Since have-mtls-descriptor is only used for glibc testing, rename it to
have-test-mtls-descriptor. Also enable tst-gnu2-tls2-amx only if
$(have-test-mtls-descriptor) == gnu2.
Tested with GCC 14 and Clang 19/18/17 on x86-64.
Signed-off-by: H.J. Lu <hjl.tools@gmail.com>
Reviewed-by: Sam James <sam@gentoo.org>
Move the x86-64 loader first, before the i386 and x32 loaders. In
most cases, it's the loader the script needs. This avoids an error
message if the i386 loader does not work.
The effect of this change to the generated ldd script looks like this:
-RTLDLIST="/lib/ld-linux.so.2 /lib64/ld-linux-x86-64.so.2 /libx32/ld-linux-x32.so.2"
+RTLDLIST="/lib64/ld-linux-x86-64.so.2 /lib/ld-linux.so.2 /libx32/ld-linux-x32.so.2"
Reviewed-by: Sam James <sam@gentoo.org>
Add __attribute_optimization_barrier__ to disable inlining and cloning on a
function. For Clang, expand it to
__attribute__ ((optnone))
Otherwise, expand it to
__attribute__ ((noinline, clone))
Co-Authored-By: H.J. Lu <hjl.tools@gmail.com>
Reviewed-by: Sam James <sam@gentoo.org>
C23 adds various <math.h> function families originally defined in TS
18661-4. Add the atan2pi functions (atan2(y,x)/pi).
Tested for x86_64 and x86, and with build-many-glibcs.py.
C23 adds various <math.h> function families originally defined in TS
18661-4. Add the atanpi functions (atan(x)/pi).
Tested for x86_64 and x86, and with build-many-glibcs.py.
C23 adds various <math.h> function families originally defined in TS
18661-4. Add the asinpi functions (asin(x)/pi).
Tested for x86_64 and x86, and with build-many-glibcs.py.
C23 adds various <math.h> function families originally defined in TS
18661-4. Add the acospi functions (acos(x)/pi).
Tested for x86_64 and x86, and with build-many-glibcs.py.
C23 adds various <math.h> function families originally defined in TS
18661-4. Add the tanpi functions (tan(pi*x)).
Tested for x86_64 and x86, and with build-many-glibcs.py.
C23 adds various <math.h> function families originally defined in TS
18661-4. Add the sinpi functions (sin(pi*x)).
Tested for x86_64 and x86, and with build-many-glibcs.py.
C23 adds various <math.h> function families originally defined in TS
18661-4. Add the cospi functions (cos(pi*x)).
Tested for x86_64 and x86, and with build-many-glibcs.py.
Linux 6.11 has getrandom() in vDSO. It operates on a thread-local opaque
state allocated with mmap using flags specified by the vDSO.
Multiple states are allocated at once, as many as fit into a page, and
these are held in an array of available states to be doled out to each
thread upon first use, and recycled when a thread terminates. As these
states run low, more are allocated.
To make this procedure async-signal-safe, a simple guard is used in the
LSB of the opaque state address, falling back to the syscall if there's
reentrancy contention.
Also, _Fork() is handled by blocking signals on opaque state allocation
(so _Fork() always sees a consistent state even if it interrupts a
getrandom() call) and by iterating over the thread stack cache on
reclaim_stack. Each opaque state will be in the free states list
(grnd_alloc.states) or allocated to a running thread.
The cancellation is handled by always using GRND_NONBLOCK flags while
calling the vDSO, and falling back to the cancellable syscall if the
kernel returns EAGAIN (would block). Since getrandom is not defined by
POSIX and cancellation is supported as an extension, the cancellation is
handled as 'may occur' instead of 'shall occur' [1], meaning that if
vDSO does not block (the expected behavior) getrandom will not act as a
cancellation entrypoint. It avoids a pthread_testcancel call on the fast
path (different than 'shall occur' functions, like sem_wait()).
It is currently enabled for x86_64, which is available in Linux 6.11,
and aarch64, powerpc32, powerpc64, loongarch64, and s390x, which are
available in Linux 6.12.
