Commit Graph

5575 Commits

Author SHA1 Message Date
amazingfate d2c7cf7fec rockchip64-6.14: slow down emmc freq instead of toggling to HS200 for rock5b 2025-03-09 10:48:15 +01:00
amazingfate e30786930e rockchip64-6.12: slow down emmc freq instead of toggling to HS200 for rock5b 2025-03-09 10:48:15 +01:00
Julian Sikorski 2b8a418a54 Update odroidxu4-current to 6.6.81 2025-03-09 10:47:53 +01:00
Paolo Sabatino fad71e1962 fix stable mac address for rk3318-box 2025-03-09 09:31:23 +01:00
SuperKali 93e5224a9a
rockchip64-6.14: rewrite rock5 hdmi audio patch (#7929) 2025-03-09 08:23:12 +01:00
Werner fe49bf5e94
RESEND - Add initial support for Orangepi 5 Ultra (#7902)
* Create rk3588-orangepi-5-ultra.dts

* Create orangepi5-ultra.csc

* fixups

* add notes

* fix u-boot compilation

* Update to v7 patch series

https://patchwork.kernel.org/project/linux-arm-kernel/cover/20250222193332.1761-1-honyuenkwun@gmail.com/

* Update rk3588-orangepi-5-ultra.dts

While I don't fully understand either the `kernel-dtb` command nor the dt syntax itself for some reason the `nophandles` version stripped more than actually phandles. Lets see what happens this way.

