mirror of git://sourceware.org/git/glibc.git
2114 Commits
| Author | SHA1 | Message | Date |
|---|---|---|---|
Rafal Luzynski
|
c553cd6f7e |
NEWS: Mention the locale data changes (bug 22848, 22937, 22963).
Alternative (nominative/genitive) month names have been added to the Catalan and Czech locale data and the abbreviated alternative names to Catalan and Greek. |
|
Zack Weinberg
|
2cc7bad0ae |
[BZ 1190] Make EOF sticky in stdio.
C99 specifies that the EOF condition on a file is "sticky": once EOF has been encountered, all subsequent reads should continue to return EOF until the file is closed or something clears the "end-of-file indicator" (e.g. fseek, clearerr). This is arguably a change from C89, where the wording was ambiguous; the BSDs always had sticky EOF, but the System V lineage would attempt to read from the underlying fd again. GNU libc has followed System V for as long as we've been using libio, but nowadays C99 conformance and BSD compatibility are more important than System V compatibility. You might wonder if changing the _underflow impls is sufficient to apply the C99 semantics to all of the many stdio functions that perform input. It should be enough to cover all paths to _IO_SYSREAD, and the only other functions that call _IO_SYSREAD are the _seekoff impls, which is OK because seeking clears EOF, and the _xsgetn impls, which, as far as I can tell, are unused within glibc. The test programs in this patch use a pseudoterminal to set up the necessary conditions. To facilitate this I added a new test-support function that sets up a pair of pty file descriptors for you; it's almost the same as BSD openpty, the only differences are that it allocates the optionally-returned tty pathname with malloc, and that it crashes if anything goes wrong. [BZ #1190] [BZ #19476] * libio/fileops.c (_IO_new_file_underflow): Return EOF immediately if the _IO_EOF_SEEN bit is already set; update commentary. * libio/oldfileops.c (_IO_old_file_underflow): Likewise. * libio/wfileops.c (_IO_wfile_underflow): Likewise. * support/support_openpty.c, support/tty.h: New files. * support/Makefile (libsupport-routines): Add support_openpty. * libio/tst-fgetc-after-eof.c, wcsmbs/test-fgetwc-after-eof.c: New test cases. * libio/Makefile (tests): Add tst-fgetc-after-eof. * wcsmbs/Makefile (tests): Add tst-fgetwc-after-eof. |
|
|
Zack Weinberg
|
e16deca62e |
[BZ #19239] Don't include sys/sysmacros.h from sys/types.h.
This completes the deprecation and removal of this inclusion, which was begun in the 2.25 release. * posix/sys/types.h: Don't include sys/sysmacros.h. * misc/sys/sysmacros.h: Remove the conditional deprecation warnings for the macros defined by this header. |
|
Joseph Myers
|
d8742dd82f |
Add narrowing add functions.
This patch adds the narrowing add functions from TS 18661-1 to glibc's libm: fadd, faddl, daddl, f32addf64, f32addf32x, f32xaddf64 for all configurations; f32addf64x, f32addf128, f64addf64x, f64addf128, f32xaddf64x, f32xaddf128, f64xaddf128 for configurations with _Float64x and _Float128; __nldbl_daddl for ldbl-opt. As discussed for the build infrastructure patch, tgmath.h support is deliberately deferred, and FP_FAST_* macros are not applicable without optimized function implementations. Function implementations are added for all relevant pairs of formats (including certain cases of a format and itself where more than one type has that format). The main implementations use round-to-odd, or a trivial computation in the case where both formats are the same or where the wider format is IBM long double (in which case we don't attempt to be correctly rounding). The sysdeps/ieee754/soft-fp implementations use soft-fp, and are used automatically for configurations without exceptions and rounding modes by virtue of existing Implies files. As previously discussed, optimized versions for particular architectures are possible, but not included. i386 gets a special version of f32xaddf64 to avoid problems with double rounding (similar to the existing fdim version), since this function must round just once without an intermediate rounding to long double. (No such special version is needed for any other function, because the nontrivial functions use round-to-odd, which does the intermediate computation with the rounding mode set to round-to-zero, and double rounding is OK except in round-to-nearest mode, so is OK for that intermediate round-to-zero computation.) mul and div will need slightly different special versions for i386 (using round-to-odd on long double instead of precision control) because of the possibility of inexact intermediate results in the subnormal range for double. To reduce duplication among the different function implementations, math-narrow.h gets macros CHECK_NARROW_ADD, NARROW_ADD_ROUND_TO_ODD and NARROW_ADD_TRIVIAL. In the trivial cases and for any architecture-specific optimized implementations, the overhead of the errno setting might be significant, but I think that's best handled through compiler built-in functions rather than providing separate no-errno versions in glibc (and likewise there are no __*_finite entry points for these function provided, __*_finite effectively being no-errno versions at present in most cases). Tested for x86_64 and x86, with both GCC 6 and GCC 7. Tested for mips64 (all three ABIs, both hard and soft float) and powerpc with GCC 7. Tested with build-many-glibcs.py with both GCC 6 and GCC 7. * math/Makefile (libm-narrow-fns): Add add. (libm-test-funcs-narrow): Likewise. * math/Versions (GLIBC_2.28): Add narrowing add functions. * math/bits/mathcalls-narrow.h (add): Use __MATHCALL_NARROW . * math/gen-auto-libm-tests.c (test_functions): Add add. * math/math-narrow.h (CHECK_NARROW_ADD): New macro. (NARROW_ADD_ROUND_TO_ODD): Likewise. (NARROW_ADD_TRIVIAL): Likewise. * sysdeps/ieee754/float128/float128_private.h (__faddl): New macro. (__daddl): Likewise. * sysdeps/ieee754/ldbl-opt/Makefile (libnldbl-calls): Add fadd and dadd. (CFLAGS-nldbl-dadd.c): New variable. (CFLAGS-nldbl-fadd.c): Likewise. * sysdeps/ieee754/ldbl-opt/Versions (GLIBC_2.28): Add __nldbl_daddl. * sysdeps/ieee754/ldbl-opt/nldbl-compat.h (__nldbl_daddl): New prototype. * manual/arith.texi (Misc FP Arithmetic): Document fadd, faddl, daddl, fMaddfN, fMaddfNx, fMxaddfN and fMxaddfNx. * math/auto-libm-test-in: Add tests of add. * math/auto-libm-test-out-narrow-add: New generated file. * math/libm-test-narrow-add.inc: New file. * sysdeps/i386/fpu/s_f32xaddf64.c: Likewise. * sysdeps/ieee754/dbl-64/s_f32xaddf64.c: Likewise. * sysdeps/ieee754/dbl-64/s_fadd.c: Likewise. * sysdeps/ieee754/float128/s_f32addf128.c: Likewise. * sysdeps/ieee754/float128/s_f64addf128.c: Likewise. * sysdeps/ieee754/float128/s_f64xaddf128.c: Likewise. * sysdeps/ieee754/ldbl-128/s_daddl.c: Likewise. * sysdeps/ieee754/ldbl-128/s_f64xaddf128.c: Likewise. * sysdeps/ieee754/ldbl-128/s_faddl.c: Likewise. * sysdeps/ieee754/ldbl-128ibm/s_daddl.c: Likewise. * sysdeps/ieee754/ldbl-128ibm/s_faddl.c: Likewise. * sysdeps/ieee754/ldbl-96/s_daddl.c: Likewise. * sysdeps/ieee754/ldbl-96/s_faddl.c: Likewise. * sysdeps/ieee754/ldbl-opt/nldbl-dadd.c: Likewise. * sysdeps/ieee754/ldbl-opt/nldbl-fadd.c: Likewise. * sysdeps/ieee754/soft-fp/s_daddl.c: Likewise. * sysdeps/ieee754/soft-fp/s_fadd.c: Likewise. * sysdeps/ieee754/soft-fp/s_faddl.c: Likewise. * sysdeps/powerpc/fpu/libm-test-ulps: Update. * sysdeps/mach/hurd/i386/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/riscv/rv64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise. |
|
|
Zack Weinberg
|
a4fea3f2c3 |
Don't install libio.h or _G_config.h.
We shipped 2.27 with libio.h and _G_config.h still installed but
issuing warnings when used. Let's stop installing them early in 2.28
so that we have plenty of time to think of another plan if there are
problems.
The public stdio.h had a genuine dependency on libio.h for the
complete definitions of FILE and cookie_io_functions_t, and a genuine
dependency on _G_config.h for the complete definitions of fpos_t and
fpos64_t; these are moved to single-type headers.
bits/types/struct_FILE.h also provides a handful of accessor and
bitflags macros so that code is not duplicated between bits/stdio.h
and libio.h. All the other _IO_ and _G_ names used by the public
stdio.h can be replaced with either public names or __-names.
In order to minimize the risk of breaking our own compatibility code,
bits/types/struct_FILE.h preserves the _IO_USE_OLD_IO_FILE mechanism
exactly as it was in libio.h, but you have to define _LIBC to use it,
or it'll error out. Similarly, _IO_lock_t_defined is preserved
exactly, but will error out if used without defining _LIBC.
Internally, include/stdio.h continues to include libio.h, and libio.h
scrupulously provides every _IO_* and _G_* name that it always did,
perhaps now defined in terms of the public names. This is how this
patch avoids touching dozens of files throughout glibc and becoming
entangled with the _IO_MTSAFE_IO mess. The remaining patches in this
series eliminate most of the _G_ names.
Tested on x86_64-linux; in addition to the test suite, I installed the
library in a sysroot and verified that a simple program that uses
stdio.h could be compiled against the installed library, and I also
verified that installed stripped libraries are unchanged.
* libio/bits/types/__fpos_t.h, libio/bits/types/__fpos64_t.h:
New single-type headers split from _G_config.h.
* libio/bits/types/cookie_io_functions_t.h
* libio/bits/types/struct_FILE.h
New single-type headers split from libio.h.
* libio/Makefile: Install the above new headers. Don't install
libio.h, _G_config.h, bits/libio.h, bits/_G_config.h, or
bits/libio-ldbl.h.
* libio/_G_config.h, libio/libio.h: Delete file.
* libio/bits/libio.h: Remove improper-inclusion guard.
Include stdio.h and don't repeat anything that it does.
Define _IO_fpos_t as __fpos_t, _IO_fpos64_t as __fpos64_t,
_IO_BUFSIZ as BUFSIZ, _IO_va_list as __gnuc_va_list,
__io_read_fn as cookie_read_function_t,
__io_write_fn as cookie_write_function_t,
__io_seek_fn as cookie_seek_function_t,
__io_close_fn as cookie_close_function_t,
and _IO_cookie_io_functions_t as cookie_io_functions_t.
Define _STDIO_USES_IOSTREAM, __HAVE_COLUMN, and _IO_file_flags
here, in the "compatibility defines" section. Remove an #if 0
block. Use the "body" macros from bits/types/struct_FILE.h to
define _IO_getc_unlocked, _IO_putc_unlocked, _IO_feof_unlocked,
and _IO_ferror_unlocked.
Move prototypes of __uflow and __overflow...
* libio/stdio.h: ...here. Don't include bits/libio.h.
Don't define _STDIO_USES_IOSTREAM. Get __gnuc_va_list
directly from stdarg.h. Include bits/types/__fpos_t.h,
bits/types/__fpos64_t.h, bits/types/struct_FILE.h,
and, when __USE_GNU, bits/types/cookie_io_functions_t.h.
Use __gnuc_va_list, not _G_va_list; __fpos_t, not _G_fpos_t;
__fpos64_t, not _G_fpos64_t; FILE, not struct _IO_FILE;
cookie_io_functions_t, not _IO_cookie_io_functions_t;
__ssize_t, not _IO_ssize_t. Unconditionally define
BUFSIZ as 8192 and EOF as (-1).
* libio/bits/stdio.h: Add multiple-include guard. Use the "body"
macros from bits/types/struct_FILE.h instead of _IO_* macros
from libio.h; use __gnuc_va_list instead of va_list and __ssize_t
instead of _IO_ssize_t.
* libio/bits/stdio2.h: Similarly.
* libio/iolibio.h: Add multiple-include guard.
Include bits/libio.h after stdio.h.
* libio/libioP.h: Add multiple-include guard.
Include stdio.h and bits/libio.h before iolibio.h.
* include/bits/types/__fpos_t.h, include/bits/types/__fpos64_t.h
* include/bits/types/cookie_io_functions_t.h
* include/bits/types/struct_FILE.h: New wrappers.
* bits/_G_config.h, sysdeps/unix/sysv/linux/_G_config.h:
Get definitions of _G_fpos_t and _G_fpos64_t from
bits/types/__fpos_t.h and bits/types/__fpos64_t.h
respectively. Remove improper-inclusion guards.
* conform/data/stdio.h-data: Update expectations of va_list.
* scripts/check-installed-headers.sh: Remove special case for
libio.h and _G_config.h.
|
|
Florian Weimer
|
71aa429b02 | Record CVE-2018-6551 in NEWS and ChangeLog [BZ #22774] | |
|
Zack Weinberg
|
26c07172cd |
Remove getc and putc macros from the public stdio.h.
The getc and putc macros in the public stdio.h expand to call _IO_getc and _IO_putc respectively. As _IO_getc, fgetc, and getc are all aliases for the same function, and _IO_putc, fputc, and putc are also all aliases for the same function, the macros are pointless. The C standard does not require getc and putc to be macros, so let's just not have macros. All four symbols are exported from libc.so at the same, ancient symbol version, so there should be no risks for binary compatibility. Similarly, the getchar and putchar inlines in bits/stdio.h forward to getc and putc instead of their _IO_ aliases. As a change from longstanding historical practice, this does seem like it might break _something_, so there is a note in NEWS, which is also a convenient place to advise people that if they thought getc and putc had reduced per-character overhead they should consider using getc_unlocked and putc_unlocked instead. (These are also not macros, but when optimizing, they are inlines.) * libio/stdio.h: Don't define getc or putc as macros. * libio/bits/stdio.h (getchar, putchar): Use getc and putc, not _IO_getc and _IO_putc. |
|
Dmitry V. Levin
|
086ee48eae | Open master branch for glibc 2.28 development | |
|
Dmitry V. Levin
|
242cbc9047 | NEWS: add the list of bugs fixed in 2.27 | |
|
Florian Weimer
|
4590634fd6 | Record CVE-2018-6485 in ChangeLog and NEWS [BZ #22343] | |
|
Rafal Luzynski
|
c10c9a5efe |
NEWS: List the languages which use the alternative months.
[BZ #10871] * NEWS: List the languages which actually use the alternative months feature in this release. Also explain that "alt_mon" and "ab_alt_mon" are optional. |
|
Palmer Dabbelt
|
40ca951bdb
|
Skeleton documentation for the RISC-V port
During the upstreaming process it was suggested that I add a handful of
small documentation entries about the RISC-V port, which I've collected
here.
2018-01-29 Palmer Dabbelt <palmer@sifive.com>
* manual/math.texi: RISC-V supports _Float128 and _Float64x.
|
|
|
Rafal Luzynski
|
d4ae782776 | NEWS: Fix spelling mistake: "%ob" -> "%Ob". | |
|
Dmitry V. Levin
|
bd7bbb26f3 | NEWS: fix spelling mistake | |
Carlos O'Donell
|
0a32e21951 | NEWS: Fix spelling mistake. | |
|
Carlos O'Donell
|
4378b735ef | NEWS: Document static application consequenes of %OB/%Ob. | |
Szabolcs Nagy
|
25fb7dd651 | Fix the wording in NEWS to use "or later" | |
|
Szabolcs Nagy
|
21c0696cde | Update NEWS with binutils version requirement for static PIE support | |
|
Rafal Luzynski
|
22390764f9 |
Documentation to the above changes (bug 10871).
[BZ #10871] * manual/locale.texi: Document ALTMON_1..12 constants for nl_langinfo. Specify when to use ALTMON instead of MON. * manual/time.texi (strftime, strptime): Document GNU extension permitting O modifier with %B and %b. Specify when to use %OB instead of %B. Reviewed-by: Carlos O'Donell <carlos@redhat.com> |
|
|
Dmitry V. Levin
|
52a713fdd0 |
linux: make getcwd(3) fail if it cannot obtain an absolute path [BZ #22679]
Currently getcwd(3) can succeed without returning an absolute path because the underlying getcwd syscall, starting with linux commit v2.6.36-rc1~96^2~2, may succeed without returning an absolute path. This is a conformance issue because "The getcwd() function shall place an absolute pathname of the current working directory in the array pointed to by buf, and return buf". This is also a security issue because a non-absolute path returned by getcwd(3) causes a buffer underflow in realpath(3). Fix this by checking the path returned by getcwd syscall and falling back to generic_getcwd if the path is not absolute, effectively making getcwd(3) fail with ENOENT. The error code is chosen for consistency with the case when the current directory is unlinked. [BZ #22679] CVE-2018-1000001 * sysdeps/unix/sysv/linux/getcwd.c (__getcwd): Fall back to generic_getcwd if the path returned by getcwd syscall is not absolute. * io/tst-getcwd-abspath.c: New test. * io/Makefile (tests): Add tst-getcwd-abspath. |
|
H.J. Lu
|
c70e4e9c9e |
x86-64: Add sincosf with vector FMA
Since the x86-64 assembly version of sincosf is higly optimized with
vector instructions, there isn't much room for improvement. However
s_sincosf.c written in C with vector math and intrinsics can be
optimized by GCC with FMA.
On Skylake, bench-sincosf reports performance improvement:
Assembly FMA improvement
max 104.042 101.008 3%
min 9.426 8.586 10%
mean 20.6209 18.2238 13%
* sysdeps/x86_64/fpu/multiarch/Makefile (libm-sysdep_routines):
Add s_sincosf-sse2 and s_sincosf-fma.
(CFLAGS-s_sincosf-fma.c): New.
* sysdeps/x86_64/fpu/multiarch/s_sincosf-fma.c: New file.
* sysdeps/x86_64/fpu/multiarch/s_sincosf-sse2.S: Likewise.
* sysdeps/x86_64/fpu/multiarch/s_sincosf.c: Likewise.
* sysdeps/x86_64/fpu/s_sincosf.S: Don't add alias if
__sincosf is defined.
|
|
|
Florian Weimer
|
f1a844ac63 | NEWS: Deprecate static dlopen | |
|
Florian Weimer
|
2fc21aaad9 | NEWS: Deprecate direct access libio internals | |
Rajalakshmi Srinivasaraghavan
|
4cf82d2379 | Update NEWS to add cosf and sincosf optimization | |
|
Joseph Myers
|
09533208fe |
Update copyright dates not handled by scripts/update-copyrights.
I've updated copyright dates in glibc for 2018. This is the patch for the changes not generated by scripts/update-copyrights and subsequent build / regeneration of generated files. Please remember to include 2018 in the dates for any new files added in future (which means updating any existing uncommitted patches you have that add new files to use the new copyright dates in them). * NEWS: Update copyright dates. * catgets/gencat.c (print_version): Likewise. * csu/version.c (banner): Likewise. * debug/catchsegv.sh: Likewise. * debug/pcprofiledump.c (print_version): Likewise. * debug/xtrace.sh (do_version): Likewise. * elf/ldconfig.c (print_version): Likewise. * elf/ldd.bash.in: Likewise. * elf/pldd.c (print_version): Likewise. * elf/sotruss.sh: Likewise. * elf/sprof.c (print_version): Likewise. * iconv/iconv_prog.c (print_version): Likewise. * iconv/iconvconfig.c (print_version): Likewise. * locale/programs/locale.c (print_version): Likewise. * locale/programs/localedef.c (print_version): Likewise. * login/programs/pt_chown.c (print_version): Likewise. * malloc/memusage.sh (do_version): Likewise. * malloc/memusagestat.c (print_version): Likewise. * malloc/mtrace.pl: Likewise. * manual/libc.texinfo: Likewise. * nptl/version.c (banner): Likewise. * nscd/nscd.c (print_version): Likewise. * nss/getent.c (print_version): Likewise. * nss/makedb.c (print_version): Likewise. * posix/getconf.c (main): Likewise. * scripts/test-installation.pl: Likewise. * sysdeps/unix/sysv/linux/lddlibc4.c (main): Likewise. |
|
|
Joseph Myers
|
688903eb3e |
Update copyright dates with scripts/update-copyrights.
* All files with FSF copyright notices: Update copyright dates using scripts/update-copyrights. * locale/programs/charmap-kw.h: Regenerated. * locale/programs/locfile-kw.h: Likewise. |
|
Aurelien Jarno
|
3e3c904dae |
elf: Check for empty tokens before dynamic string token expansion [BZ #22625]
The fillin_rpath function in elf/dl-load.c loops over each RPATH or
RUNPATH tokens and interprets empty tokens as the current directory
("./"). In practice the check for empty token is done *after* the
dynamic string token expansion. The expansion process can return an
empty string for the $ORIGIN token if __libc_enable_secure is set
or if the path of the binary can not be determined (/proc not mounted).
Fix that by moving the check for empty tokens before the dynamic string
token expansion. In addition, check for NULL pointer or empty strings
return by expand_dynamic_string_token.
The above changes highlighted a bug in decompose_rpath, an empty array
is represented by the first element being NULL at the fillin_rpath
level, but by using a -1 pointer in decompose_rpath and other functions.
Changelog:
[BZ #22625]
* elf/dl-load.c (fillin_rpath): Check for empty tokens before dynamic
string token expansion. Check for NULL pointer or empty string possibly
returned by expand_dynamic_string_token.
(decompose_rpath): Check for empty path after dynamic string
token expansion.
|
|
|
Zack Weinberg
|
48a8f83281 |
Deprecate external use of libio.h and _G_config.h.
