mirror of https://github.com/armbian/build.git
973 lines
19 KiB
Plaintext
973 lines
19 KiB
Plaintext
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
|
|
|
/dts-v1/;
|
|
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/leds/common.h>
|
|
#include <dt-bindings/soc/rockchip,vop2.h>
|
|
#include "rk3588.dtsi"
|
|
|
|
/ {
|
|
model = "HINLINK H88K";
|
|
compatible = "hinlink,h88k", "rockchip,rk3588";
|
|
|
|
aliases {
|
|
ethernet0 = &gmac0;
|
|
mmc0 = &sdhci;
|
|
mmc1 = &sdmmc;
|
|
mmc2 = &sdio;
|
|
};
|
|
|
|
analog-sound {
|
|
compatible = "simple-audio-card";
|
|
label = "rockchip,es8388-codec";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&hp_detect>;
|
|
simple-audio-card,name = "Analog";
|
|
simple-audio-card,format = "i2s";
|
|
simple-audio-card,mclk-fs = <256>;
|
|
simple-audio-card,hp-det-gpios = <&gpio1 RK_PD5 GPIO_ACTIVE_HIGH>;
|
|
simple-audio-card,bitclock-master = <&daicpu>;
|
|
simple-audio-card,frame-master = <&daicpu>;
|
|
|
|
simple-audio-card,widgets =
|
|
"Microphone", "Onboard Microphone",
|
|
"Microphone", "Microphone Jack",
|
|
"Speaker", "Speaker",
|
|
"Headphone", "Headphones";
|
|
|
|
simple-audio-card,routing =
|
|
"Headphones", "LOUT1",
|
|
"Headphones", "ROUT1",
|
|
"Speaker", "LOUT2",
|
|
"Speaker", "ROUT2",
|
|
|
|
/* single ended signal to LINPUT1 */
|
|
"LINPUT1", "Microphone Jack",
|
|
"RINPUT1", "Microphone Jack",
|
|
/* differential signal */
|
|
"LINPUT2", "Onboard Microphone",
|
|
"RINPUT2", "Onboard Microphone";
|
|
|
|
daicpu: simple-audio-card,cpu {
|
|
sound-dai = <&i2s0_8ch>;
|
|
system-clock-frequency = <12288000>;
|
|
};
|
|
|
|
daicodec: simple-audio-card,codec {
|
|
sound-dai = <&es8388>;
|
|
system-clock-frequency = <12288000>;
|
|
};
|
|
};
|
|
|
|
chosen {
|
|
stdout-path = "serial2:1500000n8";
|
|
};
|
|
|
|
leds {
|
|
compatible = "gpio-leds";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&led_net_en>, <&led_sata_en>,
|
|
<&led_user_en>, <&led_work_en>;
|
|
|
|
net {
|
|
label = "blue:net";
|
|
gpios = <&gpio2 RK_PC3 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
sata {
|
|
label = "amber:sata";
|
|
gpios = <&gpio2 RK_PC5 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
user {
|
|
label = "green:user";
|
|
gpios = <&gpio3 RK_PB7 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
work {
|
|
label = "red:work";
|
|
gpios = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>;
|
|
linux,default-trigger = "heartbeat";
|
|
};
|
|
};
|
|
|
|
hdmi0-con {
|
|
compatible = "hdmi-connector";
|
|
type = "a";
|
|
|
|
port {
|
|
hdmi0_con_in: endpoint {
|
|
remote-endpoint = <&hdmi0_out_con>;
|
|
};
|
|
};
|
|
};
|
|
|
|
hdmi1-con {
|
|
compatible = "hdmi-connector";
|
|
type = "a";
|
|
|
|
port {
|
|
hdmi1_con_in: endpoint {
|
|
remote-endpoint = <&hdmi1_out_con>;
|
|
};
|
|
};
|
|
};
|
|
|
|
rfkilli-wifi {
|
|
compatible = "rfkill-gpio";
|
|
label = "rfkill-pcie-wlan";
|
|