* Delete patch/kernel/integrate-6.15/0001-tools-Makefile-remove-pci-target.patch

* disable OPTEE

c81f89ca90
2025-03-08 20:10:34 +01:00
Aleksey Komarov bf9ffa6eed Enable HDMI audio outputs for Rock 5B by detlev.casanova@collabora.com
https://lore.kernel.org/all/20250217215641.372723-4-detlev.casanova@collabora.com/
2025-03-08 19:43:05 +01:00
Lane Jennison f78b0ae4d5 rk3568: removed phy patch that was merged in 6.6.81 2025-03-08 19:42:32 +01:00
Lane Jennison 45621aae33 rk3568: removed phy patch that was merged in 6.12.18 2025-03-08 19:42:32 +01:00
SuperKali a691fe095b
rockchip64-6.14: Set dma mask to 64 bit (#7924) 2025-03-08 14:14:46 +01:00
Nicolas Pereira 0b124433ca
rockchip64-edge: add support for yy3568 2025-03-07 19:33:58 +01:00
Paolo Sabatino 534ff27e35 rockchip/64: bump rk322x-box and rk3318-box to u-boot v2025.01 2025-03-03 12:56:25 +01:00
Patrick Yavitz 12c2ff9c9a Add reset and power down support for both ODROID SM1 units
Signed-off-by: Patrick Yavitz <pyavitz@gmail.com>
2025-03-03 12:56:11 +01:00
amazingfate d16287bd60 rockchip64-6.14: add dt overlay of lcd panel on hinlink-h88k 2025-03-03 12:56:02 +01:00
amazingfate d6400cc883 rockchip64-6.12: add dt overlay of lcd panel on hinlink-h88k 2025-03-03 12:56:02 +01:00
JohnTheCoolingFan 7647e5ca5d Remove bigtreetech cb2 device tree in 6.14 as it is now mainlined 2025-02-28 14:07:45 +03:00
JohnTheCoolingFan ea7f004191 Change BigTreeTech CB2 device tree 2025-02-28 14:07:45 +03:00
Paolo Sabatino 5ad769c82e rockchip64: disable DMC for OrangePi 4 LTS, fixes boot with BTF 2025-02-28 08:20:14 +01:00
Paolo Sabatino d6d5bc19cb bump orangepi4 LTS u-boot to v2024.10 2025-02-28 08:20:14 +01:00
palachzzz 0b88561ec3
RK3588 add HDMI sound, add support for OPi5 Max #7884 2025-02-27 23:06:51 +08:00
The-going 96e1ca9e50 sunxi-6.12: Add sun50i-h618-bananapi-m4-berry support 2025-02-26 20:14:19 +01:00
The-going 7c4ccde0bf sunxi-6.12: Add GPU power domain for h616 2025-02-26 20:14:19 +01:00
Stephen Graf b43219e9ac sunxi-6.12: tcon (timing controller), enable HDMI for H616/H618 SOC
Signed-off-by: The-going <48602507+The-going@users.noreply.github.com>
2025-02-26 20:14:19 +01:00
The-going ca483bc22b sunxi-6.12: re-export armbian patches 2025-02-26 20:14:19 +01:00
The-going 7dad76f727 sunxi-6.12: Switching to v6.12.16. Re-export megous patches 2025-02-26 20:14:19 +01:00
The-going 55c805ce9e sunxi-6.12: Switch to v6.12.13
Delete pre-applied ones and re-export patches.
2025-02-26 20:14:19 +01:00
The-going 781550decf sunxi-6.12: drm: sun4i: add sun50i-h616-hdmi-phy support 2025-02-26 20:14:19 +01:00
The-going 5df50eaa8c sunxi-6.12: arm64: dts: Add axp313a.dtsi 2025-02-26 20:14:19 +01:00
The-going 8ca21888da sunxi-6.12: Add drm sun4i-de33 driver
Also disable some megous patches and TV  Output on
OrangePi-Zero-LTE patch
2025-02-26 20:14:19 +01:00
The-going 8fb97d6cd2 sunxi-6.12: sun50i-h616 & overlays: sort nodes, add more 2025-02-26 20:14:19 +01:00
The-going d5d31302a3 sunxi-6.12: reexport all patches to v6.12.12 2025-02-26 20:14:19 +01:00
amazingfate 4714b1610a rockchip64-6.14: add patch to fix rk3588 multi hdmi pll clk 2025-02-26 21:40:01 +08:00
amazingfate 4247d8d8fa rockchip64-edge: add hdmi1 support to rock5 itx 2025-02-26 21:40:01 +08:00
amazingfate 8a725ab092 rockchip64-edge: add hdmi1 disp modes support to rk3588 2025-02-26 21:40:01 +08:00
amazingfate 328cd82221 rockchip64-edge: bump to 6.14 2025-02-26 21:40:01 +08:00
qbisi 2c605989ef hinlink-h88k: revert second hdmi output support for 6.12 kernel
second hdmi output is only supported in 6.13 and above
2025-02-25 18:41:59 +01:00
qbisi e096f33d5c hinlink-h88k: add second hdmi output support 2025-02-25 09:19:33 +08:00
qbisi ef72bd1a8b hinlink-h88k: add missing hdmi0-con port 2025-02-25 09:19:33 +08:00
qbisi bf5ed6c79f hinlink-h88k: fix headphones jack det gpio 2025-02-25 09:19:33 +08:00
qbisi 7303bac5fd hinlink-h88k: sync dts from 6.12 to 6.13 2025-02-25 09:19:33 +08:00
Werner 1033729455
arm64: dts: rockchip: fix gpio-line-names to radxa-rock-3a (#7874)
* rock-3a - fix formatting of gpio-line-names

properly format gpio-line-names, following the example from Trevor Woerner for his contribution to the radxa-zero-3 dt.

Also fix a wrong pin number

* fix applying
2025-02-24 09:21:41 +01:00
Paolo Sabatino 86691d17e4 rockchip/64: fix again periodic dma and audio stuttering 2025-02-23 19:26:53 +01:00
retro98boy d19444bf8a rockchip64: fix wrong GPIO direction in DP virtual extcon driver
The extcon-usbc-virtual-pd driver requests the detection GPIO with the flag GPIOD_OUT_LOW, which leads to a failure in gpiod_to_irq and consequently causes the driver loading to fail.

