mirror of git://sourceware.org/git/glibc.git
2017 Commits
| Author | SHA1 | Message | Date |
|---|---|---|---|
Joseph Myers
|
4add86749a |
Require GCC 4.9 or later for building glibc.
This patch makes configure require GCC 4.9 or later for building glibc, and documents that requirement. Requiring GCC 4.9 or later allows use of _Generic (as in tzcode). It would allow <stdatomic.h> and _Atomic to be used as well if desired, although we need to avoid any libatomic dependencies on any platforms. This patch is explicitly the minimum to implement a new version requirement, with any consequent cleanups of conditional code (not in installed headers or files shared with gnulib etc.) to be done separately. Tested for x86_64. * configure.ac (libc_cv_compiler_ok): Require GCC 4.9 or later. * configure: Regenerated. * manual/install.texi (Tools for Compilation): Document requirement for GCC 4.9 or later. * INSTALL: Regenerated. |
|
Stefan Liebler
|
b08a6a0dea |
S390: Sync ptrace.h with kernel. [BZ #21539]
This patch removes PTRACE_GETREGS, PTRACE_SETREGS, PTRACE_GETFPREGS and PTRACE_SETFPREGS as these requests does not exist on s390 kernel. But the kernel has support for PTRACE_SINGLEBLOCK, PTRACE_SECCOMP_GET_FILTER, PTRACE_PEEKUSR_AREA, PTRACE_POKEUSR_AREA, PTRACE_GET_LAST_BREAK, PTRACE_ENABLE_TE, PTRACE_DISABLE_TE and PTRACE_TE_ABORT_RAND. Thus those are defined now. The current kernel s390 specific ptrace.h file also defines PTRACE_PEEKTEXT_AREA, PTRACE_PEEKDATA_AREA, PTRACE_POKETEXT_AREA, PTRACE_POKEDATA_AREA, PTRACE_PEEK_SYSTEM_CALL, PTRACE_POKE_SYSTEM_CALL and PTRACE_PROT, but those requests are not supported. Thus those defines are skipped in glibc ptrace.h. There were old includes of ptrace.h in sysdeps/s390/fpu/fesetenv.c. The ptrace feature isn't used there anymore, thus I removed the includes. Before this patch, <glibc>/sysdeps/unix/sysv/linux/s390/sys/ptrace.h uses ptrace-request 12 for PTRACE_GETREGS, but <kernel>/include/uapi/linux/ptrace.h uses 12 for PTRACE_SINGLEBLOCK. The s390 kernel has never had support for PTRACE_GETREGS! Thus glibc ptrace.h is adjusted to match kernel ptrace.h. The new s390 specific test ensures, that PTRACE_SINGLEBLOCK defined in glibc works as expected. If the kernel would interpret it as PTRACE_GETREGS, then the testcase will not make any progress and will time out. ChangeLog: [BZ #21539] * NEWS: Mention s390 ptrace request changes. * sysdeps/unix/sysv/linux/s390/sys/ptrace.h (PTRACE_GETREGS, PTRACE_SETREGS, PTRACE_GETFPREGS, PTRACE_SETFPREGS): Remove enum constant. (PT_GETREGS, PT_SETREGS, PT_GETFPREGS, T_SETFPREGS): Remove defines. (PTRACE_SINGLEBLOCK): New enum constant. (PT_STEPBLOCK): New define. (PTRACE_PEEKUSR_AREA, PTRACE_POKEUSR_AREA, PTRACE_GET_LAST_BREAK, PTRACE_ENABLE_TE, PTRACE_DISABLE_TE, PTRACE_TE_ABORT_RAND): New enum constant and define. * sysdeps/s390/fpu/fesetenv.c: Remove ptrace.h includes. * sysdeps/unix/sysv/linux/s390/tst-ptrace-singleblock.c: New file. * sysdeps/unix/sysv/linux/s390/Makefile: Add test. |
|
Siddhesh Poyarekar
|
2c0b90ab44 |
Enable tunables by default
All of the major architectures are adopting tunables as a way to add tuning to the library, from hwcap_mask for aarch64 to HLE for s390 and ifunc and cache geometry for x86. Given this adoption and the fact that we don't want additional tuning knobs to be added outside of tunables, it makes sense to enable tunables by default using this trivial patch. Smoke tested on x86 to ensure that tunables code was built without specifying it as a configure flag. I have kept it as --enabled and not changed it to --disable since we want to still keep the option of different kinds of front-ends for tunables. * configure.ac(--enable-tunables): Enable by default. * configure: Regenerate. * NEWS: Mention change. * manual/install.texi (enable-tunables): Adjust documentation. * INSTALL: Regenerate. |
|
Zack Weinberg
|
fd860eaaa8 |
Remove __need macros from errno.h (__need_Emath, __need_error_t).
This is fairly complicated, not because the users of __need_Emath and __need_error_t have complicated requirements, but because the core changes had a lot of fallout. __need_error_t exists for gnulib compatibility in argz.h and argp.h. error_t itself is a Hurdism, an enum containing all the E-constants, so you can do 'p (error_t) errno' in gdb and get a symbolic value. argz.h and argp.h use it for function return values, and they want to fall back to 'int' when that's not available. There is no reason why these nonstandard headers cannot just go ahead and include all of errno.h; so we do that. __need_Emath is defined only by .S files; what they _really_ need is for errno.h to avoid declaring anything other than the E-constants (e.g. 'extern int __errno_location(void);' is a syntax error in assembly language). This is replaced with a check for __ASSEMBLER__ in errno.h, plus a carefully documented requirement for bits/errno.h not to define anything other than macros. That in turn has the consequence that bits/errno.h must not define errno - fortunately, all live ports use the same definition of errno, so I've moved it to errno.h. The Hurd bits/errno.h must also take care not to define error_t when __ASSEMBLER__ is defined, which involves repeating all of the definitions twice, but it's a generated file so that's okay. * stdlib/errno.h: Remove __need_Emath and __need_error_t logic. Reorganize file. Declare errno here. When __ASSEMBLER__ is defined, don't declare anything other than the E-constants. * include/errno.h: Change conditional for exposing internal declarations to (not _ISOMAC and not __ASSEMBLER__). * bits/errno.h: Remove logic for __need_Emath. Document requirements for a port-specific bits/errno.h. * sysdeps/unix/sysv/linux/bits/errno.h * sysdeps/unix/sysv/linux/alpha/bits/errno.h * sysdeps/unix/sysv/linux/hppa/bits/errno.h * sysdeps/unix/sysv/linux/mips/bits/errno.h * sysdeps/unix/sysv/linux/sparc/bits/errno.h: Add multiple-include guard and check against improper inclusion. Remove __need_Emath logic. Don't declare errno here. Ensure all constants are defined as simple integer literals. Consistent formatting. * sysdeps/mach/hurd/errnos.awk: Likewise. Only define error_t and enum __error_t_codes if __ASSEMBLER__ is not defined. * sysdeps/mach/hurd/bits/errno.h: Regenerate. * argp/argp.h, string/argz.h: Don't define __need_error_t before including errno.h. * sysdeps/i386/i686/fpu/multiarch/s_cosf-sse2.S * sysdeps/i386/i686/fpu/multiarch/s_sincosf-sse2.S * sysdeps/i386/i686/fpu/multiarch/s_sinf-sse2.S * sysdeps/x86_64/fpu/s_cosf.S * sysdeps/x86_64/fpu/s_sincosf.S * sysdeps/x86_64/fpu/s_sinf.S: Just include errno.h; don't define __need_Emath or include bits/errno.h directly. |
|
|
Stefan Liebler
|
12d2dd7060 |
Optimize generic spinlock code and use C11 like atomic macros.
This patch optimizes the generic spinlock code. The type pthread_spinlock_t is a typedef to volatile int on all archs. Passing a volatile pointer to the atomic macros which are not mapped to the C11 atomic builtins can lead to extra stores and loads to stack if such a macro creates a temporary variable by using "__typeof (*(mem)) tmp;". Thus, those macros which are used by spinlock code - atomic_exchange_acquire, atomic_load_relaxed, atomic_compare_exchange_weak - have to be adjusted. According to the comment from Szabolcs Nagy, the type of a cast expression is unqualified (see http://www.open-std.org/jtc1/sc22/wg14/www/docs/dr_423.htm): __typeof ((__typeof (*(mem)) *(mem)) tmp; Thus from spinlock perspective the variable tmp is of type int instead of type volatile int. This patch adjusts those macros in include/atomic.h. With this construct GCC >= 5 omits the extra stores and loads. The atomic macros are replaced by the C11 like atomic macros and thus the code is aligned to it. The pthread_spin_unlock implementation is now using release memory order instead of sequentially consistent memory order. The issue with passed volatile int pointers applies to the C11 like atomic macros as well as the ones used before. I've added a glibc_likely hint to the first atomic exchange in pthread_spin_lock in order to return immediately to the caller if the lock is free. Without the hint, there is an additional jump if the lock is free. I've added the atomic_spin_nop macro within the loop of plain reads. The plain reads are also realized by C11 like atomic_load_relaxed macro. The new define ATOMIC_EXCHANGE_USES_CAS determines if the first try to acquire the spinlock in pthread_spin_lock or pthread_spin_trylock is an exchange or a CAS. This is defined in atomic-machine.h for all architectures. The define SPIN_LOCK_READS_BETWEEN_CMPXCHG is now removed. There is no technical reason for throwing in a CAS every now and then, and so far we have no evidence that it can improve performance. If that would be the case, we have to adjust other spin-waiting loops elsewhere, too! Using a CAS loop without plain reads is not a good idea on many targets and wasn't used by one. Thus there is now no option to do so. Architectures are now using the generic spinlock automatically if they do not provide an own implementation. Thus the pthread_spin_lock.c files in sysdeps folder are deleted. ChangeLog: * NEWS: Mention new spinlock implementation. * include/atomic.h: (__atomic_val_bysize): Cast type to omit volatile qualifier. (atomic_exchange_acq): Likewise. (atomic_load_relaxed): Likewise. (ATOMIC_EXCHANGE_USES_CAS): Check definition. * nptl/pthread_spin_init.c (pthread_spin_init): Use atomic_store_relaxed. * nptl/pthread_spin_lock.c (pthread_spin_lock): Use C11-like atomic macros. * nptl/pthread_spin_trylock.c (pthread_spin_trylock): Likewise. * nptl/pthread_spin_unlock.c (pthread_spin_unlock): Use atomic_store_release. * sysdeps/aarch64/nptl/pthread_spin_lock.c: Delete File. * sysdeps/arm/nptl/pthread_spin_lock.c: Likewise. * sysdeps/hppa/nptl/pthread_spin_lock.c: Likewise. * sysdeps/m68k/nptl/pthread_spin_lock.c: Likewise. * sysdeps/microblaze/nptl/pthread_spin_lock.c: Likewise. * sysdeps/mips/nptl/pthread_spin_lock.c: Likewise. * sysdeps/nios2/nptl/pthread_spin_lock.c: Likewise. * sysdeps/aarch64/atomic-machine.h (ATOMIC_EXCHANGE_USES_CAS): Define. * sysdeps/alpha/atomic-machine.h: Likewise. * sysdeps/arm/atomic-machine.h: Likewise. * sysdeps/i386/atomic-machine.h: Likewise. * sysdeps/ia64/atomic-machine.h: Likewise. * sysdeps/m68k/coldfire/atomic-machine.h: Likewise. * sysdeps/m68k/m680x0/m68020/atomic-machine.h: Likewise. * sysdeps/microblaze/atomic-machine.h: Likewise. * sysdeps/mips/atomic-machine.h: Likewise. * sysdeps/powerpc/powerpc32/atomic-machine.h: Likewise. * sysdeps/powerpc/powerpc64/atomic-machine.h: Likewise. * sysdeps/s390/atomic-machine.h: Likewise. * sysdeps/sparc/sparc32/atomic-machine.h: Likewise. * sysdeps/sparc/sparc32/sparcv9/atomic-machine.h: Likewise. * sysdeps/sparc/sparc64/atomic-machine.h: Likewise. * sysdeps/tile/tilegx/atomic-machine.h: Likewise. * sysdeps/tile/tilepro/atomic-machine.h: Likewise. * sysdeps/unix/sysv/linux/hppa/atomic-machine.h: Likewise. * sysdeps/unix/sysv/linux/m68k/coldfire/atomic-machine.h: Likewise. * sysdeps/unix/sysv/linux/nios2/atomic-machine.h: Likewise. * sysdeps/unix/sysv/linux/sh/atomic-machine.h: Likewise. * sysdeps/x86_64/atomic-machine.h: Likewise. |
|
|
Joseph Myers
|
7553131847 |
Fix struct sigaltstack namespace (bug 21517).
glibc defines the stack_t type with the tag struct sigaltstack. This is not permitted by POSIX; sigaltstack is only reserved with file scope in the namespace of ordinary identifiers, not the tag namespace, and in the case where stack_t is obtained from ucontext.h rather than signal.h, it's not reserved with file scope at all. This patch removes the tag accordingly and updates uses in glibc of struct sigaltstack. This is similar to the removal of the "struct siginfo" tag a few years ago: C++ name mangling changes are an unavoidable consequence. A NEWS item is added to note the changed mangling. There is inevitably some risk of breaking builds of anything that relies on the struct sigaltstack name (though the first few hits I looked at from codesearch.debian.net generally seemed to involve code that could use the stack_t name conditionally, so depending on how they determine the conditionals they may work with glibc not defining the struct tag anyway). Tested for x86_64 and x86, and with build-many-glibcs.py. [BZ #21517] * bits/types/stack_t.h (stack_t): Remove struct tag. * sysdeps/unix/sysv/linux/bits/types/stack_t.h (stack_t): Likewise. * sysdeps/unix/sysv/linux/mips/bits/types/stack_t.h (stack_t): Likewise. * debug/segfault.c (install_handler): Use stack_t instead of struct sigaltstack. * hurd/hurd/signal.h (struct hurd_sigstate): Likewise. * hurd/trampoline.c (_hurd_setup_sighandler): Likewise. * include/signal.h (__sigaltstack): Likwise. * signal/sigaltstack.c (__sigaltstack): Likewise. * signal/signal.h (sigaltstack): Likewise. * sysdeps/mach/hurd/i386/signal-defines.sym (SIGALTSTACK__SS_SP__OFFSET): Likewise. (SIGALTSTACK__SS_SIZE__OFFSET): Likewise. (SIGALTSTACK__SS_FLAGS__OFFSET): Likewise. * sysdeps/mach/hurd/sigaltstack.c (__sigaltstack): Likewise. * sysdeps/mach/hurd/sigstack.c (sigstack): Likewise. * sysdeps/unix/sysv/linux/alpha/sys/procfs.h (struct elf_prstatus): Likewise. * sysdeps/unix/sysv/linux/hppa/____longjmp_chk.c (CHECK_SP): Likewise. * sysdeps/unix/sysv/linux/ia64/sys/procfs.h (struct elf_prstatus): Likewise. * sysdeps/unix/sysv/linux/m68k/____longjmp_chk.c (CHECK_SP): Likewise. * sysdeps/unix/sysv/linux/powerpc/sys/procfs.h (struct elf_prstatus): Likewise. * sysdeps/unix/sysv/linux/sh/sys/procfs.h (struct elf_prstatus): Likewise. * sysdeps/unix/sysv/linux/sys/procfs.h (struct elf_prstatus): Likewise. |
|
Adhemerval Zanella
|
52bd938169 |
posix: Implement preadv2 and pwritev2
This patch adds support of preadv2 and pwritev2 which are similar to
preadv/pwritev but with an extra flag argument. As for preadv/pwritev
both interfaces are added a non-standard GNU API.
For default 'posix' implementation trying to emulate the Linux supported
flags is troublesome:
* We can not temporary change the file state of the O_DSYNC and O_SYNC
flags to emulate RWF_{D}SYNC (attempts to change the state of using
fcntl are silently ignored).
* IOCB_HIPRI requires the file opened in O_DIRECT and uses an internal
semantic not provided by any other flag (O_NONBLOCK for instance).
So default sysdeps/posix implementations fails with EOPNOTSUPP for any non
supported flag (which are none currently) calls generic preadv/pwritev.
Basically this implementation supports only preadv2 called as preadv (with
flags sets to 0).
The Linux one uses the preadv2/pwritev2 syscall if defined, otherwise it
call preadv/writev. Instead of using the previous __ASSUME_* to
unconditionally issue the syscall (and avoid building the fallback routine),
it call pread/write if the preadv2/pwritev2 syscalls fails. The idea
is just avoid adding another __ASSUME_* and checking each architecture
on every kernel bump and simplify code conditionals.
Checked on x86_64-linux-gnu and on i686-linux-gnu and a check with
run-built-tests=no on aarch64-linux-gnu, alpha-linux-gnu, arm-linux-gnueabihf,
ia64-linux-gnu, m68k-linux-gnu, microblaze-linux-gnu, mips{64,64n32}-linux-gnu,
nios2-linux-gnu, powerpc{64,64le}-linux-gnu, s390{x}-linux-gnu,
sparc{64,v9}-linux-gnu, tile{gx,pro}-linux-gnu, and sh4-linux-gnu (all using
gcc 6.3).
* NEWS: Add note about pwritev2 and preadv2 inclusion.
* misc/Makefile (routines): Add preadv2, preadv64v2, pwritev2, and
pwritev64v2.
(tests): Add tst-preadvwritev2 and tst-preadvwritev64v2.
* misc/Versions (GLIBC_2.26): Add preadv2, preadv64v2, pwritev2, and
pwritev64v2.
* misc/preadv2.c: New file.
* misc/preadv64v2.c: Likewise.
* misc/pwritev2.c: Likewise.
* misc/pwritev64v2.c: Likewise.
* misc/tst-preadvwritev2.c: Likewise.
* misc/tst-preadvwritev64v2.c: Likewise.
* manual/llio.texi: Add preadv2 and pwritev2 documentation.
* misc/sys/uio.h [__USE_GNU && !__USE_FILE_OFFSET64] (preadv2): New
prototype.
[__USE_GNU && !__USE_FILE_OFFSET64] (pwritev2): Likewise.
[__USE_GNU && __USE_FILE_OFFSET64] (preadv64v2): Likewise.
[__USE_GNU && __USE_FILE_OFFSET64] (pwritev64v2): Likewise.
* misc/tst-preadvwritev-common.c (PREADV): Define if not defined.
(PWRITEV): Likewise.
(do_test_with_offset): Use PREADV and PWRITEV macros and check for
ENOSYS.
* nptl/tst-cancel4.c (tf_pwritev2): New test.
(tf_preadv2): Likewise.
(tf_fsync): Add tf_pwritev2 and tf_preadv2.
* sysdeps/posix/preadv2.c: Likewise.
* sysdeps/posix/preadv64v2.c: Likewise.
* sysdeps/posix/pwritev2.c: Likewise.
* sysdeps/posix/pwritev64v2.c: Likewise.
* sysdeps/unix/sysv/linux/kernel-features.h: Add comment for syscall
support in kernel.
* sysdeps/unix/sysv/linux/preadv2.c: Likewise.
* sysdeps/unix/sysv/linux/preadv64v2.c: Likewise.
* sysdeps/unix/sysv/linux/pwritev2.c: Likewise.
* sysdeps/unix/sysv/linux/pwritev64v2.c: Likewise.
* sysdeps/unix/sysv/linux/preadv.c (preadv): Add libc_hidden_def.
* sysdeps/unix/sysv/linux/preadv64.c (preadv64): Likewise.
* sysdeps/unix/sysv/linux/pwritev.c (pwritev): Likewise.
* sysdeps/unix/sysv/linux/pwritev64.c (pwritev64): Likewise.
* sysdeps/unix/sysv/linux/bits/uio.h: Add supported preadv2/pwritev2
support flags on Linux.
* sysdeps/unix/sysv/linux/aarch64/libc.abilist (GLIBC_2.26): Add
preadv2, preadv64v2, pwritev2, pwritev64v2.
* sysdeps/unix/sysv/linux/alpha/libc.abilist (GLIBC_2.26): Likewise.
* sysdeps/unix/sysv/linux/arm/libc.abilist (GLIBC_2.26): Likewise.
* sysdeps/unix/sysv/linux/hppa/libc.abilist (GLIBC_2.26): Likewise.
* sysdeps/unix/sysv/linux/i386/libc.abilist (GLIBC_2.26): Likewise.
* sysdeps/unix/sysv/linux/ia64/libc.abilist (GLIBC_2.26): Likewise.
* sysdeps/unix/sysv/linux/m68k/coldfire/libc.abilist (GLIBC_2.26):
Likewise.
* sysdeps/unix/sysv/linux/m68k/m680x0/libc.abilist (GLIBC_2.26):
Likewise.
* sysdeps/unix/sysv/linux/microblaze/libc.abilist (GLIBC_2.26):
Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/fpu/libc.abilist (GLIBC_2.26):
Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/nofpu/libc.abilist (GLIBC_2.26):
Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/n32/libc.abilist (GLIBC_2.26):
Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/n64/libc.abilist (GLIBC_2.26):
Likewise.
* sysdeps/unix/sysv/linux/nios2/libc.abilist (GLIBC_2.26): Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libc.abilist
(GLIBC_2.26): Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libc.abilist
(GLIBC_2.26): Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libc.abilist (GLIBC_2.26):
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libc-le.abilist
(GLIBC_2.26): Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/libc.abilist (GLIBC_2.26):
Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/libc.abilist (GLIBC_2.26):
Likewise.
* sysdeps/unix/sysv/linux/sh/libc.abilist (GLIBC_2.26): Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/libc.abilist (GLIBC_2.26):
Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/libc.abilist (GLIBC_2.26):
Likewise.
* sysdeps/sysv/linux/tile/tilegx/tilegx32/libc.abilist (GLIBC_2.26):
Likewise.
* sysdeps/sysv/linux/tile/tilegx/tilegx64/libc.abilist (GLIBC_2.26):
Likewise.
* sysdeps/unix/sysv/linux/tile/tilepro/libc.abilist (GLIBC_2.26):
Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/libc.abilist (GLIBC_2.26):
Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/libc.abilist (GLIBC_2.26):
Likewise.
|
|
Dennis Wölfing
|
2e0bbbfbf9 |
Add reallocarray function
The reallocarray function is an extension from OpenBSD. It is an integer-overflow-safe replacement for realloc(p, X*Y) and malloc(X*Y) (realloc(NULL, X*Y)). It can therefore help in preventing certain security issues in code. This is an updated version of a patch originally submitted by Rüdiger Sonderfeld in May 2014 [1]. Checked on i686-linux-gnu and x86_64-linux-gnu. [1] <https://sourceware.org/ml/libc-alpha/2014-05/msg00481.html>. 2017-05-30 Dennis Wölfing <denniswoelfing@gmx.de> Rüdiger Sonderfeld <ruediger@c-plusplus.de> * include/stdlib.h (__libc_reallocarray): New declaration. * malloc/Makefile (routines): Add reallocarray. (tests): Add tst-reallocarray.c. * malloc/Versions: Add reallocarray and __libc_reallocarray. * malloc/malloc-internal.h (check_mul_overflow_size_t): New inline function. * malloc/malloc.h (reallocarray): New declaration. * stdlib/stdlib.h (reallocarray): Likewise. * malloc/reallocarray.c: New file. * malloc/tst-reallocarray.c: New test file. * manual/memory.texi: Document reallocarray. * sysdeps/unix/sysv/linux/aarch64/libc.abilist: Add reallocarray. * sysdeps/unix/sysv/linux/alpha/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/arm/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/hppa/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/i386/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/ia64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/coldfire/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/m680x0/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/microblaze/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/fpu/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/nofpu/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/n32/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/n64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/nios2/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libc-le.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/sh/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/tilepro/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libc.abilist: Likewise. |
|
|
Zack Weinberg
|
42a844c6a2 |
Remove the bulk of the NaCl port.
The NaCl port has not been actively maintained since before the 2.25 release. The complementary GCC back-end was never contributed to GCC, and we are given to understand that the current NaCl SDK has switched to Clang and therefore cannot be used to build glibc anymore, so we doubt that the port remains useful. This commit simply removes the sysdeps/arm/nacl and sysdeps/nacl directories and the abi-tags entry. Remove the NaCl port. * abi-tags: Remove .*-.*-nacl.* entry. * sysdeps/arm/nacl: Remove directory and contents. * sysdeps/nacl: Likewise. |
|
Florian Weimer
|
cd354a3849 |
Remove <sys/ultrasound.h>
This header was once used for constants related to the Gravis Ultrasound sound card. |
|
|
Joseph Myers
|
139ace9575 |
Require Linux kernel 3.2 or later on x86 / x86_64.