radio-type = "wlan";
|
|
shutdown-gpios = <&gpio3 RK_PB1 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
rfkill-bt {
|
|
compatible = "rfkill-gpio";
|
|
label = "rfkill-m2-bt";
|
|
radio-type = "bluetooth";
|
|
shutdown-gpios = <&gpio3 RK_PA6 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
vcc12v_dcin: vcc12v-dcin {
|
|
compatible = "regulator-fixed";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <12000000>;
|
|
regulator-max-microvolt = <12000000>;
|
|
regulator-name = "vcc12v_dcin";
|
|
};
|
|
|
|
vcc3v3_pcie30: vcc3v3-pcie30-regulator {
|
|
compatible = "regulator-fixed";
|
|
enable-active-high;
|
|
gpios = <&gpio3 RK_PD5 GPIO_ACTIVE_HIGH>;
|
|
regulator-name = "vcc3v3_pcie30";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
startup-delay-us = <5000>;
|
|
vin-supply = <&vcc12v_dcin>;
|
|
};
|
|
|
|
/* it's modem reset pin */
|
|
modem_enable: modem-enable {
|
|
compatible = "regulator-fixed";
|
|
enable-active-high;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
gpios = <&gpio4 RK_PC6 GPIO_ACTIVE_HIGH>;
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-name = "modem-enable";
|
|
vin-supply = <&vcc_3v3_s3>;
|
|
startup-delay-us = <500000>;
|
|
pinctrl-names = "default";
|
|
pintctrl-0 = <&modem_reset_en>;
|
|
};
|
|
|
|
vcc3v3_modem: vcc3v3-modem {
|
|
compatible = "regulator-fixed";
|
|
enable-active-high;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
gpios = <&gpio4 RK_PA3 GPIO_ACTIVE_HIGH>;
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-name = "vcc3v3_modem";
|
|
pinctrl-names = "default";
|
|
pintctrl-0 = <&modem_power_en>;
|
|
vin-supply = <&vcc_3v3_s3>;
|
|
};
|
|
|
|
vcc5v0_host: vcc5v0-host-regulator {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vcc5v0_host";
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
enable-active-high;
|
|
gpio = <&gpio4 RK_PB0 GPIO_ACTIVE_HIGH>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&vcc5v0_host_en>;
|
|
vin-supply = <&vcc5v0_sys>;
|
|
};
|
|
|
|
vcc5v0_usb_hub: vcc5v0-usb-hub {
|
|
compatible = "regulator-fixed";
|
|
enable-active-high;
|
|
gpio = <&gpio4 RK_PA6 GPIO_ACTIVE_HIGH>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&vcc5v0_usb_hub_en>;
|
|
regulator-name = "vcc5v0_usb_hub";
|
|
regulator-always-on;
|
|
vin-supply = <&vcc5v0_sys>;
|
|
};
|
|
|
|
vcc5v0_sys: vcc5v0-sys-regulator {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vcc5v0_sys";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
};
|
|
|
|
vcc_1v1_nldo_s3: vcc-1v1-nldo-s3-regulator {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vcc_1v1_nldo_s3";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <1100000>;
|
|
regulator-max-microvolt = <1100000>;
|
|
vin-supply = <&vcc5v0_sys>;
|
|
};
|
|
};
|
|
|
|
&combphy0_ps {
|
|
status = "okay";
|
|
};
|
|
|
|
&combphy1_ps {
|
|
status = "okay";
|
|
};
|
|
|
|
&combphy2_psu {
|
|
status = "okay";
|
|
};
|
|
|
|
&cpu_b0 {
|
|
