Move test/* to test/initramfs/*

.dockerignore

@@ -1,6 +1,6 @@
 # Ignore binaries to avoid performance issues
 target/
-test/build/
+test/initramfs/build/
 
 # QEMU log file
 qemu.log

.github/actions/benchmark/action.yml

@@ -41,7 +41,7 @@ runs:
       shell: bash
       run: |
         make install_osdk
-        bash test/src/benchmark/bench_linux_and_aster.sh "${{ matrix.benchmarks }}" "${{ inputs.platform }}"
+        bash test/initramfs/src/benchmark/bench_linux_and_aster.sh "${{ matrix.benchmarks }}" "${{ inputs.platform }}"
         BENCHMARK_ARTIFACT=results_$(echo "${{ matrix.benchmarks }}" | tr '/' '-')
         echo "BENCHMARK_ARTIFACT=$BENCHMARK_ARTIFACT" >> $GITHUB_ENV
 
@@ -76,8 +76,8 @@ runs:
           BENCHMARK_DIR=$(echo "$benchmark_id" | sed 's/-/\//g')
           BENCHMARK_SUITE=$(echo "$BENCHMARK_DIR" | awk -F'/' '{print $1}')
           BENCHMARK_NAME=$(echo "$BENCHMARK_DIR" | sed -E 's|^[^/]+/||; s|/bench_results||g; s|/|_|g')
-          BENCH_RESULT_YAML="test/src/benchmark/${BENCHMARK_DIR}/bench_result.yaml"
-          [ -f "$BENCH_RESULT_YAML" ] || BENCH_RESULT_YAML="test/src/benchmark/${BENCHMARK_DIR}.yaml"
+          BENCH_RESULT_YAML="test/initramfs/src/benchmark/${BENCHMARK_DIR}/bench_result.yaml"
+          [ -f "$BENCH_RESULT_YAML" ] || BENCH_RESULT_YAML="test/initramfs/src/benchmark/${BENCHMARK_DIR}.yaml"
 
           if [ ! -f "$BENCH_RESULT_YAML" ]; then
             echo "Warning: YAML file not found for $benchmark_id at $BENCH_RESULT_YAML. Skipping config generation."
@@ -91,9 +91,9 @@ runs:
           DESCRIPTION=$(yq -r '.chart.description // "No description provided"' "$BENCH_RESULT_YAML")
 
           # Generate summary JSON if needed (only once per suite)
-          SUMMARY_JSON="test/src/benchmark/$BENCHMARK_SUITE/summary.json"
+          SUMMARY_JSON="test/initramfs/src/benchmark/$BENCHMARK_SUITE/summary.json"
           if [ ! -f "$SUMMARY_JSON" ]; then
-              SUMMARY_YAML="test/src/benchmark/$BENCHMARK_SUITE/summary.yaml"
+              SUMMARY_YAML="test/initramfs/src/benchmark/$BENCHMARK_SUITE/summary.yaml"
               if [ -f "$SUMMARY_YAML" ]; then
                 yq . "$SUMMARY_YAML" > "$SUMMARY_JSON"
                 echo "Generated $SUMMARY_JSON"

.typos.toml

@@ -35,8 +35,8 @@ check-file = false
 # Files listed below are ignored to check.
 [files]
 extend-exclude = [
-    "test/src/syscall/gvisor/blocklists/pty_test",
-    "test/build/initramfs/opt/gvisor/blocklists/pty_test",
-    "test/src/syscall/gvisor/blocklists/sync_test",
-    "test/build/initramfs/opt/gvisor/blocklists/sync_test",
+    "test/initramfs/src/syscall/gvisor/blocklists/pty_test",
+    "test/initramfs/build/initramfs/opt/gvisor/blocklists/pty_test",
+    "test/initramfs/src/syscall/gvisor/blocklists/sync_test",
+    "test/initramfs/build/initramfs/opt/gvisor/blocklists/sync_test",
 ]

Makefile

@@ -21,7 +21,7 @@ OSTD_TASK_STACK_SIZE_IN_PAGES ?= 64
 FEATURES ?=
 NO_DEFAULT_FEATURES ?= 0
 COVERAGE ?= 0
-# Specify whether to build regression tests under `test/src/apps`.
+# Specify whether to build regression tests under `test/initramfs/src/apps`.
 ENABLE_BASIC_TEST ?= false
 # Specify the primary system console (supported: hvc0, tty0).
 # - hvc0: The virtio-console terminal.
@@ -192,7 +192,7 @@ endif
 
 # Skip GZIP to make encoding and decoding of initramfs faster
 ifeq ($(INITRAMFS_SKIP_GZIP),1)
-CARGO_OSDK_INITRAMFS_OPTION := --initramfs=$(abspath test/build/initramfs.cpio)
+CARGO_OSDK_INITRAMFS_OPTION := --initramfs=$(abspath test/initramfs/build/initramfs.cpio)
 CARGO_OSDK_COMMON_ARGS += $(CARGO_OSDK_INITRAMFS_OPTION)
 endif
 
@@ -296,7 +296,7 @@ check_vdso:
 
 .PHONY: initramfs
 initramfs: check_vdso
-	@$(MAKE) --no-print-directory -C test
+	@$(MAKE) --no-print-directory -C test/initramfs
 
 # Build the kernel with an initramfs
 .PHONY: kernel
@@ -425,7 +425,7 @@ book:
 format:
 	@./tools/format_all.sh
 	@nixfmt ./distro
-	@$(MAKE) --no-print-directory -C test format
+	@$(MAKE) --no-print-directory -C test/initramfs format
 