This issue can be fixed by changing GPIOD_OUT_LOW to either GPIOD_IN or GPIOD_ASIS.

This patch opts to change GPIOD_OUT_LOW to GPIOD_ASIS, as this is a less invasive approach. For devices intending to use this driver, it's also necessary to set the pinctrl property of the detection GPIO to input mode in the dts file.
2025-02-23 19:26:27 +01:00
Patrick Yavitz a0bc90c360 BananaPi BPI-F3: `Alphabetize DTS`
Signed-off-by: Patrick Yavitz <pyavitz@gmail.com>
2025-02-23 19:22:53 +01:00
The-going ecfde0c3d7 sunxi-6.6: Add i2c3_pa, all pwm pins 2025-02-23 09:56:20 +01:00
The-going ddaccc6bac sunxi-6.6: Add BananaPi M4 Berry support 2025-02-23 09:56:20 +01:00
The-going d25a12e782 u-boot: v2025.01: Add bananapi-m4-berry support 2025-02-23 09:56:20 +01:00
TheSnowfield bc69b1d3eb sakurapi-rk3308b: bump dts and vop patches to kernel 6.13 2025-02-23 09:55:48 +01:00
TheSnowfield 91e25e2c01 sakurapi-rk3308b: enable vop and display output 2025-02-23 09:55:48 +01:00
TheSnowfield 9af5f61214 rockchip64: rk3308: add vop and internal rgb lcdc output support 2025-02-23 09:55:48 +01:00
Igor Pecovnik 7184c5aa89 SM8250: drop upstreamed patch as it breaks compilation 2025-02-21 20:19:26 +01:00
chainsx 872a554c69 station-m2: use mainline devicetree name 2025-02-21 19:11:17 +01:00
Ricardo Pardini 89a16b82f5 odroidm1: u-boot: enable `setexpr`; patch 2025.01 for `fileenv`; enable squashfs support
- as Armbian u-boot is possibly deployed to SPI (replacing Petitboot),
  try to make as compatible as possible; eg enable squashfs support
- in this case, `setexpr` and `fileenv` are used by HAOS
  - found `fileenv` here 049e1a1949

Signed-off-by: Ricardo Pardini <ricardo@pardini.net>
2025-02-20 07:00:43 +01:00
qbisi 3cdf696769 fix panel-dsi-simple driver for kernel 6.6, 6.9, 6.12 and 6.13 2025-02-20 07:00:13 +01:00
qbisi cda1089d61 fix ssv6051 driver for kernel 6.6, 6.9, 6.12 and 6.13 2025-02-20 07:00:13 +01:00
qbisi 947f901d24 hinlink-h88k: add hdmi_rx support 2025-02-20 06:59:18 +01:00
qbisi 805e053194 hinlink-h88k: fix mmc speed and det pin 2025-02-20 06:59:18 +01:00
Werner 475e28056b
Orangepi 5 MAX - add support for `current` (#7842)
* add `current` target

* Add Orangepi 5 max device tree to `current` dt
2025-02-19 13:04:17 +01:00
Paolo Sabatino e2f1c44434 rockchip64: fix rocks0 patch breaking current compilation 2025-02-17 21:40:11 +01:00
Muhammed Efe Cetin 8e825e7f9d rockchip64-6.12: add spi flash overlay for NanoPi M6 2025-02-16 23:02:37 +01:00
Muhammed Efe Cetin 3a1b8b4553 rockchip64-6.13: add spi flash overlay for NanoPi M6 2025-02-16 23:02:37 +01:00
Patrick Yavitz c63595015f BananaPi BPI-F3: `Update overlay patch and add overlays`
General overlay comp patch was pulled from Meson64 6.6.y branch

