This was required in order to get the wif-pwrseq and bluetooth
functioning correctly on the BPI-M4-Zero. I suspect it will
have no negative results on other units. But of course this
needs to be tested.
Signed-off-by: Patrick Yavitz <pyavitz@gmail.com>
* Add option for number of threads used by build system
Attempt to fix https://github.com/armbian/build/issues/6907
* Add CPUTHREADS to replace USEALLTHREADS
Defaults to 150% as was always the case, otherwise allow user to override number of threads.
* Add initial support for Orangepi 5 Pro
Tested and Working:
Wireless & Bluetooth
USB 2.0 + USB 3.1
HDMI 2.1
Gigabit Ethernet (PCIe to RJ45 - Need drivers YT6801)
NVMe PCIe 2.0
MicroSD
Audio Controller es8388 - Audio Out
FAN PWM
LEDs PWM
Not Working:
Onboard Microphone
HDMI 2.0 (DP-HDMI - rockchip,rk3588-dp No Driver)
Not Tested:
Camera 1,2
eMMC
* OPi 5 Pro: Ethernet Driver Installation on First Boot
Implemented a simple script to install the driver
during first boot using the installation headers
included in the image. Takes just a few seconds
on first boot.
Disclaimer: Attempted installation in a chroot env but failed.
* fix: Make first-boot Ethernet driver install more robust
The `eth-driver-firstboot.service` would sometimes fail on first boot with a "Resource temporarily unavailable" error. This happened when another process had a lock on `dpkg`.
To fix this, the installation script now waits for any `dpkg` locks to be released before attempting to install the driver package. It also includes a retry mechanism (3 attempts) in case of a transient failure.
This ensures the network driver is successfully installed, providing a better out-of-box experience.
- The edge branch will soon move to 6.16, so adding the current branch
now.
- The kernel config is just a copy of edge config since both kernels are
the same right now.
Signed-off-by: Ayush Singh <ayush@beagleboard.org>
* set clocks to the old default rate if the codec never calls set_sysclk
After mainline kernel commit 21cfbeae7d7c54a6cdea4b00096150f438f4fbde
rockchip i2s requires that soc codecs call set_sysclk to explicity select a rate.
This patch simply reverts to the old behavior if the codec does call set_sysclk.
(rather that failing in that case with a bogus rate of 0hz)
Also adds rk3308 vendor ASoC support to 6.16 kernel
* Require use of device tree overlay to enable pcm5102a CODEC
KASLR, or Kernel Address Space Layout Randomization, is a
security mechanism used in operating system kernels to randomize
the memory locations of kernel code and data. This makes it
significantly harder for attackers to exploit memory corruption
vulnerabilities by preventing them from knowing the exact
addresses of kernel components.
Signed-off-by: Patrick Yavitz <pyavitz@gmail.com>
- Enable USB serial by default.
- Allows serial access without needing extra UART cable.
- Also USB serial is much faster than using the UART debug port.
Signed-off-by: Ayush Singh <ayush@beagleboard.org>
Firstly, the upstream patch for sun4i-drm ensures the HDMI output is initialized successfully.
Secondly, patching drm_atomic_helper_connector_hdmi_check() avoids a null pointer dereference at shutdown or reboot
Although my initial testing appeared to be a success, subsequent
testing finds it to fail more often than it works.
Back to square one.
Signed-off-by: Patrick Yavitz <pyavitz@gmail.com>
The old method carried along with board-pbp-add-dp-alt-mode.patch only
makes typec work in one(normal) orientation. This patch introduces a
proper extcon driver and makes the workaround cleaner, so orientation
switch is working.
Improvements:
- type-c DP on rk3399 works with both orientations
- type-c USB 3.0 on rk3399 works with both orientations, with minor
issues, see below
Caveats:
- Powered USB-C hubs may be not recognized, and can be worked around by
loading a gadget driver, or manually toggling the mode once for each
connection.
- Some dual-role devices(phone, tablet) may be not recognized.
Affected boards:
- TinkerBoard 2/2S
- Pinebook Pro
- NanoPC T4
- Orange Pi 4
- Orange Pi 4 LTS
Tested on tinkerboard 2s. This patch contains other minor fixes for
tinker2's device tree, including adding a missing fan node, adding color
labels to leds.
The 2 patches adding dp support for nanopc t4 and pinebook pro are also
updated accordingly.
The device trees of Orange Pi 4 / 4 LTS are also updated to match the
new implementation.
Change U-Boot repository link from git.ti.com to Github. In the past,
there have been CI issues caused due to git.ti.com failing.
Signed-off-by: Suhaas Joshi <s-joshi@ti.com>
Texas Instruments maintains a custom apt repository [0] that contains:
* tools like k3conf, which run on K3 devices
* TI's versions of upstream packages (such as mesa)
* out-of-tree drivers and firmware for graphics, wifi etc
Therefore, add TI's custom repository as the highest priority repository
in the filesystem. Doing this ensures that if apt finds a version of a
package that exists in both upstream Debian and the TI repository, it
picks the latter.
Additionally, introduce K3_PACKAGES variable to store a list of packages
that should be installed by-default in a K3 image. Initialize it to hold
TI's CC33xx packages.
Also set EXTRAWIFI to "no" in `current` image.
[0] https://github.com/TexasInstruments/ti-debpkgs
Co-authored-by: Suhaas Joshi <s-joshi@ti.com>
Signed-off-by: Suhaas Joshi <s-joshi@ti.com>
Patrick Yavitz
Igor Pecovnik
Andrei Aldea
Jianfeng Liu
Khusika Dhamar Gusti
c127
d93921012
TheSnowfield
Ayush Singh
Rolf Leggewie
dependabot[bot]
brentr
veduco
igorpecovnik
Werner
Ryan L
hyx0329
Mecid Urganci
Suhaas Joshi
Andrei Aldea
Werner