- Add mainline U-Boot support for edge branch (v2026.01-rc2)
- Add U-Boot defconfig patch for nanopi-r76s
- Fix USB3.0 Type-A host port configuration in DTS
- Enable USB OTG0 controller in host mode with power GPIO control
- Set KERNEL_TEST_TARGET to edge
- using the same DT as the rockchip64-6.16
- defconfig based on Rock5b, so we can eventually use the same fusb302 when time comes
- -u-boot.dtsi enables `ums` / `rockusb` et al using the middle usb-c port (orientation sensitive)
- enables booting from NVMe
- TODO: sd/usb/nvme/mmc boot order
- this maps copying files from dirs in the patch directory directly to the u-boot tree, without any .patch required:
- `defconfig` -> `configs` (useful for all)
- `dt_uboot` -> `arch/arm/dts` (useful for most; use for xx-u-boot.dtsi or stuff without CONFIG_OF_UPSTREAM)
- `dt_upstream_rockchip` -> `dts/upstream/src/arm64/rockchip` (useful for Rockchip boards)
- other mappings (eg `dt_upstream_xxx`) might be added later
* import new layout for libreelec patches (no more mbox)
* refactor existing patches to kernel 6.17
* fix uboot issue causing VOP IOMMU page fault and no screen
* Khadas VIM4: U-Boot: Mod bootargs/defconfig and add bootscr support
Signed-off-by: Patrick Yavitz <pyavitz@gmail.com>
* Khadas VIM4: Pull U-Boot from CoreELEC instead of Khadas
Signed-off-by: Patrick Yavitz <pyavitz@gmail.com>
* Khadas VIM4: Remove setexpr bootargs sub rootfstype= from boot.cmd
This is no longer required
Signed-off-by: Patrick Yavitz <pyavitz@gmail.com>
* Meson S4T7: family.conf: Add missing `mkdir -p "${tbasedir}"`
The toolchains fail to download because the dir isn't created
Signed-off-by: Patrick Yavitz <pyavitz@gmail.com>
* Meson T7: Add rootfstype= to command line
Signed-off-by: Patrick Yavitz <pyavitz@gmail.com>
* Khadas VIM4: Add extra boot arguments
Signed-off-by: Patrick Yavitz <pyavitz@gmail.com>
* Remove `viraniac` as maintainer and add `rw` to cmdline
Signed-off-by: Patrick Yavitz <pyavitz@gmail.com>
* Amlogic T7: Add `fsck.repair=yes` and `rootwait` to cmdline
Signed-off-by: Patrick Yavitz <pyavitz@gmail.com>
* Amlogic T7: Move `${bootargs}` placement
Signed-off-by: Patrick Yavitz <pyavitz@gmail.com>
---------
Signed-off-by: Patrick Yavitz <pyavitz@gmail.com>
Co-authored-by: Igor <igor@armbian.com>
Add board configuration for FriendlyELEC NanoPi R76S, including:
- nanopi-r76s.conf with board parameters and boot settings
- initial kernel / U-Boot patch for device tree and board bring-up
Werner
Igor Velkov
SuperKali
Tom Urlings
Rolf Leggewie
Mecid
EvilOlaf
Ricardo Pardini
Muhammed Efe Cetin
Coia Prant
Austin Lane
Kamil Saigol
retro98boy
Your Name
Jianfeng Liu
Paolo Sabatino
Igor Pecovnik
Patrick Yavitz
c0rnelius
Viacheslav Bocharov