Link: https://pubs.opengroup.org/onlinepubs/9799919799/nframe.html [1]
Co-developed-by: Jason A. Donenfeld <Jason@zx2c4.com>
Tested-by: Jason A. Donenfeld <Jason@zx2c4.com> # x86_64
Tested-by: Adhemerval Zanella <adhemerval.zanella@linaro.org> # x86_64, aarch64
Tested-by: Xi Ruoyao <xry111@xry111.site> # x86_64, aarch64, loongarch64
Tested-by: Stefan Liebler <stli@linux.ibm.com> # s390x
Linux 6.11 changes for syscall are:
* fstat/newfstatat for loongarch (it should be safe to add since
255dc1e4ed that undefine them).
* clone3 for nios2, which only adds the entry point but defined
__ARCH_BROKEN_SYS_CLONE3 (the syscall will always return ENOSYS).
* uretprobe for x86_64 and x32.
Update syscall-names.list and regenerate the arch-syscall.h headers
with build-many-glibcs.py update-syscalls.
Tested with build-many-glibcs.py.
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
And struct sched_attr.
In sysdeps/unix/sysv/linux/bits/sched.h, the hack that defines
sched_param around the inclusion of <linux/sched/types.h> is quite
ugly, but the definition of struct sched_param has already been
dropped by the kernel, so there is nothing else we can do and maintain
compatibility of <sched.h> with a wide range of kernel header
versions. (An alternative would involve introducing a separate header
for this functionality, but this seems unnecessary.)
The existing sched_* functions that change scheduler parameters
are already incompatible with PTHREAD_PRIO_PROTECT mutexes, so
there is no harm in adding more functionality in this area.
The documentation mostly defers to the Linux manual pages.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
The current racy approach is to enable asynchronous cancellation
before making the syscall and restore the previous cancellation
type once the syscall returns, and check if cancellation has happen
during the cancellation entrypoint.
As described in BZ#12683, this approach shows 2 problems:
1. Cancellation can act after the syscall has returned from the
kernel, but before userspace saves the return value. It might
result in a resource leak if the syscall allocated a resource or a
side effect (partial read/write), and there is no way to program
handle it with cancellation handlers.
2. If a signal is handled while the thread is blocked at a cancellable
syscall, the entire signal handler runs with asynchronous
cancellation enabled. This can lead to issues if the signal
handler call functions which are async-signal-safe but not
async-cancel-safe.
For the cancellation to work correctly, there are 5 points at which the
cancellation signal could arrive:
[ ... )[ ... )[ syscall ]( ...
1 2 3 4 5
1. Before initial testcancel, e.g. [*... testcancel)
2. Between testcancel and syscall start, e.g. [testcancel...syscall start)
3. While syscall is blocked and no side effects have yet taken
place, e.g. [ syscall ]
4. Same as 3 but with side-effects having occurred (e.g. a partial
read or write).
5. After syscall end e.g. (syscall end...*]
And libc wants to act on cancellation in cases 1, 2, and 3 but not
in cases 4 or 5. For the 4 and 5 cases, the cancellation will eventually
happen in the next cancellable entrypoint without any further external
event.
The proposed solution for each case is:
1. Do a conditional branch based on whether the thread has received
a cancellation request;
2. It can be caught by the signal handler determining that the saved
program counter (from the ucontext_t) is in some address range
beginning just before the "testcancel" and ending with the
syscall instruction.
3. SIGCANCEL can be caught by the signal handler and determine that
the saved program counter (from the ucontext_t) is in the address
range beginning just before "testcancel" and ending with the first
uninterruptable (via a signal) syscall instruction that enters the
kernel.
4. In this case, except for certain syscalls that ALWAYS fail with
EINTR even for non-interrupting signals, the kernel will reset
the program counter to point at the syscall instruction during
signal handling, so that the syscall is restarted when the signal
handler returns. So, from the signal handler's standpoint, this
looks the same as case 2, and thus it's taken care of.
5. For syscalls with side-effects, the kernel cannot restart the
syscall; when it's interrupted by a signal, the kernel must cause
the syscall to return with whatever partial result is obtained
(e.g. partial read or write).
6. The saved program counter points just after the syscall
instruction, so the signal handler won't act on cancellation.
This is similar to 4. since the program counter is past the syscall
instruction.
So The proposed fixes are:
1. Remove the enable_asynccancel/disable_asynccancel function usage in
cancellable syscall definition and instead make them call a common
symbol that will check if cancellation is enabled (__syscall_cancel
at nptl/cancellation.c), call the arch-specific cancellable
entry-point (__syscall_cancel_arch), and cancel the thread when
required.
