@ M4 = m4
 .NOEXPORT:
 
 # We want to echo the commands we're running without
-# umpteem zillion filenames along with it (we use `...' instead)
+# umpteen zillion filenames along with it (we use `...' instead)
 # but we don't want this echoing done when the user has said
 # he doesn't want to see commands echoed by using -s.
 ifneq	"$(findstring s,$(MAKEFLAGS))" ""	# if -s
@@ -390,18 +465,13 @@ ifdef		CFLAGS
 endif		# CFLAGS
 endif	# +cflags
 
-# If none of the above worked, default to "-g".
+# If none of the above worked, default to "-g -O".
 ifeq	"$(strip $(+cflags))" ""
 +cflags	:= $(default_cflags)
 endif	# $(+cflags) == ""
 
-# If using gcc, add flags that only it will grok.
-ifneq	"$(findstring gcc,$(CC))" ""
 +cflags := $(+cflags) $(+gccwarn)
 +gcc-nowarn := -w
-else
-+gcc-nowarn :=
-endif	# gcc
 
 # Don't duplicate options if we inherited variables from the parent.
 +cflags	:= $(sort $(+cflags))
@@ -420,8 +490,10 @@ libio-include = -I$(..)libio
 
 # These are the variables that the implicit compilation rules use.
 CPPFLAGS = $(+includes) $(defines) -include $(..)libc-symbols.h \
-	   $(sysdep-CPPFLAGS) $(CPPFLAGS-$(suffix $@))
-override CFLAGS	= $(+cflags) $(sysdep-CFLAGS) $(CFLAGS-$(suffix $@))
+	   $(sysdep-CPPFLAGS) $(CPPFLAGS-$(suffix $@)) $(CPPFLAGS-$(<F)) \
+	   $(CPPFLAGS-$(@F))
+override CFLAGS	= $(+cflags) $(sysdep-CFLAGS) $(CFLAGS-$(suffix $@)) \
+		  $(CFLAGS-$(<F)) $(CFLAGS-$(@F))
 
 
 # This is the macro that the implicit linking rules use.
@@ -436,20 +508,22 @@ endif
 # to pass different flags for each flavor.
 libtypes = $(foreach o,$(object-suffixes),$(libtype$o))
 object-suffixes := .o
+all-object-suffixes := .o .so .po .go .bo
 libtype.o := lib%.a
 ifeq (yes,$(build-shared))
 # Under --enable-shared, we will build a shared library of PIC objects.
 # The PIC object files are named foo.so.
 object-suffixes += .so
 CPPFLAGS-.so = -DPIC
-CFLAGS-.so = -fPIC
+CFLAGS-.so = -fPIC -fno-common
 libtype.so := lib%_pic.a
 endif
 ifeq (yes,$(build-profile))
 # Under --enable-profile, we will build a static library of profiled objects.
 # The profiled object files are named foo.po.
 object-suffixes += .po
-CFLAGS-.po = -p
+CPPFLAGS-.po = -DPROF
+CFLAGS-.po = -pg
 libtype.po = lib%_p.a
 endif
 ifeq (yes,$(build-omitfp))
@@ -459,18 +533,113 @@ ifeq (yes,$(build-omitfp))
 object-suffixes += .go
 CFLAGS-.go = -g
 CFLAGS-.o = -g0 -O99 -fomit-frame-pointer
-CFLAGS-.so += $(CFLAGS.o)
+CFLAGS-.so += $(CFLAGS-.o)
 libtype.go = lib%_g.a
 endif
+ifeq (yes,$(build-bounded))
+# Under --enable-bounded, we build the library with `-fbounded-pointers -g'
+# to runtime bounds checking.  The bounded-pointer objects are named foo.bo.
+object-suffixes += .bo
+CPPFLAGS-.bo = -DBOUNDED_POINTERS
+CFLAGS-.bo = -g -fbounded-pointers
+libtype.bo = lib%_b.a
+endif
 
 
 +gnu-stabs = $(shell echo>&2 '*** BARF ON ME')
 
-ifneq ($(BUILD_CC),$(CC))
-cross-compiling := yes
+ifndef BUILD_CC
+BUILD_CC = $(CC)
+endif
+
+# Figure out the version numbers from version.h.
+
+$(common-objpfx)version.mk: $(..)version.h $(..)Makeconfig
+	sed -n -e 's/^.*RELEASE.*"\([^"]*\)".*$$/release=\1/p' \
+	       -e 's/^.*VERSION.*"\([^"]*\)".*$$/version=\1/p' \
+	    < $< > $@-new
+	mv -f $@-new $@
+
+ifeq (yes, $(build-shared))
+
+# Process the shlib-versions file, which tells us what shared library
+# version numbers to use when we install shared objects on this system.
+-include $(common-objpfx)soversions.mk
+$(common-objpfx)soversions.mk: $(..)shlib-versions $(..)Makeconfig \
+			       $(wildcard $(patsubst %, $(..)%/shlib-versions,\
+							$(add-ons))) \
+			       $(common-objpfx)config.make
+	(file="$(wildcard $(patsubst %,$(..)%/shlib-versions,$(add-ons))) \
+	       $(..)shlib-versions"; \
+	 for f in $$file; do \
+	   sed 's/#.*$$//' $$f | while read conf versions; do \
+	     test -n "$$versions" && \
+	     test `expr '$(config-machine)-$(config-vendor)-$(config-os)' \
+			: "$$conf"` != 0 || continue; \
+	     for v in $$versions; do \
+	       lib=`echo $$v | sed 's/=.*$$//'`; \
+	       if eval "test -z \"\$$vers_lib$$lib\""; then \
+		 eval vers_lib$${lib}=yes; \
+		 number=`echo $$v | sed "s/^.*=//"`; \
+		 case $$number in \
+		   [0-9]*) echo "$$lib.so-version=.$$number"; \
+			   echo "all-sonames+=$$lib.so\$$($$lib.so-version)";;\
+		   *) echo "$$lib.so-version=$$number"; \
+		      echo "all-sonames+=\$$($$lib.so-version)";;  \
+	         esac; \
+	       fi; \
+	     done; \
+	   done; \
+	 done;) > $@T; exit 0
+	mv -f $@T $@
+
+# Get $(version) defined with the release version number.
+-include $(common-objpfx)version.mk
+
+# Generate the header containing the names of all shared libraries.
+# We use a stamp file to avoid uncessary recompilations.
+before-compile += $(common-objpfx)gnu/lib-names.h
+$(common-objpfx)gnu/lib-names.h: $(common-objpfx)gnu/lib-names.stmp
+$(common-objpfx)gnu/lib-names.stmp: $(common-objpfx)soversions.mk
+	$(make-target-directory)
+	@rm -f ${@:stmp=T} $@
+	(echo '/* This file is automatically generated.';\
+	 echo '   It defines macros to allow user program to find the shared';\
+	 echo '   library files which come as part of GNU libc.  */';\
+	 echo '#ifndef __GNU_LIB_NAMES_H'; \
+	 echo '#define __GNU_LIB_NAMES_H	1'; \
+	 echo; \
+	 (libs='$(all-sonames)';\
+	  for l in $$libs; do \
+	    upname=`echo $$l | sed 's/[.]so.*//' | \
+		    tr 'abcdefghijklmnopqrstuvwxyz-' \
+		       'ABCDEFGHIJKLMNOPQRSTUVWXYZ_'`; \
+	    echo "#define	$${upname}_SO	\"$$l\""; \
+	  done;) | sort; \
+	 echo; \
+	 echo '#endif	/* gnu/lib-names.h */';) > ${@:stmp=T}
+	if test -r ${@:stmp=h} && cmp -s ${@:stmp=h} ${@:stmp=T}; \
+	then rm -f ${@:stmp=T}; \
+	else mv -f ${@:stmp=T} ${@:stmp=h}; fi
+	touch $@
+
+common-generated += gnu/lib-names.h gnu/lib-names.stmp
+
+# The name under which the run-time dynamic linker is installed.
+# We are currently going for the convention that `/lib/ld.so.1'
+# names the SVR4/ELF ABI-compliant dynamic linker.
+ifndef rtld-installed-name
+ifdef ld.so-version
+rtld-installed-name = $(ld.so-version)
 else
-cross-compiling := no
+rtld-installed-name = ld.so.1
+endif
 endif
 
+ifndef rtld-version-installed-name
+rtld-version-installed-name = ld-$(version).so
+endif
+
+endif # build-shared
 
 endif # Makeconfig not yet included

Makefile

@@ -1,4 +1,4 @@
-# Copyright (C) 1991, 92, 93, 94, 95, 96 Free Software Foundation, Inc.
+# Copyright (C) 1991, 92, 93, 94, 95, 96, 97 Free Software Foundation, Inc.
 # This file is part of the GNU C Library.
 
 # The GNU C Library is free software; you can redistribute it and/or
@@ -12,9 +12,9 @@
 # Library General Public License for more details.
 
 # You should have received a copy of the GNU Library General Public
-# License along with the GNU C Library; see the file COPYING.LIB.  If
-# not, write to the Free Software Foundation, Inc., 675 Mass Ave,
-# Cambridge, MA 02139, USA.
+# License along with the GNU C Library; see the file COPYING.LIB.  If not,
+# write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+# Boston, MA 02111-1307, USA.
 
 #
 #	Master Makefile for the GNU C library
@@ -36,13 +36,13 @@ mv -f $@.new $@
 test ! -d CVS || cvs commit -m'Regenerated: autoconf $(ACFLAGS) $<' $@
 endef
 
-configure: configure.in; $(autoconf-it)
-%/configure: %/configure.in; $(autoconf-it)
+configure: configure.in aclocal.m4; $(autoconf-it)
+%/configure: %/configure.in aclocal.m4; $(autoconf-it)
 
 include Makeconfig
 
 ifndef avoid-generated
-include $(objpfx)sysd-dirs
+-include $(objpfx)sysd-dirs
 define \n
 
 
@@ -51,10 +51,11 @@ sysdep-subdirs := $(subst $(\n), ,$(sysdep-subdirs))
 endif
 
 # These are the subdirectories containing the library source.
-subdirs = csu assert ctype db locale intl math setjmp signal stdlib	\
-	  stdio-common $(stdio) malloc string time dirent grp pwd	\
-	  posix io termios resource misc socket sysvipc gmon gnulib	\
-	  $(wildcard crypt) manual $(sysdep-subdirs) elf
+subdirs = csu assert ctype db locale intl catgets math setjmp signal stdlib \
+	  stdio-common $(stdio) malloc string wcsmbs time dirent grp pwd \
+	  posix io termios resource misc login socket sysvipc gmon gnulib \
+	  wctype manual shadow md5-crypt nss $(sysdep-subdirs) po argp \
+	  $(add-ons) elf
 export subdirs := $(subdirs)	# Benign, useless in GNU make before 3.63.
 
 # The mach and hurd subdirectories have many generated header files which
@@ -76,19 +77,25 @@ subdirs	:= $(filter mach,$(subdirs)) $(filter hurd,$(subdirs)) \
 +subdir_targets	:= subdir_lib objects objs others subdir_mostlyclean	\
 		   subdir_clean subdir_distclean subdir_realclean	\
 		   tests subdir_lint.out				\
+		   subdir_distinfo					\
 		   subdir_echo-headers subdir_echo-distinfo		\
-		   subdir_install $(addprefix install-,			\
-					      no-libc.a bin lib		\
-					      data headers others)
+		   subdir_install					\
+		   $(addprefix install-, no-libc.a bin lib data headers others)
 
 headers := errno.h sys/errno.h errnos.h limits.h values.h	\
-	   features.h gnu-versions.h
+	   features.h gnu-versions.h libc-lock.h xopen_lim.h
 aux	 = sysdep $(libc-init) version
+before-compile += $(objpfx)version-info.h
 
 echo-headers: subdir_echo-headers
 
 # What to install.
-install-others = $(includedir)/stubs.h
+install-others = $(inst_includedir)/gnu/stubs.h
+install-bin = glibcbug
+
+ifeq (yes,$(build-shared))
+install-others += $(inst_includedir)/gnu/lib-names.h
+endif
 
 ifeq (yes,$(gnu-ld))
 libc-init = set-init
@@ -106,6 +113,16 @@ include Makerules
 # Install from subdirectories too.
 install: subdir_install
 
+# Create linkfs for shared libraries using the `ldconfig' program is possible.
+# Ignore the error if we cannot update /etc/ld.so.cache.
+ifeq (no,$(cross-compiling))
+ifeq (yes,$(build-shared))
+install:
+	-test ! -x $(common-objpfx)elf/ldconfig || \
+	  $(common-objpfx)elf/ldconfig -d $(inst_slibdir) $(inst_libdir)
+endif
+endif
+
 # Build subdirectory lib objects.
 lib-noranlib: subdir_lib
 
@@ -114,20 +131,49 @@ ifeq (yes,$(build-shared))
 lib: $(common-objpfx)libc.so
 endif
 
-$(objpfx)sysd-dirs: $(+sysdir_pfx)config.make
-	(echo define sysdep-subdirs;					      \
-	 for dir in $(sysdirs); do					      \
-	   if [ -r $(sysdep_dir)/$$dir/Subdirs ]; then			      \
-	     sed 's/#.*$$//' $(sysdep_dir)/$$dir/Subdirs;		      \
-	   else true;							      \
-	   fi;								      \
-	 done;								      \
+# We have a versioning file for libc.so.
+#libc-map = libc.map
+
+all-Subdirs-files = $(wildcard $(addsuffix /Subdirs, $(config-sysdirs)))
+$(objpfx)sysd-dirs: $(+sysdir_pfx)config.make $(all-Subdirs-files)
+	(echo define sysdep-subdirs;				\
+	 sed 's/#.*$$//' $(all-Subdirs-files) /dev/null;	\
 	 echo endef) > $@-tmp
-	 mv -f $@-tmp $@
+	mv -f $@-tmp $@
+
+all-Banner-files = $(wildcard $(addsuffix /Banner, $(subdirs)))
+$(objpfx)version-info.h: $(+sysdir_pfx)config.make $(all-Banner-files)
+	(case $(config-os) in \
+	   linux*) version=`(echo -e "#include <linux/version.h>\nUTS_RELEASE"\
+			     | $(CC)  -E -P - | \
+			     sed -e 's/"\([^"]*\)".*/\1/p' -e d) 2>/dev/null`;\
+		   if [ -z "$$version" ]; then \
+		     if [ -r /proc/version ]; then \
+		       version=`sed 's/.*version \([^ ]*\) .*/>>\1<</' \
+				< /proc/version`; \
+		     else \
+		       version=`uname -r`; \
+		     fi; \
+		   fi; \
+		   echo -n "\"Compiled on a Linux $$version system "; \
+		   echo "on `date +%Y/%m/%d`.\\n\"" ;; \
+	   *) ;; \
+	 esac; \
+	 files="$(all-Banner-files)";				\
+	 if test -n "$$files"; then				\
+	   echo "\"Available extensions:";			\
+	   sed -e '/^#/d' -e 's/^[[:space:]]*/	/' $$files;	\
+	   echo "\"";						\
+	 fi) > $@T
+	mv -f $@T $@
+generated += version-info.h
+
+version.c-objects := $(addprefix $(objpfx)version,$(object-suffixes))
+$(version.c-objects): $(objpfx)version-info.h
 
 # Makerules creates a file `stub-$(subdir)' for each subdirectory, which
 # contains `#define __stub_FUNCTION' for each function which is a stub.
-# Here we paste all of these together into <stubs.h>.
+# Here we paste all of these together into <gnu/stubs.h>.
 
 subdir-stubs := $(foreach dir,$(subdirs),$(common-objpfx)stub-$(dir))
 
@@ -137,20 +183,35 @@ subdir-stubs := $(foreach dir,$(subdirs),$(common-objpfx)stub-$(dir))
 # iterates over all the subdirs; subdir_install in each subdir depends on
 # the subdir's stubs file.  Having more direct dependencies would result in
 # extra iterations over the list for subdirs and many recursive makes.
-$(includedir)/stubs.h: subdir_install
+$(inst_includedir)/gnu/stubs.h: subdir_install
 	@rm -f $(objpfx)stubs.h
 	(echo '/* This file is automatically generated.';\
 	 echo '   It defines a symbol `__stub_FUNCTION'\'' for each function';\
 	 echo '   in the C library which is a stub, meaning it will fail';\
 	 echo '   every time called, usually setting errno to ENOSYS.  */';\
 	 sort $(subdir-stubs)) > $(objpfx)stubs.h
-	$(INSTALL_DATA) $(objpfx)stubs.h $@
+	if test -r $@ && cmp -s $(objpfx)stubs.h $@; \
+	then echo 'stubs.h unchanged'; \
+	else $(INSTALL_DATA) $(objpfx)stubs.h $@; fi
 	rm -f $(objpfx)stubs.h
 
+ifeq (yes,$(build-shared))
+
+$(inst_includedir)/gnu/lib-names.h: $(common-objpfx)gnu/lib-names.h
+	if test -r $@ && cmp -s $< $@; \
+	then echo 'gnu/lib-names.h unchanged'; \
+	else $(INSTALL_DATA) $< $@; fi
+endif
+
+# The `glibcbug' script contains the version number and it shall be rebuild
+# whenever this changes or the `glibcbug.in' file.
+$(objpfx)glibcbug: $(common-objpfx)config.status glibcbug.in
+	cd $(<D); CONFIG_FILES=$(@F) CONFIG_HEADERS= $(SHELL) $(<F)
+
 # This makes the Info or DVI file of the documentation from the Texinfo source.
 .PHONY: info dvi
 info dvi:
-	$(MAKE) -C manual $@
+	$(MAKE) $(PARALLELMFLAGS) -C manual $@
 
 # This makes all the subdirectory targets.
 
@@ -164,7 +225,7 @@ all-subdirs-targets := $(foreach dir,$(subdirs),\
 # The action for each of those is to cd into the directory and make the
 # target there.
 $(all-subdirs-targets):
-	$(MAKE) -C $(@D) $(@F)
+	$(MAKE) $(PARALLELMFLAGS) -C $(@D) $(@F)
 
 .PHONY: $(+subdir_targets) $(all-subdirs-targets)
 
@@ -217,22 +278,35 @@ echo-distinfo: parent_echo-distinfo subdir_echo-distinfo
 parent_echo-distinfo:
 	@echo $(addprefix +header+,$(headers)) \
 	      $(addprefix +nodist+,$(generated))
+
+
+.PHONY: parent-tests
+tests: parent-tests
+
+# Run a test on the header files we use.
+parent-tests: $(objpfx)isomac
+	$(dir $<)$(notdir $<) '$(CC)' '$(+sysdep-includes)' > $<.out
+
+$(objpfx)isomac: isomac.c
+	$(native-compile)
 
 # Make the distribution tarfile.
 
-distribute  := README INSTALL NOTES COPYING.LIB COPYING NEWS		\
-	       ChangeLog ChangeLog.[0-9]				\
+distribute  := README INSTALL FAQ NOTES NEWS PROJECTS BUGS		\
+	       COPYING.LIB COPYING ChangeLog ChangeLog.[0-9]		\
 	       Makefile Makeconfig Makerules Rules Make-dist MakeTAGS	\
-	       extra-lib.mk o-iterator.mk				\
+	       extra-lib.mk o-iterator.mk isomac.c			\
 	       ansidecl.h mkinstalldirs move-if-change install-sh	\
 	       configure configure.in aclocal.m4 config.sub config.guess\
-	       config.make.in config-name.in Makefile.in		\
-	       munch-tmpl.c munch.awk sysdep.h set-hooks.h libc-symbols.h
+	       config.h.in config.make.in config-name.in Makefile.in	\
+	       autolock.sh rellns-sh munch-tmpl.c munch.awk interp.c	\
+	       sysdep.h set-hooks.h libc-symbols.h version.h shlib-versions \
+	       rpm/Makefile rpm/template rpm/rpmrc glibcbug.in
 
 distribute := $(strip $(distribute))
-generated := $(generated) stubs.h
+generated := $(generated) stubs.h version-info.h
 
-README: README.template version.c ; # Make-dist should update README.
+README: README.template version.h ; # Make-dist should update README.
 
 define format-me
 @rm -f $@
@@ -241,3 +315,14 @@ makeinfo --no-validate --no-warn --no-headers $< -o $@
 endef
 INSTALL: manual/maint.texi; $(format-me)
 NOTES: manual/creature.texi; $(format-me)
+manual/dir-add.texi:
+	$(MAKE) $(PARALLELMFLAGS) -C $(@D) $(@F)
+
+rpm/%: subdir_distinfo
+	$(MAKE) $(PARALLELMFLAGS) -C $(@D) subdirs='$(subdirs)' $(@F)
+
+# This is a special goal for people making binary distributions.  Normally
+# everybody uses the DES based crypt library but for the distribution we
+# need the only-MD5 based one as well.
+md5-crypt/libmd5crypt:
+	$(MAKE) $(PARALLELMFLAGS) -C $(@D) $(@F)

Makefile.in

@@ -2,5 +2,8 @@
 
 srcdir = @srcdir@
 
+# Uncomment the line below if you want to do parallel build.
+# PARALLELMFLAGS = -j 4
+
 all .DEFAULT:
-	$(MAKE) -C $(srcdir) objdir=`pwd` $@
+	$(MAKE) PARALLELMFLAGS="$(PARALLELMFLAGS)" -C $(srcdir) objdir=`pwd` $@

Makerules

@@ -1,4 +1,4 @@
-# Copyright (C) 1991, 1992, 1993, 1994, 1995 Free Software Foundation, Inc.
+# Copyright (C) 1991, 92, 93, 94, 95, 96, 97 Free Software Foundation, Inc.
 # This file is part of the GNU C Library.
 
 # The GNU C Library is free software; you can redistribute it and/or
@@ -12,9 +12,9 @@
 # Library General Public License for more details.
 
 # You should have received a copy of the GNU Library General Public
-# License along with the GNU C Library; see the file COPYING.LIB.  If
-# not, write to the Free Software Foundation, Inc., 675 Mass Ave,
-# Cambridge, MA 02139, USA.
+# License along with the GNU C Library; see the file COPYING.LIB.  If not,
+# write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+# Boston, MA 02111-1307, USA.
 
 #
 #	Common rules for making the GNU C library.  This file is included
@@ -25,6 +25,14 @@ ifneq (,)
 This makefile requires GNU Make.
 endif
 
+REQUIRED_MAKE_VERSION = 3.74
+REAL_MAKE_VERSION = $(firstword $(MAKE_VERSION))
+
+ifneq ($(REQUIRED_MAKE_VERSION), \
+       $(firstword $(sort $(REAL_MAKE_VERSION) $(REQUIRED_MAKE_VERSION))))
+Wrong GNU Make version.  See above for the version needed.
+endif
+
 
 ifdef	subdir
 ..	:= ../
@@ -36,8 +44,6 @@ ifneq	"$(findstring env,$(origin sources))" ""
 sources :=
 endif
 
-headers := $(headers) $(sysdep_headers)
-
 oPATH := $(PATH)
 PATH := this definition should take precedence over $(oPATH)
 ifeq ($(PATH),$(oPATH))
@@ -51,13 +57,13 @@ include $(..)Makeconfig
 endif
 
 # `configure' writes a definition of `config-sysdirs' in `config.make'.
-sysdirs = $(config-sysdirs)
+sysdirs = $(strip $(full-config-sysdirs))
 
 +sysdir_pfx = $(common-objpfx)
 
 export sysdirs := $(sysdirs)
 
-+sysdep_dirs := $(addprefix $(sysdep_dir)/,$(sysdirs))
++sysdep_dirs := $(full-config-sysdirs)
 ifdef objdir
 +sysdep_dirs := $(objdir) $(+sysdep_dirs)
 endif
@@ -65,36 +71,57 @@ endif
 # Add -I switches to get the right sysdep directories.
 # `+includes' in Makeconfig references $(+sysdep-includes).
 +sysdep-includes := $(addprefix -I,$(+sysdep_dirs))
+
+# The name of the symbol table archive member.  The default is suitable for
+# BSD style archives.  It can be overridden in sysdep Makefiles when SYSV
+# style archive are used.
+ifeq (no,$(elf))
+ar-symtab-name = __.SYMDEF
+else
+ar-symtab-name = # The null name is used in ELF archives.
+endif
+
+# This variable is used in ``include $(o-iterator)'' after defining
+# $(o-iterator-doit) to produce some desired rule using $o for the object
+# suffix, and setting $(object-suffixes-left) to $(object-suffixes); a copy
+# is produced for each object suffix in use.
+o-iterator = $(patsubst %,$(..)o-iterator.mk,$(object-suffixes-left))
 
 # Include any system-specific makefiles.
 
 # This is here so things in sysdep Makefiles can easily depend on foo.h as
 # appropriate and not worry about where foo.h comes from, which may be
 # system dependent and not known by that Makefile.
-vpath %.h $(subst $(empty) ,:,$(strip $(common-objpfx) \
-				      $(addprefix $(sysdep_dir)/,$(sysdirs)) \
-				      $(..)))
+vpath %.h $(subst $(empty) ,:,$(strip $(common-objpfx) $(objpfx) \
+				      $(+sysdep_dirs) $(..)))
 
 # Some sysdep makefiles use this to distinguish being included here from
 # being included individually by a subdir makefile (hurd/Makefile needs this).
 in-Makerules := yes
 
 ifndef avoid-generated
-include $(+sysdir_pfx)sysd-Makefile
-ifneq ($(sysd-Makefile-sysdirs),$(sysdirs))
+-include $(+sysdir_pfx)sysd-Makefile
+ifneq ($(sysd-Makefile-sysdirs),$(config-sysdirs))
 sysd-Makefile-force = FORCE
 FORCE:
 endif
 $(+sysdir_pfx)sysd-Makefile: $(+sysdir_pfx)config.make $(..)Makerules \
 			     $(sysd-Makefile-force)
 	-@rm -f $@T
-	(echo 'sysd-Makefile-sysdirs := $(sysdirs)';			      \
-	 for dir in $(sysdirs); do		   			      \
-	   file=sysdeps/$$dir/Makefile;					      \
-	   if [ -f $(..)$$file ]; then					      \
-	     echo include "\$$(..)$$file";				      \
+	(echo 'sysd-Makefile-sysdirs := $(config-sysdirs)';		      \
+	 for dir in $(config-sysdirs); do	   			      \
+	   file=$$dir/Makefile;						      \
+	   case $$dir in						      \
+	     /*) rel= ;;						      \
+	     *)  rel=$(..) ;;						      \
+	   esac;							      \
+	   if [ -f $$rel$$file ]; then					      \
+	     case $$dir in						      \
+	       /*) echo include "$$file" ;;				      \
+	       *)  echo include "\$$(..)$$file" ;;			      \
+	     esac;							      \
 	   else true; fi;						      \
-	 done; \
+	 done;								      \
 	 echo 'sysd-Makefile-done=t') > $@T
 	mv -f $@T $@
 endif
@@ -136,9 +163,9 @@ endif
 # have source in .s files, and thus do not in fact need a .d file.
 # So we must define rules to make .d files for .s files.
 define make-dummy-dep
-$(addprefix ln $(objpfx)dummy.d ,$(filter-out $(wildcard $@),$@))
+$(addprefix ln $(common-objpfx)dummy.d ,$(filter-out $(wildcard $@),$@))
 endef
-$(objpfx)dummy.d:
+$(common-objpfx)dummy.d:
 	echo '# .s files cannot contain includes, so they need no deps.' > $@
 
 # It matters that this set of rules, for compiling from sources in
@@ -146,20 +173,25 @@ $(objpfx)dummy.d:
 # generated sysdep rules in included from sysd-rules below.  When
 # compiling in the source tree, generated sources go into the current
 # directory, and those should be chosen before any sources in sysdeps.
-$(objpfx)%.o: %.S $(before-compile); $(compile-command.S)
-$(objpfx)%.so: %.S $(before-compile); $(compile-command.S)
-$(objpfx)%.po: %.S $(before-compile); $(compile-command.S)
-$(objpfx)%.go: %.S $(before-compile); $(compile-command.S)
+define o-iterator-doit
+$(objpfx)%$o: %.S $(before-compile); $$(compile-command.S)
+endef
+object-suffixes-left := $(object-suffixes)
+include $(o-iterator)
 $(objpfx)%.d: %.S $(before-compile); $(+make-deps)
-$(objpfx)%.o: %.s $(before-compile); $(compile-command.s)
-$(objpfx)%.so: %.s $(before-compile); $(compile-command.s)
-$(objpfx)%.po: %.s $(before-compile); $(compile-command.s)
-$(objpfx)%.go: %.s $(before-compile); $(compile-command.s)
-$(objpfx)%.d: %.s $(objpfx)dummy.d; $(make-dummy-dep)
-$(objpfx)%.o: %.c $(before-compile); $(compile-command.c)
-$(objpfx)%.so: %.c $(before-compile); $(compile-command.c)
-$(objpfx)%.po: %.c $(before-compile); $(compile-command.c)
-$(objpfx)%.go: %.c $(before-compile); $(compile-command.c)
+
+define o-iterator-doit
+$(objpfx)%$o: %.s $(before-compile); $$(compile-command.s)
+endef
+object-suffixes-left := $(object-suffixes)
+include $(o-iterator)
+$(objpfx)%.d: %.s $(common-objpfx)dummy.d; $(make-dummy-dep)
+
+define o-iterator-doit
+$(objpfx)%$o: %.c $(before-compile); $$(compile-command.c)
+endef
+object-suffixes-left := $(object-suffixes)
+include $(o-iterator)
 $(objpfx)%.d: %.c $(before-compile); $(+make-deps)
 
 # Omit the objpfx rules when building in the source tree, because
@@ -167,20 +199,25 @@ $(objpfx)%.d: %.c $(before-compile); $(+make-deps)
 ifdef objpfx
 # Define first rules to find the source files in $(objpfx).
 # Generated source files will end up there.
-$(objpfx)%.o: $(objpfx)%.S $(before-compile); $(compile-command.S)
-$(objpfx)%.so: $(objpfx)%.S $(before-compile); $(compile-command.S)
-$(objpfx)%.po: $(objpfx)%.S $(before-compile); $(compile-command.S)
-$(objpfx)%.go: $(objpfx)%.S $(before-compile); $(compile-command.S)
+define o-iterator-doit
+$(objpfx)%$o: $(objpfx)%.S $(before-compile); $$(compile-command.S)
+endef
+object-suffixes-left := $(object-suffixes)
+include $(o-iterator)
 $(objpfx)%.d: $(objpfx)%.S $(before-compile); $(+make-deps)
-$(objpfx)%.o: $(objpfx)%.s $(before-compile); $(compile-command.s)
-$(objpfx)%.so: $(objpfx)%.s $(before-compile); $(compile-command.s)
-$(objpfx)%.po: $(objpfx)%.s $(before-compile); $(compile-command.s)
-$(objpfx)%.go: $(objpfx)%.s $(before-compile); $(compile-command.s)
-$(objpfx)%.d: $(objpfx)%.s $(objpfx)dummy.d; $(make-dummy-dep)
-$(objpfx)%.o: $(objpfx)%.c $(before-compile); $(compile-command.c)
-$(objpfx)%.so: $(objpfx)%.c $(before-compile); $(compile-command.c)
-$(objpfx)%.po: $(objpfx)%.c $(before-compile); $(compile-command.c)
-$(objpfx)%.go: $(objpfx)%.c $(before-compile); $(compile-command.c)
+
+define o-iterator-doit
+$(objpfx)%$o: $(objpfx)%.s $(before-compile); $$(compile-command.s)
+endef
+object-suffixes-left := $(object-suffixes)
+include $(o-iterator)
+$(objpfx)%.d: $(objpfx)%.s $(common-objpfx)dummy.d; $(make-dummy-dep)
+
+define o-iterator-doit
+$(objpfx)%$o: $(objpfx)%.c $(before-compile); $$(compile-command.c)
+endef
+object-suffixes-left := $(object-suffixes)
+include $(o-iterator)
 $(objpfx)%.d: $(objpfx)%.c $(before-compile); $(+make-deps)
 endif
 
@@ -198,9 +235,9 @@ endif
 # included.  It might define inhibit-sysdep-asm, which would affect the
 # contents of sysd-rules.
 ifdef sysd-Makefile-done
-include $(+sysdir_pfx)sysd-rules
-ifneq ($(sysd-rules-sysdirs),$(sysdirs))
-# The value of $(sysdirs) the sysd-rules was computed for
+-include $(+sysdir_pfx)sysd-rules
+ifneq ($(sysd-rules-sysdirs),$(config-sysdirs))
+# The value of $(+sysdep_dirs) the sysd-rules was computed for
 # differs from the one we are using now.  So force a rebuild of sysd-rules.
 sysd-rules-force = FORCE
 FORCE:
@@ -208,13 +245,16 @@ endif
 endif
 $(+sysdir_pfx)sysd-rules: $(+sysdir_pfx)config.make $(..)Makerules \
 			  $(wildcard $(foreach dir,$(sysdirs),\
-					       $(sysdep_dir)/$(dir)/Makefile))\
+					       $(dir)/Makefile))\
 			  $(sysd-rules-force)
 	-@rm -f $@T
-	(echo 'sysd-rules-sysdirs := $(sysdirs)';			      \
-	 for sysdir in $(sysdirs); do		   			      \
-	   dir="\$$(sysdep_dir)/$$sysdir";				      \
-	   for o in $(object-suffixes); do \
+	(echo 'sysd-rules-sysdirs := $(config-sysdirs)';		      \
+	 for sysdir in $(config-sysdirs); do				      \
+	   case $$sysdir in \
+	     /*) dir=$$sysdir ;; \
+	     *)  dir="\$$(..)$$sysdir" ;; \
+	   esac; \
+	   for o in $(all-object-suffixes); do \
 	     $(open-check-inhibit-asm) \
 	     echo "\$$(objpfx)%$$o: $$dir/%.S \$$(before-compile); \
 		  \$$(compile-command.S)";				      \
@@ -225,7 +265,7 @@ $(+sysdir_pfx)sysd-rules: $(+sysdir_pfx)config.make $(..)Makerules \
 		  \$$(compile-command.c)";				      \
 	   done; \
 	   $(open-check-inhibit-asm) \
-	   echo "\$$(objpfx)%.d: $$dir/%.s \$$(objpfx)dummy.d; \
+	   echo "\$$(objpfx)%.d: $$dir/%.s \$$(common-objpfx)dummy.d; \
 		\$$(make-dummy-dep)";			       \
 	   echo "\$$(objpfx)%.d: $$dir/%.S \$$(before-compile); \
 		\$$(+make-deps)";					      \
@@ -253,8 +293,12 @@ compile-command.c = $(compile.c) $(OUTPUT_OPTION)
 endif
 
 # GCC can grok options after the file name, and it looks nicer that way.
-compile.S = $(CC) $< -c $(CPPFLAGS) -DASSEMBLER $(asm-CPPFLAGS)
 compile.c = $(CC) $< -c $(CFLAGS) $(CPPFLAGS)
+compile.S = \
+  $(CC) $< -c $(CPPFLAGS) -DASSEMBLER $(asm-CPPFLAGS) $(ASFLAGS-$(suffix $@))
+COMPILE.S = \
+  $(CC) -c $(CPPFLAGS) -DASSEMBLER $(asm-CPPFLAGS) $(ASFLAGS-$(suffix $@))
+COMPILE.s = $(filter-out -pipe,$(CC)) -c $(ASFLAGS)
 
 # We need this for the output to go in the right place.  It will default to
 # empty if make was configured to work with a cc that can't grok -c and -o
@@ -263,15 +307,88 @@ OUTPUT_OPTION = -o $@
 
 S-CPPFLAGS = $(asm-CPPFLAGS)
 define +make-deps
+$(make-target-directory)
 -@rm -f $@
 $(+mkdep) $< $(CPPFLAGS) $($(<:$*.%=%)-CPPFLAGS) | \
-sed -e 's,$*\.o,$(foreach o,$(object-suffixes),$(@:.d=$o)) $@,' \
+sed \
+-e 's,$(subst .,\.,$*)\.o,$(foreach o,$(all-object-suffixes),$(@:.d=$o)) $@,' \
 $(sed-remove-objpfx) > $(@:.d=.T)
 mv -f $(@:.d=.T) $@
 endef
 ifneq (,$(objpfx))
-sed-remove-objpfx = -e 's@ $(subst @,\@,$(objpfx))@ $$(objpfx)@g' \
-		    -e 's@^$(subst @,\@,$(objpfx))@$$(objpfx)@g'
+# Continuation lines here are dangerous because they introduce spaces!
+define sed-remove-objpfx
+-e 's@ $(subst .,\.,$(subst @,\@,$(common-objpfx)))@ $$(common-objpfx)@g' \
+-e 's@^$(subst .,\.,$(subst @,\@,$(common-objpfx)))@$$(common-objpfx)@g'
+endef
+endif
+
+# Shared library building.
+
+ifeq (yes,$(build-shared))
+
+# Pattern rule to build a shared object from an archive of PIC objects.
+# This must come after the installation rules so Make doesn't try to
+# build shared libraries in place from the installed *_pic.a files.
+# $(LDLIBS-%.so) may contain -l switches to generate run-time dependencies
+# on other shared objects.
+lib%.so: lib%_pic.a; $(build-shlib)
+
+ifeq ($(have-no-whole-archive),yes)
+no-whole-archive = -Wl,--no-whole-archive
+else
+no-whole-archive =
+endif
+
+ifeq ($(versioning),yes)
+load-map-file = $($(@F:%.so=%)-map:%=-Wl,--version-script=%)
+else
+load-map-file =
+endif
+
+interp-obj = $(common-objpfx)interp.so
+$(interp-obj): $(common-objpfx)%.so: $(..)%.c
+	$(compile-command.c)
+common-generated += interp.so
+CFLAGS-interp.c = -D'RUNTIME_LINKER="$(slibdir)/$(rtld-installed-name)"'
+
+$(common-objpfx)libc.so: $(interp-obj)
+$(patsubst %,$(objpfx)%.so,$(extra-libs)): $(interp-obj)
+
+define build-shlib
+$(LINK.o) -shared -o $@ $(sysdep-LDFLAGS) $(config-LDFLAGS)  \
+	  -B$(csu-objpfx) $(load-map-file) \
+	  -Wl,-soname=lib$(libprefix)$(@F:lib%.so=%).so$($(@F)-version) \
+	  $(LDFLAGS.so) $(LDFLAGS-$(@F:lib%.so=%).so) \
+	  -L$(subst :, -L,$(rpath-link)) -Wl,-rpath-link=$(rpath-link) \
+	  -Wl,--whole-archive $^ $(no-whole-archive) \
+	  $(LDLIBS-$(@F:lib%.so=%).so)
+	  test -z "$($(@F)-version)" || \
+	    (rm -f $@$($(@F)-version); $(LN_S) $(@F) $@$($(@F)-version))
+endef
+
+# Don't try to use -lc when making libc.so itself.
+# Also omits crti.o and crtn.o, which we do not want
+# since we define our own `.init' section specially.
+LDFLAGS-c.so = -nostdlib -nostartfiles
+# But we still want to link libc.so against -lgcc.
+LDLIBS-c.so = -lgcc
+# Give libc.so an entry point and make it directly runnable itself.
+LDFLAGS-c.so += -e __libc_main
+# Use our own special initializer and finalizer files for libc.so.
+$(common-objpfx)libc.so: $(elfobjdir)/soinit.so \
+			 $(common-objpfx)libc_pic.a \
+			 $(elfobjdir)/sofini.so $(elfobjdir)/ld.so
+	$(build-shlib)
+endif
+
+# Some files must not be compiled with the exception handler mechanism
+# enabled (introduced in gcc-2.8).  Use $(no-exceptions) in the
+# appropriate CFLAGS definition.
+ifeq ($(have-no-exceptions),yes)
+no-exceptions = -fno-exceptions
+else
+no-exceptions =
 endif
 
 # Figure out the source filenames in this directory.
@@ -281,17 +398,13 @@ override sources	:= $(addsuffix .c,$(filter-out $(elided-routines),\
 						       $(sysdep_routines)))
 sysdep_routines := $(sysdep_routines)
 
+headers := $(headers) $(sysdep_headers)
+
 # This is the list of all object files, gotten by
 # replacing every ".c" in `sources' with a ".o".
 override objects	:= $(addprefix $(objpfx),$(sources:.c=.o))
 
 
-# This variable is used in ``include $(o-iterator)'' after defining
-# $(o-iterator-doit) to produce some desired rule using $o for the object
-# suffix, and setting $(object-suffixes-left) to $(object-suffixes); a copy
-# is produced for each object suffix in use.
-o-iterator = $(patsubst %,$(..)o-iterator.mk,$(object-suffixes))
-
 # The makefile may define $(extra-libs) with `libfoo libbar'
 # to build libfoo.a et al from the modules listed in $(libfoo-routines).
 ifdef extra-libs
@@ -311,7 +424,7 @@ endif
 
 ifdef +depfiles
 ifneq ($(no_deps),t)
-include $(+depfiles)
+-include $(+depfiles)
 endif
 endif
 
@@ -347,73 +460,91 @@ ARFLAGS := r$(verbose)
 lib: lib-noranlib $(foreach l,$(libtypes),$(patsubst %,$(common-objpfx)$l,c))
 
 # Pattern rule for libraries: depend on the __.SYMDEF member updated by ranlib.
-lib%.a: lib%.a(__.SYMDEF) ;
+lib%.a: lib%.a($(ar-symtab-name)) ;
+
+# For object-suffix $o, the list of objects with that suffix.
+# Makefiles can define `elide-routines.so = foo' to leave foo.so out.
+o-objects = $(patsubst %.o,%$o,$(filter-out $(patsubst %,$(objpfx)%.o,\
+						       $(elide-routines$o)),\
+					    $(objects)))
 
 libobjs: $(foreach o,$(object-suffixes),\
 		   $(common-objpfx)$(patsubst %,$(libtype$o),c)(\
-		   $(notdir $(objects:.o=$o))))
+		   $(notdir $(o-objects))))
 lib-noranlib: libobjs
 others: $(addprefix $(objpfx),$(install-lib))
 
-ifdef objects
+ifndef objects
+
+# Create the stamp$o files to keep the parent makefile happy.
+subdir_lib: $(foreach o,$(object-suffixes),$(objpfx)stamp$o-$(subdir))
+$(foreach o,$(object-suffixes),$(objpfx)stamp$o-$(subdir)):
+	$(make-target-directory)
+	rm -f $@; > $@
+else
 
 # Define a pattern rule that will match many targets libc.a(foo.%), for
 # each foo.o in $(objects) (% will just happen always to match `o').  This is
 # the only way to define a rule that updates many targets at once with one
-# sequence of commands.  We in fact define the pattern rule to match
-# targets libc.a(foo.%), libc_pic.a(foo.%), etc, to avoid repeating the rule.
-# Each match will only ever be called upon to make member objects of
-# the appropriate type in each library (i.e. libc_pic.a(foo.so)).
-$(foreach l,$(libtypes),\
-	  $(common-objpfx)$(patsubst %,$l,c)($(notdir $(objects:.o=.%)))): \
+# sequence of commands.
+define o-iterator-doit
+$(common-objpfx)$(patsubst %,$(libtype$o),c)(\
+$(addsuffix .%,$(filter-out $(elide-routines$o),$(notdir $(objects:.o=))))): \
   $(objpfx)stamp.%-$(subdir) ;
+endef
+object-suffixes-left := $(object-suffixes)
+include $(o-iterator)
 
 # The pattern rule tells Make to remake $(objpfx)stamp.%-$(subdir) as
-# the way to update all the foo.% object files in $(objects).
-# Now we define a static pattern rule to update each
-# $(objpfx)stamp.SUFFIX-$(subdir) timestamp file;
-# these rules (one explicit rule is generated for each object suffix)
-# will update the parent archive with
-$(foreach o,$(object-suffixes),$(objpfx)stamp$o-$(subdir)): \
-  $(objpfx)stamp%-$(subdir): $(objects:.o=%)
-	$(patsubst %,cd %;,$(objdir)) \
-	$(AR) cru$(verbose) ${O%-lib} \
-	      $(patsubst $(objpfx)%,%,$^)
-# `touch' won't let me touch a world-writable file I don't own.  Sigh.
-	rm -f $@
-	touch $@
-ifdef subdir
-O%-lib = $(filter ../,$(firstword $(objdir) ../))$(patsubst %,$(libtype$*),c)
-else
-O%-lib = $(patsubst %,$(libtype$*),c)
-endif
+# the way to update all the foo.% object files in $(objects).  Now we
+# define explicit rules to update each $(objpfx)stamp.SUFFIX-$(subdir)
+# timestamp file; these rules (one explicit rule is generated for each
+# object suffix) will update the parent archive with ar.  Use a static
+# pattern rule so $* is set to the object type during the commands.
+define o-iterator-doit
+$(objpfx)stamp$o-$(subdir): $(objpfx)stamp%-$(subdir): $(o-objects); $$(do-ar)
+endef
+object-suffixes-left := $(object-suffixes)
+include $(o-iterator)
+define do-ar
+topdir=`cd $(..).; pwd`; \
+$(patsubst %/,cd %;,$(objpfx)) \
+$(SHELL) $$topdir/autolock.sh ${O%-lib}.lck $(AR) cru$(verbose) ${O%-lib} \
+						  $(patsubst $(objpfx)%,%,$^)
+rm -f $@
+touch $@
+endef
+O%-lib = $(..)$(patsubst %,$(libtype$*),c)
 
 endif
 
-# Rules to update the __.SYMDEF member with ranlib.
-# To consolidate, each flavor library's __.SYMDEF member
-# depends on the imaginary intermediate file `symdef.SUFFIX',
-# where SUFFIX is that flavor's object suffix; then a pattern rule
-# "remakes" symdef.% depending on all the libc.a(foo.%) files in $(objects).
-$(common-objpfx)$(patsubst %,$(libtype.o),c)(__.SYMDEF): symdef.o
-$(common-objpfx)$(patsubst %,$(libtype.so),c)(__.SYMDEF): symdef.so
-$(common-objpfx)$(patsubst %,$(libtype.po),c)(__.SYMDEF): symdef.po
-$(common-objpfx)$(patsubst %,$(libtype.go),c)(__.SYMDEF): symdef.go
-symdef.%: $(foreach o,$(object-suffixes),\
-		    $(common-objpfx)$(patsubst %,$(libtype$o),c)(\
-	  $(patsubst $(objpfx)%.o,%.%,$(objects)))) \
-	  $(filter subdir_lib,$(firstword $(subdir) subdir_lib))
-# The last line above makes it also depend on subdir_lib for the parent.
-	$(RANLIB) $(common-objpfx)$(patsubst %,$(libtype.$*),c)
+# Rules to update the $(ar-symtab-name) member with ranlib,
+# one for each object flavor.
+define o-iterator-doit
+$(common-objpfx)$(patsubst %,$(libtype$o),c)($(ar-symtab-name)): \
+	  $(common-objpfx)$(patsubst %,$(libtype$o),c)(\
+	    $(patsubst $(objpfx)%,%,$(o-objects))) $(subdirs-stamp-o); \
+	$(SHELL) $$(..)./autolock.sh \
+	  $$(common-objpfx)$$(patsubst %,$$(libtype$o),c).lck \
+	  $$(RANLIB) $$(common-objpfx)$$(patsubst %,$$(libtype$o),c)
+endef
+ifndef subdir
+subdirs-stamps := $(foreach d,$(subdirs),$(common-objpfx)$d/stamp%-$d)
+subdirs-stamp-o = $(subst %,$o,$(subdirs-stamps))
+$(subdirs-stamps): subdir_lib;
+endif
+object-suffixes-left = $(object-suffixes)
+include $(o-iterator)
+
 
 # This makes all the object files.
 .PHONY: objects objs
-objects objs: $(foreach o,$(object-suffixes),$(objects:.o=$o)) \
+objects objs: $(foreach o,$(object-suffixes),$(o-objects)) \
 	      $(addprefix $(objpfx),$(extra-objs))
 
 # Canned sequence for building an extra library archive.
 define build-extra-lib
-$(patsubst %,cd %;,$(objdir)) \
+$(patsubst %/,cd %;,$(objpfx)) \
 $(AR) cru$(verbose) $(@:$(objpfx)%=%) \
       $(patsubst $(objpfx)%,%,$^)
 $(RANLIB) $@
@@ -441,13 +572,11 @@ $(make-target-directory)
 $(INSTALL_DATA) $< $@
 endef
 
-# Make the target directory if it doesn't exist.  Because of make's
-# directory cache, this will produce the `mkdir' command when the directory
-# already exists, if it didn't exist at the start of the `make' run.  The
-# `-' prefix ignores errors from mkdir, so there will just be some
-# gratuitous but harmless `File exists' messages.
+# Make the target directory if it doesn't exist, using the `mkinstalldirs'
+# script that does `mkdir -p' even if `mkdir' doesn't support that flag.
 define make-target-directory
-$(addprefix -mkdir ,$(filter-out $(wildcard $(@D:%/=%)),$(@D:%/=%)))
+$(addprefix $(..)./mkinstalldirs ,\
+	    $(filter-out $(wildcard $(@D:%/=%)),$(@D:%/=%)))
 endef
 
 # Any directory (parent or subdir) that has any object files to build
@@ -455,11 +584,11 @@ endef
 # to install everything it changes.
 ifdef objects
 installed-libcs := $(foreach o,$(object-suffixes),\
-			     $(libdir)/$(patsubst %,$(libtype$o),\
-						  $(libprefix)$(libc-name)))
+			     $(inst_libdir)/$(patsubst %,$(libtype$o),\
+						     $(libprefix)$(libc-name)))
 installed-libcs := $(filter-out %_pic.a,$(installed-libcs))
 install: $(installed-libcs)
-$(installed-libcs): $(libdir)/lib$(libprefix)%: lib
+$(installed-libcs): $(inst_libdir)/lib$(libprefix)%: lib
 	$(make-target-directory)
 	$(INSTALL_DATA) $(common-objpfx)lib$(*:$(libc-name)%=c%) $@
 # Running ranlib after installing makes the __.SYMDEF time stamp up to
@@ -476,13 +605,132 @@ endef
 install-lib.so := $(filter %.so,$(install-lib:%_pic.a=%.so))
 install-lib := $(filter-out %.so %_pic.a,$(install-lib))
 ifeq (yes,$(build-shared))
-install-lib-nosubdir: $(foreach so,$(install-lib.so),\
-  $(libdir)/$(patsubst $(libprefix)lib%,lib$(libprefix)%,\
-		       $(libprefix)$(so))$($(so)-version))
 
