This fixes a test build failure on Hurd.
Fixes commit 145097dff1 ("x86: Use separate
variable for TLSDESC XSAVE/XSAVEC state size (bug 32810)").
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
(cherry picked from commit c6e2895695)
Previously, the initialization code reused the xsave_state_full_size
member of struct cpu_features for the TLSDESC state size. However,
the tunable processing code assumes that this member has the
original XSAVE (non-compact) state size, so that it can use its
value if XSAVEC is disabled via tunable.
This change uses a separate variable and not a struct member because
the value is only needed in ld.so and the static libc, but not in
libc.so. As a result, struct cpu_features layout does not change,
helping a future backport of this change.
Fixes commit 9b7091415a ("x86-64:
Update _dl_tlsdesc_dynamic to preserve AMX registers").
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
(cherry picked from commit 145097dff1)
If we have to use XSAVE or XSAVEC trampolines, do not adjust the size
information they need. Technically, it is an operator error to try to
run with -XSAVE,-XSAVEC on such builds, but this change here disables
some unnecessary code with higher ISA levels and simplifies testing.
Related to commit befe2d3c4d
("x86-64: Don't use SSE resolvers for ISA level 3 or above").
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
(cherry picked from commit 59585ddaa2)
On SPR, it improves atanh bench performance by:
Before After Improvement
reciprocal-throughput 15.1715 14.8628 2%
latency 57.1941 56.1883 2%
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
(cherry picked from commit c7c4a5906f)
On SPR, it improves sinh bench performance by:
Before After Improvement
reciprocal-throughput 14.2017 11.815 17%
latency 36.4917 35.2114 4%
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
(cherry picked from commit dded0d20f6)
On Skylake, it improves tanh bench performance by:
Before After Improvement
max 110.89 95.826 14%
min 20.966 20.157 4%
mean 30.9601 29.8431 4%
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
(cherry picked from commit c6352111c7)
When -mapxf is used to build glibc, the resulting glibc will never run
on FMA4 machines. Exclude FMA4 IFUNC functions when -mapxf is used.
This requires GCC which defines __APX_F__ for -mapxf with commit:
1df56719bd8 x86: Define __APX_F__ for -mapxf
Reviewed-by: Sunil K Pandey <skpgkp2@gmail.com>
(cherry picked from commit 9e1f4aef86)
Due to the extensible nature of the rseq area we can't explictly
initialize fields that are not part of the ABI yet. It was agreed with
upstream that all new fields will be documented as zero initialized by
userspace. Future kernels configured with CONFIG_DEBUG_RSEQ will
validate the content of all fields during registration.
Replace the explicit field initialization with a memset of the whole
rseq area which will cover fields as they are added to future kernels.
Signed-off-by: Michael Jeanson <mjeanson@efficios.com>
Reviewed-by: Florian Weimer <fweimer@redhat.com>
(cherry picked from commit 689a62a421)
GCC aligns global data to 16 bytes if their size is >= 16 bytes. This patch
changes the exp_data struct slightly so that the fields are better aligned
and without gaps. As a result on targets that support them, more load-pair
instructions are used in exp. Exp10 is improved by moving invlog10_2N later
so that neglog10_2hiN and neglog10_2loN can be loaded using load-pair.
The exp benchmark improves 2.5%, "144bits" by 7.2%, "768bits" by 12.7% on
Neoverse V2. Exp10 improves by 1.5%.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
(cherry picked from commit 5afaf99edb)
Add SVE memset based on the generic memset with predicated load for sizes < 16.
Unaligned memsets of 128-1024 are improved by ~20% on average by using aligned
stores for the last 64 bytes. Performance of random memset benchmark improves
by ~2% on Neoverse V1.
Reviewed-by: Yury Khrustalev <yury.khrustalev@arm.com>
(cherry picked from commit 163b1bbb76)
GCC aligns global data to 16 bytes if their size is >= 16 bytes. This patch
changes the exp2f_data struct slightly so that the fields are better aligned.
As a result on targets that support them, load-pair instructions accessing
poly_scaled and invln2_scaled are now 16-byte aligned.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
(cherry picked from commit 44fa9c1080)
Remove ZVA 128 support from memset - the new memset no longer
guarantees count >= 256, which can result in underflow and a
crash if ZVA size is 128 ([1]). Since only one CPU uses a ZVA
size of 128 and its memcpy implementation was removed in commit
e162ab2bf1, remove this special
case too.
[1] https://sourceware.org/pipermail/libc-alpha/2024-November/161626.html
Reviewed-by: Andrew Pinski <quic_apinski@quicinc.com>
(cherry picked from commit a08d9a52f9)
Improve small memsets by avoiding branches and use overlapping stores.