libio.h was originally the header for a set of supported GNU extensions, but they have not been maintained as such in many years, they are now standing in the way of improvements to stdio, and we don't think there are any remaining external users. _G_config.h was never intended for public use, but predates the bits convention. Move both of these headers into the bits directory and provide stubs at top level which issue deprecation warnings. The contents of (bits/)libio.h and (bits/)_G_config.h are still exposed to external software via stdio.h; changing that requires more complex surgery than I have time to attempt right now. * libio/libio.h, libio/_G_config.h: New stub headers which issue a deprecation warning and then include <bits/libio.h>, <bits/_G_config.h> respectively. * libio/libio.h: Rename the original version of this file to libio/bits/libio.h. Error out if not included by stdio.h or the stub libio.h. * include/libio.h: Move to include/bits. Forward to libio/bits/libio.h. * sysdeps/generic/_G_config.h: Move to top-level bits/. Error out if not included by bits/libio.h or the stub _G_config.h. * sysdeps/unix/sysv/linux/_G_config.h: Move to sysdeps/unix/sysv/linux/bits. Error out if not included by bits/libio.h or the stub _G_config.h. * libio/stdio.h: Include bits/libio.h, not libio.h. * libio/Makefile: Install bits/libio.h and bits/_G_config.h as well as libio.h and _G_config.h. * csu/init.c, libio/fmemopen.c, libio/iolibio.h, libio/oldfmemopen.c * libio/strfile.h, stdio-common/vfscanf.c * sysdeps/pthread/flockfile.c, sysdeps/pthread/funlockfile.c Include stdio.h, not _G_config.h nor libio.h. * libio/iofgetpos.c: Also rename fgetpos64 out of the way. * libio/iofsetpos.c: Also rename fsetpos64 out of the way. * scripts/check-installed-headers.sh: Skip libio.h and _G_config.h. |
|
|
Florian Weimer
|
bad7a0c81f |
copy_file_range: New function to copy file data
The semantics are based on the Linux system call, but a very close emulation in user space is provided. |
|
Adhemerval Zanella
|
ed95f61149 |
Remove tilepro-*-linux-gnu support
As from previous discussions [1] this patch removes tileprox-*-linux-gnu support from GLIBC. This patch is a straigthfoward one, which just remove tilepro specific implementation and configurations (no sysdep simplfication or reorganization is done). * README: Remove tilepro-*-linux-gnu from supported architecture. * scripts/build-many-glibcs.py: Likewise. * sysdeps/tile/__tls_get_addr.S (__tls_get_addr): Likewise. * sysdeps/tile/crti.S (PREINIT_FUNCTION): Likewise. * sysdeps/tile/dl-machine.h (ELF_MACHINE_NAME, elf_machine_matches_host, elf_machine_dynamic, elf_machine_load_address, elf_machine_runtime_setup, reloc_howto howto, elf_machine_rela): Likewise * sysdeps/tile/dl-start.S (_start): Likewise. * sysdeps/tile/memcmp.c (DBLALIGN, REVBYTES): Likewise. * sysdeps/tile/memcopy.h (MEMCPY_OK_FOR_FWD_MEMMOVE, MEMCPY_OK_FOR_FWD_MEMMOVE, op_t): Likewise. * sysdeps/tile/nptl/pthread_spin_lock.c (TNS, CMPTNS): Likewise. * sysdeps/tile/nptl/pthread_spin_trylock.c (TNS): Likewise. * sysdeps/tile/nptl/pthread_spin_unlock.c (pthread_spin_unlock): Likewise. * sysdeps/tile/nptl/tls.h (DB_THREAD_SELF): Likewise. * sysdeps/tile/preconfigure: Likewise. * sysdeps/tile/stackguard-macros.h (STACK_CHK_GUARD, POINTER_CHK_GUARD): Likewise. * sysdeps/tile/stackinfo.h (__stackinfo_sub): Likewise. * sysdeps/tile/start.S (_start): Likewise. * sysdeps/tile/tls-macros.h (TLS_GD_OFFSET, TLS_IE_OFFSET, _TLS_LE): Likewise. * sysdeps/tile/sysdep.h (REGSIZE): Likewise. (LD, LD4U, ST, ST4, BNEZ, BEQZ, BEQZT, BGTZ, CMPEQI, CMPEQ, CMOVEQZ, CMOVNEZ): Remove. * sysdeps/unix/sysv/linux/tile/bits/environments.h (__ILP32_OFF32_CFLAGS, __ILP32_OFFBIG_CFLAGS, __ILP32_OFF32_LDFLAGS, __ILP32_OFFBIG_LDFLAGS, __LP64_OFF64_CFLAGS, __LP64_OFF64_LDFLAGS): Likewise. * sysdeps/tile/wordcopy.c (DBLALIGN): Likewise. * sysdeps/tile/tilepro/Implies: Remove file. * sysdeps/tile/tilepro/atomic-machine.h: Likewise. * sysdeps/tile/tilepro/bits/wordsize.h: Likewise. * sysdeps/tile/tilepro/memchr.c: Likewise. * sysdeps/tile/tilepro/memcpy.S: Likewise. * sysdeps/tile/tilepro/memset.c: Likewise. * sysdeps/tile/tilepro/memusage.h: Likewise. * sysdeps/tile/tilepro/rawmemchr.c: Likewise. * sysdeps/tile/tilepro/strchr.c: Likewise. * sysdeps/tile/tilepro/strchrnul.c: Likewise. * sysdeps/tile/tilepro/strlen.c: Likewise. * sysdeps/tile/tilepro/strrchr.c: Likewise. * sysdeps/unix/sysv/linux/tile/tilepro/Implies: Likewise. * sysdeps/unix/sysv/linux/tile/tilepro/c++-types.data: Likewise. * sysdeps/unix/sysv/linux/tile/tilepro/jmp_buf-macros.h: Likewise. * sysdeps/unix/sysv/linux/tile/tilepro/ld.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilepro/ldconfig.h: Likewise. * sysdeps/unix/sysv/linux/tile/tilepro/libBrokenLocale.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilepro/libanl.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilepro/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilepro/libcrypt.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilepro/libdl.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilepro/libnsl.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilepro/libpthread.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilepro/libresolv.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilepro/librt.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilepro/libthread_db.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilepro/libutil.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilepro/register-dump.h: Likewise. * sysdeps/unix/sysv/linux/tile/sysconf.c (linux_sysconf): Remove tilepro mention in comment. [1] https://sourceware.org/ml/libc-alpha/2017-12/msg00038.html |
|
|
Szabolcs Nagy
|
c8e939f12a |
Update NEWS with aarch64 static pie support
The required binutils patches are not in a released version yet, but
glibc has support for static linked pie on aarch64 since commit
|
|
|
Aurelien Jarno
|
7d38eb3897 |
ldconfig: set LC_COLLATE to C [BZ #22505]
ldconfig supports `include' directives and use the glob function to process them. The glob function sort entries according to the LC_COLLATE category. When using a standard "include /etc/ld.so.conf.d/*.conf" entry in /etc/ld.so.conf, the order therefore depends on the locale used to run ldconfig. A few examples of locale specific order that might be disturbing in that context compared to the C locale: - The cs_CZ and sk_SK locales sort the digits after the letters. - The et_EE locale sorts the 'z' between 's' and 't'. This patch fixes that by setting LC_COLLATE to C in order to process files in deterministic order, independently of the locale used to launch ldconfig. NOTE: This should NOT be backported to older release branches. Changelog: [BZ #22505] * elf/ldconfig.c (main): Call setlocale to force LC_COLLATE to C. |
|
|
H.J. Lu
|
9d7a3741c9 |
Add --enable-static-pie configure option to build static PIE [BZ #19574]
Static PIE extends address space layout randomization to static executables. It provides additional security hardening benefits at the cost of some memory and performance. Dynamic linker, ld.so, is a standalone program which can be loaded at any address. This patch adds a configure option, --enable-static-pie, to embed the part of ld.so in static executable to create static position independent executable (static PIE). A static PIE is similar to static executable, but can be loaded at any address without help from a dynamic linker. When --enable-static-pie is used to configure glibc, libc.a is built as PIE and all static executables, including tests, are built as static PIE. The resulting libc.a can be used together with GCC 8 or above to build static PIE with the compiler option, -static-pie. But GCC 8 isn't required to build glibc with --enable-static-pie. Only GCC with PIE support is needed. When an older GCC is used to build glibc with --enable-static-pie, proper input files are passed to linker to create static executables as static PIE, together with "-z text" to prevent dynamic relocations in read-only segments, which are not allowed in static PIE. The following changes are made for static PIE: 1. Add a new function, _dl_relocate_static_pie, to: a. Get the run-time load address. b. Read the dynamic section. c. Perform dynamic relocations. Dynamic linker also performs these steps. But static PIE doesn't load any shared objects. 2. Call _dl_relocate_static_pie at entrance of LIBC_START_MAIN in libc.a. crt1.o, which is used to create dynamic and non-PIE static executables, is updated to include a dummy _dl_relocate_static_pie. rcrt1.o is added to create static PIE, which will link in the real _dl_relocate_static_pie. grcrt1.o is also added to create static PIE with -pg. GCC 8 has been updated to support rcrt1.o and grcrt1.o for static PIE. Static PIE can work on all architectures which support PIE, provided: 1. Target must support accessing of local functions without dynamic relocations, which is needed in start.S to call __libc_start_main with function addresses of __libc_csu_init, __libc_csu_fini and main. All functions in static PIE are local functions. If PIE start.S can't reach main () defined in a shared object, the code sequence: pass address of local_main to __libc_start_main ... local_main: tail call to main via PLT can be used. 2. start.S is updated to check PIC instead SHARED for PIC code path and avoid dynamic relocation, when PIC is defined and SHARED isn't defined, to support static PIE. 3. All assembly codes are updated check PIC instead SHARED for PIC code path to avoid dynamic relocations in read-only sections. 4. All assembly codes are updated check SHARED instead PIC for static symbol name. 5. elf_machine_load_address in dl-machine.h are updated to support static PIE. 6. __brk works without TLS nor dynamic relocations in read-only section so that it can be used by __libc_setup_tls to initializes TLS in static PIE. NB: When glibc is built with GCC defaulted to PIE, libc.a is compiled with -fPIE, regardless if --enable-static-pie is used to configure glibc. When glibc is configured with --enable-static-pie, libc.a is compiled with -fPIE, regardless whether GCC defaults to PIE or not. The same libc.a can be used to build both static executable and static PIE. There is no need for separate PIE copy of libc.a. On x86-64, the normal static sln: text data bss dec hex filename 625425 8284 5456 639165 9c0bd elf/sln the static PIE sln: text data bss dec hex filename 657626 20636 5392 683654 a6e86 elf/sln The code size is increased by 5% and the binary size is increased by 7%. Linker requirements to build glibc with --enable-static-pie: 1. Linker supports --no-dynamic-linker to remove PT_INTERP segment from static PIE. 2. Linker can create working static PIE. The x86-64 linker needs the fix for https://sourceware.org/bugzilla/show_bug.cgi?id=21782 The i386 linker needs to be able to convert "movl main@GOT(%ebx), %eax" to "leal main@GOTOFF(%ebx), %eax" if main is defined locally. Binutils 2.29 or above are OK for i686 and x86-64. But linker status for other targets need to be verified. 3. Linker should resolve undefined weak symbols to 0 in static PIE: https://sourceware.org/bugzilla/show_bug.cgi?id=22269 4. Many ELF backend linkers incorrectly check bfd_link_pic for TLS relocations, which should check bfd_link_executable instead: https://sourceware.org/bugzilla/show_bug.cgi?id=22263 Tested on aarch64, i686 and x86-64. Using GCC 7 and binutils master branch, build-many-glibcs.py with --enable-static-pie with all patches for static PIE applied have the following build successes: PASS: glibcs-aarch64_be-linux-gnu build PASS: glibcs-aarch64-linux-gnu build PASS: glibcs-armeb-linux-gnueabi-be8 build PASS: glibcs-armeb-linux-gnueabi build PASS: glibcs-armeb-linux-gnueabihf-be8 build PASS: glibcs-armeb-linux-gnueabihf build PASS: glibcs-arm-linux-gnueabi build PASS: glibcs-arm-linux-gnueabihf build PASS: glibcs-arm-linux-gnueabihf-v7a build PASS: glibcs-arm-linux-gnueabihf-v7a-disable-multi-arch build PASS: glibcs-m68k-linux-gnu build PASS: glibcs-microblazeel-linux-gnu build PASS: glibcs-microblaze-linux-gnu build PASS: glibcs-mips64el-linux-gnu-n32 build PASS: glibcs-mips64el-linux-gnu-n32-nan2008 build PASS: glibcs-mips64el-linux-gnu-n32-nan2008-soft build PASS: glibcs-mips64el-linux-gnu-n32-soft build PASS: glibcs-mips64el-linux-gnu-n64 build PASS: glibcs-mips64el-linux-gnu-n64-nan2008 build PASS: glibcs-mips64el-linux-gnu-n64-nan2008-soft build PASS: glibcs-mips64el-linux-gnu-n64-soft build PASS: glibcs-mips64-linux-gnu-n32 build PASS: glibcs-mips64-linux-gnu-n32-nan2008 build PASS: glibcs-mips64-linux-gnu-n32-nan2008-soft build PASS: glibcs-mips64-linux-gnu-n32-soft build PASS: glibcs-mips64-linux-gnu-n64 build PASS: glibcs-mips64-linux-gnu-n64-nan2008 build PASS: glibcs-mips64-linux-gnu-n64-nan2008-soft build PASS: glibcs-mips64-linux-gnu-n64-soft build PASS: glibcs-mipsel-linux-gnu build PASS: glibcs-mipsel-linux-gnu-nan2008 build PASS: glibcs-mipsel-linux-gnu-nan2008-soft build PASS: glibcs-mipsel-linux-gnu-soft build PASS: glibcs-mips-linux-gnu build PASS: glibcs-mips-linux-gnu-nan2008 build PASS: glibcs-mips-linux-gnu-nan2008-soft build PASS: glibcs-mips-linux-gnu-soft build PASS: glibcs-nios2-linux-gnu build PASS: glibcs-powerpc64le-linux-gnu build PASS: glibcs-powerpc64-linux-gnu build PASS: glibcs-tilegxbe-linux-gnu-32 build PASS: glibcs-tilegxbe-linux-gnu build PASS: glibcs-tilegx-linux-gnu-32 build PASS: glibcs-tilegx-linux-gnu build PASS: glibcs-tilepro-linux-gnu build and the following build failures: FAIL: glibcs-alpha-linux-gnu build elf/sln is failed to link due to: assertion fail bfd/elf64-alpha.c:4125 This is caused by linker bug and/or non-PIC code in PIE libc.a. FAIL: glibcs-hppa-linux-gnu build elf/sln is failed to link due to: collect2: fatal error: ld terminated with signal 11 [Segmentation fault] https://sourceware.org/bugzilla/show_bug.cgi?id=22537 FAIL: glibcs-ia64-linux-gnu build elf/sln is failed to link due to: collect2: fatal error: ld terminated with signal 11 [Segmentation fault] FAIL: glibcs-powerpc-linux-gnu build FAIL: glibcs-powerpc-linux-gnu-soft build FAIL: glibcs-powerpc-linux-gnuspe build FAIL: glibcs-powerpc-linux-gnuspe-e500v1 build elf/sln is failed to link due to: ld: read-only segment has dynamic relocations. This is caused by linker bug and/or non-PIC code in PIE libc.a. See: https://sourceware.org/bugzilla/show_bug.cgi?id=22264 FAIL: glibcs-powerpc-linux-gnu-power4 build elf/sln is failed to link due to: findlocale.c:96:(.text+0x22c): @local call to ifunc memchr This is caused by linker bug and/or non-PIC code in PIE libc.a. FAIL: glibcs-s390-linux-gnu build elf/sln is failed to link due to: collect2: fatal error: ld terminated with signal 11 [Segmentation fault], core dumped assertion fail bfd/elflink.c:14299 This is caused by linker bug and/or non-PIC code in PIE libc.a. FAIL: glibcs-sh3eb-linux-gnu build FAIL: glibcs-sh3-linux-gnu build FAIL: glibcs-sh4eb-linux-gnu build FAIL: glibcs-sh4eb-linux-gnu-soft build FAIL: glibcs-sh4-linux-gnu build FAIL: glibcs-sh4-linux-gnu-soft build elf/sln is failed to link due to: ld: read-only segment has dynamic relocations. This is caused by linker bug and/or non-PIC code in PIE libc.a. See: https://sourceware.org/bugzilla/show_bug.cgi?id=22263 Also TLS code sequence in SH assembly syscalls in glibc doesn't match TLS code sequence expected by ld: https://sourceware.org/bugzilla/show_bug.cgi?id=22270 FAIL: glibcs-sparc64-linux-gnu build FAIL: glibcs-sparcv9-linux-gnu build FAIL: glibcs-tilegxbe-linux-gnu build FAIL: glibcs-tilegxbe-linux-gnu-32 build FAIL: glibcs-tilegx-linux-gnu build FAIL: glibcs-tilegx-linux-gnu-32 build FAIL: glibcs-tilepro-linux-gnu build elf/sln is failed to link due to: ld: read-only segment has dynamic relocations. This is caused by linker bug and/or non-PIC code in PIE libc.a. See: https://sourceware.org/bugzilla/show_bug.cgi?id=22263 [BZ #19574] * INSTALL: Regenerated. * Makeconfig (real-static-start-installed-name): New. (pic-default): Updated for --enable-static-pie. (pie-default): New for --enable-static-pie. (default-pie-ldflag): Likewise. (+link-static-before-libc): Replace $(DEFAULT-LDFLAGS-$(@F)) with $(if $($(@F)-no-pie),$(no-pie-ldflag),$(default-pie-ldflag)). Replace $(static-start-installed-name) with $(real-static-start-installed-name). (+prectorT): Updated for --enable-static-pie. (+postctorT): Likewise. (CFLAGS-.o): Add $(pie-default). (CFLAGS-.op): Likewise. * NEWS: Mention --enable-static-pie. * config.h.in (ENABLE_STATIC_PIE): New. * configure.ac (--enable-static-pie): New configure option. (have-no-dynamic-linker): New LIBC_CONFIG_VAR. (have-static-pie): Likewise. Enable static PIE if linker supports --no-dynamic-linker. (ENABLE_STATIC_PIE): New AC_DEFINE. (enable-static-pie): New LIBC_CONFIG_VAR. * configure: Regenerated. * csu/Makefile (omit-deps): Add r$(start-installed-name) and gr$(start-installed-name) for --enable-static-pie. (extra-objs): Likewise. (install-lib): Likewise. (extra-objs): Add static-reloc.o and static-reloc.os ($(objpfx)$(start-installed-name)): Also depend on $(objpfx)static-reloc.o. ($(objpfx)r$(start-installed-name)): New. ($(objpfx)g$(start-installed-name)): Also depend on $(objpfx)static-reloc.os. ($(objpfx)gr$(start-installed-name)): New. * csu/libc-start.c (LIBC_START_MAIN): Call _dl_relocate_static_pie in libc.a. * csu/libc-tls.c (__libc_setup_tls): Add main_map->l_addr to initimage. * csu/static-reloc.c: New file. * elf/Makefile (routines): Add dl-reloc-static-pie. (elide-routines.os): Likewise. (DEFAULT-LDFLAGS-tst-tls1-static-non-pie): Removed. (tst-tls1-static-non-pie-no-pie): New. * elf/dl-reloc-static-pie.c: New file. * elf/dl-support.c (_dl_get_dl_main_map): New function. * elf/dynamic-link.h (ELF_DURING_STARTUP): Also check STATIC_PIE_BOOTSTRAP. * elf/get-dynamic-info.h (elf_get_dynamic_info): Likewise. * gmon/Makefile (tests): Add tst-gmon-static-pie. (tests-static): Likewise. (DEFAULT-LDFLAGS-tst-gmon-static): Removed. (tst-gmon-static-no-pie): New. (CFLAGS-tst-gmon-static-pie.c): Likewise. (CRT-tst-gmon-static-pie): Likewise. (tst-gmon-static-pie-ENV): Likewise. (tests-special): Likewise. ($(objpfx)tst-gmon-static-pie.out): Likewise. (clean-tst-gmon-static-pie-data): Likewise. ($(objpfx)tst-gmon-static-pie-gprof.out): Likewise. * gmon/tst-gmon-static-pie.c: New file. * manual/install.texi: Document --enable-static-pie. * sysdeps/generic/ldsodefs.h (_dl_relocate_static_pie): New. (_dl_get_dl_main_map): Likewise. * sysdeps/i386/configure.ac: Check if linker supports static PIE. * sysdeps/x86_64/configure.ac: Likewise. * sysdeps/i386/configure: Regenerated. * sysdeps/x86_64/configure: Likewise. * sysdeps/mips/Makefile (ASFLAGS-.o): Add $(pie-default). (ASFLAGS-.op): Likewise. |
|
|
Florian Weimer
|
3ff3dfa5af | elf: Count components of the expanded path in _dl_init_path [BZ #22607] | |
|
Florian Weimer
|
8a0b17e48b | elf: Compute correct array size in _dl_init_paths [BZ #22606] | |
Patrick McGehearty
|
e6a1c5dc77 |
sparc: M7 optimized memset/bzero
Support added to identify Sparc M7/T7/S7/M8/T8 processor capability. Performance tests run on Sparc S7 using new code and old niagara4 code. Optimizations for memset also apply to bzero as they share code. For memset/bzero, performance comparison with niagara4 code: For memset nonzero data, 256-1023 bytes - 60-90% gain (in cache); 5% gain (out of cache) 1K+ bytes - 80-260% gain (in cache); 40-80% gain (out of cache) For memset zero data (and bzero), 256-1023 bytes - 80-120% gain (in cache), 0% gain (out of cache) 1024+ bytes - 2-4x gain (in cache), 10-35% gain (out of cache) Tested in sparcv9-*-* and sparc64-*-* targets in both multi and non-multi arch configurations. Patrick McGehearty <patrick.mcgehearty@oracle.com> Adhemerval Zanella <adhemerval.zanella@linaro.org> * sysdeps/sparc/sparc32/sparcv9/multiarch/Makefile (sysdeps_routines): Add memset-niagara7. * sysdeps/sparc/sparc64/multiarch/Makefile (sysdes_rotuines): Likewise. * sysdeps/sparc/sparc32/sparcv9/multiarch/memset-niagara7.S: New file. * sysdeps/sparc/sparc64/multiarch/memset-niagara7.S: Likewise. * sysdeps/sparc/sparc64/multiarch/ifunc-impl-list.c (__libc_ifunc_impl_list): Add __bzero_niagara7 and __memset_niagara7. * sysdeps/sparc/sparc64/multiarch/ifunc-memset.h (IFUNC_SELECTOR): Add niagara7 option. * NEWS: Mention sparc m7 optimized memcpy, mempcpy, memmove, and memset. |
|
|
H.J. Lu
|
ac817e083b |
x86-64: Add cosf with FMA
On Skylake, bench-cosf reports performance improvement:
Before After Improvement
max 135.362 94.552 43%
min 8.532 7.688 11%
mean 17.1446 11.8128 45%
* sysdeps/x86_64/fpu/multiarch/Makefile (libm-sysdep_routines):
Add s_cosf-sse2 and s_cosf-fma.
(CFLAGS-s_cosf-fma.c): New.
* sysdeps/x86_64/fpu/multiarch/s_cosf-fma.c: New file.
* sysdeps/x86_64/fpu/multiarch/s_cosf-sse2.c: Likewise.
* sysdeps/x86_64/fpu/multiarch/s_cosf.c: Likewise.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
|
|
|
Joseph Myers
|
8df5d34720 |
Remove --with-fp / --without-fp.
There is a configure option --without-fp that specifies that nofpu sysdeps directories should be used instead of fpu directories. For most glibc configurations, this option is of no use: either there is no valid nofpu variant of that configuration, or there are no fpu or nofpu sysdeps directories for that processor and so the option does nothing. For a few configurations, if you are using a soft-float compiler this option is required, and failing to use it generally results in compilation errors from inline asm using unavailable floating-point instructions. We're moving away from --with-cpu to configuring glibc based on how the compiler generates code, and it is natural to do so for --without-fp as well; in most cases the soft-float and hard-float ABIs are incompatible so you have no hope of building a working glibc with an inappropriately configured compiler or libgcc. This patch eliminates --without-fp, replacing it entirely by automatic configuration based on the compiler. Configurations for which this is relevant (coldfire / mips / powerpc32 / sh) define a variable with_fp_cond in their preconfigure fragments (under the same conditions under which those fragments do anything); this is a preprocessor conditional which the toplevel configure script then uses in a test to determine which sysdeps directories to use. The config.make with-fp variable remains. It's used only by powerpc (sysdeps/powerpc/powerpc32/Makefile) to add -mhard-float to various flags variables. For powerpc, -mcpu= options can imply use of soft-float. That could be an issue if you want to build for e.g. 476fp, but are using --with-cpu=476 because there isn't a 476fp sysdeps directory. If in future we eliminate --with-cpu and replace it entirely by testing the compiler, it would be natural at that point to eliminate that code as well (as the user should then just use a compiler defaulting to 476fp and the 476 sysdeps directory would be used automatically). Tested for x86_64, and tested with build-many-glibcs.py that installed shared libraries are unchanged by this patch. * configure.ac (--with-fp): Remove configure option. (with_fp_cond): New variable. (libc_cv_with_fp): New configure test. Use this variable instead of with_fp. * configure: Regenerated. * config.make.in (with-fp): Use @libc_cv_with_fp@. * manual/install.texi (Configuring and compiling): Remove --without-fp. * INSTALL: Regenerated. * sysdeps/m68k/preconfigure (with_fp_cond): Define for ColdFire. * sysdeps/mips/preconfigure (with_fp_cond): Define. * sysdeps/powerpc/preconfigure (with_fp_cond): Define for 32-bit. * sysdeps/sh/preconfigure (with_fp_cond): Define. * scripts/build-many-glibcs.py (Context.add_all_configs): Do not use --without-fp to configure glibc. |
|
|
H.J. Lu
|
9d0ffa60ad |
x86-64: Add sinf with FMA
On Skylake, bench-sinf reports performance improvement:
Before After Improvement
max 153.996 100.094 54%
min 8.546 6.852 25%
mean 18.1223 11.802 54%
* sysdeps/x86_64/fpu/multiarch/Makefile (libm-sysdep_routines):
Add s_sinf-sse2 and s_sinf-fma.
(CFLAGS-s_sinf-fma.c): New.
* sysdeps/x86_64/fpu/multiarch/s_sinf-fma.c: New file.
* sysdeps/x86_64/fpu/multiarch/s_sinf-sse2.c: Likewise.
* sysdeps/x86_64/fpu/multiarch/s_sinf.c: Likewise.
|
|
|
Joseph Myers
|
1f9055ce04 |
Add _Float32 function aliases.
This patch concludes filling out TS 18661-3 support for different types by adding *f32 function aliases of float functions to support _Float32. As with _Float64 and _Float32x, this is supported for all glibc configurations. As with the previous such patches there are some x86 ulps updates because of inline functions present for float but not for _Float32. The patch also has the usual bits/floatn-common.h update, symbol versions, ABI baselines updates, test enablement and documentation. Tested for x86_64 and x86, and with build-many-glibcs.py, with both GCC 6 and GCC 7. * bits/floatn-common.h (__HAVE_FLOAT32): Define to 1. * manual/math.texi (Mathematics): Document support for _Float32. * math/Makefile (test-types): Add float32. * math/Versions (GLIBC_2.27): Add _Float32 functions. * stdlib/Versions (GLIBC_2.27): Likewise. * wcsmbs/Versions (GLIBC_2.27): Likewise. * sysdeps/unix/sysv/linux/aarch64/libc.abilist: Update. * sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/alpha/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/arm/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/hppa/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/i386/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/ia64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/coldfire/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/m680x0/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/microblaze/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/fpu/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/nofpu/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/n32/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/n64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/nios2/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libc-le.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sh/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilepro/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise. * sysdeps/i386/fpu/libm-test-ulps: Likewise. * sysdeps/i386/i686/fpu/multiarch/libm-test-ulps: Likewise. |
|
|
Florian Weimer
|
37ac8e635a | Add references to CVE-2017-17426 | |
|
Rajalakshmi Srinivasaraghavan
|
87235d7006 | Update NEWS to add sinf optimization | |
|
Joseph Myers
|
0d93b7fd7c |
Add _Float64, _Float32x function aliases.
This patch continues filling out TS 18661-3 support by adding *f64 and *f32x function aliases, supporting _Float64 and _Float32x, as aliases for double functions. These types are supported for all glibc configurations. The API corresponds exactly to that for _Float128 and _Float64x. _Float32 aliases to float functions remain to be added in subsequent patches to complete this process (then there are a few miscellaneous functions in TS 18661-3 to implement that aren't simply versions of existing functions for new types). The patch enables the feature in bits/floatn-common.h, adds symbol versions and documentation with updates to ABI baselines, and arranges for the libm functions for the new types to be tested. As with the _Float64x changes there are some x86 ulps updates because of header inlines not used for the new types (and one other change to the non-multiarch libm-test-ulps, which I suppose comes from using a different compiler version / configuration from when it was last regenerated). Tested for x86_64 and x86, and with build-many-glibcs.py, with both GCC 6 and GCC 7. * bits/floatn-common.h (__HAVE_FLOAT64): Define to 1. (__HAVE_FLOAT32X): Likewise. * manual/math.texi (Mathematics): Document support for _Float64 and _Float32x. * math/Makefile (test-types): Add float64 and float32x. * math/Versions (GLIBC_2.27): Add _Float64 and _Float32x functions. * stdlib/Versions (GLIBC_2.27): Likewise. * wcsmbs/Versions (GLIBC_2.27): Likewise. * sysdeps/unix/sysv/linux/aarch64/libc.abilist: Update. * sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/alpha/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/arm/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/hppa/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/i386/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/ia64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/coldfire/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/m680x0/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/microblaze/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/fpu/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/nofpu/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/n32/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/n64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/nios2/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libc-le.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sh/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilepro/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise. * sysdeps/i386/fpu/libm-test-ulps: Likewise. * sysdeps/i386/i686/fpu/multiarch/libm-test-ulps: Likewise. |
|
|
Florian Weimer
|
446d22e91d |
Linux: Implement interfaces for memory protection keys
This adds system call wrappers for pkey_alloc, pkey_free, pkey_mprotect, and x86-64 implementations of pkey_get and pkey_set, which abstract over the PKRU CPU register and hide the actual number of memory protection keys supported by the CPU. pkey_mprotect with a -1 key is implemented using mprotect, so it will work even if the kernel does not support the pkey_mprotect system call. The system call wrapers use unsigned int instead of unsigned long for parameters, so that no special treatment for x32 is needed. The flags argument is currently unused, and the access rights bit mask is limited to two bits by the current PKRU register layout anyway. Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org> |
|
|
Aurelien Jarno
|
15e84c63c0 | Update NEWS to add CVE-2017-15804 entry | |
Juro Bystricky
|
1faaf7035c |
plural.c: improve reproducibility
There is a subtle non-determinism when building glibc. This depends on whether the glibc is built using the distibuted file intl/plural.c or built using the generated file intl/plural.c. These two files (intl/plural.c generated vs. distributed) are slightly different, hence we may end up with slightly different libraries. Originally, having "bison" installed was optional. So if "bison" was not present, we always built libraries with the distributed plural.c. If bison was installed, we *** may have *** replaced the distributed file plural.c with a new plural.c generated from plural.y. if the timestamps triggered this rule: plural.c plural.y $(BISON) $(BISONFLAGS) $@ $^ Given that timestamps are not preserved in GIT repositories, the above rule is not reliable without explicitly touching plural.c or plural.y. In other words, the rule may or may not have fired. In summary: there are two distinct sources of non-determinism: 1. Having "bison" installed or not 2. Having "bison" installed but timestamps poorly defined. This patch fixes this by requiring "bison" being installed and by always generating intl/plural.c from intl/plural.y. (This is achieved by simply removing checked-in intl/plural.c) [BZ #22432] * configure.ac (BISON): Require to be present. * configure: Regenerated. * intl/Makefile (generated): Add plural.c. [$(BISON) != no]: Make code unconditional. (plural.c): Change rule to $(objpfx)plural.c. ($(objpfx)plural.o): Depend on $(objpfx)plural.c. * intl/plural.c: Remove. * manual/install.texi (Tools for Compilation): Document bison as required. * INSTALL: Regenerated. |
|
|
Florian Weimer
|
4bab02240e |
Implement the mlock2 function
Fallback using mlock is provided if the flags argument is zero. Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org> |
|
|
Joseph Myers
|
a23aa5b727 |
Add _Float64x function aliases.
