When -D_FORTIFY_SOURCE=2 was given during compilation,
sprintf and similar functions will check if their
first argument is in read-only memory and exit with
*** %n in writable segment detected ***
otherwise. To check if the memory is read-only, glibc
reads frpm the file "/proc/self/maps". If opening this
file fails due to too many open files (EMFILE), glibc
will now ignore this error.
Fixes [BZ #30932]
Signed-off-by: Volker Weißmann <volker.weissmann@gmx.de>
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Linux v5.10 added a mount option MS_NOSYMFOLLOW, which was added to
glibc in commit 0ca21427d9.
Add the corresponding statfs/statvfs flag bit, ST_NOSYMFOLLOW.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
AT_EMPTY_PATH is a requirement to implement fstat over fstatat,
however it does not prevent the kernel to read the path argument.
It is not an issue, but on x86-64 with SMAP-capable CPUs the kernel is
forced to perform expensive user memory access. After that regular
lookup is performed which adds even more overhead.
Instead, issue the fstat syscall directly on LFS fstat implementation
(32 bit architectures will still continue to use statx, which is
required to have 64 bit time_t support). it should be even a
small performance gain on non x86_64, since there is no need
to handle the path argument.
Checked on x86_64-linux-gnu.
This patch updates the kernel version in the tests tst-mman-consts.py
and tst-pidfd-consts.py to 6.5. (There are no new constants covered
by these tests in 6.5 that need any other header changes;
tst-mount-consts.py was updated separately along with a header
constant addition.)
Tested with build-many-glibcs.py.
This patch adds the MOVE_MOUNT_BENEATH constant from Linux 6.5 to
glibc's sys/mount.h and updates tst-mount-consts.py to reflect these
constants being up to date with that Linux kernel version.
Tested with build-many-glibcs.py.
Linux 6.5 has one new syscall, cachestat, and also enables the
cacheflush syscall for hppa. Update syscall-names.list and regenerate
the arch-syscall.h headers with build-many-glibcs.py update-syscalls.
Tested with build-many-glibcs.py.
Needed since gcc-10 enabled -fno-common by default.
[In use in Gentoo since gcc-10, no problems observed.
Also discussed with and reviewed by Jessica Clarke from
Debian. Andreas]
Bug: https://bugs.gentoo.org/723268
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Signed-off-by: Sergei Trofimovich <slyich@gmail.com>
Signed-off-by: Andreas K. Hüttel <dilfridge@gentoo.org>
Commit 5f828ff824 ("io: Fix F_GETLK, F_SETLK, and F_SETLKW for
powerpc64") fixed an issue with the value of the lock constants on
powerpc64 when not using __USE_FILE_OFFSET64, but it ended-up also
changing the value when using __USE_FILE_OFFSET64 causing an API change.
Fix that by also checking that define, restoring the pre
4d0fe291ae commit values:
Default values:
- F_GETLK: 5
- F_SETLK: 6
- F_SETLKW: 7
With -D_FILE_OFFSET_BITS=64:
- F_GETLK: 12
- F_SETLK: 13
- F_SETLKW: 14
At the same time, it has been noticed that there was no test for io lock
with __USE_FILE_OFFSET64, so just add one.
Tested on x86_64-linux-gnu, i686-linux-gnu and
powerpc64le-unknown-linux-gnu.
Resolves: BZ #30804.
Co-authored-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
This interface allows to obtain the associated process ID from the
process file descriptor. It is done by parsing the procps fdinfo
information. Its prototype is:
pid_t pidfd_getpid (int fd)
It returns the associated pid or -1 in case of an error and sets the
errno accordingly. The possible errno values are those from open, read,
and close (used on procps parsing), along with:
- EBADF if the FD is negative, does not have a PID associated, or if
the fdinfo fields contain a value larger than pid_t.
- EREMOTE if the PID is in a separate namespace.
- ESRCH if the process is already terminated.
Checked on x86_64-linux-gnu on Linux 4.15 (no CLONE_PIDFD or waitid
support), Linux 5.4 (full support), and Linux 6.2.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
Returning a pidfd allows a process to keep a race-free handle for a
child process, otherwise, the caller will need to either use pidfd_open
(which still might be subject to TOCTOU) or keep the old racy interface
base on pid_t.
To correct use pifd_spawn, the kernel must support not only returning
the pidfd with clone/clone3 but also waitid (P_PIDFD) (added on Linux
5.4). If kernel does not support the waitid, pidfd return ENOSYS.
It avoids the need to racy workarounds, such as reading the procfs
fdinfo to get the pid to use along with other wait interfaces.
These interfaces are similar to the posix_spawn and posix_spawnp, with
the only difference being it returns a process file descriptor (int)
instead of a process ID (pid_t). Their prototypes are:
int pidfd_spawn (int *restrict pidfd,
const char *restrict file,
const posix_spawn_file_actions_t *restrict facts,
const posix_spawnattr_t *restrict attrp,
char *const argv[restrict],
char *const envp[restrict])
int pidfd_spawnp (int *restrict pidfd,
const char *restrict path,
const posix_spawn_file_actions_t *restrict facts,
const posix_spawnattr_t *restrict attrp,
char *const argv[restrict_arr],
char *const envp[restrict_arr]);
A new symbol is used instead of a posix_spawn extension to avoid
possible issues with language bindings that might track the return
argument lifetime. Although on Linux pid_t and int are interchangeable,
POSIX only states that pid_t should be a signed integer.
Both symbols reuse the posix_spawn posix_spawn_file_actions_t and
posix_spawnattr_t, to void rehash posix_spawn API or add a new one. It
also means that both interfaces support the same attribute and file
actions, and a new flag or file action on posix_spawn is also added
automatically for pidfd_spawn.
Also, using posix_spawn plumbing allows the reusing of most of the
current testing with some changes:
- waitid is used instead of waitpid since it is a more generic
interface.
- tst-posix_spawn-setsid.c is adapted to take into consideration that
the caller can check for session id directly. The test now spawns
itself and writes the session id as a file instead.
- tst-spawn3.c need to know where pidfd_spawn is used so it keeps an
extra file description unused.
Checked on x86_64-linux-gnu on Linux 4.15 (no CLONE_PIDFD or waitid
support), Linux 5.4 (full support), and Linux 6.2.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
These functions allow to posix_spawn and posix_spawnp to use
CLONE_INTO_CGROUP with clone3, allowing the child process to
be created in a different cgroup version 2. These are GNU
extensions that are available only for Linux, and also only
for the architectures that implement clone3 wrapper
(HAVE_CLONE3_WRAPPER).
To create a process on a different cgroupv2, one can use the:
posix_spawnattr_t attr;
posix_spawnattr_init (&attr);
posix_spawnattr_setflags (&attr, POSIX_SPAWN_SETCGROUP);
posix_spawnattr_setcgroup_np (&attr, cgroup);
posix_spawn (...)
Similar to other posix_spawn flags, POSIX_SPAWN_SETCGROUP control
whether the cgroup file descriptor will be used or not with
clone3.
There is no fallback if either clone3 does not support the flag
or if the architecture does not provide the clone3 wrapper, in
this case posix_spawn returns EOPNOTSUPP.
Checked on x86_64-linux-gnu.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
It follows the internal signature:
extern int clone3 (struct clone_args *__cl_args, size_t __size,
int (*__func) (void *__arg), void *__arg);
Checked on mips64el-linux-gnueabihf, mips64el-n32-linux-gnu, and
mipsel-linux-gnu.
It follows the internal signature:
extern int clone3 (struct clone_args *__cl_args, size_t __size,
int (*__func) (void *__arg), void *__arg);
Checked on arm-linux-gnueabihf.
We are requiring Binutils >= 2.41, so explicit relocation syntax is
always supported by the assembler. Use it to reduce one instruction.
Signed-off-by: Xi Ruoyao <xry111@xry111.site>
This patch adds the new F_SEAL_EXEC constant from Linux 6.3 (see Linux
commit 6fd7353829c ("mm/memfd: add F_SEAL_EXEC") to bits/fcntl-linux.h.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
The path auxv[*].a_val could either be an integer or a string,
depending on the a_type value. Use a separate field, a_val_string, to
simplify mechanical parsing of the --list-diagnostics output.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
SYS_modify_ldt requires CONFIG_MODIFY_LDT_SYSCALL to be set in the kernel, which
some distributions may disable for hardening. Check if that's the case (unset)
and mark the test as UNSUPPORTED if so.
Reviewed-by: DJ Delorie <dj@redhat.com>
Signed-off-by: Sam James <sam@gentoo.org>
All callers pass 1 or 0x11 anyway (same meaning according to man page),
but still.
Reviewed-by: DJ Delorie <dj@redhat.com>
Signed-off-by: Sam James <sam@gentoo.org>
strlen-lasx is implemeted by LASX simd instructions(256bit)
strlen-lsx is implemeted by LSX simd instructions(128bit)
strlen-align is implemented by LA basic instructions and never use unaligned memory acess
The nscd daemon caches hosts data from NSS modules verbatim, without
filtering protocol families or sorting them (otherwise separate caches
would be needed for certain ai_flags combinations). The cache
implementation is complete separate from the getaddrinfo code. This
means that rebuilding getaddrinfo is not needed. The only function
actually used is __bump_nl_timestamp from check_pf.c, and this change
moves it into nscd/connections.c.
Tested on x86_64-linux-gnu with -fexceptions, built with
build-many-glibcs.py. I also backported this patch into a distribution
that still supports nscd and verified manually that caching still works.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Linux 6.4 adds new constants PTRACE_SET_SYSCALL_USER_DISPATCH_CONFIG
and PTRACE_GET_SYSCALL_USER_DISPATCH_CONFIG. Add those to all
relevant sys/ptrace.h headers, along with adding the associated
argument structure to bits/ptrace-shared.h (named struct
__ptrace_sud_config there following the usual convention for such
structures).
Tested for x86_64 and with build-many-glibcs.py.
This is the only missing part in struct statvfs.
The LSB calls [f]statfs() deprecated, and its weird types are definitely
off-putting. However, its use is required to get f_type.
Instead, allocate one of the six spares to f_type,
copied directly from struct statfs.
This then becomes a small glibc extension to the standard interface
on Linux and the Hurd, instead of two different interfaces, one of which
is quite odd due to being an ABI type, and there no longer is any reason
to use statfs().
The underlying kernel type is a mess, but all architectures agree on u32
(or more) for the ABI, and all filesystem magicks are 32-bit integers.
We don't lose any generality by using u32, and by doing so we both make
the API consistent with the Hurd, and allow C++
switch(f_type) { case RAMFS_MAGIC: ...; }
Also fix tst-statvfs so that it actually fails;
as it stood, all it did was return 0 always.
Test statfs()' and statvfs()' f_types are the same.