Use DC ZVA for copies over 128 bytes. Remove unnecessary code for ZVA sizes
other than 64 and 128. Performance of random memset benchmark improves by 24%
on Neoverse N1.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
(cherry picked from commit cec3aef324)
Improve performance by handling another 16 bytes before entering the loop.
Use ADDHN in the loop to avoid SHRN+FMOV when it terminates. Change final
size computation to avoid increasing latency. On Neoverse V1 performance
of the random strlen benchmark improves by 4.6%.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
(cherry picked from commit 3dc426b642)
Reduce memory access by using lanewise MLA and moving constants to struct
and reduce number of MOVPRFXs.
Update maximum ULP error for double log_sve from 1 to 2.
Speedup on Neoverse V1 for log (3%), log2 (5%), and log10 (4%).
(cherry picked from commit 32d193a372)
Load the polynomial evaluation coefficients into 2 vectors and use lanewise MLAs.
8% improvement in throughput microbenchmark on Neoverse V1.
Reviewed-by: Wilco Dijkstra <Wilco.Dijkstra@arm.com>
(cherry picked from commit 6914774b9d)
Load the polynomial evaluation coefficients into 2 vectors and use lanewise MLAs.
8% improvement in throughput microbenchmark on Neoverse V1 for log2 and log,
and 2% for log10.
Reviewed-by: Wilco Dijkstra <Wilco.Dijkstra@arm.com>
(cherry picked from commit d6e034f5b2)
Remove spurious ADRP and a few MOVs.
Reduce memory access by using more indexed MLAs in polynomial.
Align notation so that algorithms are easier to compare.
Speedup on Neoverse V1 for log10 (8%), log (8.5%), and log2 (10%).
Update error threshold in AdvSIMD log (now matches SVE log).
(cherry picked from commit 8eb5ad2ebc)
This operation can be simplified to use simpler multiply-round-convert
sequence, which uses fewer instructions and constants.
Reviewed-by: Wilco Dijkstra <Wilco.Dijkstra@arm.com>
(cherry picked from commit 16a59571e4)
Since the last operation is destructive, the first argument to the FMA
also has to be the first argument to the special-case in order to
avoid unnecessary MOVs. Reorder arguments and adjust special-case
bounds to facilitate this.
Reviewed-by: Wilco Dijkstra <Wilco.Dijkstra@arm.com>
(cherry picked from commit 8b09af572b)
Previously many routines used * to load from vector types stored
in the data table. This is emitted as ldr, which byte-swaps the
entire vector register, and causes bugs for big-endian when not
all lanes contain the same value. When a vector is to be used
this way, it has been replaced with an array and the load with an
explicit ld1 intrinsic, which byte-swaps only within lanes.
As well, many routines previously used non-standard GCC syntax
for vector operations such as indexing into vectors types with []
and assembling vectors using {}. This syntax should not be mixed
with ACLE, as the former does not respect endianness whereas the
latter does. Such examples have been replaced with, for instance,
vcombine_* and vgetq_lane* intrinsics. Helpers which only use the
GCC syntax, such as the v_call helpers, do not need changing as
they do not use intrinsics.
Reviewed-by: Szabolcs Nagy <szabolcs.nagy@arm.com>
(cherry picked from commit 90a6ca8b28)
Use the __progname symbol to override the program name to induce the
failure that CVE-2025-0395 describes.
This is related to BZ #32582
Signed-off-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
(cherry picked from commit cdb9ba8419)
Add a test for setenv with updated environ. Verify that BZ #32588 is
fixed.
Signed-off-by: H.J. Lu <hjl.tools@gmail.com>
Reviewed-by: Florian Weimer <fweimer@redhat.com>
(cherry picked from commit 8ab34497de)
Similar to a9944a52c9 and
f9493a15ea, we need to hide calloc use from
the compiler to accommodate GCC's r15-6566-g804e9d55d9e54c change.
First, include tst-malloc-aux.h, but then use `volatile` variables
for size.
The test passes without the tst-malloc-aux.h change but IMO we want
it there for consistency and to avoid future problems (possibly silent).
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
(cherry picked from commit c3d1dac96b)
Since -1 isn't a power of two, compiler may reject it, hide memalign from
Clang 19 which issues an error:
tst-memalign.c:86:31: error: requested alignment is not a power of 2 [-Werror,-Wnon-power-of-two-alignment]
86 | p = memalign (-1, pagesize);
| ^~
tst-memalign.c:86:31: error: requested alignment must be 4294967296 bytes or smaller; maximum alignment assumed [-Werror,-Wbuiltin-assume-aligned-alignment]
86 | p = memalign (-1, pagesize);
| ^~
Update tst-malloc-aux.h to hide all malloc functions and include it in
all malloc tests to prevent compiler from optimizing out any malloc
functions.