2. Provide an arch-specific generic system call wrapper function
that contains global markers. These markers will be used in
SIGCANCEL signal handler to check if the interruption has been
called in a valid syscall and if the syscalls has side-effects.
A reference implementation sysdeps/unix/sysv/linux/syscall_cancel.c
is provided. However, the markers may not be set on correct
expected places depending on how INTERNAL_SYSCALL_NCS is
implemented by the architecture. It is expected that all
architectures add an arch-specific implementation.
3. Rewrite SIGCANCEL asynchronous handler to check for both canceling
type and if current IP from signal handler falls between the global
markers and act accordingly.
4. Adjust libc code to replace LIBC_CANCEL_ASYNC/LIBC_CANCEL_RESET to
use the appropriate cancelable syscalls.
5. Adjust 'lowlevellock-futex.h' arch-specific implementations to
provide cancelable futex calls.
Some architectures require specific support on syscall handling:
* On i386 the syscall cancel bridge needs to use the old int80
instruction because the optimized vDSO symbol the resulting PC value
for an interrupted syscall points to an address outside the expected
markers in __syscall_cancel_arch. It has been discussed in LKML [1]
on how kernel could help userland to accomplish it, but afaik
discussion has stalled.
Also, sysenter should not be used directly by libc since its calling
convention is set by the kernel depending of the underlying x86 chip
(check kernel commit 30bfa7b3488bfb1bb75c9f50a5fcac1832970c60).
* mips o32 is the only kABI that requires 7 argument syscall, and to
avoid add a requirement on all architectures to support it, mips
support is added with extra internal defines.
Checked on aarch64-linux-gnu, arm-linux-gnueabihf, powerpc-linux-gnu,
powerpc64-linux-gnu, powerpc64le-linux-gnu, i686-linux-gnu, and
x86_64-linux-gnu.
[1] https://lkml.org/lkml/2016/3/8/1105
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Linux 6.10 changes for syscall are:
* mseal for all architectures.
* map_shadow_stack for x32.
* Replace sync_file_range with sync_file_range2 for csky (which
fixes a broken sync_file_range usage).
Update syscall-names.list and regenerate the arch-syscall.h headers
with build-many-glibcs.py update-syscalls.
Tested with build-many-glibcs.py.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
Use RXX_LP in RTLD_START_ENABLE_X86_FEATURES. Support shadow stack during
startup for Linux 6.10:
commit 2883f01ec37dd8668e7222dfdb5980c86fdfe277
Author: H.J. Lu <hjl.tools@gmail.com>
Date: Fri Mar 15 07:04:33 2024 -0700
x86/shstk: Enable shadow stacks for x32
1. Add shadow stack support to x32 signal.
2. Use the 64-bit map_shadow_stack syscall for x32.
3. Set up shadow stack for x32.
Add the map_shadow_stack system call to <fixup-asm-unistd.h> and regenerate
arch-syscall.h. Tested on Intel Tiger Lake with CET enabled x32. There
are no regressions with CET enabled x86-64. There are no changes in CET
enabled x86-64 _dl_start_user.
Signed-off-by: H.J. Lu <hjl.tools@gmail.com>
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
C23 adds various <math.h> function families originally defined in TS
18661-4. Add the exp2m1 and exp10m1 functions (exp2(x)-1 and
exp10(x)-1, like expm1).
As with other such functions, these use type-generic templates that
could be replaced with faster and more accurate type-specific
implementations in future. Test inputs are copied from those for
expm1, plus some additions close to the overflow threshold (copied
from exp2 and exp10) and also some near the underflow threshold.
exp2m1 has the unusual property of having an input (M_MAX_EXP) where
whether the function overflows (under IEEE semantics) depends on the
rounding mode. Although these could reasonably be XFAILed in the
testsuite (as we do in some cases for arguments very close to a
function's overflow threshold when an error of a few ulps in the
implementation can result in the implementation not agreeing with an
ideal one on whether overflow takes place - the testsuite isn't smart
enough to handle this automatically), since these functions aren't
required to be correctly rounding, I made the implementation check for
and handle this case specially.
The Makefile ordering expected by lint-makefiles for the new functions
is a bit peculiar, but I implemented it in this patch so that the test
passes; I don't know why log2 also needed moving in one Makefile
variable setting when it didn't in my previous patches, but the
failure showed a different place was expected for that function as
well.