-install: $(slibdir)/libc.so$(libc.so-version)
-$(slibdir)/lib$(libprefix)c.so$(libc.so-version): $(common-objpfx)libc.so
-	$(do-install-so)
+install-lib-nosubdir: $(install-lib.so:%=$(inst_libdir)/%)
+
+# Find which .so's have versions.
+versioned := $(strip $(foreach so,$(install-lib.so),\
+			       $(patsubst %,$(so),$($(so)-version))))
+
+# Install all the unversioned shared libraries.
+$(addprefix $(inst_slibdir)/, $(filter-out $(versioned),$(install-lib.so))): \
+	$(inst_slibdir)/%.so: $(objpfx)%.so; $(do-install-program)
+
+ifneq ($(findstring -s,$(LN_S)),)
+define make-link
+rm -f $@.new
+$(SHELL) $(..)rellns-sh $< $@.new
+mv -f $@.new $@
+endef
+else
+# If we have no symbolic links don't bother with rellns-sh.
+define make-link
+rm -f $@.new
+$(LN_S) $< $@.new
+mv -f $@.new $@
+endef
+endif
+
+# XXX The following will have to be changed when `ldconfig' is available.
+ifneq (yes,$(cross-compiling))
+ifeq (yes,$(has-ldconfig))
+define make-shlib-link
+@:
+endef
+endif
+endif
+ifndef make-shlib-link
+define make-shlib-link
+$(make-link)
+endef
+endif
+
+ifdef libc.so-version
+# For a library specified to be version N, install three files:
+# libc.so	->	libc.so.N	(e.g. libc.so.6)
+# libc.so.6	->	libc-VERSION.so	(e.g. libc-1.10.so)
+
+$(inst_slibdir)/libc.so$(libc.so-version): $(inst_slibdir)/libc-$(version).so
+	$(make-shlib-link)
+$(inst_slibdir)/libc-$(version).so: $(common-objpfx)libc.so
+	$(do-install-program)
+install: $(inst_slibdir)/libc.so$(libc.so-version)
+
+ifndef subdir
+# What we install as libc.so for programs to link against is in fact a
+# link script.  It contains references for the various libraries we need.
+# The libc.so object is not complete since some functions are only defined
+# in libc.a and the dynamic linker is an etra object.
+install: $(inst_libdir)/libc.so
+$(inst_libdir)/libc.so: $(common-objpfx)libc.so$(libc.so-version) \
+			$(elfobjdir)/$(rtld-installed-name) \
+			$(inst_libdir)/lib$(libc-name).a
+	(echo '/* GNU ld script';\
+	 echo '   Use the shared library, but some functions are only in';\
+	 echo '   the static library, so try that secondarily.'; \
+	 echo '   The dynamic linker defines some functions used by $(<F),';\
+	 echo '	  but ld uses definitions from libc.a before examining the';\
+	 echo '   dependencies of $(<F) to find $(rtld-installed-name).  */';\
+	 echo 'GROUP ( $(^F) )') > $@.new
+	mv -f $@.new $@
+
+endif
+
+else
+install: $(inst_slibdir)/libc.so
+$(inst_slibdir)/libc.so: $(common-objpfx)libc.so
+	$(do-install-program)
+endif
+
+
+ifneq (,$(versioned))
+# Produce three sets of rules as above for all the smaller versioned libraries.
+
+define o-iterator-doit
+$(inst_libdir)/$o: $(inst_slibdir)/$o$($o-version); $$(make-link)
+endef
+object-suffixes-left := $(versioned)
+include $(o-iterator)
+
+# Make symlinks in the build directory, because the versioned names might
+# be referenced by a DT_NEEDED in another library.
+define o-iterator-doit
+$(objpfx)$o$($o-version): $(objpfx)$o; $$(make-link)
+endef
+object-suffixes-left := $(versioned)
+include $(o-iterator)
+
+
+ifeq (,$($(subdir)-version))
+define o-iterator-doit
+$(inst_slibdir)/$o$($o-version): $(inst_slibdir)/$(o:.so=)-$(version).so;
+	$$(make-shlib-link)
+endef
+object-suffixes-left := $(versioned)
+include $(o-iterator)
+
+define o-iterator-doit
+$(inst_slibdir)/$(o:.so=)-$(version).so: $(objpfx)$o; $$(do-install-program)
+endef
+object-suffixes-left := $(versioned)
+include $(o-iterator)
+else
+define o-iterator-doit
+$(inst_slibdir)/$o$($o-version): \
+  $(inst_slibdir)/$(o:.so=)-$($(subdir)-version).so;
+	$$(make-shlib-link)
+endef
+object-suffixes-left := $(versioned)
+include $(o-iterator)
+
+define o-iterator-doit
+$(inst_slibdir)/$(o:.so=)-$($(subdir)-version).so: $(objpfx)$o;
+	$$(do-install-program)
+endef
+object-suffixes-left := $(versioned)
+include $(o-iterator)
+endif
+endif
 
 define do-install-so
 $(do-install-program)
@@ -492,54 +740,62 @@ endef
 
 so-versions := $(sort $(foreach so,$(install-lib.so),.so$($(so)-version)))
 $(foreach v,$(so-versions),\
-	  $(libdir)/lib$(libprefix)%$v): $(common-objpfx)lib%.so
+	  $(inst_slibdir)/lib$(libprefix)%$v): $(common-objpfx)lib%.so
 	$(do-install-so)
 $(foreach v,$(so-versions),\
-	  $(libdir)/$(libprefix)%$v): $(common-objpfx)%.so
+	  $(inst_slibdir)/$(libprefix)%$v): $(common-objpfx)%.so
 	$(do-install-so)
 endif
 
 ifdef install-bin
-$(addprefix $(bindir)/,$(install-bin)): $(bindir)/%: $(objpfx)%
+$(addprefix $(inst_bindir)/,$(install-bin)): $(inst_bindir)/%: $(objpfx)%
+	$(do-install-program)
+endif
+ifdef install-rootsbin
+$(addprefix $(inst_rootsbindir)/,$(install-rootsbin)):
+   $(inst_rootsbindir)/%: $(objpfx)%
 	$(do-install-program)
 endif
 ifdef install-sbin
-$(addprefix $(sbindir)/,$(install-sbin)): $(sbindir)/%: $(objpfx)%
+$(addprefix $(inst_sbindir)/,$(install-sbin)): $(inst_sbindir)/%: $(objpfx)%
 	$(do-install-program)
 endif
 ifdef install-lib
 install-lib.a := $(filter lib%.a,$(install-lib))
 install-lib-non.a := $(filter-out lib%.a,$(install-lib))
 ifdef install-lib-non.a
-$(addprefix $(libdir)/$(libprefix),$(install-lib-non.a)): \
-  $(libdir)/$(libprefix)%: $(objpfx)%
+$(addprefix $(inst_libdir)/$(libprefix),$(install-lib-non.a)): \
+  $(inst_libdir)/$(libprefix)%: $(objpfx)%
 	$(do-install)
 endif
 ifdef install-lib.a
-$(install-lib.a:lib%.a=$(libdir)/lib$(libprefix)%.a): \
-  $(libdir)/lib$(libprefix)%.a: $(objpfx)lib%.a
+$(install-lib.a:lib%.a=$(inst_libdir)/lib$(libprefix)%.a): \
+  $(inst_libdir)/lib$(libprefix)%.a: $(objpfx)lib%.a
 	$(do-install)
 	$(patsubst %,$(RANLIB) $@,$(filter-out $(non-lib.a),$(<F)))
 endif
 endif
 ifdef install-data
-$(addprefix $(datadir)/,$(install-data)): $(datadir)/%: %;$(do-install)
+$(addprefix $(inst_datadir)/,$(install-data)): $(inst_datadir)/%: %;
+	$(do-install)
 endif
 headers := $(strip $(headers))
 ifdef headers
-$(addprefix $(includedir)/,$(headers)): \
-	$(includedir)/%: %;$(do-install)
+$(addprefix $(inst_includedir)/,$(headers)): $(inst_includedir)/%: %;
+	$(do-install)
 endif	# headers
 
-.PHONY: install-bin-nosubdir install-sbin-nosubdir install-lib-nosubdir \
-	install-data-nosubdir install-headers-nosubdir
-install-bin-nosubdir: $(addprefix $(bindir)/,$(install-bin))
-install-sbin-nosubdir: $(addprefix $(sbindir)/,$(install-sbin))
-install-lib-nosubdir: $(addprefix $(libdir)/,\
+.PHONY: install-bin-nosubdir install-rootsbin-nosubdir install-sbin-nosubdir \
+	install-lib-nosubdir install-data-nosubdir install-headers-nosubdir
+install-bin-nosubdir: $(addprefix $(inst_bindir)/,$(install-bin))
+install-rootsbin-nosubdir: \
+	$(addprefix $(inst_rootsbindir)/,$(install-rootsbin))
+install-sbin-nosubdir: $(addprefix $(inst_sbindir)/,$(install-sbin))
+install-lib-nosubdir: $(addprefix $(inst_libdir)/,\
 		       $(patsubst lib%.a,lib$(libprefix)%.a,$(install-lib.a)) \
 		       $(addprefix $(libprefix),$(install-lib-non.a)))
-install-data-nosubdir: $(addprefix $(datadir)/,$(install-data))
-install-headers-nosubdir: $(addprefix $(includedir)/,$(headers))
+install-data-nosubdir: $(addprefix $(inst_datadir)/,$(install-data))
+install-headers-nosubdir: $(addprefix $(inst_includedir)/,$(headers))
 install-others-nosubdir: $(install-others)
 
 # We need all the `-nosubdir' targets so that `install' in the parent
@@ -551,67 +807,42 @@ install-%:: install-%-nosubdir ;
 .PHONY: install install-no-libc.a-nosubdir
 install-no-libc.a-nosubdir: install-headers-nosubdir install-data-nosubdir\
 			    install-bin-nosubdir install-lib-nosubdir	\
-			    install-others-nosubdir install-sbin-nosubdir
+			    install-others-nosubdir install-rootsbin-nosubdir \
+			    install-sbin-nosubdir
 install: install-no-libc.a-nosubdir
 
-ifeq (yes,$(build-shared))
-# Pattern rule to build a shared object from an archive of PIC objects.
-# This must come after the installation rules so Make doesn't try to
-# build shared libraries in place from the installed *_pic.a files.
-# $(LDLIBS-%.so) may contain -l switches to generate run-time dependencies
-# on other shared objects.
-lib%.so: lib%_pic.a; $(build-shlib)
-
-define build-shlib
-$(LINK.o) -shared -o $@ $(sysdep-LDFLAGS) $(config-LDFLAGS)  \
-	  -Wl,-soname=lib$(libprefix)$(@F:lib%.so=%).so$($(@F)-version) \
-	  $(LDFLAGS.so) $(LDFLAGS-$(@F:lib%.so=%).so) \
-	  -Wl,-rpath-link=$(common-objdir) -Wl,-rpath=$(libdir) \
-	  -Wl,--whole-archive $^ $(LDLIBS-$(@F:lib%.so=%).so)
-endef
-
-# Don't try to use -lc when making libc.so itself.
-# Also omits crti.o and crtn.o, which we do not want
-# since we define our own `.init' section specially.
-LDFLAGS-c.so = -nostdlib -nostartfiles
-# Give libc.so an entry point and make it directly runnable itself.
-LDFLAGS-c.so += -e __libc_print_version
-# Use our own special initializer and finalizer files for libc.so.
-elfobjdir := $(firstword $(objdir) $(..)elf)
-$(common-objpfx)libc.so: $(elfobjdir)/soinit.so \
-			 $(common-objpfx)libc_pic.a \
-			 $(elfobjdir)/sofini.so
-	$(build-shlib)
-
-ifdef libc.so-version
-$(common-objpfx)libc.so$(libc.so-version): $(common-objpfx)libc.so
-	rm -f $@
-	ln -s $(<F) $@ || ln $< $@
-endif
-endif
-
-
 # Command to compile $< in $(objdir) using the native libraries.
 define native-compile
-cwd=`pwd`; cd $(@D); $(BUILD_CC) $(BUILD_CFLAGS) \
-	   $(addprefix $$cwd/,$^) -o $(@F)
+$(make-target-directory)
+$(patsubst %/,cd %;,$(objpfx)) \
+$(BUILD_CC) $($(basename $(<F))-CFLAGS) $(ALL_BUILD_CFLAGS) \
+	    $(firstword $(filter /%,$< $(shell pwd)/$<)) -o $(@F)
 endef
 
 # Command to compile $< in $(common-objdir) using the native libraries.
+# We must cd to $(objdir) anyway so that $(..)config.h is valid.
 define common-objdir-compile
-cd $(@D); $(BUILD_CC) $(BUILD_CFLAGS) $(<:$(common-objpfx)%=%) -o $(@F)
+$(patsubst %/,cd %;,$(objpfx)) \
+$(BUILD_CC) $($(basename $(<F))-CFLAGS) $(ALL_BUILD_CFLAGS) \
+	    $(firstword $(filter /%,$< $(shell pwd)/$<)) -o $(..)$(@F)
 endef
 
 # We always want to use configuration definitions.
-BUILD_CFLAGS = -include $(common-objpfx)config.h
+# Note that this is only used for commands running in $(objpfx).
+ALL_BUILD_CFLAGS = $(BUILD_CFLAGS) -include $(..)config.h
 
 # Support the GNU standard name for this target.
 .PHONY: check
 check: tests
 
 .PHONY: TAGS
-TAGS: distinfo $(..)MakeTAGS
-	$(MAKE) $(addprefix -f ,$^)
+TAGS: $(common-objpfx)distinfo-$(subdir) $(..)MakeTAGS
+	$(MAKE) $(addprefix -f ,$^) $@
+
+$(..)po/%.pot: $(common-objpfx)distinfo-$(subdir) $(..)MakeTAGS FORCE
+	$(MAKE) $(addprefix -f ,$(filter-out FORCE,$^)) $@
+FORCE:
+
 
 .PHONY: echo-headers
 echo-headers:
@@ -626,20 +857,24 @@ mostlyclean: common-mostlyclean
 
 # Remove the object files.
 common-mostlyclean:
-	-rm -f $(addprefix $(objpfx),$(tests) $(others) \
-				     $(addsuffix .o,$(tests) $(others)) \
-				     $(addsuffix .out,$(tests)))
+	-rm -f $(addprefix $(objpfx),$(tests) $(test-srcs) $(others) \
+				     $(addsuffix .o,$(tests) $(test-srcs) \
+						    $(others)) \
+				     $(addsuffix .out,$(tests) $(test-srcs)))
 	-rm -f $(addprefix $(objpfx),$(extra-objs) $(install-lib))
-	-rm -f core $(objpfx)stub-$(subdir)
+	-rm -f core $(common-objpfx)stub-$(subdir)
 	$(rmobjs)
 define rmobjs
 $(foreach o,$(object-suffixes),
--rm -f $(addprefix $(objpfx),stamp$o-$(subdir)) $(objects:.o=$o))
+-rm -f $(addprefix $(objpfx),stamp$o-$(subdir)) $(o-objects))
 endef
 
 # Also remove the dependencies and generated source files.
 common-clean: common-mostlyclean
 	-rm -f $(addprefix $(objpfx),$(generated)) $(+depfiles)
+	-rm -fr $(addprefix $(objpfx),$(generated-dirs))
+	-rm -f $(addprefix $(common-objpfx),$(common-generated))
+	-rm -f $(common-objpfx)distinfo-$(subdir)
 
 # Produce a file `stub-$(subdir)' which contains `#define __stub_FUNCTION'
 # for each function which is a stub.  We grovel over all the .d files
@@ -651,18 +886,18 @@ stubs: $(common-objpfx)stub-$(subdir)
 s = $(sysdep_dir)/stub
 $(common-objpfx)stub-$(subdir): $(+depfiles)
 # Use /dev/null since `...` might expand to empty.
-	s=`cd $s; /bin/pwd`; \
-	$(patsubst %,cd %;,$(objdir)) \
-	sed -n 's/^stub_warning *(\([^)]*\).*$$/#define __stub_\1/p' \
-	    `sed -n 's@^.*$s/\([a-z0-9_-]*\.c\).*$$@'"$$s"/'\1@p' \
-		 $(patsubst $(objpfx)%,%,$^) /dev/null` \
-	    /dev/null > $@T
+	(s=`cd $s; /bin/pwd`; \
+	 $(patsubst %/,cd %;,$(objpfx)) \
+	 sed -n 's/^stub_warning *(\([^)]*\).*$$/#define __stub_\1/p' \
+	     `sed -n 's@^.*$s/\([a-z0-9_-]*\.c\).*$$@'"$$s"/'\1@p' \
+		  $(patsubst $(objpfx)%,%,$^) /dev/null` \
+	     /dev/null) > $@T
 	mv -f $@T $@
 
 # Make the distribution tar file.
 
 .PHONY: dist
-dist: distinfo $(..)Make-dist
+dist: $(common-objpfx)distinfo-$(subdir) $(..)Make-dist
 	$(MAKE) -f $< -f $(word 2,$^) $(Make-dist-args)
 
 # Avoid depending on source files found in sysdeps dirs,
@@ -673,16 +908,25 @@ dist: $(filter-out %.c %.S %.s,$(distribute))
 # environment get too large.  Instead, we write all the information into
 # a generated makefile fragment `distinfo', and then include it with -f in
 # the sub-make that makes the distribution (above).
-distinfo: Makefile $(..)Makerules
+$(common-objpfx)distinfo-$(subdir): Makefile $(..)Makerules \
+				    $(wildcard $(foreach dir,$(sysdirs),\
+						         $(dir)/Makefile))
 	$(distinfo-vars)
 	mv -f $@.new $@
+.PHONY: subdir_distinfo distinfo
+subdir_distinfo: distinfo
+distinfo: $(common-objpfx)distinfo-$(subdir)
 
 define distinfo-vars
 rm -f $@.new
-$(foreach var,subdir sources elided-routines headers distribute \
-	      dont_distribute generated others tests,
-echo >> $@.new '$(var)	:= $($(var))')
-echo >> $@.new 'sources := $$(sources) $$(addsuffix .c,$$(elided-routines))'
+echo > $@.new 'subdir := $(subdir)'
+$(foreach var,subdir-dirs sources elided-routines sysdep_routines \
+	      headers sysdep_headers distribute dont_distribute generated \
+	      others tests extra-libs $(extra-libs:%=%-routines) \
+	      versioned \
+	      $(addprefix install-,lib lib.so data bin sbin others),
+echo >> $@.new '$(subdir)-$(var) := $($(var))'
+echo >> $@.new '$(var) = $$($(subdir)-$(var))')
 endef
 
 ifneq (,$(strip $(gpl2lgpl)))

NEWS

@@ -1,11 +1,68 @@
-GNU C Library NEWS -- history of user-visible changes.  2 January 1996
+GNU C Library NEWS -- history of user-visible changes.  1997-03-18
 
-Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc.
+Copyright (C) 1992, 93, 94, 95, 96, 97 Free Software Foundation, Inc.
 See the end for copying conditions.
 
-Please send GNU C library bug reports to bug-glibc@prep.ai.mit.edu.
+Please send GNU C library bug reports using the `glibcbug' script to
+<bugs@gnu.ai.mit.edu>.  Questions and suggestions should be send to
+<bug-glibc@prep.ai.mit.edu>.
 
-Version 1.10
+Version 2.1
+
+* An additional locale model to support C++ Standard Library locale
+  model and probably more was implemented by Ulrich Drepper.
+
+* Eric Youngdale and Ulrich Drepper implemented versioning of objects on
+  symbol level.
+
+* Miles Bader provided the `argp' function family to support hierachical
+  command line argument parsing, layered on top of getopt.
+
+* strtod accepts new hexadecimal floating-point format from ISO C 9X
+
+* printf has two new specifiers %a and %A to print hexadecimal flaoting-point
+  numbers
+
+* scanf recognizes the %A format for scanning floating point numbers
+
+* the new header <inttypes.h> from ISO C 9X provides information and
+  interfaces for the available integer types
+
+* the new header <complex.h> contains definitions of the complex math
+  functions from ISO C 9X
+
+* Thorsten Kukuk provided an implementation for NIS+, securelevel 0 and 1.
+  The implementation for securelevel 2 will follow as soon as the Diffie-
+  Hellman patent expired.
+
+* Andreas Jaeger provided a test suite for the math library
+
+Version 2.0.2
+
+* more bug fixes
+
+* add atoll function
+
+* fix complex problems in Berkeley DB code
+
+* fix math functions
+
+Version 2.0.1
+
+* fixed lots of header problems (especially Linux/GNU specific)
+
+* dynamic loader preserves all registers
+
+* Roland McGrath provided support for handling of auxiliary objects in
+  the ELF dynamic loader.
+
+* support for parallel builds is improved
+
+Version 2.0
+
+* GNU extensions are no longer declared by default.  To enable them you
+  must define the macro `_GNU_SOURCE' in your program or compile with
+  `-D_GNU_SOURCE'.
 
 * The library has changed from using GNU ld symbol aliases to using weak
   symbols where available.  The ELF object file format supports weak
@@ -16,8 +73,8 @@ Version 1.10
   of many files which contained only symbol aliases, reducing the size of
   the source and the compiled library; many other files were renamed to
   less cryptic names previously occupied by the symbol alias files.
-  There is a new header file <elf.h> and new library `-lelf' for
-  programs which operate on files in the ELF format.
+  There is a new header file <elf.h> for programs which operate on
+  files in the ELF format.
 
 * Converted to Autoconf version 2, so `configure' has more options.
   Run `configure --help' to see the details.
@@ -30,12 +87,33 @@ Version 1.10
   are enabled, the new library `-ldl' is available for arbitrary run-time
   loading of shared objects; its interface is defined in <dlfcn.h>.  The
   new header file <link.h> gives access to the internals of the run-time
-  dynamic linker, `ld.so'.
+  dynamic linker, `ld.so'.  The shell script `ldd' is similar to the
+  application of same name on other systems and it provides information
+  about dynamically linked binaries.
 
 * The C library now provides the run-time support code for profiling
   executables compiled with `-pg'.  Programs can control the profiling code
-  through the interface in <sys/gmon.h>.  The profiling code was adapted
-  from 4.4 BSD-Lite.
+  through the interface in <sys/gmon.h>.  The `gmon.out' files written by
+  the GNU C library can be read only by GNU `gprof' (from GNU binutils);
+  the support for this file format was contributed by David Mosberger-Tang.
+
+* The math code has been replaced with a math library based on fdlibm from
+  Sun, and modified by JT Conklin and Ulrich Drepper with i387 support, by
+  Ian Taylor with `float' functions and by Ulrich Drepper with `long double'
+  functions.  The math functions now reside in a separate library,  so
+  programs using them will need to use `-lm' their linking commands.
+
+* John C. Bowman contributed optimized ix87 assembler inline functions.
+
+* Ulrich Drepper has contributed support for an `/etc/nsswitch.conf'
+  mechanism similar to that found in Solaris 2.  This is now used for the
+  group, passwd, hosts, networks, services, protocols, rpc, ethers,
+  shadow, netgroup, publickey, and alias databases.  The `nsswitch.conf'
+  file controls what services are used for each individual database.  This
+  works by loading shared libraries with names specified in `nsswitch.conf',
+  so service modules can be changed or added at any time without even
+  relinking any program.  Currently there are the file, db, and NIS based
+  NSS services available.
 
 * The new functions `strtoq' and `strtouq' parse integer values from
   strings, like `strtol' and `strtoul', but they return `long long int' and
@@ -50,9 +128,26 @@ Version 1.10
   `strtod', `strtof', and `strtold'.  These new functions are perfectly
   accurate, and much faster than the old ones.
 
+* The implementation of the POSIX locale model was completely rewritten by
+  Ulrich Drepper.  This includes the new programs `localedef' and `locale'
+  to compile the POSIX locale definition.
+
+* The former dummy implementations of the strcoll and strxfrm function are
+  now replaced by fully functional code contributed by Ulrich Drepper.  The
+  collation information comes from the POSIX locale definitions.
+
 * The new header <langinfo.h> defines an interface for accessing
   various locale-dependent data (using the locale chosen with `setlocale').
 
+* Ulrich Drepper has contributed a new suite of functions for operation on
+  wide-character and multibyte-character strings, in <wchar.h>;
+  and classification and case conversion of wide characters, in <wctype.h>.
+  These new functions are conforming to the ISO C, Amendement 1 specification.
+
+* There is now a second implementation of the standard I/O library available.
+  It comes from GNU libg++ as was written by Per Bothner, heavily modified
+  by Hongjiu Lu and made thread safe by Ulrich Drepper.
+
 * You can now use positional parameter specifications in format strings
   for the `printf' and `scanf' families of functions.  For example,
   `printf ("Number %2$d, Mr %1$s\n", "Jones", 6);'' prints
@@ -80,11 +175,15 @@ Version 1.10
 * The new header file <fts.h> and suite of functions simplify programs that
   operate on directory trees.  This code comes from 4.4 BSD.
 
-* The resolver code has been updated from the BIND 4.9.3 release.
+* The resolver code has been updated from the BIND 4.9.5-P1 release.
+  Parts of the code were heavily modified by Ulrich Drepper to fit in the
+  NSS scheme used in glibc.
 
 * The new function `malloc_find_object_address' finds the starting address
-  of a malloc'd block, given any address within the block.  This can be
-  useful for debugging.
+  of a malloc'd block, given any address within the block;
+  `malloc_object_allocated_size' returns the size of an allocated block;
+  and `malloc_walk' lets you walk through all allocated blocks.  These can
+  be useful for debugging; see <malloc.h> for the interfaces.
 
 * There is a new malloc debugging hook `__memalign_hook'.
 
@@ -106,7 +205,9 @@ Version 1.10
 
 * The new functions `ecvt', `fcvt', and `gcvt' provide an obsolete interface
   for formatting floating-point numbers.  They are provided only for
-  compatibility; new programs should use `sprintf' instead.
+  compatibility; new programs should use `sprintf' instead.  There are
+  also equivalent function for the `long double' floating-point type and
+  all functions also exist in a reentrant form.
 
 * The new auxiliary library `-lutil' from 4.4 BSD contains various
   functions for maintaining the login-record files (primarily of use to
@@ -130,11 +231,28 @@ Version 1.10
 
 * Ulrich Drepper has updated the Linux-specific code, based largely
   on work done in Hongjiu Lu's version of GNU libc for Linux.
-  The GNU library now supports Linux versions 1.3.29 and later,
-  using the ELF object file format (i[345]86-*-linux).
+  The GNU library now supports Linux versions 2.0.10 and later,
+  using the ELF object file format (i[3456]86-*-linux).
+
+* Andreas Schwab has ported the C library to Linux/m68k (m68k-*-linux).
+
+* David Mosberger-Tang and Richard Henderson have ported the C library
+  to Linux/Alpha (alpha-*-linux).  Richard Henderson contributed the
+  dynamic linking support for ELF/Alpha.
+
+* Richard Henderson contributed several Alpha optimized assembler function
+  for arithmetic and string handling.
 
 * Ulrich Drepper has contributed a new set of message catalog functions to
-  support multiple languages, for use with his new package GNU gettext.
+  support multiple languages using the <libintl.h> interface, for use with
+  his new package GNU gettext.  Translation volunteers have contributed
+  catalogs of the library's messages in Spanish, German, and Korean.
+
+* For compatibility with XPG4, Ulrich Drepper has contributed the `gencat'
+  program and the `catgets' function for reading the catalog files it
+  creates.  (The <libintl.h> interface is preferred; we include the
+  <nl_types.h> interface using `catgets' only for source compatibility with
+  programs already written to use it.)
 
 * New header file <values.h> gives SVID-compatible names for <limits.h>
   constants.
@@ -151,7 +269,7 @@ Version 1.10
   `struct sockaddr *' type, does not generate a type-clash warning.
 
 * New function `error' declared in header file <error.h> is a convenient
-  function for printing error messages and optionally exitting; this is the
+  function for printing error messages and optionally exiting; this is the
   canonical function used in GNU programs.  The new functions `err', `warn',
   and friends in header file <err.h> are the canonical 4.4 BSD interface for
   doing the same thing.
@@ -160,13 +278,72 @@ Version 1.10
   POSIX.2 `glob' function to do ~ and {...} expansion.
 
 * New function `unsetenv' complements `setenv' for compatibility with 4.4 BSD.
+  `clearenv' which is used in POSIX.9 is also available.
 
 * New function `getsid' returns session ID number on systems that support it.
 
-* The 4.4 BSD `db' library has been incorporated into the GNU C library.
-  New header files <db.h> and <mpool.h> provide a rich set of functions for
-  several types of simple databases stored in memory and in files, and
-  <ndbm.h> is an old `ndbm'-compatbile interface using the `db' functions.
+* We have incorporated the 4.4 BSD `db' library (version 1.85).  New header
+  files <db.h> and <mpool.h> provide a rich set of functions for several
+  types of simple databases stored in memory and in files, and <ndbm.h> is
+  an old `ndbm'-compatible interface using the `db' functions.  Link with
+  `-ldb' to get these functions.
+
+* New macro `strdupa' copies a string like `strdup', but uses local stack
+  space from `alloca' instead of dynamic heap space from `malloc'.
+
+* New function `strnlen' is like `strlen' but searches only a given maximum
+  number of characters for the null terminator.  `stpncpy', `strndup' and
+  `strndupa' are similar variants for the `stpcpy', `strdup' and `strdupa'
+  function.
+
+* New function `statfs' in header <sys/statfs.h>.
+
+* The new <argz.h> and <envz.h> interfaces contributed by Miles Bader
+  provide convenient functions for operating on blocks of null-terminated
+  strings.
+
+* A new suite of functions in <utmp.h> handle all the details of reading
+  and writing the utmp file.
+
+* An implementation of the NIS/YP(tm) based NSS service was contributed by
+  Thorsten Kukuk.
+
+* Paul Eggert and Ulrich Drepper modified the `strftime' function to be
+  completely POSIX compliant and also implemented the extended functionality
+  to handle alternate digit representation and alternate era date formats.
+
+* Ulrich Drepper provided an implementation of the `strptime' function
+  defined in XPG4.2 which transforms a string into a `struct tm' value.
+
+* Paul Eggert provided the tzselect shell script as part of the timezone
+  code.  The shell script makes it easy to select the correct timezone
+  specification.
+
+* The implementation of the malloc family of functions is completely replaced
+  by a new implementation by Doug Lea with many improvements by Wolfram Gloger.
+  The implementation uses the mmap function (if available) and it is
+  optimized for the use in multi threaded programs.
+
+* Ulrich Drepper contributed a MD5 "encryption" for the crypt family of
+  functions.  This new functionality is usable by specifying a special
+  salt string and it is compatible with implementation on *BSD systems.
+
+* Lots of functions from the XPG4.2 standard were added by Ulrich Drepper:
+  `getsubopt' to handle second level command line options, `bsd_signal'
+  to access BSD style `signal' functionality, the obsolete `regexp' style
+  expression matcher.
+
+* the `lchown' function is available on system which support this
+  functionality.
+
+* The implementation of the shadow password handling function was contributed
+  by Ulrich Drepper.
+
+* David Mosberger-Tang changed the SunRPC implementation to be 64bit safe.
+
+* POSIX.1g support was added.  The <sys/select.h> header is available,
+  `isfdtype' and `pselect' are implemented.  Craig Metz contributed an
+  implementation of `getaddrinfo'.
 
 Version 1.09
 

NOTES

@@ -53,12 +53,26 @@ self-contained way.
 
  - Macro: _SVID_SOURCE
      If you define this macro, functionality derived from SVID is
-     included as well as the ANSI C, POSIX.1, and POSIX.2 material.
+     included as well as the ANSI C, POSIX.1, POSIX.2, and X/Open
+     material.
+
+ - Macro: _XOPEN_SOURCE
+     If you define these macro, functionality described in the X/Open
+     Portability Guide is included.  This is an superset of the POSIX.1
+     and POSIX.2 functionality and in fact `_POSIX_SOURCE' and
+     `_POSIX_C_SOURCE' get automatically be defined.
+
+     But as the great unifaction of all Unices there is also
+     functionality only available in BSD and SVID is included.
+
+     If the macro `_XOPEN_SOURCE_EXTENDED' is also defined, even more
+     functionality is available.  The extra functions will make all
+     functions available which are necessary for the X/Open Unix brand.
 
  - Macro: _GNU_SOURCE
      If you define this macro, everything is included: ANSI C, POSIX.1,
-     POSIX.2, BSD, SVID, and GNU extensions.  In the cases where POSIX.1
-     conflicts with BSD, the POSIX definitions take precedence.
+     POSIX.2, BSD, SVID, X/Open, and GNU extensions.  In the cases where
+     POSIX.1 conflicts with BSD, the POSIX definitions take precedence.
 
      If you want to get the full effect of `_GNU_SOURCE' but make the
      BSD definitions take precedence over the POSIX definitions, use
@@ -73,9 +87,23 @@ self-contained way.
      compiler or linker.  *Note:* If you forget to do this, you may get
      very strange errors at run time.
 
+ - Macro: _REENTRANT,_THREAD_SAFE
+     If you define one this macro, reentrant versions of several
+     functions get declared.  Some of the functions are specified in
+     POSIX.1c but many others are only available on a few other systems
+     or are unique to GNU libc.  The problem is that the
+     standardization of the thread safe C library interface still is
+     behind.
+
+     Unlike on some other systems no special version of the C library
+     must be used for linking.  There is only one version but while
+     compiling this it must have been specified to compile as thread
+     safe.
+
    We recommend you use `_GNU_SOURCE' in new programs.  If you don't
 specify the `-ansi' option to GCC and don't define any of these macros
-explicitly, the effect is the same as defining `_GNU_SOURCE'.
+explicitly, the effect is the same as defining `_POSIX_C_SOURCE' to 2
+and `_POSIX_SOURCE', `_SVID_SOURCE', and `_BSD_SOURCE' to 1.
 
    When you define a feature test macro to request a larger class of
 features, it is harmless to define in addition a feature test macro for

PROJECTS

@@ -0,0 +1,134 @@
+Open jobs for finishing GNU libc:
+---------------------------------
+Status: April 1997
+
+If you have time and talent to take over any of the jobs below please
+contact <bug-glibc@prep.ai.mit.edu>
+
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+[ 1] Port to new platforms or test current version on formerly supported
+     platforms.
+
+**** See http://www.gnu.org/software/libc/porting.html for more details.
+
+
+[ 2] Test compliance with standards.  If you have access to recent
+     standards (IEEE, ISO, ANSI, X/Open, ...) and/or test suites you
+     could do some checks as the goal is to be compliant with all
+     standards if they do not contradict each other.
+
+
+[ 3] The IMHO opinion most important task is to write a more complete
+     test suite.  We cannot get too many people working on this.  It is
+     not difficult to write a test, find a definition of the function
+     which I normally can provide, if necessary, and start writing tests
+     to test for compliance.  Beside this, take a look at the sources
+     and write tests which in total test as many paths of execution as
+     possible.
+
+
+[ 4] Write translations for the GNU libc message for the so far
+     unsupported languages.  GNU libc is fully internationalized and
+     users can immediately benefit from this.
+
+     Take a look at the matrix in
+	ftp://prep.ai.mit.edu/pub/gnu/ABOUT-NLS
+     for the current status (of course better use a mirror of prep).
+
+
+[ 5] Write wordexp() function; this is described in POSIX.2, the
+     header <wordexp.h> already exists.
+
+     Implementation idea: use some functions from bash.
+
+**** Somebody is working on this.  Help may or may not be appreciated.
+
+
+[ 6] Write `long double' versions of the math functions.  This should be
+     done in collaboration with the NetBSD and FreeBSD people.
+
+     The libm is in fact fdlibm (not the same as in Linux libc).
+
+**** Partly done.  But we need someone with numerical experiences for
+     the rest.
+
+
+[ 7] Several math functions have to be written:
+
+     - exp2
+
+     each with float, double, and long double arguments.
+
+     Beside this most of the complex math functions which are new in
+     ISO C 9X should be improved.  Writing some of them in assembler is
+     useful to exploit the parallelism which often is available.
+
+
+[ 8] If you enjoy assembler programming (as I do --drepper :-) you might
+     be interested in writing optimized versions for some functions.
+     Especially the string handling functions can be optimized a lot.
+
+     Take a look at
+
+	Faster String Functions
+	Henry Spencer, University of Toronto
+	Usenix Winter '92, pp. 419--428
+
+     or just ask.  Currently mostly i?86 and Alpha optimized versions
+     exist.  Please ask before working on this to avoid duplicate
+     work.
+
+
+[ 9] Write nftw() function.  Perhaps it might be good to reimplement the
+     ftw() function as well to share most of the code.
+
+**** Almost done!
+
+
+[10] Extend regex and/or rx to work with wide characters and complete
+     implementation of character class and collation class handling.
+
+     It is planed to do a complete rewrite.
+
+
+[11] Write access function for netmasks, bootparams, and automount
+     databases for nss_files and nss_db module.
+     The functions should be embedded in the nss scheme.  This is not
+     hard and not all services must be supported at once.
+
+
+[12] Rewrite utmp/wtmp functions to use database functions.  This is much
+     better than the normal flat file format.
+
+**** There are plans for a new approach to this problem.  Please contact
+     bug-glibc@prep.ai.mit.edu before starting to work.)
+
+
+[13] Several more or less small functions have to be written:
+
+     + tcgetid() and waitid()			from XPG4.2
+     + grantpt(), ptsname(), unlockpt()		from XPG4.2
+     + getdate()				from XPG4.2
+	*** Probably underway
+     + fmtmsg()					from SVID
+	*** Probably underway
+
+     More information are available on request.
+
+
+[14] We need to write a library for on-the-fly transformation of streams
+     of text.  In fact, this would be a recode-library (you know, GNU recode).
+     This is needed in several places in the GNU libc and I already have
+     rather concrete plans but so far no possibility to start this.
+
+
+[15] Cleaning up the header files.  Ideally, each header style should
+     follow the "good examples".  Each variable and function should have
+     a short description of the function and its parameters.  The prototypes
+     should always contain variable names which can help to identify their
+     meaning; better than
+
+		int foo __P ((int, int, int, int));
+
+     Blargh!

README

@@ -1,21 +1,29 @@
-This directory contains the version 1.09.6 test release of the GNU C Library.
+This directory contains the version 2.0.1 test release of the GNU C Library.
 Many bugs have been fixed since the last release.
 Some bugs surely remain.
 
-As of this release, the GNU C library has been ported to the following
+As of this release, the GNU C library is known to run on the following
 configurations:
 
+		*-*-gnu			GNU Hurd
+		i[3456]86-*-linux-gnu	Linux-2.0 on Intel
+		m68k-*-linux-gnu	Linux-2.0 on Motorola 680x0
+		alpha-*-linux-gnu	Linux-2.0 on DEC Alpha
+
+
+Former releases of this library (version 1.09.1 and perhaps earlier
+versions) used to run on the following configurations:
+
 		alpha-dec-osf1
-		i386-bsd4.3
-		i386-force_cpu386-none
-		i386-gnu (for Hurd development only)
-		i386-isc2.2
-		i386-isc3
-		i386-sco3.2
-		i386-sco3.2v4
-		i386-sequent-bsd
-		i386-sysv
-		i386-sysv4
+		i[3456]86-*-bsd4.3
+		i[3456]86-*-isc2.2
+		i[3456]86-*-isc3
+		i[3456]86-*-sco3.2
+		i[3456]86-*-sco3.2v4
+		i[3456]86-*-sysv
+		i[3456]86-*-sysv4
+		i[3456]86-force_cpu386-none
+		i[3456]86-sequent-bsd
 		i960-nindy960-none
 		m68k-hp-bsd4.3
 		m68k-mvme135-none
@@ -28,40 +36,53 @@ configurations:
 		sparc-sun-solaris2
 		sparc-sun-sunos4
 
-Porting the library is not hard.  If you are interested in doing a port,
-please get on the mailing list by sending electronic mail to
-bug-glibc-request@prep.ai.mit.edu.
+Whether this is still true for this release is unknown.  Porting the
+library is not hard.  If you are interested in doing a port, please
+get on the mailing list by sending electronic mail to
+<bug-glibc-request@prep.ai.mit.edu>.
 
 The GNU C library now includes Michael Glad's Ultra Fast Crypt, which
 provides the Unix `crypt' function, plus some other entry points.
 Because of the United States export restriction on DES implementations,
 we are distributing this code separately from the rest of the C
 library.  There is an extra distribution tar file just for crypt; it is
-called `glibc-1.09.6-crypt.tar.gz'.  You can just unpack the crypt
+called `glibc-crypt-2.0.1.tar.gz'.  You can just unpack the crypt
 distribution along with the rest of the C library and build; you can
 also build the library without getting crypt.  Users outside the USA
-can get the crypt distribution via anonymous FTP from ftp.uni-c.dk
-[129.142.6.74], or another archive site outside the USA.  Archive
+can get the crypt distribution via anonymous FTP from ftp.ifi.uio.no
+[129.240.64.21], or another archive site outside the USA.  Archive
 maintainers are encouraged to copy this distribution to their archives
-outside the USA.  Please get it from ftp.uni-c.dk; transferring this
+outside the USA.  Please get it from ftp.ifi.uio.no; transferring this
 distribution from prep.ai.mit.edu (or any other site in the USA) to a
 site outside the USA is in violation of US export laws.
 
+Beside the separate crypt tar file there are some more add-ons which can be
+used together with GNU libc.  They are designed in a way to ease the
+installation by integrating them in the libc source tree.  Simply get the
+add-ons you need and use the --enable-add-ons option of the `configure'
+script to tell where the add-ons are found.  Please read the FAQ file for
+more details.
+
 See the file INSTALL to find out how to configure, build, install, and port
-the GNU C library.
+the GNU C library.  You might also consider reading the WWW pages for the
+GNU libc at http://www.gnu.org/software/libc/libc.html.
 
 The GNU C Library is completely documented by the Texinfo manual found
 in the `manual/' subdirectory.  The manual is still being updated and
 contains some known errors and omissions; we regret that we do not have
 the resources to work on the manual as much as we would like.  Please
-send comments on the manual to bug-glibc-manual@prep.ai.mit.edu, and
+send comments on the manual to <bug-glibc-manual@prep.ai.mit.edu>, and
 not to the library bug-reporting address.
 
 The file NOTES contains a description of the feature-test macros used
 in the GNU C library, explaining how you can tell the library what
 facilities you want it to make available.
 
-Send bug reports to bug-glibc@prep.ai.mit.edu.
+We prefer to get bug reports sent using the `glibcbug' shell script which
+is install together with the rest of the GNU libc to <bugs@gnu.ai.mit.edu>.
+Simply run this shell script and fill in the information.  Nevertheless
+you can still send bug reports to <bug-glibc@prep.ai.mit.edu> as normal
+electronic mails.
 
 The GNU C Library is free software.  See the file COPYING.LIB for copying
 conditions.