Tested with Clang 19.1.5 and GCC 15 20241206 for BZ #32366.
Signed-off-by: H.J. Lu <hjl.tools@gmail.com>
Reviewed-by: Sam James <sam@gentoo.org>
(cherry picked from commit f9493a15ea)
Include the space needed to store the length of the message itself, in
addition to the message string. This resolves BZ #32582.
Signed-off-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Reviewed: Adhemerval Zanella <adhemerval.zanella@linaro.org>
(cherry picked from commit 68ee0f704c)
The loop should be aligned to 32-bytes so that it can ideally run out
the DSB. This is particularly important on Skylake-Server where
deficiencies in it's DSB implementation make it prone to not being
able to run loops out of the DSB.
For example running strcmp-evex on 200Mb string:
32-byte aligned loop:
- 43,399,578,766 idq.dsb_uops
not 32-byte aligned loop:
- 6,060,139,704 idq.dsb_uops
This results in a 25% performance degradation for the non-aligned
version.
The fix is to just ensure the code layout is such that the loop is
aligned. (Which was previously the case but was accidentally dropped
in 84e7c46df).
NB: The fix was actually 64-byte alignment. This is because 64-byte
alignment generally produces more stable performance than 32-byte
aligned code (cache line crosses can affect perf), so if we are going
past 16-byte alignmnent, might as well go to 64. 64-byte alignment
also matches most other functions we over-align, so it creates a
common point of optimization.
Times are reported as ratio of Time_With_Patch /
Time_Without_Patch. Lower is better.
The values being reported is the geometric mean of the ratio across
all tests in bench-strcmp and bench-strncmp.
Note this patch is only attempting to improve the Skylake-Server
strcmp for long strings. The rest of the numbers are only to test for
regressions.
Tigerlake Results Strings <= 512:
strcmp : 1.026
strncmp: 0.949
Tigerlake Results Strings > 512:
strcmp : 0.994
strncmp: 0.998
Skylake-Server Results Strings <= 512:
strcmp : 0.945
strncmp: 0.943
Skylake-Server Results Strings > 512:
strcmp : 0.778
strncmp: 1.000
The 2.6% regression on TGL-strcmp is due to slowdowns caused by
changes in alignment of code handling small sizes (most on the
page-cross logic). These should be safe to ignore because 1) We
previously only 16-byte aligned the function so this behavior is not
new and was essentially up to chance before this patch and 2) this
type of alignment related regression on small sizes really only comes
up in tight micro-benchmark loops and is unlikely to have any affect
on realworld performance.
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
(cherry picked from commit 483443d321)
Previously we use `rep stosb` for all medium/large memsets. This is
notably worse than non-temporal stores for large (above a
few MBs) memsets.
See:
https://docs.google.com/spreadsheets/d/1opzukzvum4n6-RUVHTGddV6RjAEil4P2uMjjQGLbLcU/edit?usp=sharing
For data using different stategies for large memset on ICX and SKX.
Using non-temporal stores can be up to 3x faster on ICX and 2x faster
on SKX. Historically, these numbers would not have been so good
because of the zero-over-zero writeback optimization that `rep stosb`
is able to do. But, the zero-over-zero writeback optimization has been
removed as a potential side-channel attack, so there is no longer any
good reason to only rely on `rep stosb` for large memsets. On the flip
size, non-temporal writes can avoid data in their RFO requests saving
memory bandwidth.
All of the other changes to the file are to re-organize the
code-blocks to maintain "good" alignment given the new code added in
the `L(stosb_local)` case.
The results from running the GLIBC memset benchmarks on TGL-client for
N=20 runs:
Geometric Mean across the suite New / Old EXEX256: 0.979
Geometric Mean across the suite New / Old EXEX512: 0.979
Geometric Mean across the suite New / Old AVX2 : 0.986
Geometric Mean across the suite New / Old SSE2 : 0.979
Most of the cases are essentially unchanged, this is mostly to show
that adding the non-temporal case didn't add any regressions to the
other cases.
The results on the memset-large benchmark suite on TGL-client for N=20
runs:
Geometric Mean across the suite New / Old EXEX256: 0.926
Geometric Mean across the suite New / Old EXEX512: 0.925
Geometric Mean across the suite New / Old AVX2 : 0.928
Geometric Mean across the suite New / Old SSE2 : 0.924
So roughly a 7.5% speedup. This is lower than what we see on servers
(likely because clients typically have faster single-core bandwidth so
saving bandwidth on RFOs is less impactful), but still advantageous.