As per the recent discussion, this patch implements a requirement for Linux 3.2 or later for x86 and x86_64. This is only the initial change to increase the configured minimum; it's expected that followup patches would deal with associated removal of conditionals that are no longer needed. If we remove the start-up test on the kernel version, of course the NEWS and README text should then be revised (to reflect that this version is just one such that glibc does not intend to include compatibility code for any older kernel version, rather than older kernels necessarily failing to work or glibc necessarily having compatibility code for newer interfaces). The followups would be able to assume presence of getcpu (x86_64), recvmmsg (not always through its own syscall, sometimes only through socketcall), sendmmsg (likewise), /proc/$pid/task/$tid/comm, f_flags from statfs, prlimit64. Tested for x86_64 and x86. * sysdeps/unix/sysv/linux/i386/configure.ac (arch_minimum_kernel): Remove. * sysdeps/unix/sysv/linux/i386/configure: Regenerated. * sysdeps/unix/sysv/linux/x86_64/64/configure.ac (arch_minimum_kernel): Remove. * sysdeps/unix/sysv/linux/x86_64/64/configure: Regenerated. * README: Update statement about Linux kernel requirements. |
|
|
Adhemerval Zanella
|
daeb1fa2e1 |
[BZ 21340] add support for POSIX_SPAWN_SETSID
This patch adds support for the POSIX_SPAWN_SETSID flag. It was recently accepted by the Austin Group: http://austingroupbugs.net/view.php?id=1044 Checked on x86_64 Daurnimator <quae@daurnimator.com> Adhemerval Zanella <adhemerval.zanella@linaro.org> [BZ #21340] * posix/Makefile (tests): Add tst-posix_spawn-setsid to list of tests. * posix/spawn.h: define POSIX_SPAWN_SETSID flag. * posix/spawnattr_setflags.c (ALL_FLAGS): Add POSIX_SPAWN_SETSID to valid flags. * posix/tst-posix_spawn-setsid.c: Add test for POSIX_SPAWN_SETSID. * sysdeps/mach/hurd/spawni.c (__spawni): Implementation of POSIX_SPAWN_SETSID. * sysdeps/posix/spawni.c (__spawni): Likewise. * sysdeps/unix/sysv/linux/spawni.c (__spawni_child): Likewise. * NEWS: Add note about POSIX_SPAWN_SETSID support. |
|
|
Florian Weimer
|
025b33ae84 | malloc: Turn cfree into a compatibility symbol | |
|
Florian Weimer
|
44500cbb25 |
resolv: Remove EDNS fallback [BZ #21369]
EDNS is disabled by default (so there is interoperability issue), and the fallback code is problematic because it prevents an application from obtaining DNSSEC data after a FORMERR response. |
|
|
Florian Weimer
|
e14a27723c |
resolv: Reduce EDNS payload size to 1200 bytes [BZ #21361]
This hardens the stub resolver against fragmentation-based attacks. |
|
|
Florian Weimer
|
e4e794841e | resolv: Remove IQUERY support | |
Egmont Koblinger
|
ea1898dded |
localedata: hu_HU: fix multiple sorting bugs (bug 18934)
Fix the incorrect sorting order of a digraph and its geminated variant,
regression introduced by a faulty fix to bug 13547 in commit
|
|
Thorsten Kukuk
|
1e4d83f6fe |
Deprecate libnsl by default (only shared library will be
build for backward compatibility, no linking possible) and disable building
of libnss_compat, libnss_nis and libnss_nisplus, except --enable-obsolete-nsl
option is given to configure.
* config.h.in: Add LINK_OBSOLETE_NSL.
* config.make.in: Add build-obsolete-nsl.
* configure.ac: Add obsolete-nsl option.
* include/libc-symbols.h: Define libnsl_hidden_nolink_def.
* include/rpcsvc/yp.h: Add missing functions as libnsl_hidden_proto.
* include/rpcsvc/nislib.h: Likewise.
* include/rpcsvc/ypclnt.h: Likewise.
* manual/install.texi: Document --enable-obsolete-nsl.
* nis/Makefile: Build only libnsl by default (add build-obsolete-nsl).
* nis/nis_add.c: Replace libnsl_hidden_def with
libnsl_hidden_nolink_def.
* nis/nis_addmember.c: Likewise.
* nis/nis_call.c: Likewise.
* nis/nis_clone_obj.c: Likewise.
* nis/nis_defaults.c: Likeise.
* nis/nis_domain_of_r.c: Likewise.
* nis/nis_error.c: Likewise.
* nis/nis_file.c: Likewise.
* nis/nis_free.c: Likewise.
* nis_local_names.c: Likewise.
* nis/nis_lookup.c: Likewise.
* nis/nis_modify.c: Likewise.
* nis/nis_print.c: Likewise.
* nis/nis_remove.c: Likewise.
* nis/nis_table.c: Likewise.
* nis/nis_util.c: Likewise.
* nis/nis_xdr.c: Likewise.
* nis/yp_xdr.c: Likewise.
* nis/ypclnt.c: Likewise.
* nis/ypupdate_xdr.c: Likewise.
* nis/nis_checkpoint.c: Add libnsl_hidden_nolink_def to all functions.
* nis/nis_clone_dir.c: Likewise.
* nis/nis_clone_res.c: Likewise.
* nis/nis_creategroup.c: Likewise.
* nis/nis_destroygroup.c: Likewise.
* nis/nis_domain_of.c: Likewise.
* nis/nis_getservlist.c: Likewise.
* nis/nis_ismember.c: Likewise.
* nis/nis_mkdir.c: Likewise.
* nis/nis_ping.c: Likewise.
* nis/nis_print_group_entry.c: Likewise.
* nis/nis_removemember.c: Likewise.
* nis/nis_rmdir.c: Likewise.
* nis/nis_server.c: Likewise.
* nis/nis_subr.c: Likewise.
* nis/nis_verifygroup.c: Likewise.
Signed-off-by: Thorsten Kukuk <kukuk@suse.com>
|
|
|
Thorsten Kukuk
|
6af0e51094 |
If sunrpc code is disabled, rpcsvc header files, rpcgen and
librpcsvc.a should not be installed, too. * sunrpc/Makefile: don't build and install rpcsvc header files, rpcgen and librpcsvc.a by default. Signed-off-by: Thorsten Kukuk <kukuk@suse.com> |
|
Mike FABIAN
|
0b38d66a4e |
Bug 20313: Update to Unicode 9.0.0
* Unicode 9.0.0 Support: Character encoding, character type info, and transliteration tables are all updated to Unicode 9.0.0, using generator scripts contributed by Mike FABIAN (Red Hat). |
|
|
Siddhesh Poyarekar
|
58557c2293 | Open master for development | |
|
Siddhesh Poyarekar
|
4e054e6b07 | Add list of bugs fixed in 2.25 | |
|
Siddhesh Poyarekar
|
0cea3587d3 |
Add missing NEWS items
Add NEWS items for the two new pthreads implementations, i.e. the condition variables algorithms and the pthread_rwlock algorithms. |
|
|
Siddhesh Poyarekar
|
099191b1f5 |
Fix typo in NEWS
The ip6-bytestring resolver corresponds to the RES_USEBSTRING flag and not RES_NOIP6DOTINT. Thank you Michael Kerrisk for noticing and pointing it out. |
|
|
Joseph Myers
|
58b587c1f8 |
Update copyright dates not handled by scripts/update-copyrights.
I've updated copyright dates in glibc for 2017. This is the patch for the changes not generated by scripts/update-copyrights and subsequent build / regeneration of generated files. Please remember to include 2017 in the dates for any new files added in future (which means updating any existing uncommitted patches you have that add new files to use the new copyright dates in them). * NEWS: Update copyright dates. * catgets/gencat.c (print_version): Likewise. * csu/version.c (banner): Likewise. * debug/catchsegv.sh: Likewise. * debug/pcprofiledump.c (print_version): Likewise. * debug/xtrace.sh (do_version): Likewise. * elf/ldconfig.c (print_version): Likewise. * elf/ldd.bash.in: Likewise. * elf/pldd.c (print_version): Likewise. * elf/sotruss.sh: Likewise. * elf/sprof.c (print_version): Likewise. * iconv/iconv_prog.c (print_version): Likewise. * iconv/iconvconfig.c (print_version): Likewise. * locale/programs/locale.c (print_version): Likewise. * locale/programs/localedef.c (print_version): Likewise. * login/programs/pt_chown.c (print_version): Likewise. * malloc/memusage.sh (do_version): Likewise. * malloc/memusagestat.c (print_version): Likewise. * malloc/mtrace.pl: Likewise. * manual/libc.texinfo: Likewise. * nptl/version.c (banner): Likewise. * nscd/nscd.c (print_version): Likewise. * nss/getent.c (print_version): Likewise. * nss/makedb.c (print_version): Likewise. * posix/getconf.c (main): Likewise. * scripts/test-installation.pl: Likewise. * sysdeps/unix/sysv/linux/lddlibc4.c (main): Likewise. |
|
|
Joseph Myers
|
bfff8b1bec | Update copyright dates with scripts/update-copyrights. | |
|
Florian Weimer
|
fc82b0a2df |
CVE-2015-5180: resolv: Fix crash with internal QTYPE [BZ #18784]
Also rename T_UNSPEC because an upcoming public header file update will use that name. |
|
|
Siddhesh Poyarekar
|
7715d3ab50 | Add NEWS item for tunables | |
|
Florian Weimer
|
bbe989ee87 | resolv: Deprecate RES_BLAST | |
|
Florian Weimer
|
b76e065991 | resolv: Deprecate the "inet6" option and RES_USE_INET6 [BZ #19582] | |
|
Joseph Myers
|
423c2b9d08 |
Add fromfp functions.
TS 18661-1 defines fromfp functions (fromfp, fromfpx, ufromfp, ufromfpx, and float and long double variants) to convert from floating-point to an integer type with any signedness and any given width up to that of intmax_t, in any of the five IEEE rounding modes (the usual four for binary floating point, plus rounding to nearest with ties rounding away from zero), with control of whether in-range non-integer values should result in the "inexact" exception being raised. This patch implements these functions for glibc. These implementations are (apart from raising exceptions) pure integer implementations; it's entirely possible optimized versions could be devised for some architectures. A common math/fromfp.h header provides various common helper code that can readily be shared between the implementations for different types. For each type, the bulk of the implementation is also shared between the four functions, with wrappers that define UNSIGNED and INEXACT macros appropriately before including the main implementation. As the functions return intmax_t and uintmax_t without math.h being allowed to expose those typedef names, they are declared using __intmax_t and __uintmax_t as obtained from <bits/types.h>. The FP_INT_* rounding direction macros are defined as ascending integers in the order the names are listed in the TS; I see no significant value in allowing architectures to vary the values of them. The libm-test machinery is duly adapted to handle unsigned int arguments, and intmax_t and uintmax_t results. Because each test input is generally tested for four functions, five rounding modes and several different widths, the libm-test.inc additions are very large. Thus, the diffs in the body of this message exclude the libm-test.inc changes, with the full patch being attached gzipped. The bulk of the new tests were generated (expanded from a test input plus rounding results and information about where it lies in the relevant interval between integers, to libm-test tests for all relevant combinations of function, rounding direction and width) by a script that's included in the patch as math/gen-fromfp-tests.py (input data math/gen-fromfp-tests-inputs); as an ad hoc script that's not really expected to be rerun, it's not very polished, but it's at least plausibly useful for adding any further tests for these functions in future. I may split the libm-test tests up by function in future (so both libm-test.inc and auto-libm-test-out are split into separate files, and the tests for each function are also built and run separately), but not for 2.25. For no obvious reason, adding tgmath tests for the new functions resulted in -Wuninitialized errors from test-tgmath.c about the variable i being used uninitialized. Those errors were correct - the variable is read by the frexp version in test-tgmath.c (where real frexp would write through that pointer instead of reading it) - but I don't know why this patch would result in the pre-existing issue being newly detected. The patch initializes the variable to avoid those errors. With these changes, glibc 2.25 should have all the library features from TS 18661-1 other than the functions that round result to narrower type (and constant rounding directions, but I'm considering those mainly a compiler feature not a library one). Tested for x86_64, x86, mips64 and powerpc. * math/bits/mathcalls.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (fromfp): New declaration. [__GLIBC_USE (IEC_60559_BFP_EXT)] (fromfpx): Likewise. [__GLIBC_USE (IEC_60559_BFP_EXT)] (ufromfp): Likewise. [__GLIBC_USE (IEC_60559_BFP_EXT)] (ufromfpx): Likewise. * math/tgmath.h (__TGMATH_TERNARY_FIRST_REAL_RET_ONLY): New macro. [__GLIBC_USE (IEC_60559_BFP_EXT)] (fromfp): Likewise. [__GLIBC_USE (IEC_60559_BFP_EXT)] (ufromfp): Likewise. [__GLIBC_USE (IEC_60559_BFP_EXT)] (fromfpx): Likewise. [__GLIBC_USE (IEC_60559_BFP_EXT)] (ufromfpx): Likewise. * math/math.h: Include <bits/types.h>. [__GLIBC_USE (IEC_60559_BFP_EXT)] (FP_INT_UPWARD): New enum constant and macro. (FP_INT_DOWNWARD): Likewise. (FP_INT_TOWARDZERO): Likewise. (FP_INT_TONEARESTFROMZERO): Likewise. (FP_INT_TONEAREST): Likewise. * math/Versions (fromfp): New libm symbol at version GLIBC_2.25. (fromfpf): Likewise. (fromfpl): Likewise. (ufromfp): Likewise. (ufromfpf): Likewise. (ufromfpl): Likewise. (fromfpx): Likewise. (fromfpxf): Likewise. (fromfpxl): Likewise. (ufromfpx): Likewise. (ufromfpxf): Likewise. (ufromfpxl): Likewise. * math/Makefile (libm-calls): Add s_fromfpF, s_ufromfpF, s_fromfpxF and s_ufromfpxF. * math/gen-fromfp-tests.py: New file. * math/gen-fromfp-tests-inputs: Likewise. * math/libm-test.inc: Include <stdint.h> (check_intmax_t): New function. (check_uintmax_t): Likewise. (struct test_fiu_M_data): New type. (struct test_fiu_U_data): Likewise. (RUN_TEST_fiu_M): New macro. (RUN_TEST_LOOP_fiu_M): Likewise. (RUN_TEST_fiu_U): Likewise. (RUN_TEST_LOOP_fiu_U): Likewise. (fromfp_test_data): New array. (fromfp_test): New function. (fromfpx_test_data): New array. (fromfpx_test): New function. (ufromfp_test_data): New array. (ufromfp_test): New function. (ufromfpx_test_data): New array. (ufromfpx_test): New function. (main): Call fromfp_test, fromfpx_test, ufromfp_test and ufromfpx_test. * math/gen-libm-test.pl (parse_args): Handle u, M and U descriptor characters. * math/test-tgmath-ret.c: Include <stdint.h>. (rm): New variable. (width): Likewise. (CHECK_RET_CONST_TYPE): Take extra arguments and pass them to called function. (CHECK_RET_CONST_FLOAT): Take extra arguments and pass them to CHECK_RET_CONST_TYPE. (CHECK_RET_CONST_DOUBLE): Likewise. (CHECK_RET_CONST_LDOUBLE): Likewise. (CHECK_RET_CONST): Take extra arguments and pass them to calls macros. (fromfp): New CHECK_RET_CONST call. (ufromfp): Likewise. (fromfpx): Likewise. (ufromfpx): Likewise. (do_test): Call check_return_fromfp, check_return_ufromfp, check_return_fromfpx and check_return_ufromfpx. * math/test-tgmath.c: Include <stdint.h> (NCALLS): Increase to 138. (F(compile_test)): Initialize i. Call fromfp functions. (F(fromfp)): New function. (F(fromfpx)): Likewise. (F(ufromfp)): Likewise. (F(ufromfpx)): Likewise. * manual/arith.texi (Rounding Functions): Document FP_INT_UPWARD, FP_INT_DOWNWARD, FP_INT_TOWARDZERO, FP_INT_TONEARESTFROMZERO, FP_INT_TONEAREST, fromfp, fromfpf, fromfpl, ufromfp, ufromfpf, ufromfpl, fromfpx, fromfpxf, fromfpxl, ufromfpx, ufromfpxf and ufromfpxl. * manual/libm-err-tab.pl (@all_functions): Add fromfp, fromfpx, ufromfp and ufromfpx. * math/fromfp.h: New file. * sysdeps/ieee754/dbl-64/s_fromfp.c: Likewise. * sysdeps/ieee754/dbl-64/s_fromfp_main.c: Likewise. * sysdeps/ieee754/dbl-64/s_fromfpx.c: Likewise. * sysdeps/ieee754/dbl-64/s_ufromfp.c: Likewise. * sysdeps/ieee754/dbl-64/s_ufromfpx.c: Likewise. * sysdeps/ieee754/flt-32/s_fromfpf.c: Likewise. * sysdeps/ieee754/flt-32/s_fromfpf_main.c: Likewise. * sysdeps/ieee754/flt-32/s_fromfpxf.c: Likewise. * sysdeps/ieee754/flt-32/s_ufromfpf.c: Likewise. * sysdeps/ieee754/flt-32/s_ufromfpxf.c: Likewise. * sysdeps/ieee754/ldbl-128/s_fromfpl.c: Likewise. * sysdeps/ieee754/ldbl-128/s_fromfpl_main.c: Likewise. * sysdeps/ieee754/ldbl-128/s_fromfpxl.c: Likewise. * sysdeps/ieee754/ldbl-128/s_ufromfpl.c: Likewise. * sysdeps/ieee754/ldbl-128/s_ufromfpxl.c: Likewise. * sysdeps/ieee754/ldbl-128ibm/s_fromfpl.c: Likewise. * sysdeps/ieee754/ldbl-128ibm/s_fromfpl_main.c: Likewise. * sysdeps/ieee754/ldbl-128ibm/s_fromfpxl.c: Likewise. * sysdeps/ieee754/ldbl-128ibm/s_ufromfpl.c: Likewise. * sysdeps/ieee754/ldbl-128ibm/s_ufromfpxl.c: Likewise. * sysdeps/ieee754/ldbl-96/s_fromfpl.c: Likewise. * sysdeps/ieee754/ldbl-96/s_fromfpl_main.c: Likewise. * sysdeps/ieee754/ldbl-96/s_fromfpxl.c: Likewise. * sysdeps/ieee754/ldbl-96/s_ufromfpl.c: Likewise. * sysdeps/ieee754/ldbl-96/s_ufromfpxl.c: Likewise. * sysdeps/ieee754/ldbl-opt/Makefile (libnldbl-calls): Add fromfp, ufromfp, fromfpx and ufromfpx. (CFLAGS-nldbl-fromfp.c): New variable. (CFLAGS-nldbl-fromfpx.c): Likewise. (CFLAGS-nldbl-ufromfp.c): Likewise. (CFLAGS-nldbl-ufromfpx.c): Likewise. * sysdeps/ieee754/ldbl-opt/nldbl-compat.h: Include <stdint.h>. * sysdeps/ieee754/ldbl-opt/nldbl-fromfp.c: New file. * sysdeps/ieee754/ldbl-opt/nldbl-fromfpx.c: Likewise. * sysdeps/ieee754/ldbl-opt/nldbl-ufromfp.c: Likewise. * sysdeps/ieee754/ldbl-opt/nldbl-ufromfpx.c: Likewise. * sysdeps/nacl/libm.abilist: Update. * sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise. |
|
Nick Alcock
|
cecbc7967f | Enable -fstack-protector=* when requested by configure [BZ #7065] | |
|
Joseph Myers
|
a5ac5676be |
Update NEWS feature test macro description of TS 18661-1 support.
The NEWS entry for the feature test macro __STDC_WANT_IEC_60559_BFP_EXT__ describes the state of support for that TS as "most features from that TS are not supported by the GNU C Library". This patch updates it to say "not all features from that TS are supported by the GNU C Library". (The functions not yet supported are the fromfp functions - I'm working on them, but they may not be done before the freeze - and the functions round result to narrower type - which definitely won't be started for 2.25, since they require significant infrastructure work. That's 30 functions, which is less than half the number of functions in the TS, so saying "most" now seems inaccurate.) |
|
|
Joseph Myers
|
41c67149b9 |
Add roundeven, roundevenf, roundevenl.
TS 18661-1 defines roundeven functions that round a floating-point number to the nearest integer, in that floating-point type, with ties rounding to even (whereas the round functions round ties away from zero). As with other such functions, they raise no exceptions apart from "invalid" for signaling NaNs. There was a previous user request for this functionality in glibc in <https://sourceware.org/ml/libc-help/2015-02/msg00005.html>. This patch implements these functions for glibc. The implementations use integer bit-manipulation (or roundeven on the high and low parts, in the IBM long double case). It's possible that there may be faster approaches on some architectures (in particular, on AArch64 the frintn instruction should do exactly what's required); I'll leave it to architecture maintainers or others interested to implement such architecture-specific versions if desired. (Where architectures have instructions to round to nearest integer in the current rounding mode, implementations saving and restoring the rounding mode - and dealing with exceptions if those instructions generate "inexact" - are also possible, though their performance depends on the cost of manipulating exceptions / rounding mode state.) Tested for x86_64, x86, mips64 and powerpc. * math/bits/mathcalls.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (roundeven): New declaration. * math/tgmath.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (roundeven): New macro. * math/Versions (roundeven): New libm symbol at version GLIBC_2.25. (roundevenf): Likewise. (roundevenl): Likewise. * math/Makefile (libm-calls): Add s_roundevenF. * math/libm-test.inc (roundeven_test_data): New array. (roundeven_test): New function. (main): Call roundeven_test. * math/test-tgmath.c (NCALLS): Increase to 134. (F(compile_test)): Call roundeven. (F(roundeven)): New function. * manual/arith.texi (Rounding Functions): Document roundeven, roundevenf and roundevenl. * manual/libm-err-tab.pl (@all_functions): Add roundeven. * include/math.h (roundeven): Use libm_hidden_proto. * sysdeps/ieee754/dbl-64/s_roundeven.c: New file. * sysdeps/ieee754/dbl-64/wordsize-64/s_roundeven.c: Likewise. * sysdeps/ieee754/flt-32/s_roundevenf.c: Likewise. * sysdeps/ieee754/ldbl-128/s_roundevenl.c: Likewise. * sysdeps/ieee754/ldbl-128ibm/s_roundevenl.c: Likewise. * sysdeps/ieee754/ldbl-96/s_roundevenl.c: Likewise. * sysdeps/ieee754/ldbl-opt/Makefile (libnldbl-calls): Add roundeven. (CFLAGS-nldbl-roundeven.c): New variable. * sysdeps/ieee754/ldbl-opt/nldbl-roundeven.c: New file. * sysdeps/nacl/libm.abilist: Update. * sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise. |
|
|
Joseph Myers
|
525f803984 |
Add fmaxmag, fminmag functions.