The powerpc64le IFUNC setup seems not to be as self-contained as one
might hope; it shouldn't be necessary to add IFUNCs for new functions
such as these simply to get them building, but without setting up
IFUNCs for the new functions, there were undefined references to
__GI___expm1f128 (that IFUNC machinery results in no such function
being defined, but doesn't stop include/math.h from doing the
redirection resulting in the exp2m1f128 and exp10m1f128
implementations expecting to call it).
Tested for x86_64 and x86, and with build-many-glibcs.py.
C23 adds various <math.h> function families originally defined in TS
18661-4. Add the log10p1 functions (log10(1+x): like log1p, but for
base-10 logarithms).
This is directly analogous to the log2p1 implementation (except that
whereas log2p1 has a smaller underflow range than log1p, log10p1 has a
larger underflow range). The test inputs are copied from those for
log1p and log2p1, plus a few more inputs in that wider underflow
range.
Tested for x86_64 and x86, and with build-many-glibcs.py.
C23 adds various <math.h> function families originally defined in TS
18661-4. Add the logp1 functions (aliases for log1p functions - the
name is intended to be more consistent with the new log2p1 and
log10p1, where clearly it would have been very confusing to name those
functions log21p and log101p). As aliases rather than new functions,
the content of this patch is somewhat different from those actually
adding new functions.
Tests are shared with log1p, so this patch *does* mechanically update
all affected libm-test-ulps files to expect the same errors for both
functions.
The vector versions of log1p on aarch64 and x86_64 are *not* updated
to have logp1 aliases (and thus there are no corresponding header,
tests, abilist or ulps changes for vector functions either). It would
be reasonable for such vector aliases and corresponding changes to
other files to be made separately. For now, the log1p tests instead
avoid testing logp1 in the vector case (a Makefile change is needed to
avoid problems with grep, used in generating the .c files for vector
function tests, matching more than one ALL_RM_TEST line in a file
testing multiple functions with the same inputs, when it assumes that
the .inc file only has a single such line).
Tested for x86_64 and x86, and with build-many-glibcs.py.
clone3 isn't exported from glibc and is hidden in libc.so. Fix BZ #31770
by removing clone3 alias.
Signed-off-by: H.J. Lu <hjl.tools@gmail.com>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
C23 adds various <math.h> function families originally defined in TS
18661-4. Add the log2p1 functions (log2(1+x): like log1p, but for
base-2 logarithms).
This illustrates the intended structure of implementations of all
these function families: define them initially with a type-generic
template implementation. If someone wishes to add type-specific
implementations, it is likely such implementations can be both faster
and more accurate than the type-generic one and can then override it
for types for which they are implemented (adding benchmarks would be
desirable in such cases to demonstrate that a new implementation is
indeed faster).
The test inputs are copied from those for log1p. Note that these
changes make gen-auto-libm-tests depend on MPFR 4.2 (or later).
The bulk of the changes are fairly generic for any such new function.
(sysdeps/powerpc/nofpu/Makefile only needs changing for those
type-generic templates that use fabs.)
Tested for x86_64 and x86, and with build-many-glibcs.py.
Linux 6.8 adds five new syscalls. Update syscall-names.list and
regenerate the arch-syscall.h headers with build-many-glibcs.py
update-syscalls.
Tested with build-many-glibcs.py.
_dl_tlsdesc_dynamic should also preserve AMX registers which are
caller-saved. Add X86_XSTATE_TILECFG_ID and X86_XSTATE_TILEDATA_ID
to x86-64 TLSDESC_CALL_STATE_SAVE_MASK. Compute the AMX state size
and save it in xsave_state_full_size which is only used by
_dl_tlsdesc_dynamic_xsave and _dl_tlsdesc_dynamic_xsavec. This fixes
the AMX part of BZ #31372. Tested on AMX processor.
AMX test is enabled only for compilers with the fix for
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=114098
GCC 14 and GCC 11/12/13 branches have the bug fix.
Reviewed-by: Sunil K Pandey <skpgkp2@gmail.com>
Commit ff026950e2 ("Add a C wrapper for
prctl [BZ #25896]") replaced the assembler wrapper with a C function.
However, on powerpc64le-linux-gnu, the C variadic function
implementation requires extra work in the caller to set up the
parameter save area. Calling a function that needs a parameter save
area without one (because the prototype used indicates the function is
not variadic) corrupts the caller's stack. The Linux manual pages
project documents prctl as a non-variadic function. This has resulted
in various projects over the years using non-variadic prototypes,
including the sanitizer libraries in LLVm and GCC (GCC PR 113728).