Full test-suite passes on x86_64 w/ and w/o multiarch.
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
(cherry picked from commit 5bf0ab8057)
Some hypervisors report 1 TiB L3 cache size. This results
in some variables incorrectly getting zeroed, causing crashes
in memcpy/memmove because invariants are violated.
(cherry picked from commit 61c3450db9)
Since internal tests don't have access to internal symbols in libm,
exclude them for internal tests. Also make tst-strtod5 and tst-strtod5i
depend on $(libm) to support older versions of GCC which can't inline
copysign family functions. This fixes BZ #32414.
Signed-off-by: H.J. Lu <hjl.tools@gmail.com>
Reviewed-by: Sunil K Pandey <skpgkp2@gmail.com>
(cherry picked from commit 5df09b4448)
GCC 15 introduces allocation dead code removal (DCE) for PR117370 in
r15-5255-g7828dc070510f8. This breaks various glibc tests which want
to assert various properties of the allocator without doing anything
obviously useful with the allocated memory.
Alexander Monakov rightly pointed out that we can and should do better
than passing -fno-malloc-dce to paper over the problem. Not least because
GCC 14 already does such DCE where there's no testing of malloc's return
value against NULL, and LLVM has such optimisations too.
Handle this by providing malloc (and friends) wrappers with a volatile
function pointer to obscure that we're calling malloc (et. al) from the
compiler.
Reviewed-by: Paul Eggert <eggert@cs.ucla.edu>
(cherry picked from commit a9944a52c9)
Since -r in GCC 6/7/8 doesn't imply -nostdlib -nostartfiles, update the
link-static-libc.out rule to also pass -nostdlib -nostartfiles. This
fixes BZ #31753.
Signed-off-by: H.J. Lu <hjl.tools@gmail.com>
Reviewed-by: Florian Weimer <fweimer@redhat.com>
(cherry picked from commit 2be3352f0b)
When adding explicit initialization of rseq fields prior to
registration, I glossed over the fact that 'cpu_id_start' is also
documented as initialized by user-space.
While current kernels don't validate the content of this field on
registration, future ones could.
Signed-off-by: Michael Jeanson <mjeanson@efficios.com>
Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
(cherry picked from commit d9f40387d3)
Per the rseq syscall documentation, 3 fields are required to be
initialized by userspace prior to registration, they are 'cpu_id',
'rseq_cs' and 'flags'. Since we have no guarantee that 'struct pthread'
is cleared on all architectures, explicitly set those 3 fields prior to
registration.
Signed-off-by: Michael Jeanson <mjeanson@efficios.com>
Reviewed-by: Florian Weimer <fweimer@redhat.com>
(cherry picked from commit 97f60abd25)
In commit c628c22963 (elf: Remove
ldconfig kernel version check), the layout of auxcache entries
changed because the osversion field was removed from
struct aux_cache_file_entry. However, AUX_CACHEMAGIC was not
changed, so existing files are still used, potentially leading
to unintended ldconfig behavior. This commit changes AUX_CACHEMAGIC,
so that the file is regenerated.
Reported-by: DJ Delorie <dj@redhat.com>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
(cherry picked from commit 0a536f6e2f)
The test tst-strtod-underflow covers various edge cases close to the
underflow threshold for strtod (especially cases where underflow on
architectures with after-rounding tininess detection depends on the
rounding mode). Make it use the type-generic machinery, with
corresponding test inputs for each supported floating-point format, so
that other functions in the strtod family are tested for underflow
edge cases as well.
Tested for x86_64.
(cherry picked from commit 94ca2c0894)
Starting from glibc 2.1, crt1.o contains _IO_stdin_used which is checked
by _IO_check_libio to provide binary compatibility for glibc 2.0. Add
crt1-2.0.o for tests against glibc 2.0. Define tests-2.0 for glibc 2.0
compatibility tests. Add and update glibc 2.0 compatibility tests for
stderr, matherr and pthread_kill.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
(cherry picked from commit 5f245f3bfb)
There is very little test coverage of inputs to strtod-family
functions that don't contain anything that can be parsed as a number
(one test of ".y" in tst-strtod2), and none that I can see of skipping
initial whitespace. Add some tests of these things to tst-strtod2.
Tested for x86_64.
(cherry picked from commit 378039ca57)
Although there are some tests in tst-strtod2 and tst-strtod3 for the
end pointer provided by strtod when it doesn't parse the whole string,
they aren't very thorough. Add tests of more such cases to
tst-strtod2.