This patch continues filling out TS 18661-3 support by adding *f64x function aliases on platforms with _Float64x support. (It so happens the set of such platforms is exactly the same as the set of platforms with _Float128 support, although on x86_64, x86 and ia32 the _Float64x format is Intel extended rather than binary128.) The API provided corresponds exactly to that provided for _Float128, mostly coming from TS 18661-3. As these functions always alias those for another type (long double, _Float128 or both), __* function names are not provided, as in other cases of alias types. Given the preparation done in previous patches, this one just enables the feature via Makeconfig and bits/floatn.h, adds symbol versions, and updates documentation and ABI baselines. The symbol versions are present unconditionally as GLIBC_2.27 in the relevant Versions files, as it's OK for those to specify versions for functions that may not be present in some configurations; no additional complexity is needed unless in future some configuration gains support for this type that didn't have such support in 2.27. The Makeconfig additions for ia64 and x86 aren't strictly needed, as those configurations also get float64x-alias-fcts definitions from sysdeps/ieee754/float128/Makeconfig, but still seem appropriate given that _Float64x is not _Float128 for those configurations. A libm-test-ulps update for x86 is included. This is because bits/mathinline.h does not have _Float64x support added and for two functions the use of out-of-line functions results in increased ulps (ifloat64x shares ulps with ildouble / ifloat128 as appropriate). Given that we'd like generally to eliminate bits/mathinline.h optimizations, preferring to have such optimizations in GCC instead, it seems reasonable not to add such support there for new types. GCC support for _FloatN / _FloatNx built-in functions is limited, but has been improved in GCC 8, and at some point I hope the full set of libm built-in functions in GCC, and other optimizations with per-floating-type aspects, will be enabled for all _FloatN / _FloatNx types. Tested for x86_64 and x86, and with build-many-glibcs.py, with both GCC 6 and GCC 7. * sysdeps/ia64/Makeconfig (float64x-alias-fcts): New variable. * sysdeps/ieee754/float128/Makeconfig (float64x-alias-fcts): Likewise. * sysdeps/ieee754/ldbl-128/Makeconfig (float64x-alias-fcts): Likewise. * sysdeps/x86/Makeconfig: New file. * bits/floatn-common.h (__HAVE_FLOAT64X): Remove macro. (__HAVE_FLOAT64X_LONG_DOUBLE): Likewise. * bits/floatn.h (__HAVE_FLOAT64X): New macro. (__HAVE_FLOAT64X_LONG_DOUBLE): Likewise. * sysdeps/ia64/bits/floatn.h (__HAVE_FLOAT64X): Likewise. (__HAVE_FLOAT64X_LONG_DOUBLE): Likewise. * sysdeps/ieee754/ldbl-128/bits/floatn.h (__HAVE_FLOAT64X): Likewise. (__HAVE_FLOAT64X_LONG_DOUBLE): Likewise. * sysdeps/mips/ieee754/bits/floatn.h (__HAVE_FLOAT64X): Likewise. (__HAVE_FLOAT64X_LONG_DOUBLE): Likewise. * sysdeps/powerpc/bits/floatn.h (__HAVE_FLOAT64X): Likewise. (__HAVE_FLOAT64X_LONG_DOUBLE): Likewise. * sysdeps/x86/bits/floatn.h (__HAVE_FLOAT64X): Likewise. (__HAVE_FLOAT64X_LONG_DOUBLE): Likewise. * manual/math.texi (Mathematics): Document support for _Float64x. * math/Versions (GLIBC_2.27): Add _Float64x functions. * stdlib/Versions (GLIBC_2.27): Likewise. * wcsmbs/Versions (GLIBC_2.27): Likewise. * sysdeps/unix/sysv/linux/aarch64/libc.abilist: Update. * sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/alpha/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/i386/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/ia64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/n32/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/n64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libc-le.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise. * sysdeps/i386/fpu/libm-test-ulps: Likewise. * sysdeps/i386/i686/fpu/multiarch/libm-test-ulps: Likewise. |
|
|
Florian Weimer
|
59d2cbb1fe |
Linux: Add memfd_create system call wrapper
The system call is somewhat obscure because it is closely related to file descriptor sealing. However, it is also the recommended way to create alias mappings, which is why it has more general use. No emulation is provided. Except for the name of the /proc/self/fd links, it would be possible to implement an approximation using O_TMPFILE and tmpfs, but this does not appear to be worth the added complexity. Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org> Reviewed-by: Christian Brauner <christian.brauner@ubuntu.com> |
|
|
Joseph Myers
|
754034c429 |
Obsolete p_secstodate.
This patch, relative to a tree with <https://sourceware.org/ml/libc-alpha/2017-11/msg00797.html> (pending review) applied, obsoletes p_secstodate, making the underlying function __p_secstodate into a compat symbol not available for new binaries or ports. The calls in ns_print.c (part of incomplete handling of TKEY) are changed to use %lu to print times instead of trying to pretty-print the times any more. Tested for x86_64. * resolv/res_debug.c (p_secstodate): Condition definition on [SHLIB_COMPAT (libresolv, GLIBC_2_0, GLIBC_2_27)]. Define directly as __p_secstodate, and as a compat symbol. Do not use libresolv_hidden_def. * resolv/resolv.h (p_secstodate): Remove macro and function declaration. * resolv/ns_print.c (ns_sprintrrf): Print times with %lu, not using p_secstodate. * include/resolv.h (__p_secstodate): Do not use libresolv_hidden_proto. * resolv/Makefile (tests): Move tst-p_secstodate to .... (tests-internal): ... here. * resolv/tst-p_secstodate.c: Include <shlib-compat.h>. Condition all contents on [TEST_COMPAT (libresolv, GLIBC_2_0, GLIBC_2_27)] and declare and use __p_secstodate and use compat_symbol_reference in that case. [!TEST_COMPAT (libresolv, GLIBC_2_0, GLIBC_2_27)] (do_test): Add implementation returning 77. |
|
Siddhesh Poyarekar
|
a306c790a8 |
Prefer https for Sourceware links
Update all sourceware links to https. The website redirects everything to https anyway so let the web server do a bit less work. The only reference that remains unchanged is the one in the old ChangeLog, since it didn't seem worth changing it. * NEWS: Update sourceware link to https. * configure.ac: Likewise. * crypt/md5test-giant.c: Likewise. * dlfcn/bug-atexit1.c: Likewise. * dlfcn/bug-atexit2.c: Likewise. * localedata/README: Likewise. * malloc/tst-mallocfork.c: Likewise. * manual/install.texi: Likewise. * nptl/tst-pthread-getattr.c: Likewise. * stdio-common/tst-fgets.c: Likewise. * stdio-common/tst-fwrite.c: Likewise. * sunrpc/Makefile: Likewise. * sysdeps/arm/armv7/multiarch/memcpy_impl.S: Likewise. * wcsmbs/tst-mbrtowc2.c: Likewise. * configure: Regenerate. * INSTALL: Regenerate. |
|
|
Florian Weimer
|
34eb41579c |
malloc: Account for all heaps in an arena in malloc_info [BZ #22439]
This commit adds a "subheaps" field to the malloc_info output that shows the number of heaps that were allocated to extend a non-main arena. Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org> |
|
|
Florian Weimer
|
c0a25aa92b |
resolv: More precise checks in res_hnok, res_dnok [BZ #22409] [BZ #22412]
res_hnok rejected some host names used on the Internet, such as www-.example.com. res_hnok and res_dnok failed to perform basic syntax checking on DNS domain names. Also fix res_mailok, res_ownok. |
|
Paul Eggert
|
a159b53fa0 | glob: Fix buffer overflow during GLOB_TILDE unescaping [BZ #22332] | |
|
Florian Weimer
|
914c9994d2 | Update NEWS and ChangeLog for CVE-2017-15671 | |
|
Florian Weimer
|
822f523b29 | Mention Tim Rühsen as the reporter for CVE-2017-15670 | |
|
Paul Eggert
|
c369d66e54 | CVE-2017-15670: glob: Fix one-byte overflow [BZ #22320] | |
|
Joseph Myers
|
81325b12b1 |
Add _Float128 function aliases.
This patch adds support for *f128 function aliases on platforms where long double has the binary128 format (and thus GCC 7 provides the _Float128 type with the same ABI as long double but as a distinct type in terms of C type compatibility). This is the same API as provided in glibc 2.26 for powerpc64le / x86_64 / x86 / ia64 where _Float128 has a different format from long double, with the bulk of the API coming from TS 18661-3. All the functions alias the corresponding long double functions, and __* function names are not provided since those are only needed once for each floating-point format, not more than once for different types with the same format (so for example, -ffinite-math-only maps foof128 to __fool_finite, while type-generic macros end up calling e.g. __issignalingl for _Float128 arguments on such platforms). The preparation for this feature was done in previous patches, so this one just needs to add the relevant makefile and header definitions, and update macro definitions of libm_alias_ldouble_other_r, to turn on the feature, and update documentation and ABI baselines. Tested (a) for x86_64, (b) for aarch64, (c) with build-many-glibcs.py with both GCC 6 and GCC 7. * sysdeps/ieee754/ldbl-128/Makeconfig: New file. * sysdeps/ieee754/ldbl-128/bits/floatn.h: Likewise. * sysdeps/ieee754/ldbl-128/float128-abi.h: Likewise. * sysdeps/generic/libm-alias-ldouble.h: Include <bits/floatn.h>. [__HAVE_FLOAT128 && !__HAVE_DISTINCT_FLOAT128] (libm_alias_ldouble_other_r): Also create _Float128 alias. * sysdeps/ieee754/ldbl-opt/libm-alias-ldouble.h: Include <bits/floatn.h>. [__HAVE_FLOAT128 && !__HAVE_DISTINCT_FLOAT128] (libm_alias_ldouble_other_r): Also create _Float128 alias. * manual/math.texi (Mathematics): Document additional architecture support for _Float128. * sysdeps/unix/sysv/linux/aarch64/libc.abilist: Update. * sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/alpha/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/n32/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/n64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise. |
|
|
Joseph Myers
|
644d38570a |
Remove add-ons mechanism.
glibc has an add-ons mechanism to allow additional software to be integrated into the glibc build. Such add-ons may be within the glibc source tree, or outside it at a path passed to the --enable-add-ons configure option. localedata and crypt were once add-ons, distributed in separate release tarballs, but long since stopped using that mechanism. Linuxthreads was always an add-on. Ports spent some time as an add-on with separate release tarballs, then was first moved into the glibc source tree, then had its sysdeps files moved into the main sysdeps hierarchy so the add-ons mechanism was no longer used. NPTL spent some time as an add-on in the main glibc tree before stopping using the add-on mechanism. libidn used to have separate release tarballs but no longer does so, but still uses the add-ons mechanism within the glibc source tree. Various other software has supported building with the add-ons mechanism at times in the past, but I don't think any is still widely used. Add-ons involve significant, little-used complexity in the glibc build system, and make it hard to understand what the space of possible glibc configurations is. This patch removes the add-ons mechanism. libidn is now built via the Subdirs mechanism to cause any configuration using sysdeps/unix/inet to build libidn; HAVE_LIBIDN (which effectively means shared libraries are available) is now defined via sysdeps/unix/inet/configure. Various references to add-ons around the source tree are removed (in the case of maint.texi, the example list of sysdeps directories is still very out of date). Externally maintained ports should now put their files in the normal sysdeps directory structure rather than being arranged as add-ons; they probably need to change e.g. elf.h anyway, rather than actually being able to work just as a drop-in subtree. Hurd libpthread should be arranged similarly to NPTL, so some files might go in a hurd-pthreads (or similar) top-level directory in glibc, while sysdeps files should go in the normal sysdeps directory structure (possibly in hurd or hurd-pthreads subdirectories, just as there are nptl subdirectories in the sysdeps tree). Tested for x86_64, and with build-many-glibcs.py. * configure.ac (--enable-add-ons): Remove option. (machine): Do not mention add-ons in comment. (LIBC_PRECONFIGURE): Likewise. (add_ons): Remove variable and sanity checks and logic to locate add-ons. (add_ons_automatic): Remove variable. (configured_add_ons): Likewise. (add_ons_sfx): Likewise. (add_ons_pfx): Likewise. (add_on_subdirs): Likewise. (sysnames_add_ons): Likewise. Remove loop over add-ons and consideration of add-ons in Implies handling. (sysdeps_add_ons): Likewise. * configure: Regenerated. * libidn/configure.ac: Remove. * libidn/configure: Likewise. * sysdeps/unix/inet/configure.ac: New file. * sysdeps/unix/inet/configure: New generated file. * sysdeps/unix/inet/Subdirs: Add libidn. * Makeconfig (sysdeps-srcdirs): Remove variable. (+sysdep_dirs): Do not include $(sysdeps-srcdirs). ($(common-objpfx)config.status): Do not depend on add-on files. ($(common-objpfx)shlib-versions.v.i): Do not mention add-ons in comment. (all-subdirs): Do not include $(add-on-subdirs). * Makefile (dist-prepare): Do not use $(sysdeps-add-ons). * config.make.in (add-ons): Remove variable. (add-on-subdirs): Likewise. (sysdeps-add-ons): Likewise. * manual/Makefile (add-chapters): Remove. ($(objpfx)texis): Do not depend on $(add-chapters). (nonexamples): Do not handle $(add-chapters). (examples): Do not handle $(add-ons). (chapters.% top-menu.%): Do not pass '$(add-chapters)' to libc-texinfo.sh. * manual/install.texi (Installation): Do not mention add-ons. (--enable-add-ons): Do not document configure option. * INSTALL: Regenerated. * manual/libc-texinfo.sh: Do not handle $2 add-ons argument. * manual/maint.texi (Hierarchy Conventions): Do not mention add-ons. * scripts/build-many-glibcs.py (Glibc.build_glibc): Do not use --enable-add-ons. * scripts/gen-sorted.awk: Do not handle Subdirs files from add-ons. * scripts/test-installation.pl: Do not handle glibc-compat add-on. * sysdeps/nptl/Makeconfig: Do not mention add-ons in comment. |
|
|
Florian Weimer
|
91e7cf982d | abort: Do not flush stdio streams [BZ #15436] | |
|
Szabolcs Nagy
|
4ea49f4c08 |
New generic powf
without wrapper on aarch64: powf reciprocal-throughput: 4.2x faster powf latency: 2.6x faster old worst-case error: 1.11 ulp new worst-case error: 0.82 ulp aarch64 .text size: -780 bytes aarch64 .rodata size: +144 bytes powf(x,y) is implemented as exp2(y*log2(x)) with the same algorithms that are used in exp2f and log2f, except that the log2f polynomial is larger for extra precision and its output (and exp2f input) may be scaled by a power of 2 (POWF_SCALE) to simplify the argument reduction step of exp2 (possible when efficient round and convert toint operation is available). The special case handling tries to minimize the checks in the hot path. When the input of exp2_inline is checked, int arithmetics is used as that was faster on the tested aarch64 cores. * math/Makefile (type-float-routines): Add e_powf_log2_data. * sysdeps/ieee754/flt-32/e_powf.c: New implementation. * sysdeps/ieee754/flt-32/e_powf_log2_data.c: New file. * sysdeps/ieee754/flt-32/math_config.h (__powf_log2_data): Define. (issignalingf_inline): Likewise. (POWF_LOG2_TABLE_BITS): Likewise. (POWF_LOG2_POLY_ORDER): Likewise. (POWF_SCALE_BITS): Likewise. (POWF_SCALE): Likewise. * sysdeps/i386/fpu/e_powf_log2_data.c: New file. * sysdeps/ia64/fpu/e_powf_log2_data.c: New file. * sysdeps/m68k/m680x0/fpu/e_powf_log2_data.c: New file. |
|
|
Szabolcs Nagy
|
875c76c704 |
New generic log2f
Similar to the new logf: double precision arithmetics and a small lookup table is used. The argument reduction step is the same as in the new logf. without wrapper on aarch64: log2f reciprocal-throughput: 2.3x faster log2f latency: 2.1x faster old worst case error: 1.72 ulp new worst case error: 0.75 ulp aarch64 .text size: -252 bytes aarch64 .rodata size: +244 bytes * math/Makefile (type-float-routines): Add e_log2f_data. * sysdeps/ieee754/flt-32/e_log2f.c: New implementation. * sysdeps/ieee754/flt-32/e_log2f_data.c: New file. * sysdeps/ieee754/flt-32/math_config.h (__log2f_data): Define. (LOG2F_TABLE_BITS, LOG2F_POLY_ORDER): Define. * sysdeps/i386/fpu/e_log2f_data.c: New file. * sysdeps/ia64/fpu/e_log2f_data.c: New file. * sysdeps/m68k/m680x0/fpu/e_log2f_data.c: New file. |
|
|
Szabolcs Nagy
|
bf27d3973d |
New generic logf
without wrapper on aarch64: logf reciprocal-throughput: 2.2x faster logf latency: 1.9x faster old worst case error: 0.89 ulp new worst case error: 0.82 ulp aarch64 .text size: -356 bytes aarch64 .rodata size: +240 bytes Uses double precision arithmetics and a lookup table to allow smaller polynomial and avoid the use of division. Data is in a separate translation unit with fixed layout to prevent the compiler generating suboptimal literal access. Errors are handled inline according to POSIX rules, but this patch keeps the wrapper with SVID compatible error handling. Needs libm-test-ulps adjustment for clogf in non-nearest rounding mode. * math/Makefile (type-float-routines): Add e_logf_data. * sysdeps/ieee754/flt-32/e_logf.c: New implementation. * sysdeps/ieee754/flt-32/e_logf_data.c: New file. * sysdeps/ieee754/flt-32/math_config.h (__logf_data): Define. (LOGF_TABLE_BITS, LOGF_POLY_ORDER): Define. * sysdeps/i386/fpu/e_logf_data.c: New file. * sysdeps/ia64/fpu/e_logf_data.c: New file. * sysdeps/m68k/m680x0/fpu/e_logf_data.c: New file. |
|
|
Szabolcs Nagy
|
72aa623345 |
Optimized generic expf and exp2f with wrappers
Based on new expf and exp2f code from https://github.com/ARM-software/optimized-routines/ with wrapper on aarch64: expf reciprocal-throughput: 2.3x faster expf latency: 1.7x faster without wrapper on aarch64: expf reciprocal-throughput: 3.3x faster expf latency: 1.7x faster without wrapper on aarch64: exp2f reciprocal-throughput: 2.8x faster exp2f latency: 1.3x faster libm.so size on aarch64: .text size: -152 bytes .rodata size: -1740 bytes expf/exp2f worst case nearest rounding error: 0.502 ulp worst case non-nearest rounding error: 1 ulp Error checks are inline and errno setting is in separate tail called functions, but the wrappers are kept in this patch to handle the _LIB_VERSION==_SVID_ case. (So e.g. errno is set twice for expf calls and once for __expf_finite calls on targets where the new code is used.) Double precision arithmetics is used which is expected to be faster on most targets (including soft-float) than using single precision and it is easier to get good precision result with it. Const data is kept in a separate translation unit which complicates maintenance a bit, but is expected to give good code for literal loads on most targets and allows sharing data across expf, exp2f and powf. (This data is disabled on i386, m68k and ia64 which have their own expf, exp2f and powf code.) Some details may need target specific tweaks: - best convert and round to int operation in the arg reduction may be different across targets. - code was optimized on fma target, optimal polynomial eval may be different without fma. - gcc does not always generate good code for fp bit representation access via unions or it may be inherently slow on some targets. The libm-test-ulps will need adjustment because.. - The argument reduction ideally uses nearest rounded rint, but that is not efficient on most targets, so the polynomial can get evaluated on a wider interval in non-nearest rounding mode making 1 ulp errors common in that case. - The polynomial is evaluated such that it may have 1 ulp error on negative tiny inputs with upward rounding. * math/Makefile (type-float-routines): Add math_errf and e_exp2f_data. * sysdeps/aarch64/fpu/math_private.h (TOINT_INTRINSICS): Define. (roundtoint, converttoint): Likewise. * sysdeps/ieee754/flt-32/e_expf.c: New implementation. * sysdeps/ieee754/flt-32/e_exp2f.c: New implementation. * sysdeps/ieee754/flt-32/e_exp2f_data.c: New file. * sysdeps/ieee754/flt-32/math_config.h: New file. * sysdeps/ieee754/flt-32/math_errf.c: New file. * sysdeps/ieee754/flt-32/t_exp2f.h: Remove. * sysdeps/i386/fpu/e_exp2f_data.c: New file. * sysdeps/i386/fpu/math_errf.c: New file. * sysdeps/ia64/fpu/e_exp2f_data.c: New file. * sysdeps/ia64/fpu/math_errf.c: New file. * sysdeps/m68k/m680x0/fpu/e_exp2f_data.c: New file. * sysdeps/m68k/m680x0/fpu/math_errf.c: New file. |
|
|
Joseph Myers
|
ae8372d7e4 |
Add SSE4.1 trunc, truncf (bug 20142).
This patch adds SSE4.1 versions of trunc and truncf, using the roundsd / roundss instructions, similar to the versions of ceil, floor, rint and nearbyint functions we already have. In my testing with the glibc benchtests these are about 30% faster than the C versions for double, 20% faster for float. Tested for x86_64. [BZ #20142] * sysdeps/x86_64/fpu/multiarch/Makefile (libm-sysdep_routines): Add s_trunc-c, s_truncf-c, s_trunc-sse4_1 and s_truncf-sse4_1. * sysdeps/x86_64/fpu/multiarch/s_trunc-c.c: New file. * sysdeps/x86_64/fpu/multiarch/s_trunc-sse4_1.S: Likewise. * sysdeps/x86_64/fpu/multiarch/s_trunc.c: Likewise. * sysdeps/x86_64/fpu/multiarch/s_truncf-c.c: Likewise. * sysdeps/x86_64/fpu/multiarch/s_truncf-sse4_1.S: Likewise. * sysdeps/x86_64/fpu/multiarch/s_truncf.c: Likewise. |
|
|
Joseph Myers
|
5a80d39d0d |
Obsolete pow10 functions.
This patch obsoletes the pow10, pow10f and pow10l functions (makes them into compat symbols, not available for new ports or static linking). The exp10 names for these functions are standardized (in TS 18661-4) and were added in the same glibc version (2.1) as pow10 so source code can change to use them without any loss of portability. Since pow10 is deliberately not provided for _Float128, only exp10, this slightly simplifies moving to the new wrapper templates in the !LIBM_SVID_COMPAT case, by avoiding needing to arrange for pow10, pow10f and pow10l to be defined by those templates. Tested for x86_64, and with build-many-glibcs.py. * manual/math.texi (pow10): Do not document. (pow10f): Likewise. (pow10l): Likewise. * math/bits/mathcalls.h [__USE_GNU] (pow10): Do not declare. * math/bits/math-finite.h [__USE_GNU] (pow10): Likewise. * math/libm-test-exp10.inc (pow10_test): Remove. (do_test): Do not call pow10. * math/w_exp10_compat.c (pow10): Make into compat symbol. [NO_LONG_DOUBLE] (pow10l): Likewise. * math/w_exp10f_compat.c (pow10f): Likewise. * math/w_exp10l_compat.c (pow10l): Likewise. * sysdeps/ia64/fpu/e_exp10.S: Include <shlib-compat.h>. (pow10): Make into compat symbol. * sysdeps/ia64/fpu/e_exp10f.S: Include <shlib-compat.h>. (pow10f): Make into compat symbol. * sysdeps/ia64/fpu/e_exp10l.S: Include <shlib-compat.h>. (pow10l): Make into compat symbol. * sysdeps/ieee754/ldbl-opt/Makefile (libnldbl-calls): Remove pow10. (CFLAGS-nldbl-pow10.c): Remove variable.. * sysdeps/ieee754/ldbl-opt/nldbl-pow10.c: Remove file. * sysdeps/ieee754/ldbl-opt/w_exp10_compat.c (pow10l): Condition on [SHLIB_COMPAT (libm, GLIBC_2_1, GLIBC_2_27)]. * sysdeps/ieee754/ldbl-opt/w_exp10l_compat.c (compat_symbol): Undefine and redefine. (pow10l): Make into compat symbol. * sysdeps/aarch64/libm-test-ulps: Remove pow10 ulps. * sysdeps/alpha/fpu/libm-test-ulps: Likewise. * sysdeps/arm/libm-test-ulps: Likewise. * sysdeps/hppa/fpu/libm-test-ulps: Likewise. * sysdeps/i386/fpu/libm-test-ulps: Likewise. * sysdeps/i386/i686/fpu/multiarch/libm-test-ulps: Likewise. * sysdeps/microblaze/libm-test-ulps: Likewise. * sysdeps/mips/mips32/libm-test-ulps: Likewise. * sysdeps/mips/mips64/libm-test-ulps: Likewise. * sysdeps/nios2/libm-test-ulps: Likewise. * sysdeps/powerpc/fpu/libm-test-ulps: Likewise. * sysdeps/powerpc/nofpu/libm-test-ulps: Likewise. * sysdeps/s390/fpu/libm-test-ulps: Likewise. * sysdeps/sh/libm-test-ulps: Likewise. * sysdeps/sparc/fpu/libm-test-ulps: Likewise. * sysdeps/tile/libm-test-ulps: Likewise. * sysdeps/x86_64/fpu/libm-test-ulps: Likewise. |
|
|
Joseph Myers
|
4fa9b3bfe6 |
Fix mcontext_t sigcontext namespace (bug 21457).