This commit switches back to the assembler implementation on most
targets and only keeps the C implementation for x86-64 x32.
Also add the __prctl_time64 alias from commit
b39ffab860 ("Linux: Add time64 alias for
prctl") to sysdeps/unix/sysv/linux/syscalls.list; it was not yet
present in commit ff026950e2.
This restores the old ABI on powerpc64le-linux-gnu, thus fixing
bug 29770.
Reviewed-By: Simon Chopin <simon.chopin@canonical.com>
Linux 6.7 adds the futex_requeue, futex_wait and futex_wake syscalls,
and enables map_shadow_stack for architectures previously missing it.
Update syscall-names.list and regenerate the arch-syscall.h headers
with build-many-glibcs.py update-syscalls.
Tested with build-many-glibcs.py.
Systemd execution environment configuration may prohibit changing a memory
mapping to become executable:
MemoryDenyWriteExecute=
Takes a boolean argument. If set, attempts to create memory mappings
that are writable and executable at the same time, or to change existing
memory mappings to become executable, or mapping shared memory segments
as executable, are prohibited.
When it is set, systemd service stops working if PLT rewrite is enabled.
Check if mprotect works before rewriting PLT. This fixes BZ #31230.
This also works with SELinux when deny_execmem is on.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Remove the error handling wrapper from exp10. This is very similar to
the changes done to exp and exp2, except that we also need to handle
pow10 and pow10l.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
CET feature bits in TCB, which are Linux specific, are used to check if
CET features are active. Move CET feature check to Linux/x86 directory.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
1. Remove _dl_runtime_resolve_shstk and _dl_runtime_profile_shstk.
2. Move CET offsets from x86 cpu-features-offsets.sym to x86-64
features-offsets.sym.
3. Rename x86 cet-control.h to x86-64 feature-control.h since it is only
for x86-64 and also used for PLT rewrite.
4. Add x86-64 ldsodefs.h to include feature-control.h.
5. Change TUNABLE_CALLBACK (set_plt_rewrite) to x86-64 only.
6. Move x86 dl-procruntime.c to x86-64.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
The CET is only supported for x86_64 and there is no plan to add
kernel support for i386. Move the Makefile rules and files from the
generic x86 folder to x86_64 one.
Checked on x86_64-linux-gnu and i686-linux-gnu.
setcontext and swapcontext put a restore token on the old shadow stack
which is used to restore the target shadow stack when switching user
contexts. When longjmp from a user context, the target shadow stack
can be different from the current shadow stack and INCSSP can't be
used to restore the shadow stack pointer to the target shadow stack.
Update longjmp to search for a restore token. If found, use the token
to restore the shadow stack pointer before using INCSSP to pop the
shadow stack. Stop the token search and use INCSSP if the shadow stack
entry value is the same as the current shadow stack pointer.
It is a user error if there is a shadow stack switch without leaving a
restore token on the old shadow stack.
The only difference between __longjmp.S and __longjmp_chk.S is that
__longjmp_chk.S has a check for invalid longjmp usages. Merge
__longjmp.S and __longjmp_chk.S by adding the CHECK_INVALID_LONGJMP
macro.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
C23 adds a header <stdbit.h> with various functions and type-generic
macros for bit-manipulation of unsigned integers (plus macro defines
related to endianness). Implement this header for glibc.
The functions have both inline definitions in the header (referenced
by macros defined in the header) and copies with external linkage in
the library (which are implemented in terms of those macros to avoid
duplication). They are documented in the glibc manual. Tests, as
well as verifying results for various inputs (of both the macros and
the out-of-line functions), verify the types of those results (which
showed up a bug in an earlier version with the type-generic macro
stdc_has_single_bit wrongly returning a promoted type), that the
macros can be used at top level in a source file (so don't use ({})),
that they evaluate their arguments exactly once, and that the macros
for the type-specific functions have the expected implicit conversions
to the relevant argument type.
Jakub previously referred to -Wconversion warnings in type-generic
macros, so I've included a test with -Wconversion (but the only
warnings I saw and fixed from that test were actually in inline
functions in the <stdbit.h> header - not anything coming from use of
the type-generic macros themselves).
This implementation of the type-generic macros does not handle
unsigned __int128, or unsigned _BitInt types with a width other than
that of a standard integer type (and C23 doesn't require the header to
handle such types either). Support for those types, using the new
type-generic built-in functions Jakub's added for GCC 14, can
reasonably be added in a followup (along of course with associated
tests).