cpu-supply = <&vdd_cpu_big0_s0>;
|
|
};
|
|
|
|
&cpu_b1 {
|
|
cpu-supply = <&vdd_cpu_big0_s0>;
|
|
};
|
|
|
|
&cpu_b2 {
|
|
cpu-supply = <&vdd_cpu_big1_s0>;
|
|
};
|
|
|
|
&cpu_b3 {
|
|
cpu-supply = <&vdd_cpu_big1_s0>;
|
|
};
|
|
|
|
&cpu_l0 {
|
|
cpu-supply = <&vdd_cpu_lit_s0>;
|
|
};
|
|
|
|
&cpu_l1 {
|
|
cpu-supply = <&vdd_cpu_lit_s0>;
|
|
};
|
|
|
|
&cpu_l2 {
|
|
cpu-supply = <&vdd_cpu_lit_s0>;
|
|
};
|
|
|
|
&cpu_l3 {
|
|
cpu-supply = <&vdd_cpu_lit_s0>;
|
|
};
|
|
|
|
&gmac0 {
|
|
clock_in_out = "output";
|
|
phy-handle = <&rgmii_phy>;
|
|
phy-mode = "rgmii-rxid";
|
|
pinctrl-0 = <&gmac0_miim
|
|
&gmac0_tx_bus2
|
|
&gmac0_rx_bus2
|
|
&gmac0_rgmii_clk
|
|
&gmac0_rgmii_bus>;
|
|
pinctrl-names = "default";
|
|
rx_delay = <0x00>;
|
|
tx_delay = <0x43>;
|
|
status = "okay";
|
|
};
|
|
|
|
&gpu {
|
|
mali-supply = <&vdd_gpu_s0>;
|
|
status = "okay";
|
|
};
|
|
|
|
&hdmi0 {
|
|
status = "okay";
|
|
};
|
|
|
|
|
|
&hdptxphy_hdmi0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&hdmi0_in {
|
|
hdmi0_in_vp0: endpoint {
|
|
remote-endpoint = <&vp0_out_hdmi0>;
|
|
};
|
|
};
|
|
|
|
&hdmi0_out {
|
|
hdmi0_out_con: endpoint {
|
|
remote-endpoint = <&hdmi0_con_in>;
|
|
};
|
|
};
|
|
|
|
&hdmi1 {
|
|
status = "okay";
|
|
};
|
|
|
|
&hdmi1_in {
|
|
hdmi1_in_vp1: endpoint {
|
|
remote-endpoint = <&vp1_out_hdmi1>;
|
|
};
|
|
};
|
|
|
|
&hdmi1_out {
|
|
hdmi1_out_con: endpoint {
|
|
remote-endpoint = <&hdmi1_con_in>;
|
|
};
|
|
};
|
|
|
|
&hdptxphy1 {
|
|
status = "okay";
|
|
};
|
|
|
|
&hdmi_receiver_cma {
|
|
status = "okay";
|
|
};
|
|
|
|
&hdmi_receiver {
|
|
status = "okay";
|
|
hpd-gpios = <&gpio2 RK_PB5 GPIO_ACTIVE_LOW>;
|
|
pinctrl-0 = <&hdmim1_rx_cec &hdmim1_rx_hpdin &hdmim1_rx_scl &hdmim1_rx_sda &hdmirx_hpd>;
|
|
pinctrl-names = "default";
|
|
memory-region = <&hdmi_receiver_cma>;
|
|
};
|
|
|
|
&i2c0 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2c0m2_xfer>;
|
|
status = "okay";
|
|
|
|
vdd_cpu_big0_s0: regulator@42 {
|
|
compatible = "rockchip,rk8602";
|
|
reg = <0x42>;
|
|
fcs,suspend-voltage-selector = <1>;
|
|
regulator-name = "vdd_cpu_big0_s0";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <550000>;
|
|
regulator-max-microvolt = <1050000>;
|
|
regulator-ramp-delay = <2300>;
|
|
vin-supply = <&vcc5v0_sys>;
|
|
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
vdd_cpu_big1_s0: regulator@43 {
|
|
compatible = "rockchip,rk8603", "rockchip,rk8602";
|
|
reg = <0x43>;
|
|
fcs,suspend-voltage-selector = <1>;
|
|
regulator-name = "vdd_cpu_big1_s0";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <550000>;
|
|
regulator-max-microvolt = <1050000>;
|
|
regulator-ramp-delay = <2300>;
|
|
vin-supply = <&vcc5v0_sys>;
|
|
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
};
|
|
|
|
&i2c2 {
|
|
status = "okay";
|
|
|
|
hym8563: rtc@51 {
|
|
compatible = "haoyu,hym8563";
|
|
reg = <0x51>;
|
|
#clock-cells = <0>;
|
|