This patch completes the ucontext.h namespace fixes by fixing issues related to the use of struct sigcontext as mcontext_t, and inclusion of <bits/sigcontext.h> even when struct sigcontext is not so used. Inclusion of <bits/sigcontext.h> by <sys/ucontext.h> is removed; the way to get the sigcontext structure is by including <signal.h> (in a context where __USE_MISC is defined); the sysdeps/generic version of sys/ucontext.h keeps the inclusion by necessity, with a comment about how this is not namespace-clean, but the only configuration that used it, MicroBlaze, gets its own version of the header in this patch. Where mcontext_t was typedefed to struct sigcontext, the contents of struct sigcontext are inserted (with appropriate namespace handling to prefix fields with __ when __USE_MISC is not defined); review should check that this has been done correctly in each case, whether the definition of struct sigcontext comes from glibc headers or from the Linux kernel. This changes C++ name mangling on affected architectures (which do not include x86_64/x86). Tested for x86_64, and with build-many-glibcs.py. 2017-08-14 Joseph Myers <joseph@codesourcery.com> [BZ #21457] * sysdeps/arm/sys/ucontext.h: Do not include <bits/sigcontext.h>. * sysdeps/generic/sys/ucontext.h: Add comment about use of struct sigcontext and namespace requirements. * sysdeps/i386/sys/ucontext.h: Do not include <bits/sigcontext.h>. * sysdeps/m68k/sys/ucontext.h: Likewise. * sysdeps/mips/sys/ucontext.h: Likewise. Include <bits/types.h>. * sysdeps/unix/sysv/linux/aarch64/sys/ucontext.h: Do not include <bits/sigcontext.h>. (__ctx): Define earlier. (mcontext_t): Define structure contents rather than using struct sigcontext. * sysdeps/unix/sysv/linux/aarch64/ucontext_i.sym (oEXTENSION): Use __glibc_reserved1 instead of __reserved. * sysdeps/unix/sysv/linux/alpha/sys/ucontext.h: Do not include <bits/sigcontext.h>. (__ctx): Define earlier. (mcontext_t): Define structure contents rather than using struct sigcontext. * sysdeps/unix/sysv/linux/alpha/ucontext-offsets.sym: Use mcontext_t instead of struct sigcontext. * sysdeps/unix/sysv/linux/arm/sys/ucontext.h: Do not include <bits/sigcontext.h>. (__ctx): Define earlier. (mcontext_t): Define structure contents rather than using struct sigcontext. * sysdeps/unix/sysv/linux/hppa/sys/ucontext.h: Do not include <bits/sigcontext.h>. (__ctx): Define earlier. (mcontext_t): Define structure contents rather than using struct sigcontext. * sysdeps/unix/sysv/linux/ia64/makecontext.c (__makecontext): Use mcontext_t instead of struct sigcontext. * sysdeps/unix/sysv/linux/ia64/sigcontext-offsets.sym: Use mcontext_t instead of struct sigcontext. * sysdeps/unix/sysv/linux/ia64/sys/ucontext.h: Do not include <bits/sigcontext.h>. (__ctx): New macro. (struct __ia64_fpreg_mcontext): New type. (mcontext_t): Define structure contents rather than using struct sigcontext. (_SC_GR0_OFFSET): Use mcontext_t instead of struct sigcontext. (uc_sigmask): Define using __ctx. (uc_stack): Likewise. * sysdeps/unix/sysv/linux/ia64/sys/procfs.h: Include <bits/sigcontext.h>. * sysdeps/unix/sysv/linux/ia64/sys/ptrace.h: Likewise. * sysdeps/unix/sysv/linux/m68k/sys/ucontext.h: Do not include <bits/sigcontext.h>. * sysdeps/unix/sysv/linux/microblaze/sys/ucontext.h: New file. * sysdeps/unix/sysv/linux/mips/sys/ucontext.h: Do not include <bits/sigcontext.h>. * sysdeps/unix/sysv/linux/nios2/sys/ucontext.h: Do not include <bits/sigcontext.h>. * sysdeps/unix/sysv/linux/powerpc/sys/ucontext.h: Do not include <bits/sigcontext.h>. * sysdeps/unix/sysv/linux/s390/sys/ucontext.h: Do not include <bits/sigcontext.h>. * sysdeps/unix/sysv/linux/sh/sys/ucontext.h: Do not include <bits/sigcontext.h>. * sysdeps/unix/sysv/linux/sparc/sys/ucontext.h: Do not include <bits/sigcontext.h>. * sysdeps/unix/sysv/linux/tile/sys/ucontext.h: Do not include <bits/sigcontext.h>. (__ctx): Define earlier. (mcontext_t): Define structure contents rather than using struct sigcontext. * sysdeps/unix/sysv/linux/x86/sys/ucontext.h: Do not include <bits/sigcontext.h>. Include <bits/types.h>. * conform/Makefile (test-xfail-XPG42/signal.h/conform): Remove. (test-xfail-XPG42/sys/wait.h/conform): Likewise. (test-xfail-XPG42/ucontext.h/conform): Likewise. (test-xfail-UNIX98/signal.h/conform): Likewise. (test-xfail-UNIX98/sys/wait.h/conform): Likewise. (test-xfail-UNIX98/ucontext.h/conform): Likewise. (test-xfail-XOPEN2K/signal.h/conform): Likewise. (test-xfail-XOPEN2K/sys/wait.h/conform): Likewise. (test-xfail-XOPEN2K/ucontext.h/conform): Likewise. (test-xfail-POSIX2008/signal.h/conform): Likewise. (test-xfail-POSIX2008/sys/wait.h/conform): Likewise. (test-xfail-XOPEN2K8/signal.h/conform): Likewise. (test-xfail-XOPEN2K8/sys/wait.h/conform): Likewise. |
|
|
Florian Weimer
|
ec2c1fcefb |
malloc: Abort on heap corruption, without a backtrace [BZ #21754]
The stack trace printing caused deadlocks and has been itself been targeted by code execution exploits. |
|
|
Joseph Myers
|
813378e9fe |
Obsolete matherr, _LIB_VERSION, libieee.a.
This patch obsoletes support for SVID libm error handling (the system where a user-defined function matherr is called on a libm function error; only enabled if you also set _LIB_VERSION = _SVID_ or _LIB_VERSION = _XOPEN_) and the use of the _LIB_VERSION global variable to control libm error handling. matherr and _LIB_VERSION are made into compat symbols, not supported for new ports or for static linking. The libieee.a object file (which sets _LIB_VERSION = _IEEE_, so disabling errno setting for some functions) is also removed, and all the related definitions are removed from math.h. The manual already recommends against using matherr, and it's already not supported for _Float128 functions (those use new wrappers that don't support matherr, only errno) - this patch means that it becomes possible to e.g. add sinf32 as an alias to sinf without that resulting in undesired matherr support in sinf32 for existing glibc ports. matherr support is not part of any standard supported by glibc (it was removed in XPG4). Because matherr is a function to be defined by the user, of course user programs defining such a function will still continue to link; it just quietly won't be used. If they try to write to the library's copy of _LIB_VERSION to enable SVID error handling, however, they will get a link error (but if they define their own _LIB_VERSION variable, they won't). I expect the most likely case of build failures from this patch to be programs with unconditional cargo-culted uses of -lieee (based on a notion of "I want IEEE floating point", not any actual requirement for that library). Ideally, the new-port-or-static-linking case would use the new wrappers used for _Float128. This is not implemented in this patch, because of the complication of architecture-specific (powerpc32 and sparc) sqrt wrappers that use _LIB_VERSION and __kernel_standard directly. Thus, the old wrappers and __kernel_standard are still built unconditionally, and _LIB_VERSION still exists in static libm. But when the old wrappers and __kernel_standard are built in the non-compat case, _LIB_VERSION and matherr are defined as macros so code to support those features isn't actually built into static libm or new ports' shared libm after this patch. I intend to move to the new wrappers for static libm and new ports in followup patches. I believe the sqrt wrappers for powerpc32 and sparc can reasonably be removed. GCC already optimizes the normal case of sqrt by generating code that uses a hardware instruction and only calls the sqrt function if the argument was negative (if -fno-math-errno, of course, it just uses the hardware instruction without any check for negative argument being needed). Thus those wrappers will only actually get called in the case of negative arguments, which is not a case it makes sense to optimize for. But even without removing the powerpc32 and sparc wrappers it should still be possible to move to the new wrappers for static libm and new ports, just without having those dubious architecture-specific optimizations in static libm. Everything said about matherr equally applies to matherrf and matherrl (IA64-specific, undocumented), except that the structure of IA64 libm means it won't be converted to using the new wrappers (it doesn't use the old ones either, but its own error-handling code instead). As with other tests of compat symbols, I expect test-matherr and test-matherr-2 to need to become appropriately conditional once we have a system for disabling such tests for ports too new to have the relevant symbols. Tested for x86_64 and x86, and with build-many-glibcs.py. * math/math.h [__USE_MISC] (_LIB_VERSION_TYPE): Remove. [__USE_MISC] (_LIB_VERSION): Likewise. [__USE_MISC] (struct exception): Likewise. [__USE_MISC] (matherr): Likewise. [__USE_MISC] (DOMAIN): Likewise. [__USE_MISC] (SING): Likewise. [__USE_MISC] (OVERFLOW): Likewise. [__USE_MISC] (UNDERFLOW): Likewise. [__USE_MISC] (TLOSS): Likewise. [__USE_MISC] (PLOSS): Likewise. [__USE_MISC] (HUGE): Likewise. [__USE_XOPEN] (MAXFLOAT): Define even if [__USE_MISC]. * math/math-svid-compat.h: New file. * conform/linknamespace.pl (@whitelist): Remove matherr, matherrf and matherrl. * include/math.h [!_ISOMAC] (__matherr): Remove. * manual/arith.texi (FP Exceptions): Do not document matherr. * math/Makefile (tests): Change test-matherr to test-matherr-3. (tests-internal): New variable. (install-lib): Do not add libieee.a. (non-lib.a): Likewise. (extra-objs): Do not add libieee.a and ieee-math.o. (CPPFLAGS-s_lib_version.c): Remove variable. ($(objpfx)libieee.a): Remove rule. ($(addprefix $(objpfx), $(tests-internal)): Depend on $(libm). * math/ieee-math.c: Remove. * math/libm-test-support.c (matherr): Remove. * math/test-matherr.c: Use <support/test-driver.c>. Add copyright and license notices. Include <math-svid-compat.h> and <shlib-compat.h>. (matherr): Undefine as macro. Use compat_symbol_reference. (_LIB_VERSION): Likewise. * math/test-matherr-2.c: New file. * math/test-matherr-3.c: Likewise. * sysdeps/generic/math_private.h (__kernel_standard): Remove declaration. (__kernel_standard_f): Likewise. (__kernel_standard_l): Likewise. * sysdeps/ieee754/s_lib_version.c: Do not include <math.h> or <math_private.h>. Include <math-svid-compat.h>. (_LIB_VERSION): Undefine as macro. (_LIB_VERSION_INTERNAL): Always initialize to _POSIX_. Define only if [LIBM_SVID_COMPAT || !defined SHARED]. If [LIBM_SVID_COMPAT], use compat_symbol. * sysdeps/ieee754/s_matherr.c: Do not include <math.h> or <math_private.h>. Include <math-svid-compat.h>. (matherr): Undefine as macro. (__matherr): Define only if [LIBM_SVID_COMPAT]. Use compat_symbol. * sysdeps/ia64/fpu/libm_error.c: Include <math-svid-compat.h>. [_LIBC && LIBM_SVID_COMPAT] (matherrf): Use compat_symbol_reference. [_LIBC && LIBM_SVID_COMPAT] (matherrl): Likewise. [_LIBC && !LIBM_SVID_COMPAT] (matherrf): Define as macro. [_LIBC && !LIBM_SVID_COMPAT] (matherrl): Likewise. * sysdeps/ia64/fpu/libm_support.h: Include <math-svid-compat.h>. (MATHERR_D): Remove declaration. [!_LIBC] (_LIB_VERSION_TYPE): Likewise [!LIBM_BUILD] (_LIB_VERSIONIMF): Likewise. [LIBM_BUILD] (pmatherrf): Likewise. [LIBM_BUILD] (pmatherr): Likewise. [LIBM_BUILD] (pmatherrl): Likewise. (DOMAIN): Likewise. (SING): Likewise. (OVERFLOW): Likewise. (UNDERFLOW): Likewise. (TLOSS): Likewise. (PLOSS): Likewise. * sysdeps/ia64/fpu/s_matherrf.c: Include <math-svid-compat.h>. (__matherrf): Define only if [LIBM_SVID_COMPAT]. Use compat_symbol. * sysdeps/ia64/fpu/s_matherrl.c: Include <math-svid-compat.h>. (__matherrl): Define only if [LIBM_SVID_COMPAT]. Use compat_symbol. * math/lgamma-compat.h: Include <math-svid-compat.h>. * math/w_acos_compat.c: Likewise. * math/w_acosf_compat.c: Likewise. * math/w_acosh_compat.c: Likewise. * math/w_acoshf_compat.c: Likewise. * math/w_acoshl_compat.c: Likewise. * math/w_acosl_compat.c: Likewise. * math/w_asin_compat.c: Likewise. * math/w_asinf_compat.c: Likewise. * math/w_asinl_compat.c: Likewise. * math/w_atan2_compat.c: Likewise. * math/w_atan2f_compat.c: Likewise. * math/w_atan2l_compat.c: Likewise. * math/w_atanh_compat.c: Likewise. * math/w_atanhf_compat.c: Likewise. * math/w_atanhl_compat.c: Likewise. * math/w_cosh_compat.c: Likewise. * math/w_coshf_compat.c: Likewise. * math/w_coshl_compat.c: Likewise. * math/w_exp10_compat.c: Likewise. * math/w_exp10f_compat.c: Likewise. * math/w_exp10l_compat.c: Likewise. * math/w_exp2_compat.c: Likewise. * math/w_exp2f_compat.c: Likewise. * math/w_exp2l_compat.c: Likewise. * math/w_fmod_compat.c: Likewise. * math/w_fmodf_compat.c: Likewise. * math/w_fmodl_compat.c: Likewise. * math/w_hypot_compat.c: Likewise. * math/w_hypotf_compat.c: Likewise. * math/w_hypotl_compat.c: Likewise. * math/w_j0_compat.c: Likewise. * math/w_j0f_compat.c: Likewise. * math/w_j0l_compat.c: Likewise. * math/w_j1_compat.c: Likewise. * math/w_j1f_compat.c: Likewise. * math/w_j1l_compat.c: Likewise. * math/w_jn_compat.c: Likewise. * math/w_jnf_compat.c: Likewise. * math/w_jnl_compat.c: Likewise. * math/w_lgamma_main.c: Likewise. * math/w_lgamma_r_compat.c: Likewise. * math/w_lgammaf_main.c: Likewise. * math/w_lgammaf_r_compat.c: Likewise. * math/w_lgammal_main.c: Likewise. * math/w_lgammal_r_compat.c: Likewise. * math/w_log10_compat.c: Likewise. * math/w_log10f_compat.c: Likewise. * math/w_log10l_compat.c: Likewise. * math/w_log2_compat.c: Likewise. * math/w_log2f_compat.c: Likewise. * math/w_log2l_compat.c: Likewise. * math/w_log_compat.c: Likewise. * math/w_logf_compat.c: Likewise. * math/w_logl_compat.c: Likewise. * math/w_pow_compat.c: Likewise. * math/w_powf_compat.c: Likewise. * math/w_powl_compat.c: Likewise. * math/w_remainder_compat.c: Likewise. * math/w_remainderf_compat.c: Likewise. * math/w_remainderl_compat.c: Likewise. * math/w_scalb_compat.c: Likewise. * math/w_scalbf_compat.c: Likewise. * math/w_scalbl_compat.c: Likewise. * math/w_sinh_compat.c: Likewise. * math/w_sinhf_compat.c: Likewise. * math/w_sinhl_compat.c: Likewise. * math/w_sqrt_compat.c: Likewise. * math/w_sqrtf_compat.c: Likewise. * math/w_sqrtl_compat.c: Likewise. * math/w_tgamma_compat.c: Likewise. * math/w_tgammaf_compat.c: Likewise. * math/w_tgammal_compat.c: Likewise. * sysdeps/ieee754/dbl-64/w_exp_compat.c: Likewise. * sysdeps/ieee754/flt-32/w_expf_compat.c: Likewise. * sysdeps/ieee754/k_standard.c: Likewise. * sysdeps/ieee754/k_standardf.c: Likewise. * sysdeps/ieee754/k_standardl.c: Likewise. * sysdeps/ieee754/ldbl-128/w_expl_compat.c: Likewise. * sysdeps/ieee754/ldbl-128ibm/w_expl_compat.c: Likewise. * sysdeps/ieee754/ldbl-96/w_expl_compat.c: Likewise. * sysdeps/powerpc/powerpc32/power4/fpu/w_sqrt_compat.S: Likewise. * sysdeps/powerpc/powerpc32/power4/fpu/w_sqrtf_compat.S: Likewise. * sysdeps/powerpc/powerpc32/power5/fpu/w_sqrt_compat.S: Likewise. * sysdeps/powerpc/powerpc32/power5/fpu/w_sqrtf_compat.S: Likewise. * sysdeps/sparc/sparc32/fpu/w_sqrt_compat.S: Likewise. * sysdeps/sparc/sparc32/fpu/w_sqrtf_compat.S: Likewise. * sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/w_sqrt_compat-vis3.S: Likewise. * sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/w_sqrtf_compat-vis3.S: Likewise. * sysdeps/sparc/sparc32/sparcv9/fpu/w_sqrt_compat.S: Likewise. * sysdeps/sparc/sparc32/sparcv9/fpu/w_sqrtf_compat.S: Likewise. * sysdeps/sparc/sparc64/fpu/w_sqrt_compat.S: Likewise. * sysdeps/sparc/sparc64/fpu/w_sqrtf_compat.S: Likewise. |
|
|
H.J. Lu
|
87e7bf4d36 |
Remove "[Add new features here]" for 2.27
* NEWS: Remove "[Add new features here]" for 2.27. |
|
|
H.J. Lu
|
20c7b195d0 |
Mention x86-64 FMA optimization in NEWS
* NEWS: Mention x86-64 FMA optimization. |
|
|
Florian Weimer
|
403143e1df | Add ChangeLog reference to bug 16750/CVE-2009-5064 | |
|
Dmitry V. Levin
|
60e2846e26 |
sys/ptrace.h: remove obsolete Linux PTRACE_SEIZE_DEVEL constant [BZ #21928]
Remove enum __ptrace_flags along with the only constant it contains, PTRACE_SEIZE_DEVEL, from Linux's sys/ptrace.h files. This temporary development constant shouldn't have been added to sys/ptrace.h in the first place. It was introduced in Linux by commit v3.1-rc1~308^2~28 as a temporary part of new experimental PTRACE_SEIZE interface. Later, as PTRACE_SEIZE stabilized and lost its experimental status, this flag was removed from Linux by commit v3.4-rc1~109^2~20. * sysdeps/unix/sysv/linux/sys/ptrace.h (enum __ptrace_flags, PTRACE_SEIZE_DEVEL): Remove. * sysdeps/unix/sysv/linux/aarch64/sys/ptrace.h: Likewise. * sysdeps/unix/sysv/linux/ia64/sys/ptrace.h: Likewise. * sysdeps/unix/sysv/linux/powerpc/sys/ptrace.h: Likewise. * sysdeps/unix/sysv/linux/s390/sys/ptrace.h: Likewise. * sysdeps/unix/sysv/linux/sparc/sys/ptrace.h: Likewise. |
|
|
Siddhesh Poyarekar
|
00cdcf5a41 | Open master for development | |
|
Siddhesh Poyarekar
|
e061bd1771 | Add list of bugs fixed in 2.26 | |
|
Siddhesh Poyarekar
|
e1113af30d | Update NEWS | |
Mike FABIAN
|
a0e5259830 | Mention in NEWS that the Unicode 10.0.0 update causes user visible changes | |
DJ Delorie
|
d5c3fafc43 |
Add per-thread cache to malloc
* config.make.in: Enable experimental malloc option. * configure.ac: Likewise. * configure: Regenerate. * manual/install.texi: Document it. * INSTALL: Regenerate. * malloc/Makefile: Likewise. * malloc/malloc.c: Add per-thread cache (tcache). (tcache_put): New. (tcache_get): New. (tcache_thread_freeres): New. (tcache_init): New. (__libc_malloc): Use cached chunks if available. (__libc_free): Initialize tcache if needed. (__libc_realloc): Likewise. (__libc_calloc): Likewise. (_int_malloc): Prefill tcache when appropriate. (_int_free): Likewise. (do_set_tcache_max): New. (do_set_tcache_count): New. (do_set_tcache_unsorted_limit): New. * manual/probes.texi: Document new probes. * malloc/arena.c: Add new tcache tunables. * elf/dl-tunables.list: Likewise. * manual/tunables.texi: Document them. * NEWS: Mention the per-thread cache. |
|
|
Joseph Myers
|
8d6cba414a | Edit and shorten float128 NEWS item. | |
|
Joseph Myers
|
7e368000c0 | Consistently say "GNU C Library" in NEWS, not "glibc". | |
|
Zack Weinberg
|
2b2ccd0c63 | Reorganize and revise NEWS for 2.26. | |
|
Florian Weimer
|
aef16cc8a4 |
resolv: Automatically reload a changed /etc/resolv.conf file [BZ #984]
This commit enhances the stub resolver to reload the configuration in the per-thread _res object if the /etc/resolv.conf file has changed. The resolver checks whether the application has modified _res and will not overwrite the _res object in that case. The struct resolv_context mechanism is used to check the configuration file only once per name lookup. |
|
|
Florian Weimer
|
3f853f22c8 |
resolv: Lift domain search list limits [BZ #19569] [BZ #21475]
This change uses the extended resolver state in struct resolv_conf to store the search list. If applications have not patched the _res object directly, this extended search list will be used by the stub resolver during name resolution. |
|
|
Florian Weimer
|
6781d8e693 | resolv: Turn _res_opcodes into a compatibility symbol | |
|
Florian Weimer
|
5b757a51b5 |
resolv: Make RES_ROTATE start with a random name server [BZ #19570]
Do not copy the actual name server addresses to rotate them. Use a global rotation offset instead. |
|
|
Joseph Myers
|
e78dc67889 |
SPARC sys/ucontext.h namespace fixes (bug 21457).
This patch fixes various miscellaneous namespace issues in the SPARC sys/ucontext.h header. These are similar to changes made previous to other sys/ucontext.h headers, where the SPARC header was excluded from those previous patches because of its complexity. Tested for SPARC with build-many-glibcs.py. [BZ #21457] * sysdeps/unix/sysv/linux/sparc/sys/ucontext.h (__ctx): New macro. [__WORDSIZE == 64] (MC_TSTATE): Define only for [__USE_MISC]. [__WORDSIZE == 64] (MC_PC): Likewise. [__WORDSIZE == 64] (MC_NPC): Likewise. [__WORDSIZE == 64] (MC_Y): Likewise. [__WORDSIZE == 64] (MC_G1): Likewise. [__WORDSIZE == 64] (MC_G2): Likewise. [__WORDSIZE == 64] (MC_G3): Likewise. [__WORDSIZE == 64] (MC_G4): Likewise. [__WORDSIZE == 64] (MC_G5): Likewise. [__WORDSIZE == 64] (MC_G6): Likewise. [__WORDSIZE == 64] (MC_G7): Likewise. [__WORDSIZE == 64] (MC_O0): Likewise. [__WORDSIZE == 64] (MC_O1): Likewise. [__WORDSIZE == 64] (MC_O2): Likewise. [__WORDSIZE == 64] (MC_O3): Likewise. [__WORDSIZE == 64] (MC_O4): Likewise. [__WORDSIZE == 64] (MC_O5): Likewise. [__WORDSIZE == 64] (MC_O6): Likewise. [__WORDSIZE == 64] (MC_O7): Likewise. [__WORDSIZE == 64] (MC_NGREG): Rename to __MC_NGREG and define to __MC_NGREG if [__USE_MISC]. [__WORDSIZE == 64] (MC_MAXFPQ): Define only for [__USE_MISC]. [__WORDSIZE == 64] (mc_gregset_t): Define using __MC_NGREG. [__WORDSIZE == 64] (struct mc_fq): Rename to struct __mc_fq. Define fields using __ctx. [__WORDSIZE == 64] (mc_fpu_t): Remove struct tag. Define fields using __ctx. [__WORDSIZE == 64] (mcontext_t): Define fields using __ctx. (REG_PSR): Define only for [__USE_MISC]. (REG_PC): Likewise. (REG_nPC): Likewise. (REG_Y): Likewise. (REG_G1): Likewise. (REG_G2): Likewise. (REG_G3): Likewise. (REG_G4): Likewise. (REG_G5): Likewise. (REG_G6): Likewise. (REG_G7): Likewise. (REG_O0): Likewise. (REG_O1): Likewise. (REG_O2): Likewise. (REG_O3): Likewise. (REG_O4): Likewise. (REG_O5): Likewise. (REG_O6): Likewise. (REG_O7): Likewise. [__WORDSIZE == 64] (REG_ASI): Define only for [__USE_MISC]. [__WORDSIZE == 64] (REG_FPRS): Likewise. (NGREG): Rename to __NGREG and define to __NGREG if [__USE_MISC]. (gregset_t): Define using __NGREG. (SPARC_MAXREGWINDOW): Rename to __SPARC_MAXREGWINDOW and define to __SPARC_MAXREGWINDOW if [__USE_MISC]. (struct rwindow): Rename to struct __rwindow. Define fields using __ctx. (rw_fp): Define only for [__USE_MISC]. (rw_rtn): Likewise. (gwindows_t): Remove struct tag. Define fields using __ctx and __SPARC_MAXREGWINDOW. (MAXFPQ): Define only for [__USE_MISC]. (struct fpq): Rename to struct __fpq. Define fields using __ctx. (struct fq): Rename to struct __fq. Define fields using __ctx. (FPU_REGS_TYPE): Define only for [__USE_MISC]. (FPU_DREGS_TYPE): Likewise. (V7_FPU_FSR_TYPE): Likewise. (V9_FPU_FSR_TYPE): Likewise. (V9_FPU_FPRS_TYPE): Likewise. [__WORDSIZE == 64] (fpregset_t): Remove struct tag. Define fields using __ctx. [__WORDSIZE != 64] (fpregset_t): Likewise. [__WORDSIZE != 64] (xrs_t): Define fields using __ctx. [__WORDSIZE != 64] (XRS_ID): Define only for [__USE_MISC]. [__WORDSIZE != 64] (mcontext_t): Define fields using __ctx. Rename field filler to __glibc_reserved1. * sysdeps/unix/sysv/linux/sparc/sparc32/ucontext_i.sym (MC_FILLER): Remove. |
|
|
Joseph Myers
|
614d15f932 |
Support _Float128 in tgmath.h.