This implementation doesn't do anything special to handle C++, or have
any tests of functionality in C++ beyond the existing tests that all
headers can be compiled in C++ code; it's not clear exactly what form
this header should take in C++, but probably not one using macros.
DIS ballot comment AT-107 asks for the word "count" to be added to the
names of the stdc_leading_zeros, stdc_leading_ones,
stdc_trailing_zeros and stdc_trailing_ones functions and macros. I
don't think it's likely to be accepted (accepting any technical
comments would mean having an FDIS ballot), but if it is accepted at
the WG14 meeting (22-26 January in Strasbourg, starting with DIS
ballot comment handling) then there would still be time to update
glibc for the renaming before the 2.39 release.
The new functions and header are placed in the stdlib/ directory in
glibc, rather than creating a new toplevel stdbit/ or putting them in
string/ alongside ffs.
Tested for x86_64 and x86.
Previously, CET was enabled by kernel before passing control to user
space and the startup code must disable CET if applications or shared
libraries aren't CET enabled. Since the current kernel only supports
shadow stack and won't enable shadow stack before passing control to
user space, we need to enable shadow stack during startup if the
application and all shared library are shadow stack enabled. There
is no need to disable shadow stack at startup. Shadow stack can only
be enabled in a function which will never return. Otherwise, shadow
stack will underflow at the function return.
1. GL(dl_x86_feature_1) is set to the CET features which are supported
by the processor and are not disabled by the tunable. Only non-zero
features in GL(dl_x86_feature_1) should be enabled. After enabling
shadow stack with ARCH_SHSTK_ENABLE, ARCH_SHSTK_STATUS is used to check
if shadow stack is really enabled.
2. Use ARCH_SHSTK_ENABLE in RTLD_START in dynamic executable. It is
safe since RTLD_START never returns.
3. Call arch_prctl (ARCH_SHSTK_ENABLE) from ARCH_SETUP_TLS in static
executable. Since the start function using ARCH_SETUP_TLS never returns,
it is safe to enable shadow stack in ARCH_SETUP_TLS.
Sync with Linux kernel 6.6 shadow stack interface. Since only x86-64 is
supported, i386 shadow stack codes are unchanged and CET shouldn't be
enabled for i386.
1. When the shadow stack base in TCB is unset, the default shadow stack
is in use. Use the current shadow stack pointer as the marker for the
default shadow stack. It is used to identify if the current shadow stack
is the same as the target shadow stack when switching ucontexts. If yes,
INCSSP will be used to unwind shadow stack. Otherwise, shadow stack
restore token will be used.
2. Allocate shadow stack with the map_shadow_stack syscall. Since there
is no function to explicitly release ucontext, there is no place to
release shadow stack allocated by map_shadow_stack in ucontext functions.
Such shadow stacks will be leaked.
3. Rename arch_prctl CET commands to ARCH_SHSTK_XXX.
4. Rewrite the CET control functions with the current kernel shadow stack
interface.
Since CET is no longer enabled by kernel, a separate patch will enable
shadow stack during startup.
All the crypt related functions, cryptographic algorithms, and
make requirements are removed, with only the exception of md5
implementation which is moved to locale folder since it is
required by localedef for integrity protection (libc's
locale-reading code does not check these, but localedef does
generate them).
Besides thec code itself, both internal documentation and the
manual is also adjusted. This allows to remove both --enable-crypt
and --enable-nss-crypt configure options.
Checked with a build for all affected ABIs.
Co-authored-by: Zack Weinberg <zack@owlfolio.org>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Linux 6.5 has one new syscall, cachestat, and also enables the
cacheflush syscall for hppa. Update syscall-names.list and regenerate
the arch-syscall.h headers with build-many-glibcs.py update-syscalls.
Tested with build-many-glibcs.py.
This interface allows to obtain the associated process ID from the
process file descriptor. It is done by parsing the procps fdinfo
information. Its prototype is:
pid_t pidfd_getpid (int fd)
It returns the associated pid or -1 in case of an error and sets the
errno accordingly. The possible errno values are those from open, read,
and close (used on procps parsing), along with:
- EBADF if the FD is negative, does not have a PID associated, or if
the fdinfo fields contain a value larger than pid_t.
- EREMOTE if the PID is in a separate namespace.
- ESRCH if the process is already terminated.