Link: https://lore.kernel.org/linux-man/f54kudgblgk643u32tb6at4cd3kkzha6hslahv24szs4raroaz@ogivjbfdaqtb/t/#u
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
This patch updates the kernel version in the tests tst-mman-consts.py,
tst-mount-consts.py and tst-pidfd-consts.py to 6.4. (There are no new
constants covered by these tests in 6.4 that need any other header
changes.)
Tested with build-many-glibcs.py.
This patch enables the option to influence hwcaps used by PowerPC.
The environment variable, GLIBC_TUNABLES=glibc.cpu.hwcaps=-xxx,yyy,-zzz....,
can be used to enable CPU/ARCH feature yyy, disable CPU/ARCH feature xxx
and zzz, where the feature name is case-sensitive and has to match the ones
mentioned in the file{sysdeps/powerpc/dl-procinfo.c}.
Note that the hwcap tunables only used in the IFUNC selection.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
On __convert_scm_timestamps GCC 6 issues an warning that tvts[0]/tvts[1]
maybe be used uninitialized, however it would be used if type is set to a
value different than 0 (done by either COMPAT_SO_TIMESTAMP_OLD or
COMPAT_SO_TIMESTAMPNS_OLD) which will fallthrough to 'common' label.
It does not show with gcc 7 or more recent versions.
Checked on i686-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Starting with commit 2c6b4b272e
"nptl: Unconditionally use a 32-byte rseq area", the testcase
misc/tst-rseq-disable is UNSUPPORTED as RSEQ_SIG is not defined.
The mentioned commit removes inclusion of sys/rseq.h in nptl/descr.h.
Thus just include sys/rseq.h in the tst-rseq-disable.c as also done
in tst-rseq.c and tst-rseq-nptl.c.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
Bump autoconf requirement to 2.71 to allow regenerating configure on
more recent distributions. autoconf 2.71 has been in Fedora since F36
and is the current version in Debian stable (bookworm). It appears to
be current in Gentoo as well.
All sysdeps configure and preconfigure scripts have also been
regenerated; all changes are trivial transformations that do not affect
functionality.
Signed-off-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
It follows the internal signature:
extern int clone3 (struct clone_args *__cl_args, size_t __size,
int (*__func) (void *__arg), void *__arg);
Checked on s390x-linux-gnu and s390-linux-gnu.
Since the _FORTIFY_SOURCE feature uses some routines of Glibc, they need to
be excluded from the fortification.
On top of that:
- some tests explicitly verify that some level of fortification works
appropriately, we therefore shouldn't modify the level set for them.
- some objects need to be build with optimization disabled, which
prevents _FORTIFY_SOURCE to be used for them.
Assembler files that implement architecture specific versions of the
fortified routines were not excluded from _FORTIFY_SOURCE as there is no
C header included that would impact their behavior.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Optimised implementations for single and double precision, Advanced
SIMD and SVE, copied from Arm Optimized Routines.
As previously, data tables are used via a barrier to prevent
overly aggressive constant inlining. Special-case handlers are
marked NOINLINE to avoid incurring the penalty of switching call
standards unnecessarily.
Reviewed-by: Szabolcs Nagy <szabolcs.nagy@arm.com>
Optimised implementations for single and double precision, Advanced
SIMD and SVE, copied from Arm Optimized Routines. Log lookup table
added as HIDDEN symbol to allow it to be shared between AdvSIMD and
SVE variants.
As previously, data tables are used via a barrier to prevent
overly aggressive constant inlining. Special-case handlers are
marked NOINLINE to avoid incurring the penalty of switching call
standards unnecessarily.
Reviewed-by: Szabolcs Nagy <szabolcs.nagy@arm.com>
Optimised implementations for single and double precision, Advanced
SIMD and SVE, copied from Arm Optimized Routines.
As previously, data tables are used via a barrier to prevent
overly aggressive constant inlining. Special-case handlers are
marked NOINLINE to avoid incurring the penalty of switching call
standards unnecessarily.
Reviewed-by: Szabolcs Nagy <szabolcs.nagy@arm.com>
Linux 6.4 adds the riscv_hwprobe syscall on riscv and enables
memfd_secret on s390. Update syscall-names.list and regenerate the
arch-syscall.h headers with build-many-glibcs.py update-syscalls.
Tested with build-many-glibcs.py.
Trying to mount procfs can fail due multiples reasons: proc is locked
due the container configuration, mount syscall is filtered by a
Linux Secuirty Module, or any other security or hardening mechanism
that Linux might eventually add.
The tests does require a new procfs without binding to parent, and
to fully fix it would require to change how the container was created
(which is out of the scope of the test itself). Instead of trying to
foresee any possible scenario, if procfs can not be mount fail with
unsupported.
Checked on aarch64-linux-gnu.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
The tst-ttyname-direct.c checks the ttyname with procfs mounted in
bind mode (MS_BIND|MS_REC), while tst-ttyname-namespace.c checks
with procfs mount with MS_NOSUID|MS_NOEXEC|MS_NODEV in a new
namespace.
Checked on x86_64-linux-gnu and aarch64-linux-gnu.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
These files could be useful to any port that wants to use ld.so.cache.
Signed-off-by: Sergey Bugaev <bugaevc@gmail.com>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Few tests needed to properly check for asprintf and system calls return
values with _FORTIFY_SOURCE enabled.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
These functions are about to be added to POSIX, under Austin Group
issue 986.
The fortified strlcat implementation does not raise SIGABRT if the
destination buffer does not contain a null terminator, it just
inherits the non-failing regular strlcat behavior.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Container management default seccomp filter [1] only accepts
personality(2) with PER_LINUX, (0x0), UNAME26 (0x20000),
PER_LINUX32 (0x8), UNAME26 | PER_LINUX32, and 0xffffffff (to query
current personality)
Although the documentation only state it is blocked to prevent
'enabling BSD emulation' (PER_BSD, not implemented by Linux), checking
on repository log the real reason is to block ASLR disable flag
(ADDR_NO_RANDOMIZE) and other poorly support emulations.
So handle EPERM and fail as UNSUPPORTED if we can really check for
BZ#19408.
Checked on aarch64-linux-gnu.
[1] https://github.com/moby/moby/blob/master/profiles/seccomp/default.json
Reviewed-by: Florian Weimer <fweimer@redhat.com>
epoll_pwait2(2)'s second argument should be nonnull. We're going to add
__nonnull to the prototype, so let's fix the test accordingly. We can
use a dummy variable to avoid passing NULL.
Reported-by: Adhemerval Zanella Netto <adhemerval.zanella@linaro.org>
Signed-off-by: Alejandro Colomar <alx@kernel.org>
Different than other 64 bit architectures, powerpc64 defines the
LFS POSIX lock constants with values similar to 32 ABI, which
are meant to be used with fcntl64 syscall. Since powerpc64 kABI
does not have fcntl, the constants are adjusted with the
FCNTL_ADJUST_CMD macro.
The 4d0fe291ae changed the logic of generic constants
LFS value are equal to the default values; which is now wrong
for powerpc64.
Fix the value by explicit define the previous glibc constants
(powerpc64 does not need to use the 32 kABI value, but it simplifies
the FCNTL_ADJUST_CMD which should be kept as compatibility).
Checked on powerpc64-linux-gnu and powerpc-linux-gnu.
For architecture with default 64 bit time_t support, the kernel
does not provide LFS and non-LFS values for F_GETLK, F_GETLK, and
F_GETLK (the default value used for 64 bit architecture are used).
This is might be considered an ABI break, but the currenct exported
values is bogus anyway.
The POSIX lockf is not affected since it is aliased to lockf64,
which already uses the LFS values.
Checked on i686-linux-gnu and the new tests on a riscv32.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
The LoongArch glibc was using the value of the SHMLBA macro from common code,
which is __getpagesize() (16k), but this was inconsistent with the value of
the SHMLBA macro in the kernel, which is SZ_64K (64k). This caused several
shmat-related tests in LTP (Linux Test Project) to fail. This commit fixes
the issue by ensuring that the glibc's SHMLBA macro value matches the value
used in the kernel like other architectures.
Use a scratch_buffer rather than either alloca or malloc to reduce the
possibility of a stack overflow.
Suggested-by: Adhemerval Zanella Netto <adhemerval.zanella@linaro.org>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Linux 6.3 adds new constants MFD_NOEXEC_SEAL and MFD_EXEC. Add these
to bits/mman-shared.h (conditional on MFD_NOEXEC_SEAL not already
being defined, similar to the existing conditional on the older MFD_*
macros).
Tested for x86_64.
Linux 6.3 adds six HWCAP2_SME* constants for AArch64; add them to the
corresponding bits/hwcap.h in glibc.
Tested with build-many-glibcs.py for aarch64-linux-gnu.
This patch updates the kernel version in the tests tst-mman-consts.py,
tst-mount-consts.py and tst-pidfd-consts.py to 6.3. (There are no new
constants covered by these tests in 6.3 that need any other header
changes.)
Tested with build-many-glibcs.py.
So I was able to reproduce the hangs in the original source, and debug
it, and fix it. In doing so, I realized that we can't use anything
complex to trigger the thread because that "anything" might also cause
the expected segfault and force everything out of sync again.
Here's what I ended up with, and it doesn't seem to hang where the
original one hung quite often (in a tight while..end loop). The key
changes are:
1. Calls to futex are error checked, with retries, to ensure that the
futexes are actually doing what they're supposed to be doing. In the
original code, nearly every futex call returned an error.
2. The main loop has checks for whether the thread ran or not, and
"unlocks" the thread if it didn't (this is how the original source
hangs).
Note: the usleep() is not for timing purposes, but just to give the
kernel an excuse to run the other thread at that time. The test will
not hang without it, but is more likely to test the right bugfix
if the usleep() is present.
Reflow Makefile.
Sort using scripts/sort-makefile-lines.py.
No code generation changes observed in binary artifacts.
No regressions on x86_64 and i686.
Linux 6.3 has no new syscalls. Update the version number in
syscall-names.list to reflect that it is still current for 6.3.
Tested with build-many-glibcs.py.
This patch enables libmvec on AArch64. The proposed change is mainly
implementing build infrastructure to add the new routines to ABI,
tests and benchmarks. I have demonstrated how this all fits together
by adding implementations for vector cos, in both single and double
precision, targeting both Advanced SIMD and SVE.
The implementations of the routines themselves are just loops over the
scalar routine from libm for now, as we are more concerned with
getting the plumbing right at this point. We plan to contribute vector
routines from the Arm Optimized Routines repo that are compliant with
requirements described in the libmvec wiki.
Building libmvec requires minimum GCC 10 for SVE ACLE. To avoid raising
the minimum GCC by such a big jump, we allow users to disable libmvec
if their compiler is too old.
Note that at this point users have to manually call the vector math
functions. This seems to be acceptable to some downstream users.
Reviewed-by: Szabolcs Nagy <szabolcs.nagy@arm.com>
The standards want msg_lspid/msg_lrpid/shm_cpid/shm_lpid to be pid_t, see BZ
23083 and 23085.
