Change from "y" to "m"
Before
[ 2.423992] rtc-hym8563 1-0051: no valid clock/calendar values available
[ 2.424718] rtc-hym8563 1-0051: registered as rtc0
[ 2.425770] rtc-hym8563 1-0051: no valid clock/calendar values available
[ 2.425789] rtc-hym8563 1-0051: hctosys: unable to read the hardware clock
[ 3.817166] rk808-rtc rk808-rtc.5.auto: registered as rtc1
After
[ 3.790107] rk808-rtc rk808-rtc.5.auto: registered as rtc0
[ 3.801742] rk808-rtc rk808-rtc.5.auto: setting system clock to 2017-08-05T09:48:13 UTC (1501926493)
[ 3.919628] rtc-hym8563 1-0051: registered as rtc1
Signed-off-by: Patrick Yavitz <pyavitz@gmail.com>
Enables kernel options that are important for making armbian viable for use on PocketBeagle 2.
Can now run all examples present in the beagle examples repo: https://github.com/beagleboard/vsx-examples
Signed-off-by: Ayush Singh <ayush@beagleboard.org> Andrei Aldea <andrei@beagleboard.org>
* always use http for apt repos
* pass possible proxy arguments to docker
* populate lower-case env variables with upper-case ones if not set otherwise
* correct system patch used for aliasing on Allwinner A10, A13 and A20 to ensure consistent allocation of device IDs
* Re-introduce spi overlays for each bus so that when used in conjuction with a device driver overlay, the pins are correctly muxed into SPI mode
* Ensure SPI overlay patches are applied
* Fix typo in patch name
* Move alias patches further down series.conf to ensure they are only called after the intial overlay creation
* Rephrase subject heading to improve clarity
* Fix interface aliases on Allwinner A10 for I2C, SPI and UART
* Fix interface aliases on Allwinner A13 for I2C and UART
* Fix interface aliases on Allwinner A20 for I2C, SPI and UART
* Fix SPI 2 pin names in line with latest revision of the Allwinner A10 device tree
* Fix SPI 2 pin names in line with latest revision of the Allwinner A20 device tree
* Create overlays for each bus on the Allwinner A20 so that the corresponding pins can be set into spi mode
* Create overlays for each bus on the Allwinner A10 so that the corresponding pins can be set into spi mode
* Condense alias path corrections into the intial overlay creation patch instead of applying a further patch on topof it to enact these corrections
* Remove references to our no longer needed addtional overlays
* rename to include 'arm-dts..' for consistency with other dts related patches
* Fix mistake in SPI overlay patches naming which leads to build failure
* Fix typo in application of spi2 overlay that was leading to compilation failure
* Amend the assigned aliases in overlay creation so that the kernel correctly maps the bus/port number to match the physical hardware numbering
* Update pin labels for SPI 2 to use current names as defined in sun4i-a10.dtsi and sun7i-a20.dtsi. fixed typo in sun5i-a13-spi-spidev as compatibility field should be sun5i-a13
* Re-introduce compilation of spi bus overlays on Allwinner A10 and A20 SOCs which are necessary to ensure that the pins are correctly muxed into spi mode
- fixes: unrecognized option '-Wl,--no-warn-rwx-segment'
- add a patch to atf that removes the unrecognized linker options
Signed-off-by: Martin Schmiedel <Martin.Schmiedel@tq-group.com>
Follow conventional `if-then-else-fi` constructions by not having `else` followed by semicolon. Hush is accepting, but other commonly used shells do not accept this.
- UUID boot does not seem to work on PocketBeagle 2.
- So specify the block device path instead.
- Also without rootwait, the boot will fail.
Signed-off-by: Ayush Singh <ayush@beagleboard.org>
coderabbitai[bot]
Igor Pecovnik
retro98boy
CaWeissWz
Werner
dependabot[bot]
Patrick Yavitz
igorpecovnik
Your Name
Ayush
Jack Huang
Ryzer58
The-going
Martin Schmiedel
djurny
Andy Yan