Tested for x86_64.
(cherry picked from commit b5d3737b30)
Some of the strtod tests use type-generic machinery in tst-strtod.h to
test the strto* functions for all floating types, while others only
test double even when the tests are in fact meaningful for all
floating types.
Convert tst-strtod2 and tst-strtod5 to use the type-generic machinery
so they test all floating types. I haven't tried to convert them to
use newer test interfaces in other ways, just made the changes
necessary to use the type-generic machinery.
Tested for x86_64.
(cherry picked from commit 8de031bcb9)
As reported in bug 32045, it's incorrect for strtod/nan functions to
set errno based on overflowing payload (strtod should only set errno
for overflow / underflow of its actual result, and potentially if
nothing in the string can be parsed as a number at all; nan should be
a pure function that never sets it). Save and restore errno around
the internal strtoull call and add associated test coverage.
Tested for x86_64.
(cherry picked from commit 64f62c47e9)
There are two separate sets of tests of NaN payloads in glibc:
* libm-test-{get,set}payload* verify that getpayload, setpayload,
setpayloadsig and __builtin_nan functions are consistent in their
payload handling.
* test-nan-payload verifies that strtod-family functions and the
not-built-in nan functions are consistent in their payload handling.
Nothing, however, connects the two sets of functions (i.e., verifies
that strtod / nan are consistent with getpayload / setpayload /
__builtin_nan).
Improve test-nan-payload to check actual payload value with getpayload
rather than just verifying that the strtod and nan functions produce
the same NaN. Also check that the NaNs produced aren't signaling and
extend the tests to cover _FloatN / _FloatNx.
Tested for x86_64.
(cherry picked from commit be77d5ae41)
Some of the strtod tests use type-generic machinery in tst-strtod.h to
test the strto* functions for all floating types, while others only
test double even when the tests are in fact meaningful for all
floating types.
Convert the tests of the internal __strtod_internal interface to cover
all floating types. I haven't tried to convert them to use newer test
interfaces in other ways, just made the changes necessary to use the
type-generic machinery. As an internal interface, there are no
aliases for different types with the same ABI (however,
__strtold_internal is defined even if long double has the same ABI as
double), so macros used by the type-generic testing code are redefined
as needed to avoid expecting such aliases to be present.
Tested for x86_64.
(cherry picked from commit 3fc063dee0)
As reported in bug 30220, the implementation of strtod-family
functions has a bug in the following case: the input string would,
with infinite exponent range, take one more bit to represent than is
available in the normal precision of the return type; the value
represented is in the subnormal range; and there are no nonzero bits
in the value, below those that can be represented in subnormal
precision, other than the least significant bit and possibly the
0.5ulp bit. In this case, round_and_return ends up discarding the
least significant bit.
Fix by saving that bit to merge into more_bits (it can't be merged in
at the time it's computed, because more_bits mustn't include this bit
in the case of after-rounding tininess detection checking if the
result is still subnormal when rounded to normal precision, so merging
this bit into more_bits needs to take place after that check).
Tested for x86_64.
(cherry picked from commit 457622c2fa)
Add tests of underflow in tst-strtod-round, and thus also test for
errno being unchanged when there is neither overflow nor underflow.
The errno setting before the function call to test for being unchanged
is adjusted to set errno to 12345 instead of 0, so that any bugs where
strtod sets errno to 0 would be detected.
This doesn't add any new test inputs for tst-strtod-round, and in
particular doesn't cover the edge cases of underflow the way
tst-strtod-underflow does (none of the existing test inputs for
tst-strtod-round actually exercise cases that have underflow with
before-rounding tininess detection but not with after-rounding
tininess detection), but at least it provides some coverage (as per
the recent discussions) that ordinary non-overflowing non-underflowing
inputs to these functions do not set errno.
Tested for x86_64.
(cherry picked from commit d73ed2601b)
We have no tests that errno is set to ERANGE on overflow of
strtod-family functions (we do have some tests for underflow, in
tst-strtod-underflow). Add such tests to tst-strtod-round.
Tested for x86_64.
(cherry picked from commit 207d64feb2)
There seem to be no glibc tests specifically for the fread function.
Add basic tests of that function.
Tested for x86_64.
(cherry picked from commit d14c977c65)
Florian Weimer
Sunil K Pandey
H.J. Lu
Michael Jeanson
Wilco Dijkstra
Yat Long Poon
Luna Lamb
Joana Cruz
Pierre Blanchard
Joe Ramsay
Siddhesh Poyarekar
Sam James
Noah Goldstein
Joseph Myers