clock-output-names = "hym8563";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&hym8563_int>;
|
|
interrupt-parent = <&gpio0>;
|
|
interrupts = <RK_PB2 IRQ_TYPE_LEVEL_LOW>;
|
|
wakeup-source;
|
|
};
|
|
};
|
|
|
|
&i2c7 {
|
|
status = "okay";
|
|
|
|
es8388: audio-codec@11 {
|
|
compatible = "everest,es8388";
|
|
reg = <0x11>;
|
|
assigned-clocks = <&cru I2S0_8CH_MCLKOUT>;
|
|
assigned-clock-rates = <12288000>;
|
|
AVDD-supply = <&vcc_3v3_s3>;
|
|
clocks = <&cru I2S0_8CH_MCLKOUT>;
|
|
DVDD-supply = <&vcc_1v8_s3>;
|
|
HPVDD-supply = <&vcc_3v3_s3>;
|
|
PVDD-supply = <&vcc_1v8_s3>;
|
|
#sound-dai-cells = <0>;
|
|
};
|
|
};
|
|
|
|
&i2s0_8ch {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2s0_lrck
|
|
&i2s0_mclk
|
|
&i2s0_sclk
|
|
&i2s0_sdi0
|
|
&i2s0_sdo0>;
|
|
status = "okay";
|
|
};
|
|
|
|
&mdio0 {
|
|
rgmii_phy: ethernet-phy@1 {
|
|
/* RTL8211F */
|
|
compatible = "ethernet-phy-ieee802.3-c22";
|
|
reg = <0x1>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&rtl8211f_rst>;
|
|
reset-assert-us = <20000>;
|
|
reset-deassert-us = <100000>;
|
|
reset-gpios = <&gpio4 RK_PB3 GPIO_ACTIVE_LOW>;
|
|
};
|
|
};
|
|
|
|
&pcie2x1l0 {
|
|
reset-gpios = <&gpio0 RK_PB0 GPIO_ACTIVE_HIGH>;
|
|
status = "okay";
|
|
};
|
|
|
|
&pcie2x1l1 {
|
|
reset-gpios = <&gpio4 RK_PA2 GPIO_ACTIVE_HIGH>;
|
|
status = "okay";
|
|
};
|
|
|
|
&pcie2x1l2 {
|
|
reset-gpios = <&gpio4 RK_PA5 GPIO_ACTIVE_HIGH>;
|
|
status = "okay";
|
|
};
|
|
|
|
&pcie30phy {
|
|
status = "okay";
|
|
};
|
|
|
|
&pcie3x4 {
|
|
pinctrl-names = "default";
|
|
reset-gpios = <&gpio4 RK_PB6 GPIO_ACTIVE_HIGH>;
|
|
vpcie3v3-supply = <&vcc3v3_pcie30>;
|
|
status = "okay";
|
|
};
|
|
|
|
&pinctrl {
|
|
hdmirx {
|
|
hdmirx_hpd: hdmirx-hpd {
|
|
rockchip,pins = <2 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
};
|
|
|
|
hym8563 {
|
|
hym8563_int: hym8563-int {
|
|
rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
};
|
|
|
|
leds {
|
|
led_net_en: led_net_en {
|
|
rockchip,pins = <2 RK_PC3 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
|
|
led_sata_en: led_sata_en {
|
|
rockchip,pins = <2 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
|
|
led_user_en: led_user_en {
|
|
rockchip,pins = <3 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
|
|
led_work_en: led_work_en {
|
|
rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
};
|
|
|
|
modem {
|
|
modem_power_en: modem-power-en {
|
|
rockchip,pins = <4 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
|
|
modem_reset_en: modem-reset-en {
|
|
rockchip,pins = <4 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
};
|
|
|
|
rtl8211f {
|
|
rtl8211f_rst: rtl8211f-rst {
|
|
rockchip,pins = <4 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
};
|
|
|
|
sound {
|
|
hp_detect: hp-detect {
|
|
rockchip,pins = <1 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
};
|
|
|
|
usb {
|
|
vcc5v0_host_en: vcc5v0-host-en {
|
|
rockchip,pins = <4 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