We can leave them __rpc_pid_t on i386 for ABI compatibility, but avoid
hitting the issue on 64bit.
The standards want uid/cuid to be uid_t, gid/cgid to be gid_t and mode to be
mode_t, see BZ 23082.
We can leave them short ints on i386 for ABI compatibility, but avoid
hitting the issue on 64bit.
bits/ipc.h ends up being exactly the same in sysdeps/gnu/ and
sysdeps/unix/sysv/linux/, so remove the latter.
There are reports for hang in __check_pf:
https://github.com/JoeDog/siege/issues/4
It is reproducible only under specific configurations:
1. Large number of cores (>= 64) and large number of threads (> 3X of
the number of cores) with long lived socket connection.
2. Low power (frequency) mode.
3. Power management is enabled.
While holding lock, __check_pf calls make_request which calls __sendto
and __recvmsg. Since __sendto and __recvmsg are cancellation points,
lock held by __check_pf won't be released and can cause deadlock when
thread cancellation happens in __sendto or __recvmsg. Add a cancellation
cleanup handler for __check_pf to unlock the lock when cancelled by
another thread. This fixes BZ #20975 and the siege hang issue.
This makes the prefer_map_32bit_exec tunable no longer Linux-specific.
Signed-off-by: Sergey Bugaev <bugaevc@gmail.com>
Message-Id: <20230423215526.346009-4-bugaevc@gmail.com>
The error handling is moved to sysdeps/ieee754 version with no SVID
support. The compatibility symbol versions still use the wrapper
with SVID error handling around the new code. There is no new symbol
version nor compatibility code on !LIBM_SVID_COMPAT targets
(e.g. riscv).
The ia64 is unchanged, since it still uses the arch specific
__libm_error_region on its implementation. For both i686 and m68k,
which provive arch specific implementation, wrappers are added so
no new symbol are added (which would require to change the
implementations).
It shows an small improvement, the results for fmod:
Architecture | Input | master | patch
-----------------|-----------------|----------|--------
x86_64 (Ryzen 9) | subnormals | 12.5049 | 9.40992
x86_64 (Ryzen 9) | normal | 296.939 | 296.738
x86_64 (Ryzen 9) | close-exponents | 16.0244 | 13.119
aarch64 (N1) | subnormal | 6.81778 | 4.33313
aarch64 (N1) | normal | 155.620 | 152.915
aarch64 (N1) | close-exponents | 8.21306 | 5.76138
armhf (N1) | subnormal | 15.1083 | 14.5746
armhf (N1) | normal | 244.833 | 241.738
armhf (N1) | close-exponents | 21.8182 | 22.457
Checked on x86_64-linux-gnu, i686-linux-gnu, and aarch64-linux-gnu.
Reviewed-by: Wilco Dijkstra <Wilco.Dijkstra@arm.com>
Linux kernel uses AT_HWCAP2 to indicate if FSGSBASE instructions are
enabled. If the HWCAP2_FSGSBASE bit in AT_HWCAP2 is set, FSGSBASE
instructions can be used in user space. Define dl_check_hwcap2 to set
the FSGSBASE feature to active on Linux when the HWCAP2_FSGSBASE bit is
set.
Add a test to verify that FSGSBASE is active on current kernels.
NB: This test will fail if the kernel doesn't set the HWCAP2_FSGSBASE
bit in AT_HWCAP2 while fsgsbase shows up in /proc/cpuinfo.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
And make always supported. The configure option was added on glibc 2.25
and some features require it (such as hwcap mask, huge pages support, and
lock elisition tuning). It also simplifies the build permutations.
Changes from v1:
* Remove glibc.rtld.dynamic_sort changes, it is orthogonal and needs
more discussion.
* Cleanup more code.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Instead define the required fields in system dependend files. The only
system dependent definition is FILENAME_MAX, which should match POSIX
PATH_MAX, and it is obtained from either kernel UAPI or mach headers.
Currently set pre-defined value from current kernels.
It avoids a circular dependendy when including stdio.h in
gen-as-const-headers files.
Checked on x86_64-linux-gnu and i686-linux-gnu
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
They are both used by __libc_freeres to free all library malloc
allocated resources to help tooling like mtrace or valgrind with
memory leak tracking.
The current scheme uses assembly markers and linker script entries
to consolidate the free routine function pointers in the RELRO segment
and to be freed buffers in BSS.
This patch changes it to use specific free functions for
libc_freeres_ptrs buffers and call the function pointer array directly
with call_function_static_weak.
It allows the removal of both the internal macros and the linker
script sections.
Checked on x86_64-linux-gnu, i686-linux-gnu, and aarch64-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Binutils 2.40 sets EF_LARCH_OBJABI_V1 for shared objects:
$ ld --version | head -n1
GNU ld (GNU Binutils) 2.40
$ echo 'int dummy;' > dummy.c
$ cc dummy.c -shared
$ readelf -h a.out | grep Flags
Flags: 0x43, DOUBLE-FLOAT, OBJ-v1
We need to ignore it in ldconfig or ldconfig will consider all shared
objects linked by Binutils 2.40 "unsupported". Maybe we should stop
setting EF_LARCH_OBJABI_V1 for shared objects, but Binutils 2.40 is
already released and we cannot change it.
For better debug experience use separate code block with extra
cfi_* directives to run child (same as in __clone3).
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Use the clone3 wrapper on ARC. It doesn't care about stack alignment.
All callers should provide an aligned stack.
It follows the internal signature:
extern int clone3 (struct clone_args *__cl_args, size_t __size,
int (*__func) (void *__arg), void *__arg);
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Between versions v2.11 and v2.12 struct ntptimeval got new fields.
That wasn't a problem because new function ntp_gettimex was created
(and made default) to support new struct. Old ntp_gettime was not
using new fields so it was safe to call with old struct
definition. Then commits 5613afe9e3 and b6ad64b907 (added for
64 bit time_t support), ntp_gettime start setting new fields.
Sets fields manually to maintain compatibility with v2.11 struct
definition.
Resolves#30156
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
This patch updates the kernel version in the tests tst-mman-consts.py,
tst-mount-consts.py and tst-pidfd-consts.py to 6.2. (There are no new
constants covered by these tests in 6.2 that need any other header
changes, and the removed MAP_VARIABLE for hppa was addressed
separately.)
Tested with build-many-glibcs.py.
C2x adds binary integer constants starting with 0b or 0B, and supports
those constants for the %i scanf format (in addition to the %b format,
which isn't yet implemented for scanf in glibc). Implement that scanf
support for glibc.
As with the strtol support, this is incompatible with previous C
standard versions, in that such an input string starting with 0b or 0B
was previously required to be parsed as 0 (with the rest of the input
potentially matching subsequent parts of the scanf format string).
Thus this patch adds 12 new __isoc23_* functions per long double
format (12, 24 or 36 depending on how many long double formats the
glibc configuration supports), with appropriate header redirection
support (generally very closely following that for the __isoc99_*
scanf functions - note that __GLIBC_USE (DEPRECATED_SCANF) takes
precedence over __GLIBC_USE (C2X_STRTOL), so the case of GNU
extensions to C89 continues to get old-style GNU %a and does not get
this new feature). The function names would remain as __isoc23_* even
if C2x ends up published in 2024 rather than 2023.
When scanf %b support is added, I think it will be appropriate for all
versions of scanf to follow C2x rules for inputs to the %b format
(given that there are no compatibility concerns for a new format).
Tested for x86_64 (full glibc testsuite). The first version was also
tested for powerpc (32-bit) and powerpc64le (stdio-common/ and wcsmbs/
tests), and with build-many-glibcs.py.
Linux 6.2 adds six new Arm HWCAP values and two new HWCAP2 values; add
them to glibc's Arm bits/hwcap.h, with corresponding dl-procinfo.c and
dl-procinfo.h updates.
Tested with build-many-glibcs.py for arm-linux-gnueabi.
The Linux kernel upstream commit 71bdea6f798b ("parisc: Align parisc
MADV_XXX constants with all other architectures") dropped the
parisc-specific MADV_* values in favour of the same constants as
other architectures. In the same commit a wrapper was added which
translates the old values to the standard MADV_* values to avoid
breakage of existing programs.
This upstream patch has been downported to all stable kernel trees as
well.
This patch now drops the parisc specific constants from glibc to
allow newly compliled programs to use the standard MADV_* constants.
v2: Added NEWS section, based on feedback from Florian Weimer
Signed-off-by: Helge Deller <deller@gmx.de>
Linux 6.2 has no new syscalls. Update the version number in
syscall-names.list to reflect that it is still current for 6.2.
Tested with build-many-glibcs.py.
Crossing 2GB boundaries with indirect calls and jumps can use more
branch prediction resources on Intel Golden Cove CPU (see the
"Misprediction for Branches >2GB" section in Intel 64 and IA-32
Architectures Optimization Reference Manual.) There is visible
performance improvement on workloads with many PLT calls when executable
and shared libraries are mmapped below 2GB. Add the Prefer_MAP_32BIT_EXEC
bit so that mmap will try to map executable or denywrite pages in shared
libraries with MAP_32BIT first.
NB: Prefer_MAP_32BIT_EXEC reduces bits available for address space
layout randomization (ASLR), which is always disabled for SUID programs
and can only be enabled by the tunable, glibc.cpu.prefer_map_32bit_exec,
or the environment variable, LD_PREFER_MAP_32BIT_EXEC. This works only
between shared libraries or between shared libraries and executables with
addresses below 2GB. PIEs are usually loaded at a random address above
4GB by the kernel.
Linux 6.2 removed the hppa compatibility MAP_VARIABLE define. That
means that, whether or not we remove it in glibc, it needs to be
ignored in tst-mman-consts.py (since this macro comparison
infrastructure expects that new kernel header versions only add new
macros, not remove old ones).
Tested with build-many-glibcs.py for hppa-linux-gnu (Linux 6.2
headers).
The default Linux implementation already handled the Linux generic
ABIs interface used on newer architectures, so there is no need to
Imply the generic any longer.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
And disable if kernel does not support it.
Checked on x86_64-linux-gnu and i686-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
And disable if kernel does not support it.
Checked on x86_64-linux-gnu and i686-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
And remove redundant entries on other architectures Version. The
version for fallocate64 was supposed to be 2.10, but it was then
added to 32-bit platforms in 2.11 because it mistakenly wasn't
exported for them in 2.10 (see the commit message for
1f3615a1c9).
The linux/generic did not exist before 2.15, i.e. when the tile
ports were added (and microblaze did not exist before 2.18), which
explains those differences but also illustrates that "2.11 for 32-bit,
2.10 for 64-bit" should be sufficient since versions older than the
minimum for the architecture are automatically adjusted.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
The ARCv2 ABI requires 4 byte stack pointer alignment. Don't allow to
use unaligned child stack in clone. As the stack grows down,
align it down.