README.libm

@@ -0,0 +1,856 @@
+The following functions for the `long double' versions of the libm
+function have to be written:
+
+e_acosl.c
+e_asinl.c
+e_atan2l.c
+e_expl.c
+e_fmodl.c
+e_hypotl.c
+e_j0l.c
+e_j1l.c
+e_jnl.c
+e_lgammal_r.c
+e_logl.c
+e_log10l.c
+e_powl.c
+e_rem_pio2l.c
+e_sinhl.c
+e_sqrtl.c
+
+k_cosl.c
+k_rem_pio2l.c
+k_sinl.c
+k_tanl.c
+
+s_atanl.c
+s_erfl.c
+s_expm1l.c
+s_log1pl.c
+
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+			       Methods
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+arcsin
+~~~~~~
+ *	Since  asin(x) = x + x^3/6 + x^5*3/40 + x^7*15/336 + ...
+ *	we approximate asin(x) on [0,0.5] by
+ *		asin(x) = x + x*x^2*R(x^2)
+ *	where
+ *		R(x^2) is a rational approximation of (asin(x)-x)/x^3
+ *	and its remez error is bounded by
+ *		|(asin(x)-x)/x^3 - R(x^2)| < 2^(-58.75)
+ *
+ *	For x in [0.5,1]
+ *		asin(x) = pi/2-2*asin(sqrt((1-x)/2))
+ *	Let y = (1-x), z = y/2, s := sqrt(z), and pio2_hi+pio2_lo=pi/2;
+ *	then for x>0.98
+ *		asin(x) = pi/2 - 2*(s+s*z*R(z))
+ *			= pio2_hi - (2*(s+s*z*R(z)) - pio2_lo)
+ *	For x<=0.98, let pio4_hi = pio2_hi/2, then
+ *		f = hi part of s;
+ *		c = sqrt(z) - f = (z-f*f)/(s+f) 	...f+c=sqrt(z)
+ *	and
+ *		asin(x) = pi/2 - 2*(s+s*z*R(z))
+ *			= pio4_hi+(pio4-2s)-(2s*z*R(z)-pio2_lo)
+ *			= pio4_hi+(pio4-2f)-(2s*z*R(z)-(pio2_lo+2c))
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+arccos
+~~~~~~
+ * Method :
+ *	acos(x)  = pi/2 - asin(x)
+ *	acos(-x) = pi/2 + asin(x)
+ * For |x|<=0.5
+ *	acos(x) = pi/2 - (x + x*x^2*R(x^2))	(see asin.c)
+ * For x>0.5
+ * 	acos(x) = pi/2 - (pi/2 - 2asin(sqrt((1-x)/2)))
+ *		= 2asin(sqrt((1-x)/2))
+ *		= 2s + 2s*z*R(z) 	...z=(1-x)/2, s=sqrt(z)
+ *		= 2f + (2c + 2s*z*R(z))
+ *     where f=hi part of s, and c = (z-f*f)/(s+f) is the correction term
+ *     for f so that f+c ~ sqrt(z).
+ * For x<-0.5
+ *	acos(x) = pi - 2asin(sqrt((1-|x|)/2))
+ *		= pi - 0.5*(s+s*z*R(z)), where z=(1-|x|)/2,s=sqrt(z)
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+atan2
+~~~~~
+ * Method :
+ *	1. Reduce y to positive by atan2(y,x)=-atan2(-y,x).
+ *	2. Reduce x to positive by (if x and y are unexceptional):
+ *		ARG (x+iy) = arctan(y/x)   	   ... if x > 0,
+ *		ARG (x+iy) = pi - arctan[y/(-x)]   ... if x < 0,
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+atan
+~~~~
+ * Method
+ *   1. Reduce x to positive by atan(x) = -atan(-x).
+ *   2. According to the integer k=4t+0.25 chopped, t=x, the argument
+ *      is further reduced to one of the following intervals and the
+ *      arctangent of t is evaluated by the corresponding formula:
+ *
+ *      [0,7/16]      atan(x) = t-t^3*(a1+t^2*(a2+...(a10+t^2*a11)...)
+ *      [7/16,11/16]  atan(x) = atan(1/2) + atan( (t-0.5)/(1+t/2) )
+ *      [11/16.19/16] atan(x) = atan( 1 ) + atan( (t-1)/(1+t) )
+ *      [19/16,39/16] atan(x) = atan(3/2) + atan( (t-1.5)/(1+1.5t) )
+ *      [39/16,INF]   atan(x) = atan(INF) + atan( -1/t )
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+exp
+~~~
+ * Method
+ *   1. Argument reduction:
+ *      Reduce x to an r so that |r| <= 0.5*ln2 ~ 0.34658.
+ *	Given x, find r and integer k such that
+ *
+ *               x = k*ln2 + r,  |r| <= 0.5*ln2.
+ *
+ *      Here r will be represented as r = hi-lo for better
+ *	accuracy.
+ *
+ *   2. Approximation of exp(r) by a special rational function on
+ *	the interval [0,0.34658]:
+ *	Write
+ *	    R(r**2) = r*(exp(r)+1)/(exp(r)-1) = 2 + r*r/6 - r**4/360 + ...
+ *      We use a special Reme algorithm on [0,0.34658] to generate
+ * 	a polynomial of degree 5 to approximate R. The maximum error
+ *	of this polynomial approximation is bounded by 2**-59. In
+ *	other words,
+ *	    R(z) ~ 2.0 + P1*z + P2*z**2 + P3*z**3 + P4*z**4 + P5*z**5
+ *  	(where z=r*r, and the values of P1 to P5 are listed below)
+ *	and
+ *	    |                  5          |     -59
+ *	    | 2.0+P1*z+...+P5*z   -  R(z) | <= 2
+ *	    |                             |
+ *	The computation of exp(r) thus becomes
+ *                             2*r
+ *		exp(r) = 1 + -------
+ *		              R - r
+ *                                 r*R1(r)
+ *		       = 1 + r + ----------- (for better accuracy)
+ *		                  2 - R1(r)
+ *	where
+ *			         2       4             10
+ *		R1(r) = r - (P1*r  + P2*r  + ... + P5*r   ).
+ *
+ *   3. Scale back to obtain exp(x):
+ *	From step 1, we have
+ *	   exp(x) = 2^k * exp(r)
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+hypot
+~~~~~
+ *	If (assume round-to-nearest) z=x*x+y*y
+ *	has error less than sqrt(2)/2 ulp, than
+ *	sqrt(z) has error less than 1 ulp (exercise).
+ *
+ *	So, compute sqrt(x*x+y*y) with some care as
+ *	follows to get the error below 1 ulp:
+ *
+ *	Assume x>y>0;
+ *	(if possible, set rounding to round-to-nearest)
+ *	1. if x > 2y  use
+ *		x1*x1+(y*y+(x2*(x+x1))) for x*x+y*y
+ *	where x1 = x with lower 32 bits cleared, x2 = x-x1; else
+ *	2. if x <= 2y use
+ *		t1*y1+((x-y)*(x-y)+(t1*y2+t2*y))
+ *	where t1 = 2x with lower 32 bits cleared, t2 = 2x-t1,
+ *	y1= y with lower 32 bits chopped, y2 = y-y1.
+ *
+ *	NOTE: scaling may be necessary if some argument is too
+ *	      large or too tiny
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+j0/y0
+~~~~~
+ * Method -- j0(x):
+ *	1. For tiny x, we use j0(x) = 1 - x^2/4 + x^4/64 - ...
+ *	2. Reduce x to |x| since j0(x)=j0(-x),  and
+ *	   for x in (0,2)
+ *		j0(x) = 1-z/4+ z^2*R0/S0,  where z = x*x;
+ *	   (precision:  |j0-1+z/4-z^2R0/S0 |<2**-63.67 )
+ *	   for x in (2,inf)
+ * 		j0(x) = sqrt(2/(pi*x))*(p0(x)*cos(x0)-q0(x)*sin(x0))
+ * 	   where x0 = x-pi/4. It is better to compute sin(x0),cos(x0)
+ *	   as follow:
+ *		cos(x0) = cos(x)cos(pi/4)+sin(x)sin(pi/4)
+ *			= 1/sqrt(2) * (cos(x) + sin(x))
+ *		sin(x0) = sin(x)cos(pi/4)-cos(x)sin(pi/4)
+ *			= 1/sqrt(2) * (sin(x) - cos(x))
+ * 	   (To avoid cancellation, use
+ *		sin(x) +- cos(x) = -cos(2x)/(sin(x) -+ cos(x))
+ * 	    to compute the worse one.)
+ *
+ * Method -- y0(x):
+ *	1. For x<2.
+ *	   Since
+ *		y0(x) = 2/pi*(j0(x)*(ln(x/2)+Euler) + x^2/4 - ...)
+ *	   therefore y0(x)-2/pi*j0(x)*ln(x) is an even function.
+ *	   We use the following function to approximate y0,
+ *		y0(x) = U(z)/V(z) + (2/pi)*(j0(x)*ln(x)), z= x^2
+ *	   where
+ *		U(z) = u00 + u01*z + ... + u06*z^6
+ *		V(z) = 1  + v01*z + ... + v04*z^4
+ *	   with absolute approximation error bounded by 2**-72.
+ *	   Note: For tiny x, U/V = u0 and j0(x)~1, hence
+ *		y0(tiny) = u0 + (2/pi)*ln(tiny), (choose tiny<2**-27)
+ *	2. For x>=2.
+ * 		y0(x) = sqrt(2/(pi*x))*(p0(x)*cos(x0)+q0(x)*sin(x0))
+ * 	   where x0 = x-pi/4. It is better to compute sin(x0),cos(x0)
+ *	   by the method mentioned above.
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+j1/y1
+~~~~~
+ * Method -- j1(x):
+ *	1. For tiny x, we use j1(x) = x/2 - x^3/16 + x^5/384 - ...
+ *	2. Reduce x to |x| since j1(x)=-j1(-x),  and
+ *	   for x in (0,2)
+ *		j1(x) = x/2 + x*z*R0/S0,  where z = x*x;
+ *	   (precision:  |j1/x - 1/2 - R0/S0 |<2**-61.51 )
+ *	   for x in (2,inf)
+ * 		j1(x) = sqrt(2/(pi*x))*(p1(x)*cos(x1)-q1(x)*sin(x1))
+ * 		y1(x) = sqrt(2/(pi*x))*(p1(x)*sin(x1)+q1(x)*cos(x1))
+ * 	   where x1 = x-3*pi/4. It is better to compute sin(x1),cos(x1)
+ *	   as follow:
+ *		cos(x1) =  cos(x)cos(3pi/4)+sin(x)sin(3pi/4)
+ *			=  1/sqrt(2) * (sin(x) - cos(x))
+ *		sin(x1) =  sin(x)cos(3pi/4)-cos(x)sin(3pi/4)
+ *			= -1/sqrt(2) * (sin(x) + cos(x))
+ * 	   (To avoid cancellation, use
+ *		sin(x) +- cos(x) = -cos(2x)/(sin(x) -+ cos(x))
+ * 	    to compute the worse one.)
+ *
+ * Method -- y1(x):
+ *	1. screen out x<=0 cases: y1(0)=-inf, y1(x<0)=NaN
+ *	2. For x<2.
+ *	   Since
+ *		y1(x) = 2/pi*(j1(x)*(ln(x/2)+Euler)-1/x-x/2+5/64*x^3-...)
+ *	   therefore y1(x)-2/pi*j1(x)*ln(x)-1/x is an odd function.
+ *	   We use the following function to approximate y1,
+ *		y1(x) = x*U(z)/V(z) + (2/pi)*(j1(x)*ln(x)-1/x), z= x^2
+ *	   where for x in [0,2] (abs err less than 2**-65.89)
+ *		U(z) = U0[0] + U0[1]*z + ... + U0[4]*z^4
+ *		V(z) = 1  + v0[0]*z + ... + v0[4]*z^5
+ *	   Note: For tiny x, 1/x dominate y1 and hence
+ *		y1(tiny) = -2/pi/tiny, (choose tiny<2**-54)
+ *	3. For x>=2.
+ * 		y1(x) = sqrt(2/(pi*x))*(p1(x)*sin(x1)+q1(x)*cos(x1))
+ * 	   where x1 = x-3*pi/4. It is better to compute sin(x1),cos(x1)
+ *	   by method mentioned above.
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+jn/yn
+~~~~~
+ * Note 2. About jn(n,x), yn(n,x)
+ *	For n=0, j0(x) is called,
+ *	for n=1, j1(x) is called,
+ *	for n<x, forward recursion us used starting
+ *	from values of j0(x) and j1(x).
+ *	for n>x, a continued fraction approximation to
+ *	j(n,x)/j(n-1,x) is evaluated and then backward
+ *	recursion is used starting from a supposed value
+ *	for j(n,x). The resulting value of j(0,x) is
+ *	compared with the actual value to correct the
+ *	supposed value of j(n,x).
+ *
+ *	yn(n,x) is similar in all respects, except
+ *	that forward recursion is used for all
+ *	values of n>1.
+
+jn:
+    /* (x >> n**2)
+     *	    Jn(x) = cos(x-(2n+1)*pi/4)*sqrt(2/x*pi)
+     *	    Yn(x) = sin(x-(2n+1)*pi/4)*sqrt(2/x*pi)
+     *	    Let s=sin(x), c=cos(x),
+     *		xn=x-(2n+1)*pi/4, sqt2 = sqrt(2),then
+     *
+     *		   n	sin(xn)*sqt2	cos(xn)*sqt2
+     *		----------------------------------
+     *		   0	 s-c		 c+s
+     *		   1	-s-c 		-c+s
+     *		   2	-s+c		-c-s
+     *		   3	 s+c		 c-s
+...
+    /* x is tiny, return the first Taylor expansion of J(n,x)
+     * J(n,x) = 1/n!*(x/2)^n  - ...
+...
+		/* use backward recurrence */
+		/* 			x      x^2      x^2
+		 *  J(n,x)/J(n-1,x) =  ----   ------   ------   .....
+		 *			2n  - 2(n+1) - 2(n+2)
+		 *
+		 * 			1      1        1
+		 *  (for large x)   =  ----  ------   ------   .....
+		 *			2n   2(n+1)   2(n+2)
+		 *			-- - ------ - ------ -
+		 *			 x     x         x
+		 *
+		 * Let w = 2n/x and h=2/x, then the above quotient
+		 * is equal to the continued fraction:
+		 *		    1
+		 *	= -----------------------
+		 *		       1
+		 *	   w - -----------------
+		 *			  1
+		 * 	        w+h - ---------
+		 *		       w+2h - ...
+		 *
+		 * To determine how many terms needed, let
+		 * Q(0) = w, Q(1) = w(w+h) - 1,
+		 * Q(k) = (w+k*h)*Q(k-1) - Q(k-2),
+		 * When Q(k) > 1e4	good for single
+		 * When Q(k) > 1e9	good for double
+		 * When Q(k) > 1e17	good for quadruple
+
+...
+		/*  estimate log((2/x)^n*n!) = n*log(2/x)+n*ln(n)
+		 *  Hence, if n*(log(2n/x)) > ...
+		 *  single 8.8722839355e+01
+		 *  double 7.09782712893383973096e+02
+		 *  long double 1.1356523406294143949491931077970765006170e+04
+		 *  then recurrent value may overflow and the result is
+		 *  likely underflow to zero
+
+yn:
+    /* (x >> n**2)
+     *	    Jn(x) = cos(x-(2n+1)*pi/4)*sqrt(2/x*pi)
+     *	    Yn(x) = sin(x-(2n+1)*pi/4)*sqrt(2/x*pi)
+     *	    Let s=sin(x), c=cos(x),
+     *		xn=x-(2n+1)*pi/4, sqt2 = sqrt(2),then
+     *
+     *		   n	sin(xn)*sqt2	cos(xn)*sqt2
+     *		----------------------------------
+     *		   0	 s-c		 c+s
+     *		   1	-s-c 		-c+s
+     *		   2	-s+c		-c-s
+     *		   3	 s+c		 c-s
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+lgamma
+~~~~~~
+ * Method:
+ *   1. Argument Reduction for 0 < x <= 8
+ * 	Since gamma(1+s)=s*gamma(s), for x in [0,8], we may
+ * 	reduce x to a number in [1.5,2.5] by
+ * 		lgamma(1+s) = log(s) + lgamma(s)
+ *	for example,
+ *		lgamma(7.3) = log(6.3) + lgamma(6.3)
+ *			    = log(6.3*5.3) + lgamma(5.3)
+ *			    = log(6.3*5.3*4.3*3.3*2.3) + lgamma(2.3)
+ *   2. Polynomial approximation of lgamma around its
+ *	minimun ymin=1.461632144968362245 to maintain monotonicity.
+ *	On [ymin-0.23, ymin+0.27] (i.e., [1.23164,1.73163]), use
+ *		Let z = x-ymin;
+ *		lgamma(x) = -1.214862905358496078218 + z^2*poly(z)
+ *	where
+ *		poly(z) is a 14 degree polynomial.
+ *   2. Rational approximation in the primary interval [2,3]
+ *	We use the following approximation:
+ *		s = x-2.0;
+ *		lgamma(x) = 0.5*s + s*P(s)/Q(s)
+ *	with accuracy
+ *		|P/Q - (lgamma(x)-0.5s)| < 2**-61.71
+ *	Our algorithms are based on the following observation
+ *
+ *                             zeta(2)-1    2    zeta(3)-1    3
+ * lgamma(2+s) = s*(1-Euler) + --------- * s  -  --------- * s  + ...
+ *                                 2                 3
+ *
+ *	where Euler = 0.5771... is the Euler constant, which is very
+ *	close to 0.5.
+ *
+ *   3. For x>=8, we have
+ *	lgamma(x)~(x-0.5)log(x)-x+0.5*log(2pi)+1/(12x)-1/(360x**3)+....
+ *	(better formula:
+ *	   lgamma(x)~(x-0.5)*(log(x)-1)-.5*(log(2pi)-1) + ...)
+ *	Let z = 1/x, then we approximation
+ *		f(z) = lgamma(x) - (x-0.5)(log(x)-1)
+ *	by
+ *	  			    3       5             11
+ *		w = w0 + w1*z + w2*z  + w3*z  + ... + w6*z
+ *	where
+ *		|w - f(z)| < 2**-58.74
+ *
+ *   4. For negative x, since (G is gamma function)
+ *		-x*G(-x)*G(x) = pi/sin(pi*x),
+ * 	we have
+ * 		G(x) = pi/(sin(pi*x)*(-x)*G(-x))
+ *	since G(-x) is positive, sign(G(x)) = sign(sin(pi*x)) for x<0
+ *	Hence, for x<0, signgam = sign(sin(pi*x)) and
+ *		lgamma(x) = log(|Gamma(x)|)
+ *			  = log(pi/(|x*sin(pi*x)|)) - lgamma(-x);
+ *	Note: one should avoid compute pi*(-x) directly in the
+ *	      computation of sin(pi*(-x)).
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+log
+~~~
+ * Method :
+ *   1. Argument Reduction: find k and f such that
+ *			x = 2^k * (1+f),
+ *	   where  sqrt(2)/2 < 1+f < sqrt(2) .
+ *
+ *   2. Approximation of log(1+f).
+ *	Let s = f/(2+f) ; based on log(1+f) = log(1+s) - log(1-s)
+ *		 = 2s + 2/3 s**3 + 2/5 s**5 + .....,
+ *	     	 = 2s + s*R
+ *      We use a special Reme algorithm on [0,0.1716] to generate
+ * 	a polynomial of degree 14 to approximate R The maximum error
+ *	of this polynomial approximation is bounded by 2**-58.45. In
+ *	other words,
+ *		        2      4      6      8      10      12      14
+ *	    R(z) ~ Lg1*s +Lg2*s +Lg3*s +Lg4*s +Lg5*s  +Lg6*s  +Lg7*s
+ *  	(the values of Lg1 to Lg7 are listed in the program)
+ *	and
+ *	    |      2          14          |     -58.45
+ *	    | Lg1*s +...+Lg7*s    -  R(z) | <= 2
+ *	    |                             |
+ *	Note that 2s = f - s*f = f - hfsq + s*hfsq, where hfsq = f*f/2.
+ *	In order to guarantee error in log below 1ulp, we compute log
+ *	by
+ *		log(1+f) = f - s*(f - R)	(if f is not too large)
+ *		log(1+f) = f - (hfsq - s*(hfsq+R)).	(better accuracy)
+ *
+ *	3. Finally,  log(x) = k*ln2 + log(1+f).
+ *			    = k*ln2_hi+(f-(hfsq-(s*(hfsq+R)+k*ln2_lo)))
+ *	   Here ln2 is split into two floating point number:
+ *			ln2_hi + ln2_lo,
+ *	   where n*ln2_hi is always exact for |n| < 2000.
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+log10
+~~~~~
+ * Method :
+ *	Let log10_2hi = leading 40 bits of log10(2) and
+ *	    log10_2lo = log10(2) - log10_2hi,
+ *	    ivln10   = 1/log(10) rounded.
+ *	Then
+ *		n = ilogb(x),
+ *		if(n<0)  n = n+1;
+ *		x = scalbn(x,-n);
+ *		log10(x) := n*log10_2hi + (n*log10_2lo + ivln10*log(x))
+ *
+ * Note 1:
+ *	To guarantee log10(10**n)=n, where 10**n is normal, the rounding
+ *	mode must set to Round-to-Nearest.
+ * Note 2:
+ *	[1/log(10)] rounded to 53 bits has error  .198   ulps;
+ *	log10 is monotonic at all binary break points.
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+pow
+~~~
+ * Method:  Let x =  2   * (1+f)
+ *	1. Compute and return log2(x) in two pieces:
+ *		log2(x) = w1 + w2,
+ *	   where w1 has 53-24 = 29 bit trailing zeros.
+ *	2. Perform y*log2(x) = n+y' by simulating muti-precision
+ *	   arithmetic, where |y'|<=0.5.
+ *	3. Return x**y = 2**n*exp(y'*log2)
+ *
+ * Special cases:
+ *	1.  (anything) ** 0  is 1
+ *	2.  (anything) ** 1  is itself
+ *	3.  (anything) ** NAN is NAN
+ *	4.  NAN ** (anything except 0) is NAN
+ *	5.  +-(|x| > 1) **  +INF is +INF
+ *	6.  +-(|x| > 1) **  -INF is +0
+ *	7.  +-(|x| < 1) **  +INF is +0
+ *	8.  +-(|x| < 1) **  -INF is +INF
+ *	9.  +-1         ** +-INF is NAN
+ *	10. +0 ** (+anything except 0, NAN)               is +0
+ *	11. -0 ** (+anything except 0, NAN, odd integer)  is +0
+ *	12. +0 ** (-anything except 0, NAN)               is +INF
+ *	13. -0 ** (-anything except 0, NAN, odd integer)  is +INF
+ *	14. -0 ** (odd integer) = -( +0 ** (odd integer) )
+ *	15. +INF ** (+anything except 0,NAN) is +INF
+ *	16. +INF ** (-anything except 0,NAN) is +0
+ *	17. -INF ** (anything)  = -0 ** (-anything)
+ *	18. (-anything) ** (integer) is (-1)**(integer)*(+anything**integer)
+ *	19. (-anything except 0 and inf) ** (non-integer) is NAN
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+rem_pio2	return the remainder of x rem pi/2 in y[0]+y[1]
+~~~~~~~~
+This is one of the basic functions which is written with highest accuracy
+in mind.
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+sinh
+~~~~
+ * Method :
+ * mathematically sinh(x) if defined to be (exp(x)-exp(-x))/2
+ *	1. Replace x by |x| (sinh(-x) = -sinh(x)).
+ *	2.
+ *		                                    E + E/(E+1)
+ *	    0        <= x <= 22     :  sinh(x) := --------------, E=expm1(x)
+ *			       			        2
+ *
+ *	    22       <= x <= lnovft :  sinh(x) := exp(x)/2
+ *	    lnovft   <= x <= ln2ovft:  sinh(x) := exp(x/2)/2 * exp(x/2)
+ *	    ln2ovft  <  x	    :  sinh(x) := x*shuge (overflow)
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+sqrt
+~~~~
+ * Method:
+ *   Bit by bit method using integer arithmetic. (Slow, but portable)
+ *   1. Normalization
+ *	Scale x to y in [1,4) with even powers of 2:
+ *	find an integer k such that  1 <= (y=x*2^(2k)) < 4, then
+ *		sqrt(x) = 2^k * sqrt(y)
+ *   2. Bit by bit computation
+ *	Let q  = sqrt(y) truncated to i bit after binary point (q = 1),
+ *	     i							 0
+ *                                     i+1         2
+ *	    s  = 2*q , and	y  =  2   * ( y - q  ).		(1)
+ *	     i      i            i                 i
+ *
+ *	To compute q    from q , one checks whether
+ *		    i+1       i
+ *
+ *			      -(i+1) 2
+ *			(q + 2      ) <= y.			(2)
+ *     			  i
+ *							      -(i+1)
+ *	If (2) is false, then q   = q ; otherwise q   = q  + 2      .
+ *		 	       i+1   i             i+1   i
+ *
+ *	With some algebric manipulation, it is not difficult to see
+ *	that (2) is equivalent to
+ *                             -(i+1)
+ *			s  +  2       <= y			(3)
+ *			 i                i
+ *
+ *	The advantage of (3) is that s  and y  can be computed by
+ *				      i      i
+ *	the following recurrence formula:
+ *	    if (3) is false
+ *
+ *	    s     =  s  ,	y    = y   ;			(4)
+ *	     i+1      i		 i+1    i
+ *
+ *	    otherwise,
+ *                         -i                     -(i+1)
+ *	    s	  =  s  + 2  ,  y    = y  -  s  - 2  		(5)
+ *           i+1      i          i+1    i     i
+ *
+ *	One may easily use induction to prove (4) and (5).
+ *	Note. Since the left hand side of (3) contain only i+2 bits,
+ *	      it does not necessary to do a full (53-bit) comparison
+ *	      in (3).
+ *   3. Final rounding
+ *	After generating the 53 bits result, we compute one more bit.
+ *	Together with the remainder, we can decide whether the
+ *	result is exact, bigger than 1/2ulp, or less than 1/2ulp
+ *	(it will never equal to 1/2ulp).
+ *	The rounding mode can be detected by checking whether
+ *	huge + tiny is equal to huge, and whether huge - tiny is
+ *	equal to huge for some floating point number "huge" and "tiny".
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+cos
+~~~
+ * kernel cos function on [-pi/4, pi/4], pi/4 ~ 0.785398164
+ * Input x is assumed to be bounded by ~pi/4 in magnitude.
+ * Input y is the tail of x.
+ *
+ * Algorithm
+ *	1. Since cos(-x) = cos(x), we need only to consider positive x.
+ *	2. if x < 2^-27 (hx<0x3e400000 0), return 1 with inexact if x!=0.
+ *	3. cos(x) is approximated by a polynomial of degree 14 on
+ *	   [0,pi/4]
+ *		  	                 4            14
+ *	   	cos(x) ~ 1 - x*x/2 + C1*x + ... + C6*x
+ *	   where the remez error is
+ *
+ * 	|              2     4     6     8     10    12     14 |     -58
+ * 	|cos(x)-(1-.5*x +C1*x +C2*x +C3*x +C4*x +C5*x  +C6*x  )| <= 2
+ * 	|    					               |
+ *
+ * 	               4     6     8     10    12     14
+ *	4. let r = C1*x +C2*x +C3*x +C4*x +C5*x  +C6*x  , then
+ *	       cos(x) = 1 - x*x/2 + r
+ *	   since cos(x+y) ~ cos(x) - sin(x)*y
+ *			  ~ cos(x) - x*y,
+ *	   a correction term is necessary in cos(x) and hence
+ *		cos(x+y) = 1 - (x*x/2 - (r - x*y))
+ *	   For better accuracy when x > 0.3, let qx = |x|/4 with
+ *	   the last 32 bits mask off, and if x > 0.78125, let qx = 0.28125.
+ *	   Then
+ *		cos(x+y) = (1-qx) - ((x*x/2-qx) - (r-x*y)).
+ *	   Note that 1-qx and (x*x/2-qx) is EXACT here, and the
+ *	   magnitude of the latter is at least a quarter of x*x/2,
+ *	   thus, reducing the rounding error in the subtraction.
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+sin
+~~~
+ * kernel sin function on [-pi/4, pi/4], pi/4 ~ 0.7854
+ * Input x is assumed to be bounded by ~pi/4 in magnitude.
+ * Input y is the tail of x.
+ * Input iy indicates whether y is 0. (if iy=0, y assume to be 0).
+ *
+ * Algorithm
+ *	1. Since sin(-x) = -sin(x), we need only to consider positive x.
+ *	2. if x < 2^-27 (hx<0x3e400000 0), return x with inexact if x!=0.
+ *	3. sin(x) is approximated by a polynomial of degree 13 on
+ *	   [0,pi/4]
+ *		  	         3            13
+ *	   	sin(x) ~ x + S1*x + ... + S6*x
+ *	   where
+ *
+ * 	|sin(x)         2     4     6     8     10     12  |     -58
+ * 	|----- - (1+S1*x +S2*x +S3*x +S4*x +S5*x  +S6*x   )| <= 2
+ * 	|  x 					           |
+ *
+ *	4. sin(x+y) = sin(x) + sin'(x')*y
+ *		    ~ sin(x) + (1-x*x/2)*y
+ *	   For better accuracy, let
+ *		     3      2      2      2      2
+ *		r = x *(S2+x *(S3+x *(S4+x *(S5+x *S6))))
+ *	   then                   3    2
+ *		sin(x) = x + (S1*x + (x *(r-y/2)+y))
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+tan
+~~~
+ * kernel tan function on [-pi/4, pi/4], pi/4 ~ 0.7854
+ * Input x is assumed to be bounded by ~pi/4 in magnitude.
+ * Input y is the tail of x.
+ * Input k indicates whether tan (if k=1) or
+ * -1/tan (if k= -1) is returned.
+ *
+ * Algorithm
+ *	1. Since tan(-x) = -tan(x), we need only to consider positive x.
+ *	2. if x < 2^-28 (hx<0x3e300000 0), return x with inexact if x!=0.
+ *	3. tan(x) is approximated by a odd polynomial of degree 27 on
+ *	   [0,0.67434]
+ *		  	         3             27
+ *	   	tan(x) ~ x + T1*x + ... + T13*x
+ *	   where
+ *
+ * 	        |tan(x)         2     4            26   |     -59.2
+ * 	        |----- - (1+T1*x +T2*x +.... +T13*x    )| <= 2
+ * 	        |  x 					|
+ *
+ *	   Note: tan(x+y) = tan(x) + tan'(x)*y
+ *		          ~ tan(x) + (1+x*x)*y
+ *	   Therefore, for better accuracy in computing tan(x+y), let
+ *		     3      2      2       2       2
+ *		r = x *(T2+x *(T3+x *(...+x *(T12+x *T13))))
+ *	   then
+ *		 		    3    2
+ *		tan(x+y) = x + (T1*x + (x *(r+y)+y))
+ *
+ *      4. For x in [0.67434,pi/4],  let y = pi/4 - x, then
+ *		tan(x) = tan(pi/4-y) = (1-tan(y))/(1+tan(y))
+ *		       = 1 - 2*(tan(y) - (tan(y)^2)/(1+tan(y)))
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+atan
+~~~~
+ * Method
+ *   1. Reduce x to positive by atan(x) = -atan(-x).
+ *   2. According to the integer k=4t+0.25 chopped, t=x, the argument
+ *      is further reduced to one of the following intervals and the
+ *      arctangent of t is evaluated by the corresponding formula:
+ *
+ *      [0,7/16]      atan(x) = t-t^3*(a1+t^2*(a2+...(a10+t^2*a11)...)
+ *      [7/16,11/16]  atan(x) = atan(1/2) + atan( (t-0.5)/(1+t/2) )
+ *      [11/16.19/16] atan(x) = atan( 1 ) + atan( (t-1)/(1+t) )
+ *      [19/16,39/16] atan(x) = atan(3/2) + atan( (t-1.5)/(1+1.5t) )
+ *      [39/16,INF]   atan(x) = atan(INF) + atan( -1/t )
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+erf
+~~~
+ *			     x
+ *		      2      |\
+ *     erf(x)  =  ---------  | exp(-t*t)dt
+ *	 	   sqrt(pi) \|
+ *			     0
+ *
+ *     erfc(x) =  1-erf(x)
+ *  Note that
+ *		erf(-x) = -erf(x)
+ *		erfc(-x) = 2 - erfc(x)
+ *
+ * Method:
+ *	1. For |x| in [0, 0.84375]
+ *	    erf(x)  = x + x*R(x^2)
+ *          erfc(x) = 1 - erf(x)           if x in [-.84375,0.25]
+ *                  = 0.5 + ((0.5-x)-x*R)  if x in [0.25,0.84375]
+ *	   where R = P/Q where P is an odd poly of degree 8 and
+ *	   Q is an odd poly of degree 10.
+ *						 -57.90
+ *			| R - (erf(x)-x)/x | <= 2
+ *
+ *
+ *	   Remark. The formula is derived by noting
+ *          erf(x) = (2/sqrt(pi))*(x - x^3/3 + x^5/10 - x^7/42 + ....)
+ *	   and that
+ *          2/sqrt(pi) = 1.128379167095512573896158903121545171688
+ *	   is close to one. The interval is chosen because the fix
+ *	   point of erf(x) is near 0.6174 (i.e., erf(x)=x when x is
+ *	   near 0.6174), and by some experiment, 0.84375 is chosen to
+ * 	   guarantee the error is less than one ulp for erf.
+ *
+ *      2. For |x| in [0.84375,1.25], let s = |x| - 1, and
+ *         c = 0.84506291151 rounded to single (24 bits)
+ *         	erf(x)  = sign(x) * (c  + P1(s)/Q1(s))
+ *         	erfc(x) = (1-c)  - P1(s)/Q1(s) if x > 0
+ *			  1+(c+P1(s)/Q1(s))    if x < 0
+ *         	|P1/Q1 - (erf(|x|)-c)| <= 2**-59.06
+ *	   Remark: here we use the taylor series expansion at x=1.
+ *		erf(1+s) = erf(1) + s*Poly(s)
+ *			 = 0.845.. + P1(s)/Q1(s)
+ *	   That is, we use rational approximation to approximate
+ *			erf(1+s) - (c = (single)0.84506291151)
+ *	   Note that |P1/Q1|< 0.078 for x in [0.84375,1.25]
+ *	   where
+ *		P1(s) = degree 6 poly in s
+ *		Q1(s) = degree 6 poly in s
+ *
+ *      3. For x in [1.25,1/0.35(~2.857143)],
+ *         	erfc(x) = (1/x)*exp(-x*x-0.5625+R1/S1)
+ *         	erf(x)  = 1 - erfc(x)
+ *	   where
+ *		R1(z) = degree 7 poly in z, (z=1/x^2)
+ *		S1(z) = degree 8 poly in z
+ *
+ *      4. For x in [1/0.35,28]
+ *         	erfc(x) = (1/x)*exp(-x*x-0.5625+R2/S2) if x > 0
+ *			= 2.0 - (1/x)*exp(-x*x-0.5625+R2/S2) if -6<x<0
+ *			= 2.0 - tiny		(if x <= -6)
+ *         	erf(x)  = sign(x)*(1.0 - erfc(x)) if x < 6, else
+ *         	erf(x)  = sign(x)*(1.0 - tiny)
+ *	   where
+ *		R2(z) = degree 6 poly in z, (z=1/x^2)
+ *		S2(z) = degree 7 poly in z
+ *
+ *      Note1:
+ *	   To compute exp(-x*x-0.5625+R/S), let s be a single
+ *	   precision number and s := x; then
+ *		-x*x = -s*s + (s-x)*(s+x)
+ *	        exp(-x*x-0.5626+R/S) =
+ *			exp(-s*s-0.5625)*exp((s-x)*(s+x)+R/S);
+ *      Note2:
+ *	   Here 4 and 5 make use of the asymptotic series
+ *			  exp(-x*x)
+ *		erfc(x) ~ ---------- * ( 1 + Poly(1/x^2) )
+ *			  x*sqrt(pi)
+ *	   We use rational approximation to approximate
+ *      	g(s)=f(1/x^2) = log(erfc(x)*x) - x*x + 0.5625
+ *	   Here is the error bound for R1/S1 and R2/S2
+ *      	|R1/S1 - f(x)|  < 2**(-62.57)
+ *      	|R2/S2 - f(x)|  < 2**(-61.52)
+ *
+ *      5. For inf > x >= 28
+ *         	erf(x)  = sign(x) *(1 - tiny)  (raise inexact)
+ *         	erfc(x) = tiny*tiny (raise underflow) if x > 0
+ *			= 2 - tiny if x<0
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+expm1	Returns exp(x)-1, the exponential of x minus 1
+~~~~~
+ * Method
+ *   1. Argument reduction:
+ *	Given x, find r and integer k such that
+ *
+ *               x = k*ln2 + r,  |r| <= 0.5*ln2 ~ 0.34658
+ *
+ *      Here a correction term c will be computed to compensate
+ *	the error in r when rounded to a floating-point number.
+ *
+ *   2. Approximating expm1(r) by a special rational function on
+ *	the interval [0,0.34658]:
+ *	Since
+ *	    r*(exp(r)+1)/(exp(r)-1) = 2+ r^2/6 - r^4/360 + ...
+ *	we define R1(r*r) by
+ *	    r*(exp(r)+1)/(exp(r)-1) = 2+ r^2/6 * R1(r*r)
+ *	That is,
+ *	    R1(r**2) = 6/r *((exp(r)+1)/(exp(r)-1) - 2/r)
+ *		     = 6/r * ( 1 + 2.0*(1/(exp(r)-1) - 1/r))
+ *		     = 1 - r^2/60 + r^4/2520 - r^6/100800 + ...
+ *      We use a special Reme algorithm on [0,0.347] to generate
+ * 	a polynomial of degree 5 in r*r to approximate R1. The
+ *	maximum error of this polynomial approximation is bounded
+ *	by 2**-61. In other words,
+ *	    R1(z) ~ 1.0 + Q1*z + Q2*z**2 + Q3*z**3 + Q4*z**4 + Q5*z**5
+ *	where 	Q1  =  -1.6666666666666567384E-2,
+ * 		Q2  =   3.9682539681370365873E-4,
+ * 		Q3  =  -9.9206344733435987357E-6,
+ * 		Q4  =   2.5051361420808517002E-7,
+ * 		Q5  =  -6.2843505682382617102E-9;
+ *  	(where z=r*r, and the values of Q1 to Q5 are listed below)
+ *	with error bounded by
+ *	    |                  5           |     -61
+ *	    | 1.0+Q1*z+...+Q5*z   -  R1(z) | <= 2
+ *	    |                              |
+ *
+ *	expm1(r) = exp(r)-1 is then computed by the following
+ * 	specific way which minimize the accumulation rounding error:
+ *			       2     3
+ *			      r     r    [ 3 - (R1 + R1*r/2)  ]
+ *	      expm1(r) = r + --- + --- * [--------------------]
+ *		              2     2    [ 6 - r*(3 - R1*r/2) ]
+ *
+ *	To compensate the error in the argument reduction, we use
+ *		expm1(r+c) = expm1(r) + c + expm1(r)*c
+ *			   ~ expm1(r) + c + r*c
+ *	Thus c+r*c will be added in as the correction terms for
+ *	expm1(r+c). Now rearrange the term to avoid optimization
+ * 	screw up:
+ *		        (      2                                    2 )
+ *		        ({  ( r    [ R1 -  (3 - R1*r/2) ]  )  }    r  )
+ *	 expm1(r+c)~r - ({r*(--- * [--------------------]-c)-c} - --- )
+ *	                ({  ( 2    [ 6 - r*(3 - R1*r/2) ]  )  }    2  )
+ *                      (                                             )
+ *
+ *		   = r - E
+ *   3. Scale back to obtain expm1(x):
+ *	From step 1, we have
+ *	   expm1(x) = either 2^k*[expm1(r)+1] - 1
+ *		    = or     2^k*[expm1(r) + (1-2^-k)]
+ *   4. Implementation notes:
+ *	(A). To save one multiplication, we scale the coefficient Qi
+ *	     to Qi*2^i, and replace z by (x^2)/2.
+ *	(B). To achieve maximum accuracy, we compute expm1(x) by
+ *	  (i)   if x < -56*ln2, return -1.0, (raise inexact if x!=inf)
+ *	  (ii)  if k=0, return r-E
+ *	  (iii) if k=-1, return 0.5*(r-E)-0.5
+ *        (iv)	if k=1 if r < -0.25, return 2*((r+0.5)- E)
+ *	       	       else	     return  1.0+2.0*(r-E);
+ *	  (v)   if (k<-2||k>56) return 2^k(1-(E-r)) - 1 (or exp(x)-1)
+ *	  (vi)  if k <= 20, return 2^k((1-2^-k)-(E-r)), else
+ *	  (vii) return 2^k(1-((E+2^-k)-r))
+ *
+ * Special cases:
+ *	expm1(INF) is INF, expm1(NaN) is NaN;
+ *	expm1(-INF) is -1, and
+ *	for finite argument, only expm1(0)=0 is exact.
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+log1p
+~~~~~
+ * Method :
+ *   1. Argument Reduction: find k and f such that
+ *			1+x = 2^k * (1+f),
+ *	   where  sqrt(2)/2 < 1+f < sqrt(2) .
+ *
+ *      Note. If k=0, then f=x is exact. However, if k!=0, then f
+ *	may not be representable exactly. In that case, a correction
+ *	term is need. Let u=1+x rounded. Let c = (1+x)-u, then
+ *	log(1+x) - log(u) ~ c/u. Thus, we proceed to compute log(u),
+ *	and add back the correction term c/u.
+ *	(Note: when x > 2**53, one can simply return log(x))
+ *
+ *   2. Approximation of log1p(f).
+ *	Let s = f/(2+f) ; based on log(1+f) = log(1+s) - log(1-s)
+ *		 = 2s + 2/3 s**3 + 2/5 s**5 + .....,
+ *	     	 = 2s + s*R
+ *      We use a special Reme algorithm on [0,0.1716] to generate
+ * 	a polynomial of degree 14 to approximate R The maximum error
+ *	of this polynomial approximation is bounded by 2**-58.45. In
+ *	other words,
+ *		        2      4      6      8      10      12      14
+ *	    R(z) ~ Lp1*s +Lp2*s +Lp3*s +Lp4*s +Lp5*s  +Lp6*s  +Lp7*s
+ *  	(the values of Lp1 to Lp7 are listed in the program)
+ *	and
+ *	    |      2          14          |     -58.45
+ *	    | Lp1*s +...+Lp7*s    -  R(z) | <= 2
+ *	    |                             |
+ *	Note that 2s = f - s*f = f - hfsq + s*hfsq, where hfsq = f*f/2.
+ *	In order to guarantee error in log below 1ulp, we compute log
+ *	by
+ *		log1p(f) = f - (hfsq - s*(hfsq+R)).
+ *
+ *	3. Finally, log1p(x) = k*ln2 + log1p(f).
+ *		 	     = k*ln2_hi+(f-(hfsq-(s*(hfsq+R)+k*ln2_lo)))
+ *	   Here ln2 is split into two floating point number:
+ *			ln2_hi + ln2_lo,
+ *	   where n*ln2_hi is always exact for |n| < 2000.
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

README.template

@@ -2,20 +2,28 @@ This directory contains the version VERSION test release of the GNU C Library.
 Many bugs have been fixed since the last release.
 Some bugs surely remain.
 
-As of this release, the GNU C library has been ported to the following
+As of this release, the GNU C library is known to run on the following
 configurations:
 
+		*-*-gnu			GNU Hurd
+		i[3456]86-*-linux-gnu	Linux-2.0 on Intel
+		m68k-*-linux-gnu	Linux-2.0 on Motorola 680x0
+		alpha-*-linux-gnu	Linux-2.0 on DEC Alpha
+
+
+Former releases of this library (version 1.09.1 and perhaps earlier
+versions) used to run on the following configurations:
+
 		alpha-dec-osf1
-		i386-bsd4.3
-		i386-force_cpu386-none
-		i386-gnu (for Hurd development only)
-		i386-isc2.2
-		i386-isc3
-		i386-sco3.2
-		i386-sco3.2v4
-		i386-sequent-bsd
-		i386-sysv
-		i386-sysv4
+		i[3456]86-*-bsd4.3
+		i[3456]86-*-isc2.2
+		i[3456]86-*-isc3
+		i[3456]86-*-sco3.2
+		i[3456]86-*-sco3.2v4
+		i[3456]86-*-sysv
+		i[3456]86-*-sysv4
+		i[3456]86-force_cpu386-none
+		i[3456]86-sequent-bsd
 		i960-nindy960-none
 		m68k-hp-bsd4.3
 		m68k-mvme135-none
@@ -28,40 +36,53 @@ configurations:
 		sparc-sun-solaris2
 		sparc-sun-sunos4
 
-Porting the library is not hard.  If you are interested in doing a port,
-please get on the mailing list by sending electronic mail to
-bug-glibc-request@prep.ai.mit.edu.
+Whether this is still true for this release is unknown.  Porting the
+library is not hard.  If you are interested in doing a port, please
+get on the mailing list by sending electronic mail to
+<bug-glibc-request@prep.ai.mit.edu>.
 
 The GNU C library now includes Michael Glad's Ultra Fast Crypt, which
 provides the Unix `crypt' function, plus some other entry points.
 Because of the United States export restriction on DES implementations,
 we are distributing this code separately from the rest of the C
 library.  There is an extra distribution tar file just for crypt; it is
-called `glibc-VERSION-crypt.tar.gz'.  You can just unpack the crypt
+called `glibc-crypt-VERSION.tar.gz'.  You can just unpack the crypt
 distribution along with the rest of the C library and build; you can
 also build the library without getting crypt.  Users outside the USA
-can get the crypt distribution via anonymous FTP from ftp.uni-c.dk
-[129.142.6.74], or another archive site outside the USA.  Archive
+can get the crypt distribution via anonymous FTP from ftp.ifi.uio.no
+[129.240.64.21], or another archive site outside the USA.  Archive
 maintainers are encouraged to copy this distribution to their archives
-outside the USA.  Please get it from ftp.uni-c.dk; transferring this
+outside the USA.  Please get it from ftp.ifi.uio.no; transferring this
 distribution from prep.ai.mit.edu (or any other site in the USA) to a
 site outside the USA is in violation of US export laws.
 
+Beside the separate crypt tar file there are some more add-ons which can be
+used together with GNU libc.  They are designed in a way to ease the
+installation by integrating them in the libc source tree.  Simply get the
+add-ons you need and use the --enable-add-ons option of the `configure'
+script to tell where the add-ons are found.  Please read the FAQ file for
+more details.
+
 See the file INSTALL to find out how to configure, build, install, and port
-the GNU C library.
+the GNU C library.  You might also consider reading the WWW pages for the
+GNU libc at http://www.gnu.org/software/libc/libc.html.
 
 The GNU C Library is completely documented by the Texinfo manual found
 in the `manual/' subdirectory.  The manual is still being updated and
 contains some known errors and omissions; we regret that we do not have
 the resources to work on the manual as much as we would like.  Please
-send comments on the manual to bug-glibc-manual@prep.ai.mit.edu, and
+send comments on the manual to <bug-glibc-manual@prep.ai.mit.edu>, and
 not to the library bug-reporting address.
 
 The file NOTES contains a description of the feature-test macros used
 in the GNU C library, explaining how you can tell the library what
 facilities you want it to make available.
 
-Send bug reports to bug-glibc@prep.ai.mit.edu.
+We prefer to get bug reports sent using the `glibcbug' shell script which
+is install together with the rest of the GNU libc to <bugs@gnu.ai.mit.edu>.
+Simply run this shell script and fill in the information.  Nevertheless
+you can still send bug reports to <bug-glibc@prep.ai.mit.edu> as normal
+electronic mails.
 
 The GNU C Library is free software.  See the file COPYING.LIB for copying
 conditions.

Rules

@@ -1,4 +1,4 @@
-# Copyright (C) 1991, 1992, 1993, 1994, 1995 Free Software Foundation, Inc.
+# Copyright (C) 1991, 92, 93, 94, 95, 96 Free Software Foundation, Inc.
 # This file is part of the GNU C Library.
 
 # The GNU C Library is free software; you can redistribute it and/or
@@ -38,6 +38,10 @@ export subdir := $(subdir)
 .PHONY: all
 all: objs lib others
 
+others: $(addprefix $(objpfx),$(extra-objs) \
+			      $(install-lib) $(install-bin) \
+			      $(install-rootsbin) $(install-sbin))
+
 ifneq	"$(findstring env,$(origin headers))" ""
 headers :=
 endif
@@ -46,6 +50,10 @@ ifneq	"$(findstring env,$(origin generated))" ""
 generated :=
 endif
 
+ifneq	"$(findstring env,$(origin common-generated))" ""
+common-generated :=
+endif
+
 ifeq "$(strip $(headers))" ""
 ifneq "$(wildcard $(subdir).h)" ""
 override headers := $(subdir).h
@@ -59,43 +67,45 @@ subdir_lib: lib-noranlib
 
 # Some subdirs need to install a dummy library.
 # They can use "$(objpfx)libfnord.a: $(dep-dummy-lib); $(make-dummy-lib)".
-dep-dummy-lib = $(objpfx)dummy.o
+dep-dummy-lib = $(common-objpfx)dummy.o
 define make-dummy-lib
 $(AR) cr$(verbose) $@ $<
 endef
-$(objpfx)dummy.o:
-	@rm -f $(@:.o=.c)
-	echo 'void __dummy__ () { }' > $(@:.o=.c)
-	$(CC) -c $(@:.o=.c) -o $@
-generated := $(generated) dummy.o dummy.c
+$(common-objpfx)dummy.c:
+	rm -f $@
+	echo 'void __dummy__ (void) { }' > $@
+$(common-objpfx)empty.c:
+	cp -f /dev/null $@
+common-generated := $(common-generated) dummy.o dummy.c empty.c empty.o
 
-# This makes all the auxilliary and test programs.
+# This makes all the auxiliary and test programs.
 
 .PHONY: others tests
 others: $(addprefix $(objpfx),$(others) $(extra-objs))
 ifeq ($(cross-compiling),yes)
-tests: $(addprefix $(objpfx),$(tests))
+tests: $(addprefix $(objpfx),$(tests) $(test-srcs))
 else
 tests: $(tests:%=$(objpfx)%.out)
 endif
 
-ifneq "$(strip $(others) $(tests))" ""
-$(addprefix $(objpfx),$(others) $(tests)): %: %.o \
-  $(sort $(filter $(common-objpfx)libc%,$(link-libc)))
+ifneq "$(strip $(others) $(tests) $(test-srcs))" ""
+$(addprefix $(objpfx),$(others) $(tests) $(test-srcs)): %: %.o \
+  $(sort $(filter $(common-objpfx)libc%,$(link-libc))) \
+  $(addprefix $(csu-objpfx),start.o) $(+preinit) $(+postinit)
 	$(+link)
 endif
 
-ifneq "$(strip $(tests))" ""
+ifneq "$(strip $(tests) $(test-srcs))" ""
 # These are the implicit rules for making test outputs
 # from the test programs and whatever input files are present.
 $(objpfx)%.out: %.args $(objpfx)% %.input
-	$(built-program-cmd) `cat $(word 1,$^)` < $(word 3,$^) > $@
+	$($*-ENV) $(built-program-cmd) `cat $(word 1,$^)` < $(word 3,$^) > $@
 $(objpfx)%.out: %.args $(objpfx)%
-	$(built-program-cmd) `cat $(word 1,$^)` > $@
+	$($*-ENV) $(built-program-cmd) `cat $(word 1,$^)` > $@
 $(objpfx)%.out: %.input $(objpfx)%
-	$(built-program-cmd) < $(word 1,$^) > $@
+	$($*-ENV) $(built-program-cmd) < $(word 1,$^) > $@
 $(objpfx)%.out: /dev/null $(objpfx)%	# Make it 2nd arg for canned sequence.
-	$(built-program-cmd) > $@
+	$($*-ENV) $(built-program-cmd) > $@
 endif	# tests
 
 .PHONY: distclean realclean subdir_distclean subdir_realclean \
@@ -113,7 +123,7 @@ subdir_echo-headers: echo-headers
 .PHONY: subdir_echo-distinfo
 subdir_echo-distinfo:
 	@echo $(addprefix +header+,$(headers)) \
-	      $(addprefix +nodist+,$(generated) $(dont_distribute))
+	      $(addprefix +nodist+,$(generated) $(common-generated) $(dont_distribute))
 
 # We want to install everything except the library itself, but update all
 # our portions of the library because the parent make will install it later
@@ -127,4 +137,18 @@ subdir_dist: dist
 
 # Convenient target to update all the generated source files.
 .PHONY: generated
-generated: $(addprefix $(objpfx),$(generated))
+generated: $(addprefix $(common-objpfx),$(common-generated)) \
+	$(addprefix $(objpfx),$(generated))
+
+ifndef libc.so-version
+# Undefine this because it can't work when we libc.so is unversioned.
+static-only-routines =
+endif
+
+ifdef static-only-routines
+# These routines are to be omitted from the shared library object,
+# so we replace the PIC objects for them with the empty object file.
+$(static-only-routines:%=$(objpfx)%.so): %.so: $(common-objpfx)empty.o
+	rm -f $@
+	ln $< $@
+endif

a.out.h

@@ -1 +0,0 @@
-#include <misc/a.out.h>

aclocal.m4

@@ -3,7 +3,8 @@ dnl which appears in configure.in before the sysdep configure scripts are run.
 dnl Each sysdep configure.in does GLIBC_PROVIDES first, to avoid any
 dnl AC_REQUIREs or AC_BEFOREs duplicating their code.
 dnl
-define(AC_FD_MSG,4)dnl Autoconf lossage.
+define(AC_FD_MSG,6)dnl Autoconf lossage.
+define(AC_FD_CC,5)dnl Autoconf lossage.
 AC_DEFUN([GLIBC_PROVIDES], [dnl
 AC_PROVIDE([AC_PROG_INSTALL])dnl
 AC_PROVIDE([AC_PROG_RANLIB])dnl
@@ -17,7 +18,7 @@ dnl
 AC_DEFUN(AC_CHECK_SYMBOL, [dnl
 AC_MSG_CHECKING(for $1)
 AC_CACHE_VAL(ac_cv_check_symbol_$1, [dnl
-AC_TRY_LINK(, 
+AC_TRY_LINK(,
 changequote(,)dnl
 extern char *$1[]; puts(*$1);,
 changequote([,])dnl

aliases.h

@@ -0,0 +1 @@
+#include <inet/aliases.h>

argp.h

@@ -0,0 +1 @@
+#include <argp/argp.h>

argp/Makefile

@@ -0,0 +1,31 @@
+# Copyright (C) 1997 Free Software Foundation, Inc.
+# This file is part of the GNU C Library.
+
+# The GNU C Library is free software; you can redistribute it and/or
+# modify it under the terms of the GNU Library General Public License as
+# published by the Free Software Foundation; either version 2 of the
+# License, or (at your option) any later version.
+
+# The GNU C Library is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+# Library General Public License for more details.
+
+# You should have received a copy of the GNU Library General Public
+# License along with the GNU C Library; see the file COPYING.LIB.  If
+# not, write to the Free Software Foundation, Inc.,
+# 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+
+#
+#	Makefile for argp.
+#
+subdir	:= argp
+
+headers		= argp.h
+distribute	= argp-fmtstream.h argp-namefrob.h
+routines	= $(addprefix argp-, ba fmtstream fs-xinl help parse pv \
+				     pvh xinl eexst)
+
+tests		= argp-test
+
+include ../Rules

argp/argp-ba.c

@@ -0,0 +1,26 @@
+/* Default definition for ARGP_PROGRAM_BUG_ADDRESS.
+   Copyright (C) 1996, 1997 Free Software Foundation, Inc.
+   This file is part of the GNU C Library.
+   Written by Miles Bader <miles@gnu.ai.mit.edu>.
+
+   The GNU C Library is free software; you can redistribute it and/or
+   modify it under the terms of the GNU Library General Public License as
+   published by the Free Software Foundation; either version 2 of the
+   License, or (at your option) any later version.
+
+   The GNU C Library is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+   Library General Public License for more details.
+
+   You should have received a copy of the GNU Library General Public
+   License along with the GNU C Library; see the file COPYING.LIB.  If not,
+   write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+   Boston, MA 02111-1307, USA.  */
+
+/* If set by the user program, it should point to string that is the
+   bug-reporting address for the program.  It will be printed by argp_help if
+   the ARGP_HELP_BUG_ADDR flag is set (as it is by various standard help
+   messages), embedded in a sentence that says something like `Report bugs to
+   ADDR.'.  */
+const char *argp_program_bug_address = 0;

argp/argp-eexst.c

@@ -0,0 +1,29 @@
+/* Default definition for ARGP_ERR_EXIT_STATUS
+   Copyright (C) 1997 Free Software Foundation, Inc.
+   This file is part of the GNU C Library.
+   Written by Miles Bader <miles@gnu.ai.mit.edu>.
+
+   The GNU C Library is free software; you can redistribute it and/or
+   modify it under the terms of the GNU Library General Public License as
+   published by the Free Software Foundation; either version 2 of the
+   License, or (at your option) any later version.
+
+   The GNU C Library is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+   Library General Public License for more details.
+
+   You should have received a copy of the GNU Library General Public
+   License along with the GNU C Library; see the file COPYING.LIB.  If not,
+   write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+   Boston, MA 02111-1307, USA.  */
+
+#ifdef HAVE_CONFIG_H
+#include <config.h>
+#endif
+
+#include "argp.h"
+
+/* The exit status that argp will use when exiting due to a parsing error.
+   If not defined or set by the user program, this defaults to 1.  */
+error_t argp_err_exit_status = 1;

argp/argp-fmtstream.c

@@ -0,0 +1,382 @@
+/* Word-wrapping and line-truncating streams
+   Copyright (C) 1997 Free Software Foundation, Inc.
+   This file is part of the GNU C Library.
+   Written by Miles Bader <miles@gnu.ai.mit.edu>.
+
+   The GNU C Library is free software; you can redistribute it and/or
+   modify it under the terms of the GNU Library General Public License as
+   published by the Free Software Foundation; either version 2 of the
+   License, or (at your option) any later version.
+
+   The GNU C Library is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+   Library General Public License for more details.
+
+   You should have received a copy of the GNU Library General Public
+   License along with the GNU C Library; see the file COPYING.LIB.  If not,
+   write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+   Boston, MA 02111-1307, USA.  */
+
+/* This package emulates glibc `line_wrap_stream' semantics for systems that
+   don't have that.  */
+
+#ifdef HAVE_CONFIG_H
+#include <config.h>
+#endif
+
+#include <stdlib.h>
+#include <string.h>
+#include <errno.h>
+#include <stdarg.h>
+#include <ctype.h>
+
+#include "argp-fmtstream.h"
+#include "argp-namefrob.h"
+
+#ifndef ARGP_FMTSTREAM_USE_LINEWRAP
+
+#ifndef isblank
+#define isblank(ch) ((ch)==' ' || (ch)=='\t')
+#endif
+
+#define INIT_BUF_SIZE 200
+#define PRINTF_SIZE_GUESS 150
+
+/* Return an argp_fmtstream that outputs to STREAM, and which prefixes lines
+   written on it with LMARGIN spaces and limits them to RMARGIN columns
+   total.  If WMARGIN >= 0, words that extend past RMARGIN are wrapped by
+   replacing the whitespace before them with a newline and WMARGIN spaces.
+   Otherwise, chars beyond RMARGIN are simply dropped until a newline.
+   Returns NULL if there was an error.  */
+argp_fmtstream_t
+__argp_make_fmtstream (FILE *stream,
+		       size_t lmargin, size_t rmargin, ssize_t wmargin)
+{
+  argp_fmtstream_t fs = malloc (sizeof (struct argp_fmtstream));
+  if (fs)
+    {
+      fs->stream = stream;
+
+      fs->lmargin = lmargin;
+      fs->rmargin = rmargin;
+      fs->wmargin = wmargin;
+      fs->point_col = 0;
+      fs->point_offs = 0;
+
+      fs->buf = malloc (INIT_BUF_SIZE);
+      if (! fs->buf)
+	{
+	  free (fs);
+	  fs = 0;
+	}
+      else
+	{
+	  fs->p = fs->buf;
+	  fs->end = fs->buf + INIT_BUF_SIZE;
+	}
+    }
+
+  return fs;
+}
+#ifdef weak_alias
+weak_alias (__argp_make_fmtstream, argp_make_fmtstream)
+#endif
+
+/* Flush FS to its stream, and free it (but don't close the stream).  */
+void
+__argp_fmtstream_free (argp_fmtstream_t fs)
+{
+  __argp_fmtstream_update (fs);
+  if (fs->p > fs->buf)
+    fwrite (fs->buf, 1, fs->p - fs->buf, fs->stream);
+  free (fs->buf);
+  free (fs);
+}
+#ifdef weak_alias
+weak_alias (__argp_fmtstream_free, argp_fmtstream_free)
+#endif
+
+/* Process FS's buffer so that line wrapping is done from POINT_OFFS to the
+   end of its buffer.  This code is mostly from glibc stdio/linewrap.c.  */
+void
+__argp_fmtstream_update (argp_fmtstream_t fs)
+{
+  char *buf, *nl;
+  size_t len;
+
+  /* Scan the buffer for newlines.  */
+  buf = fs->buf + fs->point_offs;
+  while (buf < fs->p)
+    {
+      size_t r;
+
+      if (fs->point_col == 0 && fs->lmargin != 0)
+	{
+	  /* We are starting a new line.  Print spaces to the left margin.  */
+	  const size_t pad = fs->lmargin;
+	  if (fs->p + pad < fs->end)
+	    {
+	      /* We can fit in them in the buffer by moving the
+		 buffer text up and filling in the beginning.  */
+	      memmove (buf + pad, buf, fs->p - buf);
+	      fs->p += pad; /* Compensate for bigger buffer. */
+	      memset (buf, ' ', pad); /* Fill in the spaces.  */
+	      buf += pad; /* Don't bother searching them.  */
+	    }
+	  else
+	    {
+	      /* No buffer space for spaces.  Must flush.  */
+	      size_t i;
+	      for (i = 0; i < pad; i++)
+		putc (' ', fs->stream);
+	    }
+	  fs->point_col = pad;
+	}
+
+      len = fs->p - buf;
+      nl = memchr (buf, '\n', len);
+
+      if (fs->point_col < 0)
+	fs->point_col = 0;
+
+      if (!nl)
+	{
+	  /* The buffer ends in a partial line.  */
+
+	  if (fs->point_col + len < fs->rmargin)
+	    {
+	      /* The remaining buffer text is a partial line and fits
+		 within the maximum line width.  Advance point for the
+		 characters to be written and stop scanning.  */
+	      fs->point_col += len;
+	      break;
+	    }
+	  else
+	    /* Set the end-of-line pointer for the code below to
+	       the end of the buffer.  */
+	    nl = fs->p;
+	}
+      else if (fs->point_col + (nl - buf) < (ssize_t) fs->rmargin)
+	{
+	  /* The buffer contains a full line that fits within the maximum
+	     line width.  Reset point and scan the next line.  */
+	  fs->point_col = 0;
+	  buf = nl + 1;
+	  continue;
+	}
+
+      /* This line is too long.  */
+      r = fs->rmargin - 1;
+
+      if (fs->wmargin < 0)
+	{
+	  /* Truncate the line by overwriting the excess with the
+	     newline and anything after it in the buffer.  */
+	  if (nl < fs->p)
+	    {
+	      memmove (buf + (r - fs->point_col), nl, fs->p - nl);
+	      fs->p -= buf + (r - fs->point_col) - nl;
+	      /* Reset point for the next line and start scanning it.  */
+	      fs->point_col = 0;
+	      buf += r + 1; /* Skip full line plus \n. */
+	    }
+	  else
+	    {
+	      /* The buffer ends with a partial line that is beyond the
+		 maximum line width.  Advance point for the characters
+		 written, and discard those past the max from the buffer.  */
+	      fs->point_col += len;
+	      fs->p -= fs->point_col - r;
+	      break;
+	    }
+	}
+      else
+	{
+	  /* Do word wrap.  Go to the column just past the maximum line
+	     width and scan back for the beginning of the word there.
+	     Then insert a line break.  */
+
+	  char *p, *nextline;
+	  int i;
+
+	  p = buf + (r + 1 - fs->point_col);
+	  while (p >= buf && !isblank (*p))
+	    --p;
+	  nextline = p + 1;	/* This will begin the next line.  */
+
+	  if (nextline > buf)
+	    {
+	      /* Swallow separating blanks.  */
+	      if (p > buf)
+		do
+		  --p;
+		while (p > buf && isblank (*p));
+	      nl = p + 1;	/* The newline will replace the first blank. */
+	    }
+	  else
+	    {
+	      /* A single word that is greater than the maximum line width.
+		 Oh well.  Put it on an overlong line by itself.  */
+	      p = buf + (r + 1 - fs->point_col);
+	      /* Find the end of the long word.  */
+	      do
+		++p;
+	      while (p < nl && !isblank (*p));
+	      if (p == nl)
+		{
+		  /* It already ends a line.  No fussing required.  */
+		  fs->point_col = 0;
+		  buf = nl + 1;
+		  continue;
+		}
+	      /* We will move the newline to replace the first blank.  */
+	      nl = p;
+	      /* Swallow separating blanks.  */
+	      do
+		++p;
+	      while (isblank (*p));
+	      /* The next line will start here.  */
+	      nextline = p;
+	    }
+
+	  /* Note: There are a bunch of tests below for
+	     NEXTLINE == BUF + LEN + 1; this case is where NL happens to fall
+	     at the end of the buffer, and NEXTLINE is in fact empty (and so
+	     we need not be careful to maintain its contents).  */
+
+	  if (nextline == buf + len + 1
+	      ? fs->end - nl < fs->wmargin + 1
+	      : nextline - (nl + 1) < fs->wmargin)
+	    /* The margin needs more blanks than we removed.  */
+	    if (fs->end - fs->p > fs->wmargin + 1)
+	      /* Make some space for them.  */
+	      {
+		size_t mv = fs->p - nextline;
+		memmove (nl + 1 + fs->wmargin, nextline, mv);
+		nextline = nl + 1 + fs->wmargin;
+		len = nextline + mv - buf;
+		*nl++ = '\n';
+	      }
+	    else
+	      /* Output the first line so we can use the space.  */
+	      {
+		if (nl > fs->buf)
+		  fwrite (fs->buf, 1, nl - fs->buf, fs->stream);
+		putc ('\n', fs->stream);
+		len += buf - fs->buf;
+		nl = buf = fs->buf;
+	      }
+	  else
+	    /* We can fit the newline and blanks in before
+	       the next word.  */
+	    *nl++ = '\n';
+
+	  if (nextline - nl >= fs->wmargin
+	      || (nextline == buf + len + 1 && fs->end - nextline >= fs->wmargin))
+	    /* Add blanks up to the wrap margin column.  */
+	    for (i = 0; i < fs->wmargin; ++i)
+	      *nl++ = ' ';
+	  else
+	    for (i = 0; i < fs->wmargin; ++i)
+	      putc (' ', fs->stream);
+
+	  /* Copy the tail of the original buffer into the current buffer
+	     position.  */
+	  if (nl < nextline)
+	    memmove (nl, nextline, buf + len - nextline);
+	  len -= nextline - buf;
+
+	  /* Continue the scan on the remaining lines in the buffer.  */
+	  buf = nl;
+
+	  /* Restore bufp to include all the remaining text.  */
+	  fs->p = nl + len;
+
+	  /* Reset the counter of what has been output this line.  If wmargin
+	     is 0, we want to avoid the lmargin getting added, so we set
+	     point_col to a magic value of -1 in that case.  */
+	  fs->point_col = fs->wmargin ? fs->wmargin : -1;
+	}
+    }
+
+  /* Remember that we've scanned as far as the end of the buffer.  */
+  fs->point_offs = fs->p - fs->buf;
+}
+
+/* Ensure that FS has space for AMOUNT more bytes in its buffer, either by
+   growing the buffer, or by flushing it.  True is returned iff we succeed. */
+int
+__argp_fmtstream_ensure (struct argp_fmtstream *fs, size_t amount)
+{
+  if ((size_t) (fs->end - fs->p) < amount)
+    {
+      ssize_t wrote;
+
+      /* Flush FS's buffer.  */
+      __argp_fmtstream_update (fs);
+
+      wrote = fwrite (fs->buf, 1, fs->p - fs->buf, fs->stream);
+      if (wrote == fs->p - fs->buf)
+	{
+	  fs->p = fs->buf;
+	  fs->point_offs = 0;
+	}
+      else
+	{
+	  fs->p -= wrote;
+	  fs->point_offs -= wrote;
+	  memmove (fs->buf, fs->buf + wrote, fs->p - fs->buf);
+	  return 0;
+	}
+
+      if ((size_t) (fs->end - fs->buf) < amount)
+	/* Gotta grow the buffer.  */
+	{
+	  size_t new_size = fs->end - fs->buf + amount;
+	  char *new_buf = realloc (fs->buf, new_size);
+
+	  if (! new_buf)
+	    {
+	      __set_errno (ENOMEM);
+	      return 0;
+	    }
+
+	  fs->buf = new_buf;
+	  fs->end = new_buf + new_size;
+	  fs->p = fs->buf;
+	}
+    }
+
+  return 1;
+}
+
+ssize_t
+__argp_fmtstream_printf (struct argp_fmtstream *fs, const char *fmt, ...)
+{
+  int out;
+  size_t size_guess = PRINTF_SIZE_GUESS; /* How much space to reserve. */
+
+  do
+    {
+      va_list args;
+
+      if (! __argp_fmtstream_ensure (fs, size_guess))
+	return -1;
+      size_guess += size_guess;
+
+      va_start (args, fmt);
+      out = __vsnprintf (fs->p, fs->end - fs->p, fmt, args);
+      va_end (args);
+    }
+  while (out == -1);
+
+  fs->p += out;
+
+  return out;
+}
+#ifdef weak_alias
+weak_alias (__argp_fmtstream_printf, argp_fmtstream_printf)
+#endif
+
+#endif /* !ARGP_FMTSTREAM_USE_LINEWRAP */