TS 18661-1 defines fmaxmag and fminmag functions that return the argument with maximum / minimum magnitude (acting like fmax / fmin if the arguments have the same magnitude or either argument is a NaN). These correspond to the IEEE 754-2008 operations maxNumMag and minNumMag. This patch implements these functions for glibc. They are implemented with type-generic templates. Tests are based on those for fmax and fmin. Tested for x86_64, x86, mips64 and powerpc. * math/bits/mathcalls.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (fmaxmag): New declaration. (fminmag): Likewise. * math/tgmath.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (fmaxmag): New macro. [__GLIBC_USE (IEC_60559_BFP_EXT)] (fminmag): Likewise. * math/Versions (fmaxmag): New libm symbol at version GLIBC_2.25. (fmaxmagf): Likewise. (fmaxmagl): Likewise. (fminmag): Likewise. (fminmagf): Likewise. (fminmagl): Likewise. * math/Makefile (gen-libm-calls): Add s_fmaxmagF and s_fminmagF. * math/s_fmaxmag_template.c: New file. * math/s_fminmag_template.c: Likewise. * math/libm-test.inc (fmaxmag_test_data): New array. (fmaxmag_test): New function. (fminmag_test_data): New array. (fminmag_test): New function. (main): Call fmaxmag_test and fminmag_test. * math/test-tgmath.c (NCALLS): Increase to 132. (F(compile_test)): Call fmaxmag and fminmag. (F(fminmag)): New function. (F(fmaxmag)): Likewise. * manual/arith.texi (Misc FP Arithmetic): Document fminmag, fminmagf, fminmagl, fmaxmag, fmaxmagf and fmaxmagl. * manual/libm-err-tab.pl (@all_functions): Add fmaxmag and fminmag. * sysdeps/ieee754/ldbl-opt/nldbl-fmaxmag.c: New file. * sysdeps/ieee754/ldbl-opt/nldbl-fminmag.c: Likewise. * sysdeps/ieee754/ldbl-opt/s_fmaxmagl.c: Likewise. * sysdeps/ieee754/ldbl-opt/s_fminmagl.c: Likewise. * sysdeps/ieee754/ldbl-opt/Makefile (libnldbl-calls): Add fmaxmag and fminmag. (CFLAGS-nldbl-fmaxmag.c): New variable. (CFLAGS-nldbl-fminmag.c): Likewise. * sysdeps/nacl/libm.abilist: Update. * sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise. |
|
|
Zack Weinberg
|
ea1bd74def |
New string function explicit_bzero (from OpenBSD).
explicit_bzero(s, n) is the same as memset(s, 0, n), except that the compiler is not allowed to delete a call to explicit_bzero even if the memory pointed to by 's' is dead after the call. Right now, this effect is achieved externally by having explicit_bzero be a function whose semantics are unknown to the compiler, and internally, with a no-op asm statement that clobbers memory. This does mean that small explicit_bzero operations cannot be expanded inline as small memset operations can, but on the other hand, small memset operations do get deleted by the compiler. Hopefully full compiler support for explicit_bzero will happen relatively soon. There are two new tests: test-explicit_bzero.c verifies the visible semantics in the same way as the existing test-bzero.c, and tst-xbzero-opt.c verifies the not-being-optimized-out property. The latter is conceptually based on a test written by Matthew Dempsky for the OpenBSD regression suite. The crypt() implementation has an immediate use for this new feature. We avoid having to add a GLIBC_PRIVATE alias for explicit_bzero by running all of libcrypt's calls through the fortified variant, __explicit_bzero_chk, which is in the impl namespace anyway. Currently I'm not aware of anything in libc proper that needs this, but the glue is all in place if it does become necessary. The legacy DES implementation wasn't bothering to clear its buffers, so I added that, mostly for consistency's sake. * string/explicit_bzero.c: New routine. * string/test-explicit_bzero.c, string/tst-xbzero-opt.c: New tests. * string/Makefile (routines, strop-tests, tests): Add them. * string/test-memset.c: Add ifdeffage for testing explicit_bzero. * string/string.h [__USE_MISC]: Declare explicit_bzero. * debug/explicit_bzero_chk.c: New routine. * debug/Makefile (routines): Add it. * debug/tst-chk1.c: Test fortification of explicit_bzero. * string/bits/string3.h: Fortify explicit_bzero. * manual/string.texi: Document explicit_bzero. * NEWS: Mention addition of explicit_bzero. * crypt/crypt-entry.c (__crypt_r): Clear key-dependent intermediate data before returning, using explicit_bzero. * crypt/md5-crypt.c (__md5_crypt_r): Likewise. * crypt/sha256-crypt.c (__sha256_crypt_r): Likewise. * crypt/sha512-crypt.c (__sha512_crypt_r): Likewise. * include/string.h: Redirect internal uses of explicit_bzero to __explicit_bzero_chk[_internal]. * string/Versions [GLIBC_2.25]: Add explicit_bzero. * debug/Versions [GLIBC_2.25]: Add __explicit_bzero_chk. * sysdeps/arm/nacl/libc.abilist * sysdeps/unix/sysv/linux/aarch64/libc.abilist * sysdeps/unix/sysv/linux/alpha/libc.abilist * sysdeps/unix/sysv/linux/arm/libc.abilist * sysdeps/unix/sysv/linux/hppa/libc.abilist * sysdeps/unix/sysv/linux/i386/libc.abilist * sysdeps/unix/sysv/linux/ia64/libc.abilist * sysdeps/unix/sysv/linux/m68k/coldfire/libc.abilist * sysdeps/unix/sysv/linux/m68k/m680x0/libc.abilist * sysdeps/unix/sysv/linux/microblaze/libc.abilist * sysdeps/unix/sysv/linux/mips/mips32/fpu/libc.abilist * sysdeps/unix/sysv/linux/mips/mips32/nofpu/libc.abilist * sysdeps/unix/sysv/linux/mips/mips64/n32/libc.abilist * sysdeps/unix/sysv/linux/mips/mips64/n64/libc.abilist * sysdeps/unix/sysv/linux/nios2/libc.abilist * sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libc.abilist * sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libc.abilist * sysdeps/unix/sysv/linux/powerpc/powerpc64/libc-le.abilist * sysdeps/unix/sysv/linux/powerpc/powerpc64/libc.abilist * sysdeps/unix/sysv/linux/s390/s390-32/libc.abilist * sysdeps/unix/sysv/linux/s390/s390-64/libc.abilist * sysdeps/unix/sysv/linux/sh/libc.abilist * sysdeps/unix/sysv/linux/sparc/sparc32/libc.abilist * sysdeps/unix/sysv/linux/sparc/sparc64/libc.abilist * sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libc.abilist * sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libc.abilist * sysdeps/unix/sysv/linux/tile/tilepro/libc.abilist * sysdeps/unix/sysv/linux/x86_64/64/libc.abilist * sysdeps/unix/sysv/linux/x86_64/x32/libc.abilist: Add entries for explicit_bzero and __explicit_bzero_chk. |
|
|
Joseph Myers
|
c0b4353654 |
Define FE_SNANS_ALWAYS_SIGNAL.
TS 18661-1 defines a macro FE_SNANS_ALWAYS_SIGNAL in <fenv.h>, to indicate that the recommended practice regarding sNaNs (that operations always produce a qNaN output with "invalid" exception, even in the fmax / fmin / hypot / pow cases where a qNaN input would not result in qNaN output) is followed. Now that those functions with C99 special cases for NaNs have been fixed not to apply those special cases to sNaN, only to qNaN, glibc follows that recommended practice. This patch makes it define the corresponding macro. Since compiler optimizations may affect whether sNaNs behave as expected and the macro relates to both language and library features, it is only defined if __SUPPORT_SNAN__ is defined (which GCC defines for -fsignaling-nans). It is also not defined if FE_INVALID is undefined, since the recommended practice specifically refers to raising the "invalid" exception, so it seems inappropriate to define the macro for soft-float cases without support for exceptions. (Further refinement would be possible in cases where bits/fenv.h is shared by configurations both with and without exceptions support.) Tested for x86_64 and x86, and also did compile-only testing for nios2 to cover the no-exceptions case. * math/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT) && FE_INVALID && __SUPPORT_SNAN__] (FE_SNANS_ALWAYS_SIGNAL): New macro. * math/test-fe-snans-always-signal.c: New file. * math/Makefile (tests): Add test-fe-snans-always-signal. (CFLAGS-test-fe-snans-always-signal.c): New variable. * manual/arith.texi (Infinity and NaN): Document FE_SNANS_ALWAYS_SIGNAL. |
|
|
Florian Weimer
|
92dcaa3e2f | Add getentropy, getrandom, <sys/random.h> [BZ #17252] | |
|
Zack Weinberg
|
c03073774f |
Make _REENTRANT and _THREAD_SAFE aliases for _POSIX_C_SOURCE=199506L.
For many years, the only effect of these macros has been to make unistd.h declare getlogin_r. _POSIX_C_SOURCE >= 199506L also causes this function to be declared. However, people who don't carefully read all the headers might be confused into thinking they need to define _REENTRANT for any threaded code (as was indeed the case a long time ago). Therefore, remove __USE_REENTRANT, and make _REENTRANT and _THREAD_SAFE into synonyms for _POSIX_C_SOURCE=199506L. This will only affect programs that don't select a higher conformance level some other way. For instance, -std=c89 -D_REENTRANT will see a change in visible declarations, but -std=c99 -D_POSIX_C_SOURCE=200809L -D_REENTRANT won't, and -D_REENTRANT all by itself also won't, because _DEFAULT_SOURCE implies _POSIX_C_SOURCE > 199506. * include/features.h: Remove __USE_REENTRANT. Treat _REENTRANT and _THREAD_SAFE the same as _POSIX_C_SOURCE=199506L, if a higher POSIX conformance level has not been selected by other macros. * NEWS, manual/creature.texi: Document this change. * posix/unistd.h, posix/bits/unistd.h: Don't check __USE_REENTRANT. * include/libc-symbols.h: Don't define _REENTRANT. * scripts/check-installed-headers.sh: Don't undefine _REENTRANT. |
|
Martin Galvan
|
23b5cae1af |
Add pretty printers for the NPTL lock types
This patch adds pretty printers for the following NPTL types: - pthread_mutex_t - pthread_mutexattr_t - pthread_cond_t - pthread_condattr_t - pthread_rwlock_t - pthread_rwlockattr_t To load the pretty printers into your gdb session, do the following: python import sys sys.path.insert(0, '/path/to/glibc/build/nptl/pretty-printers') end source /path/to/glibc/source/pretty-printers/nptl-printers.py You can check which printers are registered and enabled by issuing the 'info pretty-printer' gdb command. Printers should trigger automatically when trying to print a variable of one of the types mentioned above. The printers are architecture-independent, and were tested on an AMD64 running Ubuntu 14.04 and an x86 VM running Fedora 24. In order to work, the printers need to know the values of various flags that are scattered throughout pthread.h and pthreadP.h as enums and #defines. Since replicating these constants in the printers file itself would create a maintenance burden, I wrote a script called gen-py-const.awk that Makerules uses to extract the constants. This script is pretty much the same as gen-as-const.awk, except it doesn't cast the constant values to 'long' and is thorougly documented. The constants need only to be enumerated in a .pysym file, which is then referenced by a Make variable called gen-py-const-headers. As for the install directory, I discussed this with Mike Frysinger and Siddhesh Poyarekar, and we agreed that it can be handled in a separate patch, and shouldn't block merging of this one. In addition, I've written a series of test cases for the pretty printers. Each lock type (mutex, condvar and rwlock) has two test programs, one for itself and other for its related 'attributes' object. Each test program in turn has a PExpect-based Python script that drives gdb and compares its output to the expected printer's. The tests run on the glibc host, which is assumed to have both gdb and PExpect; if either is absent the tests will fail with code 77 (UNSUPPORTED). For cross-testing you should use cross-test-ssh.sh as test-wrapper. I've tested the printers on both native builds and a cross build using a Beaglebone Black running Debian, with the build system's filesystem shared with the board through NFS. Finally, I've written a README that explains all this and more. * INSTALL: Regenerated. * Makeconfig: Add comments and whitespace to make the control flow clearer. (+link-printers-tests, +link-pie-printers-tests, CFLAGS-printers-tests, installed-rtld-LDFLAGS, built-rtld-LDFLAGS, link-libc-rpath, link-libc-tests-after-rpath-link, link-libc-printers-tests): New. (rtld-LDFLAGS, rtld-tests-LDFLAGS, link-libc-tests-rpath-link, link-libc-tests): Use the new variables as required. * Makerules ($(py-const)): New rule. generated: Add $(py-const). * README.pretty-printers: New file. * Rules (tests-printers-programs, tests-printers-out, py-env): New. (others): Depend on $(py-const). (tests): Depend on $(tests-printers-programs) or $(tests-printers-out), as required. Pass $(tests-printers) to merge-test-results.sh. * manual/install.texi: Add requirements for testing the pretty printers. * nptl/Makefile (gen-py-const-headers, pretty-printers, tests-printers, CFLAGS-test-mutexattr-printers.c CFLAGS-test-mutex-printers.c, CFLAGS-test-condattr-printers.c, CFLAGS-test-cond-printers.c, CFLAGS-test-rwlockattr-printers.c CFLAGS-test-rwlock-printers.c, tests-printers-libs): Define. * nptl/nptl-printers.py: New file. * nptl/nptl_lock_constants.pysym: Likewise. * nptl/test-cond-printers.c: Likewise. * nptl/test-cond-printers.py: Likewise. * nptl/test-condattr-printers.c: Likewise. * nptl/test-condattr-printers.py: Likewise. * nptl/test-mutex-printers.c: Likewise. * nptl/test-mutex-printers.py: Likewise. * nptl/test-mutexattr-printers.c: Likewise. * nptl/test-mutexattr-printers.py: Likewise. * nptl/test-rwlock-printers.c: Likewise. * nptl/test-rwlock-printers.py: Likewise. * nptl/test-rwlockattr-printers.c: Likewise. * nptl/test-rwlockattr-printers.py: Likewise. * scripts/gen-py-const.awk: Likewise. * scripts/test_printers_common.py: Likewise. * scripts/test_printers_exceptions.py: Likewise. |
|
|
Joseph Myers
|
55a38f8236 |
Add llogb, llogbf, llogbl.
TS 18661-1 defines llogb functions that are like ilogb except that they return long int instead of int. Corresponding FP_LLOGB* macros are defined, whose values are required to have the obvious correspondence to those of the FP_ILOGB* macros. This patch implements these functions and macros for glibc. llogb uses the type-generic infrastructure, with an implementation similar to the wrapper for ilogb but with additional conversion from FP_ILOGB* to FP_LLOGB*; this approach avoids needing to modify or duplicate any of the architecture-specific ilogb implementations. Tests are also based on those for ilogb. Ideally the llogb functions would alias the ilogb ones when long is 32-bit, but such aliasing requires the associated header declarations of the different-type alias to be hidden, typically by defining macros before including the header (see e.g. how sysdeps/ieee754/dbl-64/wordsize-64/s_llround.c defines lround to __hidden_lround before including <math.h>). The infrastructure for type-generic function implementations does not support defining such macros at present (since C code can't define a macro whose name is determined by other macros). So this patch leaves them as separate functions (similar to e.g. scalbln and scalbn being separate in such a case as well), but with the remapping of FP_ILOGB* to FP_LLOGB* conditioned out in the case where it would be the identity map. Tested for x86_64, x86, mips64 and powerpc. * math/bits/mathcalls.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (llogb): New declaration. * math/tgmath.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (llogb): New macro. * math/math.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (__FP_LONG_MAX): New macro. [__GLIBC_USE (IEC_60559_BFP_EXT)] (FP_LLOGB0): Likewise. [__GLIBC_USE (IEC_60559_BFP_EXT)] (FP_LLOGBNAN): Likewise. * math/Versions (llogb): New libm symbol at version GLIBC_2.25. (llogbf): Likewise. (llogbl): Likewise. * math/Makefile (gen-libm-calls): Add w_llogbF. (tests): Add test-fp-llogb-constants. * math/w_llogb_template.c: New file. Based on math/w_ilogb_template.c. * math/libm-test.inc (llogb_test_data): New array. (llogb_test): New function. (main): Call llogb_test. * math/test-fp-llogb-constants.c: New file. Based on math/test-fp-ilogb-constants.c. * math/test-tgmath-ret.c (llogb): New CHECK_RET_CONST call. (do_test): Call check_return_llogb. * math/test-tgmath.c (NCALLS): Increase to 126. (F(compile_test)): Call llogb. (F(llogb)): New function. * manual/math.texi (Exponents and Logarithms): Document llogb, llogbf, llogbl, FP_LLOGB0 and FP_LLOGBNAN. * manual/libm-err-tab.pl (@all_functions): Add llogb. * sysdeps/ieee754/ldbl-opt/nldbl-llogb.c: New file. * sysdeps/ieee754/ldbl-opt/w_llogbl.c: Likewise. * sysdeps/ieee754/ldbl-opt/Makefile (libnldbl-calls): Add llogb. (CFLAGS-nldbl-llogb.c): New variable. * sysdeps/nacl/libm.abilist: Update. * sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise. |
|
|
Florian Weimer
|
705a79f825 |
libio: Limit buffer size to 8192 bytes [BZ #4099]
This avoids overly large buffers with network file systems which report very large block sizes. |
|
|
Joseph Myers
|
457663a7cd |
Add setpayloadsig, setpayloadsigf, setpayloadsigl.
TS 18661-1 defines functions for manipulating the payloads of NaNs. This patch implements the setpayloadsig functions for glibc; these are like the setpayload functions, but produce a signaling NaN instead of a quiet NaN. The substance of the implementation was included with the setpayload implementation, so the new files here just need to wrap the main files with different defines to build the new functions. Because the functions store a signaling NaN via a pointer and the libm-test macros choose a suitable initial value for the variable in such a case by comparing with the expected value, the relevant macro needs to clear exceptions after FE_INVALID may have been raised by that comparison. Tested for x86_64, x86, mips64 and powerpc. * math/bits/mathcalls.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (setpayloadsig): New declaration. * math/Versions (setpayloadsig): New libm symbol at version GLIBC_2.25. (setpayloadsigf): Likewise. (setpayloadsigl): Likewise. * math/Makefile (libm-calls): Add s_setpayloadsigF. * math/libm-test.inc (RUN_TEST_Ff_b1): Call feclearexcept (FE_ALL_EXCEPT) after initializing EXTRA_VAR. (setpayloadsig_test_data): New array. (setpayloadsig_test): New function. (main): Call setpayloadsig_test. * manual/arith.texi (FP Bit Twiddling): Document setpayloadsig, setpayloadsigf and setpayloadsigl. * manual/libm-err-tab.pl: Update comment on interfaces without ulps tabulated. * sysdeps/ieee754/dbl-64/s_setpayloadsig.c: New file. * sysdeps/ieee754/flt-32/s_setpayloadsigf.c: Likewise. * sysdeps/ieee754/ldbl-128/s_setpayloadsigl.c: Likewise. * sysdeps/ieee754/ldbl-128ibm/s_setpayloadsigl.c: Likewise. * sysdeps/ieee754/ldbl-96/s_setpayloadsigl.c: Likewise. * sysdeps/ieee754/ldbl-opt/nldbl-setpayloadsig.c: Likewise. * sysdeps/ieee754/ldbl-opt/Makefile (libnldbl-calls): Add setpayloadsig. (CFLAGS-nldbl-setpayloadsig.c): New variable. * sysdeps/nacl/libm.abilist: Update. * sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise. |
|
|
Joseph Myers
|
f3b904d963 |
More NEWS entries / fixes for float_t / double_t changes.
Document changes for x86_64 -mfpmath=sse and -mfpmath=sse+387. Don't put these NEWS entries in the middle of TS 18661-1 entries. |
|
|
Joseph Myers
|
b0216d3e4d |
Fix default float_t definition (bug 20855).
The default (top-level) version of bits/mathdef.h defines float_t to double. It is used on ColdFire, MicroBlaze, Nios II and SH3, all of which define FLT_EVAL_METHOD to 0, so float_t should be float (and C11 requires a certain correspondence between these typedefs and FLT_EVAL_METHOD values). I proposed fixing this default in <https://sourceware.org/ml/libc-alpha/2015-01/msg00499.html>, with no objections from architecture maintainers, and this patch makes that fix. As noted in the NEWS entry added, this might affect the ABIs of non-glibc libraries (ImageMagick has been mentioned in gcc-patches discussion of the S/390 case - which is unaffected by this patch), but as noted in my previous message, affected libraries would have problems with -mfpmath=sse anyway on 32-bit x86. A (compilation) testcase is added to verify the required correspondence of typedefs to FLT_EVAL_METHOD values. This test is built with -fexcess-precision=standard to avoid any issues with GCC 7 on S/390 providing a more accurate FLT_EVAL_METHOD definition in the default (no excess precision) mode. (This will also be usable to test a fix for the recently reported bug about these typedefs on x86_64 -mfpmath=387, as architecture-specific tests can be added that It is entirely possible that the fixed default makes some architecture-specific versions of bits/mathdef.h semantically equivalent to the default version and so no longer required. I don't intend to investigate that separately from the refactoring I proposed in <https://sourceware.org/ml/libc-alpha/2016-11/msg00745.html>, which will create as few header variants as possible for each group of definitions. Tested (compilation only) with build-many-glibcs.py. [BZ #20855] * bits/mathdef.h (float_t): Define to float. * math/test-flt-eval-method.c: New file. * math/Makefile (tests): Add test-flt-eval-method. (CFLAGS-test-flt-eval-method.c): New variable. |
|
|
Joseph Myers
|
eb3c12c784 |
Add setpayload, setpayloadf, setpayloadl.
TS 18661-1 defines functions for manipulating the payloads of NaNs. This patch implements the setpayload functions for glibc; these set a number (pointed to by a function argument) to a quiet NaN with the given payload, or to +0 if the given payload is not valid. The implementations are structured to allow the substance of the implementation to be shared with the setpayloadsig functions when those are added. The semantics in the TS are not entirely clear in the case where the payload passed to the function is zero (see discussion on the WG14 reflector last month). This patch implements what seems the most sensible interpretation, that -0 is never valid to give as the payload, but +0 is valid in the case where the kind of NaN being generated has its high mantissa bit set so payload 0 is actually possible in such a NaN. Tested for x86_64, x86, mips64 and powerpc. * math/bits/mathcalls.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (setpayload): New declaration. * math/Versions (setpayload): New libm symbol at version GLIBC_2.25. (setpayloadf): Likewise. (setpayloadl): Likewise. * math/Makefile (libm-calls): Add s_setpayloadF. * math/libm-test.inc (struct test_Ffp_b1_data): Rename to struct test_Ff_b1_data. (RUN_TEST_Ff_b1): New macro. (RUN_TEST_LOOP_Ff_b1): Likewise. (canonicalize_test_data): Update type. (setpayload_test_data): New array. (setpayload_test): New function. (main): Call setpayload_test. * manual/arith.texi (FP Bit Twiddling): Document setpayload, setpayloadf and setpayloadl. * manual/libm-err-tab.pl: Update comment on interfaces without ulps tabulated. * sysdeps/ieee754/dbl-64/s_setpayload.c: New file. * sysdeps/ieee754/dbl-64/s_setpayload_main.c: Likewise. * sysdeps/ieee754/dbl-64/wordsize-64/s_setpayload_main.c: Likewise. * sysdeps/ieee754/flt-32/s_setpayloadf.c: Likewise. * sysdeps/ieee754/flt-32/s_setpayloadf_main.c: Likewise. * sysdeps/ieee754/ldbl-128/s_setpayloadl.c: Likewise. * sysdeps/ieee754/ldbl-128/s_setpayloadl_main.c: Likewise. * sysdeps/ieee754/ldbl-128ibm/s_setpayloadl.c: Likewise. * sysdeps/ieee754/ldbl-128ibm/s_setpayloadl_main.c: Likewise. * sysdeps/ieee754/ldbl-96/s_setpayloadl.c: Likewise. * sysdeps/ieee754/ldbl-96/s_setpayloadl_main.c: Likewise. * sysdeps/ieee754/ldbl-opt/nldbl-setpayload.c: Likewise. * sysdeps/ieee754/ldbl-opt/Makefile (libnldbl-calls): Add setpayload. (CFLAGS-nldbl-setpayload.c): New variable. * sysdeps/nacl/libm.abilist: Update. * sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise. |
|
|
Joseph Myers
|
f82a4bdb73 |
Add SNAN, SNANF, SNANL macros.
TS 18661-1 defines SNAN macros for signaling NaN values, suitable for use in static initializers. This patch adds them to glibc's <math.h> (provided you are building with GCC 3.3 or later; no attempt is made to provide any kind of nonconforming fallback for older compilers without the __builtin_nans functions). Tested for x86_64 and x86. * math/math.h [__GLIBC_USE (IEC_60559_BFP_EXT) && __GNUC_PREREQ (3, 3)] (SNANF): New macro. [__GLIBC_USE (IEC_60559_BFP_EXT) && __GNUC_PREREQ (3, 3)] (SNAN): Likewise. [__GLIBC_USE (IEC_60559_BFP_EXT) && __GNUC_PREREQ (3, 3)] (SNANL): Likewise. * manual/arith.texi (Infinity and NaN): Document SNANF, SNAN and SNANL. * math/test-double.h (snan_value_MACRO): New macro. * math/test-float.h (snan_value_MACRO): Likewise. * math/test-ldouble.h (snan_value_MACRO): Likewise. * math/libm-test.inc (issignaling_test_data): Add tests of snan_value_MACRO. |
|
|
Joseph Myers
|
eaf5ad0bc4 |
Add canonicalize, canonicalizef, canonicalizel.