|
|
vcc5v0_usb_hub_en: vcc5v0_usb_hub_en {
|
|
rockchip,pins = <4 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&saradc {
|
|
vref-supply = <&avcc_1v8_s0>;
|
|
status = "okay";
|
|
};
|
|
|
|
&sdhci {
|
|
bus-width = <8>;
|
|
max-frequency = <200000000>;
|
|
mmc-hs400-1_8v;
|
|
mmc-hs400-enhanced-strobe;
|
|
no-sdio;
|
|
no-sd;
|
|
non-removable;
|
|
status = "okay";
|
|
};
|
|
|
|
&sdmmc {
|
|
max-frequency = <150000000>;
|
|
no-sdio;
|
|
no-mmc;
|
|
bus-width = <4>;
|
|
cap-mmc-highspeed;
|
|
cap-sd-highspeed;
|
|
disable-wp;
|
|
sd-uhs-sdr104;
|
|
cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
|
|
vmmc-supply = <&vcc_3v3_s3>;
|
|
vqmmc-supply = <&vccio_sd_s0>;
|
|
status = "okay";
|
|
};
|
|
|
|
&spi2 {
|
|
status = "okay";
|
|
assigned-clocks = <&cru CLK_SPI2>;
|
|
assigned-clock-rates = <200000000>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&spi2m2_cs0 &spi2m2_pins>;
|
|
num-cs = <1>;
|
|
|
|
pmic@0 {
|
|
compatible = "rockchip,rk806";
|
|
spi-max-frequency = <1000000>;
|
|
reg = <0x0>;
|
|
|
|
interrupt-parent = <&gpio0>;
|
|
interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
|
|
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>,
|
|
<&rk806_dvs2_null>, <&rk806_dvs3_null>;
|
|
|
|
system-power-controller;
|
|
|
|
vcc1-supply = <&vcc5v0_sys>;
|
|
vcc2-supply = <&vcc5v0_sys>;
|
|
vcc3-supply = <&vcc5v0_sys>;
|
|
vcc4-supply = <&vcc5v0_sys>;
|
|
vcc5-supply = <&vcc5v0_sys>;
|
|
vcc6-supply = <&vcc5v0_sys>;
|
|
vcc7-supply = <&vcc5v0_sys>;
|
|
vcc8-supply = <&vcc5v0_sys>;
|
|
vcc9-supply = <&vcc5v0_sys>;
|
|
vcc10-supply = <&vcc5v0_sys>;
|
|
vcc11-supply = <&vcc_2v0_pldo_s3>;
|
|
vcc12-supply = <&vcc5v0_sys>;
|
|
vcc13-supply = <&vcc_1v1_nldo_s3>;
|
|
vcc14-supply = <&vcc_1v1_nldo_s3>;
|
|
vcca-supply = <&vcc5v0_sys>;
|
|
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
|
|
rk806_dvs1_null: dvs1-null-pins {
|
|
pins = "gpio_pwrctrl1";
|
|
function = "pin_fun0";
|
|
};
|
|
|
|
rk806_dvs2_null: dvs2-null-pins {
|
|
pins = "gpio_pwrctrl2";
|
|
function = "pin_fun0";
|
|
};
|
|
|
|
rk806_dvs3_null: dvs3-null-pins {
|
|
pins = "gpio_pwrctrl3";
|
|
function = "pin_fun0";
|
|
};
|
|
|
|
regulators {
|
|
vdd_gpu_s0: vdd_gpu_mem_s0: dcdc-reg1 {
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <550000>;
|
|
regulator-max-microvolt = <950000>;
|
|
regulator-ramp-delay = <12500>;
|
|
regulator-name = "vdd_gpu_s0";
|
|
regulator-enable-ramp-delay = <400>;
|
|
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
vdd_cpu_lit_s0: vdd_cpu_lit_mem_s0: dcdc-reg2 {
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <550000>;
|
|
regulator-max-microvolt = <950000>;
|
|
regulator-ramp-delay = <12500>;
|
|
regulator-name = "vdd_cpu_lit_s0";
|
|
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
vdd_log_s0: dcdc-reg3 {
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <675000>;
|
|