argp/argp-fmtstream.h

@@ -0,0 +1,297 @@
+/* Word-wrapping and line-truncating streams.
+   Copyright (C) 1997 Free Software Foundation, Inc.
+   This file is part of the GNU C Library.
+   Written by Miles Bader <miles@gnu.ai.mit.edu>.
+
+   The GNU C Library is free software; you can redistribute it and/or
+   modify it under the terms of the GNU Library General Public License as
+   published by the Free Software Foundation; either version 2 of the
+   License, or (at your option) any later version.
+
+   The GNU C Library is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+   Library General Public License for more details.
+
+   You should have received a copy of the GNU Library General Public
+   License along with the GNU C Library; see the file COPYING.LIB.  If not,
+   write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+   Boston, MA 02111-1307, USA.  */
+
+/* This package emulates glibc `line_wrap_stream' semantics for systems that
+   don't have that.  If the system does have it, it is just a wrapper for
+   that.  This header file is only used internally while compiling argp, and
+   shouldn't be installed.  */
+
+#ifndef __ARGP_FMTSTREAM_H__
+#define __ARGP_FMTSTREAM_H__
+
+#ifdef HAVE_CONFIG_H
+#include <config.h>
+#endif
+
+#include <stdio.h>
+#include <string.h>
+#include <unistd.h>
+
+#if    (_LIBC - 0 && !defined (USE_IN_LIBIO)) \
+    || (defined (__GNU_LIBRARY__) && defined (HAVE_LINEWRAP_H))
+/* line_wrap_stream is available, so use that.  */
+#define ARGP_FMTSTREAM_USE_LINEWRAP
+#endif
+
+#ifdef ARGP_FMTSTREAM_USE_LINEWRAP
+/* Just be a simple wrapper for line_wrap_stream; the semantics are
+   *slightly* different, as line_wrap_stream doesn't actually make a new
+   object, it just modifies the given stream (reversibly) to do
+   line-wrapping.  Since we control who uses this code, it doesn't matter.  */
+
+#include <linewrap.h>
+
+typedef FILE *argp_fmtstream_t;
+
+#define argp_make_fmtstream line_wrap_stream
+#define __argp_make_fmtstream line_wrap_stream
+#define argp_fmtstream_free line_unwrap_stream
+#define __argp_fmtstream_free line_unwrap_stream
+
+#define __argp_fmtstream_putc(fs,ch) putc(ch,fs)
+#define argp_fmtstream_putc(fs,ch) putc(ch,fs)
+#define __argp_fmtstream_puts(fs,str) fputs(str,fs)
+#define argp_fmtstream_puts(fs,str) fputs(str,fs)
+#define __argp_fmtstream_write(fs,str,len) fwrite(str,1,len,fs)
+#define argp_fmtstream_write(fs,str,len) fwrite(str,1,len,fs)
+#define __argp_fmtstream_printf fprintf
+#define argp_fmtstream_printf fprintf
+
+#define __argp_fmtstream_lmargin line_wrap_lmargin
+#define argp_fmtstream_lmargin line_wrap_lmargin
+#define __argp_fmtstream_set_lmargin line_wrap_set_lmargin
+#define argp_fmtstream_set_lmargin line_wrap_set_lmargin
+#define __argp_fmtstream_rmargin line_wrap_rmargin
+#define argp_fmtstream_rmargin line_wrap_rmargin
+#define __argp_fmtstream_set_rmargin line_wrap_set_rmargin
+#define argp_fmtstream_set_rmargin line_wrap_set_rmargin
+#define __argp_fmtstream_wmargin line_wrap_wmargin
+#define argp_fmtstream_wmargin line_wrap_wmargin
+#define __argp_fmtstream_set_wmargin line_wrap_set_wmargin
+#define argp_fmtstream_set_wmargin line_wrap_set_wmargin
+#define __argp_fmtstream_point line_wrap_point
+#define argp_fmtstream_point line_wrap_point
+
+#else /* !ARGP_FMTSTREAM_USE_LINEWRAP */
+/* Guess we have to define our own version.  */
+
+#ifndef __const
+#define __const const
+#endif
+
+struct argp_fmtstream
+{
+  FILE *stream;			/* The stream we're outputting to.  */
+
+  size_t lmargin, rmargin;	/* Left and right margins.  */
+  ssize_t wmargin;		/* Margin to wrap to, or -1 to truncate.  */
+
+  /* Point in buffer to which we've processed for wrapping, but not output.  */
+  size_t point_offs;
+  /* Output column at POINT_OFFS, or -1 meaning 0 but don't add lmargin.  */
+  ssize_t point_col;
+
+  char *buf;			/* Output buffer.  */
+  char *p;			/* Current end of text in BUF. */
+  char *end;			/* Absolute end of BUF.  */
+};
+
+typedef struct argp_fmtstream *argp_fmtstream_t;
+
+/* Return an argp_fmtstream that outputs to STREAM, and which prefixes lines
+   written on it with LMARGIN spaces and limits them to RMARGIN columns
+   total.  If WMARGIN >= 0, words that extend past RMARGIN are wrapped by
+   replacing the whitespace before them with a newline and WMARGIN spaces.
+   Otherwise, chars beyond RMARGIN are simply dropped until a newline.
+   Returns NULL if there was an error.  */
+extern argp_fmtstream_t __argp_make_fmtstream (FILE *__stream,
+					       size_t __lmargin,
+					       size_t __rmargin,
+					       ssize_t __wmargin);
+extern argp_fmtstream_t argp_make_fmtstream (FILE *__stream,
+					     size_t __lmargin,
+					     size_t __rmargin,
+					     ssize_t __wmargin);
+
+/* Flush __FS to its stream, and free it (but don't close the stream).  */
+extern void __argp_fmtstream_free (argp_fmtstream_t __fs);
+extern void argp_fmtstream_free (argp_fmtstream_t __fs);
+
+extern ssize_t __argp_fmtstream_printf (argp_fmtstream_t __fs,
+				       __const char *__fmt, ...)
+     __attribute__ ((__format__ (printf, 2, 3)));
+extern ssize_t argp_fmtstream_printf (argp_fmtstream_t __fs,
+				      __const char *__fmt, ...)
+     __attribute__ ((__format__ (printf, 2, 3)));
+
+extern int __argp_fmtstream_putc (argp_fmtstream_t __fs, int __ch);
+extern int argp_fmtstream_putc (argp_fmtstream_t __fs, int __ch);
+
+extern int __argp_fmtstream_puts (argp_fmtstream_t __fs, __const char *__str);
+extern int argp_fmtstream_puts (argp_fmtstream_t __fs, __const char *__str);
+
+extern size_t __argp_fmtstream_write (argp_fmtstream_t __fs,
+				      __const char *__str, size_t __len);
+extern size_t argp_fmtstream_write (argp_fmtstream_t __fs,
+				    __const char *__str, size_t __len);
+
+/* Access macros for various bits of state.  */
+#define argp_fmtstream_lmargin(__fs) ((__fs)->lmargin)
+#define argp_fmtstream_rmargin(__fs) ((__fs)->rmargin)
+#define argp_fmtstream_wmargin(__fs) ((__fs)->wmargin)
+#define __argp_fmtstream_lmargin argp_fmtstream_lmargin
+#define __argp_fmtstream_rmargin argp_fmtstream_rmargin
+#define __argp_fmtstream_wmargin argp_fmtstream_wmargin
+
+/* Set __FS's left margin to LMARGIN and return the old value.  */
+extern size_t argp_fmtstream_set_lmargin (argp_fmtstream_t __fs,
+					  size_t __lmargin);
+extern size_t __argp_fmtstream_set_lmargin (argp_fmtstream_t __fs,
+					    size_t __lmargin);
+
+/* Set __FS's right margin to __RMARGIN and return the old value.  */
+extern size_t argp_fmtstream_set_rmargin (argp_fmtstream_t __fs,
+					  size_t __rmargin);
+extern size_t __argp_fmtstream_set_rmargin (argp_fmtstream_t __fs,
+					    size_t __rmargin);
+
+/* Set __FS's wrap margin to __WMARGIN and return the old value.  */
+extern size_t argp_fmtstream_set_wmargin (argp_fmtstream_t __fs,
+					  size_t __wmargin);
+extern size_t __argp_fmtstream_set_wmargin (argp_fmtstream_t __fs,
+					    size_t __wmargin);
+
+/* Return the column number of the current output point in __FS.  */
+extern size_t argp_fmtstream_point (argp_fmtstream_t __fs);
+extern size_t __argp_fmtstream_point (argp_fmtstream_t __fs);
+
+/* Internal routines.  */
+extern void _argp_fmtstream_update (argp_fmtstream_t __fs);
+extern void __argp_fmtstream_update (argp_fmtstream_t __fs);
+extern int _argp_fmtstream_ensure (argp_fmtstream_t __fs, size_t __amount);
+extern int __argp_fmtstream_ensure (argp_fmtstream_t __fs, size_t __amount);
+
+#ifdef __OPTIMIZE__
+/* Inline versions of above routines.  */
+
+#if !_LIBC
+#define __argp_fmtstream_putc argp_fmtstream_putc
+#define __argp_fmtstream_puts argp_fmtstream_puts
+#define __argp_fmtstream_write argp_fmtstream_write
+#define __argp_fmtstream_set_lmargin argp_fmtstream_set_lmargin
+#define __argp_fmtstream_set_rmargin argp_fmtstream_set_rmargin
+#define __argp_fmtstream_set_wmargin argp_fmtstream_set_wmargin
+#define __argp_fmtstream_point argp_fmtstream_point
+#define __argp_fmtstream_update _argp_fmtstream_update
+#define __argp_fmtstream_ensure _argp_fmtstream_ensure
+#endif
+
+#ifndef ARGP_FS_EI
+#define ARGP_FS_EI extern inline
+#endif
+
+ARGP_FS_EI size_t
+__argp_fmtstream_write (argp_fmtstream_t __fs,
+			__const char *__str, size_t __len)
+{
+  if (__fs->p + __len <= __fs->end || __argp_fmtstream_ensure (__fs, __len))
+    {
+      memcpy (__fs->p, __str, __len);
+      __fs->p += __len;
+      return __len;
+    }
+  else
+    return 0;
+}
+
+ARGP_FS_EI int
+__argp_fmtstream_puts (argp_fmtstream_t __fs, __const char *__str)
+{
+  size_t __len = strlen (__str);
+  if (__len)
+    {
+      size_t __wrote = __argp_fmtstream_write (__fs, __str, __len);
+      return __wrote == __len ? 0 : -1;
+    }
+  else
+    return 0;
+}
+
+ARGP_FS_EI int
+__argp_fmtstream_putc (argp_fmtstream_t __fs, int __ch)
+{
+  if (__fs->p < __fs->end || __argp_fmtstream_ensure (__fs, 1))
+    return *__fs->p++ = __ch;
+  else
+    return EOF;
+}
+
+/* Set __FS's left margin to __LMARGIN and return the old value.  */
+ARGP_FS_EI size_t
+__argp_fmtstream_set_lmargin (argp_fmtstream_t __fs, size_t __lmargin)
+{
+  size_t __old;
+  if ((size_t) (__fs->p - __fs->buf) > __fs->point_offs)
+    __argp_fmtstream_update (__fs);
+  __old = __fs->lmargin;
+  __fs->lmargin = __lmargin;
+  return __old;
+}
+
+/* Set __FS's right margin to __RMARGIN and return the old value.  */
+ARGP_FS_EI size_t
+__argp_fmtstream_set_rmargin (argp_fmtstream_t __fs, size_t __rmargin)
+{
+  size_t __old;
+  if ((size_t) (__fs->p - __fs->buf) > __fs->point_offs)
+    __argp_fmtstream_update (__fs);
+  __old = __fs->rmargin;
+  __fs->rmargin = __rmargin;
+  return __old;
+}
+
+/* Set FS's wrap margin to __WMARGIN and return the old value.  */
+ARGP_FS_EI size_t
+__argp_fmtstream_set_wmargin (argp_fmtstream_t __fs, size_t __wmargin)
+{
+  size_t __old;
+  if ((size_t) (__fs->p - __fs->buf) > __fs->point_offs)
+    __argp_fmtstream_update (__fs);
+  __old = __fs->wmargin;
+  __fs->wmargin = __wmargin;
+  return __old;
+}
+
+/* Return the column number of the current output point in __FS.  */
+ARGP_FS_EI size_t
+__argp_fmtstream_point (argp_fmtstream_t __fs)
+{
+  if ((size_t) (__fs->p - __fs->buf) > __fs->point_offs)
+    __argp_fmtstream_update (__fs);
+  return __fs->point_col >= 0 ? __fs->point_col : 0;
+}
+
+#if !_LIBC
+#undef __argp_fmtstream_putc
+#undef __argp_fmtstream_puts
+#undef __argp_fmtstream_write
+#undef __argp_fmtstream_set_lmargin
+#undef __argp_fmtstream_set_rmargin
+#undef __argp_fmtstream_set_wmargin
+#undef __argp_fmtstream_point
+#undef __argp_fmtstream_update
+#undef __argp_fmtstream_ensure
+#endif
+
+#endif /* __OPTIMIZE__ */
+
+#endif /* ARGP_FMTSTREAM_USE_LINEWRAP */
+
+#endif /* __ARGP_FMTSTREAM_H__ */

argp/argp-fs-xinl.c

@@ -0,0 +1,41 @@
+/* Real definitions for extern inline functions in argp-fmtstream.h
+   Copyright (C) 1997 Free Software Foundation, Inc.
+   This file is part of the GNU C Library.
+   Written by Miles Bader <miles@gnu.ai.mit.edu>.
+
+   The GNU C Library is free software; you can redistribute it and/or
+   modify it under the terms of the GNU Library General Public License as
+   published by the Free Software Foundation; either version 2 of the
+   License, or (at your option) any later version.
+
+   The GNU C Library is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+   Library General Public License for more details.
+
+   You should have received a copy of the GNU Library General Public
+   License along with the GNU C Library; see the file COPYING.LIB.  If not,
+   write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+   Boston, MA 02111-1307, USA.  */
+
+#ifdef HAVE_CONFIG_H
+#include <config.h>
+#endif
+
+#define ARGP_FS_EI
+#undef __OPTIMIZE__
+#define __OPTIMIZE__
+#include "argp-fmtstream.h"
+
+/* Add weak aliases.  */
+#if _LIBC - 0 && !defined (ARGP_FMTSTREAM_USE_LINEWRAP) && defined (weak_alias)
+
+weak_alias (__argp_fmtstream_putc, argp_fmtstream_putc)
+weak_alias (__argp_fmtstream_puts, argp_fmtstream_puts)
+weak_alias (__argp_fmtstream_write, argp_fmtstream_write)
+weak_alias (__argp_fmtstream_set_lmargin, argp_fmtstream_set_lmargin)
+weak_alias (__argp_fmtstream_set_rmargin, argp_fmtstream_set_rmargin)
+weak_alias (__argp_fmtstream_set_wmargin, argp_fmtstream_set_wmargin)
+weak_alias (__argp_fmtstream_point, argp_fmtstream_point)
+
+#endif

argp/argp-namefrob.h

@@ -0,0 +1,92 @@
+/* Name frobnication for compiling argp outside of glibc
+   Copyright (C) 1997 Free Software Foundation, Inc.
+   This file is part of the GNU C Library.
+   Written by Miles Bader <miles@gnu.ai.mit.edu>.
+
+   The GNU C Library is free software; you can redistribute it and/or
+   modify it under the terms of the GNU Library General Public License as
+   published by the Free Software Foundation; either version 2 of the
+   License, or (at your option) any later version.
+
+   The GNU C Library is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+   Library General Public License for more details.
+
+   You should have received a copy of the GNU Library General Public
+   License along with the GNU C Library; see the file COPYING.LIB.  If not,
+   write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+   Boston, MA 02111-1307, USA.  */
+
+#if !_LIBC
+/* This code is written for inclusion in gnu-libc, and uses names in the
+   namespace reserved for libc.  If we're not compiling in libc, define those
+   names to be the normal ones instead.  */
+
+/* argp-parse functions */
+#undef __argp_parse
+#define __argp_parse argp_parse
+#undef __option_is_end
+#define __option_is_end _option_is_end
+#undef __option_is_short
+#define __option_is_short _option_is_short
+#undef __argp_input
+#define __argp_input _argp_input
+
+/* argp-help functions */
+#undef __argp_help
+#define __argp_help argp_help
+#undef __argp_error
+#define __argp_error argp_error
+#undef __argp_failure
+#define __argp_failure argp_failure
+#undef __argp_state_help
+#define __argp_state_help argp_state_help
+#undef __argp_usage
+#define __argp_usage argp_usage
+
+/* argp-fmtstream functions */
+#undef __argp_make_fmtstream
+#define __argp_make_fmtstream argp_make_fmtstream
+#undef __argp_fmtstream_free
+#define __argp_fmtstream_free argp_fmtstream_free
+#undef __argp_fmtstream_putc
+#define __argp_fmtstream_putc argp_fmtstream_putc
+#undef __argp_fmtstream_puts
+#define __argp_fmtstream_puts argp_fmtstream_puts
+#undef __argp_fmtstream_write
+#define __argp_fmtstream_write argp_fmtstream_write
+#undef __argp_fmtstream_printf
+#define __argp_fmtstream_printf argp_fmtstream_printf
+#undef __argp_fmtstream_set_lmargin
+#define __argp_fmtstream_set_lmargin argp_fmtstream_set_lmargin
+#undef __argp_fmtstream_set_rmargin
+#define __argp_fmtstream_set_rmargin argp_fmtstream_set_rmargin
+#undef __argp_fmtstream_set_wmargin
+#define __argp_fmtstream_set_wmargin argp_fmtstream_set_wmargin
+#undef __argp_fmtstream_point
+#define __argp_fmtstream_point argp_fmtstream_point
+#undef __argp_fmtstream_update
+#define __argp_fmtstream_update _argp_fmtstream_update
+#undef __argp_fmtstream_ensure
+#define __argp_fmtstream_ensure _argp_fmtstream_ensure
+#undef __argp_fmtstream_lmargin
+#define __argp_fmtstream_lmargin argp_fmtstream_lmargin
+#undef __argp_fmtstream_rmargin
+#define __argp_fmtstream_rmargin argp_fmtstream_rmargin
+#undef __argp_fmtstream_wmargin
+#define __argp_fmtstream_wmargin argp_fmtstream_wmargin
+
+/* normal libc functions we call */
+#undef __sleep
+#define __sleep sleep
+#undef __strcasecmp
+#define __strcasecmp strcasecmp
+#undef __vsnprintf
+#define __vsnprintf vsnprintf
+
+#endif /* !_LIBC */
+
+#ifndef __set_errno
+#define __set_errno(e) (errno = (e))
+#endif

argp/argp-parse.c

@@ -0,0 +1,888 @@
+/* Hierarchial argument parsing, layered over getopt
+   Copyright (C) 1995, 1996, 1997 Free Software Foundation, Inc.
+   This file is part of the GNU C Library.
+   Written by Miles Bader <miles@gnu.ai.mit.edu>.
+
+   The GNU C Library is free software; you can redistribute it and/or
+   modify it under the terms of the GNU Library General Public License as
+   published by the Free Software Foundation; either version 2 of the
+   License, or (at your option) any later version.
+
+   The GNU C Library is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+   Library General Public License for more details.
+
+   You should have received a copy of the GNU Library General Public
+   License along with the GNU C Library; see the file COPYING.LIB.  If not,
+   write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+   Boston, MA 02111-1307, USA.  */
+
+#ifdef HAVE_CONFIG_H
+#include <config.h>
+#endif
+
+#include <stdlib.h>
+#include <string.h>
+#include <unistd.h>
+#include <limits.h>
+#include <getopt.h>
+
+#ifndef _
+/* This is for other GNU distributions with internationalized messages.
+   When compiling libc, the _ macro is predefined.  */
+#ifdef HAVE_LIBINTL_H
+# include <libintl.h>
+# define _(msgid)       gettext (msgid)
+#else
+# define _(msgid)       (msgid)
+# define gettext(msgid) (msgid)
+#endif
+#endif
+
+#if _LIBC - 0
+#include <libc-lock.h>
+#else
+#ifdef HAVE_CTHREADS_H
+#include <cthreads.h>
+#endif
+#endif /* _LIBC */
+
+#include "argp.h"
+#include "argp-namefrob.h"
+
+/* Getopt return values.  */
+#define KEY_END (-1)		/* The end of the options.  */
+#define KEY_ARG 1		/* A non-option argument.  */
+#define KEY_ERR '?'		/* An error parsing the options.  */
+
+/* The meta-argument used to prevent any further arguments being interpreted
+   as options.  */
+#define QUOTE "--"
+
+/* The number of bits we steal in a long-option value for our own use.  */
+#define GROUP_BITS CHAR_BIT
+
+/* The number of bits available for the user value.  */
+#define USER_BITS ((sizeof ((struct option *)0)->val * CHAR_BIT) - GROUP_BITS)
+#define USER_MASK ((1 << USER_BITS) - 1)
+
+/* EZ alias for ARGP_ERR_UNKNOWN.  */
+#define EBADKEY ARGP_ERR_UNKNOWN
+
+/* Default options.  */
+
+/* When argp is given the --HANG switch, _ARGP_HANG is set and argp will sleep
+   for one second intervals, decrementing _ARGP_HANG until it's zero.  Thus
+   you can force the program to continue by attaching a debugger and setting
+   it to 0 yourself.  */
+volatile int _argp_hang = 0;
+
+#define OPT_PROGNAME	-2
+#define OPT_USAGE	-3
+#define OPT_HANG	-4
+
+static const struct argp_option argp_default_options[] =
+{
+  {"help",	  '?',    	0, 0,  "Give this help list", -1},
+  {"usage",	  OPT_USAGE,	0, 0,  "Give a short usage message"},
+  {"program-name",OPT_PROGNAME,"NAME", OPTION_HIDDEN, "Set the program name"},
+  {"HANG",	  OPT_HANG,    "SECS", OPTION_ARG_OPTIONAL | OPTION_HIDDEN,
+     "Hang for SECS seconds (default 3600)"},
+  {0, 0}
+};
+
+static error_t
+argp_default_parser (int key, char *arg, struct argp_state *state)
+{
+  switch (key)
+    {
+    case '?':
+      __argp_state_help (state, state->out_stream, ARGP_HELP_STD_HELP);
+      break;
+    case OPT_USAGE:
+      __argp_state_help (state, state->out_stream,
+		       ARGP_HELP_USAGE | ARGP_HELP_EXIT_OK);
+      break;
+
+    case OPT_PROGNAME:		/* Set the program name.  */
+      program_invocation_name = arg;
+
+      /* [Note that some systems only have PROGRAM_INVOCATION_SHORT_NAME (aka
+	 __PROGNAME), in which case, PROGRAM_INVOCATION_NAME is just defined
+	 to be that, so we have to be a bit careful here.]  */
+      arg = strrchr (arg, '/');
+      if (arg)
+	program_invocation_short_name = arg + 1;
+      else
+	program_invocation_short_name = program_invocation_name;
+
+      /* Update what we use for messages.  */
+      state->name = program_invocation_short_name;
+
+      if ((state->flags & (ARGP_PARSE_ARGV0 | ARGP_NO_ERRS))
+	  == ARGP_PARSE_ARGV0)
+	/* Update what getopt uses too.  */
+	state->argv[0] = program_invocation_name;
+
+      break;
+
+    case OPT_HANG:
+      _argp_hang = atoi (arg ? arg : "3600");
+      while (_argp_hang-- > 0)
+	__sleep (1);
+      break;
+
+    default:
+      return EBADKEY;
+    }
+  return 0;
+}
+
+static const struct argp argp_default_argp =
+  {argp_default_options, &argp_default_parser};
+
+
+static const struct argp_option argp_version_options[] =
+{
+  {"version",	  'V',    	0, 0,  "Print program version", -1},
+  {0, 0}
+};
+
+static error_t
+argp_version_parser (int key, char *arg, struct argp_state *state)
+{
+  switch (key)
+    {
+    case 'V':
+      if (argp_program_version_hook)
+	(*argp_program_version_hook) (state->out_stream, state);
+      else if (argp_program_version)
+	fprintf (state->out_stream, "%s\n", argp_program_version);
+      else
+	__argp_error (state, _("No version known!?"));
+      if (! (state->flags & ARGP_NO_EXIT))
+	exit (0);
+      break;
+    default:
+      return EBADKEY;
+    }
+  return 0;
+}
+
+static const struct argp argp_version_argp =
+  {argp_version_options, &argp_version_parser};
+
+/* Returns the offset into the getopt long options array LONG_OPTIONS of a
+   long option with called NAME, or -1 if none is found.  Passing NULL as
+   NAME will return the number of options.  */
+static int
+find_long_option (struct option *long_options, const char *name)
+{
+  struct option *l = long_options;
+  while (l->name != NULL)
+    if (name != NULL && strcmp (l->name, name) == 0)
+      return l - long_options;
+    else
+      l++;
+  if (name == NULL)
+    return l - long_options;
+  else
+    return -1;
+}
+
+/* If we can, we regulate access to getopt, which is non-reentrant, with a
+   mutex.  Since the case we're trying to guard against is two different
+   threads interfering, and it's possible that someone might want to call
+   argp_parse recursively (they're careful), we use a recursive lock if
+   possible.  */
+
+#if _LIBC - 0
+
+__libc_lock_define_initialized_recursive (static, getopt_lock)
+#define LOCK_GETOPT   __libc_lock_lock_recursive (getopt_lock)
+#define UNLOCK_GETOPT __libc_lock_unlock_recursive (getopt_lock)
+
+#else /* !_LIBC */
+#ifdef HAVE_CTHREADS_H
+
+static struct mutex getopt_lock = MUTEX_INITIALIZER;
+#define LOCK_GETOPT   mutex_lock (&getopt_lock)
+#define UNLOCK_GETOPT mutex_unlock (&getopt_lock)
+
+#else /* !HAVE_CTHREADS_H */
+
+#define LOCK_GETOPT    (void)0
+#define UNLOCK_GETOPT  (void)0
+
+#endif /* HAVE_CTHREADS_H */
+#endif /* _LIBC */
+
+/* This hack to allow programs that know what's going on to call argp
+   recursively.  If someday argp is changed not to use the non-reentrant
+   getopt interface, we can get rid of this shit.  XXX */
+void
+_argp_unlock_xxx (void)
+{
+  UNLOCK_GETOPT;
+}
+
+/* The state of a `group' during parsing.  Each group corresponds to a
+   particular argp structure from the tree of such descending from the top
+   level argp passed to argp_parse.  */
+struct group
+{
+  /* This group's parsing function.  */
+  argp_parser_t parser;
+
+  /* Which argp this group is from.  */
+  const struct argp *argp;
+
+  /* Points to the point in SHORT_OPTS corresponding to the end of the short
+     options for this group.  We use it to determine from which group a
+     particular short options is from.  */
+  char *short_end;
+
+  /* The number of non-option args sucessfully handled by this parser.  */
+  unsigned args_processed;
+
+  /* This group's parser's parent's group.  */
+  struct group *parent;
+  unsigned parent_index;	/* And the our position in the parent.   */
+
+  /* These fields are swapped into and out of the state structure when
+     calling this group's parser.  */
+  void *input, **child_inputs;
+  void *hook;
+};
+
+/* Call GROUP's parser with KEY and ARG, swapping any group-specific info
+   from STATE before calling, and back into state afterwards.  If GROUP has
+   no parser, EBADKEY is returned.  */
+static error_t
+group_parse (struct group *group, struct argp_state *state, int key, char *arg)
+{
+  if (group->parser)
+    {
+      error_t err;
+      state->hook = group->hook;
+      state->input = group->input;
+      state->child_inputs = group->child_inputs;
+      state->arg_num = group->args_processed;
+      err = (*group->parser)(key, arg, state);
+      group->hook = state->hook;
+      return err;
+    }
+  else
+    return EBADKEY;
+}
+
+struct parser
+{
+  const struct argp *argp;
+
+  /* SHORT_OPTS is the getopt short options string for the union of all the
+     groups of options.  */
+  char *short_opts;
+  /* LONG_OPTS is the array of getop long option structures for the union of
+     all the groups of options.  */
+  struct option *long_opts;
+
+  /* States of the various parsing groups.  */
+  struct group *groups;
+  /* The end of the GROUPS array.  */
+  struct group *egroup;
+  /* An vector containing storage for the CHILD_INPUTS field in all groups.  */
+  void **child_inputs;
+
+  /* True if we think using getopt is still useful; if false, then
+     remaining arguments are just passed verbatim with ARGP_KEY_ARG.  This is
+     cleared whenever getopt returns KEY_END, but may be set again if the user
+     moves the next argument pointer backwards.  */
+  int try_getopt;
+
+  /* State block supplied to parsing routines.  */
+  struct argp_state state;
+
+  /* Memory used by this parser.  */
+  void *storage;
+};
+
+/* The next usable entries in the various parser tables being filled in by
+   convert_options.  */
+struct parser_convert_state
+{
+  struct parser *parser;
+  char *short_end;
+  struct option *long_end;
+  void **child_inputs_end;
+};
+
+/* Converts all options in ARGP (which is put in GROUP) and ancestors
+   into getopt options stored in SHORT_OPTS and LONG_OPTS; SHORT_END and
+   CVT->LONG_END are the points at which new options are added.  Returns the
+   next unused group entry.  CVT holds state used during the conversion.  */
+static struct group *
+convert_options (const struct argp *argp,
+		 struct group *parent, unsigned parent_index,
+		 struct group *group, struct parser_convert_state *cvt)
+{
+  /* REAL is the most recent non-alias value of OPT.  */
+  const struct argp_option *real = argp->options;
+  const struct argp_child *children = argp->children;
+
+  if (real || argp->parser)
+    {
+      const struct argp_option *opt;
+
+      if (real)
+	for (opt = real; !__option_is_end (opt); opt++)
+	  {
+	    if (! (opt->flags & OPTION_ALIAS))
+	      /* OPT isn't an alias, so we can use values from it.  */
+	      real = opt;
+
+	    if (! (real->flags & OPTION_DOC))
+	      /* A real option (not just documentation).  */
+	      {
+		if (__option_is_short (opt))
+		  /* OPT can be used as a short option.  */
+		  {
+		    *cvt->short_end++ = opt->key;
+		    if (real->arg)
+		      {
+			*cvt->short_end++ = ':';
+			if (real->flags & OPTION_ARG_OPTIONAL)
+			  *cvt->short_end++ = ':';
+		      }
+		    *cvt->short_end = '\0'; /* keep 0 terminated */
+		  }
+
+		if (opt->name
+		    && find_long_option (cvt->parser->long_opts, opt->name) < 0)
+		  /* OPT can be used as a long option.  */
+		  {
+		    cvt->long_end->name = opt->name;
+		    cvt->long_end->has_arg =
+		      (real->arg
+		       ? (real->flags & OPTION_ARG_OPTIONAL
+			  ? optional_argument
+			  : required_argument)
+		       : no_argument);
+		    cvt->long_end->flag = 0;
+		    /* we add a disambiguating code to all the user's
+		       values (which is removed before we actually call
+		       the function to parse the value); this means that
+		       the user loses use of the high 8 bits in all his
+		       values (the sign of the lower bits is preserved
+		       however)...  */
+		    cvt->long_end->val =
+		      ((opt->key | real->key) & USER_MASK)
+		      + (((group - cvt->parser->groups) + 1) << USER_BITS);
+
+		    /* Keep the LONG_OPTS list terminated.  */
+		    (++cvt->long_end)->name = NULL;
+		  }
+	      }
+	    }
+
+      group->parser = argp->parser;
+      group->argp = argp;
+      group->short_end = cvt->short_end;
+      group->args_processed = 0;
+      group->parent = parent;
+      group->parent_index = parent_index;
+      group->input = 0;
+      group->hook = 0;
+      group->child_inputs = 0;
+
+      if (children)
+	/* Assign GROUP's CHILD_INPUTS field some space from
+           CVT->child_inputs_end.*/
+	{
+	  unsigned num_children = 0;
+	  while (children[num_children].argp)
+	    num_children++;
+	  group->child_inputs = cvt->child_inputs_end;
+	  cvt->child_inputs_end += num_children;
+	}
+
+      parent = group++;
+    }
+  else
+    parent = 0;
+
+  if (children)
+    {
+      unsigned index = 0;
+      while (children->argp)
+	group =
+	  convert_options (children++->argp, parent, index++, group, cvt);
+    }
+
+  return group;
+}
+
+/* Find the merged set of getopt options, with keys appropiately prefixed. */
+static void
+parser_convert (struct parser *parser, const struct argp *argp, int flags)
+{
+  struct parser_convert_state cvt;
+
+  cvt.parser = parser;
+  cvt.short_end = parser->short_opts;
+  cvt.long_end = parser->long_opts;
+  cvt.child_inputs_end = parser->child_inputs;
+
+  if (flags & ARGP_IN_ORDER)
+    *cvt.short_end++ = '-';
+  else if (flags & ARGP_NO_ARGS)
+    *cvt.short_end++ = '+';
+  *cvt.short_end = '\0';
+
+  cvt.long_end->name = NULL;
+
+  parser->argp = argp;
+
+  if (argp)
+    parser->egroup = convert_options (argp, 0, 0, parser->groups, &cvt);
+  else
+    parser->egroup = parser->groups; /* No parsers at all! */
+}
+
+/* Lengths of various parser fields which we will allocated.  */
+struct parser_sizes
+{
+  size_t short_len;		/* Getopt short options string.  */
+  size_t long_len;		/* Getopt long options vector.  */
+  size_t num_groups;		/* Group structures we allocate.  */
+  size_t num_child_inputs;	/* Child input slots.  */
+};
+
+/* For ARGP, increments the NUM_GROUPS field in SZS by the total number of
+ argp structures descended from it, and the SHORT_LEN & LONG_LEN fields by
+ the maximum lengths of the resulting merged getopt short options string and
+ long-options array, respectively.  */
+static void
+calc_sizes (const struct argp *argp,  struct parser_sizes *szs)
+{
+  const struct argp_child *child = argp->children;
+  const struct argp_option *opt = argp->options;
+
+  if (opt || argp->parser)
+    {
+      szs->num_groups++;
+      if (opt)
+	{
+	  int num_opts = 0;
+	  while (!__option_is_end (opt++))
+	    num_opts++;
+	  szs->short_len += num_opts * 3; /* opt + up to 2 `:'s */
+	  szs->long_len += num_opts;
+	}
+    }
+
+  if (child)
+    while (child->argp)
+      {
+	calc_sizes ((child++)->argp, szs);
+	szs->num_child_inputs++;
+      }
+}
+
+/* Initializes PARSER to parse ARGP in a manner described by FLAGS.  */
+static error_t
+parser_init (struct parser *parser, const struct argp *argp,
+	     int argc, char **argv, int flags, void *input)
+{
+  error_t err = 0;
+  struct group *group;
+  struct parser_sizes szs;
+
+  szs.short_len = (flags & ARGP_NO_ARGS) ? 0 : 1;
+  szs.long_len = 0;
+  szs.num_groups = 0;
+  szs.num_child_inputs = 0;
+
+  if (argp)
+    calc_sizes (argp, &szs);
+
+  /* Lengths of the various bits of storage used by PARSER.  */
+#define GLEN (szs.num_groups + 1) * sizeof (struct group)
+#define CLEN (szs.num_child_inputs * sizeof (void *))
+#define LLEN ((szs.long_len + 1) * sizeof (struct option))
+#define SLEN (szs.short_len + 1)
+
+  parser->storage = malloc (GLEN + CLEN + LLEN + SLEN);
+  if (! parser->storage)
+    return ENOMEM;
+
+  parser->groups = parser->storage;
+  parser->child_inputs = parser->storage + GLEN;
+  parser->long_opts = parser->storage + GLEN + CLEN;
+  parser->short_opts = parser->storage + GLEN + CLEN + LLEN;
+
+  memset (parser->child_inputs, 0, szs.num_child_inputs * sizeof (void *));
+  parser_convert (parser, argp, flags);
+
+  memset (&parser->state, 0, sizeof (struct argp_state));
+  parser->state.argp = parser->argp;
+  parser->state.argc = argc;
+  parser->state.argv = argv;
+  parser->state.flags = flags;
+  parser->state.err_stream = stderr;
+  parser->state.out_stream = stdout;
+  parser->state.next = 0;	/* Tell getopt to initialize.  */
+  parser->state.pstate = parser;
+
+  parser->try_getopt = 1;
+
+  /* Call each parser for the first time, giving it a chance to propagate
+     values to child parsers.  */
+  if (parser->groups < parser->egroup)
+    parser->groups->input = input;
+  for (group = parser->groups;
+       group < parser->egroup && (!err || err == EBADKEY);
+       group++)
+    {
+      if (group->parent)
+	/* If a child parser, get the initial input value from the parent. */
+	group->input = group->parent->child_inputs[group->parent_index];
+      err = group_parse (group, &parser->state, ARGP_KEY_INIT, 0);
+    }
+  if (err == EBADKEY)
+    err = 0;			/* Some parser didn't understand.  */
+
+  if (err)
+    return err;
+
+  /* Getopt is (currently) non-reentrant.  */
+  LOCK_GETOPT;
+
+  if (parser->state.flags & ARGP_NO_ERRS)
+    {
+      opterr = 0;
+      if (parser->state.flags & ARGP_PARSE_ARGV0)
+	/* getopt always skips ARGV[0], so we have to fake it out.  As long
+	   as OPTERR is 0, then it shouldn't actually try to access it.  */
+	parser->state.argv--, parser->state.argc++;
+    }
+  else
+    opterr = 1;		/* Print error messages.  */
+
+  if (parser->state.argv == argv && argv[0])
+    /* There's an argv[0]; use it for messages.  */
+    {
+      char *short_name = strrchr (argv[0], '/');
+      parser->state.name = short_name ? short_name + 1 : argv[0];
+    }
+  else
+    parser->state.name = program_invocation_short_name;
+
+  return 0;
+}
+
+/* Free any storage consumed by PARSER (but not PARSER itself).  */
+static error_t
+parser_finalize (struct parser *parser,
+		 error_t err, int arg_ebadkey, int *end_index)
+{
+  struct group *group;
+
+  UNLOCK_GETOPT;
+
+  if (err == EBADKEY && arg_ebadkey)
+    /* Suppress errors generated by unparsed arguments.  */
+    err = 0;
+
+  if (! err)
+    if (parser->state.next == parser->state.argc)
+      /* We successfully parsed all arguments!  Call all the parsers again,
+	 just a few more times... */
+      {
+	for (group = parser->groups;
+	     group < parser->egroup && (!err || err==EBADKEY);
+	     group++)
+	  if (group->args_processed == 0)
+	    err = group_parse (group, &parser->state, ARGP_KEY_NO_ARGS, 0);
+	for (group = parser->groups;
+	     group < parser->egroup && (!err || err==EBADKEY);
+	     group++)
+	  err = group_parse (group, &parser->state, ARGP_KEY_END, 0);
+
+	if (err == EBADKEY)
+	  err = 0;		/* Some parser didn't understand.  */
+
+	/* Tell the user that all arguments are parsed.  */
+	if (end_index)
+	  *end_index = parser->state.next;
+      }
+    else if (end_index)
+      /* Return any remaining arguments to the user.  */
+      *end_index = parser->state.next;
+    else
+      /* No way to return the remaining arguments, they must be bogus. */
+      {
+	if (!(parser->state.flags & ARGP_NO_ERRS) && parser->state.err_stream)
+	  fprintf (parser->state.err_stream,
+		   _("%s: Too many arguments\n"), parser->state.name);
+	err = EBADKEY;
+      }
+
+  /* Okay, we're all done, with either an error or success.  We only call the
+     parsers once more, to indicate which one.  */
+
+  if (err)
+    {
+      /* Maybe print an error message.  */
+      if (err == EBADKEY)
+	/* An appropriate message describing what the error was should have
+	   been printed earlier.  */
+	__argp_state_help (&parser->state, parser->state.err_stream,
+			   ARGP_HELP_STD_ERR);
+
+      /* Since we didn't exit, give each parser an error indication.  */
+      for (group = parser->groups; group < parser->egroup; group++)
+	group_parse (group, &parser->state, ARGP_KEY_ERROR, 0);
+    }
+  else
+    /* Do final cleanup, including propagating back values from parsers.  */
+    {
+      /* We pass over the groups in reverse order so that child groups are
+	 given a chance to do there processing before passing back a value to
+	 the parent.  */
+      for (group = parser->egroup - 1
+	   ; group >= parser->groups && (!err || err == EBADKEY)
+	   ; group--)
+	err = group_parse (group, &parser->state, ARGP_KEY_SUCCESS, 0);
+      if (err == EBADKEY)
+	err = 0;		/* Some parser didn't understand.  */
+    }
+
+  if (err == EBADKEY)
+    err = EINVAL;
+
+  free (parser->storage);
+
+  return err;
+}
+
+/* Call the user parsers to parse the non-option argument VAL, at the current
+   position, returning any error.  */
+static error_t
+parser_parse_arg (struct parser *parser, char *val)
+{
+  int index = parser->state.next;
+  error_t err = EBADKEY;
+  struct group *group;
+
+  for (group = parser->groups
+       ; group < parser->egroup && err == EBADKEY
+       ; group++)
+    err = group_parse (group, &parser->state, ARGP_KEY_ARG, val);
+
+  if (!err)
+    if (parser->state.next >= index)
+      /* Remember that we successfully processed a non-option
+	 argument -- but only if the user hasn't gotten tricky and set
+	 the clock back.  */
+      (--group)->args_processed++;
+    else
+      /* The user wants to reparse some args, give getopt another try.  */
+      parser->try_getopt = 1;
+
+  return err;
+}
+
+/* Call the user parsers to parse the option OPT, with argument VAL, at the
+   current position, returning any error.  */
+static error_t
+parser_parse_opt (struct parser *parser, int opt, char *val)
+{
+  /* The group key encoded in the high bits; 0 for short opts or
+     group_number + 1 for long opts.  */
+  int group_key = opt >> USER_BITS;
+
+  if (group_key == 0)
+    /* A short option.  By comparing OPT's position in SHORT_OPTS to the
+       various starting positions in each group's SHORT_END field, we can
+       determine which group OPT came from.  */
+    {
+      struct group *group;
+      char *short_index = strchr (parser->short_opts, opt);
+
+      if (short_index)
+	for (group = parser->groups; group < parser->egroup; group++)
+	  if (group->short_end > short_index)
+	    return group_parse (group, &parser->state, opt, optarg);
+
+      return EBADKEY;		/* until otherwise asserted */
+    }
+  else
+    /* A long option.  We use shifts instead of masking for extracting
+       the user value in order to preserve the sign.  */
+    return
+      group_parse (&parser->groups[group_key - 1], &parser->state,
+		   (opt << GROUP_BITS) >> GROUP_BITS, optarg);
+}
+
+/* Parse the next argument in PARSER (as indicated by PARSER->state.next).
+   Any error from the parsers is returned, and *ARGP_EBADKEY indicates
+   whether a value of EBADKEY is due to an unrecognized argument (which is
+   generally not fatal).  */
+static error_t
+parser_parse_next (struct parser *parser, int *arg_ebadkey)
+{
+  int opt;
+  error_t err = 0;
+
+  if (parser->state.quoted && parser->state.next < parser->state.quoted)
+    /* The next argument pointer has been moved to before the quoted
+       region, so pretend we never saw the quoting `--', and give getopt
+       another chance.  If the user hasn't removed it, getopt will just
+       process it again.  */
+    parser->state.quoted = 0;
+
+  if (parser->try_getopt && !parser->state.quoted)
+    /* Give getopt a chance to parse this.  */
+    {
+      optind = parser->state.next; /* Put it back in OPTIND for getopt.  */
+      optopt = KEY_END;	/* Distinguish KEY_ERR from a real option.  */
+      if (parser->state.flags & ARGP_LONG_ONLY)
+	opt = getopt_long_only (parser->state.argc, parser->state.argv,
+				parser->short_opts, parser->long_opts, 0);
+      else
+	opt = getopt_long (parser->state.argc, parser->state.argv,
+			   parser->short_opts, parser->long_opts, 0);
+      parser->state.next = optind; /* And see what getopt did.  */
+
+      if (opt == KEY_END)
+	/* Getopt says there are no more options, so stop using
+	   getopt; we'll continue if necessary on our own.  */
+	{
+	  parser->try_getopt = 0;
+	  if (parser->state.next > 1
+	      && strcmp (parser->state.argv[parser->state.next - 1], QUOTE)
+	           == 0)
+	    /* Not only is this the end of the options, but it's a
+	       `quoted' region, which may have args that *look* like
+	       options, so we definitely shouldn't try to use getopt past
+	       here, whatever happens.  */
+	    parser->state.quoted = parser->state.next;
+	}
+      else if (opt == KEY_ERR && optopt != KEY_END)
+	/* KEY_ERR can have the same value as a valid user short
+	   option, but in the case of a real error, getopt sets OPTOPT
+	   to the offending character, which can never be KEY_END.  */
+	{
+	  *arg_ebadkey = 0;
+	  return EBADKEY;
+	}
+    }
+  else
+    opt = KEY_END;
+
+  if (opt == KEY_END)
+    /* We're past what getopt considers the options.  */
+    if (parser->state.next >= parser->state.argc
+	|| (parser->state.flags & ARGP_NO_ARGS))
+      /* Indicate that we're done.  */
+      {
+	*arg_ebadkey = 1;
+	return EBADKEY;
+      }
+    else
+      /* A non-option arg.  */
+      err =
+	parser_parse_arg (parser, parser->state.argv[parser->state.next++]);
+  else if (opt == KEY_ARG)
+    /* A non-option argument; try each parser in turn.  */
+    err = parser_parse_arg (parser, optarg);
+  else
+    err = parser_parse_opt (parser, opt, optarg);
+
+  if (err == EBADKEY)
+    {
+      *arg_ebadkey = (opt == KEY_END || opt == KEY_ARG);
+      parser->state.next--;	/* Put back the unused argument.  */
+    }
+
+  return err;
+}
+
+/* Parse the options strings in ARGC & ARGV according to the argp in ARGP.
+   FLAGS is one of the ARGP_ flags above.  If END_INDEX is non-NULL, the
+   index in ARGV of the first unparsed option is returned in it.  If an
+   unknown option is present, EINVAL is returned; if some parser routine
+   returned a non-zero value, it is returned; otherwise 0 is returned.  */
+error_t
+__argp_parse (const struct argp *argp, int argc, char **argv, unsigned flags,
+	      int *end_index, void *input)
+{
+  error_t err;
+  struct parser parser;
+
+  /* If true, then err == EBADKEY is a result of a non-option argument failing
+     to be parsed (which in some cases isn't actually an error).  */
+  int arg_ebadkey = 0;
+
+  if (! (flags & ARGP_NO_HELP))
+    /* Add our own options.  */
+    {
+      struct argp_child *child = alloca (4 * sizeof (struct argp_child));
+      struct argp *top_argp = alloca (sizeof (struct argp));
+
+      /* TOP_ARGP has no options, it just serves to group the user & default
+	 argps.  */
+      memset (top_argp, 0, sizeof (*top_argp));
+      top_argp->children = child;
+
+      memset (child, 0, 4 * sizeof (struct argp_child));
+
+      if (argp)
+	(child++)->argp = argp;
+      (child++)->argp = &argp_default_argp;
+      if (argp_program_version || argp_program_version_hook)
+	(child++)->argp = &argp_version_argp;
+      child->argp = 0;
+
+      argp = top_argp;
+    }
+
+  /* Construct a parser for these arguments.  */
+  err = parser_init (&parser, argp, argc, argv, flags, input);
+
+  if (! err)
+    /* Parse! */
+    {
+      while (! err)
+	err = parser_parse_next (&parser, &arg_ebadkey);
+      err = parser_finalize (&parser, err, arg_ebadkey, end_index);
+    }
+
+  return err;
+}
+#ifdef weak_alias
+weak_alias (__argp_parse, argp_parse)
+#endif
+
+/* Return the input field for ARGP in the parser corresponding to STATE; used
+   by the help routines.  */
+void *
+__argp_input (const struct argp *argp, const struct argp_state *state)
+{
+  if (state)
+    {
+      struct group *group;
+      struct parser *parser = state->pstate;
+
+      for (group = parser->groups; group < parser->egroup; group++)
+	if (group->argp == argp)
+	  return group->input;
+    }
+
+  return 0;
+}
+#ifdef weak_alias
+weak_alias (__argp_input, _argp_input)
+#endif

argp/argp-pv.c

@@ -0,0 +1,25 @@
+/* Default definition for ARGP_PROGRAM_VERSION.
+   Copyright (C) 1996, 1997 Free Software Foundation, Inc.
+   This file is part of the GNU C Library.
+   Written by Miles Bader <miles@gnu.ai.mit.edu>.
+
+   The GNU C Library is free software; you can redistribute it and/or
+   modify it under the terms of the GNU Library General Public License as
+   published by the Free Software Foundation; either version 2 of the
+   License, or (at your option) any later version.
+
+   The GNU C Library is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+   Library General Public License for more details.
+
+   You should have received a copy of the GNU Library General Public
+   License along with the GNU C Library; see the file COPYING.LIB.  If not,
+   write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+   Boston, MA 02111-1307, USA.  */
+
+/* If set by the user program to a non-zero value, then a default option
+   --version is added (unless the ARGP_NO_HELP flag is used), which will
+   print this this string followed by a newline and exit (unless the
+   ARGP_NO_EXIT flag is used).  Overridden by ARGP_PROGRAM_VERSION_HOOK.  */
+const char *argp_program_version = 0;

argp/argp-pvh.c

@@ -0,0 +1,32 @@
+/* Default definition for ARGP_PROGRAM_VERSION_HOOK.
+   Copyright (C) 1996, 1997 Free Software Foundation, Inc.
+   This file is part of the GNU C Library.
+   Written by Miles Bader <miles@gnu.ai.mit.edu>.
+
+   The GNU C Library is free software; you can redistribute it and/or
+   modify it under the terms of the GNU Library General Public License as
+   published by the Free Software Foundation; either version 2 of the
+   License, or (at your option) any later version.
+
+   The GNU C Library is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+   Library General Public License for more details.
+
+   You should have received a copy of the GNU Library General Public
+   License along with the GNU C Library; see the file COPYING.LIB.  If not,
+   write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+   Boston, MA 02111-1307, USA.  */
+
+#ifdef HAVE_CONFIG_H
+#include <config.h>
+#endif
+
+#include "argp.h"
+
+/* If set by the user program to a non-zero value, then a default option
+   --version is added (unless the ARGP_NO_HELP flag is used), which calls
+   this function with a stream to print the version to and a pointer to the
+   current parsing state, and then exits (unless the ARGP_NO_EXIT flag is
+   used).  This variable takes precedent over ARGP_PROGRAM_VERSION.  */
+void (*argp_program_version_hook) (FILE *stream, struct argp_state *state) = 0;