TS 18661-1 defines canonicalize functions to produce a canonical version of a floating-point representation. This patch implements these functions for glibc. As with the iscanonical macro, these functions are oriented to the decimal floating-point case, where some values have both canonical and noncanonical representations. However, the functions have a return value that says whether they succeeded in storing a canonical result; thus, they can fail for the case of an invalid representation (while still not making any particular choice from among multiple equally canonical valid representations of the same value). Since no floating-point formats in glibc actually have noncanonical valid representations, a type-generic implementation of these functions can be used that expects iscanonical to return 0 only for invalid representations. Now that iscanonical is used within libm.so, libm_hidden_proto / libm_hidden_def are added for __iscanonicall. The definition of these functions is intended to correspond to a convertFormat operation to the same floating-point format. Thus, they convert signaling NaNs to quiet NaNs, raising the "invalid" exception. Such a conversion "should" produce "the canonical version of that signaling NaN made quiet". libm-test.inc is made to check NaN payloads for the output of these functions, a new feature (at some point manipulation functions such as fabs and copysign should have tests added that verify payload preservation for them). As however some architectures may not follow the recommended practice of preserving NaN payloads when converting a signaling NaN to quiet, a new math-tests.h macro SNAN_TESTS_PRESERVE_PAYLOAD is added, and defined to 0 for non-NAN2008 MIPS; any other architectures seeing test failures for lack of payload preservation in this case should also define this macro to 0. (If any cases arise where the sign isn't preserved either, those should have a similar macro added.) The ldbl-96 and ldbl-128ibm tests of iscanonical are renamed and adapted to test canonicalizel as well on the same representations. Tested for x86_64, x86, mips64 and powerpc. * math/bits/mathcalls.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (canonicalize): New declaration. * math/Versions (canonicalize): New libm symbol at version GLIBC_2.25. (canonicalizef): Likewise. (canonicalizel): Likewise. * math/Makefile (gen-libm-calls): Add s_canonicalizeF. * math/s_canonicalize_template.c: New file. * math/libm-test.inc: Update comment on functions tested and testing of NaN payloads. (TEST_NAN_PAYLOAD): New macro. (NO_TEST_INLINE): Update value. (XFAIL_TEST): Likewise. (ERRNO_UNCHANGED): Likewise. (ERRNO_EDOM): Likewise. (ERRNO_ERANGE): Likewise. (IGNORE_RESULT): Likewise. (NON_FINITE): Likewise. (TEST_SNAN): Likewise. (NO_TEST_MATHVEC): Likewise. (TEST_NAN_PAYLOAD_CANONICALIZE): New macro. (check_float_internal): Check NaN payloads if TEST_NAN_PAYLOAD. (struct test_Ffp_b1_data): New type. (RUN_TEST_Ffp_b1): New macro. (RUN_TEST_LOOP_Ffp_b1): Likewise. (canonicalize_test_data): New array. (canonicalize_test): New function. (main): Call canonicalize_test. * manual/arith.texi (FP Bit Twiddling): Document canonicalize, canonicalizef and canonicalizel. * manual/libm-err-tab.pl: Update comment on interfaces without ulps tabulated. * sysdeps/ieee754/ldbl-opt/nldbl-canonicalize.c: New file. * sysdeps/ieee754/ldbl-opt/s_canonicalizel.c: Likewise. * sysdeps/ieee754/ldbl-opt/Makefile (libnldbl-calls): Add canonicalize. (CFLAGS-nldbl-canonicalize.c): New variable. * sysdeps/ieee754/ldbl-128ibm/test-iscanonical-ldbl-128ibm.c: Move to ... * sysdeps/ieee754/ldbl-128ibm/test-canonical-ldbl-128ibm.c: ... here. (do_test): Also test canonicalizel. * sysdeps/ieee754/ldbl-128ibm/Makefile (tests): Change test-iscanonical-ldbl-128ibm to test-canonical-ldbl-128ibm. * sysdeps/ieee754/ldbl-128ibm/include/bits/iscanonical.h: New file. * sysdeps/ieee754/ldbl-128ibm/s_iscanonicall.c (__iscanonicall): Use libm_hidden_def. * sysdeps/ieee754/ldbl-96/test-iscanonical-ldbl-96.c: Move to ... * sysdeps/ieee754/ldbl-96/test-canonical-ldbl-96.c: ... here. (do_test): Also test canonicalizel. * sysdeps/ieee754/ldbl-96/Makefile (tests): Change test-iscanonical-ldbl-96 to test-canonical-ldbl-96. * sysdeps/ieee754/ldbl-96/include/bits/iscanonical.h: New file. * sysdeps/ieee754/ldbl-96/s_iscanonicall.c (__iscanonicall): Use libm_hidden_def. * sysdeps/generic/math-tests.h (SNAN_TESTS_PRESERVE_PAYLOAD): New macro. * sysdeps/mips/math-tests.h [__mips_hard_float && !__mips_nan2008] (SNAN_TESTS_PRESERVE_PAYLOAD): Likewise. * sysdeps/nacl/libm.abilist: Update. * sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise. |
|
|
Florian Weimer
|
e863cce57b |
malloc: Remove malloc_get_state, malloc_set_state [BZ #19473]
After the removal of __malloc_initialize_hook, newly compiled Emacs binaries are no longer able to use these interfaces. malloc_get_state is only used during the Emacs build process, so we provide a stub implementation only. Existing Emacs binaries will not call this stub function, but still reference the symbol. The rewritten tst-mallocstate test constructs a dumped heap which should approximates what existing Emacs binaries pass to glibc malloc. |
|
Gabriel F. T. Gomes
|
6962682ffe |
Add strfromd, strfromf, and strfroml functions
ISO/IEC TS 18661-1 adds several functions in the strfrom family to stdlib. This patch adds strfromd, strfromf, and strfroml. This is being done in preparation for the new floating-point type, float128. The added functions convert a floating-point value into a string, with configurable format. |
|
|
Joseph Myers
|
f8e8b8ed9f |
Add getpayload, getpayloadf, getpayloadl.
TS 18661-1 defines functions for manipulating the payloads of NaNs. This patch implements the getpayload functions for glibc; these extract the NaN payload (from an argument passed as a pointer, for which corresponding libm-test support is added) and return it in the same floating-point type. The return value of these functions is unspecified for non-NaN arguments; the patch does the simplest thing to implement, which is that the functions do not check whether the argument is a NaN and just treat the relevant bits of the representation as a payload regardless. A conversion from integer to floating-point is used to produce the required return value, except in the ldbl-128 case; as 128-bit integers are not supported for all configurations using ldbl-128, the code constructs the required floating-point representation of the return value directly instead. Tested for x86_64, x86, mips64 and powerpc. * math/bits/mathcalls.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (getpayload): New declaration. * math/Versions (getpayload): New libm symbol at version GLIBC_2.25. (getpayloadf): Likewise. (getpayloadl): Likewise. * math/Makefile (libm-calls): Add s_getpayloadF. * math/libm-test.inc: Include <nan-high-order-bit.h>. (struct test_f_f_data): Add comment. (RUN_TEST_fp_f): New macro. (RUN_TEST_LOOP_fp_f): Likewise. (getpayload_test_data): New array. (getpayload_test): New function. (main): Call getpayload_test. * math/gen-libm-test.pl (parse_args): Handle 'p' in argument descriptor. * manual/arith.texi (FP Bit Twiddling): Document getpayload, getpayloadf and getpayloadl. * manual/libm-err-tab.pl: Update comment on interfaces without ulps tabulated. * sysdeps/ieee754/dbl-64/s_getpayload.c: New file. * sysdeps/ieee754/dbl-64/wordsize-64/s_getpayload.c: Likewise. * sysdeps/ieee754/flt-32/s_getpayloadf.c: Likewise. * sysdeps/ieee754/ldbl-128/s_getpayloadl.c: Likewise. * sysdeps/ieee754/ldbl-128ibm/s_getpayloadl.c: Likewise. * sysdeps/ieee754/ldbl-96/s_getpayloadl.c: Likewise. * sysdeps/nacl/libm.abilist: Update. * sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise. |
|
|
Joseph Myers
|
cc6a8d7457 |
Add totalordermag, totalordermagf, totalordermagl.
In addition to the totalorder functions, TS 18661-1 defines totalordermag functions, which do the same comparison but on the absolute values of the arguments. This patch implements these functions for glibc, including the type-generic macro in <tgmath.h>. In general the implementations are similar to but simpler than those for the totalorder functions. Tested for x86_64, x86, mips64 and powerpc. * math/bits/mathcalls.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (totalordermag): New declaration. * math/tgmath.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (totalordermag): New macro. * math/Versions (totalordermag): New libm symbol at version GLIBC_2.25. (totalordermagf): Likewise. (totalordermagl): Likewise. * math/Makefile (libm-calls): Add s_totalordermagF. * math/libm-test.inc (totalordermag_test_data): New array. (totalordermag_test): New function. (main): Call totalordermag_test. * math/test-tgmath.c (NCALLS): Increase to 125. (F(compile_test)): Call totalordermag. (F(totalordermag)): New function. * manual/arith.texi (FP Comparison Functions): Document totalordermag, totalordermagf and totalordermagl. * manual/libm-err-tab.pl: Update comment on interfaces without ulps tabulated. * sysdeps/ieee754/dbl-64/s_totalordermag.c: New file. * sysdeps/ieee754/dbl-64/wordsize-64/s_totalordermag.c: Likewise. * sysdeps/ieee754/flt-32/s_totalordermagf.c: Likewise. * sysdeps/ieee754/ldbl-128/s_totalordermagl.c: Likewise. * sysdeps/ieee754/ldbl-128ibm/s_totalordermagl.c: Likewise. * sysdeps/ieee754/ldbl-96/s_totalordermagl.c: Likewise. * sysdeps/ieee754/ldbl-opt/nldbl-totalordermag.c: Likewise. * sysdeps/ieee754/ldbl-opt/Makefile (libnldbl-calls): Add totalordermag. (CFLAGS-nldbl-totalordermag.c): New variable. * sysdeps/ieee754/ldbl-128ibm/test-totalorderl-ldbl-128ibm.c (do_test): Also test totalordermagl. * sysdeps/ieee754/ldbl-96/test-totalorderl-ldbl-96.c (do_test): Likewise. * sysdeps/nacl/libm.abilist: Update. * sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise. |
|
|
Joseph Myers
|
5e9d98a3d9 |
Add totalorder, totalorderf, totalorderl.
TS 18661-1 defines totalorder functions implementing the totalOrder comparison operation from IEEE 754-2008. This patch implements these functions for glibc, including the type-generic macro in <tgmath.h>. (The totalordermag functions will be added in a separate patch.) The description of the totalOrder operation is complicated. However, for IEEE interchange binary formats and the preferred quiet NaN convention, what that complicated description means is that you interpret the representation as a sign-magnitude integer (with -0 coming before +0) and do a <= comparison on that interpretation. For finite values and infinities the ordering of the sign-magnitude integers is just the same as the ordering of floating-point values, so this extends that to all representations. (Different representations of the same floating-point value - which includes same quantum in the decimal case - must still be considered equal by this operation, but that issue doesn't arise for IEEE interchange binary formats.) So the complications are: * When MIPS quiet NaN conventions are in use, the representation of NaNs needs adjusting before making such an integer comparison. This patch does this adjustment only when both arguments are NaNs, as there's no need for it if only one is a NaN, and as long as both are NaNs you can just flip the relevant bits without any problems from this turning a NaN into an infinity. * For the m68k version of ldbl-96, where the high mantissa bit is "don't care" for infinities and NaNs, representations where it differs must compare the same. Note: although the testcase for this compiles, I have not actually tested on m68k. * For ldbl-128ibm, the low part must be ignored when the high part is NaN, and low parts of +0 and -0 must be considered the same whatever the high part. The new tests in libm-test.inc are the first tests there specifying particular payloads for input NaNs. Separate tests are also added for the ldbl-96 and ldbl-128ibm special cases where there are different representations of the same value that must compare equal (which can't be covered in libm-test.inc as that only specifies values, not representations). Tested for x86_64, x86, mips64 and powerpc. * math/bits/mathcalls.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (totalorder): New declaration. * math/tgmath.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (totalorder): New macro. * math/Versions (totalorder): New libm symbol at version GLIBC_2.25. (totalorderf): Likewise. (totalorderl): Likewise. * math/Makefile (libm-calls): Add s_totalorderF. * math/gen-libm-test.pl (parse_args): Escape quotes in test name string. * math/libm-test.inc (PAYLOAD_DIG): New macro. (qnan_value_pl): Likewise. (snan_value_pl): Likewise. (qnan_value): Define using qnan_value_pl. (snan_value): Define using snan_value_pl. (struct test_ff_i_data): Add comment about which tests use this structure. (RUN_TEST_ff_b): New macro. (RUN_TEST_LOOP_ff_b): Likewise. (totalorder_test_data): New array. (totalorder_test): New function. (main): Call totalorder_test. * math/test-tgmath.c (NCALLS): Increase to 122. (F(compile_test)): Call totalorder. (F(totalorder)): New function. * manual/arith.texi (FP Comparison Functions): Document totalorder, totalorderf and totalorderl. * manual/libm-err-tab.pl: Update comment on interfaces without ulps tabulated. * sysdeps/ieee754/dbl-64/s_totalorder.c: New file. * sysdeps/ieee754/dbl-64/wordsize-64/s_totalorder.c: Likewise. * sysdeps/ieee754/flt-32/s_totalorderf.c: Likewise. * sysdeps/ieee754/ldbl-128/s_totalorderl.c: Likewise. * sysdeps/ieee754/ldbl-128ibm/s_totalorderl.c: Likewise. * sysdeps/ieee754/ldbl-96/s_totalorderl.c: Likewise. * sysdeps/ieee754/ldbl-opt/nldbl-totalorder.c: Likewise. * sysdeps/ieee754/ldbl-opt/Makefile (libnldbl-calls): Add totalorder. (CFLAGS-nldbl-totalorder.c): New variable. * sysdeps/ieee754/ldbl-128ibm/test-totalorderl-ldbl-128ibm.c: New file. * sysdeps/ieee754/ldbl-128ibm/Makefile [$(subdir) = math] (tests): Add test-totalorderl-ldbl-128ibm. * sysdeps/ieee754/ldbl-96/test-totalorderl-ldbl-96.c: New file. * sysdeps/ieee754/ldbl-96/Makefile [$(subdir) = math] (tests): Add test-totalorderl-ldbl-96. * sysdeps/nacl/libm.abilist: Update. * sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise. |
|
|
Florian Weimer
|
5140d036f9 |
resolv: Remove RES_USEBSTRING and its implementation [BZ #20629]
In ns_name_ntop, the NS_CMPRSFLGS check is no longer needed because labellen (called earlier) already rejects everything which is not a plain label (compression references and extended label types). |
|
|
Florian Weimer
|
7ec47a85d8 | resolv: Remove RES_NOIP6DOTINT and its implementation | |
|
Florian Weimer
|
bfbd1de159 |
resolv: Deprecate unimplemented flags
RES_AAONLY, RES_PRIMARY, RES_NOCHECKNAME, RES_KEEPTSIG result in compile-time warnings. Some of these flags are still used in applications. |
|
|
Stefan Liebler
|
022dfdce00 |
Add configure check to test if gcc supports attribute ifunc.
This patch adds a configure check to test if gcc supports attribute ifunc. The support can either be enabled in <gcc-src>/gcc/config.gcc for one architecture in general by setting default_gnu_indirect_function variable to yes or by configuring gcc with --enable-gnu-indirect-function. The next patch rewrites libc_ifunc macro to use gcc attribute ifunc instead of inline assembly to generate the IFUNC symbols due to false debuginfo. If gcc does not support attribute ifunc, the old approach for generating ifunc'ed symbols is used. Then the debug-information is false. Thus it is recommended to use a gcc with indirect function support (See notes in INSTALL). After this patch-series these inline assemblies for ifunc-handling are not scattered in multiple files but are used only indirect via ifunc-macros and can simply removed in libc-symbols.h in future. If glibc is configured with --enable-multi-arch and gcc does not support attribute ifunc, a configure warning is dumped! ChangeLog: * config.h.in (HAVE_GCC_IFUNC): New undef. * configure.ac: Add check if gcc supports attribute ifunc feature. * configure: Regenerated. * manual/install.texi: Add recommendation for gcc with indirect-function support. * INSTALL: Regenerated. |
|
|
Joseph Myers
|
1e7c8fcca5 |
Add iseqsig.
TS 18661-1 adds an iseqsig type-generic comparison macro to <math.h>. This macro is like the == operator except that unordered operands result in the "invalid" exception and errno being set to EDOM. This patch implements this macro for glibc. Given the need to set errno, this is implemented with out-of-line functions __iseqsigf, __iseqsig and __iseqsigl (of which the last only exists at all if long double is ABI-distinct from double, so no function aliases or compat support are needed). The present patch ignores excess precision issues; I intend to deal with those in a followup patch. (Like comparison operators, type-generic comparison macros should *not* convert operands to their semantic types but should preserve excess range and precision, meaning that for some argument types and values of FLT_EVAL_METHOD, an underlying function should be called for a wider type than that of the arguments.) The underlying functions are implemented with the type-generic template machinery. Comparing x <= y && x >= y is sufficient in ISO C to achieve an equality comparison with "invalid" raised for unordered operands (and the results of those two comparisons can also be used to tell whether errno needs to be set). However, some architectures have GCC bugs meaning that unordered comparison instructions are used instead of ordered ones. Thus, a mechanism is provided for architectures to use an explicit call to feraiseexcept to raise exceptions if required. If your architecture has such a bug you should add a fix-fp-int-compare-invalid.h header for it, with a comment pointing to the relevant GCC bug report; if such a GCC bug is fixed, that header's contents should have a __GNUC_PREREQ conditional added so that the workaround can eventually be removed for that architecture. Tested for x86_64, x86, mips64, arm and powerpc. * math/math.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (iseqsig): New macro. * math/bits/mathcalls.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (__iseqsig): New declaration. * math/s_iseqsig_template.c: New file. * math/Versions (__iseqsigf): New libm symbol at version GLIBC_2.25. (__iseqsig): Likewise. (__iseqsigl): Likewise. * math/libm-test.inc (iseqsig_test_data): New array. (iseqsig_test): New function. (main): Call iseqsig_test. * math/Makefile (gen-libm-calls): Add s_iseqsigF. * manual/arith.texi (FP Comparison Functions): Document iseqsig. * manual/libm-err-tab.pl: Update comment on interfaces without ulps tabulated. * sysdeps/generic/fix-fp-int-compare-invalid.h: New file. * sysdeps/powerpc/fpu/fix-fp-int-compare-invalid.h: Likewise. * sysdeps/x86/fpu/fix-fp-int-compare-invalid.h: Likewise. * sysdeps/nacl/libm.abilist: Update. * sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise. |
|
|
Joseph Myers
|
29cb929332 |
Add iscanonical.
TS 18661-1 adds an iscanonical classification macro to <math.h>. The motivation for this is decimal floating-point, where some values have both canonical and noncanonical encodings. For IEEE binary interchange formats, all encodings are canonical. For x86/m68k ldbl-96, and for ldbl-128ibm, there are encodings that do not represent any valid value of the type; although formally iscanonical does not need to handle trap representations (and so could just always return 1), it seems useful, and in line with the description in the TS of "representations that are extraneous to the floating-point model" as being non-canonical (as well as "redundant representations of some or all of its values"), for it to detect those representations and return 0 for them. This patch adds iscanonical to glibc. It goes in a header <bits/iscanonical.h>, included under appropriate conditions in <math.h>. The default header version just evaluates the argument (converted to its semantic type, though current GCC will probably discard that conversion and any exceptions resulting from it) and returns 1. ldbl-96 and ldbl-128ibm then have versions of the header that call a function __iscanonicall for long double (the sizeof-based tests will of course need updating for float128 support, like other such type-generic macro implementations). The ldbl-96 version of __iscanonicall has appropriate conditionals to reflect the differences in the m68k version of that format (where the high mantissa bit may be either 0 or 1 when the exponent is 0 or 0x7fff). Corresponding tests for those formats are added as well. Other architectures do not have any new functions added because just returning 1 is correct for all their floating-point formats. Tested for x86_64, x86, mips64 (to test the default macro version) and powerpc. * math/math.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Include <bits/iscanonical.h>. * bits/iscanonical.h: New file. * math/s_iscanonicall.c: Likewise. * math/Versions (__iscanonicall): New libm symbol at version GLIBC_2.25. * math/libm-test.inc (iscanonical_test_data): New array. (iscanonical_test): New function. (main): Call iscanonical_test. * math/Makefile (headers): Add bits/iscanonical.h. (type-ldouble-routines): Add s_iscanonicall. * manual/arith.texi (Floating Point Classes): Document iscanonical. * manual/libm-err-tab.pl: Update comment on interfaces without ulps tabulated. * sysdeps/ieee754/ldbl-128ibm/bits/iscanonical.h: New file. * sysdeps/ieee754/ldbl-128ibm/s_iscanonicall.c: Likewise. * sysdeps/ieee754/ldbl-128ibm/test-iscanonical-ldbl-128ibm.c: Likewise. * sysdeps/ieee754/ldbl-128ibm/Makefile (tests): Add test-iscanonical-ldbl-128ibm. * sysdeps/ieee754/ldbl-96/bits/iscanonical.h: New file. * sysdeps/ieee754/ldbl-96/s_iscanonicall.c: Likewise. * sysdeps/ieee754/ldbl-96/test-iscanonical-ldbl-96.c: Likewise. * sysdeps/ieee754/ldbl-96/Makefile: Likewise. * sysdeps/unix/sysv/linux/i386/libm.abilist: Update. * sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise. |
|
|
Joseph Myers
|
bb8081f57f |
Add iszero.
TS 18661-1 adds an iszero classification macro to <math.h>. This patch implements it for glibc. There are no new underlying functions in libm because the implementation uses fpclassify when sNaN support is required and a direct comparison otherwise; any optimizations for this macro should be done through adding __builtin_iszero in GCC and using it in the header for suitable GCC versions, not through adding other optimized inline or out-of-line versions to glibc. Tested for x86_64 and x86. * math/math.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (iszero): New macro. * math/libm-test.inc (iszero_test_data): New array. (iszero_test): New function. (main): Call iszero_test. * manual/arith.texi (Floating Point Classes): Document iszero. * manual/libm-err-tab.pl: Update comment on interfaces without ulps tabulated. |
|
|
Joseph Myers
|
d942e95cd7 |
Add issubnormal.
TS 18661-1 adds an issubnormal classification macro to <math.h>. This patch implements it for glibc. There are no new underlying functions in libm because the implementation uses fpclassify; any optimizations for this macro should be done through adding __builtin_subnormal in GCC and using it in the header for suitable GCC versions, not through adding other optimized inline or out-of-line versions to glibc. The intended structure of the NEWS entry for <math.h> features from TS 18661-1 is like: * New <math.h> features are added from TS 18661-1:2014: - Nearest integer functions: roundeven, roundevenf, roundevenl. - Comparison macros: iseqsig. - Classification macros: iscanonical, issubnormal, iszero. (that is, following the grouping of interfaces in TS 18661-1:2014, with any group where any interfaces are new in glibc 2.25 being listed like that). Tested for x86_64 and x86. * math/math.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (issubnormal): New macro. * math/libm-test.inc (issubnormal_test_data): New array. (issubnormal_test): New function. * manual/arith.texi (Floating Point Classes): Document issubnormal. * manual/libm-err-tab.pl: Update comment on interfaces without ulps tabulated. |
|
|
Joseph Myers
|
5b17fd0da6 |
Add <stdint.h> integer width macros.
TS 18661-1 defines macros for the width of integer types, intended for use with the fromfp functions to convert from floating-point types to integer types of any width, in any rounding mode and with control over whether "inexact" is raised. Such macros are, of course, more generally useful than just with those functions. Those macros are added to <limits.h> and <stdint.h>. Having previously added the <limits.h> macros, this patch adds the <stdint.h> ones. I've also added these macros to GCC's headers for GCC 7, but for glibc systems, the definitions in GCC's <stdint.h> will only be used with -ffreestanding. Tested for x86_64 and x86. * sysdeps/generic/stdint.h: Define __GLIBC_INTERNAL_STARTING_HEADER_IMPLEMENTATION and include <bits/libc-header-start.h> instead of including <features.h>. [__GLIBC_USE (IEC_60559_BFP_EXT)] (INT8_WIDTH): New macro. [__GLIBC_USE (IEC_60559_BFP_EXT)] (UINT8_WIDTH): Likewise. [__GLIBC_USE (IEC_60559_BFP_EXT)] (INT16_WIDTH): Likewise. [__GLIBC_USE (IEC_60559_BFP_EXT)] (UINT16_WIDTH): Likewise. [__GLIBC_USE (IEC_60559_BFP_EXT)] (INT32_WIDTH): Likewise. [__GLIBC_USE (IEC_60559_BFP_EXT)] (UINT32_WIDTH): Likewise. [__GLIBC_USE (IEC_60559_BFP_EXT)] (INT64_WIDTH): Likewise. [__GLIBC_USE (IEC_60559_BFP_EXT)] (UINT64_WIDTH): Likewise. [__GLIBC_USE (IEC_60559_BFP_EXT)] (INT_LEAST8_WIDTH): Likewise. [__GLIBC_USE (IEC_60559_BFP_EXT)] (UINT_LEAST8_WIDTH): Likewise. [__GLIBC_USE (IEC_60559_BFP_EXT)] (INT_LEAST16_WIDTH): Likewise. [__GLIBC_USE (IEC_60559_BFP_EXT)] (UINT_LEAST16_WIDTH): Likewise. [__GLIBC_USE (IEC_60559_BFP_EXT)] (INT_LEAST32_WIDTH): Likewise. [__GLIBC_USE (IEC_60559_BFP_EXT)] (UINT_LEAST32_WIDTH): Likewise. [__GLIBC_USE (IEC_60559_BFP_EXT)] (INT_LEAST64_WIDTH): Likewise. [__GLIBC_USE (IEC_60559_BFP_EXT)] (UINT_LEAST64_WIDTH): Likewise. [__GLIBC_USE (IEC_60559_BFP_EXT)] (INT_FAST8_WIDTH): Likewise. [__GLIBC_USE (IEC_60559_BFP_EXT)] (UINT_FAST8_WIDTH): Likewise. [__GLIBC_USE (IEC_60559_BFP_EXT)] (INT_FAST16_WIDTH): Likewise. [__GLIBC_USE (IEC_60559_BFP_EXT)] (UINT_FAST16_WIDTH): Likewise. [__GLIBC_USE (IEC_60559_BFP_EXT)] (INT_FAST32_WIDTH): Likewise. [__GLIBC_USE (IEC_60559_BFP_EXT)] (UINT_FAST32_WIDTH): Likewise. [__GLIBC_USE (IEC_60559_BFP_EXT)] (INT_FAST64_WIDTH): Likewise. [__GLIBC_USE (IEC_60559_BFP_EXT)] (UINT_FAST64_WIDTH): Likewise. [__GLIBC_USE (IEC_60559_BFP_EXT)] (INTPTR_WIDTH): Likewise. [__GLIBC_USE (IEC_60559_BFP_EXT)] (UINTPTR_WIDTH): Likewise. [__GLIBC_USE (IEC_60559_BFP_EXT)] (INTMAX_WIDTH): Likewise. [__GLIBC_USE (IEC_60559_BFP_EXT)] (UINTMAX_WIDTH): Likewise. [__GLIBC_USE (IEC_60559_BFP_EXT)] (PTRDIFF_WIDTH): Likewise. [__GLIBC_USE (IEC_60559_BFP_EXT)] (SIG_ATOMIC_WIDTH): Likewise. [__GLIBC_USE (IEC_60559_BFP_EXT)] (SIZE_WIDTH): Likewise. [__GLIBC_USE (IEC_60559_BFP_EXT)] (WCHAR_WIDTH): Likewise. [__GLIBC_USE (IEC_60559_BFP_EXT)] (WINT_WIDTH): Likewise. * manual/arith.texi (Integers): Document these macros for types specified by width properties. * manual/lang.texi (Width of Type): Document these macros for other standard typedefs. * stdlib/tst-width-stdint.c: New file. * stdlib/Makefile (tests): Add tst-width-stdint. |
|
|
Florian Weimer
|
6815a33d53 | resolv: Remove unsupported hook functions from the API [BZ #20016] | |
|
Florian Weimer
|
be728303a6 |
<arpa/nameser.h>: Remove RR type classification macros [BZ #20592]
The macros are no longer up-to-date, and the classification is not useful. In this particular case, removal without prior deprecation seems the right approach. |
|
|
Florian Weimer
|
3a2a1d2cc2 |
Remove obsolete DNSSEC support [BZ #20591]
The removed function declaration have never been implemented in libresolv. |
|
|
Joseph Myers
|
a292f45acd |
Add <limits.h> integer width macros.