This patch adds tgmath.h support for _Float128, so eliminating the awkward caveat in NEWS about the type not being supported there. This does inevitably increase the size of macro expansions (which grows particularly fast when you have nested calls to tgmath.h macros), but only when _Float128 is supported and the declarations of _Float128 interfaces are visible; otherwise the expansions are unchanged. Tested for x86_64 and arm. * math/tgmath.h: Include <bits/libc-header-start.h> and <bits/floatn.h>. (__TGMATH_F128): New macro. (__TGMATH_CF128): Likewise. (__TGMATH_UNARY_REAL_ONLY): Use __TGMATH_F128. (__TGMATH_UNARY_REAL_RET_ONLY): Likewise. (__TGMATH_BINARY_FIRST_REAL_ONLY): Likewise. (__TGMATH_BINARY_FIRST_REAL_STD_ONLY): New macro. (__TGMATH_BINARY_REAL_ONLY): Use __TGMATH_F128. (__TGMATH_BINARY_REAL_STD_ONLY): New macro. (__TGMATH_BINARY_REAL_RET_ONLY): Use __TGMATH_F128. (__TGMATH_TERNARY_FIRST_SECOND_REAL_ONLY): Likewise. (__TGMATH_TERNARY_REAL_ONLY): Likewise. (__TGMATH_TERNARY_FIRST_REAL_RET_ONLY): Likewise. (__TGMATH_UNARY_REAL_IMAG): Use __TGMATH_CF128. (__TGMATH_UNARY_IMAG): Use __TGMATH_F128. (__TGMATH_UNARY_REAL_IMAG_RET_REAL): Use __TGMATH_CF128. (__TGMATH_BINARY_REAL_IMAG): Likewise. (nexttoward): Use __TGMATH_BINARY_FIRST_REAL_STD_ONLY. [__USE_MISC] (scalb): Use __TGMATH_BINARY_REAL_STD_ONLY. * math/gen-tgmath-tests.py (Type.init_types): Enable _FloatN and _FloatNx types if the corresponding HUGE_VAL macros are defined. |
|
|
Joseph Myers
|
073e8fa773 |
Require binutils 2.25 or later to build glibc.
This patch implements a requirement of binutils >= 2.25 (up from 2.22) to build glibc. Tests for 2.24 or later on x86_64 and s390 are removed. It was already the case, as indicated by buildbot results, that 2.24 was too old for building tests for 32-bit x86 (produced internal linker errors linking elf/tst-gnu2-tls1mod.so). I don't know if any configure tests for binutils features are obsolete given the increased version requirement. Tested for x86_64. * configure.ac (AS): Require binutils 2.25 or later. (LD): Likewise. * configure: Regenerated. * sysdeps/s390/configure.ac (AS): Remove version check. * sysdeps/s390/configure: Regenerated. * sysdeps/x86_64/configure.ac (AS): Remove version check. * sysdeps/x86_64/configure: Regenerated. * manual/install.texi (Tools for Compilation): Document requirement for binutils 2.25 or later. * INSTALL: Regenerated. |
|
|
Joseph Myers
|
d57cb31910 |
Miscellaneous sys/ucontext.h namespace fixes (bug 21457).
This patch fixes various miscellaneous namespace issues in sys/ucontext.h headers. Some struct tags are removed where the structs also have *_t typedef names, while other struct tags without such names are renamed to start __; the changes are noted in NEWS as they can affect C++ name mangling (although there seems to be little if any external use of these types, at least based on checking codesearch.debian.net). For powerpc, pointers to struct pt_regs (not defined in this header) are changed to point to struct __ctx(pt_regs), so in the __USE_MISC case those struct fields continue to point to the existing struct pt_regs type for maximum compatibility, while when that's a namespace issue they point to a struct __pt_regs type which is always an incomplete struct. Tested for affected architectures with build-many-glibcs.py. [BZ #21457] * sysdeps/unix/sysv/linux/m68k/sys/ucontext.h (fpregset_t): Remove struct tag. * sysdeps/unix/sysv/linux/mips/sys/ucontext.h (fpregset_t): Likewise. * sysdeps/unix/sysv/linux/nios2/sys/ucontext.h (mcontext_t): Likewise. * sysdeps/unix/sysv/linux/powerpc/sys/ucontext.h (pt_regs): Declare struct type with __ctx. [__WORDSIZE != 32] (mcontext_t): Use __ctx with pt_regs struct tag. (ucontext_t) [__WORDSIZE == 32]: Use __ctx with pt_regs struct tag and regs field name. |
|
|
Joseph Myers
|
034e738021 |
Add float128 support for ia64.
This patch enables float128 support for ia64, so that all the configurations where GCC supports _Float128 / __float128 as an ABI-distinct type now have glibc support as well. bits/floatn.h declares the support to be available for GCC 4.4 and later, which is when the libgcc support was added. The removal of sysdeps/ia64/fpu/k_rem_pio2.c is because the generic k_rem_pio2.c defines a function required by the float128 code. Tested (compilation only) with build-many-glibcs.py for ia64 (GCC 6 and GCC 7). Given how long it is since libm-test-ulps has been updated for ia64, I think truncating the file and regenerating it from scratch would be a good idea when doing a regeneration to add float128 ulps. I expect various ia64 libm issues (at least some already filed in Bugzilla) to result in test failures even after ulps regeneration, but hopefully the float128 code will pass tests as it's the same as used on other architectures. * sysdeps/ia64/Implies: Add ieee754/float128. * sysdeps/ia64/bits/floatn.h: New file. * sysdeps/ia64/float128-abi.h: Likewise. * manual/math.texi (Mathematics): Document support for _Float128 on ia64. * sysdeps/ia64/Makefile [$(subdir) = math] (CPPFLAGS): Append to Makefile variable. * sysdeps/ia64/fpu/e_sqrtf128.c: New file. * sysdeps/ia64/fpu/k_rem_pio2.c: Remove file. * sysdeps/ia64/fpu/sfp-machine.h: New file. Based on libgcc. * sysdeps/ia64/math-tests.h: New file. * math/libm-test-support.h (XFAIL_FLOAT128_PAYLOAD): Also define based on TEST_COND_binary128 for [__ia64__]. * sysdeps/unix/sysv/linux/ia64/libc.abilist: Update. * sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise, |
|
|
Joseph Myers
|
251287734e |
Rename struct ucontext tag (bug 21457).
The ucontext_t type has a tag struct ucontext. As with previous such issues for siginfo_t and stack_t, this tag is not permitted by POSIX (is not in a reserved namespace), and so namespace conformance means breaking C++ name mangling for this type. In this case, the type does need to have some tag rather than just a typedef name, because it includes a pointer to itself. This patch uses struct ucontext_t as the new tag, so the type is mangled as ucontext_t (the POSIX *_t reservation applies in all namespaces, not just the namespace of ordinary identifiers). Another reserved name such as struct __ucontext could of course be used. Because of other namespace issues, this patch does not by itself fix bug 21457 or allow any XFAILs to be removed. Tested for x86_64, and with build-many-glibcs.py. [BZ #21457] * sysdeps/arm/sys/ucontext.h (struct ucontext): Rename to struct ucontext_t. * sysdeps/generic/sys/ucontext.h (struct ucontext): Likewise. * sysdeps/i386/sys/ucontext.h (struct ucontext): Likewise. * sysdeps/m68k/sys/ucontext.h (struct ucontext): Likewise. * sysdeps/mips/sys/ucontext.h (struct ucontext): Likewise. * sysdeps/unix/sysv/linux/aarch64/sys/ucontext.h (struct ucontext): Likewise. * sysdeps/unix/sysv/linux/alpha/sys/ucontext.h (struct ucontext): Likewise. * sysdeps/unix/sysv/linux/arm/sys/ucontext.h (struct ucontext): Likewise. * sysdeps/unix/sysv/linux/hppa/sys/ucontext.h (struct ucontext): Likewise. * sysdeps/unix/sysv/linux/ia64/sys/ucontext.h (struct ucontext): Likewise. * sysdeps/unix/sysv/linux/m68k/sys/ucontext.h (struct ucontext): Likewise. * sysdeps/unix/sysv/linux/mips/sys/ucontext.h (struct ucontext): Likewise. * sysdeps/unix/sysv/linux/nios2/sys/ucontext.h (struct ucontext): Likewise. * sysdeps/unix/sysv/linux/powerpc/sys/ucontext.h (struct ucontext): Likewise. * sysdeps/unix/sysv/linux/s390/sys/ucontext.h (struct ucontext): Likewise. * sysdeps/unix/sysv/linux/sh/sys/ucontext.h (struct ucontext): Likewise. * sysdeps/unix/sysv/linux/sparc/sys/ucontext.h (struct ucontext): Likewise. * sysdeps/unix/sysv/linux/tile/sys/ucontext.h (struct ucontext): Likewise. * sysdeps/unix/sysv/linux/x86/sys/ucontext.h (struct ucontext): Likewise. * sysdeps/powerpc/powerpc32/backtrace.c (struct rt_signal_frame_32): Likewise. * sysdeps/powerpc/powerpc64/backtrace.c (struct signal_frame_64): Likewise. * sysdeps/unix/sysv/linux/aarch64/kernel_rt_sigframe.h (struct kernel_rt_sigframe): Likewise. * sysdeps/unix/sysv/linux/aarch64/sigcontextinfo.h (SIGCONTEXT): Likewise. * sysdeps/unix/sysv/linux/arm/register-dump.h (register_dump): Likewise. * sysdeps/unix/sysv/linux/arm/sigcontextinfo.h (SIGCONTEXT): Likewise. * sysdeps/unix/sysv/linux/hppa/profil-counter.h (__profil_counter): Likewise. * sysdeps/unix/sysv/linux/microblaze/sigcontextinfo.h (SIGCONTEXT): Likewise. * sysdeps/unix/sysv/linux/mips/kernel_rt_sigframe.h (struct kernel_rt_sigframe): Likewise. * sysdeps/unix/sysv/linux/nios2/kernel_rt_sigframe.h (struct kernel_rt_sigframe): Likewise. * sysdeps/unix/sysv/linux/nios2/sigcontextinfo.h (SIGCONTEXT): Likewise. * sysdeps/unix/sysv/linux/sh/makecontext.S (__makecontext): Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/makecontext.c (__start_context): Likewise. * sysdeps/unix/sysv/linux/tile/sigcontextinfo.h (SIGCONTEXT): Likewise. * sysdeps/unix/sysv/linux/x86_64/register-dump.h (register_dump): Likewise. * sysdeps/unix/sysv/linux/x86_64/sigcontextinfo.h (SIGCONTEXT): Likewise. |
|
|
Joseph Myers
|
c86ed71d63 |
Add float128 support for x86_64, x86.
This patch enables float128 support for x86_64 and x86. All GCC versions that can build glibc provide the required support, but since GCC 6 and before don't provide __builtin_nanq / __builtin_nansq, sNaN tests and some tests of NaN payloads need to be disabled with such compilers (this does not affect the generated glibc binaries at all, just the tests). bits/floatn.h declares float128 support to be available for GCC versions that provide the required libgcc support (4.3 for x86_64, 4.4 for i386 GNU/Linux, 4.5 for i386 GNU/Hurd); compilation-only support was present some time before then, but not really useful without the libgcc functions. fenv_private.h needed updating to avoid trying to put _Float128 values in registers. I make no assertion of optimality of the math_opt_barrier / math_force_eval definitions for this case; they are simply intended to be sufficient to work correctly. Tested for x86_64 and x86, with GCC 7 and GCC 6. (Testing for x32 was compilation tests only with build-many-glibcs.py to verify the ABI baseline updates. I have not done any testing for Hurd, although the float128 support is enabled there as for GNU/Linux.) * sysdeps/i386/Implies: Add ieee754/float128. * sysdeps/x86_64/Implies: Likewise. * sysdeps/x86/bits/floatn.h: New file. * sysdeps/x86/float128-abi.h: Likewise. * manual/math.texi (Mathematics): Document support for _Float128 on x86_64 and x86. * sysdeps/i386/fpu/fenv_private.h: Include <bits/floatn.h>. (math_opt_barrier): Do not put _Float128 values in floating-point registers. (math_force_eval): Likewise. [__x86_64__] (SET_RESTORE_ROUNDF128): New macro. * sysdeps/x86/fpu/Makefile [$(subdir) = math] (CPPFLAGS): Append to Makefile variable. * sysdeps/x86/fpu/e_sqrtf128.c: New file. * sysdeps/x86/fpu/sfp-machine.h: Likewise. Based on libgcc. * sysdeps/x86/math-tests.h: New file. * math/libm-test-support.h (XFAIL_FLOAT128_PAYLOAD): New macro. * math/libm-test-getpayload.inc (getpayload_test_data): Use XFAIL_FLOAT128_PAYLOAD. * math/libm-test-setpayload.inc (setpayload_test_data): Likewise. * math/libm-test-totalorder.inc (totalorder_test_data): Likewise. * math/libm-test-totalordermag.inc (totalordermag_test_data): Likewise. * sysdeps/unix/sysv/linux/i386/libc.abilist: Update. * sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise. * sysdeps/i386/fpu/libm-test-ulps: Likewise. * sysdeps/i386/i686/fpu/multiarch/libm-test-ulps: Likewise. * sysdeps/x86_64/fpu/libm-test-ulps: Likewise. |
|
Paul E. Murphy
|
f819dbea0a |
powerpc64le: Enable float128
This patch adds ULPs for the float128 type, updates the abilist for libc and libm, and adds the files bits/floatn.h and float128-abi.h, in order to enable the new type for powerpc64le. This patch also adds the implementation of sqrtf128 for powerpc64le, since it is not implemented in libgcc. The sfp-machine.h header is taken from libgcc. Tested for powerpc64le (GCC 6.2 and GCC 7.1), powerpc64 and s390x. * manual/math.texi (Mathematics): Mention the enabling of float128 for powerpc64le. * sysdeps/powerpc/bits/floatn.h: New file. * sysdeps/powerpc/fpu/libm-test-ulps: Regenerated. * sysdeps/powerpc/fpu/math_private.h: (__ieee754_sqrtf128): New inline override. * sysdeps/powerpc/powerpc64le/Implies-before: New file. * sysdeps/powerpc/powerpc64le/Makefile: New file. * sysdeps/powerpc/powerpc64le/fpu/e_sqrtf128.c: New file. * sysdeps/powerpc/powerpc64le/fpu/sfp-machine.h: New file. * sysdeps/powerpc/powerpc64le/power9/fpu/e_sqrtf128.c: New file. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libc-le.abilist: Updated. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64le/float128-abi.h: New file. |
|
|
Mike FABIAN
|
925fac7793 |
Bug 21533: Update to Unicode 10.0.0
* Unicode 10.0.0 Support: Character encoding, character type info, and transliteration tables are all updated to Unicode 10.0.0, using generator scripts contributed by Mike FABIAN (Red Hat). |
|
|
Zack Weinberg
|
8082d91e1c |
Factor out shared definitions from bits/signum.h.
Many of the things defined by bits/signum.h are invariant across all supported operating systems. This patch factors out all of them to a new header bits/signum-generic.h, which each bits/signum.h will include and then override whichever things need adjustment. Normally that will mean, at most, adding or changing a few signal numbers. A user-visible side effect is that the obsolete signal constant SIGUNUSED (which is an alias for SIGSYS on all platforms that define it) is no longer exposed by any version of bits/signum.h. A side effect only relevant to glibc hackers is that _NSIG is now defined in terms of __SIGRTMAX, instead of the other way around. This is because __SIGRTMAX varies from platform to platform, but _NSIG==__SIGRTMAX+1 is true universally. If your platform doesn't support realtime signals, leave __SIGRTMAX equal to __SIGRTMIN. I also added a Linux-specific test to make sure that our signal constants match the ones in <asm/signal.h>, since we can't use that header (it's not even vaguely namespace-clean). * bits/signum-generic.h: Renamed from bits/signum.h. Add proper multiple include guard and misuse check. Define __SIGRTMIN = __SIGRTMAX = 32, and define _NSIG = __SIGRTMAX+1. Move definition of SIGIO to "archaic names for compatibility" section. * bits/signum.h: New file which just includes bits/signum-generic.h. * sysdeps/unix/bsd/bits/signum.h * sysdeps/unix/sysv/linux/bits/signum.h * sysdeps/unix/sysv/linux/alpha/bits/signum.h * sysdeps/unix/sysv/linux/hppa/bits/signum.h * sysdeps/unix/sysv/linux/mips/bits/signum.h * sysdeps/unix/sysv/linux/sparc/bits/signum.h Just include <bits/signum-generic.h> and then add or adjust signal constants. Do not define SIGUNUSED, SIGRTMIN, or SIGRTMAX. * signal/Makefile: Install bits/signum-generic.h. * signal/signal.h: Define SIGRTMIN and SIGRTMAX here. * sysdeps/generic/siglist.h: SIGSYS and SIGWINCH are universal. Prefer SIGPOLL to SIGIO. Simplify #ifdeffage. * sysdeps/unix/sysv/linux/tst-signal-numbers.sh: New test. * sysdeps/unix/sysv/linux/Makefile: Run it. |
|
|
Zack Weinberg
|
f0be25b633 |
Rename xlocale.h to bits/types/__locale_t.h.
xlocale.h is already a single-type micro-header, defining struct
__locale_struct and the typedefs __locale_t and locale_t. This patch
brings it into the bits/types/ scheme: there are now
bits/types/__locale_t.h which defines only __locale_struct and
__locale_t, and bits/types/locale_t.h which defines locale_t as well
as the other two. None of *our* headers need __locale_t.h, but it
appears to me that libstdc++ could make use of it.
There are a lot of external uses of xlocale.h, but all the uses I
checked had an autoconf test or equivalent for its existence. It has
never been available from other C libraries, and it has always
contained a comment reading "This file is not standardized, don't rely
on it, it can go away without warning" so I think dropping it is
pretty safe.
I also took the opportunity to clean up comments in various public
header files that still talk about the *_l interfaces as though they
were completely nonstandard. There are a few of them, notably the
strtoX_l and wcstoX_l families, that haven't been standardized, but
the bulk are in POSIX.1-2008.
* locale/xlocale.h: Rename to...
* locale/bits/types/__locale_t.h: ...here. Adjust commentary.
Only define struct __locale_struct and __locale_t, not locale_t.
* locale/bits/types/locale_t.h: New file; define locale_t here.
* locale/Makefile (headers): Update to match.
* include/xlocale.h: Delete wrapper.
* include/bits/types/__locale_t.h: New wrapper.
* include/bits/types/locale_t.h: New wrapper.
* ctype/ctype.h, include/printf.h, include/time.h
* locale/langinfo.h, locale/locale.h, stdlib/monetary.h
* stdlib/stdlib.h, string/string.h, string/strings.h, time/time.h
* wcsmbs/wchar.h, wctype/wctype.h: Use bits/types/locale_t.h.
Correct outdated comments regarding the standardization status of
the functions that take locale_t arguments.
* stdlib/strtod_l.c, stdlib/strtof_l.c, stdlib/strtol_l.c
* stdlib/strtold_l.c, stdlib/strtoul_l.c, stdlib/strtoull_l.c
* sysdeps/ieee754/ldbl-128ibm/strtold_l.c
* sysdeps/ieee754/ldbl-64-128/strtold_l.c
* wcsmbs/wcstod.c, wcsmbs/wcstod_l.c, wcsmbs/wcstof.c
* wcsmbs/wcstof_l.c, wcsmbs/wcstold.c, wcsmbs/wcstold_l.c:
Don't include xlocale.h. If necessary, include locale.h instead.
* stdlib/strtold_l.c: Unconditionally include wchar.h.
|
|
|
Zack Weinberg
|
d8cee557e2 | Mention in NEWS that __(NO|USE)_STRING_INLINES don't do anything anymore. | |
|
Joseph Myers
|
4add86749a |
Require GCC 4.9 or later for building glibc.
This patch makes configure require GCC 4.9 or later for building glibc, and documents that requirement. Requiring GCC 4.9 or later allows use of _Generic (as in tzcode). It would allow <stdatomic.h> and _Atomic to be used as well if desired, although we need to avoid any libatomic dependencies on any platforms. This patch is explicitly the minimum to implement a new version requirement, with any consequent cleanups of conditional code (not in installed headers or files shared with gnulib etc.) to be done separately. Tested for x86_64. * configure.ac (libc_cv_compiler_ok): Require GCC 4.9 or later. * configure: Regenerated. * manual/install.texi (Tools for Compilation): Document requirement for GCC 4.9 or later. * INSTALL: Regenerated. |
|
Stefan Liebler
|
b08a6a0dea |
S390: Sync ptrace.h with kernel. [BZ #21539]
This patch removes PTRACE_GETREGS, PTRACE_SETREGS, PTRACE_GETFPREGS and PTRACE_SETFPREGS as these requests does not exist on s390 kernel. But the kernel has support for PTRACE_SINGLEBLOCK, PTRACE_SECCOMP_GET_FILTER, PTRACE_PEEKUSR_AREA, PTRACE_POKEUSR_AREA, PTRACE_GET_LAST_BREAK, PTRACE_ENABLE_TE, PTRACE_DISABLE_TE and PTRACE_TE_ABORT_RAND. Thus those are defined now. The current kernel s390 specific ptrace.h file also defines PTRACE_PEEKTEXT_AREA, PTRACE_PEEKDATA_AREA, PTRACE_POKETEXT_AREA, PTRACE_POKEDATA_AREA, PTRACE_PEEK_SYSTEM_CALL, PTRACE_POKE_SYSTEM_CALL and PTRACE_PROT, but those requests are not supported. Thus those defines are skipped in glibc ptrace.h. There were old includes of ptrace.h in sysdeps/s390/fpu/fesetenv.c. The ptrace feature isn't used there anymore, thus I removed the includes. Before this patch, <glibc>/sysdeps/unix/sysv/linux/s390/sys/ptrace.h uses ptrace-request 12 for PTRACE_GETREGS, but <kernel>/include/uapi/linux/ptrace.h uses 12 for PTRACE_SINGLEBLOCK. The s390 kernel has never had support for PTRACE_GETREGS! Thus glibc ptrace.h is adjusted to match kernel ptrace.h. The new s390 specific test ensures, that PTRACE_SINGLEBLOCK defined in glibc works as expected. If the kernel would interpret it as PTRACE_GETREGS, then the testcase will not make any progress and will time out. ChangeLog: [BZ #21539] * NEWS: Mention s390 ptrace request changes. * sysdeps/unix/sysv/linux/s390/sys/ptrace.h (PTRACE_GETREGS, PTRACE_SETREGS, PTRACE_GETFPREGS, PTRACE_SETFPREGS): Remove enum constant. (PT_GETREGS, PT_SETREGS, PT_GETFPREGS, T_SETFPREGS): Remove defines. (PTRACE_SINGLEBLOCK): New enum constant. (PT_STEPBLOCK): New define. (PTRACE_PEEKUSR_AREA, PTRACE_POKEUSR_AREA, PTRACE_GET_LAST_BREAK, PTRACE_ENABLE_TE, PTRACE_DISABLE_TE, PTRACE_TE_ABORT_RAND): New enum constant and define. * sysdeps/s390/fpu/fesetenv.c: Remove ptrace.h includes. * sysdeps/unix/sysv/linux/s390/tst-ptrace-singleblock.c: New file. * sysdeps/unix/sysv/linux/s390/Makefile: Add test. |
|
|
Siddhesh Poyarekar
|
2c0b90ab44 |
Enable tunables by default
All of the major architectures are adopting tunables as a way to add tuning to the library, from hwcap_mask for aarch64 to HLE for s390 and ifunc and cache geometry for x86. Given this adoption and the fact that we don't want additional tuning knobs to be added outside of tunables, it makes sense to enable tunables by default using this trivial patch. Smoke tested on x86 to ensure that tunables code was built without specifying it as a configure flag. I have kept it as --enabled and not changed it to --disable since we want to still keep the option of different kinds of front-ends for tunables. * configure.ac(--enable-tunables): Enable by default. * configure: Regenerate. * NEWS: Mention change. * manual/install.texi (enable-tunables): Adjust documentation. * INSTALL: Regenerate. |
|
|
Zack Weinberg
|
fd860eaaa8 |
Remove __need macros from errno.h (__need_Emath, __need_error_t).
This is fairly complicated, not because the users of __need_Emath and __need_error_t have complicated requirements, but because the core changes had a lot of fallout. __need_error_t exists for gnulib compatibility in argz.h and argp.h. error_t itself is a Hurdism, an enum containing all the E-constants, so you can do 'p (error_t) errno' in gdb and get a symbolic value. argz.h and argp.h use it for function return values, and they want to fall back to 'int' when that's not available. There is no reason why these nonstandard headers cannot just go ahead and include all of errno.h; so we do that. __need_Emath is defined only by .S files; what they _really_ need is for errno.h to avoid declaring anything other than the E-constants (e.g. 'extern int __errno_location(void);' is a syntax error in assembly language). This is replaced with a check for __ASSEMBLER__ in errno.h, plus a carefully documented requirement for bits/errno.h not to define anything other than macros. That in turn has the consequence that bits/errno.h must not define errno - fortunately, all live ports use the same definition of errno, so I've moved it to errno.h. The Hurd bits/errno.h must also take care not to define error_t when __ASSEMBLER__ is defined, which involves repeating all of the definitions twice, but it's a generated file so that's okay. * stdlib/errno.h: Remove __need_Emath and __need_error_t logic. Reorganize file. Declare errno here. When __ASSEMBLER__ is defined, don't declare anything other than the E-constants. * include/errno.h: Change conditional for exposing internal declarations to (not _ISOMAC and not __ASSEMBLER__). * bits/errno.h: Remove logic for __need_Emath. Document requirements for a port-specific bits/errno.h. * sysdeps/unix/sysv/linux/bits/errno.h * sysdeps/unix/sysv/linux/alpha/bits/errno.h * sysdeps/unix/sysv/linux/hppa/bits/errno.h * sysdeps/unix/sysv/linux/mips/bits/errno.h * sysdeps/unix/sysv/linux/sparc/bits/errno.h: Add multiple-include guard and check against improper inclusion. Remove __need_Emath logic. Don't declare errno here. Ensure all constants are defined as simple integer literals. Consistent formatting. * sysdeps/mach/hurd/errnos.awk: Likewise. Only define error_t and enum __error_t_codes if __ASSEMBLER__ is not defined. * sysdeps/mach/hurd/bits/errno.h: Regenerate. * argp/argp.h, string/argz.h: Don't define __need_error_t before including errno.h. * sysdeps/i386/i686/fpu/multiarch/s_cosf-sse2.S * sysdeps/i386/i686/fpu/multiarch/s_sincosf-sse2.S * sysdeps/i386/i686/fpu/multiarch/s_sinf-sse2.S * sysdeps/x86_64/fpu/s_cosf.S * sysdeps/x86_64/fpu/s_sincosf.S * sysdeps/x86_64/fpu/s_sinf.S: Just include errno.h; don't define __need_Emath or include bits/errno.h directly. |
|
|
Stefan Liebler
|
12d2dd7060 |
Optimize generic spinlock code and use C11 like atomic macros.