This was pointed by misc/tst-misalign-clone-internal and
misc/tst-misalign-clone tests. Stack alignmet fixes these tests
fails.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
C2x adds binary integer constants starting with 0b or 0B, and supports
those constants in strtol-family functions when the base passed is 0
or 2. Implement that strtol support for glibc.
As discussed at
<https://sourceware.org/pipermail/libc-alpha/2020-December/120414.html>,
this is incompatible with previous C standard versions, in that such
an input string starting with 0b or 0B was previously required to be
parsed as 0 (with the rest of the string unprocessed). Thus, as
proposed there, this patch adds 20 new __isoc23_* functions with
appropriate header redirection support. This patch does *not* do
anything about scanf %i (which will need 12 new functions per long
double variant, so 12, 24 or 36 depending on the glibc configuration),
instead leaving that for a future patch. The function names would
remain as __isoc23_* even if C2x ends up published in 2024 rather than
2023.
Making this change leads to the question of what should happen to
internal uses of these functions in glibc and its tests. The header
redirection (which applies for _GNU_SOURCE or any other feature test
macros enabling C2x features) has the effect of redirecting internal
uses but without those uses then ending up at a hidden alias (see the
comment in include/stdio.h about interaction with libc_hidden_proto).
It seems desirable for the default for internal uses to be the same
versions used by normal code using _GNU_SOURCE, so rather than doing
anything to disable that redirection, similar macro definitions to
those in include/stdio.h are added to the include/ headers for the new
functions.
Given that the default for uses in glibc is for the redirections to
apply, the next question is whether the C2x semantics are correct for
all those uses. Uses with the base fixed to 10, 16 or any other value
other than 0 or 2 can be ignored. I think this leaves the following
internal uses to consider (an important consideration for review of
this patch will be both whether this list is complete and whether my
conclusions on all entries in it are correct):
benchtests/bench-malloc-simple.c
benchtests/bench-string.h
elf/sotruss-lib.c
math/libm-test-support.c
nptl/perf.c
nscd/nscd_conf.c
nss/nss_files/files-parse.c
posix/tst-fnmatch.c
posix/wordexp.c
resolv/inet_addr.c
rt/tst-mqueue7.c
soft-fp/testit.c
stdlib/fmtmsg.c
support/support_test_main.c
support/test-container.c
sysdeps/pthread/tst-mutex10.c
I think all of these places are OK with the new semantics, except for
resolv/inet_addr.c, where the POSIX semantics of inet_addr do not
allow for binary constants; thus, I changed that file (to use
__strtoul_internal, whose semantics are unchanged) and added a test
for this case. In the case of posix/wordexp.c I think accepting
binary constants is OK since POSIX explicitly allows additional forms
of shell arithmetic expressions, and in stdlib/fmtmsg.c SEV_LEVEL is
not in POSIX so again I think accepting binary constants is OK.
Functions such as __strtol_internal, which are only exported for
compatibility with old binaries from when those were used in inline
functions in headers, have unchanged semantics; the __*_l_internal
versions (purely internal to libc and not exported) have a new
argument to specify whether to accept binary constants.
As well as for the standard functions, the header redirection also
applies to the *_l versions (GNU extensions), and to legacy functions
such as strtoq, to avoid confusing inconsistency (the *q functions
redirect to __isoc23_*ll rather than needing their own __isoc23_*
entry points). For the functions that are only declared with
_GNU_SOURCE, this means the old versions are no longer available for
normal user programs at all. An internal __GLIBC_USE_C2X_STRTOL macro
is used to control the redirections in the headers, and cases in glibc
that wish to avoid the redirections - the function implementations
themselves and the tests of the old versions of the GNU functions -
then undefine and redefine that macro to allow the old versions to be
accessed. (There would of course be greater complexity should we wish
to make any of the old versions into compat symbols / avoid them being
defined at all for new glibc ABIs.)
strtol_l.c has some similarity to strtol.c in gnulib, but has already
diverged some way (and isn't listed at all at
https://sourceware.org/glibc/wiki/SharedSourceFiles unlike strtoll.c
and strtoul.c); I haven't made any attempts at gnulib compatibility in
the changes to that file.
I note incidentally that inttypes.h and wchar.h are missing the
__nonnull present on declarations of this family of functions in
stdlib.h; I didn't make any changes in that regard for the new
declarations added.
It follows the internal signature:
extern int clone3 (struct clone_args *__cl_args, size_t __size,
int (*__func) (void *__arg), void *__arg);
The powerpc64 ABI requires an initial stackframe so the child can
store/restore the TOC. It is create prior calling clone3 by
adjusting the stack size (since kernel will compute the stack as
stack plus size).
Checked on powerpc64-linux-gnu (power8, kernel 6.0) and
powerpc64le-linux-gnu (power9, kernel 4.18).
Reviewed-by: Paul E. Murphy <murphyp@linux.ibm.com>
The hard float abi and hard float are different,
Hard float abi: Use float register to pass float type arguments.
Hard float: Enable the hard float ISA feature.
So the with_fp_cond cannot represent these two features. When
-mfloat-abi=softfp, the float abi is soft and hard float is enabled.
So add 'with_hard_float_abi' in preconfigure and define 'CSKY_HARD_FLOAT_ABI'
if float abi is hard, and use 'CSKY_HARD_FLOAT_ABI' to determine
dynamic linker because it is what determines compatibility.
And with_fp_cond is still needed to tell glibc whether to enable
hard floating feature.
In addition, use AC_TRY_COMMAND to test gcc to ensure compatibility
between different versions of gcc. The original way has a problem
that __CSKY_HARD_FLOAT_FPU_SF__ means the target only has single
hard float-points ISA, so it's not defined in CPUs like ck810f.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
This patch enables the option to influence hwcaps and stfle bits used
by the s390 specific ifunc-resolvers. The currently x86-specific
tunable glibc.cpu.hwcaps is also used on s390x to achieve the task. In
addition the user can also set a CPU arch-level like z13 instead of
single HWCAP and STFLE features.
Note that the tunable only handles the features which are really used
in the IFUNC-resolvers. All others are ignored as the values are only
used inside glibc. Thus we can influence:
- HWCAP_S390_VXRS (z13)
- HWCAP_S390_VXRS_EXT (z14)
- HWCAP_S390_VXRS_EXT2 (z15)
- STFLE_MIE3 (z15)
The influenced hwcap/stfle-bits are stored in the s390-specific
cpu_features struct which also contains reserved fields for future
usage.
The ifunc-resolvers and users of stfle bits are adjusted to use the
information from cpu_features struct.
On 31bit, the ELF_MACHINE_IRELATIVE macro is now also defined.
Otherwise the new ifunc-resolvers segfaults as they depend on
the not yet processed_rtld_global_ro@GLIBC_PRIVATE relocation.
Add an optimization to avoid calling clone3 when glibc detects that
there is no kernel support. It also adds __ASSUME_CLONE3, which allows
skipping this optimization and issuing the clone3 syscall directly.
It does not handle the the small window between 5.3 and 5.5 for
posix_spawn (CLONE_CLEAR_SIGHAND was added in 5.5).
Checked on x86_64-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
It follow the internal signature:
extern int clone3 (struct clone_args *__cl_args, size_t __size,
int (*__func) (void *__arg), void *__arg);
Checked on aarch64-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
The clone3 flag resets all signal handlers of the child not set to
SIG_IGN to SIG_DFL. It allows to skip most of the sigaction calls
to setup child signal handling, where previously a posix_spawn
had to issue 2 times NSIG sigaction calls (one to obtain the current
disposition and another to set either SIG_DFL or SIG_IGN).
With POSIX_SPAWN_SETSIGDEF the child will setup the signal for the case
where the disposition is SIG_IGN.
The code must handle the fallback where clone3 is not available. This is
done by splitting __clone_internal_fallback from __clone_internal.
Checked on x86_64-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
All internal callers of __clone3 should provide an already aligned
stack. Removing the stack alignment in __clone3 is a net gain: it
simplifies the internal function contract (mask/unmask signals) along
with the arch-specific code.
Checked on x86_64-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Different than kernel, clone3 returns EINVAL for NULL struct
clone_args or function pointer. This is similar to clone
interface that return EINVAL for NULL function argument.
It also clean up the Linux clone3.h interface, since it not
currently exported.
Checked on x86_64-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
There is no need to issue another sigaction if the disposition is
already SIG_DFL.
Checked on x86_64-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
The kernel actually verifies it, and a garbage value in the register
causes improper system call failures.
Fixes commit c1c0dea388 ("Linux: Remove epoll_create,
inotify_init from syscalls.list") and commit d1d23b1342
("Lninux: consolidate epoll_create implementation").
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
This patch increases the value of SIGSTKSZ and MINSIGSTKSZ
for powerpc64 similar to the kernel commit
2f82ec19757f58549467db568c56e7dfff8af283 to allow
further expansion of the signal stack frame size.
This patch updates the kernel version in the tests tst-mman-consts.py,
tst-mount-consts.py and tst-pidfd-consts.py to 6.1. (There are no new
constants covered by these tests in 6.1 that need any other header
changes.)
Tested with build-many-glibcs.py.
Their presence causes stub warnings to be created on architectures
which do not implement them.
Fixes commit d1d23b1342 ("Lninux: consolidate
epoll_create implementation") and commit 842128f160
("Linux: consolidate inotify_init implementation").
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
A recent GCC change resulted in localplt test failures on sparc64
because of references to _Qp_fgt. This is analogous to all the other
floating-point symbols allowed in localplt.data, so it seems
appropriate to allow this one as well.
Tested with build-many-glibcs.py for sparc64-linux-gnu (GCC mainline),
where it fixes the test failure.
The generic (sysdeps/unix/sysv/linux/generic/bits/typesizes.h) and
default (bits/typesizes.h) differs in two fields:
bits/typesizes.h Linux generic
__NLINK_T_TYPE __UWORD_TYPE __U32_TYPE
__BLKSIZE_T_TYPE __SLONGWORD_TYPE __S32_TYPE
Sinceit leads to different C++ mangling names, the default typesize.h
is copied for the requires archtiectures and the generic is make the
default Linux one.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
It is currently used for csky, arc, nios2, and or1k. Newer 64 bit
architecture, like riscv32 and loongarch, reimplement it to override
F_GETLK64/F_SETLK64/F_SETLKW64.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
The includes chain is added on each architecture sysdep.h and
the __NR__llseek hack is moved to lseek.c and lseek64.c.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
And disable if kernel does not support it.
Checked on x86_64-linux-gnu and i686-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
And disable if kernel does not support it.
Checked on x86_64-linux-gnu and i686-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
And disable if kernel does not support it.
Checked on x86_64-linux-gnu and i686-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
And disable if kernel does not support it.
Checked on x86_64-linux-gnu and i686-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
And disable if kernel does not support it.