TS 18661-1 defines macros for the width of integer types, intended for use with the fromfp functions to convert from floating-point types to integer types of any width, in any rounding mode and with control over whether "inexact" is raised. Such macros are, of course, more generally useful than just with those functions. Those macros are added to <limits.h> and <stdint.h>. This patch adds the <limits.h> macros to glibc's header, with the <stdint.h> ones intended to be added in a separate patch (which would add to the NEWS entry created by this patch). I've also added these macros to GCC's headers for GCC 7, but definitions in glibc's <limits.h> are still useful for older GCC, for non-GNU compilers and for when it's _GNU_SOURCE rather than __STDC_WANT_IEC_60559_BFP_EXT__ that implies the macros should be defined since the GCC header only considers __STDC_WANT_IEC_60559_BFP_EXT__ (and for glibc systems, the definitions in GCC's <stdint.h> will only be used with -ffreestanding). Tested for x86_64 and x86. * include/limits.h: Define __GLIBC_INTERNAL_STARTING_HEADER_IMPLEMENTATION and include <bits/libc-header-start.h> instead of including <features.h>. [__GLIBC_USE (IEC_60559_BFP_EXT)] (CHAR_WIDTH): New macro. [__GLIBC_USE (IEC_60559_BFP_EXT)] (SCHAR_WIDTH): Likewise. [__GLIBC_USE (IEC_60559_BFP_EXT)] (UCHAR_WIDTH): Likewise. [__GLIBC_USE (IEC_60559_BFP_EXT)] (SHRT_WIDTH): Likewise. [__GLIBC_USE (IEC_60559_BFP_EXT)] (USHRT_WIDTH): Likewise. [__GLIBC_USE (IEC_60559_BFP_EXT)] (INT_WIDTH): Likewise. [__GLIBC_USE (IEC_60559_BFP_EXT)] (UINT_WIDTH): Likewise. [__GLIBC_USE (IEC_60559_BFP_EXT)] (LONG_WIDTH): Likewise. [__GLIBC_USE (IEC_60559_BFP_EXT)] (ULONG_WIDTH): Likewise. [__GLIBC_USE (IEC_60559_BFP_EXT)] (LLONG_WIDTH): Likewise. [__GLIBC_USE (IEC_60559_BFP_EXT)] (ULLONG_WIDTH): Likewise. * manual/lang.texi (Width of Type): Document these macros. * stdlib/tst-width.c: New file. * stdlib/Makefile (tests): Add tst-width. |
|
|
Joseph Myers
|
ec94343f59 |
Add femode_t functions.
TS 18661-1 defines a type femode_t to represent the set of dynamic floating-point control modes (such as the rounding mode and trap enablement modes), and functions fegetmode and fesetmode to manipulate those modes (without affecting other state such as the raised exception flags) and a corresponding macro FE_DFL_MODE. This patch series implements those interfaces for glibc. This first patch adds the architecture-independent pieces, the x86 and x86_64 implementations, and the <bits/fenv.h> and ABI baseline updates for all architectures so glibc keeps building and passing the ABI tests on all architectures. Subsequent patches add the fegetmode and fesetmode implementations for other architectures. femode_t is generally an integer type - the same type as fenv_t, or as the single element of fenv_t where fenv_t is a structure containing a single integer (or the single relevant element, where it has elements for both status and control registers) - except where architecture properties or consistency with the fenv_t implementation indicate otherwise. FE_DFL_MODE follows FE_DFL_ENV in whether it's a magic pointer value (-1 cast to const femode_t *), a value that can be distinguished from valid pointers by its high bits but otherwise contains a representation of the desired register contents, or a pointer to a constant variable (the powerpc case; __fe_dfl_mode is added as an exported constant object, an alias to __fe_dfl_env). Note that where architectures (that share a register between control and status bits) gain definitions of new floating-point control or status bits in future, the implementations of fesetmode for those architectures may need updating (depending on whether the new bits are control or status bits and what the implementation does with previously unknown bits), just like existing implementations of <fenv.h> functions that take care not to touch reserved bits may need updating when the set of reserved bits changes. (As any new bits are outside the scope of ISO C, that's just a quality-of-implementation issue for supporting them, not a conformance issue.) As with fenv_t, femode_t should properly include any software DFP rounding mode (and for both fenv_t and femode_t I'd consider that fragment of DFP support appropriate for inclusion in glibc even in the absence of the rest of libdfp; hardware DFP rounding modes should already be included if the definitions of which bits are status / control bits are correct). Tested for x86_64, x86, mips64 (hard float, and soft float to test the fallback version), arm (hard float) and powerpc (hard float, soft float and e500). Other architecture versions are untested. * math/fegetmode.c: New file. * math/fesetmode.c: Likewise. * sysdeps/i386/fpu/fegetmode.c: Likewise. * sysdeps/i386/fpu/fesetmode.c: Likewise. * sysdeps/x86_64/fpu/fegetmode.c: Likewise. * sysdeps/x86_64/fpu/fesetmode.c: Likewise. * math/fenv.h: Update comment on inclusion of <bits/fenv.h>. [__GLIBC_USE (IEC_60559_BFP_EXT)] (fegetmode): New function declaration. [__GLIBC_USE (IEC_60559_BFP_EXT)] (fesetmode): Likewise. * bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (femode_t): New typedef. [__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro. * sysdeps/aarch64/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (femode_t): New typedef. [__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro. * sysdeps/alpha/fpu/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (femode_t): New typedef. [__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro. * sysdeps/arm/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (femode_t): New typedef. [__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro. * sysdeps/hppa/fpu/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (femode_t): New typedef. [__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro. * sysdeps/ia64/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (femode_t): New typedef. [__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro. * sysdeps/m68k/fpu/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (femode_t): New typedef. [__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro. * sysdeps/microblaze/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (femode_t): New typedef. [__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro. * sysdeps/mips/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (femode_t): New typedef. [__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro. * sysdeps/nios2/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (femode_t): New typedef. [__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro. * sysdeps/powerpc/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (femode_t): New typedef. [__GLIBC_USE (IEC_60559_BFP_EXT)] (__fe_dfl_mode): New variable declaration. [__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro. * sysdeps/s390/fpu/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (femode_t): New typedef. [__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro. * sysdeps/sh/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (femode_t): New typedef. [__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro. * sysdeps/sparc/fpu/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (femode_t): New typedef. [__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro. * sysdeps/tile/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (femode_t): New typedef. [__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro. * sysdeps/x86/fpu/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (femode_t): New typedef. [__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro. * manual/arith.texi (FE_DFL_MODE): Document macro. (fegetmode): Document function. (fesetmode): Likewise. * math/Versions (fegetmode): New libm symbol at version GLIBC_2.25. (fesetmode): Likewise. * math/Makefile (libm-support): Add fegetmode and fesetmode. (tests): Add test-femode and test-femode-traps. * math/test-femode-traps.c: New file. * math/test-femode.c: Likewise. * sysdeps/powerpc/fpu/fenv_const.c (__fe_dfl_mode): Declare as alias for __fe_dfl_env. * sysdeps/powerpc/nofpu/fenv_const.c (__fe_dfl_mode): Likewise. * sysdeps/powerpc/powerpc32/e500/nofpu/fenv_const.c (__fe_dfl_mode): Likewise. * sysdeps/powerpc/Versions (__fe_dfl_mode): New libm symbol at version GLIBC_2.25. * sysdeps/nacl/libm.abilist: Update. * sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise. |
|
|
Florian Weimer
|
4d728087ef |
Base <sys/quota.h> on Linux kernel headers [BZ #20525]
Macros which are also defined in <linux/quota.h> are removed, and <linux/quota.h> is included instead. This commit cleans up the definition of fs_to_dq_blocks and struct dqblock and struct dqinfo, too. |
|
|
Joseph Myers
|
780257d48d |
Add fetestexceptflag.
TS 18661-1 defines an fetestexceptflag function to test the exception state saved in an fexcept_t object by fegetexceptflag. This patch implements this function for glibc. Almost all architectures save exception state in such a way that it can be directly ANDed with exception flag bits, so rather than having lots of fetestexceptflag implementations that all do the same thing, the math/ implementation is made to use this generic logic (which is also OK in the fallback case where FE_ALL_EXCEPT is zero). The only architecture that seems to need anything different is s390. (fegetexceptflag and fesetexceptflag use abbreviated filenames fgetexcptflg.c and fsetexcptflg.c. Because we are no longer concerned by 14-character filename limits, fetestexceptflag uses the obvious filename fetestexceptflag.c.) The NEWS entry is intended to be expanded along the lines given in <https://sourceware.org/ml/libc-alpha/2016-08/msg00356.html> when fegetmode and fesetmode are added. Tested for x86_64, x86, mips64 and powerpc. * math/fetestexceptflag.c: New file. * sysdeps/s390/fpu/fetestexceptflag.c: Likewise. Comment by Stefan Liebler. * math/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (fetestexceptflag): New function declaration. * manual/arith.texi (fetestexceptflag): Document function. * math/Versions (fetestexceptflag): New libm symbol at version GLIBC_2.25. * math/Makefile (libm-support): Add fetestexceptflag. (tests): Add test-fetestexceptflag. * math/test-fetestexceptflag.c: New file. * sysdeps/nacl/libm.abilist: Update. * sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise. |
|
|
Joseph Myers
|
5146356f5a |
Add fesetexcept.
TS 18661-1 defines an fesetexcept function for setting floating-point exception flags without the side-effect of causing enabled traps to be taken. This patch series implements this function for glibc. The present patch adds the fallback stub implementation, x86 and x86_64 implementations, documentation, tests and ABI baseline updates. The remaining patches, some of them untested, add implementations for other architectures. The implementations generally follow those of the fesetexceptflag function. As for fesetexceptflag, the approach taken for architectures where setting flags causes enabled traps to be taken is to set the flags (and potentially cause traps) rather than refusing to set the flags and returning an error. Since ISO C and TS 18661 provide no way to enable traps, this is formally in accordance with the standards. The NEWS entry should be considered a placeholder, since this patch series is intended to be followed by further such series adding other TS 18661-1 features, so that the NEWS entry would end up looking more like * New <fenv.h> features from TS 18661-1:2014 are added to libm: the fesetexcept, fetestexceptflag, fegetmode and fesetmode functions, the femode_t type and the FE_DFL_MODE macro. with hopefully more such entries for other features, rather than having an entry for a single function in the end. I believe we have consensus for adding TS 18661-1 interfaces as per <https://sourceware.org/ml/libc-alpha/2016-06/msg00421.html>. Tested for x86_64, x86, mips64 (hard float, and soft float to test the fallback version), arm (hard float) and powerpc (hard float, soft float and e500). * math/fesetexcept.c: New file. * sysdeps/i386/fpu/fesetexcept.c: Likewise. * sysdeps/x86_64/fpu/fesetexcept.c: Likewise. * math/fenv.h: Define __GLIBC_INTERNAL_STARTING_HEADER_IMPLEMENTATION and include <bits/libc-header-start.h> instead of including <features.h>. [__GLIBC_USE (IEC_60559_BFP_EXT)] (fesetexcept): New function declaration. * manual/arith.texi (fesetexcept): Document function. * math/Versions (fesetexcept): New libm symbol at version GLIBC_2.25. * math/Makefile (libm-support): Add fesetexcept. (tests): Add test-fesetexcept and test-fesetexcept-traps. * math/test-fesetexcept.c: New file. * math/test-fesetexcept-traps.c: Likewise. * sysdeps/nacl/libm.abilist: Update. * sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise. |
|
|
Florian Weimer
|
056dd72af8 | Add CVE-2016-6323 missing from NEWS entry | |
|
Florian Weimer
|
4d047efdbc | Add NEWS entry for CVE-2016-6323 | |
|
Joseph Myers
|
412cb261b0 |
Support __STDC_WANT_IEC_60559_FUNCS_EXT__ feature test macro.
This patch implements support for the __STDC_WANT_IEC_60559_FUNCS_EXT__ feature test macro, following the __GLIBC_USE approach used for other ISO C feature test macros. Currently this only affects the exp10 functions (which glibc has had for a long time). Tested for x86_64 and x86 (testsuite, and that installed stripped shared libraries are unchanged by the patch). * bits/libc-header-start.h (__GLIBC_USE_IEC_60559_FUNCS_EXT): New macro. * include/features.h (__STDC_WANT_IEC_60559_FUNCS_EXT__): Document. * manual/creature.texi (__STDC_WANT_IEC_60559_FUNCS_EXT__): Document macro. * manual/math.texi (exp10): Document as ISO from TS 18661-4:2015. (exp10f): Likewise. (exp10l): Likewise. * math/bits/mathcalls.h (exp10): Declare if [__GLIBC_USE (IEC_60559_FUNCS_EXT)], not [__USE_GNU]. |
|
|
Zack Weinberg
|
dbab6577c6 |
Deprecate inclusion of <sys/sysmacros.h> by <sys/types.h>
The macros defined by <sys/sysmacros.h> are not part of POSIX nor XSI, and their names frequently collide with user code; see for instance glibc bug 19239 and Red Hat bug 130601. <stdlib.h> includes <sys/types.h> under _GNU_SOURCE, and C++ code presently cannot avoid being compiled under _GNU_SOURCE, exacerbating the problem. * NEWS: Inclusion of <sys/sysmacros.h> by <sys/types.h> is deprecated. * misc/sys/sysmacros.h: If __SYSMACROS_DEPRECATED_INCLUSION is defined, define major, minor, and makedev to issue deprecation warnings on use. If __SYSMACROS_DEPRECATED_INCLUSION is *not* defined, suppress previously-activated deprecation warnings for these macros and prevent subsequent inclusions of this header from having any effect. * posix/sys/types.h: Define __SYSMACROS_DEPRECATED_INCLUSION before including <sys/sysmacros.h>, and undefine it again afterward. |
|
|
Joseph Myers
|
bf91be88ea |
Support __STDC_WANT_IEC_60559_BFP_EXT__ feature test macro.
This patch implements support for the __STDC_WANT_IEC_60559_BFP_EXT__ feature test macro from ISO/IEC 18661-1:2014, following the __GLIBC_USE approach now used for __STDC_WANT_LIB_EXT2__. For this macro, the relevant consideration is whether it is defined or undefined when an affected header is included (not what its value is if defined, and not whether it's defined or undefined when any other unaffected system header is included). Currently this macro only affects the issignaling macro and the nextup and nextdown functions (so they can be enabled by defining this macro, not just by defining _GNU_SOURCE as previously). Any further features from this TS added in future would also be conditioned on this macro. Tested for x86_64 and x86 (testsuite, and that installed stripped shared libraries are unchanged by the patch). * bits/libc-header-start.h (__GLIBC_USE_IEC_60559_BFP_EXT): New macro. * include/features.h (__STDC_WANT_IEC_60559_BFP_EXT__): Document. * manual/arith.texi (issignaling): Document as ISO from TS 18661-1:2014. (nextup): Likewise. (nextupf): Likewise. (nextupl): Likewise. (nextdown): Likewise. (nextdownf): Likewise. (nextdownl): Likewise. * manual/creature.texi (__STDC_WANT_IEC_60559_BFP_EXT__): Document macro. * math/math.h: Define __GLIBC_INTERNAL_STARTING_HEADER_IMPLEMENTATION and include <bits/libc-header-start.h> instead of including <features.h>. (issignaling): Define if [__GLIBC_USE (IEC_60559_BFP_EXT)], not [__USE_GNU]. * math/bits/mathcalls.h (nextdown): Declare if [__GLIBC_USE (IEC_60559_BFP_EXT)], not [__USE_GNU]. (nextup): Likewise. (__issignaling): Likewise. |
|
|
Joseph Myers
|
487890009e |
Support __STDC_WANT_LIB_EXT2__ feature test macro.
This patch implements support for the __STDC_WANT_LIB_EXT2__ feature test macro from ISO/IEC TR 24731-2:2010, thereby implementing one possible approach for supporting ISO C feature test macros. Recall that, as described in <https://sourceware.org/ml/libc-alpha/2016-05/msg00486.html>, these macros work based on the definition when affected headers are included, so cannot be handled once when the first system header is included because that might not be one of the headers the particular macro in question affects. <https://sourceware.org/ml/libc-alpha/2016-05/msg00680.html> expresses views on possible approaches for implementation and <https://sourceware.org/ml/libc-alpha/2016-06/msg00039.html> follows up on that. This patch arranges things so that the relevant condition is __GLIBC_USE (LIB_EXT2), following one of the suggestions given. Headers using these macros include <bits/libc-header-start.h>, which in turn includes <features.h>. Headers must define __GLIBC_INTERNAL_STARTING_HEADER_IMPLEMENTATION before including <bits/libc-header-start.h>, to discourage inclusion outside glibc as requested. __USE_GNU conditions on affected functions are changed to __GLIBC_USE (LIB_EXT2), while it's added as an additional alternative on the conditions for functions already enabled for some POSIX versions. It would be possible to convert existing __USE_* conditionals to __GLIBC_USE (with the relevant __GLIBC_USE_* being defined in <features.h> where __USE_* are presently defined), and so make them typo-proof (given -Wundef -Werror in glibc builds) because __GLIBC_USE is used with #if not #ifdef / #if defined. No attempt is made to enforce the rule about diagnosing different definitions of __STDC_WANT_LIB_EXT2__ when affected headers are included; such a diagnostic is incompatible with multiple-include guards on the affected headers, unless compiler extensions are added to support it. As previously noted, glibc does not implement all features from TR 24731-2:2010: the functions aswprintf vaswprintf getwdelim getwline are not in glibc, although they would be appropriate to add if someone wished to do so. But I think it makes sense to support the feature test macro if *any* of the controlled features are present in glibc. Tested for x86_64 and x86 (testsuite, and that installed stripped shared libraries are unchanged by the patch). * bits/libc-header-start.h: New file. * Makefile (headers): Add bits/libc-header-start.h. * include/features.h (__STDC_WANT_LIB_EXT2__): Document. (__GLIBC_USE): New macro. * libio/stdio.h: Define __GLIBC_INTERNAL_STARTING_HEADER_IMPLEMENTATION and include <bits/libc-header-start.h> instead of including <features.h>. (fmemopen): Declare also if [__GLIBC_USE (LIB_EXT2)]. (open_memstream): Likewise. (vasprintf): Declare if [__GLIBC_USE (LIB_EXT2)], not [__USE_GNU]. (__asprintf): Likewise. (asprintf): Likewise. (__getdelim): Declare also if [__GLIBC_USE (LIB_EXT2)]. (getdelim): Likewise. (getline): Likewise. * string/string.h: Define __GLIBC_INTERNAL_STARTING_HEADER_IMPLEMENTATION and include <bits/libc-header-start.h> instead of including <features.h>. (strdup): Declare also if [__GLIBC_USE (LIB_EXT2)] (strndup): Likewise. * wcsmbs/wchar.h: Define __GLIBC_INTERNAL_STARTING_HEADER_IMPLEMENTATION and include <bits/libc-header-start.h> instead of including <features.h>. (open_wmemstream): Declare also if [__GLIBC_USE (LIB_EXT2)]. * manual/creature.texi (__STDC_WANT_LIB_EXT2__): Document macro. |
|
Carlos O'Donell
|
e720d3d9fe | Open development for 2.25. | |
Carlos O'Donell
|
3c4f81eccc | Update libc.pot and NEWS. | |
|
Florian Weimer
|
fab382315a | CVE-2016-5417 was assigned to bug 19257 | |
|
Siddhesh Poyarekar
|
c10f90dcef |
Revert "Add pretty printers for the NPTL lock types"
This reverts commit
|
|
|
Martin Galvan
|
62ce266b0b |
Add pretty printers for the NPTL lock types
This patch adds pretty printers for the following NPTL types: - pthread_mutex_t - pthread_mutexattr_t - pthread_cond_t - pthread_condattr_t - pthread_rwlock_t - pthread_rwlockattr_t To load the pretty printers into your gdb session, do the following: python import sys sys.path.insert(0, '/path/to/glibc/build/nptl/pretty-printers') end source /path/to/glibc/source/pretty-printers/nptl-printers.py You can check which printers are registered and enabled by issuing the 'info pretty-printer' gdb command. Printers should trigger automatically when trying to print a variable of one of the types mentioned above. The printers are architecture-independent, and were manually tested on both the gdb CLI and Eclipse CDT. In order to work, the printers need to know the values of various flags that are scattered throughout pthread.h and pthreadP.h as enums and #defines. Since replicating these constants in the printers file itself would create a maintenance burden, I wrote a script called gen-py-const.awk that Makerules uses to extract the constants. This script is pretty much the same as gen-as-const.awk, except it doesn't cast the constant values to 'long' and is thorougly documented. The constants need only to be enumerated in a .pysym file, which is then referenced by a Make variable called gen-py-const-headers. As for the install directory, I discussed this with Mike Frysinger and Siddhesh Poyarekar, and we agreed that it can be handled in a separate patch, and it shouldn't block merging of this one. In addition, I've written a series of test cases for the pretty printers. Each lock type (mutex, condvar and rwlock) has two test programs, one for itself and other for its related 'attributes' object. Each test program in turn has a PExpect-based Python script that drives gdb and compares its output to the expected printer's. The tests run on the glibc host, which is assumed to have both gdb and PExpect; if either is absent the tests will fail with code 77 (UNSUPPORTED). For cross-testing you should use cross-test-ssh.sh as test-wrapper. I've tested the printers on both a native build and a cross build using a Beaglebone Black, with the build system's filesystem shared with the board through NFS. Finally, I've written a README that explains all this and more. Hopefully this should be good to go in now. Thanks. ChangeLog: 2016-07-04 Martin Galvan <martin.galvan@tallertechnologies.com> * Makeconfig (build-hardcoded-path-in-tests): Set to 'yes' for shared builds if tests-need-hardcoded-path is defined. (all-subdirs): Add pretty-printers. * Makerules ($(py-const)): New rule. * Rules (others): Add $(py-const), if defined. * nptl/Makefile (gen-py-const-headers): Define. * nptl/nptl-printers.py: New file. * nptl/nptl_lock_constants.pysym: Likewise. * pretty-printers/Makefile: Likewise. * pretty-printers/README: Likewise. * pretty-printers/test-condvar-attributes.c: Likewise. * pretty-printers/test-condvar-attributes.p: Likewise. * pretty-printers/test-condvar-printer.c: Likewise. * pretty-printers/test-condvar-printer.py: Likewise. * pretty-printers/test-mutex-attributes.c: Likewise. * pretty-printers/test-mutex-attributes.py: Likewise. * pretty-printers/test-mutex-printer.c: Likewise. * pretty-printers/test-mutex-printer.py: Likewise. * pretty-printers/test-rwlock-attributes.c: Likewise. * pretty-printers/test-rwlock-attributes.py: Likewise. * pretty-printers/test-rwlock-printer.c: Likewise. * pretty-printers/test-rwlock-printer.py: Likewise. * pretty-printers/test_common.py: Likewise. * scripts/gen-py-const.awk: Likewise. |
|
Rajalakshmi Srinivasaraghavan
|
41a359e22f |
Add nextup and nextdown math functions
TS 18661 adds nextup and nextdown functions alongside nextafter to provide support for float128 equivalent to it. This patch adds nextupl, nextup, nextupf, nextdownl, nextdown and nextdownf to libm before float128 support. The nextup functions return the next representable value in the direction of positive infinity and the nextdown functions return the next representable value in the direction of negative infinity. These are currently enabled as GNU extensions. |
|
Mike Frysinger
|
b7a9b7b05b | NEWS: clarify localedef --old-style update | |
Marko Myllynen
|
6a54bcda7a |
localedef: drop unused --old-style
The --old-style option for localedef is a no-op and has been for 16 years. Delete the code. |
|
|
Florian Weimer
|
2ba3cfa160 |
malloc: Remove __malloc_initialize_hook from the API [BZ #19564]
__malloc_initialize_hook is interposed by application code, so the usual approach to define a compatibility symbol does not work. This commit adds a new mechanism based on #pragma GCC poison in <stdc-predef.h>. |
|
|
Florian Weimer
|
bc779a1a5b |
CVE-2016-4429: sunrpc: Do not use alloca in clntudp_call [BZ #20112]
The call is technically in a loop, and under certain circumstances (which are quite difficult to reproduce in a test case), alloca can be invoked repeatedly during a single call to clntudp_call. As a result, the available stack space can be exhausted (even though individual alloca sizes are bounded implicitly by what can fit into a UDP packet, as a side effect of the earlier successful send operation). |
|
|
Florian Weimer
|
5171f3079f |
CVE-2016-1234: glob: Do not copy d_name field of struct dirent [BZ #19779]
Instead, we store the data we need from the return value of readdir in an object of the new type struct readdir_result. This type is independent of the layout of struct dirent. |
|
Stephen Gallagher
|
ced8f89336 |
NSS: Implement group merging support.