argp/argp-test.c

@@ -0,0 +1,209 @@
+/* Test program for argp argument parser
+   Copyright (C) 1997 Free Software Foundation, Inc.
+   This file is part of the GNU C Library.
+   Written by Miles Bader <miles@gnu.ai.mit.edu>.
+
+   The GNU C Library is free software; you can redistribute it and/or
+   modify it under the terms of the GNU Library General Public License as
+   published by the Free Software Foundation; either version 2 of the
+   License, or (at your option) any later version.
+
+   The GNU C Library is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+   Library General Public License for more details.
+
+   You should have received a copy of the GNU Library General Public
+   License along with the GNU C Library; see the file COPYING.LIB.  If not,
+   write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+   Boston, MA 02111-1307, USA.  */
+
+#ifdef HAVE_CONFIG_H
+#include <config.h>
+#endif
+
+#include <stdlib.h>
+#include <time.h>
+#include <string.h>
+#include <argp.h>
+
+const char *argp_program_version = "argp-test 1.0";
+
+struct argp_option sub_options[] =
+{
+  {"subopt1",       's',     0,  0, "Nested option 1"},
+  {"subopt2",       'S',     0,  0, "Nested option 2"},
+
+  { 0, 0, 0, 0, "Some more nested options:", 10},
+  {"subopt3",       'p',     0,  0, "Nested option 3"},
+
+  {"subopt4",       'q',     0,  0, "Nested option 4", 1},
+
+  {0}
+};
+
+static const char sub_args_doc[] = "STRING...\n-";
+static const char sub_doc[] = "\vThis is the doc string from the sub-arg-parser.";
+
+static error_t
+sub_parse_opt (int key, char *arg, struct argp_state *state)
+{
+  switch (key)
+    {
+    case ARGP_KEY_NO_ARGS:
+      printf ("NO SUB ARGS\n");
+      break;
+    case ARGP_KEY_ARG:
+      printf ("SUB ARG: %s\n", arg);
+      break;
+
+    case 's' : case 'S': case 'p': case 'q':
+      printf ("SUB KEY %c\n", key);
+      break;
+
+    default:
+      return ARGP_ERR_UNKNOWN;
+    }
+  return 0;
+}
+
+static char *
+sub_help_filter (int key, const char *text, void *input)
+{
+  if (key == ARGP_KEY_HELP_EXTRA)
+    return strdup ("This is some extra text from the sub parser (note that it \
+is preceded by a blank line).");
+  else
+    return (char *)text;
+}
+
+static struct argp sub_argp = {
+  sub_options, sub_parse_opt, sub_args_doc, sub_doc, 0, sub_help_filter
+};
+
+/* Structure used to communicate with the parsing functions.  */
+struct params
+{
+  unsigned foonly;		/* Value parsed for foonly.  */
+  unsigned foonly_default;	/* Default value for it.  */
+};
+
+#define OPT_PGRP 1
+#define OPT_SESS 2
+
+struct argp_option options[] =
+{
+  {"pid",       'p',     "PID", 0, "List the process PID"},
+  {"pgrp",      OPT_PGRP,"PGRP",0, "List processes in the process group PGRP"},
+  {"no-parent", 'P',	 0,     0, "Include processes without parents"},
+  {0,           'x',     0,     OPTION_ALIAS},
+  {"all-fields",'Q',     0,     0, "Don't elide unusable fields (normally"
+				   " if there's some reason ps can't"
+				   " print a field for any process, it's"
+				   " removed from the output entirely)" },
+  {"reverse",   'r',    0,      0, "Reverse the order of any sort"},
+  {"gratuitously-long-reverse-option", 0, 0, OPTION_ALIAS},
+  {"session",  OPT_SESS,"SID",  OPTION_ARG_OPTIONAL,
+				   "Add the processes from the session"
+				   " SID (which defaults to the sid of"
+				   " the current process)" },
+
+  {0,0,0,0, "Here are some more options:"},
+  {"foonly", 'f', "ZOT", OPTION_ARG_OPTIONAL, "Glork a foonly"},
+  {"zaza", 'z', 0, 0, "Snit a zar"},
+
+  {0}
+};
+
+static const char args_doc[] = "STRING";
+static const char doc[] = "Test program for argp."
+ "\vThis doc string comes after the options."
+ "\nHey!  Some manual formatting!"
+ "\nThe current time is: %s";
+
+static void
+popt (int key, char *arg)
+{
+  char buf[10];
+  if (isprint (key))
+    sprintf (buf, "%c", key);
+  else
+    sprintf (buf, "%d", key);
+  if (arg)
+    printf ("KEY %s: %s\n", buf, arg);
+  else
+    printf ("KEY %s\n", buf);
+}
+
+static error_t
+parse_opt (int key, char *arg, struct argp_state *state)
+{
+  struct params *params = state->input;
+
+  switch (key)
+    {
+    case ARGP_KEY_NO_ARGS:
+      printf ("NO ARGS\n");
+      break;
+
+    case ARGP_KEY_ARG:
+      if (state->arg_num > 0)
+	return ARGP_ERR_UNKNOWN; /* Leave it for the sub-arg parser.  */
+      printf ("ARG: %s\n", arg);
+      break;
+
+    case 'f':
+      if (arg)
+	params->foonly = atoi (arg);
+      else
+	params->foonly = params->foonly_default;
+      popt (key, arg);
+      break;
+
+    case 'p': case 'P': case OPT_PGRP: case 'x': case 'Q':
+    case 'r': case OPT_SESS: case 'z':
+      popt (key, arg);
+      break;
+
+    default:
+      return ARGP_ERR_UNKNOWN;
+    }
+  return 0;
+}
+
+static char *
+help_filter (int key, const char *text, void *input)
+{
+  char *new_text;
+  struct params *params = input;
+
+  if (key == ARGP_KEY_HELP_POST_DOC && text)
+    {
+      time_t now = time (0);
+      asprintf (&new_text, text, ctime (&now));
+    }
+  else if (key == 'f')
+    /* Show the default for the --foonly option.  */
+    asprintf (&new_text, "%s (ZOT defaults to %x)",
+	      text, params->foonly_default);
+  else
+    new_text = (char *)text;
+
+  return new_text;
+}
+
+static struct argp_child argp_children[] = { { &sub_argp }, { 0 } };
+static struct argp argp = {
+  options, parse_opt, args_doc, doc, argp_children, help_filter
+};
+
+int
+main (int argc, char **argv)
+{
+  struct params params;
+  params.foonly = 0;
+  params.foonly_default = random ();
+  argp_parse (&argp, argc, argv, 0, 0, &params);
+  printf ("After parsing: foonly = %x\n", params.foonly);
+  return 0;
+}

argp/argp-xinl.c

@@ -0,0 +1,37 @@
+/* Real definitions for extern inline functions in argp.h
+   Copyright (C) 1997 Free Software Foundation, Inc.
+   This file is part of the GNU C Library.
+   Written by Miles Bader <miles@gnu.ai.mit.edu>.
+
+   The GNU C Library is free software; you can redistribute it and/or
+   modify it under the terms of the GNU Library General Public License as
+   published by the Free Software Foundation; either version 2 of the
+   License, or (at your option) any later version.
+
+   The GNU C Library is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+   Library General Public License for more details.
+
+   You should have received a copy of the GNU Library General Public
+   License along with the GNU C Library; see the file COPYING.LIB.  If not,
+   write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+   Boston, MA 02111-1307, USA.  */
+
+#ifdef HAVE_CONFIG_H
+#include <config.h>
+#endif
+
+#define ARGP_EI
+#undef __OPTIMIZE__
+#define __OPTIMIZE__
+#include "argp.h"
+
+/* Add weak aliases.  */
+#if _LIBC - 0 && defined (weak_alias)
+
+weak_alias (__argp_usage, argp_usage)
+weak_alias (__option_is_short, _option_is_short)
+weak_alias (__option_is_end, _option_is_end)
+
+#endif

argp/argp.h

@@ -0,0 +1,551 @@
+/* Hierarchial argument parsing, layered over getopt.
+   Copyright (C) 1995, 1996, 1997 Free Software Foundation, Inc.
+   This file is part of the GNU C Library.
+   Written by Miles Bader <miles@gnu.ai.mit.edu>.
+
+   The GNU C Library is free software; you can redistribute it and/or
+   modify it under the terms of the GNU Library General Public License as
+   published by the Free Software Foundation; either version 2 of the
+   License, or (at your option) any later version.
+
+   The GNU C Library is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+   Library General Public License for more details.
+
+   You should have received a copy of the GNU Library General Public
+   License along with the GNU C Library; see the file COPYING.LIB.  If not,
+   write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+   Boston, MA 02111-1307, USA.  */
+
+#ifndef __ARGP_H__
+#define __ARGP_H__
+
+#include <stdio.h>
+#include <ctype.h>
+#include <getopt.h>
+
+#define __need_error_t
+#include <errno.h>
+
+#ifndef __const
+#define __const const
+#endif
+
+#ifndef __error_t_defined
+typedef int error_t;
+#endif
+
+#ifndef __P
+# if (defined (__STDC__) && __STDC__) || defined (__cplusplus)
+#  define __P(args)	args
+# else
+#  define __P(args)	()
+# endif
+#endif
+
+#ifdef  __cplusplus
+extern "C" {
+#endif
+
+/* A description of a particular option.  A pointer to an array of
+   these is passed in the OPTIONS field of an argp structure.  Each option
+   entry can correspond to one long option and/or one short option; more
+   names for the same option can be added by following an entry in an option
+   array with options having the OPTION_ALIAS flag set.  */
+struct argp_option
+{
+  /* The long option name.  For more than one name for the same option, you
+     can use following options with the OPTION_ALIAS flag set.  */
+  __const char *name;
+
+  /* What key is returned for this option.  If > 0 and printable, then it's
+     also accepted as a short option.  */
+  int key;
+
+  /* If non-NULL, this is the name of the argument associated with this
+     option, which is required unless the OPTION_ARG_OPTIONAL flag is set. */
+  __const char *arg;
+
+  /* OPTION_ flags.  */
+  int flags;
+
+  /* The doc string for this option.  If both NAME and KEY are 0, This string
+     will be printed outdented from the normal option column, making it
+     useful as a group header (it will be the first thing printed in its
+     group); in this usage, it's conventional to end the string with a `:'.  */
+  __const char *doc;
+
+  /* The group this option is in.  In a long help message, options are sorted
+     alphabetically within each group, and the groups presented in the order
+     0, 1, 2, ..., n, -m, ..., -2, -1.  Every entry in an options array with
+     if this field 0 will inherit the group number of the previous entry, or
+     zero if it's the first one, unless its a group header (NAME and KEY both
+     0), in which case, the previous entry + 1 is the default.  Automagic
+     options such as --help are put into group -1.  */
+  int group;
+};
+
+/* The argument associated with this option is optional.  */
+#define OPTION_ARG_OPTIONAL	0x1
+
+/* This option isn't displayed in any help messages.  */
+#define OPTION_HIDDEN	       	0x2
+
+/* This option is an alias for the closest previous non-alias option.  This
+   means that it will be displayed in the same help entry, and will inherit
+   fields other than NAME and KEY from the aliased option.  */
+#define OPTION_ALIAS		0x4
+
+/* This option isn't actually an option (and so should be ignored by the
+   actual option parser), but rather an arbitrary piece of documentation that
+   should be displayed in much the same manner as the options.  If this flag
+   is set, then the option NAME field is displayed unmodified (e.g., no `--'
+   prefix is added) at the left-margin (where a *short* option would normally
+   be displayed), and the documentation string in the normal place.  For
+   purposes of sorting, any leading whitespace and puncuation is ignored,
+   except that if the first non-whitespace character is not `-', this entry
+   is displayed after all options (and OPTION_DOC entries with a leading `-')
+   in the same group.  */
+#define OPTION_DOC		0x8
+
+/* This option shouldn't be included in `long' usage messages (but is still
+   included in help messages).  This is mainly intended for options that are
+   completely documented in an argp's ARGS_DOC field, in which case including
+   the option in the generic usage list would be redundant.  For instance,
+   if ARGS_DOC is "FOO BAR\n-x BLAH", and the `-x' option's purpose is to
+   distinguish these two cases, -x should probably be marked
+   OPTION_NO_USAGE.  */
+#define OPTION_NO_USAGE		0x10
+
+struct argp;			/* fwd declare this type */
+struct argp_state;		/* " */
+struct argp_child;		/* " */
+
+/* The type of a pointer to an argp parsing function.  */
+typedef error_t (*argp_parser_t)(int key, char *arg, struct argp_state *state);
+
+/* What to return for unrecognized keys.  For special ARGP_KEY_ keys, such
+   returns will simply be ignored.  For user keys, this error will be turned
+   into EINVAL (if the call to argp_parse is such that errors are propagated
+   back to the user instead of exiting); returning EINVAL itself would result
+   in an immediate stop to parsing in *all* cases.  */
+#define ARGP_ERR_UNKNOWN	E2BIG /* Hurd should never need E2BIG.  XXX */
+
+/* Special values for the KEY argument to an argument parsing function.
+   ARGP_ERR_UNKNOWN should be returned if they aren't understood.
+
+   The sequence of keys to a parsing function is either (where each
+   uppercased word should be prefixed by `ARGP_KEY_' and opt is a user key):
+
+       INIT opt... NO_ARGS END SUCCESS  -- No non-option arguments at all
+   or  INIT (opt | ARG)... END SUCCESS  -- All non-option args parsed
+   or  INIT (opt | ARG)... SUCCESS      -- Some non-option arg unrecognized
+
+   The third case is where every parser returned ARGP_KEY_UNKNOWN for an
+   argument, in which case parsing stops at that argument (returning the
+   unparsed arguments to the caller of argp_parse if requested, or stopping
+   with an error message if not).
+
+   If an error occurs (either detected by argp, or because the parsing
+   function returned an error value), then the parser is called with
+   ARGP_KEY_ERROR, and no further calls are made.  */
+
+/* This is not an option at all, but rather a command line argument.  If a
+   parser receiving this key returns success, the fact is recorded, and the
+   ARGP_KEY_NO_ARGS case won't be used.  HOWEVER, if while processing the
+   argument, a parser function decrements the NEXT field of the state it's
+   passed, the option won't be considered processed; this is to allow you to
+   actually modify the argument (perhaps into an option), and have it
+   processed again.  */
+#define ARGP_KEY_ARG		0
+/* There are no more command line arguments at all.  */
+#define ARGP_KEY_END		0x1000001
+/* Because it's common to want to do some special processing if there aren't
+   any non-option args, user parsers are called with this key if they didn't
+   successfully process any non-option arguments.  Called just before
+   ARGP_KEY_END (where more general validity checks on previously parsed
+   arguments can take place).  */
+#define ARGP_KEY_NO_ARGS	0x1000002
+/* Passed in before any parsing is done.  Afterwards, the values of each
+   element of the CHILD_INPUT field, if any, in the state structure is
+   copied to each child's state to be the initial value of the INPUT field.  */
+#define ARGP_KEY_INIT		0x1000003
+/* Passed in when parsing has successfully been completed (even if there are
+   still arguments remaining).  */
+#define ARGP_KEY_SUCCESS	0x1000004
+/* Passed in if an error occurs (in which case a call with ARGP_KEY_SUCCESS is
+   never made, so any cleanup must be done here).  */
+#define ARGP_KEY_ERROR		0x1000005
+
+/* An argp structure contains a set of options declarations, a function to
+   deal with parsing one, documentation string, a possible vector of child
+   argp's, and perhaps a function to filter help output.  When actually
+   parsing options, getopt is called with the union of all the argp
+   structures chained together through their CHILD pointers, with conflicts
+   being resolved in favor of the first occurance in the chain.  */
+struct argp
+{
+  /* An array of argp_option structures, terminated by an entry with both
+     NAME and KEY having a value of 0.  */
+  __const struct argp_option *options;
+
+  /* What to do with an option from this structure.  KEY is the key
+     associated with the option, and ARG is any associated argument (NULL if
+     none was supplied).  If KEY isn't understood, ARGP_ERR_UNKNOWN should be
+     returned.  If a non-zero, non-ARGP_ERR_UNKNOWN value is returned, then
+     parsing is stopped immediately, and that value is returned from
+     argp_parse().  For special (non-user-supplied) values of KEY, see the
+     ARGP_KEY_ definitions below.  */
+  argp_parser_t parser;
+
+  /* A string describing what other arguments are wanted by this program.  It
+     is only used by argp_usage to print the `Usage:' message.  If it
+     contains newlines, the strings separated by them are considered
+     alternative usage patterns, and printed on separate lines (lines after
+     the first are prefix by `  or: ' instead of `Usage:').  */
+  __const char *args_doc;
+
+  /* If non-NULL, a string containing extra text to be printed before and
+     after the options in a long help message (separated by a vertical tab
+     `\v' character).  */
+  __const char *doc;
+
+  /* A vector of argp_children structures, terminated by a member with a 0
+     argp field, pointing to child argps should be parsed with this one.  Any
+     conflicts are resolved in favor of this argp, or early argps in the
+     CHILDREN list.  This field is useful if you use libraries that supply
+     their own argp structure, which you want to use in conjunction with your
+     own.  */
+  __const struct argp_child *children;
+
+  /* If non-zero, this should be a function to filter the output of help
+     messages.  KEY is either a key from an option, in which case TEXT is
+     that option's help text, or a special key from the ARGP_KEY_HELP_
+     defines, below, describing which other help text TEXT is.  The function
+     should return either TEXT, if it should be used as-is, a replacement
+     string, which should be malloced, and will be freed by argp, or NULL,
+     meaning `print nothing'.  The value for TEXT is *after* any translation
+     has been done, so if any of the replacement text also needs translation,
+     that should be done by the filter function.  INPUT is either the input
+     supplied to argp_parse, or NULL, if argp_help was called directly.  */
+  char *(*help_filter)(int __key, __const char *__text, void *__input);
+};
+
+/* Possible KEY arguments to a help filter function.  */
+#define ARGP_KEY_HELP_PRE_DOC	0x2000001 /* Help text preceeding options. */
+#define ARGP_KEY_HELP_POST_DOC	0x2000002 /* Help text following options. */
+#define ARGP_KEY_HELP_HEADER	0x2000003 /* Option header string. */
+#define ARGP_KEY_HELP_EXTRA	0x2000004 /* After all other documentation;
+					     TEXT is NULL for this key.  */
+/* Explanatory note emitted when duplicate option arguments have been
+   suppressed.  */
+#define ARGP_KEY_HELP_DUP_ARGS_NOTE 0x2000005
+
+/* When an argp has a non-zero CHILDREN field, it should point to a vector of
+   argp_child structures, each of which describes a subsidiary argp.  */
+struct argp_child
+{
+  /* The child parser.  */
+  __const struct argp *argp;
+
+  /* Flags for this child.  */
+  int flags;
+
+  /* If non-zero, an optional header to be printed in help output before the
+     child options.  As a side-effect, a non-zero value forces the child
+     options to be grouped together; to achieve this effect without actually
+     printing a header string, use a value of "".  */
+  __const char *header;
+
+  /* Where to group the child options relative to the other (`consolidated')
+     options in the parent argp; the values are the same as the GROUP field
+     in argp_option structs, but all child-groupings follow parent options at
+     a particular group level.  If both this field and HEADER are zero, then
+     they aren't grouped at all, but rather merged with the parent options
+     (merging the child's grouping levels with the parents).  */
+  int group;
+};
+
+/* Parsing state.  This is provided to parsing functions called by argp,
+   which may examine and, as noted, modify fields.  */
+struct argp_state
+{
+  /* The top level ARGP being parsed.  */
+  __const struct argp *argp;
+
+  /* The argument vector being parsed.  May be modified.  */
+  int argc;
+  char **argv;
+
+  /* The index in ARGV of the next arg that to be parsed.  May be modified. */
+  int next;
+
+  /* The flags supplied to argp_parse.  May be modified.  */
+  unsigned flags;
+
+  /* While calling a parsing function with a key of ARGP_KEY_ARG, this is the
+     number of the current arg, starting at zero, and incremented after each
+     such call returns.  At all other times, this is the number of such
+     arguments that have been processed.  */
+  unsigned arg_num;
+
+  /* If non-zero, the index in ARGV of the first argument following a special
+     `--' argument (which prevents anything following being interpreted as an
+     option).  Only set once argument parsing has proceeded past this point. */
+  int quoted;
+
+  /* An arbitrary pointer passed in from the user.  */
+  void *input;
+  /* Values to pass to child parsers.  This vector will be the same length as
+     the number of children for the current parser.  */
+  void **child_inputs;
+
+  /* For the parser's use.  Initialized to 0.  */
+  void *hook;
+
+  /* The name used when printing messages.  This is initialized to ARGV[0],
+     or PROGRAM_INVOCATION_NAME if that is unavailable.  */
+  char *name;
+
+  /* Streams used when argp prints something.  */
+  FILE *err_stream;		/* For errors; initialized to stderr. */
+  FILE *out_stream;		/* For information; initialized to stdout. */
+
+  void *pstate;			/* Private, for use by argp.  */
+};
+
+/* Flags for argp_parse (note that the defaults are those that are
+   convenient for program command line parsing): */
+
+/* Don't ignore the first element of ARGV.  Normally (and always unless
+   ARGP_NO_ERRS is set) the first element of the argument vector is
+   skipped for option parsing purposes, as it corresponds to the program name
+   in a command line.  */
+#define ARGP_PARSE_ARGV0  0x01
+
+/* Don't print error messages for unknown options to stderr; unless this flag
+   is set, ARGP_PARSE_ARGV0 is ignored, as ARGV[0] is used as the program
+   name in the error messages.  This flag implies ARGP_NO_EXIT (on the
+   assumption that silent exiting upon errors is bad behaviour).  */
+#define ARGP_NO_ERRS	0x02
+
+/* Don't parse any non-option args.  Normally non-option args are parsed by
+   calling the parse functions with a key of ARGP_KEY_ARG, and the actual arg
+   as the value.  Since it's impossible to know which parse function wants to
+   handle it, each one is called in turn, until one returns 0 or an error
+   other than ARGP_ERR_UNKNOWN; if an argument is handled by no one, the
+   argp_parse returns prematurely (but with a return value of 0).  If all
+   args have been parsed without error, all parsing functions are called one
+   last time with a key of ARGP_KEY_END.  This flag needn't normally be set,
+   as the normal behavior is to stop parsing as soon as some argument can't
+   be handled.  */
+#define ARGP_NO_ARGS	0x04
+
+/* Parse options and arguments in the same order they occur on the command
+   line -- normally they're rearranged so that all options come first. */
+#define ARGP_IN_ORDER	0x08
+
+/* Don't provide the standard long option --help, which causes usage and
+      option help information to be output to stdout, and exit (0) called. */
+#define ARGP_NO_HELP	0x10
+
+/* Don't exit on errors (they may still result in error messages).  */
+#define ARGP_NO_EXIT	0x20
+
+/* Use the gnu getopt `long-only' rules for parsing arguments.  */
+#define ARGP_LONG_ONLY	0x40
+
+/* Turns off any message-printing/exiting options.  */
+#define ARGP_SILENT    (ARGP_NO_EXIT | ARGP_NO_ERRS | ARGP_NO_HELP)
+
+/* Parse the options strings in ARGC & ARGV according to the options in ARGP.
+   FLAGS is one of the ARGP_ flags above.  If ARG_INDEX is non-NULL, the
+   index in ARGV of the first unparsed option is returned in it.  If an
+   unknown option is present, ARGP_ERR_UNKNOWN is returned; if some parser
+   routine returned a non-zero value, it is returned; otherwise 0 is
+   returned.  This function may also call exit unless the ARGP_NO_HELP flag
+   is set.  INPUT is a pointer to a value to be passed in to the parser.  */
+extern error_t argp_parse __P ((__const struct argp *__argp,
+				int __argc, char **__argv, unsigned __flags,
+				int *__arg_index, void *__input));
+extern error_t __argp_parse __P ((__const struct argp *__argp,
+				  int __argc, char **__argv, unsigned __flags,
+				  int *__arg_index, void *__input));
+
+/* Global variables.  */
+
+/* If defined or set by the user program to a non-zero value, then a default
+   option --version is added (unless the ARGP_NO_HELP flag is used), which
+   will print this string followed by a newline and exit (unless the
+   ARGP_NO_EXIT flag is used).  Overridden by ARGP_PROGRAM_VERSION_HOOK.  */
+extern __const char *argp_program_version;
+
+/* If defined or set by the user program to a non-zero value, then a default
+   option --version is added (unless the ARGP_NO_HELP flag is used), which
+   calls this function with a stream to print the version to and a pointer to
+   the current parsing state, and then exits (unless the ARGP_NO_EXIT flag is
+   used).  This variable takes precedent over ARGP_PROGRAM_VERSION.  */
+extern void (*argp_program_version_hook) __P ((FILE *__stream,
+					       struct argp_state *__state));
+
+/* If defined or set by the user program, it should point to string that is
+   the bug-reporting address for the program.  It will be printed by
+   argp_help if the ARGP_HELP_BUG_ADDR flag is set (as it is by various
+   standard help messages), embedded in a sentence that says something like
+   `Report bugs to ADDR.'.  */
+__const extern char *argp_program_bug_address;
+
+/* The exit status that argp will use when exiting due to a parsing error.
+   If not defined or set by the user program, this defaults to 1.  */
+extern error_t argp_err_exit_status;
+
+/* Flags for argp_help.  */
+#define ARGP_HELP_USAGE		0x01 /* a Usage: message. */
+#define ARGP_HELP_SHORT_USAGE	0x02 /*  " but don't actually print options. */
+#define ARGP_HELP_SEE		0x04 /* a `Try ... for more help' message. */
+#define ARGP_HELP_LONG		0x08 /* a long help message. */
+#define ARGP_HELP_PRE_DOC	0x10 /* doc string preceding long help.  */
+#define ARGP_HELP_POST_DOC	0x20 /* doc string following long help.  */
+#define ARGP_HELP_DOC		(ARGP_HELP_PRE_DOC | ARGP_HELP_POST_DOC)
+#define ARGP_HELP_BUG_ADDR	0x40 /* bug report address */
+#define ARGP_HELP_LONG_ONLY	0x80 /* modify output appropriately to
+					reflect ARGP_LONG_ONLY mode.  */
+
+/* These ARGP_HELP flags are only understood by argp_state_help.  */
+#define ARGP_HELP_EXIT_ERR	0x100 /* Call exit(1) instead of returning.  */
+#define ARGP_HELP_EXIT_OK	0x200 /* Call exit(0) instead of returning.  */
+
+/* The standard thing to do after a program command line parsing error, if an
+   error message has already been printed.  */
+#define ARGP_HELP_STD_ERR \
+  (ARGP_HELP_SEE | ARGP_HELP_EXIT_ERR)
+/* The standard thing to do after a program command line parsing error, if no
+   more specific error message has been printed.  */
+#define ARGP_HELP_STD_USAGE \
+  (ARGP_HELP_SHORT_USAGE | ARGP_HELP_SEE | ARGP_HELP_EXIT_ERR)
+/* The standard thing to do in response to a --help option.  */
+#define ARGP_HELP_STD_HELP \
+  (ARGP_HELP_SHORT_USAGE | ARGP_HELP_LONG | ARGP_HELP_EXIT_OK \
+   | ARGP_HELP_DOC | ARGP_HELP_BUG_ADDR)
+
+/* Output a usage message for ARGP to STREAM.  FLAGS are from the set
+   ARGP_HELP_*.  */
+extern void argp_help __P ((__const struct argp *__argp, FILE *__stream,
+			    unsigned __flags, char *__name));
+extern void __argp_help __P ((__const struct argp *__argp, FILE *__stream,
+			      unsigned __flags, char *__name));
+
+/* The following routines are intended to be called from within an argp
+   parsing routine (thus taking an argp_state structure as the first
+   argument).  They may or may not print an error message and exit, depending
+   on the flags in STATE -- in any case, the caller should be prepared for
+   them *not* to exit, and should return an appropiate error after calling
+   them.  [argp_usage & argp_error should probably be called argp_state_...,
+   but they're used often enough that they should be short]  */
+
+/* Output, if appropriate, a usage message for STATE to STREAM.  FLAGS are
+   from the set ARGP_HELP_*.  */
+extern void argp_state_help __P ((__const struct argp_state *__state,
+				  FILE *__stream, unsigned __flags));
+extern void __argp_state_help __P ((__const struct argp_state *__state,
+				    FILE *__stream, unsigned __flags));
+
+/* Possibly output the standard usage message for ARGP to stderr and exit.  */
+extern void argp_usage __P ((__const struct argp_state *__state));
+extern void __argp_usage __P ((__const struct argp_state *__state));
+
+/* If appropriate, print the printf string FMT and following args, preceded
+   by the program name and `:', to stderr, and followed by a `Try ... --help'
+   message, then exit (1).  */
+extern void argp_error __P ((__const struct argp_state *__state,
+			     __const char *__fmt, ...))
+     __attribute__ ((__format__ (__printf__, 2, 3)));
+extern void __argp_error __P ((__const struct argp_state *__state,
+			       __const char *__fmt, ...))
+     __attribute__ ((__format__ (__printf__, 2, 3)));
+
+/* Similar to the standard gnu error-reporting function error(), but will
+   respect the ARGP_NO_EXIT and ARGP_NO_ERRS flags in STATE, and will print
+   to STATE->err_stream.  This is useful for argument parsing code that is
+   shared between program startup (when exiting is desired) and runtime
+   option parsing (when typically an error code is returned instead).  The
+   difference between this function and argp_error is that the latter is for
+   *parsing errors*, and the former is for other problems that occur during
+   parsing but don't reflect a (syntactic) problem with the input.  */
+extern void argp_failure __P ((__const struct argp_state *__state,
+			       int __status, int __errnum,
+			       __const char *__fmt, ...))
+     __attribute__ ((__format__ (__printf__, 4, 5)));
+extern void __argp_failure __P ((__const struct argp_state *__state,
+				 int __status, int __errnum,
+				 __const char *__fmt, ...))
+     __attribute__ ((__format__ (__printf__, 4, 5)));
+
+/* Returns true if the option OPT is a valid short option.  */
+extern int _option_is_short __P ((__const struct argp_option *__opt));
+extern int __option_is_short __P ((__const struct argp_option *__opt));
+
+/* Returns true if the option OPT is in fact the last (unused) entry in an
+   options array.  */
+extern int _option_is_end __P ((__const struct argp_option *__opt));
+extern int __option_is_end __P ((__const struct argp_option *__opt));
+
+/* Return the input field for ARGP in the parser corresponding to STATE; used
+   by the help routines.  */
+extern void *_argp_input __P ((__const struct argp *argp,
+			       __const struct argp_state *state));
+extern void *__argp_input __P ((__const struct argp *argp,
+				__const struct argp_state *state));
+
+#ifdef __OPTIMIZE__
+
+#if !_LIBC
+# define __argp_usage argp_usage
+# define __argp_state_help argp_state_help
+# define __option_is_short _option_is_short
+# define __option_is_end _option_is_end
+#endif
+
+#ifndef ARGP_EI
+# define ARGP_EI extern inline
+#endif
+
+ARGP_EI void
+__argp_usage (__const struct argp_state *__state)
+{
+  __argp_state_help (__state, stderr, ARGP_HELP_STD_USAGE);
+}
+
+ARGP_EI int
+__option_is_short (__const struct argp_option *__opt)
+{
+  if (__opt->flags & OPTION_DOC)
+    return 0;
+  else
+    {
+      int __key = __opt->key;
+      return __key > 0 && isprint (__key);
+    }
+}
+
+ARGP_EI int
+__option_is_end (__const struct argp_option *__opt)
+{
+  return !__opt->key && !__opt->name && !__opt->doc && !__opt->group;
+}
+
+#if !_LIBC
+# undef __argp_usage
+# undef __argp_state_help
+# undef __option_is_short
+# undef __option_is_end
+#endif
+
+#endif /* __OPTIMIZE__ */
+
+#ifdef  __cplusplus
+}
+#endif
+
+#endif /* __ARGP_H__ */

argz.h

@@ -0,0 +1 @@
+#include <string/argz.h>

assert/.cvsignore

@@ -1,3 +1,4 @@
+*.d *.o *.so *.po *.go stamp.* *.stamp *.ustamp *.udeps
 *.gz *.Z *.tar *.tgz
 =*
 TODO COPYING* AUTHORS copyr-* copying.*

assert/Makefile

@@ -1,4 +1,4 @@
-# Copyright (C) 1991, 1994 Free Software Foundation, Inc.
+# Copyright (C) 1991, 1994, 1997 Free Software Foundation, Inc.
 # This file is part of the GNU C Library.
 
 # The GNU C Library is free software; you can redistribute it and/or
@@ -12,9 +12,9 @@
 # Library General Public License for more details.
 
 # You should have received a copy of the GNU Library General Public
-# License along with the GNU C Library; see the file COPYING.LIB.  If
-# not, write to the Free Software Foundation, Inc., 675 Mass Ave,
-# Cambridge, MA 02139, USA.
+# License along with the GNU C Library; see the file COPYING.LIB.  If not,
+# write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+# Boston, MA 02111-1307, USA.
 
 #
 #	Sub-makefile for assert portion of the library.

assert/assert-perr.c

@@ -1,20 +1,20 @@
-/* Copyright (C) 1994, 1995 Free Software Foundation, Inc.
-This file is part of the GNU C Library.
+/* Copyright (C) 1994, 1995, 1996 Free Software Foundation, Inc.
+   This file is part of the GNU C Library.
 
-The GNU C Library is free software; you can redistribute it and/or
-modify it under the terms of the GNU Library General Public License as
-published by the Free Software Foundation; either version 2 of the
-License, or (at your option) any later version.
+   The GNU C Library is free software; you can redistribute it and/or
+   modify it under the terms of the GNU Library General Public License as
+   published by the Free Software Foundation; either version 2 of the
+   License, or (at your option) any later version.
 
-The GNU C Library is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-Library General Public License for more details.
+   The GNU C Library is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+   Library General Public License for more details.
 
-You should have received a copy of the GNU Library General Public
-License along with the GNU C Library; see the file COPYING.LIB.  If
-not, write to the Free Software Foundation, Inc., 675 Mass Ave,
-Cambridge, MA 02139, USA.  */
+   You should have received a copy of the GNU Library General Public
+   License along with the GNU C Library; see the file COPYING.LIB.  If not,
+   write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+   Boston, MA 02111-1307, USA.  */
 
 #include <assert.h>
 #include <stdio.h>
@@ -38,6 +38,7 @@ __assert_perror_fail (int errnum,
 		      const char *file, unsigned int line,
 		      const char *function)
 {
+  char errbuf[1024];
 #ifdef FATAL_PREPARE
   FATAL_PREPARE;
 #endif
@@ -48,7 +49,7 @@ __assert_perror_fail (int errnum,
 		  __assert_program_name ? ": " : "",
 		  file, line,
 		  function ? function : "", function ? ": " : "",
-		  strerror (errnum));
+		  __strerror_r (errnum, errbuf, sizeof errbuf));
   (void) fflush (stderr);
 
   abort ();

assert/assert.c

@@ -1,29 +1,28 @@
-/* Copyright (C) 1991, 1994, 1995 Free Software Foundation, Inc.
-This file is part of the GNU C Library.
+/* Copyright (C) 1991, 1994, 1995, 1996 Free Software Foundation, Inc.
+   This file is part of the GNU C Library.
 
-The GNU C Library is free software; you can redistribute it and/or
-modify it under the terms of the GNU Library General Public License as
-published by the Free Software Foundation; either version 2 of the
-License, or (at your option) any later version.
+   The GNU C Library is free software; you can redistribute it and/or
+   modify it under the terms of the GNU Library General Public License as
+   published by the Free Software Foundation; either version 2 of the
+   License, or (at your option) any later version.
 
-The GNU C Library is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-Library General Public License for more details.
+   The GNU C Library is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+   Library General Public License for more details.
 
-You should have received a copy of the GNU Library General Public
-License along with the GNU C Library; see the file COPYING.LIB.  If
-not, write to the Free Software Foundation, Inc., 675 Mass Ave,
-Cambridge, MA 02139, USA.  */
+   You should have received a copy of the GNU Library General Public
+   License along with the GNU C Library; see the file COPYING.LIB.  If not,
+   write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+   Boston, MA 02111-1307, USA.  */
 
-#include <ansidecl.h>
 #include <assert.h>
 #include <stdio.h>
 #include <stdlib.h>
 #include <sysdep.h>
 
 
-CONST char *__assert_program_name;
+const char *__assert_program_name;
 
 /* This function, when passed a string containing an asserted
    expression, a filename, and a line number, prints a message
@@ -36,9 +35,8 @@ CONST char *__assert_program_name;
 #endif
 
 void
-DEFUN(__assert_fail, (assertion, file, line, function),
-      CONST char *assertion AND
-      CONST char *file AND unsigned int line AND CONST char *function)
+__assert_fail (const char *assertion, const char *file, unsigned int line,
+	       const char *function)
 {
 #ifdef FATAL_PREPARE
   FATAL_PREPARE;
@@ -61,8 +59,7 @@ DEFUN(__assert_fail, (assertion, file, line, function),
 #include <string.h>
 
 static void
-DEFUN(set_progname, (argc, argv, envp),
-      int argc AND char **argv AND char **envp)
+set_progname (int argc, char **argv, char **envp)
 {
   char *p;
 

assert/assert.h

@@ -1,23 +1,23 @@
-/* Copyright (C) 1991, 1992, 1994, 1995 Free Software Foundation, Inc.
-This file is part of the GNU C Library.
+/* Copyright (C) 1991, 92, 94, 95, 96 Free Software Foundation, Inc.
+   This file is part of the GNU C Library.
 
-The GNU C Library is free software; you can redistribute it and/or
-modify it under the terms of the GNU Library General Public License as
-published by the Free Software Foundation; either version 2 of the
-License, or (at your option) any later version.
+   The GNU C Library is free software; you can redistribute it and/or
+   modify it under the terms of the GNU Library General Public License as
+   published by the Free Software Foundation; either version 2 of the
+   License, or (at your option) any later version.
 
-The GNU C Library is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-Library General Public License for more details.
+   The GNU C Library is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+   Library General Public License for more details.
 
-You should have received a copy of the GNU Library General Public
-License along with the GNU C Library; see the file COPYING.LIB.  If
-not, write to the, 1992 Free Software Foundation, Inc., 675 Mass Ave,
-Cambridge, MA 02139, USA.  */
+   You should have received a copy of the GNU Library General Public
+   License along with the GNU C Library; see the file COPYING.LIB.  If not,
+   write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+   Boston, MA 02111-1307, USA.  */
 
 /*
- *	ANSI Standard: 4.2 DIAGNOSTICS	<assert.h>
+ *	ISO C Standard: 4.2 DIAGNOSTICS	<assert.h>
  */
 
 #ifdef	_ASSERT_H
@@ -95,4 +95,3 @@ __END_DECLS
 
 
 #endif /* NDEBUG.  */
-

autolock.sh

@@ -0,0 +1,45 @@
+#! /bin/sh
+# interlock - wrap program invocation in lock to allow
+#             parallel builds to work.
+# Written by Tom Tromey <tromey@cygnus.com>, Aug 10 1996
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+
+# Usage:
+#   interlock lock-dir-name program args-to-program...
+
+dirname="$1"
+program="$2"
+
+shift
+shift
+
+while (mkdir $dirname > /dev/null 2>&1 && exit 1 || exit 0); do
+   # Wait a bit.
+   sleep 1
+done
+
+# Race condition here: if interrupted after the loop but before this
+# trap, the lock can be left around.
+trap "rmdir $dirname > /dev/null 2>&1" 1 2 3 15
+
+# We have the lock, so run the program.
+$program ${1+"$@"}
+ret=$?
+
+# Release the lock.
+rmdir $dirname > /dev/null 2>&1
+
+exit $ret

bare/.cvsignore

@@ -1,3 +1,4 @@
+*.d *.o *.so *.po *.go stamp.* *.stamp *.ustamp *.udeps
 *.gz *.Z *.tar *.tgz
 =*
 TODO COPYING* AUTHORS copyr-* copying.*

bare/Makefile

@@ -1,23 +1,22 @@
-#   Copyright (C) 1994 Free Software Foundation, Inc.
-#    Contributed by Joel Sherrill (jsherril@redstone-emh2.army.mil),
-#      On-Line Applications Research Corporation.
-#  
+# Copyright (C) 1994, 1997 Free Software Foundation, Inc.
 # This file is part of the GNU C Library.
-#  
+# Contributed by Joel Sherrill (jsherril@redstone-emh2.army.mil),
+#    On-Line Applications Research Corporation.
+#
 # The GNU C Library is free software; you can redistribute it and/or
 # modify it under the terms of the GNU Library General Public License as
 # published by the Free Software Foundation; either version 2 of the
 # License, or (at your option) any later version.
-#  
+#
 # The GNU C Library is distributed in the hope that it will be useful,
 # but WITHOUT ANY WARRANTY; without even the implied warranty of
 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
 # Library General Public License for more details.
-#  
+#
 # You should have received a copy of the GNU Library General Public
-# License along with the GNU C Library; see the file COPYING.LIB.  If
-# not, write to the Free Software Foundation, Inc., 675 Mass Ave,
-# Cambridge, MA 02139, USA.
+# License along with the GNU C Library; see the file COPYING.LIB.  If not,
+# write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+# Boston, MA 02111-1307, USA.
 
 subdir := bare
 
@@ -33,11 +32,11 @@ include ../Rules
 #
 #  For bare targets, the $(config-vendor) is the name of the board.
 #  We will place the board dependent code ONLY in a library which
-#  is board dependent.  This way many target boards can share a 
+#  is board dependent.  This way many target boards can share a
 #  single libc.a.  To resolve all symbols and successfully link
 #  a program, the application must link against libc.a and libMY_TARGET.a.
-#  For example, the target specific library for the Motorola MVME135 
-#  board will be named libmvme135.a.  To link a program for the 
+#  For example, the target specific library for the Motorola MVME135
+#  board will be named libmvme135.a.  To link a program for the
 #  MVME135, one must link against -lc and -lmvme135.
 #
 
@@ -48,7 +47,7 @@ $(objpfx)lib$(config-vendor).a: $(bare-routines:%=$(objpfx)%.o)
 # from scratch each time.
 	rm -f $@
 ifdef objdir
-	cd $(objdir); $(AR) cq$(verbose) $@ $(^:$(objpfx)%=%)
+	cd $(objpfx); $(AR) cq$(verbose) $(@:$(objpfx)%=%) $(^:$(objpfx)%=%)
 else
 	$(AR) cq$(verbose) $@ $^
 endif

catgets/Makefile

@@ -0,0 +1,41 @@
+# Copyright (C) 1996 Free Software Foundation, Inc.
+# This file is part of the GNU C Library.
+
+# The GNU C Library is free software; you can redistribute it and/or
+# modify it under the terms of the GNU Library General Public License as
+# published by the Free Software Foundation; either version 2 of the
+# License, or (at your option) any later version.
+
+# The GNU C Library is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+# Library General Public License for more details.
+
+# You should have received a copy of the GNU Library General Public
+# License along with the GNU C Library; see the file COPYING.LIB.  If
+# not, write to the Free Software Foundation, Inc.,
+# 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+
+#
+#	Makefile for catgets.
+#
+subdir	:= catgets
+
+headers		= nl_types.h
+distribute	= catgetsinfo.h config.h
+routines	= catgets open_catalog
+others		= gencat
+install-bin	= gencat
+
+gencat-modules	= xmalloc
+
+# To find xmalloc.c
+vpath %.c ../locale/programs
+
+
+include ../Rules
+
+$(objpfx)gencat: $(gencat-modules:%=$(objpfx)%.o)
+
+CPPFLAGS := -DNLSPATH='"$(localedir)/%L/%N:$(localedir)/%L/LC_MESSAGES/%N:"' \
+	    -DHAVE_CONFIG_H $(CPPFLAGS)

catgets/catgets.c

@@ -0,0 +1,183 @@
+/* Copyright (C) 1996, 1997 Free Software Foundation, Inc.
+   This file is part of the GNU C Library.
+   Contributed by Ulrich Drepper, <drepper@gnu.ai.mit.edu>.
+
+   The GNU C Library is free software; you can redistribute it and/or
+   modify it under the terms of the GNU Library General Public License as
+   published by the Free Software Foundation; either version 2 of the
+   License, or (at your option) any later version.
+
+   The GNU C Library is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+   Library General Public License for more details.
+
+   You should have received a copy of the GNU Library General Public
+   License along with the GNU C Library; see the file COPYING.LIB.  If not,
+   write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+   Boston, MA 02111-1307, USA.  */
+
+#include <alloca.h>
+#include <errno.h>
+#include <nl_types.h>
+#include <stdlib.h>
+#include <string.h>
+#include <unistd.h>
+#include <sys/mman.h>
+
+#include "catgetsinfo.h"
+
+
+/* Open the catalog and return a descriptor for the catalog.  */
+nl_catd
+catopen (const char *cat_name, int flag)
+{
+  __nl_catd result;
+  const char *env_var;
+  const char *nlspath;
+
+  result = (__nl_catd) malloc (sizeof (*result));
+  if (result == NULL)
+    /* We cannot get enough memory.  */
+    return (nl_catd) -1;
+
+  result->status = closed;
+
+  result->cat_name = __strdup (cat_name);
+  if (result->cat_name == NULL)
+    {
+      free (result);
+      __set_errno (ENOMEM);
+      return (nl_catd) -1;
+    }
+
+  if (strchr (cat_name, '/') == NULL)
+    {
+      if (flag == NL_CAT_LOCALE)
+	{
+	  env_var = getenv ("LC_ALL");
+	  if (env_var == NULL)
+	    {
+	      env_var = getenv ("LC_MESSAGES");
+	      if (env_var == NULL)
+		{
+		  env_var = getenv ("LANG");
+		  if (env_var == NULL)
+		    env_var = "C";
+		}
+	    }
+	}
+      else
+	{
+	  env_var = getenv ("LANG");
+	  if (env_var == NULL)
+	    env_var = "C";
+	}
+
+      result->env_var = __strdup (env_var);
+      if (result->env_var == NULL)
+	{
+	  free ((void *) result->cat_name);
+	  free ((void *) result);
+	  __set_errno (ENOMEM);
+	  return (nl_catd) -1;
+	}
+
+      nlspath = __secure_getenv ("NLSPATH");
+      if (nlspath != NULL && *nlspath != '\0')
+	{
+	  /* Append the system dependent directory.  */
+	  size_t len = strlen (nlspath + 1 + sizeof NLSPATH);
+	  char *tmp = alloca (len);
+
+	  __stpcpy (__stpcpy (__stpcpy (tmp, nlspath), ":"), NLSPATH);
+	  nlspath = tmp;
+	}
+      else
+	result->nlspath = __strdup (NLSPATH);
+
+      if (result->nlspath == NULL)
+	{
+	  free ((void *) result->cat_name);
+	  free ((void *) result->env_var);
+	  free ((void *) result);
+	  __set_errno (ENOMEM);
+	  return (nl_catd) -1;
+	}
+    }
+  else
+    {
+      result->env_var = NULL;
+      result->nlspath = NULL;
+    }
+
+  return (nl_catd) result;
+}
+
+
+/* Return message from message catalog.  */
+char *
+catgets (nl_catd catalog_desc, int set, int message, const char *string)
+{
+  __nl_catd catalog;
+  size_t idx;
+  size_t cnt;
+
+  /* Be generous if catalog which failed to be open is used.  */
+  if (catalog_desc == (nl_catd) -1 || ++set <= 0 || message < 0)
+    return (char *) string;
+
+  catalog = (__nl_catd) catalog_desc;
+
+  if (catalog->status == closed)
+    __open_catalog (catalog, 1);
+
+  if (catalog->status == nonexisting)
+    {
+      __set_errno (EBADF);
+      return (char *) string;
+    }
+
+  idx = ((set * message) % catalog->plane_size) * 3;
+  cnt = 0;
+  do
+    {
+      if (catalog->name_ptr[idx + 0] == (u_int32_t) set
+	  && catalog->name_ptr[idx + 1] == (u_int32_t) message)
+	return (char *) &catalog->strings[catalog->name_ptr[idx + 2]];
+
+      idx += catalog->plane_size * 3;
+    }
+  while (++cnt < catalog->plane_depth);
+
+  __set_errno (ENOMSG);
+  return (char *) string;
+}
+
+
+/* Return resources used for loaded message catalog.  */
+int
+catclose (nl_catd catalog_desc)
+{
+  __nl_catd catalog;
+
+  catalog = (__nl_catd) catalog_desc;
+
+  if (catalog->status == mmapped)
+    munmap ((void *) catalog->file_ptr, catalog->file_size);
+  else if (catalog->status == malloced)
+    free ((void *) catalog->file_ptr);
+  else if (catalog->status != closed && catalog->status != nonexisting)
+    {
+      __set_errno (EBADF);
+      return -1;
+    }
+
+  if (catalog->nlspath)
+    free ((void *) catalog->nlspath);
+  if (catalog->env_var)
+    free ((void *) catalog->env_var);
+  free ((void *) catalog);
+
+  return 0;
+}

catgets/catgetsinfo.h

@@ -0,0 +1,59 @@
+/* Copyright (C) 1996 Free Software Foundation, Inc.
+   This file is part of the GNU C Library.
+   Contributed by Ulrich Drepper, <drepper@gnu.ai.mit.edu>.
+
+   The GNU C Library is free software; you can redistribute it and/or
+   modify it under the terms of the GNU Library General Public License as
+   published by the Free Software Foundation; either version 2 of the
+   License, or (at your option) any later version.
+
+   The GNU C Library is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+   Library General Public License for more details.
+
+   You should have received a copy of the GNU Library General Public
+   License along with the GNU C Library; see the file COPYING.LIB.  If not,
+   write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+   Boston, MA 02111-1307, USA.  */
+
+#include <sys/types.h>
+
+
+struct catalog_obj
+{
+  u_int32_t magic;
+  u_int32_t plane_size;
+  u_int32_t plane_depth;
+  /* This is in fact two arrays in one: always a pair of name and
+     pointer into the data area.  */
+  u_int32_t name_ptr[0];
+};
+
+
+/* This structure will be filled after loading the catalog.  */
+typedef struct catalog_info
+{
+  enum { closed, nonexisting, mmapped, malloced } status;
+
+  const char *cat_name;
+  const char *env_var;
+  const char *nlspath;
+
+  size_t plane_size;
+  size_t plane_depth;
+  u_int32_t *name_ptr;
+  const char *strings;
+
+  struct catalog_obj *file_ptr;
+  size_t file_size;
+} *__nl_catd;
+
+
+
+/* The magic number to signal we really have a catalog file.  */
+#define CATGETS_MAGIC 0x960408de
+
+
+/* Prototypes for helper functions.  */
+void __open_catalog (__nl_catd __catalog, int __with_path);

catgets/config.h

@@ -0,0 +1,14 @@
+#ifndef _CG_CONFIG_H
+#define _CG_CONFIG_H
+
+/* Use the internal textdomain used for libc messages.  */
+#define PACKAGE _libc_intl_domainname
+#ifndef VERSION
+/* Get libc version number.  */
+#include "../version.h"
+#endif
+
+
+#include_next <config.h>
+
+#endif

catgets/nl_types.h

@@ -0,0 +1,48 @@
+/* Copyright (C) 1996 Free Software Foundation, Inc.
+   This file is part of the GNU C Library.
+
+   The GNU C Library is free software; you can redistribute it and/or
+   modify it under the terms of the GNU Library General Public License as
+   published by the Free Software Foundation; either version 2 of the
+   License, or (at your option) any later version.
+
+   The GNU C Library is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+   Library General Public License for more details.
+
+   You should have received a copy of the GNU Library General Public
+   License along with the GNU C Library; see the file COPYING.LIB.  If not,
+   write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+   Boston, MA 02111-1307, USA.  */
+
+#ifndef _NL_TYPES_H
+#define _NL_TYPES_H 1
+#include <features.h>
+
+/* The default message set used by the gencat program.  */
+#define NL_SETD 1
+
+/* Value for FLAG parameter of `catgets' to say we want XPG4 compliance.  */
+#define NL_CAT_LOCALE 1
+
+
+__BEGIN_DECLS
+
+/* Message catalog descriptor type.  */
+typedef void *nl_catd;
+
+/* Open message catalog for later use, returning descriptor.  */
+extern nl_catd catopen __P ((__const char *__cat_name, int __flag));
+
+/* Return translation with NUMBER in SET of CATALOG; if not found
+   return STRING.  */
+extern char *catgets __P ((nl_catd __catalog, int __set, int __number,
+			   __const char *__string));
+
+/* Close message CATALOG.  */
+extern int catclose __P ((nl_catd __catalog));
+
+__END_DECLS
+
+#endif /* nl_types.h  */

catgets/open_catalog.c

@@ -0,0 +1,263 @@
+/* Copyright (C) 1996 Free Software Foundation, Inc.
+   This file is part of the GNU C Library.
+   Contributed by Ulrich Drepper, <drepper@gnu.ai.mit.edu>.
+
+   The GNU C Library is free software; you can redistribute it and/or
+   modify it under the terms of the GNU Library General Public License as
+   published by the Free Software Foundation; either version 2 of the
+   License, or (at your option) any later version.
+
+   The GNU C Library is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+   Library General Public License for more details.
+
+   You should have received a copy of the GNU Library General Public
+   License along with the GNU C Library; see the file COPYING.LIB.  If not,
+   write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+   Boston, MA 02111-1307, USA.  */
+
+#include <endian.h>
+#include <fcntl.h>
+#include <string.h>
+#include <stdlib.h>
+#include <unistd.h>
+#include <sys/mman.h>
+#include <sys/stat.h>
+
+#include "catgetsinfo.h"
+
+
+#define SWAPU32(w) \
+  (((w) << 24) | (((w) & 0xff00) << 8) | (((w) >> 8) & 0xff00) | ((w) >> 24))
+
+
+void
+__open_catalog (__nl_catd catalog, int with_path)
+{
+  int fd;
+  struct stat st;
+  int swapping;
+
+  if (strchr (catalog->cat_name, '/') != NULL || !with_path)
+    fd = open (catalog->cat_name, O_RDONLY);
+  else
+    {
+      const char *run_nlspath = catalog->nlspath;
+#define ENOUGH(n)							      \
+  if (bufact + (n) >=bufmax) 						      \
+    {									      \
+      char *old_buf = buf;						      \
+      bufmax += 256 + (n);						      \
+      buf = (char *) alloca (bufmax);					      \
+      memcpy (buf, old_buf, bufact);					      \
+    }
+
+      /* The RUN_NLSPATH variable contains a colon separated list of
+	 descriptions where we expect to find catalogs.  We have to
+	 recognize certain % substitutions and stop when we found the
+	 first existing file.  */
+      char *buf;
+      size_t bufact;
+      size_t bufmax;
+
+      buf = NULL;
+      bufmax = 0;
+
+      fd = -1;
+      while (*run_nlspath != '\0')
+	{
+	  bufact = 0;
+	  while (*run_nlspath != ':' && *run_nlspath != '\0')
+	    if (*run_nlspath == '%')
+	      {
+		const char *tmp;
+
+		++run_nlspath;	/* We have seen the `%'.  */
+		switch (*run_nlspath++)
+		  {
+		  case 'N':
+		    /* Use the catalog name.  */
+		    ENOUGH (strlen (catalog->cat_name));
+		    bufact = __stpcpy (&buf[bufact], catalog->cat_name) - buf;
+		    break;
+		  case 'L':
+		    /* Use the current locale category value.  */
+		    ENOUGH (strlen (catalog->env_var));
+		    bufact = __stpcpy (&buf[bufact], catalog->env_var) - buf;
+		    break;
+		  case 'l':
+		    /* Use language element of locale category value.  */
+		    tmp = catalog->env_var;
+		    do
+		      {
+			ENOUGH (1);
+			buf[bufact++] = *tmp++;
+		      }
+		    while (*tmp != '\0' && *tmp != '_' && *tmp != '.');
+		    break;
+		  case 't':
+		    /* Use territory element of locale category value.  */
+		    tmp = catalog->env_var;
+		    do
+		      ++tmp;
+		    while (*tmp != '\0' && *tmp != '_' && *tmp != '.');
+		    if (*tmp == '_')
+		      {
+			++tmp;
+			do
+			  {
+			    ENOUGH (1);
+			    buf[bufact++] = *tmp;
+			  }
+			while (*tmp != '\0' && *tmp != '.');
+		      }
+		    break;
+		  case 'c':
+		    /* Use code set element of locale category value.  */
+		    tmp = catalog->env_var;
+		    do
+		      ++tmp;
+		    while (*tmp != '\0' && *tmp != '.');
+		    if (*tmp == '.')
+		      {
+			++tmp;
+			do
+			  {
+			    ENOUGH (1);
+			    buf[bufact++] = *tmp;
+			  }
+			while (*tmp != '\0');
+		      }
+		    break;
+		  case '%':
+		    ENOUGH (1);
+		    buf[bufact++] = '%';
+		    break;
+		  default:
+		    /* Unknown variable: ignore this path element.  */
+		    bufact = 0;
+		    while (*run_nlspath != '\0' && *run_nlspath != ':')
+		      ++run_nlspath;
+		    break;
+		  }
+	      }
+	    else
+	      {
+		ENOUGH (1);
+		buf[bufact++] = *run_nlspath++;
+	      }
+	  ENOUGH (1);
+	  buf[bufact] = '\0';
+
+	  if (bufact != 0)
+	    {
+	      fd = __open (buf, O_RDONLY);
+	      if (fd >= 0)
+		break;
+	    }
+
+	  ++run_nlspath;
+	}
+    }
+
+  if (fd < 0 || __fstat (fd, &st) < 0)
+    {
+      catalog->status = nonexisting;
+      return;
+    }
+
+#ifndef MAP_COPY
+    /* Linux seems to lack read-only copy-on-write.  */
+#define MAP_COPY MAP_PRIVATE
+#endif
+#ifndef MAP_FILE
+    /* Some systems do not have this flag; it is superfluous.  */
+#define MAP_FILE 0
+#endif
+#ifndef MAP_INHERIT
+    /* Some systems might lack this; they lose.  */
+#define MAP_INHERIT 0
+#endif
+  catalog->file_size = st.st_size;
+  catalog->file_ptr =
+    (struct catalog_obj *) __mmap (NULL, st.st_size, PROT_READ,
+				   MAP_FILE|MAP_COPY|MAP_INHERIT, fd, 0);
+  if (catalog->file_ptr != (struct catalog_obj *) -1)
+    /* Tell the world we managed to mmap the file.  */
+    catalog->status = mmapped;
+  else
+    {
+      /* mmap failed perhaps because the system call is not
+	 implemented.  Try to load the file.  */
+      size_t todo;
+      catalog->file_ptr = malloc (st.st_size);
+      if (catalog->file_ptr == NULL)
+	{
+	  catalog->status = nonexisting;
+	  return;
+	}
+      todo = st.st_size;
+      /* Save read, handle partial reads.  */
+      do
+	{
+	  size_t now = __read (fd, (((char *) &catalog->file_ptr)
+				    + (st.st_size - todo)), todo);
+	  if (now == 0)
+	    {
+	      free ((void *) catalog->file_ptr);
+	      catalog->status = nonexisting;
+	      return;
+	    }
+	  todo -= now;
+	}
+      while (todo > 0);
+      catalog->status = malloced;
+    }
+
+  /* We don't need the file anymore.  */
+  __close (fd);
+
+  /* Determine whether the file is a catalog file and if yes whether
+     it is written using the correct byte order.  Else we have to swap
+     the values.  */
+  if (catalog->file_ptr->magic == CATGETS_MAGIC)
+    swapping = 0;
+  else if (catalog->file_ptr->magic == SWAPU32 (CATGETS_MAGIC))
+    swapping = 1;
+  else
+    {
+      /* Illegal file.  Free he resources and mark catalog as not
+	 usable.  */
+      if (catalog->status == mmapped)
+	__munmap ((void *) catalog->file_ptr, catalog->file_size);
+      else
+	free (catalog->file_ptr);
+      catalog->status = nonexisting;
+      return;
+    }
+
+#define SWAP(x) (swapping ? SWAPU32 (x) : (x))
+
+  /* Get dimensions of the used hashing table.  */
+  catalog->plane_size = SWAP (catalog->file_ptr->plane_size);
+  catalog->plane_depth = SWAP (catalog->file_ptr->plane_depth);
+
+  /* The file contains two versions of the pointer tables.  Pick the
+     right one for the local byte order.  */
+#if __BYTE_ORDER == __LITTLE_ENDIAN
+  catalog->name_ptr = &catalog->file_ptr->name_ptr[0];
+#elif __BYTE_ORDER == __BIG_ENDIAN
+  catalog->name_ptr = &catalog->file_ptr->name_ptr[catalog->plane_size
+						  * catalog->plane_depth
+						  * 3];
+#else
+# error Cannot handle __BYTE_ORDER byte order
+#endif
+
+  /* The rest of the file contains all the strings.  They are
+     addressed relative to the position of the first string.  */
+  catalog->strings =
+    (const char *) &catalog->file_ptr->name_ptr[catalog->plane_size
+					       * catalog->plane_depth * 3 * 2];
+}

config.guess

@@ -1,6 +1,6 @@
 #! /bin/sh
 # Attempt to guess a canonical system name.
-#   Copyright (C) 1992, 1993, 1994, 1995 Free Software Foundation, Inc.
+#   Copyright (C) 1992, 93, 94, 95, 96, 1997 Free Software Foundation, Inc.
 #
 # This file is free software; you can redistribute it and/or modify it
 # under the terms of the GNU General Public License as published by
@@ -51,35 +51,65 @@ trap 'rm -f dummy.c dummy.o dummy; exit 1' 1 2 15
 # Note: order is significant - the case branches are not exclusive.
 