regulator-max-microvolt = <750000>;
|
|
regulator-ramp-delay = <12500>;
|
|
regulator-name = "vdd_log_s0";
|
|
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
regulator-suspend-microvolt = <750000>;
|
|
};
|
|
};
|
|
|
|
vdd_vdenc_s0: vdd_vdenc_mem_s0: dcdc-reg4 {
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <550000>;
|
|
regulator-max-microvolt = <950000>;
|
|
regulator-ramp-delay = <12500>;
|
|
regulator-name = "vdd_vdenc_s0";
|
|
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
vdd_ddr_s0: dcdc-reg5 {
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <675000>;
|
|
regulator-max-microvolt = <900000>;
|
|
regulator-ramp-delay = <12500>;
|
|
regulator-name = "vdd_ddr_s0";
|
|
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
regulator-suspend-microvolt = <850000>;
|
|
};
|
|
};
|
|
|
|
vdd2_ddr_s3: dcdc-reg6 {
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-name = "vdd2_ddr_s3";
|
|
|
|
regulator-state-mem {
|
|
regulator-on-in-suspend;
|
|
};
|
|
};
|
|
|
|
vcc_2v0_pldo_s3: dcdc-reg7 {
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <2000000>;
|
|
regulator-max-microvolt = <2000000>;
|
|
regulator-ramp-delay = <12500>;
|
|
regulator-name = "vdd_2v0_pldo_s3";
|
|
|
|
regulator-state-mem {
|
|
regulator-on-in-suspend;
|
|
regulator-suspend-microvolt = <2000000>;
|
|
};
|
|
};
|
|
|
|
vcc_3v3_s3: dcdc-reg8 {
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-name = "vcc_3v3_s3";
|
|
|
|
regulator-state-mem {
|
|
regulator-on-in-suspend;
|
|
regulator-suspend-microvolt = <3300000>;
|
|
};
|
|
};
|
|
|
|
vddq_ddr_s0: dcdc-reg9 {
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-name = "vddq_ddr_s0";
|
|
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
vcc_1v8_s3: dcdc-reg10 {
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-name = "vcc_1v8_s3";
|
|
|
|
regulator-state-mem {
|
|
regulator-on-in-suspend;
|
|
regulator-suspend-microvolt = <1800000>;
|
|
};
|
|
};
|
|
|
|
avcc_1v8_s0: pldo-reg1 {
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-name = "avcc_1v8_s0";
|
|
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
vcc_1v8_s0: pldo-reg2 {
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-name = "vcc_1v8_s0";
|
|
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
regulator-suspend-microvolt = <1800000>;
|
|
};
|
|
};
|
|
|
|
avdd_1v2_s0: pldo-reg3 {
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <1200000>;
|
|
regulator-max-microvolt = <1200000>;
|
|
regulator-name = "avdd_1v2_s0";
|
|
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
vcc_3v3_s0: pldo-reg4 {
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-ramp-delay = <12500>;
|
|
regulator-name = "vcc_3v3_s0";
|
|
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
vccio_sd_s0: pldo-reg5 {
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-ramp-delay = <12500>;
|
|
regulator-name = "vccio_sd_s0";
|
|
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