https://sourceware.org/glibc/wiki/Proposals/GroupMerging == Justification == It is common today for users to rely on centrally-managed user stores for handling their user accounts. However, much software existing today does not have an innate understanding of such accounts. Instead, they commonly rely on membership in known groups for managing access-control (for example the "wheel" group on Fedora and RHEL systems or the "adm" group on Debian-derived systems). In the present incarnation of nsswitch, the only way to have such groups managed by a remote user store such as FreeIPA or Active Directory would be to manually remove the groups from /etc/group on the clients so that nsswitch would then move past nss_files and into the SSSD, nss-ldap or other remote user database. == Solution == With this patch, a new action is introduced for nsswitch: NSS_ACTION_MERGE. To take advantage of it, one will add [SUCCESS=merge] between two database entries in the nsswitch.conf file. When a group is located in the first of the two group entries, processing will continue on to the next one. If the group is also found in the next entry (and the group name and GID are an exact match), the member list of the second entry will be added to the group object to be returned. == Implementation == After each DL_LOOKUP_FN() returns, the next action is checked. If the function returned NSS_STATUS_SUCCESS and the next action is NSS_ACTION_MERGE, a copy of the result buffer is saved for the next pass through the loop. If on this next pass through the loop the database returns another instance of a group matching both the group name and GID, the member list is added to the previous list and it is returned as a single object. If the following database does not contain the same group, then the original is copied back into the destination buffer. This patch implements merge functionality only for the group database. For other databases, there is a default implementation that will return the EINVAL errno if a merge is requested. The merge functionality can be implemented for other databases at a later time if such is needed. Each database must provide a unique implementation of the deep-copy and merge functions. If [SUCCESS=merge] is present in nsswitch.conf for a glibc version that does not support it, glibc will process results up until that operation, at which time it will return results if it has found them or else will simply return an error. In practical terms, this ends up behaving like the remainder of the nsswitch.conf line does not exist. == Iterators == This feature does not modify the iterator functionality from its current behavior. If getgrnam() or getgrgid() is called, glibc will iterate through all entries in the `group` line in nsswitch.conf and display the list of members without attempting to merge them. This is consistent with the behavior of nss_files where if two separate lines are specified for the same group in /etc/groups, getgrnam()/getgrgid() will display both. Clients are already expected to handle this gracefully. == No Premature Optimizations == The following is a list of places that might be eligible for optimization, but were not overengineered for this initial contribution: * Any situation where a merge may occur will result in one malloc() of the same size as the input buffer. * Any situation where a merge does occur will result in a second malloc() to hold the list of pointers to member name strings. * The list of members is simply concatenated together and is not tested for uniqueness (which is identical to the behavior for nss_files, which will simply return identical values if they both exist on the line in the file. This could potentially be optimized to reduce space usage in the buffer, but it is both complex and computationally expensive to do so. == Testing == I performed testing by running the getent utility against my newly-built glibc and configuring /etc/nsswitch.conf with the following entry: group: group: files [SUCCESS=merge] sss In /etc/group I included the line: wheel❌10:sgallagh I then configured my local SSSD using the id_provider=local to respond with: wheel:*:10:localuser,localuser2 I then ran `getent group wheel` against the newly-built glibc in multiple situations and received the expected output as described above: * When SSSD was running. * When SSSD was configured in nsswitch.conf but the daemon was not running. * When SSSD was configured in nsswitch.conf but nss_sss.so.2 was not installed on the system. * When the order of 'sss' and 'files' was reversed. * All of the above with the [SUCCESS=merge] removed (to ensure no regressions). * All of the above with `getent group 10`. * All of the above with `getent group` with and without `enumerate=true` set in SSSD. * All of the above with and without nscd enabled on the system. |
|
|
Florian Weimer
|
f5b3338d70 | NEWS entry for CVE-2016-3075 | |
|
Florian Weimer
|
4ab2ab03d4 |
CVE-2016-3706: getaddrinfo: stack overflow in hostent conversion [BZ #20010]
When converting a struct hostent response to struct gaih_addrtuple, the gethosts macro (which is called from gaih_inet) used alloca, without malloc fallback for large responses. This commit changes this code to use calloc unconditionally. This commit also consolidated a second hostent-to-gaih_addrtuple conversion loop (in gaih_inet) to use the new conversion function. |
|
|
Florian Weimer
|
b49ab5f450 |
Remove union wait [BZ #19613]
The overloading approach in the W* macros was incompatible with integer expressions of a type different from int. Applications using union wait and these macros will have to migrate to the POSIX-specified int status type. |
|
|
Carlos O'Donell
|
de51ff8c05 | NEWS (2.23): Fix typo in bug 19048 text. | |
|
Joseph Myers
|
5b4ecd3f95 |
Require Linux 3.2 except on x86 / x86_64, 3.2 headers everywhere.
In <https://sourceware.org/ml/libc-alpha/2016-01/msg00885.html> I proposed a minimum Linux kernel version of 3.2 for glibc 2.24, since Linux 2.6.32 has reached EOL. In the discussion in February, some concerns were expressed about compatibility with OpenVZ containers. It's not clear that these are real issues, given OpenVZ backporting kernel features and faking the kernel version for guest software, as discussed in <https://sourceware.org/ml/libc-alpha/2016-02/msg00278.html>. It's also not clear that supporting running GNU/Linux distributions from late 2016 (at the earliest) on a kernel series from 2009 is a sensible expectation. However, as an interim step, this patch increases the requirement everywhere except x86 / x86_64 (since the controversy was only about those architectures); the special caveats and settings can easily be removed later when we're ready to increase the requirements on x86 / x86_64 (and if someone would like to raise the issue on LWN as suggested in the previous discussion, that would be welcome). 3.2 kernel headers are required everywhere by this patch. (x32 already requires 3.4 or later, so is unaffected by this patch.) As usual for such a change, this patch only changes the configure scripts and associated documentation. The intent is to follow up with removal of dead __LINUX_KERNEL_VERSION conditionals. Each __ASSUME_* or other macro that becomes dead can then be removed independently. Tested for x86_64 and x86. * sysdeps/unix/sysv/linux/configure.ac (LIBC_LINUX_VERSION): Define to 3.2.0. (arch_minimum_kernel): Likewise. * sysdeps/unix/sysv/linux/configure: Regenerated. * sysdeps/unix/sysv/linux/i386/configure.ac (arch_minimum_kernel): Define to 2.6.32. * sysdeps/unix/sysv/linux/i386/configure: Regenerated. * sysdeps/unix/sysv/linux/x86_64/64/configure.ac (arch_minimum_kernel): Define to 2.6.32. * sysdeps/unix/sysv/linux/x86_64/64/configure: Regenerated. * README: Document Linux 3.2 requirement. * manual/install.texi (Linux): Document Linux 3.2 headers requirement. * INSTALL: Regenerated. |
|
|
Florian Weimer
|
7584a3f96d | Deprecate readdir_r, readdir64_r [BZ #19056] | |
|
Mike Frysinger
|
b6ebba701c |
locales: pap_AN: delete old/deprecated locale [BZ #16003]
From the bug: Netherlands Antilles was dissolved, and "AN" is not a part of ISO 3166 anymore. According to setlocale(3), "territory is an ISO 3166 country code". We now have pap_AW and pap_CW. Reported-by: Chris Leonard <cjlhomeaddress@gmail.com> |
|
Adhemerval Zanella
|
11fca9615f | Update NEWS with 2.24 template | |
|
Adhemerval Zanella
|
ad372e296b | Update NEWS with fixed bugs for 2.23 release | |
|
Florian Weimer
|
6400ae6ecf | NEWS: List additional fixed security bugs | |
|
Carlos O'Donell
|
e9db92d3ac |
CVE-2015-7547: getaddrinfo() stack-based buffer overflow (Bug 18665).
* A stack-based buffer overflow was found in libresolv when invoked from libnss_dns, allowing specially crafted DNS responses to seize control of execution flow in the DNS client. The buffer overflow occurs in the functions send_dg (send datagram) and send_vc (send TCP) for the NSS module libnss_dns.so.2 when calling getaddrinfo with AF_UNSPEC family. The use of AF_UNSPEC triggers the low-level resolver code to send out two parallel queries for A and AAAA. A mismanagement of the buffers used for those queries could result in the response of a query writing beyond the alloca allocated buffer created by _nss_dns_gethostbyname4_r. Buffer management is simplified to remove the overflow. Thanks to the Google Security Team and Red Hat for reporting the security impact of this issue, and Robert Holiday of Ciena for reporting the related bug 18665. (CVE-2015-7547) See also: https://sourceware.org/ml/libc-alpha/2016-02/msg00416.html https://sourceware.org/ml/libc-alpha/2016-02/msg00418.html |
|
|
Joseph Myers
|
1979f3c1ad |
Update copyright dates not handled by scripts/update-copyrights.
I've updated copyright dates in glibc for 2016. This is the patch for the changes not generated by scripts/update-copyrights and subsequent build / regeneration of generated files. * NEWS: Update copyright dates. * catgets/gencat.c (print_version): Likewise. * csu/version.c (banner): Likewise. * debug/catchsegv.sh: Likewise. * debug/pcprofiledump.c (print_version): Likewise. * debug/xtrace.sh (do_version): Likewise. * elf/ldconfig.c (print_version): Likewise. * elf/ldd.bash.in: Likewise. * elf/pldd.c (print_version): Likewise. * elf/sotruss.sh: Likewise. * elf/sprof.c (print_version): Likewise. * iconv/iconv_prog.c (print_version): Likewise. * iconv/iconvconfig.c (print_version): Likewise. * locale/programs/locale.c (print_version): Likewise. * locale/programs/localedef.c (print_version): Likewise. * login/programs/pt_chown.c (print_version): Likewise. * malloc/memusage.sh (do_version): Likewise. * malloc/memusagestat.c (print_version): Likewise. * malloc/mtrace.pl: Likewise. * manual/libc.texinfo: Likewise. * nptl/version.c (banner): Likewise. * nscd/nscd.c (print_version): Likewise. * nss/getent.c (print_version): Likewise. * nss/makedb.c (print_version): Likewise. * posix/getconf.c (main): Likewise. * scripts/test-installation.pl: Likewise. * sysdeps/unix/sysv/linux/lddlibc4.c (main): Likewise. |
|
|
Joseph Myers
|
f7a9f785e5 | Update copyright dates with scripts/update-copyrights. | |
Dmitry V. Levin
|
3cf74f8a4a |
Fix getaddrinfo bug number in ChangeLog and NEWS files
This amends commit
|
|
|
Joseph Myers
|
eed3e1eb79 |
Make obsolete syscall wrappers into compat symbols (bug 18472).
Various Linux kernel syscalls have become obsolete over time. Specifically, the following are obsolete in all kernel versions supported by glibc, are not present for architectures more recently added to the kernel, and as such, the wrapper functions for them should be compat symbols, not in static libc and not available for new links with shared libc. * bdflush: in Linux 2.6, does nothing if present. * create_module get_kernel_syms query_module: Linux 2.4 module interface, syscalls not present in Linux 2.6. * uselib: part of the mechanism for loading a.out shared libraries, irrelevant with ELF. This patch adds support for syscalls.list to list syscall aliases of the form NAME@VERSION:OBSOLETED, with SHLIB_COMPAT conditionals being generated for such aliases. Those five syscalls are then made into compat symbols (obsoleted in glibc 2.23, so future ports won't have these symbols at all), with the header <sys/kdaemon.h> declaring bdflush being removed. When we move to 3.2 as minimum kernel version, the same can be done for nfsservctl (removed in Linux 3.1) as well. Tested for x86_64 and x86 (testsuite, as well as checking that the symbols in question indeed become compat symbols, that they are indeed omitted from static libc, and that the generated SHLIB_COMPAT conditionals look right). [BZ #18472] * sysdeps/unix/Makefile ($(objpfx)stub-syscalls.c): Handle entries for the form NAME@VERSION:OBSOLETED and generate SHLIB_COMPAT conditionals for them. * sysdeps/unix/make-syscalls.sh (emit_weak_aliases): Likewise. * sysdeps/unix/sysv/linux/sys/kdaemon.h: Remove file. * sysdeps/unix/sysv/linux/Makefile (sysdep_headers): Remove sys/kdaemon.h. * sysdeps/unix/sysv/linux/syscalls.list (bdflush): Make into compat-only syscall, obsoleted in glibc 2.23. (create_module): Likewise. (get_kernel_syms): Likewise. (query_module): Likewise. (uselib): Likewise. * manual/sysinfo.texi (System Parameters): Do not mention bdflush. |
|
|
Mike FABIAN
|
23256f5ed8 |
Update to Unicode 8.0.0.
Update __STDC_ISO_10646__ to 201505L for Unicode 8.0.0. Update character encoding, ctype, and transliteration tables. New scripts autogenerate transliteration tables. |
|
|
Joseph Myers
|
8f5e8b01a1 |
Fix nan functions handling of payload strings (bug 16961, bug 16962).
The nan, nanf and nanl functions handle payload strings by doing e.g.:
if (tagp[0] != '\0')
{
char buf[6 + strlen (tagp)];
sprintf (buf, "NAN(%s)", tagp);
return strtod (buf, NULL);
}
This is an unbounded stack allocation based on the length of the
argument. Furthermore, if the argument starts with an n-char-sequence
followed by ')', that n-char-sequence is wrongly treated as
significant for determining the payload of the resulting NaN, when ISO
C says the call should be equivalent to strtod ("NAN", NULL), without
being affected by that initial n-char-sequence. This patch fixes both
those problems by using the __strtod_nan etc. functions recently
factored out of strtod etc. for that purpose, with those functions
being exported from libc at version GLIBC_PRIVATE.
Tested for x86_64, x86, mips64 and powerpc.
[BZ #16961]
[BZ #16962]
* math/s_nan.c (__nan): Use __strtod_nan instead of constructing a
string on the stack for strtod.
* math/s_nanf.c (__nanf): Use __strtof_nan instead of constructing
a string on the stack for strtof.
* math/s_nanl.c (__nanl): Use __strtold_nan instead of
constructing a string on the stack for strtold.
* stdlib/Versions (libc): Add __strtof_nan, __strtod_nan and
__strtold_nan to GLIBC_PRIVATE.
* math/test-nan-overflow.c: New file.
* math/test-nan-payload.c: Likewise.
* math/Makefile (tests): Add test-nan-overflow and
test-nan-payload.
|
|
|
Florian Weimer
|
2359035ac5 |
Remove CPU set size checking from affinity functions [BZ #19143]
With current kernel versions, the check does not reliably detect that
unavailable CPUs are requested, for these reasons:
(1) The kernel will silently ignore non-allowed CPUs, that is, CPUs
which are physically present but disallowed for the thread
based on system configuration.
(2) Similarly, CPU bits which lack an online CPU (possible CPUs)
are ignored.
(3) The existing probing code assumes that the CPU mask size is a
power of two and at least 1024. Neither has it to be a power
of two, nor is the minimum possible value 1024, so the value
determined is often too large. This means that the CPU set
size check in glibc accepts CPU bits beyond the actual hard
system limit.
(4) Future kernel versions may not even have a fixed CPU set size.
After the removal of the probing code, the kernel still returns
EINVAL if no CPU in the requested set remains which can run the
thread after the affinity change.
Applications which care about the exact affinity mask will have
to query it using sched_getaffinity after setting it. Due to the
effects described above, this commit does not change this.
The new tests supersede tst-getcpu, which is removed. This
addresses bug 19164 because the new tests allocate CPU sets
dynamically.
* nptl/check-cpuset.h: Remove.
* nptl/pthread_attr_setaffinity.c (__pthread_attr_setaffinity_new):
Remove CPU set size check.
* nptl/pthread_setattr_default_np.c (pthread_setattr_default_np):
Likewise.
* sysdeps/unix/sysv/linux/check-cpuset.h: Remove.
* sysdeps/unix/sysv/linux/pthread_setaffinity.c
(__kernel_cpumask_size, __determine_cpumask_size): Remove.
(__pthread_setaffinity_new): Remove CPU set size check.
* sysdeps/unix/sysv/linux/sched_setaffinity.c
(__kernel_cpumask_size): Remove.
(__sched_setaffinity_new): Remove CPU set size check.
* manual/threads.texi (Default Thread Attributes): Remove stale
reference to check_cpuset_attr, determine_cpumask_size in comment.
* sysdeps/unix/sysv/linux/Makefile [$(subdir) == posix] (tests):
Remove tst-getcpu. Add tst-affinity, tst-affinity-pid.
[$(subdir) == nptl] (tests): Add tst-thread-affinity-pthread,
tst-thread-affinity-pthread2, tst-thread-affinity-sched.
* sysdeps/unix/sysv/linux/tst-affinity.c: New file.
* sysdeps/unix/sysv/linux/tst-affinity-pid.c: New file.
* sysdeps/unix/sysv/linux/tst-skeleton-affinity.c: New skeleton test file.
* sysdeps/unix/sysv/linux/tst-thread-affinity-sched.c: New file.
* sysdeps/unix/sysv/linux/tst-thread-affinity-pthread.c: New file.
* sysdeps/unix/sysv/linux/tst-thread-affinity-pthread2.c: New file.
* sysdeps/unix/sysv/linux/tst-thread-skeleton-affinity.c: New
skeleton test file.
* sysdeps/unix/sysv/linux/tst-getcpu.c: Remove. Superseded by
tst-affinity-pid.
|
|
|
Joseph Myers
|
d709042a6e |
Fix lgamma setting signgam for ISO C (bug 15421).
The lgamma (and likewise lgammaf, lgammal) function wrongly sets the signgam variable even when building for strict ISO C conformance (-std=c99 / -std=c11), although the user may define such a variable and it's only in the implementation namespace for POSIX with XSI extensions enabled. Following discussions starting at <https://sourceware.org/ml/libc-alpha/2013-04/msg00767.html> and <https://sourceware.org/ml/libc-alpha/2015-10/msg00844.html>, it seems that the safest approach for fixing this particular issue is for signgam to become a weak alias for a newly exported symbol __signgam, with the library functions only setting __signgam, at which point static linker magic will preserve the alias for newly linked binaries that refer to the library's signgam rather than defining their own, while breaking the alias for programs that define their own signgam, with new symbol versions for lgamma functions and with compat symbols for existing binaries that set both signgam and __signgam. This patch implements that approach for the fix. signgam is made into a weak alias. The four symbols __signgam, lgamma, lgammaf, lgammal get new symbol versions at version GLIBC_2.23, with the existing versions of lgamma, lgammaf and lgammal becoming compat symbols. When the compat versions are built, gamma, gammaf and gammal are aliases for the compat versions (i.e. always set signgam); this is OK as they are not ISO C functions, and avoids adding new symbol versions for them unnecessarily. When the compat versions are not built (i.e. for static linking and for future glibc ports), gamma, gammaf and gammal are aliases for the new versions that set __signgam. The ldbl-opt versions are updated accordingly. The lgamma wrappers are adjusted so that the same source files, included from different files with different definitions of USE_AS_COMPAT, can build either the new versions or the compat versions. Similar changes are made to the ia64 versions (untested). Tests are added that the lgamma functions do not interfere with a user variable called signgam for ISO C, with various choices for the size of that variable, whether it is initialized, and for static and dynamic linking. The conformtest whitelist entry is removed as well. Tested for x86_64, x86, mips64 and powerpc, including looking at objdump --dynamic-syms output to make sure the expected sets of symbols were aliases. Also spot-tested that a binary built with old glibc works properly (i.e. gets signgam set) when run with new glibc. [BZ #15421] * sysdeps/ieee754/s_signgam.c (signgam): Rename to __signgam, initialize with 0 and define as weak alias of __signgam. * include/math.h [!_ISOMAC] (__signgam): Declare. * math/Makefile (libm-calls): Add w_lgamma_compat. (tests): Add test-signgam-uchar, test-signgam-uchar-init, test-signgam-uint, test-signgam-uint-init, test-signgam-ullong and test-signgam-ullong-init. (tests-static): Add test-signgam-uchar-static, test-signgam-uchar-init-static, test-signgam-uint-static, test-signgam-uint-init-static, test-signgam-ullong-static and test-signgam-ullong-init-static. (CFLAGS-test-signgam-uchar.c): New variable. (CFLAGS-test-signgam-uchar-init.c): Likewise. (CFLAGS-test-signgam-uchar-static.c): Likewise. (CFLAGS-test-signgam-uchar-init-static.c): Likewise. (CFLAGS-test-signgam-uint.c): Likewise. (CFLAGS-test-signgam-uint-init.c): Likewise. (CFLAGS-test-signgam-uint-static.c): Likewise. (CFLAGS-test-signgam-uint-init-static.c): Likewise. (CFLAGS-test-signgam-ullong.c): Likewise. (CFLAGS-test-signgam-ullong-init.c): Likewise. (CFLAGS-test-signgam-ullong-static.c): Likewise. (CFLAGS-test-signgam-ullong-init-static.c): Likewise. * math/Versions (libm): Add GLIBC_2.23. * math/lgamma-compat.h: New file. * math/test-signgam-main.c: Likewise. * math/test-signgam-uchar-init-static.c: Likewise. * math/test-signgam-uchar-init.c: Likewise. * math/test-signgam-uchar-static.c: Likewise. * math/test-signgam-uchar.c: Likewise. * math/test-signgam-uint-init-static.c: Likewise. * math/test-signgam-uint-init.c: Likewise. * math/test-signgam-uint-static.c: Likewise. * math/test-signgam-uint.c: Likewise. * math/test-signgam-ullong-init-static.c: Likewise. * math/test-signgam-ullong-init.c: Likewise. * math/test-signgam-ullong-static.c: Likewise. * math/test-signgam-ullong.c: Likewise. * math/w_lgamma.c: Rename to w_lgamma_main.c and replace by wrapper of w_lgamma_main.c. * math/w_lgamma_compat.c: New file. * math/w_lgamma_compatf.c: Likewise. * math/w_lgamma_compatl.c: Likewise. * math/w_lgamma_main.c: New file. Based on w_lgamma.c. Include <lgamma-compat.h>. Condition contents on [BUILD_LGAMMA]. Support defining compatibility symbols. (__lgamma): Change to LGFUNC (__lgamma). Use CALL_LGAMMA. * math/w_lgammaf.c: Rename to w_lgammaf_main.c and replace by wrapper of w_lgammaf_main.c. * math/w_lgammaf_main.c: New file. Based on w_lgammaf.c. Include <lgamma-compat.h>. Condition contents on [BUILD_LGAMMA]. Support defining compatibility symbols. (__lgammaf): Change to LGFUNC (__lgammaf). Use CALL_LGAMMA. * math/w_lgammal.c: Rename to w_lgammal_main.c and replace by wrapper of w_lgammal_main.c. * math/w_lgammal_main.c: New file. Based on w_lgammal.c. Include <lgamma-compat.h>. Condition contents on [BUILD_LGAMMA]. Support defining compatibility symbols. (__lgammal): Change to LGFUNC (__lgammal). Use CALL_LGAMMA. * sysdeps/ia64/fpu/lgamma-compat.h: New file. * sysdeps/ia64/fpu/w_lgamma.c: Move to .... * sysdeps/ia64/fpu/w_lgamma_main.c: ...here. Include <lgamma-compat.h>. (__ieee754_lgamma): Change to LGFUNC (lgamma). Use CALL_LGAMMA. (__ieee754_gamma): Define as alias. * sysdeps/ia64/fpu/w_lgammaf.c: Move to .... * sysdeps/ia64/fpu/w_lgammaf_main.c: ...here. Include <lgamma-compat.h>. (__ieee754_lgammaf): Change to LGFUNC (lgammaf). Use CALL_LGAMMA. (__ieee754_gammaf): Define as alias. * sysdeps/ia64/fpu/w_lgammal.c: Move to .... * sysdeps/ia64/fpu/w_lgammal_main.c: ...here. Include <lgamma-compat.h>. (__ieee754_lgammal): Change to LGFUNC (lgammal). Use CALL_LGAMMA. (__ieee754_gammal): Define as alias. * sysdeps/ieee754/ldbl-opt/w_lgamma.c: Move to .... * sysdeps/ieee754/ldbl-opt/w_lgamma_compat.c: ...here. Include <math/w_lgamma_compat.c>. [LONG_DOUBLE_COMPAT(libm, GLIBC_2_0)] (__lgammal_dbl_compat): Define as alias of __lgamma_compat and use in defining lgammal. * sysdeps/ieee754/ldbl-opt/w_lgammal.c: Move to .... * sysdeps/ieee754/ldbl-opt/w_lgamma_compatl.c: ...here. Include <math/lgamma-compat.h> and <math/w_lgamma_compatl.c>. (USE_AS_COMPAT): New macro. (LGAMMA_OLD_VER): Undefine and redefine. (lgammal): Do not define here. (gammal): Only define here if [GAMMA_ALIAS]. * conform/linknamespace.pl (@whitelist): Remove signgam. * sysdeps/nacl/libm.abilist: Update. * sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise. |
|
|
Florian Weimer
|
2eecc8afd0 |
Terminate process on invalid netlink response from kernel [BZ #12926]
The recvmsg system calls for netlink sockets have been particularly prone to picking up unrelated data after a file descriptor race (where the descriptor is closed and reopened concurrently in a multi-threaded process, as the result of a file descriptor management issue elsewhere). This commit adds additional error checking and aborts the process if a datagram of unexpected length (without the netlink header) is received, or an error code which cannot happen due to the way the netlink socket is used. [BZ #12926] Terminate process on invalid netlink response. * sysdeps/unix/sysv/linux/netlinkaccess.h (__netlink_assert_response): Declare. * sysdeps/unix/sysv/linux/netlink_assert_response.c: New file. * sysdeps/unix/sysv/linux/Makefile [$(subdir) == inet] (sysdep_routines): Add netlink_assert_response. * sysdeps/unix/sysv/linux/check_native.c (__check_native): Call __netlink_assert_response. * sysdeps/unix/sysv/linux/check_pf.c (make_request): Likewise. * sysdeps/unix/sysv/linux/ifaddrs.c (__netlink_request): Likewise. * sysdeps/unix/sysv/linux/Versions (GLIBC_PRIVATE): Add __netlink_assert_response. |
|
Mark Wielaard
|
8b7b7f75d9 |
Add LFS support for fts functions (bug 11460)
fts didn't have large-file support yet and fts.h had an #error preventing usage when _FILE_OFFSET_BITS was set. This required nasty workarounds for programs using fts with LFS. This patch implements LFS support for fts by adding FTS64 and FTENT64 variants plus fts64 functions. Which are simple aliases for 64bit off_t arches. Also includes a simple testcase for some of the fts functions with or without LFS enabled. [BZ #11460] * io/Makefile (routines): Add fts64. (tests): Add tst-fts and tst-fts-lfs. (CFLAGS-fts64.c): New. * io/Versions (GLIBC_2.23): New. * io/fts.c: Replace FTS with FTSOBJ, FTSENT with FTSENTRY. Use function defines FTS_OPEN, FTS_CLOSE, FTS_READ, FTS_SET and FTS_CHILDREN. Define FTSOBJ, FTSENTRY, FTS_OPEN, FTS_CLOSE, FTS_READ, FTS_SET, FTS_CHILDREN, INO_T, STAT and LSTAT if necessary. * io/fts.h (FTS64): New if _USE_LARGEFILE64. (FTSENT64): Likewise. (fts64_children): Likewise. (fts64_close): Likewise. (fts64_open): Likewise. (fts64_read): Likewise. (fts64_set): Likewise. * io/fts64.c: New file. * io/tst-fts.c: New test. * io/tst-fts-lfs.c: Likewise. * sysdeps/unix/sysv/linux/aarch64/libc.abilist (GLIBC_2.23): Add GLIBC_2.23, fts64_children, fts64_close, fts64_open, fts64_read and fts64_set. * sysdeps/unix/sysv/linux/alpha/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/arm/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/hppa/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/i386/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/ia64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/coldfire/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/m680x0/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/microblaze/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/fpu/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/nofpu/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/n32/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/n64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/nios2/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libc-le.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/sh/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilepro/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libc.abilist: Likewise. * sysdeps/wordsize-64/fts.c: New file. * sysdeps/wordsize-64/fts64.c: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/n64/fts.c: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/n64/fts64.c: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/fts.c: likewise. * sysdeps/unix/sysv/linux/x86_64/x32/fts64.c: likewise. |
|
|
Joseph Myers
|
f268ab5f69 |
Add script to list fixed bugs for the NEWS file.