 case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
-    alpha:OSF1:V*:*)
-	# After 1.2, OSF1 uses "V1.3" for uname -r.
-	echo alpha-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^V//'`
-	exit 0 ;;
     alpha:OSF1:*:*)
+	# A Vn.n version is a released version.
+	# A Tn.n version is a released field test version.
+	# A Xn.n version is an unreleased experimental baselevel.
 	# 1.2 uses "1.2" for uname -r.
-	echo alpha-dec-osf${UNAME_RELEASE}
-        exit 0 ;;
+	echo alpha-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[VTX]//'`
+	exit 0 ;;
     21064:Windows_NT:50:3)
 	echo alpha-dec-winnt3.5
 	exit 0 ;;
+    Amiga*:UNIX_System_V:4.0:*)
+	echo m68k-cbm-sysv4
+	exit 0;;
     amiga:NetBSD:*:*)
       echo m68k-cbm-netbsd${UNAME_RELEASE}
       exit 0 ;;
+    amiga:OpenBSD:*:*)
+	echo m68k-unknown-openbsd${UNAME_RELEASE}
+	exit 0 ;;
+    arc64:OpenBSD:*:*)
+	echo mips64el-unknown-openbsd${UNAME_RELEASE}
+	exit 0 ;;
+    arc:OpenBSD:*:*)
+	echo mipsel-unknown-openbsd${UNAME_RELEASE}
+	exit 0 ;;
+    hkmips:OpenBSD:*:*)
+	echo mips-unknown-openbsd${UNAME_RELEASE}
+	exit 0 ;;
+    pmax:OpenBSD:*:*)
+	echo mipsel-unknown-openbsd${UNAME_RELEASE}
+	exit 0 ;;
+    sgi:OpenBSD:*:*)
+	echo mips-unknown-openbsd${UNAME_RELEASE}
+	exit 0 ;;
+    wgrisc:OpenBSD:*:*)
+	echo mipsel-unknown-openbsd${UNAME_RELEASE}
+	exit 0 ;;
     arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*)
 	echo arm-acorn-riscix${UNAME_RELEASE}
 	exit 0;;
-    Pyramid*:OSx*:*:*)
+    SR2?01:HI-UX/MPP:*:*)
+	echo hppa1.1-hitachi-hiuxmpp
+	exit 0;;
+    Pyramid*:OSx*:*:*|MIS*:OSx*:*:*)
+	# akee@wpdis03.wpafb.af.mil (Earle F. Ake) contributed MIS and NILE.
 	if test "`(/bin/universe) 2>/dev/null`" = att ; then
 		echo pyramid-pyramid-sysv3
 	else
 		echo pyramid-pyramid-bsd
 	fi
 	exit 0 ;;
-    sun4*:SunOS:5.*:*)
+    NILE:*:*:dcosx)
+	echo pyramid-pyramid-svr4
+	exit 0 ;;
+    sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*)
 	echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
 	exit 0 ;;
     i86pc:SunOS:5.*:*)
-	echo i386-unknown-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+	echo i386-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
 	exit 0 ;;
     sun4*:SunOS:6*:*)
 	# According to config.sub, this is the proper way to canonicalize
@@ -99,25 +129,66 @@ case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
     sun3*:SunOS:*:*)
 	echo m68k-sun-sunos${UNAME_RELEASE}
 	exit 0 ;;
+    aushp:SunOS:*:*)
+	echo sparc-auspex-sunos${UNAME_RELEASE}
+	exit 0 ;;
     atari*:NetBSD:*:*)
 	echo m68k-atari-netbsd${UNAME_RELEASE}
 	exit 0 ;;
+    atari*:OpenBSD:*:*)
+	echo m68k-unknown-openbsd${UNAME_RELEASE}
+	exit 0 ;;
     sun3*:NetBSD:*:*)
 	echo m68k-sun-netbsd${UNAME_RELEASE}
 	exit 0 ;;
+    sun3*:OpenBSD:*:*)
+	echo m68k-unknown-openbsd${UNAME_RELEASE}
+	exit 0 ;;
     mac68k:NetBSD:*:*)
 	echo m68k-apple-netbsd${UNAME_RELEASE}
 	exit 0 ;;
+    mac68k:OpenBSD:*:*)
+	echo m68k-unknown-openbsd${UNAME_RELEASE}
+	exit 0 ;;
+    mvme68k:OpenBSD:*:*)
+	echo m68k-unknown-openbsd${UNAME_RELEASE}
+	exit 0 ;;
+    mvme88k:OpenBSD:*:*)
+	echo m88k-unknown-openbsd${UNAME_RELEASE}
+	exit 0 ;;
+    powerpc:machten:*:*)
+	echo powerpc-apple-machten${UNAME_RELEASE}
+	exit 0 ;;
+    RISC*:Mach:*:*)
+	echo mips-dec-mach_bsd4.3
+	exit 0 ;;
     RISC*:ULTRIX:*:*)
 	echo mips-dec-ultrix${UNAME_RELEASE}
 	exit 0 ;;
     VAX*:ULTRIX*:*:*)
 	echo vax-dec-ultrix${UNAME_RELEASE}
 	exit 0 ;;
-    mips:*:4*:UMIPS)
-	echo mips-mips-riscos4sysv
-	exit 0 ;;
-    mips:*:5*:RISCos)
+    mips:*:*:UMIPS | mips:*:*:RISCos)
+	sed 's/^	//' << EOF >dummy.c
+	int main (argc, argv) int argc; char **argv; {
+	#if defined (host_mips) && defined (MIPSEB)
+	#if defined (SYSTYPE_SYSV)
+	  printf ("mips-mips-riscos%ssysv\n", argv[1]); exit (0);
+	#endif
+	#if defined (SYSTYPE_SVR4)
+	  printf ("mips-mips-riscos%ssvr4\n", argv[1]); exit (0);
+	#endif
+	#if defined (SYSTYPE_BSD43) || defined(SYSTYPE_BSD)
+	  printf ("mips-mips-riscos%sbsd\n", argv[1]); exit (0);
+	#endif
+	#endif
+	  exit (-1);
+	}
+EOF
+	${CC-cc} dummy.c -o dummy \
+	  && ./dummy `echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` \
+	  && rm dummy.c dummy && exit 0
+	rm -f dummy.c dummy
 	echo mips-mips-riscos${UNAME_RELEASE}
 	exit 0 ;;
     Night_Hawk:Power_UNIX:*:*)
@@ -134,8 +205,8 @@ case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
 	exit 0 ;;
     AViiON:dgux:*:*)
         # DG/UX returns AViiON for all architectures
-        UNAME_PROCESSOR=`uname -p`
-        if [ $UNAME_PROCESSOR = mc88100 -o $UNAME_PROCESSOR = mc88100 ] ; then
+        UNAME_PROCESSOR=`/usr/bin/uname -p`
+        if [ $UNAME_PROCESSOR = mc88100 -o $UNAME_PROCESSOR = mc88110 ] ; then
 	if [ ${TARGET_BINARY_INTERFACE}x = m88kdguxelfx \
 	     -o ${TARGET_BINARY_INTERFACE}x = x ] ; then
 		echo m88k-dg-dgux${UNAME_RELEASE}
@@ -161,10 +232,10 @@ case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
     *:IRIX*:*:*)
 	echo mips-sgi-irix`echo ${UNAME_RELEASE}|sed -e 's/-/_/g'`
 	exit 0 ;;
-   ????????:AIX?:[12].1:2)   # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX.
+    ????????:AIX?:[12].1:2)   # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX.
 	echo romp-ibm-aix      # uname -m gives an 8 hex-code CPU id
 	exit 0 ;;              # Note that: echo "'`uname -s`'" gives 'AIX '
-    i[34]86:AIX:*:*)
+    i?86:AIX:*:*)
 	echo i386-ibm-aix
 	exit 0 ;;
     *:AIX:2:3)
@@ -209,7 +280,7 @@ EOF
 	echo romp-ibm-bsd4.4
 	exit 0 ;;
     ibmrt:*BSD:*|romp-ibm:BSD:*)            # covers RT/PC NetBSD and
-	echo romp-ibm-bsd${UNAME_RELEASE}   # 4.3 with uname added to 
+	echo romp-ibm-bsd${UNAME_RELEASE}   # 4.3 with uname added to
 	exit 0 ;;                           # report: romp-ibm BSD 4.3
     *:BOSX:*:*)
 	echo rs6000-bull-bosx
@@ -227,7 +298,7 @@ EOF
 	case "${UNAME_MACHINE}" in
 	    9000/31? )            HP_ARCH=m68000 ;;
 	    9000/[34]?? )         HP_ARCH=m68k ;;
-	    9000/7?? | 9000/8?[679] ) HP_ARCH=hppa1.1 ;;
+	    9000/7?? | 9000/8?[1679] ) HP_ARCH=hppa1.1 ;;
 	    9000/8?? )            HP_ARCH=hppa1.0 ;;
 	esac
 	HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'`
@@ -275,6 +346,13 @@ EOF
     hp8??:OSF1:*:*)
 	echo hppa1.0-hp-osf
 	exit 0 ;;
+    i?86:OSF1:*:*)
+	if [ -x /usr/sbin/sysversion ] ; then
+	    echo ${UNAME_MACHINE}-unknown-osf1mk
+	else
+	    echo ${UNAME_MACHINE}-unknown-osf1
+	fi
+	exit 0 ;;
     parisc*:Lites*:*:*)
 	echo hppa1.1-hp-lites
 	exit 0 ;;
@@ -302,17 +380,33 @@ EOF
     CRAY*Y-MP:*:*:*)
 	echo ymp-cray-unicos${UNAME_RELEASE}
 	exit 0 ;;
-    CRAY*C90:*:*:*)
-	echo c90-cray-unicos${UNAME_RELEASE}
+    CRAY*[A-Z]90:*:*:*)
+	echo ${UNAME_MACHINE}-cray-unicos${UNAME_RELEASE} \
+	| sed -e 's/CRAY.*\([A-Z]90\)/\1/' \
+	      -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/
+	exit 0 ;;
+    CRAY*TS:*:*:*)
+	echo t90-cray-unicos${UNAME_RELEASE}
 	exit 0 ;;
     CRAY-2:*:*:*)
 	echo cray2-cray-unicos
         exit 0 ;;
+    F300:UNIX_System_V:*:*)
+        FUJITSU_SYS=`uname -p | tr [A-Z] [a-z] | sed -e 's/\///'`
+        FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'`
+        echo "f300-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
+        exit 0 ;;
+    F301:UNIX_System_V:*:*)
+       echo f301-fujitsu-uxpv`echo $UNAME_RELEASE | sed 's/ .*//'`
+       exit 0 ;;
     hp3[0-9][05]:NetBSD:*:*)
 	echo m68k-hp-netbsd${UNAME_RELEASE}
 	exit 0 ;;
-    i[34]86:BSD/386:*:* | *:BSD/OS:*:*)
-	echo ${UNAME_MACHINE}-unknown-bsdi${UNAME_RELEASE}
+    hp300:OpenBSD:*:*)
+	echo m68k-unknown-openbsd${UNAME_RELEASE}
+	exit 0 ;;
+    i?86:BSD/386:*:* | *:BSD/OS:*:*)
+	echo ${UNAME_MACHINE}-pc-bsdi${UNAME_RELEASE}
 	exit 0 ;;
     *:FreeBSD:*:*)
 	echo ${UNAME_MACHINE}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`
@@ -320,26 +414,63 @@ EOF
     *:NetBSD:*:*)
 	echo ${UNAME_MACHINE}-unknown-netbsd`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'`
 	exit 0 ;;
+    *:OpenBSD:*:*)
+	echo ${UNAME_MACHINE}-unknown-openbsd`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'`
+	exit 0 ;;
+    i*:CYGWIN*:*)
+	echo i386-pc-cygwin32
+	exit 0 ;;
+    p*:CYGWIN*:*)
+	echo powerpcle-unknown-cygwin32
+	exit 0 ;;
+    prep*:SunOS:5.*:*)
+	echo powerpcle-unknown-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+	exit 0 ;;
     *:GNU:*:*)
-	echo `echo ${UNAME_MACHINE}|sed -e 's,/.*$,,'`-unknown-gnu`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'`
+	echo `echo ${UNAME_MACHINE}|sed -e 's,-.*$,,'`-unknown-gnu`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'`
 	exit 0 ;;
     *:Linux:*:*)
 	# The BFD linker knows what the default object file format is, so
 	# first see if it will tell us.
 	ld_help_string=`ld --help 2>&1`
-	if echo $ld_help_string | grep >/dev/null 2>&1 "supported emulations: elf_i[345]86"; then
-	  echo "${UNAME_MACHINE}-unknown-linux" ; exit 0
-	elif echo $ld_help_string | grep >/dev/null 2>&1 "supported emulations: i[345]86linux"; then
-	  echo "${UNAME_MACHINE}-unknown-linuxaout" ; exit 0
-	elif echo $ld_help_string | grep >/dev/null 2>&1 "supported emulations: i[345]86coff"; then
-	  echo "${UNAME_MACHINE}-unknown-linuxcoff" ; exit 0
+	if echo "$ld_help_string" | grep >/dev/null 2>&1 "supported emulations: elf_i.86"; then
+	  echo "${UNAME_MACHINE}-pc-linux-gnu" ; exit 0
+	elif echo "$ld_help_string" | grep >/dev/null 2>&1 "supported emulations: i.86linux"; then
+	  echo "${UNAME_MACHINE}-pc-linux-gnuaout" ; exit 0
+	elif echo "$ld_help_string" | grep >/dev/null 2>&1 "supported emulations: i.86coff"; then
+	  echo "${UNAME_MACHINE}-pc-linux-gnucoff" ; exit 0
+	elif echo "$ld_help_string" | grep >/dev/null 2>&1 "supported emulations: m68kelf"; then
+	  echo "${UNAME_MACHINE}-unknown-linux-gnu" ; exit 0
+	elif echo "$ld_help_string" | grep >/dev/null 2>&1 "supported emulations: m68klinux"; then
+	  echo "${UNAME_MACHINE}-unknown-linux-gnuaout" ; exit 0
+	elif echo "$ld_help_string" | grep >/dev/null 2>&1 "supported emulations: elf32ppc"; then
+	  echo "powerpc-unknown-linux-gnu" ; exit 0
 	elif test "${UNAME_MACHINE}" = "alpha" ; then
-	  echo alpha-unknown-linux ; exit 0
+	  echo alpha-unknown-linux-gnu ; exit 0
+	elif test "${UNAME_MACHINE}" = "sparc" ; then
+	  echo sparc-unknown-linux-gnu ; exit 0
+	elif test "${UNAME_MACHINE}" = "mips" ; then
+	  cat >dummy.c <<EOF
+main(argc, argv)
+int argc;
+char *argv[];
+{
+#ifdef __MIPSEB__
+  printf ("%s-unknown-linux-gnu\n", argv[1]);
+#endif
+#ifdef __MIPSEL__
+  printf ("%sel-unknown-linux-gnu\n", argv[1]);
+#endif
+  return 0;
+}
+EOF
+	  ${CC-cc} dummy.c -o dummy 2>/dev/null && ./dummy "${UNAME_MACHINE}" && rm dummy.c dummy && exit 0
+	  rm -f dummy.c dummy
 	else
-	  # Either a pre-BFD a.out linker (linuxoldld) or one that does not give us
-	  # useful --help.  Gcc wants to distinguish between linuxoldld and linuxaout.
+	  # Either a pre-BFD a.out linker (linux-gnuoldld) or one that does not give us
+	  # useful --help.  Gcc wants to distinguish between linux-gnuoldld and linux-gnuaout.
 	  test ! -d /usr/lib/ldscripts/. \
-	    && echo "${UNAME_MACHINE}-unknown-linuxoldld" && exit 0
+	    && echo "${UNAME_MACHINE}-pc-linux-gnuoldld" && exit 0
 	  # Determine whether the default compiler is a.out or elf
 	  cat >dummy.c <<EOF
 main(argc, argv)
@@ -347,9 +478,9 @@ int argc;
 char *argv[];
 {
 #ifdef __ELF__
-  printf ("%s-unknown-linux\n", argv[1]);
+  printf ("%s-pc-linux-gnu\n", argv[1]);
 #else
-  printf ("%s-unknown-linuxaout\n", argv[1]);
+  printf ("%s-pc-linux-gnuaout\n", argv[1]);
 #endif
   return 0;
 }
@@ -359,32 +490,32 @@ EOF
 	fi ;;
 # ptx 4.0 does uname -s correctly, with DYNIX/ptx in there.  earlier versions
 # are messed up and put the nodename in both sysname and nodename.
-    i[34]86:DYNIX/ptx:4*:*)
+    i?86:DYNIX/ptx:4*:*)
 	echo i386-sequent-sysv4
 	exit 0 ;;
-    i[34]86:*:4.*:* | i[34]86:SYSTEM_V:4.*:*)
+    i?86:*:4.*:* | i?86:SYSTEM_V:4.*:*)
 	if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then
 		echo ${UNAME_MACHINE}-univel-sysv${UNAME_RELEASE}
 	else
-		echo ${UNAME_MACHINE}-unknown-sysv${UNAME_RELEASE}
+		echo ${UNAME_MACHINE}-pc-sysv${UNAME_RELEASE}
 	fi
 	exit 0 ;;
-    i[34]86:*:3.2:*)
+    i?86:*:3.2:*)
 	if test -f /usr/options/cb.name; then
 		UNAME_REL=`sed -n 's/.*Version //p' </usr/options/cb.name`
-		echo ${UNAME_MACHINE}-unknown-isc$UNAME_REL
+		echo ${UNAME_MACHINE}-pc-isc$UNAME_REL
 	elif /bin/uname -X 2>/dev/null >/dev/null ; then
 		UNAME_REL=`(/bin/uname -X|egrep Release|sed -e 's/.*= //')`
 		(/bin/uname -X|egrep i80486 >/dev/null) && UNAME_MACHINE=i486
 		(/bin/uname -X|egrep '^Machine.*Pentium' >/dev/null) \
 			&& UNAME_MACHINE=i586
-		echo ${UNAME_MACHINE}-unknown-sco$UNAME_REL
+		echo ${UNAME_MACHINE}-pc-sco$UNAME_REL
 	else
-		echo ${UNAME_MACHINE}-unknown-sysv32
+		echo ${UNAME_MACHINE}-pc-sysv32
 	fi
 	exit 0 ;;
     Intel:Mach:3*:*)
-	echo i386-unknown-mach3
+	echo i386-pc-mach3
 	exit 0 ;;
     paragon:*:*:*)
 	echo i860-intel-osf1
@@ -400,28 +531,36 @@ EOF
 	# "miniframe"
 	echo m68010-convergent-sysv
 	exit 0 ;;
-    M680[234]0:*:R3V[567]*:*)
+    M68*:*:R3V[567]*:*)
 	test -r /sysV68 && echo 'm68k-motorola-sysv' && exit 0 ;;
-    3[34]??:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0)
-        uname -p 2>/dev/null | grep 86 >/dev/null \
-          && echo i486-ncr-sysv4.3 && exit 0 ;;
+    3[34]??:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 4850:*:4.0:3.0)
+	OS_REL=''
+	test -r /etc/.relid \
+	&& OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid`
+	/bin/uname -p 2>/dev/null | grep 86 >/dev/null \
+	  && echo i486-ncr-sysv4.3${OS_REL} && exit 0
+	/bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \
+	  && echo i586-ncr-sysv4.3${OS_REL} && exit 0 ;;
     3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*)
-        uname -p 2>/dev/null | grep 86 >/dev/null \
+        /bin/uname -p 2>/dev/null | grep 86 >/dev/null \
           && echo i486-ncr-sysv4 && exit 0 ;;
-    m680[234]0:LynxOS:2.[23]*:*)
-	echo m68k-lynx-lynxos${UNAME_RELEASE}
+    m68*:LynxOS:2.*:*)
+	echo m68k-unknown-lynxos${UNAME_RELEASE}
 	exit 0 ;;
     mc68030:UNIX_System_V:4.*:*)
 	echo m68k-atari-sysv4
 	exit 0 ;;
-    i[34]86:LynxOS:2.[23]*:*)
-	echo i386-lynx-lynxos${UNAME_RELEASE}
+    i?86:LynxOS:2.*:*)
+	echo i386-unknown-lynxos${UNAME_RELEASE}
 	exit 0 ;;
-    TSUNAMI:LynxOS:2.[23]*:*)
-	echo sparc-lynx-lynxos${UNAME_RELEASE}
+    TSUNAMI:LynxOS:2.*:*)
+	echo sparc-unknown-lynxos${UNAME_RELEASE}
 	exit 0 ;;
-    rs6000:LynxOS:2.[23]*:*)
-	echo rs6000-lynx-lynxos${UNAME_RELEASE}
+    rs6000:LynxOS:2.*:* | PowerPC:LynxOS:2.*:*)
+	echo rs6000-unknown-lynxos${UNAME_RELEASE}
+	exit 0 ;;
+    SM[BE]S:UNIX_SV:*:*)
+	echo mips-dde-sysv${UNAME_RELEASE}
 	exit 0 ;;
     RM*:SINIX-*:*:*)
 	echo mips-sni-sysv4
@@ -434,6 +573,29 @@ EOF
 		echo ns32k-sni-sysv
 	fi
 	exit 0 ;;
+    PENTIUM:CPunix:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort
+                           # says <Richard.M.Bartel@ccMail.Census.GOV>
+        echo i586-unisys-sysv4
+        exit 0 ;;
+    *:UNIX_System_V:4*:FTX*)
+	# From Gerald Hewes <hewes@openmarket.com>.
+	# How about differentiating between stratus architectures? -djm
+	echo hppa1.1-stratus-sysv4
+	exit 0 ;;
+    *:*:*:FTX*)
+	# From seanf@swdc.stratus.com.
+	echo i860-stratus-sysv4
+	exit 0 ;;
+    mc68*:A/UX:*:*)
+	echo m68k-apple-aux${UNAME_RELEASE}
+	exit 0 ;;
+    R3000:*System_V*:*:* | R4000:UNIX_SYSV:*:*)
+	if [ -d /usr/nec ]; then
+	        echo mips-nec-sysv${UNAME_RELEASE}
+	else
+	        echo mips-unknown-sysv${UNAME_RELEASE}
+	fi
+        exit 0 ;;
 esac
 
 #echo '(No uname command or uname output not recognized.)' 1>&2
@@ -477,7 +639,7 @@ main ()
 #endif
   int version;
   version=`(hostinfo | sed -n 's/.*NeXT Mach \([0-9]*\).*/\1/p') 2>/dev/null`;
-  printf ("%s-next-nextstep%s\n", __ARCHITECTURE__,  version==2 ? "2" : "3");
+  printf ("%s-next-nextstep%d\n", __ARCHITECTURE__, version);
   exit (0);
 #endif
 
@@ -494,7 +656,7 @@ main ()
 #endif
 
 #if defined (__386BSD__)
-  printf ("i386-unknown-bsd\n"); exit (0);
+  printf ("i386-pc-bsd\n"); exit (0);
 #endif
 
 #if defined (sequent)

config.h.in

@@ -4,12 +4,19 @@
 #undef	HAVE_GNU_LD
 
 /* Define if using ELF, which supports weak symbols.
-   This implies HAVE_WEAK_SYMBOLS; set by --with-elf.  */
+   This implies HAVE_ASM_WEAK_DIRECTIVE and NO_UNDERSCORES; set by
+   --with-elf.  */
 #undef	HAVE_ELF
 
-/* Define if weak symbols are available in the assembler and
-   linker being used.  Set by --with-weak-symbols.  */
-#undef	HAVE_WEAK_SYMBOLS
+/* Define if C symbols are asm symbols.  Don't define if C symbols
+   have a `_' prepended to make the asm symbol.  */
+#undef	NO_UNDERSCORES
+
+/* Define if weak symbols are available via the `.weak' directive.  */
+#undef	HAVE_ASM_WEAK_DIRECTIVE
+
+/* Define if weak symbols are available via the `.weakext' directive.  */
+#undef	HAVE_ASM_WEAKEXT_DIRECTIVE
 
 /* Define if not using ELF, but `.init' and `.fini' sections are available.  */
 #undef	HAVE_INITFINI
@@ -24,22 +31,36 @@
    declaring a symbol global (default `.globl').  */
 #undef	ASM_GLOBAL_DIRECTIVE
 
-/* ELF has weak symbols, and with GNU ld a.out does too.  */
-#ifndef HAVE_WEAK_SYMBOLS
-#if defined (HAVE_ELF) || defined (HAVE_GNU_LD)
-#define HAVE_WEAK_SYMBOLS
-#endif
-#endif
-
 /* Define to use GNU libio instead of GNU stdio.
    This is defined by configure under --enable-libio.  */
 #undef	USE_IN_LIBIO
-/*  */
-/* These symbols might be defined by some sysdeps configures.  */
+
+/* Define if using ELF and the assembler supports the `.previous'
+   directive.  */
+#undef	HAVE_ASM_PREVIOUS_DIRECTIVE
+
+/* Define if using ELF and the assembler supports the `.popsection'
+   directive.  */
+#undef	HAVE_ASM_POPSECTION_DIRECTIVE
+
+/* Define if versioning of the library is wanted.  */
+#undef	DO_VERSIONING
+
+/*
+ */
+
+#ifndef	_LIBC
+
+/* These symbols might be defined by some sysdeps configures.
+   They are used only in miscellaneous generator programs, not
+   in compiling libc itself.   */
 
 /* sysdeps/generic/configure.in */
 #undef	HAVE_PSIGNAL
 
+/* sysdeps/unix/configure.in */
+#undef	HAVE_STRERROR
+
 /* sysdeps/unix/common/configure.in */
 #undef	HAVE_SYS_SIGLIST
 #undef	HAVE__SYS_SIGLIST
@@ -49,3 +70,20 @@
 #undef	HAVE__CTYPE__
 #undef	HAVE__CTYPE
 #undef	HAVE__LOCP
+
+#endif
+
+/*
+ */
+
+#ifdef	_LIBC
+
+/* The zic and zdump programs need these definitions.  */
+
+#define	HAVE_STRERROR	1
+
+/* The locale code needs these definitions.  */
+
+#define HAVE_REGEX 1
+
+#endif

config.make.in

@@ -3,31 +3,51 @@
 # Don't edit this file.  Put configuration parameters in configparms instead.
 
 # Installation prefixes.
+install_root =
 prefix = @prefix@
 exec_prefix = @exec_prefix@
+slibdir = @libc_cv_slibdir@
+sysconfdir = @libc_cv_sysconfdir@
+rootsbindir = @libc_cv_rootsbindir@
+
+# If ldconfig exists.  This will go away as soon as `ldconfig' is available
+# in GNU libc.
+has-ldconfig = @has_ldconfig@
 
 # System configuration.
 config-machine = @host_cpu@
+base-machine = @base_machine@
 config-vendor = @host_vendor@
 config-os = @host_os@
 config-sysdirs = @sysnames@
 
-config-defines = @DEFS@
+defines = @DEFINES@
 
 elf = @elf@
-weak-symbols = @weak@
 have-initfini = @libc_cv_have_initfini@
 
+versioning = @VERSIONING@
+
+have-no-whole-archive = @libc_cv_ld_no_whole_archive@
+have-no-exceptions = @libc_cv_gcc_no_exceptions@
+have-bash2 = @libc_cv_have_bash2@
+have-ksh = @libc_cv_have_ksh@
+
 # Configuration options.
 gnu-as = @gnu_as@
 gnu-ld = @gnu_ld@
 build-shared = @shared@
 build-profile = @profile@
 build-omitfp = @omitfp@
+build-bounded = @bounded@
 stdio = @stdio@
+add-ons = @subdirs@
+cross-compiling = @cross_compiling@
 
 # Build tools.
 CC = @CC@
+BUILD_CC = @BUILD_CC@
+CFLAGS = @CFLAGS@
 AR = @AR@
 RANLIB = @RANLIB@
 AS = $(CC) -c
@@ -36,5 +56,9 @@ AS = $(CC) -c
 INSTALL = @INSTALL@
 INSTALL_PROGRAM = @INSTALL_PROGRAM@
 INSTALL_DATA = @INSTALL_DATA@
+LN_S = @LN_S@
+MSGFMT = @MSGFMT@
+BASH = @BASH@
+KSH = @KSH@
 
 # More variables may be inserted below by configure.

config.sub

@@ -1,9 +1,9 @@
 #! /bin/sh
 # Configuration validation subroutine script, version 1.1.
-#   Copyright (C) 1991, 1992, 1993, 1994, 1995 Free Software Foundation, Inc.
+#   Copyright (C) 1991, 92, 93, 94, 95, 1996 Free Software Foundation, Inc.
 # This file is (in principle) common to ALL GNU software.
 # The presence of a machine in this file suggests that SOME GNU software
-# can handle that machine.  It does not imply ALL GNU software can. 
+# can handle that machine.  It does not imply ALL GNU software can.
 #
 # This file is free software; you can redistribute it and/or modify
 # it under the terms of the GNU General Public License as published by
@@ -41,6 +41,8 @@
 # The goal of this file is to map all the various variations of a given
 # machine specification into a single specification in the form:
 #	CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM
+# or in some cases, the newer four-part form:
+#	CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM
 # It is wrong to echo any other type of specification.
 
 if [ x$1 = x ]
@@ -62,11 +64,21 @@ case $1 in
 	;;
 esac
 
-# Separate what the user gave into CPU-COMPANY and OS (if any).
-basic_machine=`echo $1 | sed 's/-[^-]*$//'`
-if [ $basic_machine != $1 ]
-then os=`echo $1 | sed 's/.*-/-/'`
-else os=; fi
+# Separate what the user gave into CPU-COMPANY and OS or KERNEL-OS (if any).
+# Here we must recognize all the valid KERNEL-OS combinations.
+maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'`
+case $maybe_os in
+  linux-gnu*)
+    os=-$maybe_os
+    basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`
+    ;;
+  *)
+    basic_machine=`echo $1 | sed 's/-[^-]*$//'`
+    if [ $basic_machine != $1 ]
+    then os=`echo $1 | sed 's/.*-/-/'`
+    else os=; fi
+    ;;
+esac
 
 ### Let's recognize common machines as not being operating systems so
 ### that things like config.sub decstation-3100 work.  We also
@@ -81,38 +93,43 @@ case $os in
 	-unicom* | -ibm* | -next | -hp | -isi* | -apollo | -altos* | \
 	-convergent* | -ncr* | -news | -32* | -3600* | -3100* | -hitachi* |\
 	-c[123]* | -convex* | -sun | -crds | -omron* | -dg | -ultra | -tti* | \
-	-harris | -dolphin | -highlevel | -gould | -cbm | -ns | -masscomp )
+	-harris | -dolphin | -highlevel | -gould | -cbm | -ns | -masscomp | \
+	-apple)
 		os=
 		basic_machine=$1
 		;;
 	-hiux*)
 		os=-hiuxwe2
 		;;
+	-sco5)
+		os=sco3.2v5
+		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+		;;
 	-sco4)
 		os=-sco3.2v4
-		basic_machine=`echo $1 | sed -e 's/86-.*/86-unknown/'`
+		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
 		;;
 	-sco3.2.[4-9]*)
 		os=`echo $os | sed -e 's/sco3.2./sco3.2v/'`
-		basic_machine=`echo $1 | sed -e 's/86-.*/86-unknown/'`
+		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
 		;;
 	-sco3.2v[4-9]*)
 		# Don't forget version if it is 3.2v4 or newer.
-		basic_machine=`echo $1 | sed -e 's/86-.*/86-unknown/'`
+		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
 		;;
 	-sco*)
 		os=-sco3.2v2
-		basic_machine=`echo $1 | sed -e 's/86-.*/86-unknown/'`
+		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
 		;;
 	-isc)
 		os=-isc2.2
-		basic_machine=`echo $1 | sed -e 's/86-.*/86-unknown/'`
+		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
 		;;
 	-clix*)
 		basic_machine=clipper-intergraph
 		;;
 	-isc*)
-		basic_machine=`echo $1 | sed -e 's/86-.*/86-unknown/'`
+		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
 		;;
 	-lynx*)
 		os=-lynxos
@@ -123,21 +140,30 @@ case $os in
 	-windowsnt*)
 		os=`echo $os | sed -e 's/windowsnt/winnt/'`
 		;;
+	-psos*)
+		os=-psos
+		;;
 esac
 
 # Decode aliases for certain CPU-COMPANY combinations.
 case $basic_machine in
 	# Recognize the basic CPU types without company name.
 	# Some are omitted here because they have special meanings below.
-	tahoe | i[3456]86 | i860 | m68k | m68000 | m88k | ns32k | arm \
+	tahoe | i860 | m68k | m68000 | m88k | ns32k | arm \
 		| arme[lb] | pyramid \
-		| tron | a29k | 580 | i960 | h8300 | hppa1.0 | hppa1.1 \
-		| alpha | we32k | ns16k | clipper | sparclite | i370 | sh \
-		| powerpc | powerpcle | sparc64 | 1750a | dsp16xx | mips64 | mipsel \
+		| tron | a29k | 580 | i960 | h8300 | hppa | hppa1.0 | hppa1.1 \
+		| alpha | we32k | ns16k | clipper | i370 | sh \
+		| powerpc | powerpcle | 1750a | dsp16xx | mips64 | mipsel \
 		| pdp11 | mips64el | mips64orion | mips64orionel \
-		| sparc)
+		| sparc | sparclet | sparclite | sparc64)
 		basic_machine=$basic_machine-unknown
 		;;
+	# We use `pc' rather than `unknown'
+	# because (1) that's what they normally are, and
+	# (2) the word "unknown" tends to confuse beginning users.
+	i[3456]86)
+	  basic_machine=$basic_machine-pc
+	  ;;
 	# Object if more than one company name word.
 	*-*-*)
 		echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2
@@ -148,10 +174,10 @@ case $basic_machine in
 	      | sparc-* | ns32k-* | fx80-* | arm-* | c[123]* \
 	      | mips-* | pyramid-* | tron-* | a29k-* | romp-* | rs6000-* | power-* \
 	      | none-* | 580-* | cray2-* | h8300-* | i960-* | xmp-* | ymp-* \
-	      | hppa1.0-* | hppa1.1-* | alpha-* | we32k-* | cydra-* | ns16k-* \
+	      | hppa-* | hppa1.0-* | hppa1.1-* | alpha-* | we32k-* | cydra-* | ns16k-* \
 	      | pn-* | np1-* | xps100-* | clipper-* | orion-* | sparclite-* \
 	      | pdp11-* | sh-* | powerpc-* | powerpcle-* | sparc64-* | mips64-* | mipsel-* \
-	      | mips64el-* | mips64orion-* | mips64orionel-*)
+	      | mips64el-* | mips64orion-* | mips64orionel-* | f301-*)
 		;;
 	# Recognize the various machine names and aliases which stand
 	# for a CPU type and a company and sometimes even an OS.
@@ -190,6 +216,10 @@ case $basic_machine in
 		basic_machine=m68k-apollo
 		os=-sysv
 		;;
+	aux)
+		basic_machine=m68k-apple
+		os=-aux
+		;;
 	balance)
 		basic_machine=ns32k-sequent
 		os=-dynix
@@ -222,6 +252,10 @@ case $basic_machine in
 		basic_machine=cray2-cray
 		os=-unicos
 		;;
+	[ctj]90-cray)
+		basic_machine=c90-cray
+		os=-unicos
+		;;
 	crds | unos)
 		basic_machine=m68k-crds
 		;;
@@ -303,25 +337,28 @@ case $basic_machine in
 	hp9k8[0-9][0-9] | hp8[0-9][0-9])
 		basic_machine=hppa1.0-hp
 		;;
+	hppa-next)
+		os=-nextstep3
+		;;
 	i370-ibm* | ibm*)
 		basic_machine=i370-ibm
 		os=-mvs
 		;;
 # I'm not sure what "Sysv32" means.  Should this be sysv3.2?
 	i[3456]86v32)
-		basic_machine=`echo $1 | sed -e 's/86.*/86-unknown/'`
+		basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
 		os=-sysv32
 		;;
 	i[3456]86v4*)
-		basic_machine=`echo $1 | sed -e 's/86.*/86-unknown/'`
+		basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
 		os=-sysv4
 		;;
 	i[3456]86v)
-		basic_machine=`echo $1 | sed -e 's/86.*/86-unknown/'`
+		basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
 		os=-sysv
 		;;
 	i[3456]86sol2)
-		basic_machine=`echo $1 | sed -e 's/86.*/86-unknown/'`
+		basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
 		os=-solaris2
 		;;
 	iris | iris4d)
@@ -352,6 +389,14 @@ case $basic_machine in
 	miniframe)
 		basic_machine=m68000-convergent
 		;;
+	mipsel*-linux*)
+		basic_machine=mipsel-unknown
+		os=-linux
+		;;
+	mips*-linux*)
+		basic_machine=mips-unknown
+		os=-linux
+		;;
 	mips3*-*)
 		basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`
 		;;
@@ -540,6 +585,9 @@ case $basic_machine in
 		basic_machine=vax-dec
 		os=-vms
 		;;
+       vpp*|vx|vx-*)
+               basic_machine=f301-fujitsu
+               ;;
 	vxworks960)
 		basic_machine=i960-wrs
 		os=-vxworks
@@ -567,7 +615,11 @@ case $basic_machine in
 # Here we handle the default manufacturer of certain CPU types.  It is in
 # some cases the only manufacturer, in others, it is the most popular.
 	mips)
-		basic_machine=mips-mips
+		if [ x$os = x-linux ]; then
+			basic_machine=mips-unknown
+		else
+			basic_machine=mips-mips
+		fi
 		;;
 	romp)
 		basic_machine=romp-ibm
@@ -619,6 +671,8 @@ esac
 if [ x"$os" != x"" ]
 then
 case $os in
+        # First match some system type aliases
+        # that might get confused with valid system types.
 	# -solaris* is a basic system type, with this one exception.
 	-solaris1 | -solaris1.*)
 		os=`echo $os | sed -e 's|solaris1|sunos4|'`
@@ -630,24 +684,29 @@ case $os in
 		os=-sysv4
 		;;
 	-gnu/linux*)
-		os=`echo $os | sed -e 's|gnu/linux|linux|'`
+		os=`echo $os | sed -e 's|gnu/linux|linux-gnu|'`
 		;;
 	# First accept the basic system types.
 	# The portable systems comes first.
 	# Each alternative MUST END IN A *, to match a version number.
 	# -sysv* is not here because it comes later, after sysvr4.
 	-gnu* | -bsd* | -mach* | -minix* | -genix* | -ultrix* | -irix* \
-	      | -vms* | -sco* | -esix* | -isc* | -aix* | -sunos | -sunos[3456]* \
+	      | -*vms* | -sco* | -esix* | -isc* | -aix* | -sunos | -sunos[34]*\
 	      | -hpux* | -unos* | -osf* | -luna* | -dgux* | -solaris* | -sym* \
 	      | -amigados* | -msdos* | -newsos* | -unicos* | -aof* | -aos* \
-	      | -nindy* | -vxworks* | -ebmon* | -hms* | -mvs* | -clix* \
-	      | -riscos* | -linux* | -uniplus* | -iris* | -rtu* | -xenix* \
-	      | -hiux* | -386bsd* | -netbsd* | -freebsd* | -riscix* \
+	      | -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \
+	      | -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \
+	      | -hiux* | -386bsd* | -netbsd* | -openbsd* | -freebsd* | -riscix* \
 	      | -lynxos* | -bosx* | -nextstep* | -cxux* | -aout* | -elf* \
 	      | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \
-	      | -udi* | -eabi* | -lites* | -ieee*)
+	      | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \
+	      | -cygwin32* | -pe* | -psos* | -moss* | -proelf* | -rtems* \
+	      | -linux-gnu* | -uxpv*)
 	# Remember, each alternative MUST END IN *, to match a version number.
 		;;
+	-linux*)
+		os=`echo $os | sed -e 's|linux|linux-gnu|'`
+		;;
 	-sunos5*)
 		os=`echo $os | sed -e 's|sunos5|solaris2|'`
 		;;
@@ -672,6 +731,9 @@ case $os in
 	-ctix* | -uts*)
 		os=-sysv
 		;;
+	-ns2 )
+	        os=-nextstep2
+		;;
 	# Preserve the version number of sinix5.
 	-sinix5.*)
 		os=`echo $os | sed -e 's|sinix|sysv|'`
@@ -779,6 +841,9 @@ case $basic_machine in
 	m88k-omron*)
 		os=-luna
 		;;
+	*-next )
+		os=-nextstep
+		;;
 	*-sequent)
 		os=-ptx
 		;;
@@ -812,6 +877,9 @@ case $basic_machine in
 	*-masscomp)
 		os=-rtu
 		;;
+	f301-fujitsu)
+		os=-uxpv
+		;;
 	*)
 		os=-none
 		;;
@@ -830,9 +898,6 @@ case $basic_machine in
 			-sunos*)
 				vendor=sun
 				;;
-			-lynxos*)
-				vendor=lynx
-				;;
 			-aix*)
 				vendor=ibm
 				;;
@@ -860,9 +925,12 @@ case $basic_machine in
 			-ptx*)
 				vendor=sequent
 				;;
-			-vxworks*)
+			-vxsim* | -vxworks*)
 				vendor=wrs
 				;;
+			-aux*)
+				vendor=apple
+				;;
 		esac
 		basic_machine=`echo $basic_machine | sed "s/unknown/$vendor/"`
 		;;

configure.in

@@ -1,6 +1,6 @@
 Dnl Process this file with autoconf to produce a configure script.
 AC_REVISION([$CVSid$])
-AC_PREREQ(2.4.2)dnl		dnl Minimum Autoconf version required.
+AC_PREREQ(2.11)dnl		dnl Minimum Autoconf version required.
 AC_INIT(features.h)
 AC_CONFIG_HEADER(config.h)
 
@@ -34,7 +34,7 @@ esac
 
 dnl Arguments to specify presence of other packages/features.
 AC_ARG_WITH(fp, dnl
-  --with-fp		  if using floating-point hardware,
+[  --with-fp		  if using floating-point hardware [default=yes]],
 	    with_fp=$withval, with_fp=yes)
 AC_ARG_WITH(gnu-binutils, dnl
   --with-gnu-binutils	  if using GNU binutils (as and ld),
@@ -49,9 +49,6 @@ test $gnu_binutils = yes && gnu_as=yes gnu_ld=yes
 AC_ARG_WITH(elf, dnl
   --with-elf		  if using the ELF object format,
 	    elf=$withval, elf=no)
-AC_ARG_WITH(weak-symbols, dnl
-  --with-weak-symbols	  if weak symbols are available in as and ld,
-	    weak=$withval, weak=no)
 
 AC_ARG_ENABLE(libio, dnl
 [  --enable-libio          build in GNU libio instead of GNU stdio],
@@ -62,19 +59,54 @@ AC_ARG_ENABLE(libio, dnl
 	       fi],
 	      stdio=default)
 
+AC_ARG_ENABLE(sanity-checks, dnl
+[  --disable-sanity-checks really do not use threads (should not be used
+			  except in special situations) [default=yes]],
+              enable_sanity=$enableval, enable_sanity=yes)
+
 dnl Arguments to enable or disable building the shared, profiled, and
 dnl -fomit-frame-pointer libraries.
 AC_ARG_ENABLE(shared, dnl
 [  --enable-shared         build shared library [default=yes if GNU ld & ELF]],
-	    shared=$enableval, shared=default)
+	      shared=$enableval, shared=default)
 AC_ARG_ENABLE(profile, dnl
 [  --enable-profile        build profiled library [default=yes]],
-	    profile=$enableval, profile=yes)
+	      profile=$enableval, profile=yes)
 AC_ARG_ENABLE(omitfp, dnl
-[  --enable-omitfp       build undebuggable optimized library [default=no]],
-	    omitfp=$enableval, omitfp=no)
+[  --enable-omitfp         build undebuggable optimized library [default=no]],
+	      omitfp=$enableval, omitfp=no)
+AC_ARG_ENABLE(bounded, dnl
+[  --enable-bounded        build with runtime bounds checking [default=no]],
+	      bounded=$enableval, bounded=no)
+
+dnl Generic infrastructure for drop-in additions to libc.
+AC_ARG_ENABLE(add-ons, dnl
+[  --enable-add-ons=DIR... configure and build named extra directories],
+   	      [add_ons=`echo "$enableval" | sed 's/,/ /g'`],
+	      [add_ons=])
+AC_CONFIG_SUBDIRS($add_ons)
+add_ons_pfx=
+if test x"$add_ons" != x; then
+  for f in $add_ons; do
+    add_ons_pfx="$add_ons_pfx $f/"
+  done
+fi
 
 AC_CANONICAL_HOST
+
+# The way shlib-versions is used to generate soversions.mk uses a
+# fairly simplistic model for name recognition that can't distinguish
+# i486-pc-linux-gnu fully from i486-pc-gnu.  So we mutate a $host_os
+# of `gnu*' here to be `gnu-gnu*' just so that shlib-versions can
+# tell.  This doesn't get used much beyond that, so it's fairly safe.
+case "$host_os" in
+linux*)
+  ;;
+gnu*)
+  host_os=`echo $host_os | sed -e 's/gnu/gnu-gnu/'`
+  ;;
+esac
+
 # We keep the original values in `$config_*' and never modify them, so we
 # can write them unchanged into config.make.  Everything else uses
 # $machine, $vendor, and $os, and changes them whenever convenient.
@@ -84,17 +116,18 @@ config_machine=$host_cpu config_vendor=$host_vendor config_os=$host_os
 case "$host_os" in
 gnu* | linux* | bsd4.4* | netbsd* | freebsd*)
   # These systems always use GNU tools.
-  gnu_ld=yes gnu_as=yes
+  gnu_ld=yes gnu_as=yes ;;
 esac
 case "$host_os" in
+# i586-linuxaout is mangled into i586-pc-linux-gnuaout
+linux*ecoff* | linux*aout* | gnu*aout* | gnu*ecoff*)
+  ;;
 gnu* | linux* | sysv4* | solaris2*)
-  # These systems always use the ELF format.
+  # These systems (almost) always use the ELF format.
   elf=yes
+  ;;
 esac
 