This patch optimizes the generic spinlock code. The type pthread_spinlock_t is a typedef to volatile int on all archs. Passing a volatile pointer to the atomic macros which are not mapped to the C11 atomic builtins can lead to extra stores and loads to stack if such a macro creates a temporary variable by using "__typeof (*(mem)) tmp;". Thus, those macros which are used by spinlock code - atomic_exchange_acquire, atomic_load_relaxed, atomic_compare_exchange_weak - have to be adjusted. According to the comment from Szabolcs Nagy, the type of a cast expression is unqualified (see http://www.open-std.org/jtc1/sc22/wg14/www/docs/dr_423.htm): __typeof ((__typeof (*(mem)) *(mem)) tmp; Thus from spinlock perspective the variable tmp is of type int instead of type volatile int. This patch adjusts those macros in include/atomic.h. With this construct GCC >= 5 omits the extra stores and loads. The atomic macros are replaced by the C11 like atomic macros and thus the code is aligned to it. The pthread_spin_unlock implementation is now using release memory order instead of sequentially consistent memory order. The issue with passed volatile int pointers applies to the C11 like atomic macros as well as the ones used before. I've added a glibc_likely hint to the first atomic exchange in pthread_spin_lock in order to return immediately to the caller if the lock is free. Without the hint, there is an additional jump if the lock is free. I've added the atomic_spin_nop macro within the loop of plain reads. The plain reads are also realized by C11 like atomic_load_relaxed macro. The new define ATOMIC_EXCHANGE_USES_CAS determines if the first try to acquire the spinlock in pthread_spin_lock or pthread_spin_trylock is an exchange or a CAS. This is defined in atomic-machine.h for all architectures. The define SPIN_LOCK_READS_BETWEEN_CMPXCHG is now removed. There is no technical reason for throwing in a CAS every now and then, and so far we have no evidence that it can improve performance. If that would be the case, we have to adjust other spin-waiting loops elsewhere, too! Using a CAS loop without plain reads is not a good idea on many targets and wasn't used by one. Thus there is now no option to do so. Architectures are now using the generic spinlock automatically if they do not provide an own implementation. Thus the pthread_spin_lock.c files in sysdeps folder are deleted. ChangeLog: * NEWS: Mention new spinlock implementation. * include/atomic.h: (__atomic_val_bysize): Cast type to omit volatile qualifier. (atomic_exchange_acq): Likewise. (atomic_load_relaxed): Likewise. (ATOMIC_EXCHANGE_USES_CAS): Check definition. * nptl/pthread_spin_init.c (pthread_spin_init): Use atomic_store_relaxed. * nptl/pthread_spin_lock.c (pthread_spin_lock): Use C11-like atomic macros. * nptl/pthread_spin_trylock.c (pthread_spin_trylock): Likewise. * nptl/pthread_spin_unlock.c (pthread_spin_unlock): Use atomic_store_release. * sysdeps/aarch64/nptl/pthread_spin_lock.c: Delete File. * sysdeps/arm/nptl/pthread_spin_lock.c: Likewise. * sysdeps/hppa/nptl/pthread_spin_lock.c: Likewise. * sysdeps/m68k/nptl/pthread_spin_lock.c: Likewise. * sysdeps/microblaze/nptl/pthread_spin_lock.c: Likewise. * sysdeps/mips/nptl/pthread_spin_lock.c: Likewise. * sysdeps/nios2/nptl/pthread_spin_lock.c: Likewise. * sysdeps/aarch64/atomic-machine.h (ATOMIC_EXCHANGE_USES_CAS): Define. * sysdeps/alpha/atomic-machine.h: Likewise. * sysdeps/arm/atomic-machine.h: Likewise. * sysdeps/i386/atomic-machine.h: Likewise. * sysdeps/ia64/atomic-machine.h: Likewise. * sysdeps/m68k/coldfire/atomic-machine.h: Likewise. * sysdeps/m68k/m680x0/m68020/atomic-machine.h: Likewise. * sysdeps/microblaze/atomic-machine.h: Likewise. * sysdeps/mips/atomic-machine.h: Likewise. * sysdeps/powerpc/powerpc32/atomic-machine.h: Likewise. * sysdeps/powerpc/powerpc64/atomic-machine.h: Likewise. * sysdeps/s390/atomic-machine.h: Likewise. * sysdeps/sparc/sparc32/atomic-machine.h: Likewise. * sysdeps/sparc/sparc32/sparcv9/atomic-machine.h: Likewise. * sysdeps/sparc/sparc64/atomic-machine.h: Likewise. * sysdeps/tile/tilegx/atomic-machine.h: Likewise. * sysdeps/tile/tilepro/atomic-machine.h: Likewise. * sysdeps/unix/sysv/linux/hppa/atomic-machine.h: Likewise. * sysdeps/unix/sysv/linux/m68k/coldfire/atomic-machine.h: Likewise. * sysdeps/unix/sysv/linux/nios2/atomic-machine.h: Likewise. * sysdeps/unix/sysv/linux/sh/atomic-machine.h: Likewise. * sysdeps/x86_64/atomic-machine.h: Likewise. |
|
|
Joseph Myers
|
7553131847 |
Fix struct sigaltstack namespace (bug 21517).
glibc defines the stack_t type with the tag struct sigaltstack. This is not permitted by POSIX; sigaltstack is only reserved with file scope in the namespace of ordinary identifiers, not the tag namespace, and in the case where stack_t is obtained from ucontext.h rather than signal.h, it's not reserved with file scope at all. This patch removes the tag accordingly and updates uses in glibc of struct sigaltstack. This is similar to the removal of the "struct siginfo" tag a few years ago: C++ name mangling changes are an unavoidable consequence. A NEWS item is added to note the changed mangling. There is inevitably some risk of breaking builds of anything that relies on the struct sigaltstack name (though the first few hits I looked at from codesearch.debian.net generally seemed to involve code that could use the stack_t name conditionally, so depending on how they determine the conditionals they may work with glibc not defining the struct tag anyway). Tested for x86_64 and x86, and with build-many-glibcs.py. [BZ #21517] * bits/types/stack_t.h (stack_t): Remove struct tag. * sysdeps/unix/sysv/linux/bits/types/stack_t.h (stack_t): Likewise. * sysdeps/unix/sysv/linux/mips/bits/types/stack_t.h (stack_t): Likewise. * debug/segfault.c (install_handler): Use stack_t instead of struct sigaltstack. * hurd/hurd/signal.h (struct hurd_sigstate): Likewise. * hurd/trampoline.c (_hurd_setup_sighandler): Likewise. * include/signal.h (__sigaltstack): Likwise. * signal/sigaltstack.c (__sigaltstack): Likewise. * signal/signal.h (sigaltstack): Likewise. * sysdeps/mach/hurd/i386/signal-defines.sym (SIGALTSTACK__SS_SP__OFFSET): Likewise. (SIGALTSTACK__SS_SIZE__OFFSET): Likewise. (SIGALTSTACK__SS_FLAGS__OFFSET): Likewise. * sysdeps/mach/hurd/sigaltstack.c (__sigaltstack): Likewise. * sysdeps/mach/hurd/sigstack.c (sigstack): Likewise. * sysdeps/unix/sysv/linux/alpha/sys/procfs.h (struct elf_prstatus): Likewise. * sysdeps/unix/sysv/linux/hppa/____longjmp_chk.c (CHECK_SP): Likewise. * sysdeps/unix/sysv/linux/ia64/sys/procfs.h (struct elf_prstatus): Likewise. * sysdeps/unix/sysv/linux/m68k/____longjmp_chk.c (CHECK_SP): Likewise. * sysdeps/unix/sysv/linux/powerpc/sys/procfs.h (struct elf_prstatus): Likewise. * sysdeps/unix/sysv/linux/sh/sys/procfs.h (struct elf_prstatus): Likewise. * sysdeps/unix/sysv/linux/sys/procfs.h (struct elf_prstatus): Likewise. |
|
|
Adhemerval Zanella
|
52bd938169 |
posix: Implement preadv2 and pwritev2
This patch adds support of preadv2 and pwritev2 which are similar to
preadv/pwritev but with an extra flag argument. As for preadv/pwritev
both interfaces are added a non-standard GNU API.
For default 'posix' implementation trying to emulate the Linux supported
flags is troublesome:
* We can not temporary change the file state of the O_DSYNC and O_SYNC
flags to emulate RWF_{D}SYNC (attempts to change the state of using
fcntl are silently ignored).
* IOCB_HIPRI requires the file opened in O_DIRECT and uses an internal
semantic not provided by any other flag (O_NONBLOCK for instance).
So default sysdeps/posix implementations fails with EOPNOTSUPP for any non
supported flag (which are none currently) calls generic preadv/pwritev.
Basically this implementation supports only preadv2 called as preadv (with
flags sets to 0).
The Linux one uses the preadv2/pwritev2 syscall if defined, otherwise it
call preadv/writev. Instead of using the previous __ASSUME_* to
unconditionally issue the syscall (and avoid building the fallback routine),
it call pread/write if the preadv2/pwritev2 syscalls fails. The idea
is just avoid adding another __ASSUME_* and checking each architecture
on every kernel bump and simplify code conditionals.
Checked on x86_64-linux-gnu and on i686-linux-gnu and a check with
run-built-tests=no on aarch64-linux-gnu, alpha-linux-gnu, arm-linux-gnueabihf,
ia64-linux-gnu, m68k-linux-gnu, microblaze-linux-gnu, mips{64,64n32}-linux-gnu,
nios2-linux-gnu, powerpc{64,64le}-linux-gnu, s390{x}-linux-gnu,
sparc{64,v9}-linux-gnu, tile{gx,pro}-linux-gnu, and sh4-linux-gnu (all using
gcc 6.3).
* NEWS: Add note about pwritev2 and preadv2 inclusion.
* misc/Makefile (routines): Add preadv2, preadv64v2, pwritev2, and
pwritev64v2.
(tests): Add tst-preadvwritev2 and tst-preadvwritev64v2.
* misc/Versions (GLIBC_2.26): Add preadv2, preadv64v2, pwritev2, and
pwritev64v2.
* misc/preadv2.c: New file.
* misc/preadv64v2.c: Likewise.
* misc/pwritev2.c: Likewise.
* misc/pwritev64v2.c: Likewise.
* misc/tst-preadvwritev2.c: Likewise.
* misc/tst-preadvwritev64v2.c: Likewise.
* manual/llio.texi: Add preadv2 and pwritev2 documentation.
* misc/sys/uio.h [__USE_GNU && !__USE_FILE_OFFSET64] (preadv2): New
prototype.
[__USE_GNU && !__USE_FILE_OFFSET64] (pwritev2): Likewise.
[__USE_GNU && __USE_FILE_OFFSET64] (preadv64v2): Likewise.
[__USE_GNU && __USE_FILE_OFFSET64] (pwritev64v2): Likewise.
* misc/tst-preadvwritev-common.c (PREADV): Define if not defined.
(PWRITEV): Likewise.
(do_test_with_offset): Use PREADV and PWRITEV macros and check for
ENOSYS.
* nptl/tst-cancel4.c (tf_pwritev2): New test.
(tf_preadv2): Likewise.
(tf_fsync): Add tf_pwritev2 and tf_preadv2.
* sysdeps/posix/preadv2.c: Likewise.
* sysdeps/posix/preadv64v2.c: Likewise.
* sysdeps/posix/pwritev2.c: Likewise.
* sysdeps/posix/pwritev64v2.c: Likewise.
* sysdeps/unix/sysv/linux/kernel-features.h: Add comment for syscall
support in kernel.
* sysdeps/unix/sysv/linux/preadv2.c: Likewise.
* sysdeps/unix/sysv/linux/preadv64v2.c: Likewise.
* sysdeps/unix/sysv/linux/pwritev2.c: Likewise.
* sysdeps/unix/sysv/linux/pwritev64v2.c: Likewise.
* sysdeps/unix/sysv/linux/preadv.c (preadv): Add libc_hidden_def.
* sysdeps/unix/sysv/linux/preadv64.c (preadv64): Likewise.
* sysdeps/unix/sysv/linux/pwritev.c (pwritev): Likewise.
* sysdeps/unix/sysv/linux/pwritev64.c (pwritev64): Likewise.
* sysdeps/unix/sysv/linux/bits/uio.h: Add supported preadv2/pwritev2
support flags on Linux.
* sysdeps/unix/sysv/linux/aarch64/libc.abilist (GLIBC_2.26): Add
preadv2, preadv64v2, pwritev2, pwritev64v2.
* sysdeps/unix/sysv/linux/alpha/libc.abilist (GLIBC_2.26): Likewise.
* sysdeps/unix/sysv/linux/arm/libc.abilist (GLIBC_2.26): Likewise.
* sysdeps/unix/sysv/linux/hppa/libc.abilist (GLIBC_2.26): Likewise.
* sysdeps/unix/sysv/linux/i386/libc.abilist (GLIBC_2.26): Likewise.
* sysdeps/unix/sysv/linux/ia64/libc.abilist (GLIBC_2.26): Likewise.
* sysdeps/unix/sysv/linux/m68k/coldfire/libc.abilist (GLIBC_2.26):
Likewise.
* sysdeps/unix/sysv/linux/m68k/m680x0/libc.abilist (GLIBC_2.26):
Likewise.
* sysdeps/unix/sysv/linux/microblaze/libc.abilist (GLIBC_2.26):
Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/fpu/libc.abilist (GLIBC_2.26):
Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/nofpu/libc.abilist (GLIBC_2.26):
Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/n32/libc.abilist (GLIBC_2.26):
Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/n64/libc.abilist (GLIBC_2.26):
Likewise.
* sysdeps/unix/sysv/linux/nios2/libc.abilist (GLIBC_2.26): Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libc.abilist
(GLIBC_2.26): Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libc.abilist
(GLIBC_2.26): Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libc.abilist (GLIBC_2.26):
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libc-le.abilist
(GLIBC_2.26): Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/libc.abilist (GLIBC_2.26):
Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/libc.abilist (GLIBC_2.26):
Likewise.
* sysdeps/unix/sysv/linux/sh/libc.abilist (GLIBC_2.26): Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/libc.abilist (GLIBC_2.26):
Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/libc.abilist (GLIBC_2.26):
Likewise.
* sysdeps/sysv/linux/tile/tilegx/tilegx32/libc.abilist (GLIBC_2.26):
Likewise.
* sysdeps/sysv/linux/tile/tilegx/tilegx64/libc.abilist (GLIBC_2.26):
Likewise.
* sysdeps/unix/sysv/linux/tile/tilepro/libc.abilist (GLIBC_2.26):
Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/libc.abilist (GLIBC_2.26):
Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/libc.abilist (GLIBC_2.26):
Likewise.
|
|
Dennis Wölfing
|
2e0bbbfbf9 |
Add reallocarray function
The reallocarray function is an extension from OpenBSD. It is an integer-overflow-safe replacement for realloc(p, X*Y) and malloc(X*Y) (realloc(NULL, X*Y)). It can therefore help in preventing certain security issues in code. This is an updated version of a patch originally submitted by Rüdiger Sonderfeld in May 2014 [1]. Checked on i686-linux-gnu and x86_64-linux-gnu. [1] <https://sourceware.org/ml/libc-alpha/2014-05/msg00481.html>. 2017-05-30 Dennis Wölfing <denniswoelfing@gmx.de> Rüdiger Sonderfeld <ruediger@c-plusplus.de> * include/stdlib.h (__libc_reallocarray): New declaration. * malloc/Makefile (routines): Add reallocarray. (tests): Add tst-reallocarray.c. * malloc/Versions: Add reallocarray and __libc_reallocarray. * malloc/malloc-internal.h (check_mul_overflow_size_t): New inline function. * malloc/malloc.h (reallocarray): New declaration. * stdlib/stdlib.h (reallocarray): Likewise. * malloc/reallocarray.c: New file. * malloc/tst-reallocarray.c: New test file. * manual/memory.texi: Document reallocarray. * sysdeps/unix/sysv/linux/aarch64/libc.abilist: Add reallocarray. * sysdeps/unix/sysv/linux/alpha/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/arm/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/hppa/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/i386/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/ia64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/coldfire/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/m680x0/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/microblaze/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/fpu/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/nofpu/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/n32/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/n64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/nios2/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libc-le.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/sh/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/tilepro/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libc.abilist: Likewise. |
|
|
Zack Weinberg
|
42a844c6a2 |
Remove the bulk of the NaCl port.
The NaCl port has not been actively maintained since before the 2.25 release. The complementary GCC back-end was never contributed to GCC, and we are given to understand that the current NaCl SDK has switched to Clang and therefore cannot be used to build glibc anymore, so we doubt that the port remains useful. This commit simply removes the sysdeps/arm/nacl and sysdeps/nacl directories and the abi-tags entry. Remove the NaCl port. * abi-tags: Remove .*-.*-nacl.* entry. * sysdeps/arm/nacl: Remove directory and contents. * sysdeps/nacl: Likewise. |
|
|
Florian Weimer
|
cd354a3849 |
Remove <sys/ultrasound.h>
This header was once used for constants related to the Gravis Ultrasound sound card. |
|
|
Joseph Myers
|
139ace9575 |
Require Linux kernel 3.2 or later on x86 / x86_64.
As per the recent discussion, this patch implements a requirement for Linux 3.2 or later for x86 and x86_64. This is only the initial change to increase the configured minimum; it's expected that followup patches would deal with associated removal of conditionals that are no longer needed. If we remove the start-up test on the kernel version, of course the NEWS and README text should then be revised (to reflect that this version is just one such that glibc does not intend to include compatibility code for any older kernel version, rather than older kernels necessarily failing to work or glibc necessarily having compatibility code for newer interfaces). The followups would be able to assume presence of getcpu (x86_64), recvmmsg (not always through its own syscall, sometimes only through socketcall), sendmmsg (likewise), /proc/$pid/task/$tid/comm, f_flags from statfs, prlimit64. Tested for x86_64 and x86. * sysdeps/unix/sysv/linux/i386/configure.ac (arch_minimum_kernel): Remove. * sysdeps/unix/sysv/linux/i386/configure: Regenerated. * sysdeps/unix/sysv/linux/x86_64/64/configure.ac (arch_minimum_kernel): Remove. * sysdeps/unix/sysv/linux/x86_64/64/configure: Regenerated. * README: Update statement about Linux kernel requirements. |
|
|
Adhemerval Zanella
|
daeb1fa2e1 |
[BZ 21340] add support for POSIX_SPAWN_SETSID
This patch adds support for the POSIX_SPAWN_SETSID flag. It was recently accepted by the Austin Group: http://austingroupbugs.net/view.php?id=1044 Checked on x86_64 Daurnimator <quae@daurnimator.com> Adhemerval Zanella <adhemerval.zanella@linaro.org> [BZ #21340] * posix/Makefile (tests): Add tst-posix_spawn-setsid to list of tests. * posix/spawn.h: define POSIX_SPAWN_SETSID flag. * posix/spawnattr_setflags.c (ALL_FLAGS): Add POSIX_SPAWN_SETSID to valid flags. * posix/tst-posix_spawn-setsid.c: Add test for POSIX_SPAWN_SETSID. * sysdeps/mach/hurd/spawni.c (__spawni): Implementation of POSIX_SPAWN_SETSID. * sysdeps/posix/spawni.c (__spawni): Likewise. * sysdeps/unix/sysv/linux/spawni.c (__spawni_child): Likewise. * NEWS: Add note about POSIX_SPAWN_SETSID support. |
|
|
Florian Weimer
|
025b33ae84 | malloc: Turn cfree into a compatibility symbol | |
|
Florian Weimer
|
44500cbb25 |
resolv: Remove EDNS fallback [BZ #21369]
EDNS is disabled by default (so there is interoperability issue), and the fallback code is problematic because it prevents an application from obtaining DNSSEC data after a FORMERR response. |
|
|
Florian Weimer
|
e14a27723c |
resolv: Reduce EDNS payload size to 1200 bytes [BZ #21361]
This hardens the stub resolver against fragmentation-based attacks. |
|
|
Florian Weimer
|
e4e794841e | resolv: Remove IQUERY support | |
Egmont Koblinger
|
ea1898dded |
localedata: hu_HU: fix multiple sorting bugs (bug 18934)
Fix the incorrect sorting order of a digraph and its geminated variant,
regression introduced by a faulty fix to bug 13547 in commit
|
|
Thorsten Kukuk
|
1e4d83f6fe |
Deprecate libnsl by default (only shared library will be
build for backward compatibility, no linking possible) and disable building
of libnss_compat, libnss_nis and libnss_nisplus, except --enable-obsolete-nsl
option is given to configure.
* config.h.in: Add LINK_OBSOLETE_NSL.
* config.make.in: Add build-obsolete-nsl.
* configure.ac: Add obsolete-nsl option.
* include/libc-symbols.h: Define libnsl_hidden_nolink_def.
* include/rpcsvc/yp.h: Add missing functions as libnsl_hidden_proto.
* include/rpcsvc/nislib.h: Likewise.
* include/rpcsvc/ypclnt.h: Likewise.
* manual/install.texi: Document --enable-obsolete-nsl.
* nis/Makefile: Build only libnsl by default (add build-obsolete-nsl).
* nis/nis_add.c: Replace libnsl_hidden_def with
libnsl_hidden_nolink_def.
* nis/nis_addmember.c: Likewise.
* nis/nis_call.c: Likewise.
* nis/nis_clone_obj.c: Likewise.
* nis/nis_defaults.c: Likeise.
* nis/nis_domain_of_r.c: Likewise.
* nis/nis_error.c: Likewise.
* nis/nis_file.c: Likewise.
* nis/nis_free.c: Likewise.
* nis_local_names.c: Likewise.
* nis/nis_lookup.c: Likewise.
* nis/nis_modify.c: Likewise.
* nis/nis_print.c: Likewise.
* nis/nis_remove.c: Likewise.
* nis/nis_table.c: Likewise.
* nis/nis_util.c: Likewise.
* nis/nis_xdr.c: Likewise.
* nis/yp_xdr.c: Likewise.
* nis/ypclnt.c: Likewise.
* nis/ypupdate_xdr.c: Likewise.
* nis/nis_checkpoint.c: Add libnsl_hidden_nolink_def to all functions.
* nis/nis_clone_dir.c: Likewise.
* nis/nis_clone_res.c: Likewise.
* nis/nis_creategroup.c: Likewise.
* nis/nis_destroygroup.c: Likewise.
* nis/nis_domain_of.c: Likewise.
* nis/nis_getservlist.c: Likewise.
* nis/nis_ismember.c: Likewise.
* nis/nis_mkdir.c: Likewise.
* nis/nis_ping.c: Likewise.
* nis/nis_print_group_entry.c: Likewise.
* nis/nis_removemember.c: Likewise.
* nis/nis_rmdir.c: Likewise.
* nis/nis_server.c: Likewise.
* nis/nis_subr.c: Likewise.
* nis/nis_verifygroup.c: Likewise.
Signed-off-by: Thorsten Kukuk <kukuk@suse.com>
|
|
|
Thorsten Kukuk
|
6af0e51094 |
If sunrpc code is disabled, rpcsvc header files, rpcgen and
librpcsvc.a should not be installed, too. * sunrpc/Makefile: don't build and install rpcsvc header files, rpcgen and librpcsvc.a by default. Signed-off-by: Thorsten Kukuk <kukuk@suse.com> |
|
|
Mike FABIAN
|
0b38d66a4e |
Bug 20313: Update to Unicode 9.0.0
* Unicode 9.0.0 Support: Character encoding, character type info, and transliteration tables are all updated to Unicode 9.0.0, using generator scripts contributed by Mike FABIAN (Red Hat). |
|
|
Siddhesh Poyarekar
|
58557c2293 | Open master for development | |
|
Siddhesh Poyarekar
|
4e054e6b07 | Add list of bugs fixed in 2.25 | |
|
Siddhesh Poyarekar
|
0cea3587d3 |
Add missing NEWS items
Add NEWS items for the two new pthreads implementations, i.e. the condition variables algorithms and the pthread_rwlock algorithms. |
|
|
Siddhesh Poyarekar
|
099191b1f5 |
Fix typo in NEWS
The ip6-bytestring resolver corresponds to the RES_USEBSTRING flag and not RES_NOIP6DOTINT. Thank you Michael Kerrisk for noticing and pointing it out. |
|
|
Joseph Myers
|
58b587c1f8 |
Update copyright dates not handled by scripts/update-copyrights.
I've updated copyright dates in glibc for 2017. This is the patch for the changes not generated by scripts/update-copyrights and subsequent build / regeneration of generated files. Please remember to include 2017 in the dates for any new files added in future (which means updating any existing uncommitted patches you have that add new files to use the new copyright dates in them). * NEWS: Update copyright dates. * catgets/gencat.c (print_version): Likewise. * csu/version.c (banner): Likewise. * debug/catchsegv.sh: Likewise. * debug/pcprofiledump.c (print_version): Likewise. * debug/xtrace.sh (do_version): Likewise. * elf/ldconfig.c (print_version): Likewise. * elf/ldd.bash.in: Likewise. * elf/pldd.c (print_version): Likewise. * elf/sotruss.sh: Likewise. * elf/sprof.c (print_version): Likewise. * iconv/iconv_prog.c (print_version): Likewise. * iconv/iconvconfig.c (print_version): Likewise. * locale/programs/locale.c (print_version): Likewise. * locale/programs/localedef.c (print_version): Likewise. * login/programs/pt_chown.c (print_version): Likewise. * malloc/memusage.sh (do_version): Likewise. * malloc/memusagestat.c (print_version): Likewise. * malloc/mtrace.pl: Likewise. * manual/libc.texinfo: Likewise. * nptl/version.c (banner): Likewise. * nscd/nscd.c (print_version): Likewise. * nss/getent.c (print_version): Likewise. * nss/makedb.c (print_version): Likewise. * posix/getconf.c (main): Likewise. * scripts/test-installation.pl: Likewise. * sysdeps/unix/sysv/linux/lddlibc4.c (main): Likewise. |
|
|
Joseph Myers
|
bfff8b1bec | Update copyright dates with scripts/update-copyrights. | |
|
Florian Weimer
|
fc82b0a2df |
CVE-2015-5180: resolv: Fix crash with internal QTYPE [BZ #18784]
Also rename T_UNSPEC because an upcoming public header file update will use that name. |
|
|
Siddhesh Poyarekar
|
7715d3ab50 | Add NEWS item for tunables | |
|
Florian Weimer
|
bbe989ee87 | resolv: Deprecate RES_BLAST | |
|
Florian Weimer
|
b76e065991 | resolv: Deprecate the "inet6" option and RES_USE_INET6 [BZ #19582] | |
|
Joseph Myers
|
423c2b9d08 |
Add fromfp functions.