This patch adds a script to list fixed bugs for the NEWS file, as proposed in <https://sourceware.org/ml/libc-alpha/2015-10/msg01043.html>, with the bugs listed in the format proposed in <https://sourceware.org/ml/libc-alpha/2015-11/msg00088.html>. * scripts/list-fixed-bugs.py: New file. |
|
|
Joseph Myers
|
01189b083b |
Fix i386/x86_64 log* (1) zero sign for -ffinite-math-only (bug 19213).
For the -ffinite-math-only versions of various x86_64 and x86 log* functions, a zero result from log* (1) is returned with incorrect sign in round-downward mode. This patch fixes this in a similar way to the previous fixes for the non-*_finite versions of the functions. Tested for x86_64 and x86 (including an i586 build), together with a patch that will be applied separately to enable the main libm-test.inc tests for the finite-math-only functions. [BZ #19213] * sysdeps/i386/fpu/e_log.S (__log_finite): Ensure +0 is always returned for argument 1. * sysdeps/i386/fpu/e_logf.S (__logf_finite): Likewise. * sysdeps/i386/fpu/e_logl.S (__logl_finite): Likewise. * sysdeps/i386/i686/fpu/e_logl.S (__logl_finite): Likewise. * sysdeps/x86_64/fpu/e_log10l.S (__log10l_finite): Likewise. * sysdeps/x86_64/fpu/e_log2l.S (__log2l_finite): Likewise. * sysdeps/x86_64/fpu/e_logl.S (__logl_finite): Likewise. |
|
|
Joseph Myers
|
939fdd1c36 |
Fix finite-math-only lgamma functions signgam setting (bug 19211).
The lgamma inline functions in bits/math-finite.h do not set signgam if __USE_ISOC99, even when other feature test macros mean a standard such as XSI POSIX is selected for which it should be set. (This is essentially the opposite issue to bug 15421, the out-of-line versions setting signgam even when they shouldn't.) This patch fixes those functions to use __USE_MISC || __USE_XOPEN as the condition for when to set signgam, since it's the condition for when math.h declares signgam. The legacy gamma* names are only declared at all if __USE_MISC || __USE_XOPEN, so they just set signgam unconditionally. Tests for certain standards or not using _GNU_SOURCE cannot use test-skeleton.c (this is a known issue noted on the wiki todo list). Thus, the new tests that signgam remains not set in ISO C modes do not use test-skeleton.c. They also define _ISOMAC to avoid running into declarations in the internal include/ headers that only work in _GNU_SOURCE mode. Tested for x86_64 and x86. [BZ #19211] * math/bits/math-finite.h (lgamma): Set signgam if [__USE_MISC || __USE_XOPEN], not if [!__USE_ISOC99]. (lgammaf): Likewise. (lgammal): Likewise. (gamma): Set signgam unconditionally, not if [!__USE_ISOC99]. (gammaf): Likewise. (gammal): Likewise. * math/test-signgam-finite-c11.c: New file. * math/test-signgam-finite-c99.c: Likewise. * math/test-signgam-finite.c: Likewise. * math/Makefile (tests): Add test-signgam-finite, test-signgam-finite-c99 and test-signgam-finite-c11. (CFLAGS-test-signgam-finite.c): New variable. (CFLAGS-test-signgam-finite-c99.c): Likewise. (CFLAGS-test-signgam-finite-c11.c): Likewise. |
|
|
Joseph Myers
|
f248238cf4 |
Fix features.h for -Wundef (bug 19212).
features.h is not clean with -Wundef (for the installed header, of course this only appears with -Wsystem-headers). In ISO C standards modes, you get a series of warnings / errors relating to _POSIX_C_SOURCE and _XOPEN_SOURCE not being defined when tested in standards mode and uses #undef _GNU_SOURCE to avoid the default _GNU_SOURCE from libc-symbols.h. This patch changes the relevant #if conditionals to avoid these warnings / errors. Tested for x86_64 and x86 (testsuite, and that installed shared libraries are unchanged by the patch). [BZ #19212] * include/features.h [(_XOPEN_SOURCE - 0) >= 500]: Change conditional to [defined _XOPEN_SOURCE && (_XOPEN_SOURCE - 0) >= 500]. [_POSIX_C_SOURCE >= 1]: Change conditional to [defined _POSIX_C_SOURCE && _POSIX_C_SOURCE >= 1]. [(_POSIX_C_SOURCE - 0) >= 199309L]: Change conditional to [defined _POSIX_C_SOURCE && (_POSIX_C_SOURCE - 0) >= 199309L]. [(_POSIX_C_SOURCE - 0) >= 199506L]: Change conditional to [defined _POSIX_C_SOURCE && (_POSIX_C_SOURCE - 0) >= 199506L]. [(_POSIX_C_SOURCE - 0) >= 200112L]: Change conditional to [defined _POSIX_C_SOURCE && (_POSIX_C_SOURCE - 0) >= 200112L]. [(_POSIX_C_SOURCE - 0) >= 200809L]: Change conditional to [defined _POSIX_C_SOURCE && (_POSIX_C_SOURCE - 0) >= 200809L]. |
|
|
Joseph Myers
|
8fed86556b |
Don't redirect ldexp to scalbn in bits/math-finite.h (bug 19209).
bits/math-finite.h maps ldexp functions to corresponding scalbn functions. This is (a) a namespace bug for C90, which has ldexp but not scalbn, and (b) in any case useless, since the ldexp and scalbn functions have identical semantics (for floating-point types with radix 2), and since the fix for bug 6803 are actually aliases (presumably the mapping was based around the old bug of scalbn not setting errno). This patch removes the bogus redirections. Tested for x86_64 and x86. [BZ #19209] * math/bits/math-finite.h (ldexp): Remove declaration. (ldexpf): Likewise. (ldexpl): Likewise. |
|
|
Joseph Myers
|
3bfee8beb8 |
Make bits/math-finite.h conditions match other headers (bug 19205).
bits/math-finite.h declares -ffinite-math-only variants of various functions under conditions not matching those under which the normal versions are declared. * math.h only ever includes bits/mathcalls.h to declare float and long double functions if __USE_ISOC99, but bits/math-finite.h declares some float functions regardless (long double ones are conditioned on __MATH_DECLARE_LDOUBLE). (For C90 functions this isn't a conformance bug because C90 reserves the float and long double names, but is still contrary to good glibc practice. For some other functions in older XSI standards it *is* a conformance bug.) * Some functions are defined as inlines using lgamma_r functions under conditions where those lgamma_r functions are not themselves declared. * hypot is declared under __USE_XOPEN || __USE_ISOC99 in bits/mathcalls.h, __USE_ISOC99 only in bits/math-finite.h. * float and long double versions of Bessel functions should be limited to __USE_MISC (as in bug 18977). * gamma should not be declared for __USE_XOPEN2K (as in bug 18967). * remainder should be restricted to __USE_XOPEN_EXTENDED || __USE_ISOC99, not unconditional. * scalb should not be declared for __USE_XOPEN2K8, and scalbf and scalbl are non-POSIX (as in bug 18967). This patch fixes all these issues (it doesn't seem worth splitting them into separate patches or bugs). I put __USE_ISOC99 conditionals, where needed, around both float and long double declarations, even though formally redundant around the long double declarations because __MATH_DECLARE_LDOUBLE isn't defined without __USE_ISOC99; it seemed clearer that way. The missing declarations of lgamma_r functions are dealt with by directly using declarations of __lgamma*_r_finite, in the implementation namespace, rather than having the inlines rely on asm redirection of lgamma*_r. After this patch, there are some apparently redundant nested __USE_ISOC99 conditionals in lgamma / gamma definitions. These actually reflect a separate bug (the correct condition for the lgamma inline functions to set signgam is __USE_MISC || __USE_XOPEN, the condition under which signgam is declared, rather than disabling setting it if __USE_ISOC99, which includes XSI POSIX versions for which signgam *should* be set). They'll be fixed as part of a fix for that bug, which will also add tests for these inlines. I've put a note about more general conform/ test coverage for -ffinite-math-only on <https://sourceware.org/glibc/wiki/Development_Todo/Master#conformtest_improvements>, alongside other options for which this is also relevant (some of which have also had such bugs in the past relating to mismatched conditionals). I also intend to enable the main libm-test.inc tests for the math-finite.h functions, but some other bugs in __*_finite need fixing first. [BZ #19205] * math/bits/math-finite.h (acosf): Condition declaration on [__USE_ISOC99]. (acosl): Likewise. (acoshf): Likewise. (acoshl): Likewise. (asinf): Likewise. (asinl): Likewise. (atan2f): Likewise. (atan2l): Likewise. (atanhf): Likewise. (atanhl): Likewise. (coshf): Likewise. (coshl): Likewise. (expf): Likewise. (expl): Likewise. (fmodf): Likewise. (fmodl): Likewise. (hypot): Change condition to [__USE_XOPEN || __USE_ISOC99]. (j0f): Change condition to [__USE_MISC && __USE_ISOC99]. (j0l): Likewise. (y0f): Likewise. (y0l): Likewise. (j1f): Likewise. (j1l): Likewise. (y1f): Likewise. (y1l): Likewise. (jnf): Likewise. (jnl): Likewise. (ynf): Likewise. (ynl): Likewise. (lgammaf_r): Condition declaration on [__USE_ISOC99]. (lgammal_r): Likewise. (__lgamma_r_finite): New declaration. (__lgammaf_r_finite): Likewise. (__lgammal_r_finite): Likewise. (lgamma): Use __lgamma_r_finite. (lgammaf): Condition definition on [__USE_ISOC99]. Use __lgammaf_r_finite. (lgammal): Condition definition on [__USE_ISOC99]. Use __lgammal_r_finite. (gamma): Do not define for [!__USE_MISC && __USE_XOPEN2K]. Use __lgamma_r_finite. (gammaf): Condition definition on [__USE_ISOC99]. Use __lgammaf_r_finite. (gammal): Condition definition on [__USE_ISOC99]. Use __lgammal_r_finite. (logf): Condition declaration on [__USE_ISOC99]. (logl): Likewise. (log10f): Likewise. (log10l): Likewise. (ldexpf): Likewise. (ldexpl): Likewise. (powf): Likewise. (powl): Likewise. (remainder): Condition declaration on [__USE_XOPEN_EXTENDED || __USE_ISOC99]. (remainderf): Condition declaration on [__USE_ISOC99]. (remainderl): Likewise. (scalb): Do not declare for [!__USE_MISC && __USE_XOPEN2K8]. (scalbf): Change condition to [__USE_MISC && __USE_ISOC99]. (scalbl): Likewise. (sinhf): Condition declaration on [__USE_ISOC99]. (sinhl): Likewise. (sqrtf): Likewise. (sqrtl): Likewise. |
|
|
Florian Weimer
|
6fdd5d65c5 | Add bug 18604 to the correct section | |
|
Florian Weimer
|
739d805a57 | Add bug 18604 to NEWS | |
|
Joseph Myers
|
444ec6b8d8 |
Fix dbl-64 remainder sign of zero result (bug 19201).
For some large arguments, the dbl-64 implementation of remainder gives zero results with the wrong sign, resulting from a subtraction that is mathematically correct but does not guarantee that a zero result has the sign of the first argument to remainder. This patch adds an appropriate check for this case, similar to other implementations of remainder in the case of equality, and adds tests of remainder on inputs already used to test remquo. Tested for x86_64 and x86. [BZ #19201] * sysdeps/ieee754/dbl-64/e_remainder.c (__ieee754_remainder): Check for zero remainder in case of large exponents and ensure correct sign of result in that case. * math/libm-test.inc (remainder_test_data): Add more tests. |
|
|
Joseph Myers
|
85422c2acb |
Make nextafter, nexttoward set errno (bug 6799).
nextafter and nexttoward fail to set errno on overflow and underflow. This patch makes them do so in cases that should include all the cases where such errno setting is required by glibc's goals for when to set errno (but not all cases of underflow where the result is nonzero and so glibc's goals do not require errno setting). Tested for x86_64, x86, mips64 and powerpc. [BZ #6799] * math/s_nextafter.c: Include <errno.h>. (__nextafter): Set errno on overflow and underflow. * math/s_nexttowardf.c: Include <errno.h>. (__nexttowardf): Set errno on overflow and underflow. * sysdeps/i386/fpu/s_nextafterl.c: Include <errno.h>. (__nextafterl): Set errno on overflow and underflow. * sysdeps/i386/fpu/s_nexttoward.c: Include <errno.h>. (__nexttoward): Set errno on overflow and underflow. * sysdeps/i386/fpu/s_nexttowardf.c: Include <errno.h>. (__nexttowardf): Set errno on overflow and underflow. * sysdeps/ieee754/flt-32/s_nextafterf.c: Include <errno.h>. (__nextafterf): Set errno on overflow and underflow. * sysdeps/ieee754/ldbl-128/s_nextafterl.c: Include <errno.h>. (__nextafterl): Set errno on overflow and underflow. * sysdeps/ieee754/ldbl-128/s_nexttoward.c: Include <errno.h>. (__nexttoward): Set errno on overflow and underflow. * sysdeps/ieee754/ldbl-128/s_nexttowardf.c: Include <errno.h>. (__nexttowardf): Set errno on overflow and underflow. * sysdeps/ieee754/ldbl-128ibm/s_nextafterl.c: Include <errno.h>. (__nextafterl): Set errno on overflow and underflow. * sysdeps/ieee754/ldbl-128ibm/s_nexttoward.c: Include <errno.h>. (__nexttoward): Set errno on overflow and underflow. * sysdeps/ieee754/ldbl-128ibm/s_nexttowardf.c: Include <errno.h>. (__nexttowardf): Set errno on overflow and underflow. * sysdeps/ieee754/ldbl-96/s_nexttoward.c: Include <errno.h>. (__nexttoward): Set errno on overflow and underflow. * sysdeps/ieee754/ldbl-96/s_nexttowardf.c: Include <errno.h>. (__nexttowardf): Set errno on overflow and underflow. * sysdeps/ieee754/ldbl-opt/s_nexttowardfd.c: Include <errno.h>. (__nldbl_nexttowardf): Set errno on overflow and underflow. * sysdeps/m68k/m680x0/fpu/s_nextafterl.c: Include <errno.h>. (__nextafterl): Set errno on overflow and underflow. * math/libm-test.inc (nextafter_test_data): Do not allow errno setting to be missing on overflow. Add more tests. (nexttoward_test_data): Likewise. |
|
|
Joseph Myers
|
af1b2fd083 |
Fix ldbl-128 log1pl (-qNaN) spurious "invalid" exception (bug 19189).
The ldbl-128 version of log1pl raises a spurious "invalid" exception for a -qNaN argument. This patch fixes this by making the initial check for infinities and NaNs handle arguments of both signs in such a way that NaNs result in a NaN being returned (quietly if the input NaN was quiet) while +Inf results in +Inf being returned and -Inf results in a qNaN being returned with "invalid" exception raised. Tested for mips64. [BZ #19189] * sysdeps/ieee754/ldbl-128/s_log1pl.c (__log1pl): Make check for non-finite argument handle arguments with negative sign. |
|
|
Joseph Myers
|
5ce8f12506 |
Make drem an alias of remainder (bug 16171).
The libm drem functions just call the corresponding __remainder functions. This patch removes the unnecessary wrappers by making them into weak aliases at the ELF level. Tested for x86_64, x86, mips64 and powerpc. [BZ #16171] * math/w_remainder.c (drem): Define as weak alias of __remainder. [NO_LONG_DOUBLE] (dreml): Define as weak alias of __remainder. * math/w_remainderf.c (dremf): Define as weak alias of __remainderf. * math/w_remainderl.c (dreml): Define as weak alias of __remainderl. * sysdeps/ia64/fpu/e_remainder.S (drem): Define as weak alias of __remainder. * sysdeps/ia64/fpu/e_remainderf.S (dremf): Define as weak alias of __remainderf. * sysdeps/ia64/fpu/e_remainderl.S (dreml): Define as weak alias of __remainderl. * sysdeps/ieee754/ldbl-opt/nldbl-remainder.c (dreml): Define as weak alias of remainderl. * sysdeps/ieee754/ldbl-opt/w_remainder.c [LONG_DOUBLE_COMPAT(libm, GLIBC_2_0)] (__drem): Define as strong alias of __remainder. [LONG_DOUBLE_COMPAT(libm, GLIBC_2_0)] (dreml): Use compat_symbol. * sysdeps/ieee754/ldbl-opt/w_remainderl.c (__dreml): Define as strong alias of __remainderl. (dreml): Use long_double_symbol. * math/Makefile (libm-calls): Remove w_drem. * sysdeps/ieee754/ldbl-opt/Makefile (libnldbl-calls): Remove drem. (CFLAGS-nldbl-drem.c): Remove variable. (CFLAGS-nldbl-remainder.c): Add -fno-builtin-dreml. * math/w_drem.c: Remove file. * math/w_dremf.c: Likewise. * math/w_dreml.c: Likewise. * sysdeps/ieee754/ldbl-opt/nldbl-drem.c: Likewise. * sysdeps/ieee754/ldbl-opt/w_drem.c: Likewise. * sysdeps/ieee754/ldbl-opt/w_dreml.c: Likewise. |
|
|
Joseph Myers
|
2145f97cee |
Handle more state in i386/x86_64 fesetenv (bug 16068).
fenv_t should include architecture-specific floating-point modes and status flags. i386 and x86_64 fesetenv limit which bits they use from the x87 status and control words, when using saved state, and limit which parts of the state they set to fixed values, when using FE_DFL_ENV / FE_NOMASK_ENV. The following should be included but are excluded in at least some cases: status and masking for the "denormal operand" exception (which isn't part of FE_ALL_EXCEPT); precision control (explicitly mentioned in Annex F as something that counts as part of the floating-point environment); MXCSR FZ and DAZ bits (for FE_DFL_ENV and FE_NOMASK_ENV). This patch arranges for this extra state to be handled by fesetenv (and thereby by feupdateenv, which calls fesetenv). (Note that glibc functions using floating point are not generally expected to work correctly with non-default values of this state, especially precision control, but it is still logically part of the floating-point environment and should be handled as such by fesetenv. Changes to the state relating to subnormals ought generally to work with libm functions when the arguments aren't subnormal and neither are the expected results; that's a consequence of functions avoiding spurious internal underflows.) A question arising from this is whether FE_NOMASK_ENV should or should not mask the "denormal operand" exception. I decided it should mask that exception. This is the status quo - previously that exception could only be unmasked by direct manipulation of control registers (possibly via <fpu_control.h>). In addition, it means that use of FE_NOMASK_ENV leaves a floating-point environment the same as could be obtained by fesetenv (FE_DFL_ENV); feenableexcept (FE_ALL_EXCEPT);, rather than an environment in which an exception is unmasked that could only be masked again by using fesetenv with FE_DFL_ENV (or a previously saved environment) - this exception not being usable with other <fenv.h> functions because it's outside FE_ALL_EXCEPT. Tested for x86_64 and x86. [BZ #16068] * sysdeps/i386/fpu/fesetenv.c: Include <fpu_control.h>. (FE_ALL_EXCEPT_X86): New macro. (__fesetenv): Use FE_ALL_EXCEPT_X86 in most places instead of FE_ALL_EXCEPT. Ensure precision control is included in floating-point state. Ensure that FE_DFL_ENV and FE_NOMASK_ENV handle "denormal operand exception" and clear FZ and DAZ bits. * sysdeps/x86_64/fpu/fesetenv.c: Include <fpu_control.h>. (FE_ALL_EXCEPT_X86): New macro. (__fesetenv): Use FE_ALL_EXCEPT_X86 in most places instead of FE_ALL_EXCEPT. Ensure precision control is included in floating-point state. Ensure that FE_DFL_ENV and FE_NOMASK_ENV handle "denormal operand exception" and clear FZ and DAZ bits. * sysdeps/x86/fpu/test-fenv-sse-2.c: New file. * sysdeps/x86/fpu/test-fenv-x87.c: Likewise. * sysdeps/x86/fpu/Makefile [$(subdir) = math] (tests): Add test-fenv-x87 and test-fenv-sse-2. [$(subdir) = math] (CFLAGS-test-fenv-sse-2.c): New variable. |
|
|
Florian Weimer
|
a62719ba90 |
malloc: Prevent arena free_list from turning cyclic [BZ #19048]
[BZ# 19048] * malloc/malloc.c (struct malloc_state): Update comment. Add attached_threads member. (main_arena): Initialize attached_threads. * malloc/arena.c (list_lock): Update comment. (ptmalloc_lock_all, ptmalloc_unlock_all): Likewise. (ptmalloc_unlock_all2): Reinitialize arena reference counts. (deattach_arena): New function. (_int_new_arena): Initialize arena reference count and deattach replaced arena. (get_free_list, reused_arena): Update reference count and deattach replaced arena. (arena_thread_freeres): Update arena reference count and only put unreferenced arenas on the free list. |
|
|
Joseph Myers
|
0b9af583a5 |
Fix i386/x86_64 fesetenv SSE exception clearing (bug 19181).
The i386 and x86_64 versions of fesetenv, when called with FE_DFL_ENV or FE_NOMASK_ENV as argument, do not clear SSE exceptions raised in MXCSR. These arguments should, like other fenv_t values, represent the whole of the floating-point state, so such exceptions should be cleared; this patch adds the required clearing. (Discovered while working on bug 16068.) Tested for x86_64 and x86. [BZ #19181] * sysdeps/i386/fpu/fesetenv.c (__fesetenv): Clear already-raised SSE exceptions when argument is FE_DFL_ENV or FE_NOMASK_ENV. * sysdeps/x86_64/fpu/fesetenv.c (__fesetenv): Likewise. * math/test-fenv-clear-main.c: New file. * math/test-fenv-clear.c: Likewise. * math/Makefile (tests): Add test-fenv-clear. * sysdeps/x86/fpu/test-fenv-clear-sse.c: New file. * sysdeps/x86/fpu/Makefile [$(subdir) = math] (tests): Add test-fenv-clear-sse. [$(subdir) = math] (CFLAGS-test-fenv-clear-sse.c): New variable. |
|
|
Joseph Myers
|
8f82f28bba |
Remove MIPS16 atomics using __sync_* (bug 17404).