pldo6_s3: pldo-reg6 {
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-name = "pldo6_s3";
|
|
|
|
regulator-state-mem {
|
|
regulator-on-in-suspend;
|
|
regulator-suspend-microvolt = <1800000>;
|
|
};
|
|
};
|
|
|
|
vdd_0v75_s3: nldo-reg1 {
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <750000>;
|
|
regulator-max-microvolt = <750000>;
|
|
regulator-name = "vdd_0v75_s3";
|
|
|
|
regulator-state-mem {
|
|
regulator-on-in-suspend;
|
|
regulator-suspend-microvolt = <750000>;
|
|
};
|
|
};
|
|
|
|
vdd_ddr_pll_s0: nldo-reg2 {
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <850000>;
|
|
regulator-max-microvolt = <850000>;
|
|
regulator-name = "vdd_ddr_pll_s0";
|
|
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
regulator-suspend-microvolt = <850000>;
|
|
};
|
|
};
|
|
|
|
avdd_0v75_s0: nldo-reg3 {
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <750000>;
|
|
regulator-max-microvolt = <750000>;
|
|
regulator-name = "avdd_0v75_s0";
|
|
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
vdd_0v85_s0: nldo-reg4 {
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <850000>;
|
|
regulator-max-microvolt = <850000>;
|
|
regulator-name = "vdd_0v85_s0";
|
|
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
vdd_0v75_s0: nldo-reg5 {
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <750000>;
|
|
regulator-max-microvolt = <750000>;
|
|
regulator-name = "vdd_0v75_s0";
|
|
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&tsadc {
|
|
status = "okay";
|
|
};
|
|
|
|
&uart2 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&uart2m0_xfer>;
|
|
status = "okay";
|
|
};
|
|
|
|
&u2phy1 {
|
|
status = "okay";
|
|
};
|
|
|
|
&u2phy1_otg {
|
|
phy-supply = <&vcc5v0_host>;
|
|
status = "okay";
|
|
};
|
|
|
|
&u2phy2 {
|
|
status = "okay";
|
|
};
|
|
|
|
&u2phy2_host {
|
|
/* connected to USB hub, which is powered by vcc5v0_sys */
|
|
phy-supply = <&vcc5v0_sys>;
|
|
status = "okay";
|
|
};
|
|
|
|
&u2phy3 {
|
|
status = "okay";
|
|
};
|
|
|
|
&u2phy3_host {
|
|
phy-supply = <&vcc5v0_host>;
|
|
status = "okay";
|
|
};
|
|
|
|
&usbdp_phy1 {
|
|
status = "okay";
|
|
};
|
|
|
|
&usb_host0_ehci {
|
|
status = "okay";
|
|
};
|
|
|
|
&usb_host0_ohci {
|
|
status = "okay";
|
|
};
|
|
|
|
&usb_host1_ehci {
|
|
status = "okay";
|
|
};
|
|
|
|
&usb_host1_ohci {
|
|
status = "okay";
|
|
};
|
|
|
|
&usb_host1_xhci {
|
|
dr_mode = "host";
|
|
status = "okay";
|
|
};
|
|
|
|
&usb_host2_xhci {
|
|
status = "okay";
|
|
};
|
|
|
|
&vop {
|
|
status = "okay";
|
|
};
|
|
|
|
&vop_mmu {
|
|
status = "okay";
|
|
};
|
|
|
|
&vp0 {
|
|
vp0_out_hdmi0: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
|
|
reg = <ROCKCHIP_VOP2_EP_HDMI0>;
|
|
remote-endpoint = <&hdmi0_in_vp0>;
|
|
};
|
|
};
|
|
|
|
&vp1 {
|
|
vp1_out_hdmi1: endpoint@ROCKCHIP_VOP2_EP_HDMI1 {
|
|
reg = <ROCKCHIP_VOP2_EP_HDMI1>;
|
|
remote-endpoint = <&hdmi1_in_vp1>;
|
|
};
|
|
}; |