Checked on x86_64-linux-gnu and i686-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
This is similar to other LFS consolidation, where the non-LFS is only
built if __OFF_T_MATCHES_OFF64_T is not defined and the LFS version
is aliased to non-LFS name if __OFF_T_MATCHES_OFF64_T is defined.
For non-LFS variant, use sendfile syscall if defined, otherwise use
sendfile64 plus the offset overflow check (as generic implementation).
Checked on x86_64-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
Use unlink syscall if defined, otherwise use unlinkat.
Checked on x86_64-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
Use symlink syscall if defined, otherwise use symlinkat.
Checked on x86_64-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
Use rmdir syscall if defined, otherwise use unlinkat.
Checked on x86_64-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
Use readlink syscall if defined, otherwise readlinkat.
Checked on x86_64-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
Use mkdir syscall if defined, otherwise use mkdirat.
Checked on x86_64-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
Use link syscall if defined, otherwise use linkat.
Checked on x86_64-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
Use lchown syscall if defined, otherwise use fchownat.
Checked on x86_64-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
Use inotify_init syscall if defined, otherwise use inotify_init1.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
Use epoll_create syscall if defined, otherwise use epoll_create1.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
Use dup2 syscall if defined, otherwise use dup3.
Checked on x86_64-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
Use chown syscall if defined, otherwise use fchownat.
Checked on x86_64-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
Use chmod syscall if defined, otherwise use fchmodat.
Checked on x86_64-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
Use the generic implementation as the default, since the syscall
is supported by all architectures.
Also cleanup some headers and remove the INTERNAL_SYSCALL_ERROR_P
usage (the INTERNAL_SYSCALL_CALL macro already returns an negative
value if an error occurs).
The linux syscall ABI returns long, so the generic syscall code for
linux should use long for the return value.
This fixes the truncation of the return value of the syscall function
when that does not fit into an int.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Currently glibc uses in_time_t_range to detects time_t overflow,
and if it occurs fallbacks to 64 bit syscall version.
The function name is confusing because internally time_t might be
either 32 bits or 64 bits (depending on __TIMESIZE).
This patch refactors the in_time_t_range by replacing it with
in_int32_t_range for the case to check if the 64 bit time_t syscall
should be used.
The in_time_t range is used to detect overflow of the
syscall return value.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Old applications pass __IPC_64 as part of the command argument because
old glibc did not check for unknown commands, and passed through the
arguments directly to the kernel, without adding __IPC_64.
Applications need to continue doing that for old glibc compatibility,
so this commit enables this approach in current glibc.
For msgctl and shmctl, if no translation is required, make
direct system calls, as we did before the time64 changes. If
translation is required, mask __IPC_64 from the command argument.
For semctl, the union-in-vararg argument handling means that
translation is needed on all architectures.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
RISC-V architecture extends the cache information for level 3 cache
in AUX vector in Linux v.6.1-rc1. This patch supports sysconf to get
the level 3 cache information.
Reviewed-by: Palmer Dabbelt <palmer@rivosinc.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Similar to ppoll, the poll.h header needs to redirect the poll call
to a proper fortified ppoll with 64 bit time_t support.
The implementation is straightforward, just need to add a similar
check as __poll_chk and call the 64 bit time_t ppoll version. The
debug fortify tests are also extended to cover 64 bit time_t for
affected ABIs.
Unfortunately it requires an aditional symbol, which makes backport
tricky. One possibility is to add a static inline version if compiler
supports is and call abort instead of __chk_fail, so fortified version
will call __poll64 in the end.
Another possibility is to just remove the fortify support for
_TIME_BITS=64.
Checked on i686-linux-gnu.
This makes it more likely that the compiler can compute the strlen
argument in _startup_fatal at compile time, which is required to
avoid a dependency on strlen this early during process startup.
Reviewed-by: Szabolcs Nagy <szabolcs.nagy@arm.com>
The old exception handling implementation used function interposition
to replace the dynamic loader implementation (no TLS support) with the
libc implementation (TLS support). This results in problems if the
link order between the dynamic loader and libc is reversed (bug 25486).
The new implementation moves the entire implementation of the
exception handling functions back into the dynamic loader, using
THREAD_GETMEM and THREAD_SETMEM for thread-local data support.
These depends on Hurd support for these macros, added in commit
b65a82e4e7 ("hurd: Add THREAD_GET/SETMEM/_NC").
One small obstacle is that the exception handling facilities are used
before the TCB has been set up, so a check is needed if the TCB is
available. If not, a regular global variable is used to store the
exception handling information.
Also rename dl-error.c to dl-catch.c, to avoid confusion with the
dlerror function.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Commit 6e8a0aac2f ("time: Fix overflow itimer tests on 32-bit
systems") changed in_time_t_range to assume a 32-bit time_t. This broke
fstatat on MIPSn64 that was using it with a 64-bit time_t due to
difference between stat and stat64. This commit fix that by adding a
MIPSn64 specific version, which bypasses the EOVERFLOW tests.
Resolves: BZ #29730
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
The extension header is two 32bit words and in the last header both
should be 0. There is plenty space in the __reserved area, but it's
better not to write more than we mean to.
The generic Linux struct_stat misses the conditionals to use
bits/struct_stat_time64_helper.h in the __USE_TIME_BITS64 for
architecture that uses __TIMESIZE == 32 (currently csky and nios2).
Since newer ports should not support 32 bit time_t, the generic
implementation should be used as default.
For arm, hppa, and sh a copy of default struct_stat is added,
while for csky and nios a new one based on generic is used, along
with conditionals to use bits/struct_stat_time64_helper.h.
The default struct_stat is also replaced with the generic one.
Checked on aarch64-linux-gnu and arm-linux-gnueabihf.
Linux 6.0 adds a constant ADDRB, a termios c_cflag bit, to its
include/uapi/asm-generic/termbits-common.h.
Add it accordingly to glibc's bits/termios-c_cflag.h headers. As
other constants in these headers are generally in octal, I converted
the value to octal to match. As ADDRB isn't in a POSIX-reserved
namespace, I made it conditional on __USE_MISC.
Tested for x86_64.
The current macros uses pid as signed value, which triggers a compiler
warning for process and thread timers. Replace MAKE_PROCESS_CPUCLOCK
with static inline function that expects the pid as unsigned. These
are similar to what Linux does internally.
Checked on x86_64-linux-gnu.
Reviewed-by: Arjun Shankar <arjun@redhat.com>
This allows us to define a generic no-op version of PTR_MANGLE and
PTR_DEMANGLE. In the future, we can use PTR_MANGLE and PTR_DEMANGLE
unconditionally in C sources, avoiding an unintended loss of hardening
due to missing include files or unlucky header inclusion ordering.
In i386 and x86_64, we can avoid a <tls.h> dependency in the C
code by using the computed constant from <tcb-offsets.h>. <sysdep.h>
no longer includes these definitions, so there is no cyclic dependency
anymore when computing the <tcb-offsets.h> constants.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Removal of legacy hwcaps support from the dynamic loader left
no users of _dl_string_hwcap.
Signed-off-by: Javier Pello <devel@otheo.eu>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
This patch updates the kernel version in the tests tst-mman-consts.py,
tst-mount-consts.py and tst-pidfd-consts.py to 6.0. (There are no new
constants covered by these tests in 6.0 that need any other header
changes.)
Tested with build-many-glibcs.py.
Linux 6.0 has no new syscalls. Update the version number in
syscall-names.list to reflect that it is still current for 6.0.
Tested with build-many-glibcs.py.
Use INTERNAL_SYSCALL_CALL instead of INLINE_SYSCALL_CALL. This
requires emulate the semantic for hurd call (so __arc4random_buf
uses the fallback).
Checked on x86_64-linux-gnu.
Reviewed-by: Wilco Dijkstra <Wilco.Dijkstra@arm.com>
Using an unsigned type prevents the fallback to be used if kernel
does not support getrandom syscall.
Checked on x86_64-linux-gnu.
Reviewed-by: Wilco Dijkstra <Wilco.Dijkstra@arm.com>
Replace atomic_increment and atomic_increment_val with atomic_fetch_add_relaxed.
One case in sem_post.c uses release semantics (see comment above it).
The others are simple counters and do not protect any shared data from
concurrent accesses.
Passes regress on AArch64.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
QEMU does not support support set_robust_list. Thus, we need
to enable detection of set_robust_list system call.
Signed-off-by: John David Anglin <dave.anglin@bell.net>
It avoid a possible compiler warning where right size of operator
is converted from a negative value to unsigned.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
A new internal definition, __LIBC_LOCK_ALIGNMENT, is used to force
the 4-byte alignment only for m68k, other architecture keep the
natural alignment of the type used internally (and hppa does not
require 16-byte alignment for kernel-assisted CAS).
Reviewed-by: Florian Weimer <fweimer@redhat.com>
POSIX does not say this value is special. For example, old XFS file
systems may still use inode number zero.
Also update the comment regarding ENOENT. Linux may return ENOENT
for some file systems.
__syscall_error may end up farther than 1MiB away from a caller,
especially when linking statically large binaries. tail allows for
4GiB jumps and is reduced to j when a linked symbol is within range.
Fixes: 36960f0c76 ("RISC-V: Linux Syscall Interface")
Fixes: 7f33b09c65 ("RISC-V: Linux ABI")
Signed-off-by: Łukasz Stelmach <l.stelmach@samsung.com>
On s390x syscalls are triggered by svc instruction. One can
pass the syscall number encoded in the instruction "svc 123"
or by storing it in r1:
lghi r1,123
svc 0
If the syscall number is encoded in the instruction, this can
cause broken syscall restarts. Therefore this patch is now just
passing the syscall number in r1.
See also kernel-commit:
"s390/signal: switch to using vdso for sigreturn and syscall restart"
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/arch/s390/[%e2%80%a6]call.c?h=v6.0-rc1&id=df29a7440c4b5c65765c8f60396b3b13063e24e9
As information, the "svc 0" feature was introduced in kernel 2.5.62:
commit b5aad611393ef2e132e3648fa4c6e56a9cfa8708
Changes to these arrays are often backported to stable releases,
but additions to these arrays shift the offsets of the following
_rltd_global_ro members, thus breaking the GLIBC_PRIVATE ABI.
Obviously, this change is itself an internal ABI break, but at least
it will avoid further ABI breaks going forward.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Linux 5.19 adds more HWCAP2_* values for AArch64; add these to its
bits/hwcap.h header in glibc.
Tested with build-many-glibcs.py for aarch64-linux-gnu.
Linux 5.19 adds a new accounting flag AGROUP; add it to the
enumeration in sys/acct.h.