Checked on x86_64-linux-gnu on Linux 4.15 (no CLONE_PIDFD or waitid
support), Linux 5.4 (full support), and Linux 6.2.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
Returning a pidfd allows a process to keep a race-free handle for a
child process, otherwise, the caller will need to either use pidfd_open
(which still might be subject to TOCTOU) or keep the old racy interface
base on pid_t.
To correct use pifd_spawn, the kernel must support not only returning
the pidfd with clone/clone3 but also waitid (P_PIDFD) (added on Linux
5.4). If kernel does not support the waitid, pidfd return ENOSYS.
It avoids the need to racy workarounds, such as reading the procfs
fdinfo to get the pid to use along with other wait interfaces.
These interfaces are similar to the posix_spawn and posix_spawnp, with
the only difference being it returns a process file descriptor (int)
instead of a process ID (pid_t). Their prototypes are:
int pidfd_spawn (int *restrict pidfd,
const char *restrict file,
const posix_spawn_file_actions_t *restrict facts,
const posix_spawnattr_t *restrict attrp,
char *const argv[restrict],
char *const envp[restrict])
int pidfd_spawnp (int *restrict pidfd,
const char *restrict path,
const posix_spawn_file_actions_t *restrict facts,
const posix_spawnattr_t *restrict attrp,
char *const argv[restrict_arr],
char *const envp[restrict_arr]);
A new symbol is used instead of a posix_spawn extension to avoid
possible issues with language bindings that might track the return
argument lifetime. Although on Linux pid_t and int are interchangeable,
POSIX only states that pid_t should be a signed integer.
Both symbols reuse the posix_spawn posix_spawn_file_actions_t and
posix_spawnattr_t, to void rehash posix_spawn API or add a new one. It
also means that both interfaces support the same attribute and file
actions, and a new flag or file action on posix_spawn is also added
automatically for pidfd_spawn.
Also, using posix_spawn plumbing allows the reusing of most of the
current testing with some changes:
- waitid is used instead of waitpid since it is a more generic
interface.
- tst-posix_spawn-setsid.c is adapted to take into consideration that
the caller can check for session id directly. The test now spawns
itself and writes the session id as a file instead.
- tst-spawn3.c need to know where pidfd_spawn is used so it keeps an
extra file description unused.
Checked on x86_64-linux-gnu on Linux 4.15 (no CLONE_PIDFD or waitid
support), Linux 5.4 (full support), and Linux 6.2.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
These functions allow to posix_spawn and posix_spawnp to use
CLONE_INTO_CGROUP with clone3, allowing the child process to
be created in a different cgroup version 2. These are GNU
extensions that are available only for Linux, and also only
for the architectures that implement clone3 wrapper
(HAVE_CLONE3_WRAPPER).
To create a process on a different cgroupv2, one can use the:
posix_spawnattr_t attr;
posix_spawnattr_init (&attr);
posix_spawnattr_setflags (&attr, POSIX_SPAWN_SETCGROUP);
posix_spawnattr_setcgroup_np (&attr, cgroup);
posix_spawn (...)
Similar to other posix_spawn flags, POSIX_SPAWN_SETCGROUP control
whether the cgroup file descriptor will be used or not with
clone3.
There is no fallback if either clone3 does not support the flag
or if the architecture does not provide the clone3 wrapper, in
this case posix_spawn returns EOPNOTSUPP.
Checked on x86_64-linux-gnu.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
Bump autoconf requirement to 2.71 to allow regenerating configure on
more recent distributions. autoconf 2.71 has been in Fedora since F36
and is the current version in Debian stable (bookworm). It appears to
be current in Gentoo as well.
All sysdeps configure and preconfigure scripts have also been
regenerated; all changes are trivial transformations that do not affect
functionality.
Signed-off-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
These files could be useful to any port that wants to use ld.so.cache.
Signed-off-by: Sergey Bugaev <bugaevc@gmail.com>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
These functions are about to be added to POSIX, under Austin Group
issue 986.
The fortified strlcat implementation does not raise SIGABRT if the
destination buffer does not contain a null terminator, it just
inherits the non-failing regular strlcat behavior.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
H.J. Lu
Paul Eggert
Florian Weimer
Adhemerval Zanella
Joseph Myers
Wilco Dijkstra
Noah Goldstein
Joseph Myers
Joseph Myers
Siddhesh Poyarekar
Sergey Bugaev