TS 18661-1 defines fromfp functions (fromfp, fromfpx, ufromfp, ufromfpx, and float and long double variants) to convert from floating-point to an integer type with any signedness and any given width up to that of intmax_t, in any of the five IEEE rounding modes (the usual four for binary floating point, plus rounding to nearest with ties rounding away from zero), with control of whether in-range non-integer values should result in the "inexact" exception being raised. This patch implements these functions for glibc. These implementations are (apart from raising exceptions) pure integer implementations; it's entirely possible optimized versions could be devised for some architectures. A common math/fromfp.h header provides various common helper code that can readily be shared between the implementations for different types. For each type, the bulk of the implementation is also shared between the four functions, with wrappers that define UNSIGNED and INEXACT macros appropriately before including the main implementation. As the functions return intmax_t and uintmax_t without math.h being allowed to expose those typedef names, they are declared using __intmax_t and __uintmax_t as obtained from <bits/types.h>. The FP_INT_* rounding direction macros are defined as ascending integers in the order the names are listed in the TS; I see no significant value in allowing architectures to vary the values of them. The libm-test machinery is duly adapted to handle unsigned int arguments, and intmax_t and uintmax_t results. Because each test input is generally tested for four functions, five rounding modes and several different widths, the libm-test.inc additions are very large. Thus, the diffs in the body of this message exclude the libm-test.inc changes, with the full patch being attached gzipped. The bulk of the new tests were generated (expanded from a test input plus rounding results and information about where it lies in the relevant interval between integers, to libm-test tests for all relevant combinations of function, rounding direction and width) by a script that's included in the patch as math/gen-fromfp-tests.py (input data math/gen-fromfp-tests-inputs); as an ad hoc script that's not really expected to be rerun, it's not very polished, but it's at least plausibly useful for adding any further tests for these functions in future. I may split the libm-test tests up by function in future (so both libm-test.inc and auto-libm-test-out are split into separate files, and the tests for each function are also built and run separately), but not for 2.25. For no obvious reason, adding tgmath tests for the new functions resulted in -Wuninitialized errors from test-tgmath.c about the variable i being used uninitialized. Those errors were correct - the variable is read by the frexp version in test-tgmath.c (where real frexp would write through that pointer instead of reading it) - but I don't know why this patch would result in the pre-existing issue being newly detected. The patch initializes the variable to avoid those errors. With these changes, glibc 2.25 should have all the library features from TS 18661-1 other than the functions that round result to narrower type (and constant rounding directions, but I'm considering those mainly a compiler feature not a library one). Tested for x86_64, x86, mips64 and powerpc. * math/bits/mathcalls.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (fromfp): New declaration. [__GLIBC_USE (IEC_60559_BFP_EXT)] (fromfpx): Likewise. [__GLIBC_USE (IEC_60559_BFP_EXT)] (ufromfp): Likewise. [__GLIBC_USE (IEC_60559_BFP_EXT)] (ufromfpx): Likewise. * math/tgmath.h (__TGMATH_TERNARY_FIRST_REAL_RET_ONLY): New macro. [__GLIBC_USE (IEC_60559_BFP_EXT)] (fromfp): Likewise. [__GLIBC_USE (IEC_60559_BFP_EXT)] (ufromfp): Likewise. [__GLIBC_USE (IEC_60559_BFP_EXT)] (fromfpx): Likewise. [__GLIBC_USE (IEC_60559_BFP_EXT)] (ufromfpx): Likewise. * math/math.h: Include <bits/types.h>. [__GLIBC_USE (IEC_60559_BFP_EXT)] (FP_INT_UPWARD): New enum constant and macro. (FP_INT_DOWNWARD): Likewise. (FP_INT_TOWARDZERO): Likewise. (FP_INT_TONEARESTFROMZERO): Likewise. (FP_INT_TONEAREST): Likewise. * math/Versions (fromfp): New libm symbol at version GLIBC_2.25. (fromfpf): Likewise. (fromfpl): Likewise. (ufromfp): Likewise. (ufromfpf): Likewise. (ufromfpl): Likewise. (fromfpx): Likewise. (fromfpxf): Likewise. (fromfpxl): Likewise. (ufromfpx): Likewise. (ufromfpxf): Likewise. (ufromfpxl): Likewise. * math/Makefile (libm-calls): Add s_fromfpF, s_ufromfpF, s_fromfpxF and s_ufromfpxF. * math/gen-fromfp-tests.py: New file. * math/gen-fromfp-tests-inputs: Likewise. * math/libm-test.inc: Include <stdint.h> (check_intmax_t): New function. (check_uintmax_t): Likewise. (struct test_fiu_M_data): New type. (struct test_fiu_U_data): Likewise. (RUN_TEST_fiu_M): New macro. (RUN_TEST_LOOP_fiu_M): Likewise. (RUN_TEST_fiu_U): Likewise. (RUN_TEST_LOOP_fiu_U): Likewise. (fromfp_test_data): New array. (fromfp_test): New function. (fromfpx_test_data): New array. (fromfpx_test): New function. (ufromfp_test_data): New array. (ufromfp_test): New function. (ufromfpx_test_data): New array. (ufromfpx_test): New function. (main): Call fromfp_test, fromfpx_test, ufromfp_test and ufromfpx_test. * math/gen-libm-test.pl (parse_args): Handle u, M and U descriptor characters. * math/test-tgmath-ret.c: Include <stdint.h>. (rm): New variable. (width): Likewise. (CHECK_RET_CONST_TYPE): Take extra arguments and pass them to called function. (CHECK_RET_CONST_FLOAT): Take extra arguments and pass them to CHECK_RET_CONST_TYPE. (CHECK_RET_CONST_DOUBLE): Likewise. (CHECK_RET_CONST_LDOUBLE): Likewise. (CHECK_RET_CONST): Take extra arguments and pass them to calls macros. (fromfp): New CHECK_RET_CONST call. (ufromfp): Likewise. (fromfpx): Likewise. (ufromfpx): Likewise. (do_test): Call check_return_fromfp, check_return_ufromfp, check_return_fromfpx and check_return_ufromfpx. * math/test-tgmath.c: Include <stdint.h> (NCALLS): Increase to 138. (F(compile_test)): Initialize i. Call fromfp functions. (F(fromfp)): New function. (F(fromfpx)): Likewise. (F(ufromfp)): Likewise. (F(ufromfpx)): Likewise. * manual/arith.texi (Rounding Functions): Document FP_INT_UPWARD, FP_INT_DOWNWARD, FP_INT_TOWARDZERO, FP_INT_TONEARESTFROMZERO, FP_INT_TONEAREST, fromfp, fromfpf, fromfpl, ufromfp, ufromfpf, ufromfpl, fromfpx, fromfpxf, fromfpxl, ufromfpx, ufromfpxf and ufromfpxl. * manual/libm-err-tab.pl (@all_functions): Add fromfp, fromfpx, ufromfp and ufromfpx. * math/fromfp.h: New file. * sysdeps/ieee754/dbl-64/s_fromfp.c: Likewise. * sysdeps/ieee754/dbl-64/s_fromfp_main.c: Likewise. * sysdeps/ieee754/dbl-64/s_fromfpx.c: Likewise. * sysdeps/ieee754/dbl-64/s_ufromfp.c: Likewise. * sysdeps/ieee754/dbl-64/s_ufromfpx.c: Likewise. * sysdeps/ieee754/flt-32/s_fromfpf.c: Likewise. * sysdeps/ieee754/flt-32/s_fromfpf_main.c: Likewise. * sysdeps/ieee754/flt-32/s_fromfpxf.c: Likewise. * sysdeps/ieee754/flt-32/s_ufromfpf.c: Likewise. * sysdeps/ieee754/flt-32/s_ufromfpxf.c: Likewise. * sysdeps/ieee754/ldbl-128/s_fromfpl.c: Likewise. * sysdeps/ieee754/ldbl-128/s_fromfpl_main.c: Likewise. * sysdeps/ieee754/ldbl-128/s_fromfpxl.c: Likewise. * sysdeps/ieee754/ldbl-128/s_ufromfpl.c: Likewise. * sysdeps/ieee754/ldbl-128/s_ufromfpxl.c: Likewise. * sysdeps/ieee754/ldbl-128ibm/s_fromfpl.c: Likewise. * sysdeps/ieee754/ldbl-128ibm/s_fromfpl_main.c: Likewise. * sysdeps/ieee754/ldbl-128ibm/s_fromfpxl.c: Likewise. * sysdeps/ieee754/ldbl-128ibm/s_ufromfpl.c: Likewise. * sysdeps/ieee754/ldbl-128ibm/s_ufromfpxl.c: Likewise. * sysdeps/ieee754/ldbl-96/s_fromfpl.c: Likewise. * sysdeps/ieee754/ldbl-96/s_fromfpl_main.c: Likewise. * sysdeps/ieee754/ldbl-96/s_fromfpxl.c: Likewise. * sysdeps/ieee754/ldbl-96/s_ufromfpl.c: Likewise. * sysdeps/ieee754/ldbl-96/s_ufromfpxl.c: Likewise. * sysdeps/ieee754/ldbl-opt/Makefile (libnldbl-calls): Add fromfp, ufromfp, fromfpx and ufromfpx. (CFLAGS-nldbl-fromfp.c): New variable. (CFLAGS-nldbl-fromfpx.c): Likewise. (CFLAGS-nldbl-ufromfp.c): Likewise. (CFLAGS-nldbl-ufromfpx.c): Likewise. * sysdeps/ieee754/ldbl-opt/nldbl-compat.h: Include <stdint.h>. * sysdeps/ieee754/ldbl-opt/nldbl-fromfp.c: New file. * sysdeps/ieee754/ldbl-opt/nldbl-fromfpx.c: Likewise. * sysdeps/ieee754/ldbl-opt/nldbl-ufromfp.c: Likewise. * sysdeps/ieee754/ldbl-opt/nldbl-ufromfpx.c: Likewise. * sysdeps/nacl/libm.abilist: Update. * sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise. |
|
Nick Alcock
|
cecbc7967f | Enable -fstack-protector=* when requested by configure [BZ #7065] | |
|
Joseph Myers
|
a5ac5676be |
Update NEWS feature test macro description of TS 18661-1 support.
The NEWS entry for the feature test macro __STDC_WANT_IEC_60559_BFP_EXT__ describes the state of support for that TS as "most features from that TS are not supported by the GNU C Library". This patch updates it to say "not all features from that TS are supported by the GNU C Library". (The functions not yet supported are the fromfp functions - I'm working on them, but they may not be done before the freeze - and the functions round result to narrower type - which definitely won't be started for 2.25, since they require significant infrastructure work. That's 30 functions, which is less than half the number of functions in the TS, so saying "most" now seems inaccurate.) |
|
|
Joseph Myers
|
41c67149b9 |
Add roundeven, roundevenf, roundevenl.
TS 18661-1 defines roundeven functions that round a floating-point number to the nearest integer, in that floating-point type, with ties rounding to even (whereas the round functions round ties away from zero). As with other such functions, they raise no exceptions apart from "invalid" for signaling NaNs. There was a previous user request for this functionality in glibc in <https://sourceware.org/ml/libc-help/2015-02/msg00005.html>. This patch implements these functions for glibc. The implementations use integer bit-manipulation (or roundeven on the high and low parts, in the IBM long double case). It's possible that there may be faster approaches on some architectures (in particular, on AArch64 the frintn instruction should do exactly what's required); I'll leave it to architecture maintainers or others interested to implement such architecture-specific versions if desired. (Where architectures have instructions to round to nearest integer in the current rounding mode, implementations saving and restoring the rounding mode - and dealing with exceptions if those instructions generate "inexact" - are also possible, though their performance depends on the cost of manipulating exceptions / rounding mode state.) Tested for x86_64, x86, mips64 and powerpc. * math/bits/mathcalls.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (roundeven): New declaration. * math/tgmath.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (roundeven): New macro. * math/Versions (roundeven): New libm symbol at version GLIBC_2.25. (roundevenf): Likewise. (roundevenl): Likewise. * math/Makefile (libm-calls): Add s_roundevenF. * math/libm-test.inc (roundeven_test_data): New array. (roundeven_test): New function. (main): Call roundeven_test. * math/test-tgmath.c (NCALLS): Increase to 134. (F(compile_test)): Call roundeven. (F(roundeven)): New function. * manual/arith.texi (Rounding Functions): Document roundeven, roundevenf and roundevenl. * manual/libm-err-tab.pl (@all_functions): Add roundeven. * include/math.h (roundeven): Use libm_hidden_proto. * sysdeps/ieee754/dbl-64/s_roundeven.c: New file. * sysdeps/ieee754/dbl-64/wordsize-64/s_roundeven.c: Likewise. * sysdeps/ieee754/flt-32/s_roundevenf.c: Likewise. * sysdeps/ieee754/ldbl-128/s_roundevenl.c: Likewise. * sysdeps/ieee754/ldbl-128ibm/s_roundevenl.c: Likewise. * sysdeps/ieee754/ldbl-96/s_roundevenl.c: Likewise. * sysdeps/ieee754/ldbl-opt/Makefile (libnldbl-calls): Add roundeven. (CFLAGS-nldbl-roundeven.c): New variable. * sysdeps/ieee754/ldbl-opt/nldbl-roundeven.c: New file. * sysdeps/nacl/libm.abilist: Update. * sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise. |
|
|
Joseph Myers
|
525f803984 |
Add fmaxmag, fminmag functions.
TS 18661-1 defines fmaxmag and fminmag functions that return the argument with maximum / minimum magnitude (acting like fmax / fmin if the arguments have the same magnitude or either argument is a NaN). These correspond to the IEEE 754-2008 operations maxNumMag and minNumMag. This patch implements these functions for glibc. They are implemented with type-generic templates. Tests are based on those for fmax and fmin. Tested for x86_64, x86, mips64 and powerpc. * math/bits/mathcalls.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (fmaxmag): New declaration. (fminmag): Likewise. * math/tgmath.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (fmaxmag): New macro. [__GLIBC_USE (IEC_60559_BFP_EXT)] (fminmag): Likewise. * math/Versions (fmaxmag): New libm symbol at version GLIBC_2.25. (fmaxmagf): Likewise. (fmaxmagl): Likewise. (fminmag): Likewise. (fminmagf): Likewise. (fminmagl): Likewise. * math/Makefile (gen-libm-calls): Add s_fmaxmagF and s_fminmagF. * math/s_fmaxmag_template.c: New file. * math/s_fminmag_template.c: Likewise. * math/libm-test.inc (fmaxmag_test_data): New array. (fmaxmag_test): New function. (fminmag_test_data): New array. (fminmag_test): New function. (main): Call fmaxmag_test and fminmag_test. * math/test-tgmath.c (NCALLS): Increase to 132. (F(compile_test)): Call fmaxmag and fminmag. (F(fminmag)): New function. (F(fmaxmag)): Likewise. * manual/arith.texi (Misc FP Arithmetic): Document fminmag, fminmagf, fminmagl, fmaxmag, fmaxmagf and fmaxmagl. * manual/libm-err-tab.pl (@all_functions): Add fmaxmag and fminmag. * sysdeps/ieee754/ldbl-opt/nldbl-fmaxmag.c: New file. * sysdeps/ieee754/ldbl-opt/nldbl-fminmag.c: Likewise. * sysdeps/ieee754/ldbl-opt/s_fmaxmagl.c: Likewise. * sysdeps/ieee754/ldbl-opt/s_fminmagl.c: Likewise. * sysdeps/ieee754/ldbl-opt/Makefile (libnldbl-calls): Add fmaxmag and fminmag. (CFLAGS-nldbl-fmaxmag.c): New variable. (CFLAGS-nldbl-fminmag.c): Likewise. * sysdeps/nacl/libm.abilist: Update. * sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise. |
|
|
Zack Weinberg
|
ea1bd74def |
New string function explicit_bzero (from OpenBSD).
explicit_bzero(s, n) is the same as memset(s, 0, n), except that the compiler is not allowed to delete a call to explicit_bzero even if the memory pointed to by 's' is dead after the call. Right now, this effect is achieved externally by having explicit_bzero be a function whose semantics are unknown to the compiler, and internally, with a no-op asm statement that clobbers memory. This does mean that small explicit_bzero operations cannot be expanded inline as small memset operations can, but on the other hand, small memset operations do get deleted by the compiler. Hopefully full compiler support for explicit_bzero will happen relatively soon. There are two new tests: test-explicit_bzero.c verifies the visible semantics in the same way as the existing test-bzero.c, and tst-xbzero-opt.c verifies the not-being-optimized-out property. The latter is conceptually based on a test written by Matthew Dempsky for the OpenBSD regression suite. The crypt() implementation has an immediate use for this new feature. We avoid having to add a GLIBC_PRIVATE alias for explicit_bzero by running all of libcrypt's calls through the fortified variant, __explicit_bzero_chk, which is in the impl namespace anyway. Currently I'm not aware of anything in libc proper that needs this, but the glue is all in place if it does become necessary. The legacy DES implementation wasn't bothering to clear its buffers, so I added that, mostly for consistency's sake. * string/explicit_bzero.c: New routine. * string/test-explicit_bzero.c, string/tst-xbzero-opt.c: New tests. * string/Makefile (routines, strop-tests, tests): Add them. * string/test-memset.c: Add ifdeffage for testing explicit_bzero. * string/string.h [__USE_MISC]: Declare explicit_bzero. * debug/explicit_bzero_chk.c: New routine. * debug/Makefile (routines): Add it. * debug/tst-chk1.c: Test fortification of explicit_bzero. * string/bits/string3.h: Fortify explicit_bzero. * manual/string.texi: Document explicit_bzero. * NEWS: Mention addition of explicit_bzero. * crypt/crypt-entry.c (__crypt_r): Clear key-dependent intermediate data before returning, using explicit_bzero. * crypt/md5-crypt.c (__md5_crypt_r): Likewise. * crypt/sha256-crypt.c (__sha256_crypt_r): Likewise. * crypt/sha512-crypt.c (__sha512_crypt_r): Likewise. * include/string.h: Redirect internal uses of explicit_bzero to __explicit_bzero_chk[_internal]. * string/Versions [GLIBC_2.25]: Add explicit_bzero. * debug/Versions [GLIBC_2.25]: Add __explicit_bzero_chk. * sysdeps/arm/nacl/libc.abilist * sysdeps/unix/sysv/linux/aarch64/libc.abilist * sysdeps/unix/sysv/linux/alpha/libc.abilist * sysdeps/unix/sysv/linux/arm/libc.abilist * sysdeps/unix/sysv/linux/hppa/libc.abilist * sysdeps/unix/sysv/linux/i386/libc.abilist * sysdeps/unix/sysv/linux/ia64/libc.abilist * sysdeps/unix/sysv/linux/m68k/coldfire/libc.abilist * sysdeps/unix/sysv/linux/m68k/m680x0/libc.abilist * sysdeps/unix/sysv/linux/microblaze/libc.abilist * sysdeps/unix/sysv/linux/mips/mips32/fpu/libc.abilist * sysdeps/unix/sysv/linux/mips/mips32/nofpu/libc.abilist * sysdeps/unix/sysv/linux/mips/mips64/n32/libc.abilist * sysdeps/unix/sysv/linux/mips/mips64/n64/libc.abilist * sysdeps/unix/sysv/linux/nios2/libc.abilist * sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libc.abilist * sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libc.abilist * sysdeps/unix/sysv/linux/powerpc/powerpc64/libc-le.abilist * sysdeps/unix/sysv/linux/powerpc/powerpc64/libc.abilist * sysdeps/unix/sysv/linux/s390/s390-32/libc.abilist * sysdeps/unix/sysv/linux/s390/s390-64/libc.abilist * sysdeps/unix/sysv/linux/sh/libc.abilist * sysdeps/unix/sysv/linux/sparc/sparc32/libc.abilist * sysdeps/unix/sysv/linux/sparc/sparc64/libc.abilist * sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libc.abilist * sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libc.abilist * sysdeps/unix/sysv/linux/tile/tilepro/libc.abilist * sysdeps/unix/sysv/linux/x86_64/64/libc.abilist * sysdeps/unix/sysv/linux/x86_64/x32/libc.abilist: Add entries for explicit_bzero and __explicit_bzero_chk. |
|
|
Joseph Myers
|
c0b4353654 |
Define FE_SNANS_ALWAYS_SIGNAL.
TS 18661-1 defines a macro FE_SNANS_ALWAYS_SIGNAL in <fenv.h>, to indicate that the recommended practice regarding sNaNs (that operations always produce a qNaN output with "invalid" exception, even in the fmax / fmin / hypot / pow cases where a qNaN input would not result in qNaN output) is followed. Now that those functions with C99 special cases for NaNs have been fixed not to apply those special cases to sNaN, only to qNaN, glibc follows that recommended practice. This patch makes it define the corresponding macro. Since compiler optimizations may affect whether sNaNs behave as expected and the macro relates to both language and library features, it is only defined if __SUPPORT_SNAN__ is defined (which GCC defines for -fsignaling-nans). It is also not defined if FE_INVALID is undefined, since the recommended practice specifically refers to raising the "invalid" exception, so it seems inappropriate to define the macro for soft-float cases without support for exceptions. (Further refinement would be possible in cases where bits/fenv.h is shared by configurations both with and without exceptions support.) Tested for x86_64 and x86, and also did compile-only testing for nios2 to cover the no-exceptions case. * math/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT) && FE_INVALID && __SUPPORT_SNAN__] (FE_SNANS_ALWAYS_SIGNAL): New macro. * math/test-fe-snans-always-signal.c: New file. * math/Makefile (tests): Add test-fe-snans-always-signal. (CFLAGS-test-fe-snans-always-signal.c): New variable. * manual/arith.texi (Infinity and NaN): Document FE_SNANS_ALWAYS_SIGNAL. |
|
|
Florian Weimer
|
92dcaa3e2f | Add getentropy, getrandom, <sys/random.h> [BZ #17252] | |
|
Zack Weinberg
|
c03073774f |
Make _REENTRANT and _THREAD_SAFE aliases for _POSIX_C_SOURCE=199506L.
For many years, the only effect of these macros has been to make unistd.h declare getlogin_r. _POSIX_C_SOURCE >= 199506L also causes this function to be declared. However, people who don't carefully read all the headers might be confused into thinking they need to define _REENTRANT for any threaded code (as was indeed the case a long time ago). Therefore, remove __USE_REENTRANT, and make _REENTRANT and _THREAD_SAFE into synonyms for _POSIX_C_SOURCE=199506L. This will only affect programs that don't select a higher conformance level some other way. For instance, -std=c89 -D_REENTRANT will see a change in visible declarations, but -std=c99 -D_POSIX_C_SOURCE=200809L -D_REENTRANT won't, and -D_REENTRANT all by itself also won't, because _DEFAULT_SOURCE implies _POSIX_C_SOURCE > 199506. * include/features.h: Remove __USE_REENTRANT. Treat _REENTRANT and _THREAD_SAFE the same as _POSIX_C_SOURCE=199506L, if a higher POSIX conformance level has not been selected by other macros. * NEWS, manual/creature.texi: Document this change. * posix/unistd.h, posix/bits/unistd.h: Don't check __USE_REENTRANT. * include/libc-symbols.h: Don't define _REENTRANT. * scripts/check-installed-headers.sh: Don't undefine _REENTRANT. |
|
Martin Galvan
|
23b5cae1af |
Add pretty printers for the NPTL lock types
This patch adds pretty printers for the following NPTL types: - pthread_mutex_t - pthread_mutexattr_t - pthread_cond_t - pthread_condattr_t - pthread_rwlock_t - pthread_rwlockattr_t To load the pretty printers into your gdb session, do the following: python import sys sys.path.insert(0, '/path/to/glibc/build/nptl/pretty-printers') end source /path/to/glibc/source/pretty-printers/nptl-printers.py You can check which printers are registered and enabled by issuing the 'info pretty-printer' gdb command. Printers should trigger automatically when trying to print a variable of one of the types mentioned above. The printers are architecture-independent, and were tested on an AMD64 running Ubuntu 14.04 and an x86 VM running Fedora 24. In order to work, the printers need to know the values of various flags that are scattered throughout pthread.h and pthreadP.h as enums and #defines. Since replicating these constants in the printers file itself would create a maintenance burden, I wrote a script called gen-py-const.awk that Makerules uses to extract the constants. This script is pretty much the same as gen-as-const.awk, except it doesn't cast the constant values to 'long' and is thorougly documented. The constants need only to be enumerated in a .pysym file, which is then referenced by a Make variable called gen-py-const-headers. As for the install directory, I discussed this with Mike Frysinger and Siddhesh Poyarekar, and we agreed that it can be handled in a separate patch, and shouldn't block merging of this one. In addition, I've written a series of test cases for the pretty printers. Each lock type (mutex, condvar and rwlock) has two test programs, one for itself and other for its related 'attributes' object. Each test program in turn has a PExpect-based Python script that drives gdb and compares its output to the expected printer's. The tests run on the glibc host, which is assumed to have both gdb and PExpect; if either is absent the tests will fail with code 77 (UNSUPPORTED). For cross-testing you should use cross-test-ssh.sh as test-wrapper. I've tested the printers on both native builds and a cross build using a Beaglebone Black running Debian, with the build system's filesystem shared with the board through NFS. Finally, I've written a README that explains all this and more. * INSTALL: Regenerated. * Makeconfig: Add comments and whitespace to make the control flow clearer. (+link-printers-tests, +link-pie-printers-tests, CFLAGS-printers-tests, installed-rtld-LDFLAGS, built-rtld-LDFLAGS, link-libc-rpath, link-libc-tests-after-rpath-link, link-libc-printers-tests): New. (rtld-LDFLAGS, rtld-tests-LDFLAGS, link-libc-tests-rpath-link, link-libc-tests): Use the new variables as required. * Makerules ($(py-const)): New rule. generated: Add $(py-const). * README.pretty-printers: New file. * Rules (tests-printers-programs, tests-printers-out, py-env): New. (others): Depend on $(py-const). (tests): Depend on $(tests-printers-programs) or $(tests-printers-out), as required. Pass $(tests-printers) to merge-test-results.sh. * manual/install.texi: Add requirements for testing the pretty printers. * nptl/Makefile (gen-py-const-headers, pretty-printers, tests-printers, CFLAGS-test-mutexattr-printers.c CFLAGS-test-mutex-printers.c, CFLAGS-test-condattr-printers.c, CFLAGS-test-cond-printers.c, CFLAGS-test-rwlockattr-printers.c CFLAGS-test-rwlock-printers.c, tests-printers-libs): Define. * nptl/nptl-printers.py: New file. * nptl/nptl_lock_constants.pysym: Likewise. * nptl/test-cond-printers.c: Likewise. * nptl/test-cond-printers.py: Likewise. * nptl/test-condattr-printers.c: Likewise. * nptl/test-condattr-printers.py: Likewise. * nptl/test-mutex-printers.c: Likewise. * nptl/test-mutex-printers.py: Likewise. * nptl/test-mutexattr-printers.c: Likewise. * nptl/test-mutexattr-printers.py: Likewise. * nptl/test-rwlock-printers.c: Likewise. * nptl/test-rwlock-printers.py: Likewise. * nptl/test-rwlockattr-printers.c: Likewise. * nptl/test-rwlockattr-printers.py: Likewise. * scripts/gen-py-const.awk: Likewise. * scripts/test_printers_common.py: Likewise. * scripts/test_printers_exceptions.py: Likewise. |
|
|
Joseph Myers
|
55a38f8236 |
Add llogb, llogbf, llogbl.