This shows up that the Alpha-specific variant of this header has a
different set of constants and struct acct, which appear to be the
constants and structure layout from Linux 2.0. These were changed
some time between Linux 2.0 and Linux 2.2; I see no evidence of an
Alpha-specific layout or set of constants, but haven't checked the
detailed Linux kernel history between those versions. Rather, it
looks like tha Alpha-specific header was originally needed because of
the use of types in the kernel structure (such as uid_t and gid_t)
that had different sizes on Alpha, and when glibc was updated for
changes to the structure and constants in the kernel
1998-10-02 Andreas Jaeger <aj@arthur.rhein-neckar.de>
* sysdeps/unix/sysv/linux/sys/acct.h: Bring in sync with current
linux 2.1 version.
that simply omitted to do anything about the Alpha version.
Thus, remove the Alpha version in order to get the updated definitions
into use on Alpha, as I don't think the interfaces are actually
different for Alpha with any kernel version supported by glibc.
Tested for x86_64, and with build-many-glibcs.py for alpha-linux-gnu.
The kernel special-cases the zero argument for alpha brk, and we can
use that to restore the generic Linux error handling behavior.
Fixes commit b57ab258c1 ("Linux:
Introduce __brk_call for invoking the brk system call").
The #ifdef FSOPEN_CLOEXEC check did not work because the macro
was always defined in this header prior to the check, so that
the <linux/mount.h> contents did not matter.
Fixes commit 774058d729
("linux: Fix sys/mount.h usage with kernel headers").
I.e. from sysdeps/unix/sysv/linux/bits/in.h to netinet/in.h
It is following both the BSD and Linux definitions.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
Now that kernel exports linux/mount.h and includes it on linux/fs.h,
its definitions might clash with glibc exports sys/mount.h. To avoid
the need to rearrange the Linux header to be always after glibc one,
the glibc sys/mount.h is changed to:
1. Undefine the macros also used as enum constants. This covers prior
inclusion of <linux/mount.h> (for instance MS_RDONLY).
2. Include <linux/mount.h> based on the usual __has_include check
(needs to use __has_include ("linux/mount.h") to paper over GCC
bugs.
3. Define enum fsconfig_command only if FSOPEN_CLOEXEC is not defined.
(FSOPEN_CLOEXEC should be a very close proxy.)
4. Define struct mount_attr if MOUNT_ATTR_SIZE_VER0 is not defined.
(Added in the same commit on the Linux side.)
This patch also adds some tests to check if including linux/fs.h and
linux/mount.h after and before sys/mount.h does work.
Checked on x86_64-linux-gnu.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
So far this test checks if pidfd_open-syscall is supported,
which was introduced with linux 5.3.
The process_madvise-syscall was introduced with linux 5.10.
Thus you'll get FAILs if you are running a kernel in between.
This patch adds a check if the first process_madvise-syscall
returns ENOSYS and in this case will fail with UNSUPPORTED.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
The older libc versions are obsolete for over twenty years now.
This patch removes the special flags for libc5 and libc4 and assumes
that all libraries cached are libc6 compatible and use FLAG_ELF_LIBC6.
Checked with a build for all affected architectures.
Co-authored-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
exit only terminates the current thread, not the whole process, so it
is the wrong fallback system call in this context. All supported
Linux versions implement the exit_group system call anyway.
This patch updates the kernel version in the tests tst-mman-consts.py,
tst-mount-consts.py and tst-pidfd-consts.py to 5.18. (There are no
new constants covered by these tests in 5.19, or in 5.17 or 5.18 in
the case of tst-mount-consts.py that previously used version 5.16,
that need any other header changes.)
Tested with build-many-glibcs.py.
Linux 5.19 has no new syscalls, but enables memfd_secret in the uapi
headers for RISC-V. Update the version number in syscall-names.list
to reflect that it is still current for 5.19 and regenerate the
arch-syscall.h headers with build-many-glibcs.py update-syscalls.
Tested with build-many-glibcs.py.
The inline and library functions that the CMSG_NXTHDR macro may expand
to increment the pointer to the header before checking the stride of
the increment against available space. Since C only allows incrementing
pointers to one past the end of an array, the increment must be done
after a length check. This commit fixes that and includes a regression
test for CMSG_FIRSTHDR and CMSG_NXTHDR.
The Linux, Hurd, and generic headers are all changed.
Tested on Linux on armv7hl, i686, x86_64, aarch64, ppc64le, and s390x.
[BZ #28846]
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
pidfd_getfd can fail for a valid pidfd with errno EPERM for various
reasons in a restricted environment. Use FAIL_UNSUPPORTED in that case.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Rather than buffering 16 MiB of entropy in userspace (by way of
chacha20), simply call getrandom() every time.
This approach is doubtlessly slower, for now, but trying to prematurely
optimize arc4random appears to be leading toward all sorts of nasty
properties and gotchas. Instead, this patch takes a much more
conservative approach. The interface is added as a basic loop wrapper
around getrandom(), and then later, the kernel and libc together can
work together on optimizing that.
This prevents numerous issues in which userspace is unaware of when it
really must throw away its buffer, since we avoid buffering all
together. Future improvements may include userspace learning more from
the kernel about when to do that, which might make these sorts of
chacha20-based optimizations more possible. The current heuristic of 16
MiB is meaningless garbage that doesn't correspond to anything the
kernel might know about. So for now, let's just do something
conservative that we know is correct and won't lead to cryptographic
issues for users of this function.
This patch might be considered along the lines of, "optimization is the
root of all evil," in that the much more complex implementation it
replaces moves too fast without considering security implications,
whereas the incremental approach done here is a much safer way of going
about things. Once this lands, we can take our time in optimizing this
properly using new interplay between the kernel and userspace.
getrandom(0) is used, since that's the one that ensures the bytes
returned are cryptographically secure. But on systems without it, we
fallback to using /dev/urandom. This is unfortunate because it means
opening a file descriptor, but there's not much of a choice. Secondly,
as part of the fallback, in order to get more or less the same
properties of getrandom(0), we poll on /dev/random, and if the poll
succeeds at least once, then we assume the RNG is initialized. This is a
rough approximation, as the ancient "non-blocking pool" initialized
after the "blocking pool", not before, and it may not port back to all
ancient kernels, though it does to all kernels supported by glibc
(≥3.2), so generally it's the best approximation we can do.
The motivation for including arc4random, in the first place, is to have
source-level compatibility with existing code. That means this patch
doesn't attempt to litigate the interface itself. It does, however,
choose a conservative approach for implementing it.
Cc: Adhemerval Zanella Netto <adhemerval.zanella@linaro.org>
Cc: Florian Weimer <fweimer@redhat.com>
Cc: Cristian Rodríguez <crrodriguez@opensuse.org>
Cc: Paul Eggert <eggert@cs.ucla.edu>
Cc: Mark Harris <mark.hsj@gmail.com>
Cc: Eric Biggers <ebiggers@kernel.org>
Cc: linux-crypto@vger.kernel.org
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Commit a06b40cdf5 updated stat.h to use
__USE_XOPEN2K8 instead of __USE_MISC to add the st_atim, st_mtim and
st_ctim members to struct stat. However, for microblaze, there are two
definitions of struct stat, depending on the __USE_FILE_OFFSET64 macro.
The second one was not updated.
Change __USE_MISC to __USE_XOPEN2K8 in the __USE_FILE_OFFSET64 version
of struct stat for microblaze.
The hppa port starts libc at GLIBC_2.2, but has earlier symbol
versions in other shared objects. This means that the compat
symbol for readdir64 is not actually present in libc even though
have-GLIBC_2.1.3 is defined as yes at the make level.
Fixes commit 15e50e6c96 ("Linux:
dirent/tst-readdir64-compat can be a regular test") by mostly
reverting it.
The implementation is based on scalar Chacha20 with per-thread cache.
It uses getrandom or /dev/urandom as fallback to get the initial entropy,
and reseeds the internal state on every 16MB of consumed buffer.
To improve performance and lower memory consumption the per-thread cache
is allocated lazily on first arc4random functions call, and if the
memory allocation fails getentropy or /dev/urandom is used as fallback.
The cache is also cleared on thread exit iff it was initialized (so if
arc4random is not called it is not touched).
Although it is lock-free, arc4random is still not async-signal-safe
(the per thread state is not updated atomically).
The ChaCha20 implementation is based on RFC8439 [1], omitting the final
XOR of the keystream with the plaintext because the plaintext is a
stream of zeros. This strategy is similar to what OpenBSD arc4random
does.
The arc4random_uniform is based on previous work by Florian Weimer,
where the algorithm is based on Jérémie Lumbroso paper Optimal Discrete
Uniform Generation from Coin Flips, and Applications (2013) [2], who
credits Donald E. Knuth and Andrew C. Yao, The complexity of nonuniform
random number generation (1976), for solving the general case.
The main advantage of this method is the that the unit of randomness is not
the uniform random variable (uint32_t), but a random bit. It optimizes the
internal buffer sampling by initially consuming a 32-bit random variable
and then sampling byte per byte. Depending of the upper bound requested,
it might lead to better CPU utilization.
Checked on x86_64-linux-gnu, aarch64-linux, and powerpc64le-linux-gnu.
Co-authored-by: Florian Weimer <fweimer@redhat.com>
Reviewed-by: Yann Droneaud <ydroneaud@opteya.com>
[1] https://datatracker.ietf.org/doc/html/rfc8439
[2] https://arxiv.org/pdf/1304.1916.pdf
Before this the test fails if run in a chroot by a non-root user:
warning: could not become root outside namespace (Operation not permitted)
../sysdeps/unix/sysv/linux/tst-mount.c:36: numeric comparison failure
left: 1 (0x1); from: errno
right: 19 (0x13); from: ENODEV
error: ../sysdeps/unix/sysv/linux/tst-mount.c:39: not true: fd != -1
error: ../sysdeps/unix/sysv/linux/tst-mount.c:46: not true: r != -1
error: ../sysdeps/unix/sysv/linux/tst-mount.c:48: not true: r != -1
../sysdeps/unix/sysv/linux/tst-mount.c:52: numeric comparison failure
left: 1 (0x1); from: errno
right: 9 (0x9); from: EBADF
error: ../sysdeps/unix/sysv/linux/tst-mount.c:55: not true: mfd != -1
../sysdeps/unix/sysv/linux/tst-mount.c:58: numeric comparison failure
left: 1 (0x1); from: errno
right: 2 (0x2); from: ENOENT
error: ../sysdeps/unix/sysv/linux/tst-mount.c:61: not true: r != -1
../sysdeps/unix/sysv/linux/tst-mount.c:65: numeric comparison failure
left: 1 (0x1); from: errno
right: 2 (0x2); from: ENOENT
error: ../sysdeps/unix/sysv/linux/tst-mount.c:68: not true: pfd != -1
error: ../sysdeps/unix/sysv/linux/tst-mount.c:75: not true: fd_tree != -1
../sysdeps/unix/sysv/linux/tst-mount.c:88: numeric comparison failure
left: 1 (0x1); from: errno
right: 38 (0x26); from: ENOSYS
error: 12 test failures
Checking that the test can enter a new mount namespace is more correct
than just checking the return value of support_become_root() as the test
code changes the mount namespace it runs in so running it as root on a
system that does not support mount namespaces should still skip.