 .PHONY: check
 check: initramfs $(CARGO_OSDK)
@@ -469,7 +469,7 @@ check: initramfs $(CARGO_OSDK)
 	done
 	@
 	@# Check formatting issues of the C code and Nix files (regression tests)
-	@$(MAKE) --no-print-directory -C test check
+	@$(MAKE) --no-print-directory -C test/initramfs check
 	@
 	@# Check typos
 	@typos
@@ -485,6 +485,6 @@ clean:
 	@echo "Cleaning up mdBook output files"
 	@cd book && mdbook clean
 	@echo "Cleaning up test target files"
-	@$(MAKE) --no-print-directory -C test clean
+	@$(MAKE) --no-print-directory -C test/initramfs clean
 	@echo "Uninstalling OSDK"
 	@rm -f $(CARGO_OSDK)

OSDK.toml

@@ -22,7 +22,7 @@ kcmd_args = [
     "init=/usr/bin/busybox",
 ]
 init_args = ["sh", "-l"]
-initramfs = "test/build/initramfs.cpio.gz"
+initramfs = "test/initramfs/build/initramfs.cpio.gz"
 
 # Special options for testing
 [test.qemu]
@@ -62,8 +62,8 @@ qemu.args = """\
     -serial chardev:mux \
     -monitor chardev:mux \
     -chardev stdio,id=mux,mux=on,signal=off,logfile=qemu.log \
-    -drive if=none,format=raw,id=x0,file=./test/build/ext2.img \
-    -drive if=none,format=raw,id=x1,file=./test/build/exfat.img \
+    -drive if=none,format=raw,id=x0,file=./test/initramfs/build/ext2.img \
+    -drive if=none,format=raw,id=x1,file=./test/initramfs/build/exfat.img \
     # NOTE: The `/etc/profile.d/init.sh` assumes that `ext2.img` appears as the first block device (`/dev/vda`).
     # The ordering below ensures `x1` (ext2.img) is discovered before `x0`, maintaining this assumption.
     # TODO: Once UUID-based mounting is implemented, this strict ordering will no longer be required.

book/src/kernel/advanced-instructions.md

@@ -34,7 +34,7 @@ cargo osdk test
 
 ### General Test
 
-The following command builds and runs the test binaries in `test/src/apps` directory on Asterinas.
+The following command builds and runs the test binaries in `test/initramfs/src/apps` directory on Asterinas.
 
 ```bash
 make run_kernel AUTO_TEST=test

kernel/src/fs/exfat/mod.rs

@@ -119,7 +119,7 @@ mod test {
         }
     }
     /// Exfat disk image
-    static EXFAT_IMAGE: &[u8] = include_bytes!("../../../../test/build/exfat.img");
+    static EXFAT_IMAGE: &[u8] = include_bytes!("../../../../test/initramfs/build/exfat.img");
 
     /// Read exfat disk image
     fn new_vm_segment_from_image() -> Segment<()> {

test/initramfs/README.md

@@ -1,6 +1,6 @@
-# Test Suite Overview
+# Initramfs-Based Test Suites
 
-This directory contains the test suites of Asterinas, including various test programs, benchmarks, syscall test suites, and necessary configuration files. The structure of the test directory is designed to be modular and flexible, supporting multiple CPU architectures and a streamlined workflow for building and running tests.
+This directory contains the test suites of Asterinas running in initramfs, including various test programs, benchmarks, syscall test suites, and necessary configuration files. The structure of the test directory is designed to be modular and flexible, supporting multiple CPU architectures and a streamlined workflow for building and running tests.
 
 ## Directory Structure
 
@@ -22,8 +22,6 @@ test/
 └── README.md
 ```
 
----
-
 ## Building and Packaging Tests
 
 Most tests in this directory are compiled and packaged using [Nix](https://nixos.org/), a powerful package manager. This ensures consistency and reproducibility across environments.
@@ -35,6 +33,7 @@ Most tests in this directory are compiled and packaged using [Nix](https://nixos
 While most tests rely on `Nix` for compilation, the `gvisor` syscall test suite currently cannot be built with `Nix`. Instead, the `gvisor` tests are compiled in the Docker image. For details, refer to `tools/docker/Dockerfile`.
 
 ### Multi-Architecture Support
+
 The test suite supports building for multiple architectures, including `x86_64` and `riscv64`. You can specify the desired architecture by running:
 
 ```bash
@@ -43,7 +42,7 @@ make kernel OSDK_TARGET_ARCH=x86_64
 make kernel OSDK_TARGET_ARCH=riscv64
 ```
 
-The build artifacts (initramfs) can be found in the `test/build` directory after the compilation.
+The build artifacts (initramfs) can be found in the `test/initramfs/build` directory after the compilation.
 
 ## Supported Benchmarks
 
@@ -70,11 +69,11 @@ These benchmarks are precompiled and packaged into the Docker image for convenie
 
 We recommend utilizing `Nix` when adding new benchmarks. To check if a benchmark is already available, use the [`Nix Package Search`](https://search.nixos.org/packages?channel=25.05). If a package exists in the Nix channel, you can directly use it or modify it if necessary.
 
-If the desired benchmark is not available or cannot be easily adapted, you can add a custom `.nix` file to package it manually. Place the `.nix` files under the `test/nix/benchmark` directory.
+If the desired benchmark is not available or cannot be easily adapted, you can add a custom `.nix` file to package it manually. Place the `.nix` files under the `test/initramfs/nix/benchmark` directory.
 
 ## Configuration Files
 
-Configuration files required by benchmarks or apps should be placed in the `test/src/etc` directory.
+Configuration files required by benchmarks or apps should be placed in the `test/initramfs/src/etc` directory.
 
 If additional configuration files or directories are needed, ensure they are appropriately packaged by updating the `initramfs.nix` file.