-# Compute the list of sysdep directories for this configuration.
-sysdep_dir=$srcdir/sysdeps
-AC_CACHE_CHECK(sysdep dirs, libc_cv_sysdirs, [dnl
 machine=$config_machine
 vendor=$config_vendor
 os=$config_os
@@ -104,20 +137,29 @@ changequote(,)dnl
 # Expand the configuration machine name into a subdirectory by architecture
 # type and particular chip.
 case "$machine" in
-a29k | am29000)	machine=a29k ;;
-alpha*)		machine=alpha/$machine ;;
-hppa*)		machine=hppa/$machine ;;
-i[345]86)	machine=i386/$machine ;;
-m680?0)		machine=m68k/$machine ;;
-m68k)		machine=m68k/m68020 ;;
-m88???)		machine=m88k/$machine ;;
-m88k)		machine=m88k/m88100 ;;
-mips*)		machine=mips/$machine ;;
-mips64*)	machine=mips/mips64/$machine ;;
-sparc[6789])	machine=sparc/$machine ;;
-supersparc)	machine=sparc/sparc8 ;;
+a29k | am29000)	base_machine=a29k machine=a29k ;;
+alpha*)		base_machine=alpha machine=alpha/$machine ;;
+arm*)		base_machine=arm machine=arm/$machine ;;
+hppa*)		base_machine=hppa machine=hppa/$machine ;;
+i[3456]86)	base_machine=i386 machine=i386/$machine ;;
+m680?0)		base_machine=m68k machine=m68k/$machine ;;
+m68k)		base_machine=m68k machine=m68k/m68020 ;;
+m88???)		base_machine=m88k machine=m88k/$machine ;;
+m88k)		base_machine=m88k machine=m88k/m88100 ;;
+mips*)		base_machine=mips machine=mips/$machine ;;
+mips64*)	base_machine=mips64 machine=mips/mips64/$machine ;;
+sparc[6789])	base_machine=sparc machine=sparc/$machine ;;
+supersparc)	base_machine=sparc machine=sparc/sparc8 ;;
 esac
+changequote([,])dnl
+AC_SUBST(base_machine)
 
+# Compute the list of sysdep directories for this configuration.
+# This can take a while to compute.
+sysdep_dir=$srcdir/sysdeps
+AC_MSG_CHECKING(sysdep dirs)
+dnl We need to use [ and ] for other purposes for a while now.
+changequote(,)dnl
 # Make sco3.2v4 become sco3.2.4 and sunos4.1.1_U1 become sunos4.1.1.U1.
 os="`echo $os | sed 's/\([0-9A-Z]\)[v_]\([0-9A-Z]\)/\1.\2/g'`"
 
@@ -149,6 +191,11 @@ o=`echo $tail | sed 's/[0-9]*$//'`
 if test $o != $tail; then
   ostry="$ostry /$o"
 fi
+# For linux-gnu, try linux-gnu, then linux.
+o=`echo $tail | sed 's/-.*$//'`
+if test $o != $tail; then
+  ostry="$ostry /$o"
+fi
 
 # For unix/sysv/sysv4, try unix/sysv/sysv4, then unix/sysv, then unix.
 base=
@@ -177,23 +224,34 @@ changequote([,])dnl
 
 # Find what sysdep directories exist.
 sysnames=
-for b in $base ''; do
-  for m0 in $mach ''; do
-    for v in /$vendor ''; do
-      for o in /$ostry ''; do
-	for m in $mach ''; do
-	  try="$m0$b$v$o$m"
-	  test -n "$enable_debug_configure" && echo "$0 [DEBUG]: try $try" >&2
-	  if test -d $sysdep_dir$try; then
-	    sysnames="$sysnames $try"
-	    { test -n "$o" || test -n "$b"; } && os_used=t
-	    { test -n "$m" || test -n "$m0"; } && machine_used=t
-	  fi
+IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:"
+for d in $add_ons_pfx ''; do
+  for b in $base ''; do
+    for m0 in $mach ''; do
+      for v in /$vendor ''; do
+	for o in /$ostry ''; do
+	  for m in $mach ''; do
+	    if test "$m0$b$v$o$m"; then
+	      try="${d}sysdeps$m0$b$v$o$m"
+	      test -n "$enable_debug_configure" &&
+	      echo "$0 [DEBUG]: try $try" >&2
+	      case $try in
+		/*) dest=$try ;;
+		*)  dest=$srcdir/$try ;;
+	      esac
+	      if test -d $dest; then
+		sysnames="$sysnames $try"
+		{ test -n "$o" || test -n "$b"; } && os_used=t
+		{ test -n "$m" || test -n "$m0"; } && machine_used=t
+	      fi
+	    fi
+	  done
 	done
       done
     done
   done
 done
+IFS="$ac_save_ifs"
 
 if test -z "$os_used" && test "$os" != none; then
   AC_MSG_ERROR(Operating system $os is not supported.)
@@ -212,31 +270,56 @@ fi
 # machine (otherwise what's the point of an ABI?).
 if test "$elf" = yes; then
   elf_dirs=
-  for m in $mach; do
-    if test -d $sysdep_dir$m/elf; then
-      elf_dirs="$elf_dirs $m/elf"
-    fi
+  for d in $add_ons_pfx ''; do
+    case $d in
+      /*) xsrcdir= ;;
+      *)  xsrcdir=$srcdir/ ;;
+    esac
+    for m in $mach; do
+      if test -d $xsrcdir${d}sysdeps$m/elf; then
+	elf_dirs="$elf_dirs ${d}sysdeps$m/elf"
+      fi
+    done
   done
-  sysnames="`echo $elf_dirs | sed -e 's,^/,,' -e 's, /,,g'` $sysnames"
+  sysnames="`echo $elf_dirs | sed -e 's,//,/,g'` $sysnames"
 fi
 
 
-# Remove the leading slashes.
-sysnames="`echo $sysnames | sed -e 's@^/@@' -e 's@ /@ @g'`"
-
-
 # Expand the list of system names into a full list of directories
 # from each element's parent name and Implies file (if present).
 set $sysnames
+names=
 while test $# -gt 0; do
   name=$1
   shift
 
-  if test -f $sysdep_dir/$name/Implies; then
+  case " $names " in *" $name "*)
+    # Already in the list.
+    continue
+  esac
+
+  # Report each name as we discover it, so there is no long pause in output.
+  echo $ac_n "$name $ac_c" >&AC_FD_MSG
+
+  name_base=`echo $name | sed -e 's@\(.*sysdeps\)/.*@\1@'`
+
+  case $name in
+    /*) xsrcdir= ;;
+    *)  xsrcdir=$srcdir/ ;;
+  esac
+  test -n "$enable_debug_configure" &&
+  echo "[DEBUG]: name/Implies $xsrcdir$name/Implies" >&2
+
+  if test -f $xsrcdir$name/Implies; then
     # Collect more names from the `Implies' file (removing comments).
-    implied="`sed 's/#.*$//' < $sysdep_dir/$name/Implies`"
-    for x in $implied; do
-      test -d $sysdep_dir/$x || echo "Warning: $name implies nonexistent $x">&2
+    implied_candidate="`sed 's/#.*$//' < $xsrcdir$name/Implies`"
+    implied=
+    for x in $implied_candidate; do
+      if test -d $xsrcdir$name_base/$x; then
+	implied="$implied $name_base/$x";
+      else
+        AC_MSG_WARN($name/Implies specifies nonexistent $x)
+      fi
     done
   else
     implied=
@@ -247,7 +330,7 @@ while test $# -gt 0; do
 
   # Find the parent of NAME, using the empty string if it has none.
 changequote(,)dnl
-  parent="`echo $name | sed -n -e '/\//!q' -e 's=/[^/]*$==p'`"
+  parent="`echo $name | sed -n -e 's=/[^/]*$==' -e '/sysdeps$/q' -e p`"
 changequote([,])dnl
 
   # Add the names implied by NAME, and NAME's parent (if it has one), to
@@ -262,39 +345,55 @@ changequote([,])dnl
 done
 
 # Add the default directories.
-names="$names generic stub"
+sysnames="$names sysdeps/generic sysdeps/stub"
+AC_SUBST(sysnames)
+# The other names were emitted during the scan.
+AC_MSG_RESULT(sysdeps/generic sysdeps/stub)
 
-# Now uniquize the list.
-seen=
-sysnames=
-for name in $names; do
-  if echo "$seen" | fgrep -x $name >/dev/null; then
-    # Already in the list.
-    true;
-  else
-    # A new one.
-    if test -z "$seen"; then
-      seen="$name" sysnames="$name"
-    else
-      seen="$seen
-$name"
-      sysnames="$sysnames $name"
-    fi
-  fi
-done
-libc_cv_sysdirs="$sysnames"])
-AC_SUBST(sysnames) sysnames="$libc_cv_sysdirs"
+
+### Locate tools.
 
 AC_PROG_INSTALL
-if test "$INSTALL" = "${srcdir}/install-sh"; then
+if test "$INSTALL" = "${srcdir}/install-sh -c"; then
   # The makefiles need to use a different form to find it in $srcdir.
-  INSTALL='$(..)./install-sh'
+  INSTALL='$(..)./install-sh -c'
 fi
+AC_PROG_LN_S
+AC_CHECK_PROGS(MSGFMT, msgfmt gmsgfmt, :)
 
-AC_CHECK_TOOL(CC, gcc)
+AC_PROG_CC
+AC_CANONICAL_BUILD
+if test $host != $build; then
+  AC_CHECK_PROGS(BUILD_CC, gcc cc)
+fi
+AC_SUBST(cross_compiling)
+AC_PROG_CPP
 AC_CHECK_TOOL(AR, ar)
 AC_CHECK_TOOL(RANLIB, ranlib, :)
-AC_PROG_CPP
+
+AC_PATH_PROG(BASH, bash, no)
+if test "$BASH" != no &&
+   $BASH -c 'test "$BASH_VERSINFO" -ge 2 >&/dev/null'; then
+  libc_cv_have_bash2=yes
+else
+  libc_cv_have_bash2=no
+fi
+AC_SUBST(libc_cv_have_bash2)
+
+dnl We need a ksh compatible shell for tzselect.
+if test "$BASH" = no; then
+  AC_PATH_PROG(KSH, ksh, no)
+  if test "$KSH" = no; then
+    libc_cv_have_ksh=no
+  else
+    libc_cv_have_ksh=yes
+  fi
+else
+  KSH="$BASH"
+  AC_SUBST(KSH)
+  libc_cv_have_ksh=yes
+fi
+AC_SUBST(libc_cv_have_ksh)
 
 AC_CACHE_CHECK(for signed size_t type, libc_cv_signed_size_t, [dnl
 echo '#include <stddef.h>
@@ -394,10 +493,93 @@ if test $libc_cv_asm_set_directive = yes; then
   AC_DEFINE(HAVE_ASM_SET_DIRECTIVE)
 fi
 
+AC_CACHE_CHECK(for .symver assembler directive, libc_cv_asm_symver_directive,
+[cat > conftest.s <<EOF
+.text
+_sym:
+.symver _sym,sym@VERS
+EOF
+if ${CC-cc} -c $CFLAGS $CPPFLAGS conftest.s 1>&AC_FD_CC 2>&AC_FD_CC; then
+  libc_cv_asm_symver_directive=yes
+else
+  libc_cv_asm_symver_directive=no
+fi
+rm -f conftest*])
+AC_CACHE_CHECK(for ld --version-script, libc_cv_ld_version_script_option, [dnl
+if test $libc_cv_asm_symver_directive = yes; then
+  cat > conftest.s <<EOF
+.text
+_sym:
+.symver _sym,sym@VERS
+EOF
+  cat > conftest.map <<EOF
+VERS {
+	global: sym;
+};
+EOF
+  if ${CC-cc} -c $CFLAGS $CPPFLAGS conftest.s 1>&AC_FD_CC 2>&AC_FD_CC; then
+    if AC_TRY_COMMAND([${CC-cc} $CFLAGS --shared -o conftest.so conftest.o
+					-Wl,--version-script,conftest.map]);
+    then
+      libc_cv_ld_version_script_option=yes
+    else
+      libc_cv_ld_version_script_option=no
+    fi
+  else
+    libc_cv_ld_version_script_option=no
+  fi
+else
+  libc_cv_ld_version_script_option=no
+fi
+rm -f conftest*])
+if test $libc_cv_asm_symver_directive = yes &&
+   test $libc_cv_ld_version_script_option = yes; then
+  VERSIONING=yes
+  AC_DEFINE(DO_VERSIONING)
+else
+  VERSIONING=no
+fi
+AC_SUBST(VERSIONING)
+
+if test $elf = yes; then
+  AC_CACHE_CHECK(for .previous assembler directive,
+		 libc_cv_asm_previous_directive, [dnl
+  cat > conftest.s <<EOF
+.section foo_section
+.previous
+EOF
+  if AC_TRY_COMMAND(${CC-cc} -c $CFLAGS conftest.s 1>&AC_FD_CC); then
+    libc_cv_asm_previous_directive=yes
+  else
+    libc_cv_asm_previous_directive=no
+  fi
+  rm -f conftest*])
+  if test $libc_cv_asm_previous_directive = yes; then
+    AC_DEFINE(HAVE_ASM_PREVIOUS_DIRECTIVE)
+  else
+    AC_CACHE_CHECK(for .popsection assembler directive,
+		   libc_cv_asm_popsection_directive, [dnl
+    cat > conftest.s <<EOF
+.pushsection foo_section
+.popsection
+EOF
+    if AC_TRY_COMMAND(${CC-cc} -c $CFLAGS conftest.s 1>&AC_FD_CC); then
+      libc_cv_asm_popsection_directive=yes
+    else
+      libc_cv_asm_popsection_directive=no
+    fi
+    rm -f conftest*])
+    if test $libc_cv_asm_popsection_directive = yes; then
+      AC_DEFINE(HAVE_ASM_POPSECTION_DIRECTIVE)
+    fi
+  fi
+fi
+
 if test $elf != yes; then
   AC_CACHE_CHECK(for .init and .fini sections, libc_cv_have_initfini,
 		 [AC_TRY_COMPILE(, [asm (".section .init");
-				    asm (".section .fini");],
+				    asm (".section .fini");
+				    asm (".text");],
 				 libc_cv_have_initfini=yes,
 				 libc_cv_have_initfini=no)])
   AC_SUBST(libc_cv_have_initfini)dnl
@@ -406,6 +588,103 @@ if test $elf != yes; then
   fi
 fi
 
+if test $elf = yes; then
+  libc_cv_asm_underscores=no
+else
+  AC_CACHE_CHECK(for _ prefix on C symbol names, libc_cv_asm_underscores,
+		 [AC_TRY_LINK([asm ("_glibc_foobar:");], [glibc_foobar ();],
+			      libc_cv_asm_underscores=yes,
+			      libc_cv_asm_underscores=no)])
+fi
+if test $libc_cv_asm_underscores = no; then
+  AC_DEFINE(NO_UNDERSCORES)
+fi
+
+if test $elf = yes; then
+  libc_cv_weak_symbols=yes
+  libc_cv_asm_weak_directive=yes
+  libc_cv_asm_weakext_directive=no
+else
+  AC_CACHE_CHECK(for assembler .weak directive, libc_cv_asm_weak_directive,
+		 [dnl
+cat > conftest.s <<EOF
+.text
+${libc_cv_asm_global_directive} foo
+foo: .long 0
+.weak foo
+.weak bar; bar = foo
+EOF
+  if ${CC-cc} $CFLAGS -c conftest.s 2>/dev/null; then
+    libc_cv_asm_weak_directive=yes
+  else
+    libc_cv_asm_weak_directive=no
+  fi
+  rm -f conftest*])
+
+if test $libc_cv_asm_weak_directive = no; then
+  AC_CACHE_CHECK(for assembler .weakext directive,
+		 libc_cv_asm_weakext_directive,
+		 [dnl
+cat > conftest.s <<EOF
+.text
+${libc_cv_asm_global_directive} foo
+foo: .long 0
+.weakext foo
+.weakext foo, bar
+EOF
+  if ${CC-cc} $CFLAGS -c conftest.s 2>/dev/null; then
+    libc_cv_asm_weakext_directive=yes
+  else
+    libc_cv_asm_weakext_directive=no
+  fi
+  rm -f conftest*])
+
+  fi # no .weak
+fi # not ELF
+
+if test $libc_cv_asm_weak_directive = yes; then
+  AC_DEFINE(HAVE_ASM_WEAK_DIRECTIVE)
+elif test $libc_cv_asm_weakext_directive = yes; then
+  AC_DEFINE(HAVE_ASM_WEAKEXT_DIRECTIVE)
+fi
+
+AC_CACHE_CHECK(for ld --no-whole-archive, libc_cv_ld_no_whole_archive, [dnl
+cat > conftest.c <<\EOF
+_start () {}
+int __eh_pc;
+__throw () {}
+EOF
+dnl No \ in command here because it ends up inside ''.
+if AC_TRY_COMMAND([${CC-cc} $CFLAGS
+			    -nostdlib -nostartfiles -Wl,--no-whole-archive
+			    -o conftest conftest.c]); then
+  libc_cv_ld_no_whole_archive=yes
+else
+  libc_cv_ld_no_whole_archive=no
+fi
+rm -f conftest*])
+AC_SUBST(libc_cv_ld_no_whole_archive)dnl
+
+AC_CACHE_CHECK(for gcc -fno-exceptions, libc_cv_gcc_no_exceptions, [dnl
+cat > conftest.c <<\EOF
+_start () {}
+int __eh_pc;
+__throw () {}
+EOF
+dnl No \ in command here because it ends up inside ''.
+if AC_TRY_COMMAND([${CC-cc} $CFLAGS
+			    -nostdlib -nostartfiles -fno-exceptions
+			    -o conftest conftest.c]); then
+  libc_cv_gcc_no_exceptions=yes
+else
+  libc_cv_gcc_no_exceptions=no
+fi
+rm -f conftest*])
+AC_SUBST(libc_cv_gcc_no_exceptions)dnl
+
+### End of automated tests.
+### Now run sysdeps configure fragments.
+
 # sysdeps configure fragments may set these with files to be linked below.
 libc_link_dests=
 libc_link_sources=
@@ -414,14 +693,24 @@ libc_link_sources=
 # configure fragments, and looking for a uname implementation.
 uname=
 for dir in $sysnames; do
-  if test -r $sysdep_dir/$dir/configure; then
-    AC_MSG_RESULT(running configure fragment for $dir)
-    . $sysdep_dir/$dir/configure
+  case $dir in
+    /*) dest=$dir ;;
+    *)  dest=$srcdir/$dir ;;
+  esac
+  if test -r $dest/configure; then
+    AC_MSG_RESULT(running configure fragment for $dest)
+    . $dest/configure
   fi
+[
   if test -z "$uname"; then
-    { test -r $sysdep_dir/$dir/uname.c || test -r $sysdep_dir/$dir/uname.S; } \
-    && uname=$dir
+    if test -r $sysdep_dir/$dir/uname.c ||
+       test -r $sysdep_dir/$dir/uname.S ||
+       { test -r $sysdep_dir/$dir/syscalls.list &&
+	 grep '^uname[ 	]' $sysdep_dir/$dir/syscalls.list >/dev/null; }; then
+      uname=$dir
+    fi
   fi
+]dnl
 done
 
 AC_LINK_FILES(`echo $libc_link_sources`, `echo $libc_link_dests`)
@@ -492,7 +781,13 @@ default) stdio=stdio ;;
 esac
 AC_MSG_RESULT($stdio)
 
-AC_SUBST(gnu_ld) AC_SUBST(gnu_as) AC_SUBST(elf) AC_SUBST(weak)
+AC_SUBST(libc_cv_slibdir)
+AC_SUBST(libc_cv_sysconfdir)
+AC_SUBST(libc_cv_rootsbindir)
+
+AC_SUBST(has_ldconfig)
+
+AC_SUBST(gnu_ld) AC_SUBST(gnu_as) AC_SUBST(elf)
 if test $gnu_ld = yes; then
   AC_DEFINE(HAVE_GNU_LD)
 fi
@@ -502,18 +797,22 @@ fi
 if test $elf = yes; then
   AC_DEFINE(HAVE_ELF)
 fi
-if test $weak = yes; then
-  AC_DEFINE(HAVE_WEAK_SYMBOLS)
-fi
 
 AC_SUBST(shared)
 if test $shared = default; then
   if test $gnu_ld = yes; then
     shared=$elf
+  else
+    # For now we do not assume shared libs are available.  In future more
+    # tests might become available.
+    shared=no
   fi
 fi
 AC_SUBST(profile)
 AC_SUBST(omitfp)
+AC_SUBST(bounded)
+
+AC_SUBST(DEFINES)
 
 if test "`(cd $srcdir; pwd)`" = "`pwd`"; then
   config_makefile=
@@ -521,5 +820,8 @@ else
   config_makefile=Makefile
 fi
 
-AC_OUTPUT(config.make ${config_makefile} ${config_uname}, ,
+VERSION=`sed -e 's/^#define VERSION "\([^"]*\)"/\1/p' -e d < $srcdir/version.h`
+AC_SUBST(VERSION)
+
+AC_OUTPUT(config.make glibcbug ${config_makefile} ${config_uname}, ,
           [echo '$config_vars' >> config.make])

crypt-README

@@ -1,14 +0,0 @@
-The GNU C library now includes Michael Glad's Ultra Fast Crypt, which
-provides the Unix `crypt' function, plus some other entry points.  Because
-of the United States export restriction on DES implementations, we are
-distributing this code separately from the rest of the C library.  There is
-an extra distribution tar file just for crypt; it is called
-`glibc-1.07-crypt.tar.gz'.  You can just unpack the crypt distribution
-along with the rest of the C library and build; you can also build the
-library without getting crypt.  Users outside the USA can get the crypt
-distribution via anonymous FTP from ftp.uni-c.dk [129.142.6.74], or another
-archive site outside the USA.  Archive maintainers are encouraged to copy
-this distribution to their archives outside the USA.  Please get it from
-ftp.uni-c.dk; transferring this distribution from prep.ai.mit.edu (or any
-other site in the USA) to a site outside the USA is in violation of US
-export laws.

csu/.cvsignore

@@ -1,5 +1,7 @@
+*.d *.o *.so *.po *.go stamp.* *.stamp *.ustamp *.udeps
 *.gz *.Z *.tar *.tgz
 =*
 TODO COPYING* AUTHORS copyr-* copying.*
 glibc-*
 distinfo
+specs

csu/Makefile

@@ -1,6 +1,6 @@
 # Makefile for csu code for GNU C library.
 
-# Copyright (C) 1995 Free Software Foundation, Inc.
+# Copyright (C) 1995, 1996, 1997 Free Software Foundation, Inc.
 # This file is part of the GNU C Library.
 
 # The GNU C Library is free software; you can redistribute it and/or
@@ -14,9 +14,9 @@
 # Library General Public License for more details.
 
 # You should have received a copy of the GNU Library General Public
-# License along with the GNU C Library; see the file COPYING.LIB.  If
-# not, write to the Free Software Foundation, Inc., 675 Mass Ave,
-# Cambridge, MA 02139, USA.
+# License along with the GNU C Library; see the file COPYING.LIB.  If not,
+# write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+# Boston, MA 02111-1307, USA.
 
 # This directory contains the C startup code (that which calls main).  This
 # consists of the startfile, built from start.c and installed as crt0.o
@@ -27,6 +27,7 @@
 
 subdir := csu
 
+routines = init-first
 csu-dummies = $(filter-out $(start-installed-name),crt1.o Mcrt1.o)
 extra-objs = start.o gmon-start.o \
 	     $(start-installed-name) g$(start-installed-name) \
@@ -35,27 +36,16 @@ omit-deps = $(patsubst %.o,%,$(start-installed-name) g$(start-installed-name) \
 		             $(csu-dummies))
 install-lib = $(start-installed-name) g$(start-installed-name) \
 	      $(csu-dummies)
-distribute = initfini.c
+distribute = initfini.c gmon-start.c start.c defs.awk abi-note.S abi-tag.h
 
 all: # Make this the default target; it will be defined in Rules.
 
 include ../Makeconfig
 
-ifneq ($(elf),yes)
 
-# When not using ELF, there is just one startfile, called crt0.o.
-start-installed-name = crt0.o
+ifeq ($(have-initfini),yes)
 
-else
-
-# In the ELF universe, crt0.o is called crt1.o, and there are 
-# some additional bizarre files.
-start-installed-name = crt1.o
-have-initfini = yes
-
-endif
-
-ifeq (yes,$(have-initfini))
+CPPFLAGS += -DHAVE_INITFINI
 
 # These are the special initializer/finalizer files.  They are always the
 # first and last file in the link.  crti.o ... crtn.o define the global
@@ -64,45 +54,60 @@ crtstuff = crti crtn
 
 install-lib += $(crtstuff:=.o)
 extra-objs += $(crtstuff:=.o)
-generated += $(crtstuff:=.s)
+generated += $(crtstuff:=.S) initfini.s align.h end.h
 omit-deps += $(crtstuff)
 
-# Compile initfini.c to assembly code, which contains embedded shell
-# commands that prodice crti.s-new and crtn.s-new when run.  We need to
-# disable emission of .size directives and debugging information, since
-# they will get confused by the splitting of the output we do.
-$(objpfx)cr%i.s $(objpfx)cr%n.s: initfini.c; $(initfini)
+# Special rules for the building of crti.o and crtn.o
+$(objpfx)crt%.o: $(objpfx)crt%.S $(objpfx)defs.h
+	$(CC) -c -fPIC -g0 -I$(..) -I$(common-objpfx) -DASSEMBLER $< -o $@
 
-define initfini
--rm -f $(objpfx)crtcommon.tmp
-(echo 'cat > crtcommon.tmp <<\EOF_common'; \
- $(CC) $< $(CPPFLAGS) $(CFLAGS) \
-       -finhibit-size-directive -g0 -S -o -; \
- echo 'EOF_common') | (cd $(@D); $(SHELL))
-cat $(objpfx)crtcommon.tmp >> $(objpfx)crti.s-new
-cat $(objpfx)crtcommon.tmp >> $(objpfx)crtn.s-new
-rm -f $(objpfx)crtcommon.tmp
-mv -f $(objpfx)crti.s-new $(subst crtn,crti,$@)
-mv -f $(objpfx)crtn.s-new $(subst crti,crtn,$@)
-endef
+$(objpfx)initfini.s: initfini.c
+	$(CC) $(CPPFLAGS) $(CFLAGS) -g0 -S -fPIC -finhibit-size-directive \
+              $(no-exceptions) $< -o $@
+
+$(objpfx)crti.S: $(objpfx)initfini.s
+	sed -n -e '1,/@HEADER_ENDS/p' \
+	       -e '/@_.*_PROLOG_BEGINS/,/@_.*_PROLOG_ENDS/p' \
+	       -e '/@TRAILER_BEGINS/,$$p' $< > $@
+
+$(objpfx)crtn.S: $(objpfx)initfini.s
+	sed -n -e '1,/@HEADER_ENDS/p' \
+	       -e '/@_.*_EPILOG_BEGINS/,/@_.*_EPILOG_ENDS/p' \
+	       -e '/@TRAILER_BEGINS/,$$p' $< > $@
+
+$(objpfx)defs.h: $(objpfx)initfini.s
+	sed -n -e '/@TESTS_BEGIN/,/@TESTS_END/p' $< | \
+		awk -f defs.awk > $@
 
 endif
 
 include ../Rules
 
+define link-relocatable
+$(CC) -nostdlib -nostartfiles -r -o $@ $^
+endef
+
 ifndef start-installed-name-rule
+ifeq (yes,$(elf))
+# We link the ELF startfile along with a SHT_NOTE section indicating
+# the the kernel ABI the binaries linked with this library will require.
+$(objpfx)$(start-installed-name): $(objpfx)start.o $(objpfx)abi-note.o
+	$(link-relocatable)
+else
 # The startfile is installed under different names, so we just call our
 # source file `start.c' and copy to the installed name after compiling.
 $(objpfx)$(start-installed-name): $(objpfx)start.o
-	-rm -f $@
+	rm -f $@
 	ln $< $@
 endif
+endif
 
 # The profiling startfile is made by linking together the normal
 # startfile with gmon-start.o, which defines a constructor function
 # to turn on profiling code at startup.
-$(objpfx)g$(start-installed-name): $(objpfx)start.o $(objpfx)gmon-start.o
-	$(CC) -nostdlib -nostartfiles -r -o $@ $^
+$(objpfx)g$(start-installed-name): $(objpfx)$(start-installed-name) \
+				   $(objpfx)gmon-start.o
+	$(link-relocatable)
 
 # These extra files are sometimes expected by system standard linking
 # procedures, but we have nothing for them to do.  So compile empty files.
@@ -110,4 +115,3 @@ $(addprefix $(objpfx),$(filter-out $(start-installed-name),$(csu-dummies))):
 	cp /dev/null $(@:.o=.c)
 	$(COMPILE.c) $(@:.o=.c) $(OUTPUT_OPTION)
 	rm -f $(@:.o=.c)
-

csu/abi-note.S

@@ -0,0 +1,69 @@
+/* Special .init and .fini section support.
+   Copyright (C) 1997 Free Software Foundation, Inc.
+   This file is part of the GNU C Library.
+
+   The GNU C Library is free software; you can redistribute it
+   and/or modify it under the terms of the GNU Library General Public
+   License as published by the Free Software Foundation; either
+   version 2 of the License, or (at your option) any later version.
+
+   In addition to the permissions in the GNU Library General Public
+   License, the Free Software Foundation gives you unlimited
+   permission to link the compiled version of this file with other
+   programs, and to distribute those programs without any restriction
+   coming from the use of this file.  (The Library General Public
+   License restrictions do apply in other respects; for example, they
+   cover modification of the file, and distribution when not linked
+   into another program.)
+
+   The GNU C Library is distributed in the hope that it will be
+   useful, but WITHOUT ANY WARRANTY; without even the implied warranty
+   of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU Library General Public License for more details.
+
+   You should have received a copy of the GNU Library General Public
+   License along with the GNU C Library; see the file COPYING.LIB.  If not,
+   write to the Free Software Foundation, 59 Temple Place - Suite 330,
+   Boston, MA 02111-1307, USA.  */
+
+#include <sysdep.h>
+
+/* The basic layout of note sections is specified by the ELF format.  */
+
+#define ELF_NOTE_BEGIN(sectname, sectflags, type, name)			      \
+	.section sectname, sectflags;					      \
+	.align ALIGNARG(2);	/* Notes are 4-byte aligned.  */	      \
+	.long 1f - 0f;		/* 32-bit word: length of name field */	      \
+	.long 3f - 2f;		/* 32-bit word: length of desc field */	      \
+	.long (type);		/* 32-bit word: vendor-defined type field */  \
+0:	.asciz name;		/* null-terminated string, any length: name */\
+1:	.align ALIGNARG(2);	/* Name data padded to 4-byte alignment.  */  \
+2:	/* Here follows the "note descriptor" data, whose format	      \
+	   is not specified by ELF.  The vendor name and type field	      \
+	   indicate what sort of data is found here.  */
+
+#define ELF_NOTE_END							      \
+3:	.align ALIGNARG(2)	/* Pad to 4-byte align the next note.  */
+
+
+/* The linker (GNU ld 2.8 and later) recognize an allocated section whose
+   name begins with `.note' and creates a PT_NOTE program header entry
+   pointing at it.
+
+   Such a program header is the canonical way (at least in the free OS
+   community) to identify the OS environment ABI that the executable was
+   created for.  The ELF note information identifies a particular OS or
+   coordinated development effort within which the ELF header's e_machine
+   value plus (for dynamically linked programs) the PT_INTERP dynamic
+   linker name and DT_NEEDED shared library names fully identify the
+   runtime environment required by an executable.
+
+   The GNU project and cooperating development efforts (including the Linux
+   community) use a vendor name string of "GNU", and a note type field with
+   value 1 for a note descriptor that indicates ABI requirements.  */
+
+#include <abi-tag.h>		/* OS-specific ABI tag value */
+
+ELF_NOTE_BEGIN(".note.ABI-tag", "a", 1, "GNU")
+	.long ABI_TAG
+ELF_NOTE_END

csu/defs.awk

@@ -0,0 +1,22 @@
+/.end/	 { need_end = 1 }
+/.align/ { if($2 > max) max = $2; }
+
+END {
+    if(need_end)
+    {
+	print "#define END_INIT .end _init";
+	print "#define END_FINI .end _fini";
+    }
+    else
+    {
+	print "#define END_INIT";
+	print "#define END_FINI";
+    }
+    if(max)
+	print "#define ALIGN .align", max;
+    else
+	print "#define ALIGN";
+
+    print "#include <libc-symbols.h>";
+    print "weak_extern (__gmon_start__)";
+}

csu/gmon-start.c

@@ -1,21 +1,21 @@
 /* Code to enable profiling at program startup.
-Copyright (C) 1995 Free Software Foundation, Inc.
-This file is part of the GNU C Library.
+   Copyright (C) 1995, 1996 Free Software Foundation, Inc.
+   This file is part of the GNU C Library.
 
-The GNU C Library is free software; you can redistribute it and/or
-modify it under the terms of the GNU Library General Public License as
-published by the Free Software Foundation; either version 2 of the
-License, or (at your option) any later version.
+   The GNU C Library is free software; you can redistribute it and/or
+   modify it under the terms of the GNU Library General Public License as
+   published by the Free Software Foundation; either version 2 of the
+   License, or (at your option) any later version.
 
-The GNU C Library is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-Library General Public License for more details.
+   The GNU C Library is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+   Library General Public License for more details.
 
-You should have received a copy of the GNU Library General Public
-License along with the GNU C Library; see the file COPYING.LIB.  If
-not, write to the Free Software Foundation, Inc., 675 Mass Ave,
-Cambridge, MA 02139, USA.  */
+   You should have received a copy of the GNU Library General Public
+   License along with the GNU C Library; see the file COPYING.LIB.  If not,
+   write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+   Boston, MA 02111-1307, USA.  */
 
 #include <sys/types.h>
 #include <sys/gmon.h>
@@ -23,25 +23,36 @@ Cambridge, MA 02139, USA.  */
 #include <unistd.h>
 
 /* Beginning and end of our code segment.  */
-extern void _start (), etext ();
-
-/* These functions are defined in gmon/gmon.c;
-   they do all the work of setting up and cleaning up profiling.  */
-extern void monstartup (u_long, u_long);
-extern void _mcleanup (void);
+extern void _start (void), etext (void);
 
+#ifndef HAVE_INITFINI
 /* This function gets called at startup by the normal constructor
    mechanism.  We link this file together with start.o to produce gcrt1.o,
    so this constructor will be first in the list.  */
-static void gmon_start (void) __attribute__ ((constructor));
-static void
-gmon_start (void)
+
+void __gmon_start__ (void) __attribute__ ((constructor));
+#else
+/* In ELF and COFF, we cannot use the normal constructor mechanism to call
+   __gmon_start__ because gcrt1.o appears before crtbegin.o in the link.
+   Instead crti.o calls it specially (see initfini.c).  */
+#endif
+
+void
+__gmon_start__ (void)
 {
+#ifdef HAVE_INITFINI
+  /* Protect from being called more than once.  Since crti.o is linked
+     into every shared library, each of their init functions will call us.  */
+  static int called;
+
+  if (called++)
+    return;
+#endif
+
   /* Start keeping profiling records.  */
   monstartup ((u_long) &_start, (u_long) &etext);
 
-  /* Call _mcleanup before exitting; it will write out gmon.out from the
+  /* Call _mcleanup before exiting; it will write out gmon.out from the
      collected data.  */
   atexit (&_mcleanup);
 }
-

csu/initfini.c

@@ -1,98 +1,121 @@
 /* Special .init and .fini section support.
-Copyright (C) 1995 Free Software Foundation, Inc.
-This file is part of the GNU C Library.
+   Copyright (C) 1995, 1996, 1997 Free Software Foundation, Inc.
+   This file is part of the GNU C Library.
 
-The GNU C Library is free software; you can redistribute it and/or
-modify it under the terms of the GNU Library General Public License as
-published by the Free Software Foundation; either version 2 of the
-License, or (at your option) any later version.
+   The GNU C Library is free software; you can redistribute it
+   and/or modify it under the terms of the GNU Library General Public
+   License as published by the Free Software Foundation; either
+   version 2 of the License, or (at your option) any later version.
 
-The GNU C Library is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-Library General Public License for more details.
+   In addition to the permissions in the GNU Library General Public
+   License, the Free Software Foundation gives you unlimited
+   permission to link the compiled version of this file with other
+   programs, and to distribute those programs without any restriction
+   coming from the use of this file.  (The Library General Public
+   License restrictions do apply in other respects; for example, they
+   cover modification of the file, and distribution when not linked
+   into another program.)
 
-You should have received a copy of the GNU Library General Public
-License along with the GNU C Library; see the file COPYING.LIB.  If
-not, write to the Free Software Foundation, Inc., 675 Mass Ave,
-Cambridge, MA 02139, USA.  */
+   The GNU C Library is distributed in the hope that it will be
+   useful, but WITHOUT ANY WARRANTY; without even the implied warranty
+   of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU Library General Public License for more details.
 
-/* This file is compiled into assembly code which is then surrounded by the
-   lines `cat > crtcommon.tmp <<\EOF_common' and `EOF_common' and thus
-   becomes a shell script which creates three files of assembly code.
+   You should have received a copy of the GNU Library General Public
+   License along with the GNU C Library; see the file COPYING.LIB.  If not,
+   write to the Free Software Foundation, 59 Temple Place - Suite 330,
+   Boston, MA 02111-1307, USA.  */
 
-   * The first file is crti.s-new; this puts a function prologue at the
-   beginning of the .init and .fini sections and defines global symbols for
+/* This file is compiled into assembly code which is then munged by a sed
+   script into two files: crti.s and crtn.s.
+
+   * crti.s puts a function prologue at the beginning of the
+   .init and .fini sections and defines global symbols for
    those addresses, so they can be called as functions.
 
-   * The second file is crtn.s-new; this puts the corresponding function
-   epilogues in the .init and .fini sections.
-
-   * The third file is crtcommon.tmp, which is whatever miscellaneous cruft
-   the compiler generated at the end; it should be appended to both crti.s-new
-   and crtn.s-new.  */
+   * crtn.s puts the corresponding function epilogues
+   in the .init and .fini sections. */
 
 #include <stdlib.h>
 
+/* We use embedded asm for .section unconditionally, as this makes it
+   easier to insert the necessary directives into crtn.S. */
+#define SECTION(x) asm (".section \"" x "\"");
 
-#ifdef HAVE_ELF
-/* These declarations make the functions go in the right sections when
-   we define them below.  GCC syntax does not allow the attribute
-   specifications to be in the function definitions themselves.  */
-void _init (void) __attribute__ ((section (".init")));
-void _fini (void) __attribute__ ((section (".fini")));
+/* Embed an #include to pull in the alignment and .end directives. */
+asm ("\n#include \"defs.h\"");
 
-#define SECTION(x)		/* Put nothing extra before the defn.  */
+/* The initial common code ends here. */
+asm ("\n/*@HEADER_ENDS*/");
 
-#else
-/* Some non-ELF systems support .init and .fini sections,
-   but the __attribute__ syntax only works for ELF.  */
-#define SECTION(x) asm (".section " x);
-#endif
+/* To determine whether we need .end and .align: */
+asm ("\n/*@TESTS_BEGIN*/");
+void
+dummy (void (*foo) (void))
+{
+  if (foo)
+    (*foo) ();
+}
+asm ("\n/*@TESTS_END*/");
 
-/* End the here document containing the initial common code.
-   Then move the output file crtcommon.tmp to crti.s-new and crtn.s-new.  */
-asm ("\nEOF_common\n\
-rm -f crti.s-new crtn.s-new\n\
-mv crtcommon.tmp crti.s-new\n\
-cp crti.s-new crtn.s-new");
+/* The beginning of _init:  */
+asm ("\n/*@_init_PROLOG_BEGINS*/");
 
-/* Append the .init prologue to crti.s-new.  */
-asm ("cat >> crti.s-new <<\\EOF.crti.init");
 SECTION (".init")
 void
 _init (void)
 {
-  /* End the here document containing the .init prologue code.
-     Then fetch the .section directive just written and append that
-     to crtn.s-new, followed by the function epilogue.  */
-  asm ("\nEOF.crti.init
-\n\
-	fgrep .init crti.s-new >>crtn.s-new\n\
-	cat >> crtn.s-new <<\\EOF.crtn.init");
-}
+  /* We cannot use the normal constructor mechanism in gcrt1.o because it
+     appears before crtbegin.o in the link, so the header elt of .ctors
+     would come after the elt for __gmon_start__.  One approach is for
+     gcrt1.o to reference a symbol which would be defined by some library
+     module which has a constructor; but then user code's constructors
+     would come first, and not be profiled.  */
+  extern void __gmon_start__ (void) __attribute__ ((weak)); /*weak_extern (__gmon_start__);*/
 
-/* End the here document containing the .init epilogue code.
-   Then append the .fini prologue to crti.s-new.  */
-asm ("\nEOF.crtn.init\
-\n\
-cat >> crti.s-new <<\\EOF.crti.fini");
+  if (__gmon_start__)
+    __gmon_start__ ();
+
+  asm ("ALIGN");
+  asm("END_INIT");
+  /* Now the epilog. */
+  asm ("\n/*@_init_PROLOG_ENDS*/");
+  asm ("\n/*@_init_EPILOG_BEGINS*/");
+  SECTION(".init");
+}
+asm ("END_INIT");
+
+/* End of the _init epilog, beginning of the _fini prolog. */
+asm ("\n/*@_init_EPILOG_ENDS*/");
+asm ("\n/*@_fini_PROLOG_BEGINS*/");
 
 SECTION (".fini")
 void
 _fini (void)
 {
-  /* End the here document containing the .fini prologue code.
-     Then fetch the .section directive just written and append that
-     to crtn.s-new, followed by the function epilogue.  */
-  asm ("\nEOF.crti.fini\
-\n\
-	fgrep .fini crti.s-new >>crtn.s-new\n\
-	cat >> crtn.s-new <<\\EOF.crtn.fini");
-}
 
-/* End the here document containing the .fini epilogue code.
-   Finally, put the remainder of the generated assembly into crtcommon.tmp.  */
-asm ("\nEOF.crtn.fini\
-\n\
-cat > crtcommon.tmp <<\\EOF_common");
+  /* End of the _fini prolog. */
+  asm ("ALIGN");
+  asm ("END_FINI");
+  asm ("\n/*@_fini_PROLOG_ENDS*/");
+
+  {
+    /* Let GCC know that _fini is not a leaf function by having a dummy
+       function call here.  We arrange for this call to be omitted from
+       either crt file.  */
+    extern void i_am_not_a_leaf (void);
+    i_am_not_a_leaf ();
+  }
+
+  /* Beginning of the _fini epilog. */
+  asm ("\n/*@_fini_EPILOG_BEGINS*/");
+  SECTION (".fini");
+}
+asm ("END_FINI");
+
+/* End of the _fini epilog.  Any further generated assembly (e.g. .ident)
+   is shared between both crt files. */
+asm ("\n/*@_fini_EPILOG_ENDS*/");
+asm ("\n/*@TRAILER_BEGINS*/");
+
+/* End of file. */

ctype/.cvsignore

@@ -1,3 +1,4 @@
+*.d *.o *.so *.po *.go stamp.* *.stamp *.ustamp *.udeps
 *.gz *.Z *.tar *.tgz
 =*
 TODO COPYING* AUTHORS copyr-* copying.*

ctype/Makefile

@@ -1,4 +1,4 @@
-# Copyright (C) 1991, 1992, 1993 Free Software Foundation, Inc.
+# Copyright (C) 1991, 1992, 1993, 1997 Free Software Foundation, Inc.
 # This file is part of the GNU C Library.
 
 # The GNU C Library is free software; you can redistribute it and/or
@@ -12,16 +12,16 @@
 # Library General Public License for more details.
 
 # You should have received a copy of the GNU Library General Public
-# License along with the GNU C Library; see the file COPYING.LIB.  If
-# not, write to the Free Software Foundation, Inc., 675 Mass Ave,
-# Cambridge, MA 02139, USA.
+# License along with the GNU C Library; see the file COPYING.LIB.  If not,
+# write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+# Boston, MA 02111-1307, USA.
 
 #
 #	Sub-makefile for ctype portion of the library.
 #
 subdir	:= ctype
 
-routines	:= ctype ctype-extn
+routines	:= ctype ctype-extn ctype_l
 aux		:= ctype-info
 
 tests	:= test_ctype

ctype/ctype-extn.c

@@ -1,32 +1,68 @@
-/* Copyright (C) 1991 Free Software Foundation, Inc.
-This file is part of the GNU C Library.
+/* Copyright (C) 1991, 1997 Free Software Foundation, Inc.
+   This file is part of the GNU C Library.
 
-The GNU C Library is free software; you can redistribute it and/or
-modify it under the terms of the GNU Library General Public License as
-published by the Free Software Foundation; either version 2 of the
-License, or (at your option) any later version.
+   The GNU C Library is free software; you can redistribute it and/or
+   modify it under the terms of the GNU Library General Public License as
+   published by the Free Software Foundation; either version 2 of the
+   License, or (at your option) any later version.
 
-The GNU C Library is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-Library General Public License for more details.
+   The GNU C Library is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+   Library General Public License for more details.
 
-You should have received a copy of the GNU Library General Public
-License along with the GNU C Library; see the file COPYING.LIB.  If
-not, write to the Free Software Foundation, Inc., 675 Mass Ave,
-Cambridge, MA 02139, USA.  */
-
-#include <ansidecl.h>
+   You should have received a copy of the GNU Library General Public
+   License along with the GNU C Library; see the file COPYING.LIB.  If not,
+   write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+   Boston, MA 02111-1307, USA.  */
 
 #define	__NO_CTYPE
 #include <ctype.h>
 
 /* Real function versions of the non-ANSI ctype functions.  */
 
-int DEFUN(isblank, (c), int c) { return __isctype ((c), _ISblank); }
+int
+isblank (int c)
+{
+  return __isctype (c, _ISblank);
+}
 
-int DEFUN(_tolower, (c), int c) { return __tolower(c); }
-int DEFUN(_toupper, (c), int c) { return __toupper(c); }
+int
+_tolower (int c)
+{
+  return __tolower (c);
+}
+int
+_toupper (int c)
+{
+  return __toupper (c);
+}
 
-int DEFUN(toascii, (c), int c) { return __toascii(c); }
-int DEFUN(isascii, (c), int c) { return __isascii(c); }
+int
+toascii (int c)
+{
+  return __toascii (c);
+}
+int
+isascii (int c)
+{
+  return __isascii (c);
+}
+
+
+int
+__isblank_l (int c, __locale_t l)
+{
+  return __isctype_l (c, _ISblank, l);
+}
+
+int
+__toascii_l (int c, __locale_t l)
+{
+  return __toascii (c);
+}
+int
+__isascii_l (int c, __locale_t l)
+{
+  return __isascii (c);
+}

ctype/ctype-info.c

@@ -1,31 +1,37 @@
-/* Copyright (C) 1991, 1992, 1995 Free Software Foundation, Inc.
-This file is part of the GNU C Library.
+/* Copyright (C) 1991, 1992, 1995, 1996, 1997 Free Software Foundation, Inc.
+   This file is part of the GNU C Library.
 
-The GNU C Library is free software; you can redistribute it and/or
-modify it under the terms of the GNU Library General Public License as
-published by the Free Software Foundation; either version 2 of the
-License, or (at your option) any later version.
+   The GNU C Library is free software; you can redistribute it and/or
+   modify it under the terms of the GNU Library General Public License as
+   published by the Free Software Foundation; either version 2 of the
+   License, or (at your option) any later version.
 
-The GNU C Library is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-Library General Public License for more details.
+   The GNU C Library is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+   Library General Public License for more details.
 
-You should have received a copy of the GNU Library General Public
-License along with the GNU C Library; see the file COPYING.LIB.  If
-not, write to the Free Software Foundation, Inc., 675 Mass Ave,
-Cambridge, MA 02139, USA.  */
+   You should have received a copy of the GNU Library General Public
+   License along with the GNU C Library; see the file COPYING.LIB.  If not,
+   write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+   Boston, MA 02111-1307, USA.  */
 
 #include <ctype.h>
 #include "../locale/localeinfo.h"
 
 /* Defined in locale/C-ctype.c.  */
 extern const char _nl_C_LC_CTYPE_class[];
+extern const char _nl_C_LC_CTYPE_class32[];
 extern const char _nl_C_LC_CTYPE_toupper[];
 extern const char _nl_C_LC_CTYPE_tolower[];
+extern const char _nl_C_LC_CTYPE_names[];
+extern const char _nl_C_LC_CTYPE_width[];
 
-#define b(u,x) (((u int *) _nl_C_LC_CTYPE_##x) + 128);
+#define b(t,x,o) (((const t *) _nl_C_LC_CTYPE_##x) + o);
 
-const unsigned short int *__ctype_b = b(unsigned short, class);
-const int *__ctype_tolower = b(, tolower);
-const int *__ctype_toupper = b(, toupper);
+const unsigned short int *__ctype_b = b (unsigned short int, class, 128);
+const unsigned int *__ctype32_b = b (unsigned int, class32, 0);
+const int *__ctype_tolower = b (int, tolower, 128);
+const int *__ctype_toupper = b (int, toupper, 128);
+const unsigned int *__ctype_names = b (unsigned int, names, 0);
+const unsigned char *__ctype_width = b (unsigned char, width, 0);

ctype/ctype.c

@@ -1,22 +1,20 @@
-/* Copyright (C) 1991, 1992 Free Software Foundation, Inc.
-This file is part of the GNU C Library.
+/* Copyright (C) 1991, 1992, 1997 Free Software Foundation, Inc.
+   This file is part of the GNU C Library.
 
-The GNU C Library is free software; you can redistribute it and/or
-modify it under the terms of the GNU Library General Public License as
-published by the Free Software Foundation; either version 2 of the
-License, or (at your option) any later version.
+   The GNU C Library is free software; you can redistribute it and/or
+   modify it under the terms of the GNU Library General Public License as
+   published by the Free Software Foundation; either version 2 of the
+   License, or (at your option) any later version.
 
-The GNU C Library is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-Library General Public License for more details.
+   The GNU C Library is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+   Library General Public License for more details.
 
-You should have received a copy of the GNU Library General Public
-License along with the GNU C Library; see the file COPYING.LIB.  If
-not, write to the Free Software Foundation, Inc., 675 Mass Ave,
-Cambridge, MA 02139, USA.  */
-
-#include <ansidecl.h>
+   You should have received a copy of the GNU Library General Public
+   License along with the GNU C Library; see the file COPYING.LIB.  If not,
+   write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+   Boston, MA 02111-1307, USA.  */
 
 #define	__NO_CTYPE
 #include <ctype.h>
@@ -24,28 +22,28 @@ Cambridge, MA 02139, USA.  */
 /* Provide real-function versions of all the ctype macros.  */
 
 #define	func(name, type) \
-  int DEFUN(name, (c), int c) { return __isctype(c, type); }
+  int name (int c) { return __isctype (c, type); }
 
-func(isalnum, _ISalnum)
-func(isalpha, _ISalpha)
-func(iscntrl, _IScntrl)
-func(isdigit, _ISdigit)
-func(islower, _ISlower)
-func(isgraph, _ISgraph)
-func(isprint, _ISprint)
-func(ispunct, _ISpunct)
-func(isspace, _ISspace)
-func(isupper, _ISupper)
-func(isxdigit, _ISxdigit)
+func (isalnum, _ISalnum)
+func (isalpha, _ISalpha)
+func (iscntrl, _IScntrl)
+func (isdigit, _ISdigit)
+func (islower, _ISlower)
+func (isgraph, _ISgraph)
+func (isprint, _ISprint)
+func (ispunct, _ISpunct)
+func (isspace, _ISspace)
+func (isupper, _ISupper)
+func (isxdigit, _ISxdigit)
 
 int
-DEFUN(tolower, (c), int c)
+tolower (int c)
 {
   return __tolower (c);
 }
 
 int
-DEFUN(toupper, (c), int c)
+toupper (int c)
 {
   return __toupper (c);
 }

ctype/ctype.h

@@ -1,23 +1,23 @@
-/* Copyright (C) 1991, 1992, 1993, 1995 Free Software Foundation, Inc.
-This file is part of the GNU C Library.
+/* Copyright (C) 1991, 92, 93, 95, 96, 97 Free Software Foundation, Inc.
+   This file is part of the GNU C Library.
 
-The GNU C Library is free software; you can redistribute it and/or
-modify it under the terms of the GNU Library General Public License as
-published by the Free Software Foundation; either version 2 of the
-License, or (at your option) any later version.
+   The GNU C Library is free software; you can redistribute it and/or
+   modify it under the terms of the GNU Library General Public License as
+   published by the Free Software Foundation; either version 2 of the
+   License, or (at your option) any later version.
 
-The GNU C Library is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-Library General Public License for more details.
+   The GNU C Library is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+   Library General Public License for more details.
 
-You should have received a copy of the GNU Library General Public
-License along with the GNU C Library; see the file COPYING.LIB.  If
-not, write to the, 1992 Free Software Foundation, Inc., 675 Mass Ave,
-Cambridge, MA 02139, USA.  */
+   You should have received a copy of the GNU Library General Public
+   License along with the GNU C Library; see the file COPYING.LIB.  If not,
+   write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+   Boston, MA 02111-1307, USA.  */
 
 /*
- *	ANSI Standard 4.3: CHARACTER HANDLING	<ctype.h>
+ *	ISO C Standard 4.3: CHARACTER HANDLING	<ctype.h>
  */
 
 #ifndef	_CTYPE_H
@@ -27,6 +27,7 @@ Cambridge, MA 02139, USA.  */
 
 __BEGIN_DECLS
 
+#ifndef _ISbit
 /* These are all the characteristics of characters.
    If there get to be more than 16 distinct characteristics,
    many things must be changed that use `unsigned short int's.
@@ -55,22 +56,21 @@ enum
   _ISblank = _ISbit (8),	/* Blank (usually SPC and TAB).  */
   _IScntrl = _ISbit (9),	/* Control character.  */
   _ISpunct = _ISbit (10),	/* Punctuation.  */
-
-  /* The following are defined in POSIX.2 as being combinations of the
-     classes above.  */
-  _ISalnum = _ISalpha | _ISdigit	/* Alphanumeric.  */
+  _ISalnum = _ISbit (11)	/* Alphanumeric.  */
 };
+#endif /* ! _ISbit  */
 
 /* These are defined in ctype-info.c.
    The declarations here must match those in localeinfo.h.
 