Also change the test to remove the unnecessary fork.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Starting with commit e070501d12
"Replace __libc_multiple_threads with __libc_single_threaded"
the testcases nptl/tst-cancel-self and
nptl/tst-cancel-self-cancelstate are failing.
This is fixed by only defining SINGLE_THREAD_BY_GLOBAL on s390x,
but not on s390.
Starting with commit 09c76a7409
"Linux: Consolidate {RTLD_}SINGLE_THREAD_P definition",
SINGLE_THREAD_BY_GLOBAL was defined in
sysdeps/unix/sysv/linux/s390/s390-64/sysdep.h.
Lateron the commit 9a973da617
"s390: Consolidate Linux syscall definition" consolidates the sysdep.h files
from s390-32/s390-64 subdirectories. Unfortunately the macro is now always
defined instead of only on s390-64.
As information:
TLS_MULTIPLE_THREADS_IN_TCB is also only defined for s390.
See: sysdeps/s390/nptl/tls.h
This change provides implementations for the mbrtoc8 and c8rtomb
functions adopted for C++20 via WG21 P0482R6 and for C2X via WG14
N2653. It also provides the char8_t typedef from WG14 N2653.
The mbrtoc8 and c8rtomb functions are declared in uchar.h in C2X
mode or when the _GNU_SOURCE macro or C++20 __cpp_char8_t feature
test macro is defined.
The char8_t typedef is declared in uchar.h in C2X mode or when the
_GNU_SOURCE macro is defined and the C++20 __cpp_char8_t feature
test macro is not defined (if __cpp_char8_t is defined, then char8_t
is a builtin type).
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
And also fixes the SINGLE_THREAD_P macro for SINGLE_THREAD_BY_GLOBAL,
since header inclusion single-thread.h is in the wrong order, the define
needs to come before including sysdeps/unix/sysdep.h. The macro
is now moved to a per-arch single-threade.h header.
The SINGLE_THREAD_P is used on some more places.
Checked on aarch64-linux-gnu and x86_64-linux-gnu.
It was added on Linux 5.12 (2a1867219c7b27f928e2545782b86daaf9ad50bd)
to allow change the properties of a mount or a mount tree using file
descriptors which the new mount api is based on.
Checked on x86_64-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
The new mount API was added on Linux 5.2 with six new syscalls:
fsopen, fsconfig, fsmount, move_mount, fspick, and open_tree.
The new test verifies minimal functionality along with error paths
for specific arguments and their corner cases.
Checked on x86_64-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
It was added on Linux 5.2 (a07b20004793d8926f78d63eb5980559f7813404)
to return a O_PATH-opened file descriptor to an existing mountpoint.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
It was added on Linux 5.2 (cf3cba4a429be43e5527a3f78859b1bfd9ebc5fb)
that can be used to pick an existing mountpoint into an filesystem
context which can thereafter be used to reconfigure a superblock
with fsconfig syscall.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
It was added on Linux 5.2 (ecdab150fddb42fe6a739335257949220033b782)
as a way to a configure filesystem creation context and trigger
actions upon it, to be used in conjunction with fsopen, fspick and
fsmount.
The fsconfig_command commands are currently only defined as an enum,
so they can't be checked on tst-mount-consts.py with current test
support.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
The main drive is to optimize the internal usage and required size
when sigset_t is embedded in other data structures. On Linux, the
current supported signal set requires up to 8 bytes (16 on mips),
was lower than the user defined sigset_t (128 bytes).
A new internal type internal_sigset_t is added, along with the
functions to operate on it similar to the ones for sigset_t. The
internal-signals.h is also refactored to remove unused functions
Besides small stack usage on some functions (posix_spawn, abort)
it lower the struct pthread by about 120 bytes (112 on mips).
Checked on x86_64-linux-gnu.
Reviewed-by: Arjun Shankar <arjun@redhat.com>
The new asymmetric mode is available when HWCAP2_MTE3 is set (support is
available), bit2 is set in the tunable (user request per application),
and the system is configured such that the asymmetric mode is preferred over
sync or async (per-cpu system-wide setting).
Reviewed-by: Szabolcs Nagy <szabolcs.nagy@arm.com>
On success, mq_receive() and mq_timedreceive() return the number of
bytes in the received message, so it requires to check if the value
is larger than 0.
Checked on i686-linux-gnu.
These files simply include the sysdeps/posix implementations which would
be used even in the absence of the files. They have been unnecessary
since 7b17aeda0c when nice and signal were removed from the
syscalls.list file.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
This maintains compatibility between <sys/mman.h> and <linux/uio.h>.
Before that, the addition of process_madvise made those two header
files incompatible. This has been observed resulting in a build
failure in LLDB's Process/Linux/NativeRegisterContextLinux_s390x.cpp
source file.
Fixes commit d19ee3473d
("linux: Add process_madvise").
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
It was added on Linux 5.2 (2db154b3ea8e14b04fee23e3fdfd5e9d17fbc6ae)
as way t move a mount from one place to another and, in the next
commit, allow to attach an unattached mount tree.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
It was added on 5.2 (93766fbd2696c2c4453dd8e1070977e9cd4e6b6d) to
provide a way by which a filesystem opened with fsopen and configured
by a series of fsconfig calls can have a detached mount object
created for it.
Tested-by: Carlos O'Donell <carlos@redhat.com>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
It was added on Linux 5.2 (24dcb3d90a1f67fe08c68a004af37df059d74005)
to start the process of preparing to create a superblock that will
then be mountable, using an fd as a context handle.
Tested-by: Carlos O'Donell <carlos@redhat.com>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Added in Linux 5.15 (884a7e5964e06ed93c7771c0d7cf19c09a8946f1), the new
syscalls allows a caller to free the memory of a dying target process.
Checked on x86_64-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
It was added on Linux 5.10 (ecb8ac8b1f146915aa6b96449b66dd48984caacc)
with the same functionality as madvise but using a pidfd of the target
process.
Checked on x86_64-linux-gnu and i686-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
This definition is only used as a fallback with old kernel headers.
The change follows kernel commit bfdf4e6208051ed7165b2e92035b4bf11
("rseq: Remove broken uapi field layout on 32-bit little endian").
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
LoongArch is going to be the first architecture supported by Linux that
has neither fstat* nor newfstatat [1], instead exclusively relying on
statx. So in fstatat64's implementation, we need to also enable statx
usage if neither fstatat64 nor newfstatat is present, to prepare for
this new case of kernel ABI.
[1]: https://lore.kernel.org/all/20220518092619.1269111-1-chenhuacai@loongson.cn/
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Linux 5.18 adds a constant MADV_DONTNEED_LOCKED (defined in multiple
header files, but with the same value on all architectures). Add this
constant to bits/mman-linux.h.
Tested for x86_64.
Linux 5.18 defines a new AArch64 HWCAP value HWCAP2_MTE3; add it to
glibc's sysdeps/unix/sysv/linux/aarch64/bits/hwcap.h.
Tested with build-many-glibcs.py for aarch64-linux-gnu.
This patch updates the kernel version in the tests tst-mman-consts.py
and tst-pidfd-consts.py to 5.18. (There are no new constants covered
by these tests in 5.18, or in 5.17 in the case of tst-pidfd-consts.py
that previously used version 5.16, that need any other header
changes.)
Tested with build-many-glibcs.py.
Linux 5.18 has no new syscalls. Update the version number in
syscall-names.list to reflect that it is still current for 5.18.
Tested with build-many-glibcs.py.
To check for the pidfd functions pidfd_open, pidfd_getfd, pid_send_signal,
and waitid with P_PIDFD.
Checked on x86_64-linux-gnu and i686-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
It was added on Linux 5.4 (3695eae5fee0605f316fbaad0b9e3de791d7dfaf)
to extend waitid to wait on pidfd.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
This was added on Linux 5.1(3eb39f47934f9d5a3027fe00d906a45fe3a15fad)
as a way to avoid the race condition of using kill (where PID might be
reused by the kernel between between obtaining the pid and sending the
signal).
If the siginfo_t argument is NULL then pidfd_send_signal is equivalent
to kill. If it is not NULL pidfd_send_signal is equivalent to
rt_sigqueueinfo.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
This was added on Linux 5.6 (8649c322f75c96e7ced2fec201e123b2b073bf09)
as a way to retrieve a file descriptors for another process though
pidfd (created either with CLONE_PIDFD or pidfd_getfd). The
functionality is similar to recvmmsg SCM_RIGHTS.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
This was added on Linux 5.3 (32fcb426ec001cb6d5a4a195091a8486ea77e2df)
as a way to retrieve a pid file descriptors for process that has not
been created CLONE_PIDFD (by usual fork/clone).
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
This is for bug 23293 and it relies on the glibc test system running
tests via explicit ld.so invokation by default.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
_dl_skip_args is always 0, so the target specific code that modifies
argv after relro protection is applied is no longer used.
After the patch relro protection is applied to _dl_argv consistently
on all targets.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
The Linux version used by i686 and m68k provide three overrrides for
generic code:
1. DISTINGUISH_LIB_VERSIONS to print additional information when
libc5 is used by a dependency.
2. EXTRA_LD_ENVVARS to that enabled LD_LIBRARY_VERSION environment
variable.
3. EXTRA_UNSECURE_ENVVARS to add two environment variables related
to aout support.
None are really requires, it has some decades since libc5 or aout
suppported was removed and Linux even remove support for aout files.
The LD_LIBRARY_VERSION is also dead code, dl_correct_cache_id is not
used anywhere.
Checked on x86_64-linux-gnu and i686-linux-gnu.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
The kernel version check is used to avoid glibc to run on older
kernels where some syscall are not available and fallback code are
not enabled to handle graciously fail. However, it does not prevent
if the kernel does not correctly advertise its version through
vDSO note, uname or procfs.
Also kernel version checks are sometime not desirable by users,
where they want to deploy on different system with different kernel
version knowing the minimum set of syscall is always presented on
such systems.
The kernel version check has been removed along with the
LD_ASSUME_KERNEL environment variable. The minimum kernel used to
built glibc is still provided through NT_GNU_ABI_TAG ELF note and
also printed when libc.so is issued.
Checked on x86_64-linux-gnu.
Currently on Linux __get_nprocs_conf first tries to enumerate the
cpus present in the system by iterating on /sys/devices/system/cpuX
directories. This only enumerates the CPUs that are present in
system (but possibly offline), not taking in account possible CPU
that might added in the system through hotplugging.
Linux provides the maximum number of configured cpus on the
/sys/devices/system/cpu file. Although it might present a larger
value of possible active CPUs on some system (where kernel either
get the information from firmaware or is configured at boot time),
the information is what kernel presents to userland.