TS 18661-1 defines llogb functions that are like ilogb except that they return long int instead of int. Corresponding FP_LLOGB* macros are defined, whose values are required to have the obvious correspondence to those of the FP_ILOGB* macros. This patch implements these functions and macros for glibc. llogb uses the type-generic infrastructure, with an implementation similar to the wrapper for ilogb but with additional conversion from FP_ILOGB* to FP_LLOGB*; this approach avoids needing to modify or duplicate any of the architecture-specific ilogb implementations. Tests are also based on those for ilogb. Ideally the llogb functions would alias the ilogb ones when long is 32-bit, but such aliasing requires the associated header declarations of the different-type alias to be hidden, typically by defining macros before including the header (see e.g. how sysdeps/ieee754/dbl-64/wordsize-64/s_llround.c defines lround to __hidden_lround before including <math.h>). The infrastructure for type-generic function implementations does not support defining such macros at present (since C code can't define a macro whose name is determined by other macros). So this patch leaves them as separate functions (similar to e.g. scalbln and scalbn being separate in such a case as well), but with the remapping of FP_ILOGB* to FP_LLOGB* conditioned out in the case where it would be the identity map. Tested for x86_64, x86, mips64 and powerpc. * math/bits/mathcalls.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (llogb): New declaration. * math/tgmath.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (llogb): New macro. * math/math.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (__FP_LONG_MAX): New macro. [__GLIBC_USE (IEC_60559_BFP_EXT)] (FP_LLOGB0): Likewise. [__GLIBC_USE (IEC_60559_BFP_EXT)] (FP_LLOGBNAN): Likewise. * math/Versions (llogb): New libm symbol at version GLIBC_2.25. (llogbf): Likewise. (llogbl): Likewise. * math/Makefile (gen-libm-calls): Add w_llogbF. (tests): Add test-fp-llogb-constants. * math/w_llogb_template.c: New file. Based on math/w_ilogb_template.c. * math/libm-test.inc (llogb_test_data): New array. (llogb_test): New function. (main): Call llogb_test. * math/test-fp-llogb-constants.c: New file. Based on math/test-fp-ilogb-constants.c. * math/test-tgmath-ret.c (llogb): New CHECK_RET_CONST call. (do_test): Call check_return_llogb. * math/test-tgmath.c (NCALLS): Increase to 126. (F(compile_test)): Call llogb. (F(llogb)): New function. * manual/math.texi (Exponents and Logarithms): Document llogb, llogbf, llogbl, FP_LLOGB0 and FP_LLOGBNAN. * manual/libm-err-tab.pl (@all_functions): Add llogb. * sysdeps/ieee754/ldbl-opt/nldbl-llogb.c: New file. * sysdeps/ieee754/ldbl-opt/w_llogbl.c: Likewise. * sysdeps/ieee754/ldbl-opt/Makefile (libnldbl-calls): Add llogb. (CFLAGS-nldbl-llogb.c): New variable. * sysdeps/nacl/libm.abilist: Update. * sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise. |
|
|
Florian Weimer
|
705a79f825 |
libio: Limit buffer size to 8192 bytes [BZ #4099]
This avoids overly large buffers with network file systems which report very large block sizes. |
|
|
Joseph Myers
|
457663a7cd |
Add setpayloadsig, setpayloadsigf, setpayloadsigl.
TS 18661-1 defines functions for manipulating the payloads of NaNs. This patch implements the setpayloadsig functions for glibc; these are like the setpayload functions, but produce a signaling NaN instead of a quiet NaN. The substance of the implementation was included with the setpayload implementation, so the new files here just need to wrap the main files with different defines to build the new functions. Because the functions store a signaling NaN via a pointer and the libm-test macros choose a suitable initial value for the variable in such a case by comparing with the expected value, the relevant macro needs to clear exceptions after FE_INVALID may have been raised by that comparison. Tested for x86_64, x86, mips64 and powerpc. * math/bits/mathcalls.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (setpayloadsig): New declaration. * math/Versions (setpayloadsig): New libm symbol at version GLIBC_2.25. (setpayloadsigf): Likewise. (setpayloadsigl): Likewise. * math/Makefile (libm-calls): Add s_setpayloadsigF. * math/libm-test.inc (RUN_TEST_Ff_b1): Call feclearexcept (FE_ALL_EXCEPT) after initializing EXTRA_VAR. (setpayloadsig_test_data): New array. (setpayloadsig_test): New function. (main): Call setpayloadsig_test. * manual/arith.texi (FP Bit Twiddling): Document setpayloadsig, setpayloadsigf and setpayloadsigl. * manual/libm-err-tab.pl: Update comment on interfaces without ulps tabulated. * sysdeps/ieee754/dbl-64/s_setpayloadsig.c: New file. * sysdeps/ieee754/flt-32/s_setpayloadsigf.c: Likewise. * sysdeps/ieee754/ldbl-128/s_setpayloadsigl.c: Likewise. * sysdeps/ieee754/ldbl-128ibm/s_setpayloadsigl.c: Likewise. * sysdeps/ieee754/ldbl-96/s_setpayloadsigl.c: Likewise. * sysdeps/ieee754/ldbl-opt/nldbl-setpayloadsig.c: Likewise. * sysdeps/ieee754/ldbl-opt/Makefile (libnldbl-calls): Add setpayloadsig. (CFLAGS-nldbl-setpayloadsig.c): New variable. * sysdeps/nacl/libm.abilist: Update. * sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise. |
|
|
Joseph Myers
|
f3b904d963 |
More NEWS entries / fixes for float_t / double_t changes.
Document changes for x86_64 -mfpmath=sse and -mfpmath=sse+387. Don't put these NEWS entries in the middle of TS 18661-1 entries. |
|
|
Joseph Myers
|
b0216d3e4d |
Fix default float_t definition (bug 20855).
The default (top-level) version of bits/mathdef.h defines float_t to double. It is used on ColdFire, MicroBlaze, Nios II and SH3, all of which define FLT_EVAL_METHOD to 0, so float_t should be float (and C11 requires a certain correspondence between these typedefs and FLT_EVAL_METHOD values). I proposed fixing this default in <https://sourceware.org/ml/libc-alpha/2015-01/msg00499.html>, with no objections from architecture maintainers, and this patch makes that fix. As noted in the NEWS entry added, this might affect the ABIs of non-glibc libraries (ImageMagick has been mentioned in gcc-patches discussion of the S/390 case - which is unaffected by this patch), but as noted in my previous message, affected libraries would have problems with -mfpmath=sse anyway on 32-bit x86. A (compilation) testcase is added to verify the required correspondence of typedefs to FLT_EVAL_METHOD values. This test is built with -fexcess-precision=standard to avoid any issues with GCC 7 on S/390 providing a more accurate FLT_EVAL_METHOD definition in the default (no excess precision) mode. (This will also be usable to test a fix for the recently reported bug about these typedefs on x86_64 -mfpmath=387, as architecture-specific tests can be added that It is entirely possible that the fixed default makes some architecture-specific versions of bits/mathdef.h semantically equivalent to the default version and so no longer required. I don't intend to investigate that separately from the refactoring I proposed in <https://sourceware.org/ml/libc-alpha/2016-11/msg00745.html>, which will create as few header variants as possible for each group of definitions. Tested (compilation only) with build-many-glibcs.py. [BZ #20855] * bits/mathdef.h (float_t): Define to float. * math/test-flt-eval-method.c: New file. * math/Makefile (tests): Add test-flt-eval-method. (CFLAGS-test-flt-eval-method.c): New variable. |
|
|
Joseph Myers
|
eb3c12c784 |
Add setpayload, setpayloadf, setpayloadl.
TS 18661-1 defines functions for manipulating the payloads of NaNs. This patch implements the setpayload functions for glibc; these set a number (pointed to by a function argument) to a quiet NaN with the given payload, or to +0 if the given payload is not valid. The implementations are structured to allow the substance of the implementation to be shared with the setpayloadsig functions when those are added. The semantics in the TS are not entirely clear in the case where the payload passed to the function is zero (see discussion on the WG14 reflector last month). This patch implements what seems the most sensible interpretation, that -0 is never valid to give as the payload, but +0 is valid in the case where the kind of NaN being generated has its high mantissa bit set so payload 0 is actually possible in such a NaN. Tested for x86_64, x86, mips64 and powerpc. * math/bits/mathcalls.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (setpayload): New declaration. * math/Versions (setpayload): New libm symbol at version GLIBC_2.25. (setpayloadf): Likewise. (setpayloadl): Likewise. * math/Makefile (libm-calls): Add s_setpayloadF. * math/libm-test.inc (struct test_Ffp_b1_data): Rename to struct test_Ff_b1_data. (RUN_TEST_Ff_b1): New macro. (RUN_TEST_LOOP_Ff_b1): Likewise. (canonicalize_test_data): Update type. (setpayload_test_data): New array. (setpayload_test): New function. (main): Call setpayload_test. * manual/arith.texi (FP Bit Twiddling): Document setpayload, setpayloadf and setpayloadl. * manual/libm-err-tab.pl: Update comment on interfaces without ulps tabulated. * sysdeps/ieee754/dbl-64/s_setpayload.c: New file. * sysdeps/ieee754/dbl-64/s_setpayload_main.c: Likewise. * sysdeps/ieee754/dbl-64/wordsize-64/s_setpayload_main.c: Likewise. * sysdeps/ieee754/flt-32/s_setpayloadf.c: Likewise. * sysdeps/ieee754/flt-32/s_setpayloadf_main.c: Likewise. * sysdeps/ieee754/ldbl-128/s_setpayloadl.c: Likewise. * sysdeps/ieee754/ldbl-128/s_setpayloadl_main.c: Likewise. * sysdeps/ieee754/ldbl-128ibm/s_setpayloadl.c: Likewise. * sysdeps/ieee754/ldbl-128ibm/s_setpayloadl_main.c: Likewise. * sysdeps/ieee754/ldbl-96/s_setpayloadl.c: Likewise. * sysdeps/ieee754/ldbl-96/s_setpayloadl_main.c: Likewise. * sysdeps/ieee754/ldbl-opt/nldbl-setpayload.c: Likewise. * sysdeps/ieee754/ldbl-opt/Makefile (libnldbl-calls): Add setpayload. (CFLAGS-nldbl-setpayload.c): New variable. * sysdeps/nacl/libm.abilist: Update. * sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise. |
|
|
Joseph Myers
|
f82a4bdb73 |
Add SNAN, SNANF, SNANL macros.
TS 18661-1 defines SNAN macros for signaling NaN values, suitable for use in static initializers. This patch adds them to glibc's <math.h> (provided you are building with GCC 3.3 or later; no attempt is made to provide any kind of nonconforming fallback for older compilers without the __builtin_nans functions). Tested for x86_64 and x86. * math/math.h [__GLIBC_USE (IEC_60559_BFP_EXT) && __GNUC_PREREQ (3, 3)] (SNANF): New macro. [__GLIBC_USE (IEC_60559_BFP_EXT) && __GNUC_PREREQ (3, 3)] (SNAN): Likewise. [__GLIBC_USE (IEC_60559_BFP_EXT) && __GNUC_PREREQ (3, 3)] (SNANL): Likewise. * manual/arith.texi (Infinity and NaN): Document SNANF, SNAN and SNANL. * math/test-double.h (snan_value_MACRO): New macro. * math/test-float.h (snan_value_MACRO): Likewise. * math/test-ldouble.h (snan_value_MACRO): Likewise. * math/libm-test.inc (issignaling_test_data): Add tests of snan_value_MACRO. |
|
|
Joseph Myers
|
eaf5ad0bc4 |
Add canonicalize, canonicalizef, canonicalizel.
TS 18661-1 defines canonicalize functions to produce a canonical version of a floating-point representation. This patch implements these functions for glibc. As with the iscanonical macro, these functions are oriented to the decimal floating-point case, where some values have both canonical and noncanonical representations. However, the functions have a return value that says whether they succeeded in storing a canonical result; thus, they can fail for the case of an invalid representation (while still not making any particular choice from among multiple equally canonical valid representations of the same value). Since no floating-point formats in glibc actually have noncanonical valid representations, a type-generic implementation of these functions can be used that expects iscanonical to return 0 only for invalid representations. Now that iscanonical is used within libm.so, libm_hidden_proto / libm_hidden_def are added for __iscanonicall. The definition of these functions is intended to correspond to a convertFormat operation to the same floating-point format. Thus, they convert signaling NaNs to quiet NaNs, raising the "invalid" exception. Such a conversion "should" produce "the canonical version of that signaling NaN made quiet". libm-test.inc is made to check NaN payloads for the output of these functions, a new feature (at some point manipulation functions such as fabs and copysign should have tests added that verify payload preservation for them). As however some architectures may not follow the recommended practice of preserving NaN payloads when converting a signaling NaN to quiet, a new math-tests.h macro SNAN_TESTS_PRESERVE_PAYLOAD is added, and defined to 0 for non-NAN2008 MIPS; any other architectures seeing test failures for lack of payload preservation in this case should also define this macro to 0. (If any cases arise where the sign isn't preserved either, those should have a similar macro added.) The ldbl-96 and ldbl-128ibm tests of iscanonical are renamed and adapted to test canonicalizel as well on the same representations. Tested for x86_64, x86, mips64 and powerpc. * math/bits/mathcalls.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (canonicalize): New declaration. * math/Versions (canonicalize): New libm symbol at version GLIBC_2.25. (canonicalizef): Likewise. (canonicalizel): Likewise. * math/Makefile (gen-libm-calls): Add s_canonicalizeF. * math/s_canonicalize_template.c: New file. * math/libm-test.inc: Update comment on functions tested and testing of NaN payloads. (TEST_NAN_PAYLOAD): New macro. (NO_TEST_INLINE): Update value. (XFAIL_TEST): Likewise. (ERRNO_UNCHANGED): Likewise. (ERRNO_EDOM): Likewise. (ERRNO_ERANGE): Likewise. (IGNORE_RESULT): Likewise. (NON_FINITE): Likewise. (TEST_SNAN): Likewise. (NO_TEST_MATHVEC): Likewise. (TEST_NAN_PAYLOAD_CANONICALIZE): New macro. (check_float_internal): Check NaN payloads if TEST_NAN_PAYLOAD. (struct test_Ffp_b1_data): New type. (RUN_TEST_Ffp_b1): New macro. (RUN_TEST_LOOP_Ffp_b1): Likewise. (canonicalize_test_data): New array. (canonicalize_test): New function. (main): Call canonicalize_test. * manual/arith.texi (FP Bit Twiddling): Document canonicalize, canonicalizef and canonicalizel. * manual/libm-err-tab.pl: Update comment on interfaces without ulps tabulated. * sysdeps/ieee754/ldbl-opt/nldbl-canonicalize.c: New file. * sysdeps/ieee754/ldbl-opt/s_canonicalizel.c: Likewise. * sysdeps/ieee754/ldbl-opt/Makefile (libnldbl-calls): Add canonicalize. (CFLAGS-nldbl-canonicalize.c): New variable. * sysdeps/ieee754/ldbl-128ibm/test-iscanonical-ldbl-128ibm.c: Move to ... * sysdeps/ieee754/ldbl-128ibm/test-canonical-ldbl-128ibm.c: ... here. (do_test): Also test canonicalizel. * sysdeps/ieee754/ldbl-128ibm/Makefile (tests): Change test-iscanonical-ldbl-128ibm to test-canonical-ldbl-128ibm. * sysdeps/ieee754/ldbl-128ibm/include/bits/iscanonical.h: New file. * sysdeps/ieee754/ldbl-128ibm/s_iscanonicall.c (__iscanonicall): Use libm_hidden_def. * sysdeps/ieee754/ldbl-96/test-iscanonical-ldbl-96.c: Move to ... * sysdeps/ieee754/ldbl-96/test-canonical-ldbl-96.c: ... here. (do_test): Also test canonicalizel. * sysdeps/ieee754/ldbl-96/Makefile (tests): Change test-iscanonical-ldbl-96 to test-canonical-ldbl-96. * sysdeps/ieee754/ldbl-96/include/bits/iscanonical.h: New file. * sysdeps/ieee754/ldbl-96/s_iscanonicall.c (__iscanonicall): Use libm_hidden_def. * sysdeps/generic/math-tests.h (SNAN_TESTS_PRESERVE_PAYLOAD): New macro. * sysdeps/mips/math-tests.h [__mips_hard_float && !__mips_nan2008] (SNAN_TESTS_PRESERVE_PAYLOAD): Likewise. * sysdeps/nacl/libm.abilist: Update. * sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise. |
|
|
Florian Weimer
|
e863cce57b |
malloc: Remove malloc_get_state, malloc_set_state [BZ #19473]
After the removal of __malloc_initialize_hook, newly compiled Emacs binaries are no longer able to use these interfaces. malloc_get_state is only used during the Emacs build process, so we provide a stub implementation only. Existing Emacs binaries will not call this stub function, but still reference the symbol. The rewritten tst-mallocstate test constructs a dumped heap which should approximates what existing Emacs binaries pass to glibc malloc. |
|
Gabriel F. T. Gomes
|
6962682ffe |
Add strfromd, strfromf, and strfroml functions
ISO/IEC TS 18661-1 adds several functions in the strfrom family to stdlib. This patch adds strfromd, strfromf, and strfroml. This is being done in preparation for the new floating-point type, float128. The added functions convert a floating-point value into a string, with configurable format. |
|
|
Joseph Myers
|
f8e8b8ed9f |
Add getpayload, getpayloadf, getpayloadl.
TS 18661-1 defines functions for manipulating the payloads of NaNs. This patch implements the getpayload functions for glibc; these extract the NaN payload (from an argument passed as a pointer, for which corresponding libm-test support is added) and return it in the same floating-point type. The return value of these functions is unspecified for non-NaN arguments; the patch does the simplest thing to implement, which is that the functions do not check whether the argument is a NaN and just treat the relevant bits of the representation as a payload regardless. A conversion from integer to floating-point is used to produce the required return value, except in the ldbl-128 case; as 128-bit integers are not supported for all configurations using ldbl-128, the code constructs the required floating-point representation of the return value directly instead. Tested for x86_64, x86, mips64 and powerpc. * math/bits/mathcalls.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (getpayload): New declaration. * math/Versions (getpayload): New libm symbol at version GLIBC_2.25. (getpayloadf): Likewise. (getpayloadl): Likewise. * math/Makefile (libm-calls): Add s_getpayloadF. * math/libm-test.inc: Include <nan-high-order-bit.h>. (struct test_f_f_data): Add comment. (RUN_TEST_fp_f): New macro. (RUN_TEST_LOOP_fp_f): Likewise. (getpayload_test_data): New array. (getpayload_test): New function. (main): Call getpayload_test. * math/gen-libm-test.pl (parse_args): Handle 'p' in argument descriptor. * manual/arith.texi (FP Bit Twiddling): Document getpayload, getpayloadf and getpayloadl. * manual/libm-err-tab.pl: Update comment on interfaces without ulps tabulated. * sysdeps/ieee754/dbl-64/s_getpayload.c: New file. * sysdeps/ieee754/dbl-64/wordsize-64/s_getpayload.c: Likewise. * sysdeps/ieee754/flt-32/s_getpayloadf.c: Likewise. * sysdeps/ieee754/ldbl-128/s_getpayloadl.c: Likewise. * sysdeps/ieee754/ldbl-128ibm/s_getpayloadl.c: Likewise. * sysdeps/ieee754/ldbl-96/s_getpayloadl.c: Likewise. * sysdeps/nacl/libm.abilist: Update. * sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise. |
|
|
Joseph Myers
|
cc6a8d7457 |
Add totalordermag, totalordermagf, totalordermagl.
In addition to the totalorder functions, TS 18661-1 defines totalordermag functions, which do the same comparison but on the absolute values of the arguments. This patch implements these functions for glibc, including the type-generic macro in <tgmath.h>. In general the implementations are similar to but simpler than those for the totalorder functions. Tested for x86_64, x86, mips64 and powerpc. * math/bits/mathcalls.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (totalordermag): New declaration. * math/tgmath.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (totalordermag): New macro. * math/Versions (totalordermag): New libm symbol at version GLIBC_2.25. (totalordermagf): Likewise. (totalordermagl): Likewise. * math/Makefile (libm-calls): Add s_totalordermagF. * math/libm-test.inc (totalordermag_test_data): New array. (totalordermag_test): New function. (main): Call totalordermag_test. * math/test-tgmath.c (NCALLS): Increase to 125. (F(compile_test)): Call totalordermag. (F(totalordermag)): New function. * manual/arith.texi (FP Comparison Functions): Document totalordermag, totalordermagf and totalordermagl. * manual/libm-err-tab.pl: Update comment on interfaces without ulps tabulated. * sysdeps/ieee754/dbl-64/s_totalordermag.c: New file. * sysdeps/ieee754/dbl-64/wordsize-64/s_totalordermag.c: Likewise. * sysdeps/ieee754/flt-32/s_totalordermagf.c: Likewise. * sysdeps/ieee754/ldbl-128/s_totalordermagl.c: Likewise. * sysdeps/ieee754/ldbl-128ibm/s_totalordermagl.c: Likewise. * sysdeps/ieee754/ldbl-96/s_totalordermagl.c: Likewise. * sysdeps/ieee754/ldbl-opt/nldbl-totalordermag.c: Likewise. * sysdeps/ieee754/ldbl-opt/Makefile (libnldbl-calls): Add totalordermag. (CFLAGS-nldbl-totalordermag.c): New variable. * sysdeps/ieee754/ldbl-128ibm/test-totalorderl-ldbl-128ibm.c (do_test): Also test totalordermagl. * sysdeps/ieee754/ldbl-96/test-totalorderl-ldbl-96.c (do_test): Likewise. * sysdeps/nacl/libm.abilist: Update. * sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise. |
|
|
Joseph Myers
|
5e9d98a3d9 |
Add totalorder, totalorderf, totalorderl.
TS 18661-1 defines totalorder functions implementing the totalOrder comparison operation from IEEE 754-2008. This patch implements these functions for glibc, including the type-generic macro in <tgmath.h>. (The totalordermag functions will be added in a separate patch.) The description of the totalOrder operation is complicated. However, for IEEE interchange binary formats and the preferred quiet NaN convention, what that complicated description means is that you interpret the representation as a sign-magnitude integer (with -0 coming before +0) and do a <= comparison on that interpretation. For finite values and infinities the ordering of the sign-magnitude integers is just the same as the ordering of floating-point values, so this extends that to all representations. (Different representations of the same floating-point value - which includes same quantum in the decimal case - must still be considered equal by this operation, but that issue doesn't arise for IEEE interchange binary formats.) So the complications are: * When MIPS quiet NaN conventions are in use, the representation of NaNs needs adjusting before making such an integer comparison. This patch does this adjustment only when both arguments are NaNs, as there's no need for it if only one is a NaN, and as long as both are NaNs you can just flip the relevant bits without any problems from this turning a NaN into an infinity. * For the m68k version of ldbl-96, where the high mantissa bit is "don't care" for infinities and NaNs, representations where it differs must compare the same. Note: although the testcase for this compiles, I have not actually tested on m68k. * For ldbl-128ibm, the low part must be ignored when the high part is NaN, and low parts of +0 and -0 must be considered the same whatever the high part. The new tests in libm-test.inc are the first tests there specifying particular payloads for input NaNs. Separate tests are also added for the ldbl-96 and ldbl-128ibm special cases where there are different representations of the same value that must compare equal (which can't be covered in libm-test.inc as that only specifies values, not representations). Tested for x86_64, x86, mips64 and powerpc. * math/bits/mathcalls.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (totalorder): New declaration. * math/tgmath.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (totalorder): New macro. * math/Versions (totalorder): New libm symbol at version GLIBC_2.25. (totalorderf): Likewise. (totalorderl): Likewise. * math/Makefile (libm-calls): Add s_totalorderF. * math/gen-libm-test.pl (parse_args): Escape quotes in test name string. * math/libm-test.inc (PAYLOAD_DIG): New macro. (qnan_value_pl): Likewise. (snan_value_pl): Likewise. (qnan_value): Define using qnan_value_pl. (snan_value): Define using snan_value_pl. (struct test_ff_i_data): Add comment about which tests use this structure. (RUN_TEST_ff_b): New macro. (RUN_TEST_LOOP_ff_b): Likewise. (totalorder_test_data): New array. (totalorder_test): New function. (main): Call totalorder_test. * math/test-tgmath.c (NCALLS): Increase to 122. (F(compile_test)): Call totalorder. (F(totalorder)): New function. * manual/arith.texi (FP Comparison Functions): Document totalorder, totalorderf and totalorderl. * manual/libm-err-tab.pl: Update comment on interfaces without ulps tabulated. * sysdeps/ieee754/dbl-64/s_totalorder.c: New file. * sysdeps/ieee754/dbl-64/wordsize-64/s_totalorder.c: Likewise. * sysdeps/ieee754/flt-32/s_totalorderf.c: Likewise. * sysdeps/ieee754/ldbl-128/s_totalorderl.c: Likewise. * sysdeps/ieee754/ldbl-128ibm/s_totalorderl.c: Likewise. * sysdeps/ieee754/ldbl-96/s_totalorderl.c: Likewise. * sysdeps/ieee754/ldbl-opt/nldbl-totalorder.c: Likewise. * sysdeps/ieee754/ldbl-opt/Makefile (libnldbl-calls): Add totalorder. (CFLAGS-nldbl-totalorder.c): New variable. * sysdeps/ieee754/ldbl-128ibm/test-totalorderl-ldbl-128ibm.c: New file. * sysdeps/ieee754/ldbl-128ibm/Makefile [$(subdir) = math] (tests): Add test-totalorderl-ldbl-128ibm. * sysdeps/ieee754/ldbl-96/test-totalorderl-ldbl-96.c: New file. * sysdeps/ieee754/ldbl-96/Makefile [$(subdir) = math] (tests): Add test-totalorderl-ldbl-96. * sysdeps/nacl/libm.abilist: Update. * sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise. |