    These point into arrays of 384, so they can be indexed by any `unsigned
    char' value [0,255]; by EOF (-1); or by any `signed char' value
-   [-128,-1).  ANSI requires that the ctype functions work for `unsigned
+   [-128,-1).  ISO C requires that the ctype functions work for `unsigned
    char' values and for EOF; we also support negative `signed char' values
    for broken old programs.  The case conversion arrays are of `int's
    rather than `unsigned char's because tolower (EOF) must be EOF, which
-   doesn't fit into an `unsigned char'.  */
+   doesn't fit into an `unsigned char'.  But today more important is that
+   the arrays are also used for multi-byte character sets.  */
 extern __const unsigned short int *__ctype_b;	/* Characteristics.  */
 extern __const int *__ctype_tolower; /* Case conversions.  */
 extern __const int *__ctype_toupper; /* Case conversions.  */
@@ -78,8 +78,8 @@ extern __const int *__ctype_toupper; /* Case conversions.  */
 #define	__isctype(c, type) \
   (__ctype_b[(int) (c)] & (unsigned short int) type)
 
-#define	__isascii(c)	(((c) & (1 << 7)) == 0)	/* If high bit is set.  */
-#define	__toascii(c)	((c) & 0x7f) /* Mask off high bit.  */
+#define	__isascii(c)	(((c) & ~0x7f) == 0)	/* If C is a 7 bit value.  */
+#define	__toascii(c)	((c) & 0x7f)		/* Mask off high bits.  */
 
 #define	__tolower(c)	((int) __ctype_tolower[(int) (c)])
 #define	__toupper(c)	((int) __ctype_toupper[(int) (c)])
@@ -114,7 +114,7 @@ extern int tolower __P ((int __c));
 extern int toupper __P ((int __c));
 
 
-#if defined(__USE_SVID) || defined(__USE_MISC)
+#if defined(__USE_SVID) || defined(__USE_MISC) || defined(__USE_XOPEN)
 
 /* Return nonzero iff C is in the ASCII set
    (i.e., is no more than 7 bits wide).  */
@@ -126,7 +126,7 @@ extern int toascii __P ((int __c));
 
 #endif /* Use SVID or use misc.  */
 
-#ifdef	__USE_SVID
+#if defined(__USE_SVID) || defined(__USE_MISC) || defined(__USE_XOPEN)
 /* These are the same as `toupper' and `tolower'.  */
 __exctype (_toupper);
 __exctype (_tolower);
@@ -152,13 +152,90 @@ __exctype (_tolower);
 #define	tolower(c)	__tolower(c)
 #define	toupper(c)	__toupper(c)
 
-#if defined(__USE_SVID) || defined(__USE_MISC)
+#if defined(__USE_SVID) || defined(__USE_MISC) || defined(__USE_XOPEN)
 #define	isascii(c)	__isascii(c)
 #define	toascii(c)	__toascii(c)
 #endif
 
 #endif /* Not __NO_CTYPE.  */
 
+
+#ifdef __USE_GNU
+/* The concept of one static locale per category is not very well
+   thought out.  Many applications will need to process its data using
+   information from several different locales.  Another application is
+   the implementation of the internationalization handling in the
+   upcoming ISO C++ standard library.  To support this another set of
+   the functions using locale data exist which have an additional
+   argument.
+
+   Attention: all these functions are *not* standardized in any form.
+   This is a proof-of-concept implementation.  */
+
+/* Structure for reentrant locale using functions.  This is an
+   (almost) opaque type for the user level programs.  */
+# include <xlocale.h>
+
+/* These definitions are similar to the ones above but all functions
+   take as an argument a handle for the locale which shall be used.  */
+#define	__isctype_l(c, type, locale) \
+  ((locale)->__ctype_b[(int) (c)] & (unsigned short int) type)
+
+#define	__tolower_l(c, locale)	((int) (locale)->__ctype_tolower[(int) (c)])
+#define	__toupper_l(c, locale)	((int) (locale)->__ctype_toupper[(int) (c)])
+
+#define	__exctype_l(name)	extern int name __P ((int, __locale_t))
+
+/* The following names are all functions:
+     int isCHARACTERISTIC(int c, locale_t *locale);
+   which return nonzero iff C has CHARACTERISTIC.
+   For the meaning of the characteristic names, see the `enum' above.  */
+__exctype_l (__isalnum_l);
+__exctype_l (__isalpha_l);
+__exctype_l (__iscntrl_l);
+__exctype_l (__isdigit_l);
+__exctype_l (__islower_l);
+__exctype_l (__isgraph_l);
+__exctype_l (__isprint_l);
+__exctype_l (__ispunct_l);
+__exctype_l (__isspace_l);
+__exctype_l (__isupper_l);
+__exctype_l (__isxdigit_l);
+
+__exctype_l (__isblank_l);
+
+
+/* Return the lowercase version of C in locale L.  */
+extern int __tolower_l __P ((int __c, __locale_t __l));
+
+/* Return the uppercase version of C.  */
+extern int __toupper_l __P ((int __c, __locale_t __l));
+
+
+#ifndef	__NO_CTYPE
+#define	__isalnum_l(c,l)	__isctype_l((c), _ISalnum, (l))
+#define	__isalpha_l(c,l)	__isctype_l((c), _ISalpha, (l))
+#define	__iscntrl_l(c,l)	__isctype_l((c), _IScntrl, (l))
+#define	__isdigit_l(c,l)	__isctype_l((c), _ISdigit, (l))
+#define	__islower_l(c,l)	__isctype_l((c), _ISlower, (l))
+#define	__isgraph_l(c,l)	__isctype_l((c), _ISgraph, (l))
+#define	__isprint_l(c,l)	__isctype_l((c), _ISprint, (l))
+#define	__ispunct_l(c,l)	__isctype_l((c), _ISpunct, (l))
+#define	__isspace_l(c,l)	__isctype_l((c), _ISspace, (l))
+#define	__isupper_l(c,l)	__isctype_l((c), _ISupper, (l))
+#define	__isxdigit_l(c,l)	__isctype_l((c), _ISxdigit, (l))
+
+#define	__isblank_l(c,l)	__isctype_l((c), _ISblank, (l))
+
+#if defined(__USE_SVID) || defined(__USE_MISC) || defined(__USE_XOPEN)
+#define	__isascii_l(c,l)	__isascii(c)
+#define	__toascii_l(c,l)	__toascii(c)
+#endif
+
+#endif /* Not __NO_CTYPE.  */
+
+#endif /* Use GNU.  */
+
 __END_DECLS
 
 #endif /* ctype.h  */

ctype/ctype_l.c

@@ -0,0 +1,49 @@
+/* Copyright (C) 1991, 1992, 1997 Free Software Foundation, Inc.
+   This file is part of the GNU C Library.
+
+   The GNU C Library is free software; you can redistribute it and/or
+   modify it under the terms of the GNU Library General Public License as
+   published by the Free Software Foundation; either version 2 of the
+   License, or (at your option) any later version.
+
+   The GNU C Library is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+   Library General Public License for more details.
+
+   You should have received a copy of the GNU Library General Public
+   License along with the GNU C Library; see the file COPYING.LIB.  If not,
+   write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+   Boston, MA 02111-1307, USA.  */
+
+#define	__NO_CTYPE
+#include <ctype.h>
+
+/* Provide real-function versions of all the ctype macros.  */
+
+#define	func(name, type) \
+  int name (int c, __locale_t l) { return __isctype_l (c, type, l); }
+
+func (__isalnum_l, _ISalnum)
+func (__isalpha_l, _ISalpha)
+func (__iscntrl_l, _IScntrl)
+func (__isdigit_l, _ISdigit)
+func (__islower_l, _ISlower)
+func (__isgraph_l, _ISgraph)
+func (__isprint_l, _ISprint)
+func (__ispunct_l, _ISpunct)
+func (__isspace_l, _ISspace)
+func (__isupper_l, _ISupper)
+func (__isxdigit_l, _ISxdigit)
+
+int
+(__tolower_l) (int c, __locale_t l)
+{
+  return __tolower_l (c, l);
+}
+
+int
+(__toupper_l) (int c, __locale_t l)
+{
+  return __toupper_l (c, l);
+}

ctype/test_ctype.c

@@ -1,22 +1,21 @@
-/* Copyright (C) 1991, 1994 Free Software Foundation, Inc.
-This file is part of the GNU C Library.
+/* Copyright (C) 1991, 1994, 1996, 1997 Free Software Foundation, Inc.
+   This file is part of the GNU C Library.
 
-The GNU C Library is free software; you can redistribute it and/or
-modify it under the terms of the GNU Library General Public License as
-published by the Free Software Foundation; either version 2 of the
-License, or (at your option) any later version.
+   The GNU C Library is free software; you can redistribute it and/or
+   modify it under the terms of the GNU Library General Public License as
+   published by the Free Software Foundation; either version 2 of the
+   License, or (at your option) any later version.
 
-The GNU C Library is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-Library General Public License for more details.
+   The GNU C Library is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+   Library General Public License for more details.
 
-You should have received a copy of the GNU Library General Public
-License along with the GNU C Library; see the file COPYING.LIB.  If
-not, write to the Free Software Foundation, Inc., 675 Mass Ave,
-Cambridge, MA 02139, USA.  */
+   You should have received a copy of the GNU Library General Public
+   License along with the GNU C Library; see the file COPYING.LIB.  If not,
+   write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+   Boston, MA 02111-1307, USA.  */
 
-#include <ansidecl.h>
 #include <limits.h>
 #include <ctype.h>
 #include <stdio.h>
@@ -30,7 +29,7 @@ Cambridge, MA 02139, USA.  */
 __inline
 #endif
 static void
-DEFUN(print_char, (c), unsigned char c)
+print_char (unsigned char c)
 {
   printf("%d/", (int) c);
   if (isgraph(c))
@@ -40,11 +39,27 @@ DEFUN(print_char, (c), unsigned char c)
 }
 
 int
-DEFUN(main, (argc, argv), int argc AND char **argv)
+main (int argc, char **argv)
 {
-  register unsigned short int c;
+  unsigned short int c;
   int lose = 0;
 
+#define TRYEM do {							      \
+      TRY (isascii);							      \
+      TRY (isalnum);							      \
+      TRY (isalpha);							      \
+      TRY (iscntrl);							      \
+      TRY (isdigit);							      \
+      TRY (isgraph);							      \
+      TRY (islower);							      \
+      TRY (isprint);							      \
+      TRY (ispunct);							      \
+      TRY (isspace);							      \
+      TRY (isupper);							      \
+      TRY (isxdigit);							      \
+      TRY (isblank);							      \
+    } while (0)
+
   for (c = 0; c <= UCHAR_MAX; ++c)
     {
       print_char (c);
@@ -55,32 +70,10 @@ DEFUN(main, (argc, argv), int argc AND char **argv)
 	  ++lose;
 	}
 
-      if (isascii(c))
-	fputs(" isascii", stdout);
-      if (isalnum(c))
-	fputs(" isalnum", stdout);
-      if (isalpha(c))
-	fputs(" isalpha", stdout);
-      if (iscntrl(c))
-	fputs(" iscntrl", stdout);
-      if (isdigit(c))
-	fputs(" isdigit", stdout);
-      if (isgraph(c))
-	fputs(" isgraph", stdout);
-      if (islower(c))
-	fputs(" islower", stdout);
-      if (isprint(c))
-	fputs(" isprint", stdout);
-      if (ispunct(c))
-	fputs(" ispunct", stdout);
-      if (isspace(c))
-	fputs(" isspace", stdout);
-      if (isupper(c))
-	fputs(" isupper", stdout);
-      if (isxdigit(c))
-	fputs(" isxdigit", stdout);
-      if (isblank(c))
-	fputs(" isblank", stdout);
+#define TRY(isfoo) if (isfoo (c)) fputs (" " #isfoo, stdout)
+      TRYEM;
+#undef TRY
+
       fputs("; lower = ", stdout);
       print_char(tolower(c));
       fputs("; upper = ", stdout);
@@ -88,5 +81,21 @@ DEFUN(main, (argc, argv), int argc AND char **argv)
       putchar('\n');
     }
 
+  fputs ("EOF", stdout);
+  if (tolower (EOF) != EOF)
+    {
+      ++lose;
+      printf (" tolower BOGUS %d;", tolower (EOF));
+    }
+  if (toupper (EOF) != EOF)
+    {
+      ++lose;
+      printf (" toupper BOGUS %d;", toupper (EOF));
+    }
+
+#define TRY(isfoo) if (isfoo (EOF)) fputs (" " #isfoo, stdout), ++lose
+  TRYEM;
+#undef TRY
+
   exit (lose ? EXIT_FAILURE : EXIT_SUCCESS);
 }

db.h

@@ -0,0 +1 @@
+#include <db/db.h>

db/.cvsignore

@@ -0,0 +1,6 @@
+*.d *.o *.so *.po *.go stamp.* *.stamp *.ustamp *.udeps
+*.gz *.Z *.tar *.tgz
+=*
+TODO COPYING* AUTHORS copyr-* copying.*
+glibc-*
+distinfo

db/Makefile

@@ -5,17 +5,20 @@
 
 subdir = db
 
-dbdirs = btree db hash mpool recno
-vpath %.c $(dbdirs)
+subdir-dirs = btree db hash mpool recno
+vpath %.c $(subdir-dirs)
 
-routines := bt_close bt_conv bt_debug bt_delete bt_get bt_open bt_overflow \
-	    bt_page bt_put bt_search bt_seq bt_split bt_utils		   \
-	    db								   \
-	    hash hash_bigkey hash_buf hash_func hash_log2 hash_page	   \
-	    ndbm							   \
-	    mpool							   \
-	    rec_close rec_delete rec_get rec_open rec_put rec_search	   \
-	    rec_seq rec_utils
+extra-libs := libdb
+extra-libs-others := $(extra-libs)
+libdb-routines := bt_close bt_conv bt_debug bt_delete bt_get \
+		  bt_open bt_overflow bt_page bt_put bt_search \
+		  bt_seq bt_split bt_utils \
+		  db \
+		  hash hash_bigkey hash_buf hash_func hash_log2 hash_page \
+		  ndbm \
+		  mpool \
+		  rec_close rec_delete rec_get rec_open rec_put rec_search \
+		  rec_seq rec_utils
 
 headers		:= db.h mpool.h ndbm.h
 distribute	:= compat.h					\
@@ -23,6 +26,22 @@ distribute	:= compat.h					\
 		   hash/extern.h hash/hash.h hash/page.h	\
 		   recno/extern.h recno/recno.h
 
+others		:= makedb
+install-bin	:= makedb
+
 include ../Rules
 
 CPPFLAGS += -D__DBINTERFACE_PRIVATE
+
+# This file defines some static functions for alternative hash algorithms
+# that are not actually used.
+CFLAGS-hash_func.c := -Wno-unused
+
+# The db code outsmarts the compiler frequently.
+override CFLAGS += -Wno-uninitialized
+
+ifeq ($(build-shared),yes)
+$(objpfx)makedb: $(objpfx)libdb.so$(libdb.so-version)
+else
+$(objpfx)makedb: $(objpfx)libdb.a
+endif

db/btree/bt_open.c

@@ -200,7 +200,7 @@ __bt_open(fname, flags, mode, openinfo, dflags)
 		default:
 			goto einval;
 		}
-		
+
 		if ((t->bt_fd = open(fname, flags, mode)) < 0)
 			goto err;
 
@@ -388,18 +388,30 @@ tmp()
 {
 	sigset_t set, oset;
 	int fd;
-	char *envtmp;
-	char path[MAXPATHLEN];
+	const char *envtmp;
+	char *path;
+	static const char fmt[] = "%s/bt.XXXXXX";
+	size_t n;
 
 	envtmp = getenv("TMPDIR");
-	(void)snprintf(path,
-	    sizeof(path), "%s/bt.XXXXXX", envtmp ? envtmp : "/tmp");
+	if (!envtmp)
+	  envtmp = "/tmp";
+	n = strlen (envtmp) + sizeof fmt;
+#ifdef	__GNUC__
+	path = __builtin_alloca(n);
+#else
+	path = malloc(n);
+#endif
+	(void)snprintf(path, n, fmt, envtmp ? envtmp : "/tmp");
 
 	(void)sigfillset(&set);
 	(void)sigprocmask(SIG_BLOCK, &set, &oset);
 	if ((fd = mkstemp(path)) != -1)
 		(void)unlink(path);
 	(void)sigprocmask(SIG_SETMASK, &oset, NULL);
+#ifndef	__GNUC__
+	free(path);
+#endif
 	return(fd);
 }
 

db/btree/bt_put.c

@@ -201,7 +201,7 @@ delete:		if (__bt_dleaf(t, key, h, index) == RET_ERROR) {
 	 * into the offset array, shift the pointers up.
 	 */
 	nbytes = NBLEAFDBT(key->size, data->size);
-	if (h->upper - h->lower < nbytes + sizeof(indx_t)) {
+	if ((u_int32_t) (h->upper - h->lower) < nbytes + sizeof(indx_t)) {
 		if ((status = __bt_split(t, h, key,
 		    data, dflags, nbytes, index)) != RET_SUCCESS)
 			return (status);
@@ -284,7 +284,7 @@ bt_fast(t, key, data, exactp)
 	 * have to search to get split stack.
 	 */
 	nbytes = NBLEAFDBT(key->size, data->size);
-	if (h->upper - h->lower < nbytes + sizeof(indx_t))
+	if ((u_int32_t) (h->upper - h->lower) < nbytes + sizeof(indx_t))
 		goto miss;
 
 	if (t->bt_order == FORWARD) {

db/btree/bt_seq.c

@@ -92,7 +92,7 @@ __bt_seq(dbp, key, data, flags)
 	}
 
 	/*
-	 * If scan unitialized as yet, or starting at a specific record, set
+	 * If scan uninitialized as yet, or starting at a specific record, set
 	 * the scan to a specific key.  Both __bt_seqset and __bt_seqadv pin
 	 * the page the cursor references if they're successful.
 	 */
@@ -358,13 +358,13 @@ __bt_first(t, key, erval, exactp)
 	 * page) and return it.
 	 */
 	if ((ep = __bt_search(t, key, exactp)) == NULL)
-		return (NULL);
+		return (RET_SPECIAL);
 	if (*exactp) {
 		if (F_ISSET(t, B_NODUPS)) {
 			*erval = *ep;
 			return (RET_SUCCESS);
 		}
-			
+
 		/*
 		 * Walk backwards, as long as the entry matches and there are
 		 * keys left in the tree.  Save a copy of each match in case

db/btree/bt_split.c

@@ -215,7 +215,8 @@ __bt_split(t, sp, key, data, flags, ilen, argskip)
 		}
 
 		/* Split the parent page if necessary or shift the indices. */
-		if (h->upper - h->lower < nbytes + sizeof(indx_t)) {
+		if ((u_int32_t) (h->upper - h->lower)
+		    < nbytes + sizeof(indx_t)) {
 			sp = h;
 			h = h->pgno == P_ROOT ?
 			    bt_root(t, h, &l, &r, &skip, nbytes) :
@@ -673,7 +674,8 @@ bt_psplit(t, h, l, r, pskip, ilen)
 		 * where we decide to try and copy too much onto the left page.
 		 * Make sure that doesn't happen.
 		 */
-		if (skip <= off && used + nbytes >= full) {
+		if (skip <= off &&
+		    used + nbytes + sizeof(indx_t) >= full || nxt == top - 1) {
 			--off;
 			break;
 		}
@@ -686,7 +688,7 @@ bt_psplit(t, h, l, r, pskip, ilen)
 			memmove((char *)l + l->upper, src, nbytes);
 		}
 
-		used += nbytes;
+		used += nbytes + sizeof(indx_t);
 		if (used >= half) {
 			if (!isbigkey || bigkeycnt == 3)
 				break;

db/btree/bt_utils.c

@@ -76,7 +76,7 @@ __bt_ret(t, e, key, rkey, data, rdata, copy)
 	bl = GETBLEAF(e->page, e->index);
 
 	/*
-	 * We must copy big keys/data to make them contigous.  Otherwise,
+	 * We must copy big keys/data to make them contiguous.  Otherwise,
 	 * leave the page pinned and don't copy unless the user specified
 	 * concurrent access.
 	 */

db/btree/btree.h

@@ -43,6 +43,18 @@
 
 #include <mpool.h>
 
+#ifdef _LIBC
+/* In the GNU C library we must not pollute the namespace because libdb is
+   needed by libnss_db.  */
+#define mpool_open __mpool_open
+#define mpool_filter __mpool_filter
+#define mpool_new __mpool_new
+#define mpool_get __mpool_get
+#define mpool_put __mpool_put
+#define mpool_sync __mpool_sync
+#define mpool_close __mpool_close
+#endif
+
 #define	DEFMINKEYPAGE	(2)		/* Minimum keys per page */
 #define	MINCACHE	(5)		/* Minimum cached pages */
 #define	MINPSIZE	(512)		/* Minimum page size */
@@ -161,7 +173,7 @@ typedef struct _rinternal {
 #define NRINTERNAL							\
 	LALIGN(sizeof(recno_t) + sizeof(pgno_t))
 
-/* Copy a RINTERAL entry to the page. */
+/* Copy a RINTERNAL entry to the page. */
 #define	WR_RINTERNAL(p, nrecs, pgno) {					\
 	*(recno_t *)p = nrecs;						\
 	p += sizeof(recno_t);						\

db/db.h

@@ -224,6 +224,7 @@ typedef struct {
 #endif
 
 __BEGIN_DECLS
+DB *__dbopen __P((const char *, int, int, DBTYPE, const void *));
 DB *dbopen __P((const char *, int, int, DBTYPE, const void *));
 
 #ifdef __DBINTERFACE_PRIVATE

db/db/db.c

@@ -44,6 +44,12 @@ static char sccsid[] = "@(#)db.c	8.4 (Berkeley) 2/21/94";
 
 #include <db.h>
 
+#ifdef _LIBC
+/* In the GNU C library we must not pollute the namespace, because libdb
+   is needed by libnss_db.  */
+#define dbopen __dbopen
+#endif
+
 DB *
 dbopen(fname, flags, mode, type, openinfo)
 	const char *fname;
@@ -72,9 +78,13 @@ dbopen(fname, flags, mode, type, openinfo)
 	errno = EINVAL;
 	return (NULL);
 }
+#ifdef _LIBC
+#undef dbopen
+weak_alias (__dbopen, dbopen)
+#endif
 
 static int
-__dberr()
+__dberr __P((void))
 {
 	return (RET_ERROR);
 }
@@ -90,10 +100,14 @@ __dbpanic(dbp)
 	DB *dbp;
 {
 	/* The only thing that can succeed is a close. */
-	dbp->del = (int (*)())__dberr;
-	dbp->fd = (int (*)())__dberr;
-	dbp->get = (int (*)())__dberr;
-	dbp->put = (int (*)())__dberr;
-	dbp->seq = (int (*)())__dberr;
-	dbp->sync = (int (*)())__dberr;
+	dbp->del = (int (*)__P((const struct __db *,
+				const DBT *, u_int))) __dberr;
+	dbp->get = (int (*)__P((const struct __db *,
+				const DBT *, DBT *, u_int))) __dberr;
+	dbp->put = (int (*)__P((const struct __db *,
+				DBT *, const DBT *, u_int))) __dberr;
+	dbp->seq = (int (*)__P((const struct __db *,
+				DBT *, DBT *, u_int))) __dberr;
+	dbp->sync = (int (*)__P((const struct __db *, u_int))) __dberr;
+	dbp->fd = (int (*)__P((const struct __db *))) __dberr;
 }

db/hash/hash.c

@@ -157,7 +157,8 @@ __hash_open(file, flags, mode, info, dflags)
 		if (hashp->VERSION != HASHVERSION &&
 		    hashp->VERSION != OLDHASHVERSION)
 			RETURN_ERROR(EFTYPE, error1);
-		if (hashp->hash(CHARKEY, sizeof(CHARKEY)) != hashp->H_CHARKEY)
+		if (hashp->hash(CHARKEY, sizeof(CHARKEY))
+		    != (u_int32_t) hashp->H_CHARKEY)
 			RETURN_ERROR(EFTYPE, error1);
 		/*
 		 * Figure out how many segments we need.  Max_Bucket is the
@@ -189,7 +190,7 @@ __hash_open(file, flags, mode, info, dflags)
 		__buf_init(hashp, DEF_BUFSIZE);
 
 	hashp->new_file = new_table;
-	hashp->save_file = file && (hashp->flags & O_RDWR);
+	hashp->save_file = file && (hashp->flags & O_ACCMODE) != O_RDONLY;
 	hashp->cbucket = -1;
 	if (!(dbp = (DB *)malloc(sizeof(DB)))) {
 		save_errno = errno;
@@ -505,7 +506,7 @@ flush_meta(hashp)
 	else
 		if (wsize != sizeof(HASHHDR)) {
 			errno = EFTYPE;
-			hashp->errno = errno;
+			hashp->errnum = errno;
 			return (-1);
 		}
 	for (i = 0; i < NCACHED; i++)
@@ -536,7 +537,7 @@ hash_get(dbp, key, data, flag)
 
 	hashp = (HTAB *)dbp->internal;
 	if (flag) {
-		hashp->errno = errno = EINVAL;
+		hashp->errnum = errno = EINVAL;
 		return (ERROR);
 	}
 	return (hash_access(hashp, HASH_GET, (DBT *)key, data));
@@ -553,11 +554,11 @@ hash_put(dbp, key, data, flag)
 
 	hashp = (HTAB *)dbp->internal;
 	if (flag && flag != R_NOOVERWRITE) {
-		hashp->errno = errno = EINVAL;
+		hashp->errnum = errno = EINVAL;
 		return (ERROR);
 	}
 	if ((hashp->flags & O_ACCMODE) == O_RDONLY) {
-		hashp->errno = errno = EPERM;
+		hashp->errnum = errno = EPERM;
 		return (ERROR);
 	}
 	return (hash_access(hashp, flag == R_NOOVERWRITE ?
@@ -574,11 +575,11 @@ hash_delete(dbp, key, flag)
 
 	hashp = (HTAB *)dbp->internal;
 	if (flag && flag != R_CURSOR) {
-		hashp->errno = errno = EINVAL;
+		hashp->errnum = errno = EINVAL;
 		return (ERROR);
 	}
 	if ((hashp->flags & O_ACCMODE) == O_RDONLY) {
-		hashp->errno = errno = EPERM;
+		hashp->errnum = errno = EPERM;
 		return (ERROR);
 	}
 	return (hash_access(hashp, HASH_DELETE, (DBT *)key, NULL));
@@ -729,7 +730,7 @@ hash_seq(dbp, key, data, flag)
 
 	hashp = (HTAB *)dbp->internal;
 	if (flag && flag != R_FIRST && flag != R_NEXT) {
-		hashp->errno = errno = EINVAL;
+		hashp->errnum = errno = EINVAL;
 		return (ERROR);
 	}
 #ifdef HASH_STATISTICS
@@ -744,7 +745,7 @@ hash_seq(dbp, key, data, flag)
 	for (bp = NULL; !bp || !bp[0]; ) {
 		if (!(bufp = hashp->cpage)) {
 			for (bucket = hashp->cbucket;
-			    bucket <= hashp->MAX_BUCKET;
+			    bucket <= (u_int32_t) hashp->MAX_BUCKET;
 			    bucket++, hashp->cndx = 1) {
 				bufp = __get_buf(hashp, bucket, NULL, 0);
 				if (!bufp)
@@ -848,7 +849,7 @@ __expand_table(hashp)
 		hashp->OVFL_POINT = spare_ndx;
 	}
 
-	if (new_bucket > hashp->HIGH_MASK) {
+	if (new_bucket > (u_int32_t) hashp->HIGH_MASK) {
 		/* Starting a new doubling */
 		hashp->LOW_MASK = hashp->HIGH_MASK;
 		hashp->HIGH_MASK = new_bucket | hashp->LOW_MASK;

db/hash/hash.h

@@ -71,28 +71,28 @@ typedef struct hashhdr {		/* Disk resident portion */
 	int		dsize;		/* Directory Size */
 	int		ssize;		/* Segment Size */
 	int		sshift;		/* Segment shift */
-	int		ovfl_point;	/* Where overflow pages are being 
+	int		ovfl_point;	/* Where overflow pages are being
 					 * allocated */
 	int		last_freed;	/* Last overflow page freed */
 	int		max_bucket;	/* ID of Maximum bucket in use */
 	int		high_mask;	/* Mask to modulo into entire table */
-	int		low_mask;	/* Mask to modulo into lower half of 
+	int		low_mask;	/* Mask to modulo into lower half of
 					 * table */
 	int		ffactor;	/* Fill factor */
 	int		nkeys;		/* Number of keys in hash table */
 	int		hdrpages;	/* Size of table header */
 	int		h_charkey;	/* value of hash(CHARKEY) */
-#define NCACHED	32			/* number of bit maps and spare 
+#define NCACHED	32			/* number of bit maps and spare
 					 * points */
 	int		spares[NCACHED];/* spare pages for overflow */
-	u_int16_t	bitmaps[NCACHED];	/* address of overflow page 
+	u_int16_t	bitmaps[NCACHED];	/* address of overflow page
 						 * bitmaps */
 } HASHHDR;
 
 typedef struct htab	 {		/* Memory resident data structure */
 	HASHHDR 	hdr;		/* Header */
 	int		nsegs;		/* Number of allocated segments */
-	int		exsegs;		/* Number of extra allocated 
+	int		exsegs;		/* Number of extra allocated
 					 * segments */
 	u_int32_t			/* Hash function */
 	    (*hash)__P((const void *, size_t));
@@ -103,16 +103,16 @@ typedef struct htab	 {		/* Memory resident data structure */
 	BUFHEAD 	*cpage;		/* Current page */
 	int		cbucket;	/* Current bucket */
 	int		cndx;		/* Index of next item on cpage */
-	int		errno;		/* Error Number -- for DBM 
-					 * compatability */
-	int		new_file;	/* Indicates if fd is backing store 
+	int		errnum;		/* Error Number -- for DBM
+					 * compatibility */
+	int		new_file;	/* Indicates if fd is backing store
 					 * or no */
-	int		save_file;	/* Indicates whether we need to flush 
+	int		save_file;	/* Indicates whether we need to flush
 					 * file at
 					 * exit */
 	u_int32_t	*mapp[NCACHED];	/* Pointers to page maps */
 	int		nmaps;		/* Initial number of bitmaps */
-	int		nbufs;		/* Number of buffers left to 
+	int		nbufs;		/* Number of buffers left to
 					 * allocate */
 	BUFHEAD 	bufhead;	/* Header of buffer lru list */
 	SEGMENT 	*dir;		/* Hash Bucket directory */
@@ -194,7 +194,7 @@ typedef struct htab	 {		/* Memory resident data structure */
  *		so it starts on this page and continues on the next.
  *		The format of the page is:
  *		    KEY_OFF PARTIAL_KEY OVFL_PAGENO OVFLPAGE
- *		
+ *
  *		    KEY_OFF -- offset of the beginning of the key
  *		    PARTIAL_KEY -- 1
  *		    OVFL_PAGENO - page number of the next overflow page
@@ -229,7 +229,7 @@ typedef struct htab	 {		/* Memory resident data structure */
  *		    OVFL_PAGENO - page number of the next overflow page
  *		    OVFLPAGE -- 0
  *
- * FULL_KEY_DATA 
+ * FULL_KEY_DATA
  *		This must be the first key/data pair on the page.
  *		There are two cases:
  *

db/hash/hash_bigkey.c

@@ -147,7 +147,7 @@ __big_insert(hashp, bufp, key, val)
 		 * Here's the hack to make sure that if the data ends on the
 		 * same page as the key ends, FREESPACE is at least one.
 		 */
-		if (space == val_size && val_size == val->size)
+		if ((int) space == val_size && (size_t) val_size == val->size)
 			move_bytes--;
 		off = OFFSET(p) - move_bytes;
 		memmove(cp + off, val_data, move_bytes);
@@ -249,7 +249,7 @@ __big_delete(hashp, bufp)
 	bufp->flags |= BUF_MOD;
 	if (rbufp)
 		__free_ovflpage(hashp, rbufp);
-	if (last_bfp != rbufp)
+	if (last_bfp && last_bfp != rbufp)
 		__free_ovflpage(hashp, last_bfp);
 
 	hashp->NKEYS--;
@@ -431,7 +431,7 @@ __big_return(hashp, bufp, ndx, val, set_current)
 		}
 
 	val->size = collect_data(hashp, bufp, (int)len, set_current);
-	if (val->size == -1)
+	if (val->size == (size_t) -1)
 		return (-1);
 	if (save_p->addr != save_addr) {
 		/* We are pretty short on buffers. */
@@ -510,7 +510,7 @@ __big_keydata(hashp, bufp, key, val, set)
 	int set;
 {
 	key->size = collect_key(hashp, bufp, 0, val, set);
-	if (key->size == -1)
+	if (key->size == (size_t) -1)
 		return (-1);
 	key->data = (u_char *)hashp->tmp_key;
 	return (0);

db/hash/hash_log2.c

@@ -42,6 +42,8 @@ static char sccsid[] = "@(#)hash_log2.c	8.2 (Berkeley) 5/31/94";
 
 #include <db.h>
 
+u_int32_t __log2 __P((u_int32_t));
+
 u_int32_t
 __log2(num)
 	u_int32_t num;

db/hash/ndbm.c

@@ -47,6 +47,7 @@ static char sccsid[] = "@(#)ndbm.c	8.4 (Berkeley) 7/21/94";
 
 #include <stdio.h>
 #include <string.h>
+#include <stdlib.h>
 
 #include <ndbm.h>
 #include "hash.h"
@@ -61,8 +62,16 @@ dbm_open(file, flags, mode)
 	const char *file;
 	int flags, mode;
 {
+  	DBM *db;
 	HASHINFO info;
-	char path[MAXPATHLEN];
+	const size_t len = strlen(file) + sizeof (DBM_SUFFIX);
+#ifdef __GNUC__
+	char path[len];
+#else
+	char *path = malloc(len);
+	if (path == NULL)
+		return NULL;
+#endif
 
 	info.bsize = 4096;
 	info.ffactor = 40;
@@ -72,7 +81,11 @@ dbm_open(file, flags, mode)
 	info.lorder = 0;
 	(void)strcpy(path, file);
 	(void)strcat(path, DBM_SUFFIX);
-	return ((DBM *)__hash_open(path, flags, mode, &info, 0));
+	db = (DBM *)__hash_open(path, flags, mode, &info, 0);
+#ifndef	__GNUC__
+	free(path);
+#endif
+	return db;
 }
 
 extern void
@@ -180,7 +193,7 @@ dbm_error(db)
 	HTAB *hp;
 
 	hp = (HTAB *)db->internal;
-	return (hp->errno);
+	return (hp->errnum);
 }
 
 extern int
@@ -190,7 +203,7 @@ dbm_clearerr(db)
 	HTAB *hp;
 
 	hp = (HTAB *)db->internal;
-	hp->errno = 0;
+	hp->errnum = 0;
 	return (0);
 }
 

db/makedb.c

@@ -0,0 +1,362 @@
+/* Create simple DB database from textual input.
+   Copyright (C) 1996, 1997 Free Software Foundation, Inc.
+   This file is part of the GNU C Library.
+   Contributed by Ulrich Drepper <drepper@cygnus.com>, 1996.
+
+   The GNU C Library is free software; you can redistribute it and/or
+   modify it under the terms of the GNU Library General Public License as
+   published by the Free Software Foundation; either version 2 of the
+   License, or (at your option) any later version.
+
+   The GNU C Library is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+   Library General Public License for more details.
+
+   You should have received a copy of the GNU Library General Public
+   License along with the GNU C Library; see the file COPYING.LIB.  If not,
+   write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+   Boston, MA 02111-1307, USA.  */
+
+#include <argp.h>
+#include <ctype.h>
+#include <db.h>
+#include <errno.h>
+#include <error.h>
+#include <fcntl.h>
+#include <libintl.h>
+#include <locale.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+
+/* Get libc version number.  */
+#include "../version.h"
+
+#define PACKAGE _libc_intl_domainname
+
+/* If non-zero convert key to lower case.  */
+static int to_lowercase;
+
+/* If non-zero print content of input file, one entry per line.  */
+static int do_undo;
+
+/* If non-zero do not print informational messages.  */
+static int be_quiet;
+
+/* Name of output file.  */
+static const char *output_name;
+
+/* Name and version of program.  */
+static void print_version (FILE *stream, struct argp_state *state);
+void (*argp_program_version_hook) (FILE *, struct argp_state *) = print_version;
+
+/* Definitions of arguments for argp functions.  */
+static const struct argp_option options[] =
+{
+  { "fold-case", 'f', NULL, 0, N_("Convert key to lower case") },
+  { "output", 'o', N_("NAME"), 0, N_("Write output to file NAME") },
+  { "quiet", 'q', NULL, 0,
+    N_("Do not print messages while building database") },
+  { "undo", 'u', NULL, 0,
+    N_("Print content of database file, one entry a line") },
+  { NULL, 0, NULL, 0, NULL }
+};
+
+/* Short description of program.  */
+static const char doc[] = N_("Create simple DB database from textual input.");
+
+/* Strings for arguments in help texts.  */
+static const char args_doc[] = N_("\
+INPUT-FILE OUTPUT-FILE\n-o OUTPUT-FILE INPUT-FILE\n-u INPUT-FILE");
+
+/* Prototype for option handler.  */
+static error_t parse_opt __P ((int key, char *arg, struct argp_state *state));
+
+/* Function to print some extra text in the help message.  */
+static char *more_help __P ((int key, const char *text, void *input));
+
+/* Data structure to communicate with argp functions.  */
+static struct argp argp =
+{
+  options, parse_opt, args_doc, doc, NULL, more_help
+};
+
+
+/* Prototypes for local functions.  */
+static int process_input __P ((FILE *input, const char *inname, DB *output,
+			       int to_lowercase, int be_quiet));
+static int print_database __P ((DB *db));
+int main __P ((int argc, char *argv[]));
+
+
+int
+main (argc, argv)
+     int argc;
+     char *argv[];
+{
+  const char *input_name;
+  FILE *input_file;
+  DB *db_file;
+  int status;
+  int remaining;
+
+  /* Set locale via LC_ALL.  */
+  setlocale (LC_ALL, "");
+
+  /* Set the text message domain.  */
+  textdomain (_libc_intl_domainname);
+
+  /* Initialize local variables.  */
+  input_name = NULL;
+
+  /* Parse and process arguments.  */
+  argp_parse (&argp, argc, argv, 0, &remaining, NULL);
+
+  /* Determine file names.  */
+  if (do_undo || output_name != NULL)
+    {
+      if (remaining + 1 != argc)
+	{
+	wrong_arguments:
+	  error (0, 0, gettext ("wrong number of arguments"));
+	  argp_help (&argp, stdout, ARGP_HELP_SEE,
+		     program_invocation_short_name);
+	}
+      input_name = argv[remaining];
+    }
+  else
+    {
+      if (remaining + 2 != argc)
+	goto wrong_arguments;
+
+      input_name = argv[remaining++];
+      output_name = argv[remaining];
+    }
+
+  /* Special handling if we are asked to print the database.  */
+  if (do_undo)
+    {
+      db_file = dbopen (input_name, O_RDONLY, 0666, DB_BTREE, NULL);
+      if (db_file == NULL)
+	error (EXIT_FAILURE, 0, gettext ("cannot open database file `%s': %s"),
+	       input_name,
+	       errno == EFTYPE ? gettext ("incorrectly formatted file")
+			       : strerror (errno));
+
+      status = print_database (db_file);
+
+      db_file->close (db_file);
+
+      return status;
+    }
+
+  /* Open input file.  */
+  if (strcmp (input_name, "-") == 0 || strcmp (input_name, "/dev/stdin") == 0)
+    input_file = stdin;
+  else
+    {
+      input_file = fopen (input_name, "r");
+      if (input_file == NULL)
+	error (EXIT_FAILURE, errno, gettext ("cannot open input file `%s'"),
+	       input_name);
+    }
+
+  /* Open output file.  This must not be standard output so we don't
+     handle "-" and "/dev/stdout" special.  */
+  db_file = dbopen (output_name, O_CREAT | O_RDWR | O_TRUNC, 0666,
+		    DB_BTREE, NULL);
+  if (db_file == NULL)
+    error (EXIT_FAILURE, errno, gettext ("cannot open output file `%s'"));
+
+  /* Start the real work.  */
+  status = process_input (input_file, input_name, db_file, to_lowercase,
+			  be_quiet);
+
+  /* Close files.  */
+  if (input_file != stdin)
+    fclose (input_file);
+  db_file->close (db_file);
+
+  return status;
+}
+
+
+/* Handle program arguments.  */
+static error_t
+parse_opt (int key, char *arg, struct argp_state *state)
+{
+  switch (key)
+    {
+    case 'f':
+      to_lowercase = 1;
+      break;
+    case 'o':
+      output_name = arg;
+      break;
+    case 'q':
+      be_quiet = 1;
+      break;
+    case 'u':
+      do_undo = 1;
+      break;
+    default:
+      return ARGP_ERR_UNKNOWN;
+    }
+  return 0;
+}
+
+
+static char *
+more_help (int key, const char *text, void *input)
+{
+  switch (key)
+    {
+    case ARGP_KEY_HELP_EXTRA:
+      /* We print some extra information.  */
+      return strdup (gettext ("\
+Report bugs using the `glibcbug' script to <bugs@gnu.ai.mit.edu>.\n"));
+    default:
+      break;
+    }
+  return (char *) text;
+}
+
+/* Print the version information.  */
+static void
+print_version (FILE *stream, struct argp_state *state)
+{
+  fprintf (stream, "makedb (GNU %s) %s\n", PACKAGE, VERSION);
+  fprintf (stream, gettext ("\
+Copyright (C) %s Free Software Foundation, Inc.\n\
+This is free software; see the source for copying conditions.  There is NO\n\
+warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.\n\
+"), "1996, 1997");
+  fprintf (stream, gettext ("Written by %s.\n"), "Ulrich Drepper");
+}
+
+
+static int
+process_input (input, inname, output, to_lowercase, be_quiet)
+     FILE *input;
+     const char *inname;
+     DB *output;
+     int to_lowercase;
+     int be_quiet;
+{
+  char *line;
+  size_t linelen;
+  int status;
+  size_t linenr;
+
+  line = NULL;
+  linelen = 0;
+  status = EXIT_SUCCESS;
+  linenr = 0;
+
+  while (!feof (input))
+    {
+      DBT key;
+      DBT val;
+      char *cp;
+      int n;
+
+      n = getline (&line, &linelen, input);
+      if (n < 0)
+	/* This means end of file or some bug.  */
+	break;
+      if (n == 0)
+	/* Short read.  Probably interrupted system call. */
+	continue;
+
+      ++linenr;
+
+      if (line[n - 1] == '\n')
+	/* Remove trailing newline.  */
+	line[--n] = '\0';
+
+      cp = line;
+      while (isspace (*cp))
+	++cp;
+
+      if (*cp == '#')
+	/* First non-space character in line '#': it's a comment.  */
+	continue;
+
+      key.data = cp;
+      while (*cp != '\0' && !isspace (*cp))
+	{
+	  if (to_lowercase)
+	    *cp = tolower (*cp);
+	  ++cp;
+	}
+
+      if (key.data == cp)
+	/* It's an empty line.  */
+	continue;
+
+      key.size = cp - (char *) key.data;
+
+      while (isspace (*cp))
+	++cp;
+
+      val.data = cp;
+      val.size = &line[n] - cp;
+
+      /* Store the value.  */
+      status = output->put (output, &key, &val, R_NOOVERWRITE);
+      if (status != 0)
+	{
+	  if (status == 1)
+	    {
+	      if (!be_quiet)
+		error_at_line (0, 0, inname, linenr,
+			       gettext ("duplicate key"));
+	      /* This is no real error.  Just give a warning.  */
+	      status = 0;
+	    }
+	  else
+	    error (0, errno, gettext ("while writing data base file"));
+
+	  status = status ? EXIT_FAILURE : EXIT_SUCCESS;
+
+	  clearerr (input);
+	  break;
+	}
+    }
+
+  if (ferror (input))
+    {
+      error (0, 0, gettext ("problems while reading `%s'"));
+      status = EXIT_FAILURE;
+    }
+
+  return status;
+}
+
+
+static int
+print_database (db)
+     DB *db;
+{
+  DBT key;
+  DBT val;
+  int no_more;
+
+  no_more = db->seq (db, &key, &val, R_FIRST);
+  while (!no_more)
+    {
+      printf ("%.*s %.*s\n", (int) key.size, (char *) key.data, (int) val.size,
+	      (char *) val.data);
+
+      no_more = db->seq (db, &key, &val, R_NEXT);
+    }
+
+  if (no_more == -1)
+    {
+      error (0, errno, gettext ("while reading database"));
+      return EXIT_FAILURE;
+    }
+
+  return EXIT_SUCCESS;
+}

db/mpool.h

@@ -85,13 +85,21 @@ typedef struct MPOOL {
 } MPOOL;
 
 __BEGIN_DECLS
+MPOOL	*__mpool_open __P((void *, int, pgno_t, pgno_t));
 MPOOL	*mpool_open __P((void *, int, pgno_t, pgno_t));
+void	 __mpool_filter __P((MPOOL *, void (*)(void *, pgno_t, void *),
+	    void (*)(void *, pgno_t, void *), void *));
 void	 mpool_filter __P((MPOOL *, void (*)(void *, pgno_t, void *),
 	    void (*)(void *, pgno_t, void *), void *));
+void	*__mpool_new __P((MPOOL *, pgno_t *));
 void	*mpool_new __P((MPOOL *, pgno_t *));
+void	*__mpool_get __P((MPOOL *, pgno_t, u_int));
 void	*mpool_get __P((MPOOL *, pgno_t, u_int));
+int	 __mpool_put __P((MPOOL *, void *, u_int));
 int	 mpool_put __P((MPOOL *, void *, u_int));
+int	 __mpool_sync __P((MPOOL *));
 int	 mpool_sync __P((MPOOL *));
+int	 __mpool_close __P((MPOOL *));
 int	 mpool_close __P((MPOOL *));
 #ifdef STATISTICS
 void	 mpool_stat __P((MPOOL *));

db/mpool/mpool.c

@@ -50,6 +50,18 @@ static char sccsid[] = "@(#)mpool.c	8.5 (Berkeley) 7/26/94";
 #define	__MPOOLINTERFACE_PRIVATE
 #include <mpool.h>
 
+#ifdef _LIBC
+/* In the GNU C library we must not pollute the namespace because libdb is
+   needed by libnss_db.  */
+#define mpool_open __mpool_open
+#define mpool_filter __mpool_filter
+#define mpool_new __mpool_new
+#define mpool_get __mpool_get
+#define mpool_put __mpool_put
+#define mpool_sync __mpool_sync
+#define mpool_close __mpool_close
+#endif
+
 static BKT *mpool_bkt __P((MPOOL *));
 static BKT *mpool_look __P((MPOOL *, pgno_t));
 static int  mpool_write __P((MPOOL *, BKT *));
@@ -109,7 +121,7 @@ mpool_filter(mp, pgin, pgout, pgcookie)
 	mp->pgout = pgout;
 	mp->pgcookie = pgcookie;
 }
-	
+
 /*
  * mpool_new --
  *	Get a new page of memory.
@@ -205,7 +217,8 @@ mpool_get(mp, pgno, flags)
 	off = mp->pagesize * pgno;
 	if (lseek(mp->fd, off, SEEK_SET) != off)
 		return (NULL);
-	if ((nr = read(mp->fd, bp->page, mp->pagesize)) != mp->pagesize) {
+	if ((u_long) (nr = read(mp->fd, bp->page, mp->pagesize))
+	    != mp->pagesize) {
 		if (nr >= 0)
 			errno = EFTYPE;
 		return (NULL);
@@ -300,6 +313,23 @@ mpool_sync(mp)
 	return (fsync(mp->fd) ? RET_ERROR : RET_SUCCESS);
 }
 
+#ifdef _LIBC
+#undef mpool_open
+#undef mpool_filter
+#undef mpool_new
+#undef mpool_get
+#undef mpool_put
+#undef mpool_close
+#undef mpool_sync
+weak_alias (__mpool_open, mpool_open)
+weak_alias (__mpool_filter, mpool_filter)
+weak_alias (__mpool_new, mpool_new)
+weak_alias (__mpool_get, mpool_get)
+weak_alias (__mpool_put, mpool_put)
+weak_alias (__mpool_close, mpool_close)
+weak_alias (__mpool_sync, mpool_sync)
+#endif
+
 /*
  * mpool_bkt
  *	Get a page from the cache (or create one).
@@ -380,7 +410,7 @@ mpool_write(mp, bp)
 	off = mp->pagesize * bp->pgno;
 	if (lseek(mp->fd, off, SEEK_SET) != off)
 		return (RET_ERROR);
-	if (write(mp->fd, bp->page, mp->pagesize) != mp->pagesize)
+	if ((u_long) write(mp->fd, bp->page, mp->pagesize) != mp->pagesize)
 		return (RET_ERROR);
 
 	bp->flags &= ~MPOOL_DIRTY;
@@ -436,7 +466,7 @@ mpool_stat(mp)
 	    mp->pagealloc, mp->pageflush);
 	if (mp->cachehit + mp->cachemiss)
 		(void)fprintf(stderr,
-		    "%.0f%% cache hit rate (%lu hits, %lu misses)\n", 
+		    "%.0f%% cache hit rate (%lu hits, %lu misses)\n",
 		    ((double)mp->cachehit / (mp->cachehit + mp->cachemiss))
 		    * 100, mp->cachehit, mp->cachemiss);
 	(void)fprintf(stderr, "%lu page reads, %lu page writes\n",
@@ -456,7 +486,7 @@ mpool_stat(mp)
 			cnt = 0;
 		} else
 			sep = ", ";
-			
+
 	}
 	(void)fprintf(stderr, "\n");
 }

db/ndbm.h

@@ -72,6 +72,8 @@ datum	 dbm_nextkey __P((DBM *));
 DBM	*dbm_open __P((const char *, int, int));
 int	 dbm_store __P((DBM *, datum, datum, int));
 int	 dbm_dirfno __P((DBM *));
+int	 dbm_error __P((DBM *));
+int	 dbm_clearerr __P((DBM *));
 __END_DECLS
 
 #endif /* !_NDBM_H_ */

db/recno/rec_close.c

@@ -150,7 +150,7 @@ __rec_sync(dbp, flags)
 		 */
 		status = (dbp->seq)(dbp, &key, &data, R_FIRST);
 		while (status == RET_SUCCESS) {
-			if (write(t->bt_rfd, data.data, data.size) != data.size)
+			if ((size_t) write(t->bt_rfd, data.data, data.size) != data.size)
 				return (RET_ERROR);
 			status = (dbp->seq)(dbp, &key, &data, R_NEXT);
 		}
@@ -162,7 +162,7 @@ __rec_sync(dbp, flags)
 		while (status == RET_SUCCESS) {
 			iov[0].iov_base = data.data;
 			iov[0].iov_len = data.size;
-			if (writev(t->bt_rfd, iov, 2) != data.size + 1)
+			if ((size_t) writev(t->bt_rfd, iov, 2) != data.size + 1)
 				return (RET_ERROR);
 			status = (dbp->seq)(dbp, &key, &data, R_NEXT);
 		}

db/recno/rec_put.c

@@ -170,7 +170,7 @@ einval:		errno = EINVAL;
 
 	if (flags == R_SETCURSOR)
 		t->bt_cursor.rcursor = nrec;
-	
+
 	F_SET(t, R_MODIFIED);
 	return (__rec_ret(t, NULL, nrec, key, NULL));
 }
@@ -256,7 +256,7 @@ __rec_iput(t, nrec, data, flags)
 	 * the offset array, shift the pointers up.
 	 */
 	nbytes = NRLEAFDBT(data->size);
-	if (h->upper - h->lower < nbytes + sizeof(indx_t)) {
+	if ((u_int32_t) (h->upper - h->lower) < nbytes + sizeof(indx_t)) {
 		status = __bt_split(t, h, NULL, data, dflags, nbytes, index);
 		if (status == RET_SUCCESS)
 			++t->bt_nrecs;

db/recno/rec_seq.c

@@ -31,7 +31,7 @@
  * SUCH DAMAGE.
  */
 
-#ifndef lint
+#if defined(LIBC_SCCS) && !defined(lint)
 static char sccsid[] = "@(#)rec_seq.c	8.3 (Berkeley) 7/14/94";
 #endif /* not lint */
 

db/recno/rec_utils.c

@@ -90,7 +90,7 @@ dataonly:
 		return (RET_SUCCESS);
 
 	/*
-	 * We must copy big keys/data to make them contigous.  Otherwise,
+	 * We must copy big keys/data to make them contiguous.  Otherwise,
 	 * leave the page pinned and don't copy unless the user specified
 	 * concurrent access.
 	 */

dirent/.cvsignore

@@ -1,3 +1,4 @@
+*.d *.o *.so *.po *.go stamp.* *.stamp *.ustamp *.udeps
 *.gz *.Z *.tar *.tgz
 =*
 TODO COPYING* AUTHORS copyr-* copying.*