This also change the returned value of _SC_NPROCESSORS_CONF, which
aligns as the maximum configure cpu in the system.
Checked on x86_64-linux-gnu.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
This implements mmap fallback for a brk failure during TLS
allocation.
scripts/tls-elf-edit.py is updated to support the new patching method.
The script no longer requires that in the input object is of ET_DYN
type.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
The siglist.c is built with -fno-toplevel-reorder to avoid compiler
to reorder the compat assembly directives due an assembler
issue [1] (fixed on 2.39).
This patch removes the compiler flags by split the compat symbol
generation in two phases. First the __sys_siglist and __sys_sigabbrev
without any compat symbol directive is preprocessed to generate an
assembly source code. This generate assembly is then used as input
on a platform agnostic siglist.S which then creates the compat
definitions. This prevents compiler to move any compat directive
prior the _sys_errlist definition itself.
Checked on a make check run-built-tests=no on all affected ABIs.
Reviewed-by: Fangrui Song <maskray@google.com>
The errlist.c is built with -fno-toplevel-reorder to avoid compiler to
reorder the compat assembly directives due an assembler issue [1]
(fixed on 2.39).
This patch removes the compiler flags by split the compat symbol
generation in two phases. First the _sys_errlist_internal internal
without any compat symbol directive is preprocessed to generate an
assembly source code. This generate assembly is then used as input
on a platform agnostic errlist-data.S which then creates the compat
definitions. This prevents compiler to move any compat directive
prior the _sys_errlist_internal definition itself.
Checked on a make check run-built-tests=no on all affected ABIs.
[1] https://sourceware.org/bugzilla/show_bug.cgi?id=29012
And keep the previous definition if it exists. This allows
disabling IA64_USE_NEW_STUB while keeping USE_DL_SYSINFO defined.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Unlike MMAP_CALL, this avoids a TCB dependency for an errno update
on failure.
<mmap_internal.h> cannot be included as is on several architectures
due to the definition of page_unit, so introduce a separate header
file for the definition of MMAP_CALL and MMAP_CALL_INTERNAL,
<mmap_call.h>.
Reviewed-by: Stefan Liebler <stli@linux.ibm.com>
The AT_SYMLINK_NOFOLLOW emulation ues the default 32 bit stat internal
calls, which fails with EOVERFLOW if the file constains timestamps
beyond 2038.
Checked on i686-linux-gnu.
Copied from gnulib/lib/glob.c in order to fix rhbz 1982608
Also fixes swbz 25659
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
This is necessary to place the libio vtables into the RELRO segment.
New tests elf/tst-relro-ldso and elf/tst-relro-libc are added to
verify that this is what actually happens.
The new tests fail on ia64 due to lack of (default) RELRO support
inbutils, so they are XFAILed there.
After 73fc4e28b9,
__libc_enable_secure_decided is always 0 and a statically linked
executable may overwrite __libc_enable_secure without considering
AT_SECURE.
The __libc_enable_secure has been correctly initialized in _dl_aux_init,
so just remove __libc_enable_secure_decided and __libc_init_secure.
This allows us to remove some startup_get*id functions from
22b79ed7f4.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
On 32-bit machines this has no affect. On 64-bit machines
{u}int_fast{16|32} are set as {u}int64_t which is often not
ideal. Particularly x86_64 this change both saves code size and
may save instruction cost.
Full xcheck passes on x86_64.
start_addresses in sysdeps/powerpc/powerpc64/start.S is historical
baggage that should disappear. Until someone does that, relocating
stinfo->main by hand is one solution to the fact that the field may be
unrelocated at the time it is accessed. This is similar to what is
done for dynamic tags via the D_PTR macro. stinfo->init and
stinfo->fini are zero in both powerpc64/start.S and powerpc32/start.S,
so make it a little more obvious they are unused by passing NULLs to
LIBC_START_MAIN. The makefile change is needed to pick up
elf/dl-static-tls.h from dl-machine.h.
Reviewed-by: Tulio Magno Quites Machado Filho <tuliom@linux.ibm.com>
Compilers may decide to put the rfv variable in .data rather than on
the stack. It's slightly better to put it in .data.rel.ro.local
instead. Regardles of that, making it const may enable further
optimisations. Found when examining relative relocations (GOT ones
in particular) as part of enabling static-pie for PowerPC64.
The __closefrom_fallback tries to get a available file descriptor
if the initial open ("/proc/self/fd/", ...) fails. It assumes the
failure would be only if procfs is not mount (ENOENT), however if
the the proc file is not accessible (due some other kernel filtering
such apparmor) it will iterate over a potentially large file set
issuing close calls.
It should only try the close fallback if open returns EMFILE,
ENFILE, or ENOMEM.
Checked on x86_64-linux-gnu.
This patch updates the kernel version in the test tst-mman-consts.py
to 5.17. (There are no new MAP_* constants covered by this test in
5.17 that need any other header changes.)
Tested with build-many-glibcs.py.
Linux 5.17 has one new syscall, set_mempolicy_home_node. Update
syscall-names.list and regenerate the arch-syscall.h headers with
build-many-glibcs.py update-syscalls.
Tested with build-many-glibcs.py.
When swapcontext.c is compiled without -g, the following error occurs:
Error: CFI instruction used without previous .cfi_startproc
Fix by converting swapcontext routine to assembler.
Remove libc-do-syscall from sysdep-dl-routines added by:
commit 3b33d6ed60
Author: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Date: Sun Jan 8 11:38:23 2017 -0200
Rework -fno-omit-frame-pointer support on i386
and use auto-generated io/rtld-libc-do-syscall.os instead. This fixes
BZ #28936.
And optimize it slightly.
This is commit 8c8510ab27 revised.
In _dl_aux_init in elf/dl-support.c, use an explicit loop
and -fno-tree-loop-distribute-patterns to avoid memset.
Reviewed-by: Szabolcs Nagy <szabolcs.nagy@arm.com>
1. Also generate .d dependency files for $(tests-container) and
$(tests-printers).
2. elf: Add tst-auditmod17.os to extra-test-objs.
3. iconv: Add tst-gconv-init-failure-mod.os to extra-test-objs.
4. malloc: Rename extra-tests-objs to extra-test-objs.
5. linux: Add tst-sysconf-iov_max-uapi.o to extra-test-objs.
6. x86_64: Add tst-x86_64mod-1.o, tst-platformmod-2.o, test-libmvec.o,
test-libmvec-avx.o, test-libmvec-avx2.o and test-libmvec-avx512f.o to
extra-test-objs.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
The current getcontext return trampoline is overly complex and it
unnecessarily clobbers several registers. By saving the context
pointer (r26) in the context, __getcontext_ret can restore any
registers not restored by setcontext. This allows getcontext to
save and restore the entire register context present when getcontext
is entered. We use the unused oR0 context slot for the return
from __getcontext_ret.
While this is not directly useful in C, it can be exploited in
assembly code. Registers r20, r23, r24 and r25 are not clobbered
in the call path to getcontext. This allows a small simplification
of swapcontext.
It also allows saving and restoring the 6-bit SAR register in the
LSB of the oSAR context slot. The getcontext flag value can be
stored in the MSB of the oSAR slot.
This change fixes the failure of stdlib/tst-setcontext2 and
stdlib/tst-setcontext7 on hppa. The implementation of swapcontext
in C is broken. C saves the return pointer (rp) and any non
call-clobbered registers (in this case r3, r4 and r5) on the
stack. However, the setcontext call in swapcontext pops the
stack and subsequent calls clobber the saved registers. When
the context in oucp is restored, both tests fault.
Here we rewrite swapcontext in assembly code to avoid using
the stack for register values that need to be used after
restoration. The getcontext and setcontext routines are
revised to save and restore register ret1 for normal returns.
We copy the oucp pointer to ret1. This allows access to
the old context after calling getcontext and setcontext.
On Microblaze only __NR_newselect is implemented, even though kernel
advertise __NR_select on asm/unistd.h. Since microblaze is the
only architecture that undef __ASSUME_PSELECT, the generic code
change is simpler than chaging the architecture syscall number.
Acked-by: Mark Hatle <mark.hatle@xilinx.com>
This patch updates the kernel version in the test tst-mman-consts.py
to 5.16. (There are no new MAP_* constants covered by this test in
5.16 that need any other header changes.)
Tested with build-many-glibcs.py.
The kernel header might not define the SO_TIMESTAMP{NS}_OLD or
SO_TIMESTAMP{NS}_NEW if it older than v5.1.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Reviewed-by: Tulio Magno Quites Machado Filho <tuliom@linux.ibm.com>
Otherwise, <dl-auxv.h> on POWER ends up being included twice,
once in dl-sysdep.c, once in dl-support.c. That leads to a linker
failure due to multiple definitions of _dl_cache_line_size.
Fixes commit d96d2995c1
("Revert "Linux: Consolidate auxiliary vector parsing").
This reverts commit 8c8510ab27. The
revert is not perfect because the commit included a bug fix for
_dl_sysdep_start with an empty argv, introduced in commit
2d47fa6862 ("Linux: Remove
DL_FIND_ARG_COMPONENTS"), and this bug fix is kept.
The revert is necessary because the reverted commit introduced an
early memset call on aarch64, which leads to crash due to lack of TCB
initialization.
And optimize it slightly.
The large switch statement in _dl_sysdep_start can be replaced with
a large array. This reduces source code and binary size. On
i686-linux-gnu:
Before:
text data bss dec hex filename
7791 12 0 7803 1e7b elf/dl-sysdep.os
After:
text data bss dec hex filename
7135 12 0 7147 1beb elf/dl-sysdep.os
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Volker Weißmann
Kir Kolyshkin
Adhemerval Zanella
caiyinyu
Joseph Myers
Sergei Trofimovich
Aurelien Jarno
Xi Ruoyao
Florian Weimer
Sam James
dengjianbo
наб
Mahesh Bodapati
Stefan Liebler
Siddhesh Poyarekar
Frédéric Bérat
John David Anglin
Joe Ramsay
Joe Simmons-Talbott
Sergey Bugaev
Alejandro Colomar
Paul Pluzhnikov
DJ Delorie
Carlos O'Donell
Samuel Thibault
H.J. Lu
Andreas Schwab
Pavel Kozlov
Kacper Piwiński
Qihao Chencao
quxm
Rajalakshmi Srinivasaraghavan
Xing Li
YunQiang Su
Zong Li
Szabolcs Nagy
Javier Pello
Wilco Dijkstra
Łukasz Stelmach
Lucas A. M. Magalhaes
Arjun Shankar
Mark Wielaard
Jason A. Donenfeld
Arnout Vandecappelle (Essensium/Mind)
Michael Hudson-Doyle
Tom Honermann
Tejas Belagod
WANG Xuerui
Xiaoming Ni
Fangrui Song
=Joshua Kinard
Noah Goldstein
Alan Modra
Steve Grubb
Andreas Schwab