MIPS16 atomics used __sync_* with GCC before 4.7, which as noted in bug 17404 is missing the required barrier semantics for atomic_exchange_rel. This patch removes the code in question as dead now GCC before 4.7 is no longer supported for building glibc. Sanity tested with builds for MIPS. [BZ #17404] * sysdeps/mips/atomic-machine.h [__GNUC_PREREQ (4, 8) || (__mips16 && __GNUC_PREREQ (4, 7))]: Change conditional to [__GNUC_PREREQ (4, 8) || __mips16]. [__mips16 && !__GNUC_PREREQ (4, 7)]: Remove conditional code. |
|
Paul Murphy
|
72f1463df8 |
powerpc: Fix usage of elision transient failure adapt param
The skip_lock_out_of_tbegin_retries adaptive parameter was not being used correctly, nor as described. This prevents a fallback for all users of the lock if a transient abort occurs within the accepted number of retries. [BZ #19174] * sysdeps/powerpc/nptl/elide.h (__elide_lock): Fix usage of .skip_lock_out_of_tbegin_retries. * sysdeps/unix/sysv/linux/powerpc/elision-lock.c (__lll_lock_elision): Likewise, and respect a value of try_tbegin <= 0. |
|
|
Joseph Myers
|
b08b421835 |
Require GCC 4.7 or later to build glibc.
This patch implements a requirement of GCC 4.7 or later to build glibc. This was discussed in the thread starting at <https://sourceware.org/ml/libc-alpha/2015-08/msg00851.html>. Concerns were expressed by Mike and David. At <https://sourceware.org/ml/libc-alpha/2015-10/msg00453.html> I have provided a 14-patch series showing in outline the cleanups facilitated by this version requirement, as requested by Mike (this patch is the first in that series, with the addition of a NEWS entry). Given the absence of further concerns or alternative proposals for criteria for updates to this version requirement as requested in <https://sourceware.org/ml/libc-alpha/2015-10/msg00065.html>, I am interpreting this as "absence of sustained opposition" under Carlos's definition at <https://sourceware.org/glibc/wiki/Consensus> and proposing this patch for inclusion in glibc. I'd like to remind people testing with 4.6 that if they move to testing with GCC 5 then it will probably be about four years before they need to update the compiler they use to test glibc again. Although on the principles of time-based updates I think a move to requiring binutils 2.23 would be reasonable, I'm not currently aware of any cleanups that would facilitate so am not proposing that at this time (but would expect to propose a move to requiring binutils 2.24 in a year's time, as that brings features such as AVX512 support that should allow some conditionals to be cleaned up). If someone thinks a move to requiring 2.23 would help clean things up for their architecture, please speak up. (And in general, I suspect there are lots of architecture-specific configure tests that could be removed on the basis of current GCC and binutils version requirements, given how I've found architecture-independent tests obsolete on the basis of version requirements going back 20 years.) Tested for x86_64 and x86 (testsuite, and that installed shared libraries are unchanged by the patch). * configure.ac (libc_cv_compiler_ok): Require GCC 4.7 or later. * configure: Regenerated. * manual/install.texi (Tools for Compilation): Document requirement for GCC 4.7 or later. * INSTALL: Regenerated. |
|
|
Joseph Myers
|
c643db8792 |
Fix j1, jn missing errno setting on underflow (bug 18611).
j1 and jn can underflow for small arguments, but fail to set errno when underflowing to 0. This patch fixes them to set errno in that case. Tested for x86_64, x86, mips64 and powerpc. [BZ #18611] * sysdeps/ieee754/dbl-64/e_j1.c (__ieee754_j1): Set errno and avoid excess range and precision on underflow. * sysdeps/ieee754/dbl-64/e_jn.c (__ieee754_jn): Likewise. * sysdeps/ieee754/flt-32/e_j1f.c (__ieee754_j1f): Likewise. * sysdeps/ieee754/flt-32/e_jnf.c (__ieee754_jnf): Likewise. * sysdeps/ieee754/ldbl-128/e_j1l.c (__ieee754_j1l): Set errno on underflow. * sysdeps/ieee754/ldbl-128/e_jnl.c (__ieee754_jnl): Likewise. * sysdeps/ieee754/ldbl-128ibm/e_jnl.c (__ieee754_jnl): Likewise. * sysdeps/ieee754/ldbl-96/e_j1l.c (__ieee754_j1l): Likewise. * sysdeps/ieee754/ldbl-96/e_jnl.c (__ieee754_jnl): Likewise. * math/auto-libm-test-in: Do not allow missing errno setting for tests of j1 and jn. * math/auto-libm-test-out: Regenerated. |
|
|
Joseph Myers
|
846d9a4a3a |
Fix i386 / x86_64 nearbyint exception clearing (bug 15491).
The implementations of nearbyint functions using x87 floating point (i386 all versions, x86_64 long double only) use the fclex instruction, which clears any exceptions that were raised before the function was called. These functions must not clear exceptions that were raised before they were called. This patch fixes these functions to save and restore the whole floating-point environment (fnstenv / fldenv) as the way of avoiding raising "inexact" (recall that there isn't an x87 instruction for loading just the status word, so the whole environment has to be saved and loaded instead - the code already saved and loaded the control word, which is now obtained from the saved environment after this patch, to disable traps on "inexact"). In the case of the long double functions, any "invalid" exception from frndint (applied to a signaling NaN) needs merging into the saved state; this issue doesn't apply to the float and double functions because that exception would have been raised when the argument is loaded, before the environment is saved. [BZ #15491] * sysdeps/i386/fpu/s_nearbyint.S (__nearbyint): Save and restore floating-point environment instead of clearing all exceptions. * sysdeps/i386/fpu/s_nearbyintf.S (__nearbyintf): Likewise. * sysdeps/i386/fpu/s_nearbyintl.S (__nearbyintl): Likewise, merging in "invalid" exceptions from frndint. * sysdeps/x86_64/fpu/s_nearbyintl.S (__nearbyintl): Likewise. * math/test-nearbyint-except.c: New file. * math/Makefile (tests): Add test-nearbyint-except. |
|
Chris Metcalf
|
45ccb8346b |
Update NEWS to mention drive-by fix for bug 18699.
Wilco fixed this tilegx bug in commit
|
|
|
Joseph Myers
|
0a90a8f2b9 |
Fix ldbl-128 j0l spurious underflows (bug 19156).
My recent addition of more tests for j0 showed up that the ldbl-128 implementation of j0l produces spurious underflow exceptions for arguments close to 0 (when the result is very close to 1). This patch fixes this by just returning the argument in that case. Tested for mips64 (where it fixes the recently-added tests that were previously failing). [BZ #19156] * sysdeps/ieee754/ldbl-128/e_j0l.c (__ieee754_j0l): Return 1 for arguments very close to 0. |
|
Tulio Magno Quites Machado Filho
|
6ec52bf634 |
PowerPC: Fix a race condition when eliding a lock
The previous code used to evaluate the preprocessor token is_lock_free to a variable before starting a transaction. This behavior can cause an error if another thread got the lock (without using a transaction) between the evaluation of the token and the beginning of the transaction. This bug can be triggered with the following order of events: 1. The lock accessed by is_lock_free is free. 2. Thread T1 evaluates is_lock_free and stores into register R1 that the lock is free. 3. Thread T2 acquires the same lock used in is_lock_free. 4. T1 begins the transaction, creating a memory barrier where is_lock_free is false, but R1 is true. 5. T1 reads R1 and doesn't abort the transaction. 6. T1 calls ELIDE_UNLOCK, which reads false from is_lock_free and decides to unlock a lock acquired by T2, leading to undefined behavior. This patch delays the evaluation of is_lock_free to inside a transaction by moving this part of the code to the macro ELIDE_LOCK. [BZ #18743] * sysdeps/powerpc/nptl/elide.h (__elide_lock): Move most of this code to... (ELIDE_LOCK): ...here. (__get_new_count): New function with part of the code from __elide_lock that updates the value of adapt_count after a transaction abort. (__elided_trylock): Moved this code to... (ELIDE_TRYLOCK): ...here. |
|
|
Mike Frysinger
|
bc148ca1b1 |
timezone: document new --disable-timezone-tools option
Reported-by: Joseph Myers <joseph@codesourcery.com> |
|
|
Florian Weimer
|
f546f87c4f |
The va_list pointer is unspecified after a call to vfprintf [BZ #18982]
This adjusts the documentation to the existing implementation. |
|
Gunnar Hjalmarsson
|
213938ee8a |
lt_LT: change currency symbol to the euro [BZ #18953]
Lithuania switched currency to the Euro on 1st Jan 2015. |
|
|
Egmont Koblinger
|
c7266a2d82 |
hu_HU: change time separator to colon [BZ #18918]
The previous (11th) version of the Hungarian spelling rules (released in 1984) said that the separator had to be a dot, e.g. 10.35 meaning 10 o'clock 35 minutes. glibc correctly implements this. The brand new (12th) version, in effect since September 1, 2015 adopts to the common use of colon (especially in the digital world) and allows to use either separator, without even expressing a preference. For computer systems, using colons is way more typical and probably easier to recognize. Dot is typically used in printed materials. It also avoids an almost ambiguous situation where a space makes a difference, e.g. "10.15-ig" means "until 10 o'clock 15 minutes" whereas "10. 15-ig" means "until 15th of October". So I believe using the colon as the separator is not only more frequent in the computer world, but is also easier and quicker to recognize for the brain that it's about hour:minute rather than month and day. And luckily it's now equally correct according to the official rules. 11th edition: http://helyesiras.mta.hu/helyesiras/default/akh11 12th edition: http://helyesiras.mta.hu/helyesiras/default/akh12 In both editions it's the very last (299th and 300th, respectively) rule. Microsoft also uses and recommends a colon since at least May 2011: http://download.microsoft.com/download/e/6/1/e61266b2-d8b4-4fe0-a553-f01dc3976675/hun-hun-StyleGuide.pdf The time format is different in common language and in the language of IT. In common texts we usually do not abbreviate, so the full forms are used: “7 óra 10 perckor csörgött a telefon”. However, the short format, consisting of numerals only, can also be used. In this case a period must be used between the two numbers and there must not be a space between them: “találkozzunk 10.45-kor”. However, in software mostly the short format is used, and the numbers are separated by a colon. An obvious example is the clock in the bottom right corner of your screen, thus 18:31. |
|
H.J. Lu
|
b994fd7937 |
Remove i386/epoll_pwait.S
Only i386 implements epoll_pwait in assembly code withot cancellation
support. All other architectures implement epoll_pwait in epoll_pwait.c
with
int epoll_pwait (int epfd, struct epoll_event *events,
int maxevents, int timeout,
const sigset_t *set)
{
return SYSCALL_CANCEL (epoll_pwait, epfd, events, maxevents,
timeout, set, _NSIG / 8);
}
Although there is no test for epoll_pwait in glibc, since SYSCALL_CANCEL
works on i386 and epoll_pwait.c works for other architectures, it is
safe to assume that epoll_pwait.c with SYSCALL_CANCEL also works on
i386.
[BZ #19137]
* sysdeps/unix/sysv/linux/i386/Makefile (CFLAGS-epoll_pwait.c):
Add -fomit-frame-pointer.
* sysdeps/unix/sysv/linux/i386/epoll_pwait.S: Remove file.
|
|
|
Florian Weimer
|
a014cecd82 |
Always enable pointer guard [BZ #18928]
Honoring the LD_POINTER_GUARD environment variable in AT_SECURE mode
has security implications. This commit enables pointer guard
unconditionally, and the environment variable is now ignored.
[BZ #18928]
* sysdeps/generic/ldsodefs.h (struct rtld_global_ro): Remove
_dl_pointer_guard member.
* elf/rtld.c (_rtld_global_ro): Remove _dl_pointer_guard
initializer.
(security_init): Always set up pointer guard.
(process_envvars): Do not process LD_POINTER_GUARD.
|
|
|
Joseph Myers
|
0c25f5b5bb |
Fix powerpc32 lround, lroundf spurious exceptions (bug 19134).
The powerpc32 implementation of lround and lroundf can produce spurious exceptions from adding 0.5 then converting to integer. This includes "inexact" from the conversion to integer (not allowed for integer arguments to these functions), and, for larger integer arguments, "inexact", and "overflow" when rounding upward, from the addition. In addition, "inexact" is not allowed together with "invalid" and so inexact addition must be avoided when the integer will be out of range of 32-bit long, whether or not the argument is an integer. This patch fixes these problems. As in the powerpc64 llround implementation, a check is added for too-large arguments; in the powerpc64 case that means arguments at least 2^52 in magnitude (so that 0.5 cannot be added exactly), while in this case it means arguments for which the result would overflow "long". In those cases a suitable overflowing value is used for the integer conversion without adding 0.5, while for smaller arguments it's tested whether the argument is an integer (by adding and subtracting 2^52 to the absolute value and comparing with the original absolute value) to avoid adding 0.5 to integers and generating spurious "inexact". This code is not used when the power5+ sysdeps directories are used, as there's a separate power5+ version of these functions.. Tested for powerpc. This gets test-float (for a default powerpc32 hard-float build without any --with-cpu) back to the point where it should pass once powerpc ulps are regenerated; test-double still needs another problem with exceptions fixed to get back to that point (and I haven't looked lately at what default powerpc64 results are like). [BZ #19134] * sysdeps/powerpc/powerpc32/fpu/s_lround.S (.LC1): New object. (.LC2): Likewise. (.LC3): Likewise. (__lround): Do not add 0.5 to integer or out-of-range arguments. |
|
Szabolcs Nagy
|
1fae5a6800 |
[BZ #19129][ARM] Fix _dl_tlsdesc_resolve_hold to save r0
_dl_tlsdesc_resolve_hold calls into a C function that clobbers r0, but it assumes the original argument is still in r0 after the call. This can cause crash in case of concurrent TLS access when TLSDESC is in use (-mtls-dialect=gnu2). Run into this while fixing BZ 18572. Both r0 and r1 are saved/restored so the stack remains 8 byte aligned. [BZ #19129] * sysdeps/arm/dl-tlsdesc.S (_dl_tlsdesc_resolve_hold): Save and restore r0 and r1. |
|
|
Florian Weimer
|
f463c7b183 |
Fix double-checked locking in _res_hconf_reorder_addrs [BZ #19074]
[BZ #19074] * resolv/res_hconf.c (_res_hconf_reorder_addrs): Use atomics to load and store num_ifs. |
|
|
H.J. Lu
|
d3d9c95aef |
Support PLT and GOT references in local PIC check
Linker in binutils 2.26 and newer generate GOT references instead PLT references when -z now is passed to linker. We need to extend scripts/localplt.awk to allow PLT or GOT references. [BZ #19007] * scripts/localplt.awk: Also allow GOT references. * sysdeps/unix/sysv/linux/i386/localplt.data: Mark _Unwind_Find_FDE, calloc, memalign, realloc and __libc_memalign with "+ REL R_386_GLOB_DAT". * sysdeps/x86_64/localplt.data: Mark calloc, memalign, realloc and __libc_memalign with "+ RELA R_X86_64_GLOB_DAT". |
|
|
Joseph Myers
|
d7025badd8 |
Fix powerpc32 llround, llroundf exceptions (bug 19125).
The powerpc32 implementations of llroundf and llround produce spurious and missing exceptions (some arising from such exceptions from conversions to long long, some present even when fctidz is used). This patch fixes those problems in a similar way to the llrint / llrintf fixes. The spurious exceptions in the fctidz case for large arguments arise from a converted value that saturated as LLONG_MAX being converted back to float or double (the conversion back being inexact, but "inexact" must not be raised together with "invalid"), and from the subtraction x - xrf also being inexact for sufficiently large arguments (whether the saturation was to LLONG_MAX or LLONG_MIN); those are fixed by returning early if the argument is large enough that no rounding is needed. This code is not used for --with-cpu=power4 builds (I suspect the code used in that case may also produce spurious "inexact" exceptions, but that's something to investigate later). Tested for powerpc. [BZ #19125] * sysdeps/powerpc/powerpc32/fpu/s_llround.c: Include <limits.h>, <math_private.h> and <stdint.h>. (__llround): Avoid conversions to and from long long int, and subtractions, where those might raise spurious exceptions. * sysdeps/powerpc/powerpc32/fpu/s_llroundf.c: Include <math_private.h> and <stdint.h>. (__llroundf): Avoid conversions to and from long long int, and subtractions, where those might raise spurious exceptions. |
|
|
H.J. Lu
|
0a5768fe9c |
Support x86-64 assmebler without AVX512
When x86-64 assmebler doesn't support AVX512, we should make _dl_runtime_resolve_avx512/_dl_runtime_profile_avx512 as aliases of _dl_runtime_resolve_avx/_dl_runtime_profile_avx. Tested on x86-64 using GCC 5.2 with binutils 20151008 and GCC 4.8 with binutils 20130219. There are no differences in ld.so with binutils 20151008. There are no unexpected failures with binutils 20130219 and 20151008. [BZ #19124] * sysdeps/x86_64/dl-trampoline.S [!HAVE_AVX512_ASM_SUPPORT] (_dl_runtime_resolve_avx512): Make it a hidden alias of _dl_runtime_resolve_avx. (_dl_runtime_profile_avx512): Make it a hidden alias of _dl_runtime_profile_avx. |
|
|
Joseph Myers
|
e8dab9477f |
Fix powerpc32 llrint, llrintf bad exceptions (bug 16422).
The versions of llrint and llrintf for older powerpc32 processors convert the results of __rint / __rintf to long long int, resulting in spurious exceptions from such casts in certain cases. This patch makes glibc work around the problems with the libgcc conversions when the compiler used to build glibc doesn't use the fctidz instruction for them. Tested for powerpc. [BZ #16422] * sysdeps/powerpc/powerpc32/fpu/configure.ac (libc_cv_ppc_fctidz): New configure test. * sysdeps/powerpc/powerpc32/fpu/configure: Regenerated. * config.h.in [_LIBC] (HAVE_PPC_FCTIDZ): New macro. * sysdeps/powerpc/powerpc32/fpu/s_llrint.c: Include <limits.h>, <math_private.h> and <stdint.h>. (__llrint): Avoid conversions to long long int where those might raise spurious exceptions. * sysdeps/powerpc/powerpc32/fpu/s_llrintf.c: Include <math_private.h> and <stdint.h>. (__llrintf): Avoid conversions to long long int where those might raise spurious exceptions. |
|
|
Joseph Myers
|
f1226a2ae3 |
Fix llrint, llround missing exceptions for ARM (bug 15470).
Similar to the recent fix for MIPS, ARM is also missing correct exceptions on overflow from llrint and llround functions because casts from floating-point types to long long do not result in correct exceptions on overflow. This patch enables the fix for this for ARM. Tested for ARM. [BZ #15470] * sysdeps/arm/fix-fp-int-convert-overflow.h: New file. |
|
|
Joseph Myers
|
06d97e5e61 |
Fix lrint, llrint, lround, llround missing exceptions for MIPS (bug 16399).
For 32-bit MIPS and some other systems, various of the lrint, llrint, lround, llround functions can be missing exceptions on overflow because casts do not (in current GCC) result in the proper exceptions. In the MIPS case there are two problems here: MIPS I code generation uses an assembler macro that doesn't raise exceptions, while the libgcc conversions of floating-point values to long long also do not raise "invalid" on all overflow cases (and can raise spurious "inexact"). This patch adds support in the generic code (only the functions for which this problem has actually been seen) for forcing the "invalid" exception in the problem cases, and enables that support for the affected MIPS cases. Tested for MIPS; also tested for x86_64 and x86 that installed stripped shared libraries are unchanged by this patch. [BZ #16399] * sysdeps/generic/fix-fp-int-convert-overflow.h: New file. * sysdeps/ieee754/dbl-64/s_llrint.c: Include <fenv.h>, <limits.h> and <fix-fp-int-convert-overflow.h>. (__llrint) [FE_INVALID]: Force FE_INVALID exception as needed if FIX_DBL_LLONG_CONVERT_OVERFLOW. * sysdeps/ieee754/dbl-64/s_llround.c: Include <fenv.h>, <limits.h> and <fix-fp-int-convert-overflow.h>. (__llround) [FE_INVALID]: Force FE_INVALID exception as needed if FIX_DBL_LLONG_CONVERT_OVERFLOW. * sysdeps/ieee754/dbl-64/s_lrint.c: Include <fix-fp-int-convert-overflow.h>. (__lrint) [FE_INVALID]: Force FE_INVALID exception as needed if FIX_DBL_LLONG_CONVERT_OVERFLOW. * sysdeps/ieee754/dbl-64/s_lround.c: Include <fix-fp-int-convert-overflow.h>. (__lround) [FE_INVALID]: Force FE_INVALID exception as needed if FIX_DBL_LLONG_CONVERT_OVERFLOW. * sysdeps/ieee754/flt-32/s_llrintf.c: Include <fenv.h>, <limits.h> and <fix-fp-int-convert-overflow.h>. (__llrintf) [FE_INVALID]: Force FE_INVALID exception as needed if FIX_DBL_LLONG_CONVERT_OVERFLOW. * sysdeps/ieee754/flt-32/s_llroundf.c: Include <fenv.h>, <limits.h> and <fix-fp-int-convert-overflow.h>. (__llroundf) [FE_INVALID]: Force FE_INVALID exception as needed if FIX_DBL_LLONG_CONVERT_OVERFLOW. * sysdeps/ieee754/flt-32/s_lrintf.c: Include <fenv.h>, <limits.h> and <fix-fp-int-convert-overflow.h>. (__lrintf) [FE_INVALID]: Force FE_INVALID exception as needed if FIX_DBL_LLONG_CONVERT_OVERFLOW. * sysdeps/ieee754/flt-32/s_lroundf.c: Include <fenv.h>, <limits.h> and <fix-fp-int-convert-overflow.h>. (__lroundf) [FE_INVALID]: Force FE_INVALID exception as needed if FIX_DBL_LLONG_CONVERT_OVERFLOW. * sysdeps/mips/mips32/fpu/fix-fp-int-convert-overflow.h: New file. |
|
|
Joseph Myers
|
0e069029a8 |
Fix dbl-64 lrint for 64-bit long (bug 19095).
The dbl-64 implementation of lrint produces incorrect results for some arguments with 64-bit long because a 32-bit (unsigned) low part of the mantissa is shifted left, losing high bits in the process. This patch fixes this by casting to long int before shifting, as in lround (as this case only applies for 64-bit long, there are no issues with sign-extension). Tested for mips64 (n64). [BZ #19095] * sysdeps/ieee754/dbl-64/s_lrint.c (__lrint): Cast low part of mantissa to long int before shifting left. |
|
|
Joseph Myers
|
d0d286d32d |
Fix lrint, llrint missing exceptions close to overflow threshold (bug 19094).
The dbl-64, ldbl-96 and ldbl-128 implementations of lrint and llrint fail to produce "invalid" exceptions in cases where the rounded result overflows the target type, but truncating the floating-point argument to the next integer towards zero does not overflow it (so in particular casts do not produce such exceptions). (This issue cannot arise for float, or for double with 64-bit target type, or for ldbl-96 with 64-bit target type and negative arguments, because of insufficient precision in the floating-point type for arguments with the relevant property to exist. It also obviously cannot arise in FE_TOWARDZERO mode.) This patch fixes these problems by inserting checks for the special cases that can occur in each implementation, and explicitly raising FE_INVALID (and avoiding the cast if it might raise spurious FE_INEXACT, while raising FE_INEXACT explicitly in the cases where it is needed; unlike lround and llround, FE_INEXACT is required, not optional, for these functions for a within-range inexact result). The fixes are conditional on FE_INVALID or FE_INEXACT being defined. If any future architecture supports one but not both of those exceptions, the code will fail to compile and need fixing to handle that case (this seemed better than conditioning on both macros being defined, resulting in code that would compile but quietly miss exceptions on such a system). Tested for x86_64, x86 and mips64. Tested the ldbl-96 changes (only relevant for ia64, it appears) on x86_64 by removing the x86_64 versions of lrintl / llrintl. [BZ #19094] * sysdeps/ieee754/dbl-64/s_lrint.c: Include <fenv.h> and <limits.h>. (__lrint) [FE_INVALID || FE_INEXACT]: Force FE_INVALID exception when result overflows but exception would not result from cast. * sysdeps/ieee754/ldbl-128/s_llrintl.c: Include <fenv.h> and <limits.h>. (__llrintl) [FE_INVALID || FE_INEXACT]: Force FE_INVALID exception when result overflows but exception would not result from cast. * sysdeps/ieee754/ldbl-128/s_lrintl.c: Include <fenv.h> and <limits.h>. (__lrintl) [FE_INVALID || FE_INEXACT]: Force FE_INVALID exception when result overflows but exception would not result from cast. * sysdeps/ieee754/ldbl-96/s_llrintl.c: Include <fenv.h> and <limits.h>. (__llrintl) [FE_INVALID || FE_INEXACT]: Force FE_INVALID exception when result overflows but exception would not result from cast. * sysdeps/ieee754/ldbl-96/s_lrintl.c: Include <fenv.h> and <limits.h>. (__lrintl) [FE_INVALID || FE_INEXACT]: Force FE_INVALID exception when result overflows but exception would not result from cast. * math/libm-test.inc (lrint_test_data): Add more tests. (llrint_test_data): Likewise. |
|
|
Carlos O'Donell
|
87701a58e2 |
strcoll: Remove incorrect STRDIFF-based optimization (Bug 18589).
The optimization introduced in commit
|