Signed-off-by: Patrick Yavitz <pyavitz@gmail.com>
2025-02-16 13:04:47 -05:00
Patrick Yavitz 6846897178 BananaPi BPI-F3: `add overlay support`
Signed-off-by: Patrick Yavitz <pyavitz@gmail.com>
2025-02-16 13:04:47 -05:00
Patrick Yavitz 2fefa024c2 BananaPi BPI-F3: `Add spacemit k1x-spi support`
Signed-off-by: Patrick Yavitz <pyavitz@gmail.com>
2025-02-16 13:04:47 -05:00
Patrick Yavitz 27d154980b BananaPi BPI-F3: `Add pwm7 and spi3 nodes`
Also alphabetize DTS

Signed-off-by: Patrick Yavitz <pyavitz@gmail.com>
2025-02-16 13:04:47 -05:00
Patrick Yavitz f6256b8715 BananaPi BPI-F3: `Update u-boot k1-x.env file`
Signed-off-by: Patrick Yavitz <pyavitz@gmail.com>
2025-02-16 13:04:47 -05:00
Paolo Sabatino 1f69720656 rockchip64: remove patch to fix rockpi-e gigabit eth 2025-02-12 19:31:35 +01:00
Igor Pecovnik 3637f07183 Revert "imx6: move current to 6.12.y"
This reverts commit a3dac432fc.

USB patch for 6.12.y needs rework - its a bit more work as code has been moved around kernel tree. TBD after 25.2 release.
2025-02-12 11:50:10 +01:00
amazingfate 65faeba83e Revert "fxblox-rk1: add missing patch for latest radxa uboot"
This reverts commit 6ecc0b7e22.
2025-02-11 17:16:36 +01:00
amazingfate 6ecc0b7e22 fxblox-rk1: add missing patch for latest radxa uboot 2025-02-11 07:45:09 +01:00
amazingfate 06852a04a5 retro-lite-cm5: fix for latest radxa uboot 2025-02-11 07:45:09 +01:00
amazingfate d9b7000ea5 armsom-sige5: add pd negotiation support to uboot 2025-02-10 20:18:21 +01:00
amazingfate 83e5675fb4 rk3576: remove unnecessary BL32 from uboot 2025-02-10 20:18:21 +01:00
amazingfate c81f89ca90 u-boot-radxa-rk35xx: disable optee
Follow change from radxa 738cda44532c324e07296c95751e3083fa95f282.

Change with command:
sed -i "/CONFIG_OPTEE/d" patch/u-boot/legacy/u-boot-radxa-rk35xx/defconfig/*
2025-02-10 20:18:21 +01:00
amazingfate 5402492796 merge u-boot-armsom-rk3576 to u-boot-radxa-rk35xx 2025-02-10 20:18:21 +01:00
Martin Schmiedel 9f8f9f51ba IMX8: update patches to fix upstream changes
- while at it rewrite-uboot-patches

Signed-off-by: Martin Schmiedel <Martin.Schmiedel@tq-group.com>
2025-02-10 20:16:48 +01:00
Paolo Sabatino c739c2589f rockchip64: disable pl330 patch due to pulseaudio issues 2025-02-10 09:28:55 +01:00
Igor Pecovnik af131c02cd Meson: drop (long) broken legacy code which is also breaking CI 2025-02-10 08:10:04 +01:00
qbisi cb6f2fbef8 hinlink-h88k: add 5g modem enable and reset pin 2025-02-09 18:50:05 +08:00
qbisi c3be0a4216 hinlink-h88k: fix usb dr_mode to host 2025-02-09 18:50:05 +08:00
Arend-Jan van Hilten 2f1fa5f40f
Fix orangepi 3b audio jack download 'button' (#7794) 2025-02-08 23:11:35 +01:00
Dominik Wójt 5b29f4dd4b
meson: kernel update: legacy -> 6.6, current -> 6.12 (#7801)
* Add MXQ target. Copy HDMI fix from odroid-c1.
* meson8, MXQ: add boot from usb support, configurable dtb
* MXQ: remove boot logo
Built-in U-BOOT is used, so the logo will not be displayed anyway.
* meson: kernel update: legacy -> 6.6, current -> 6.12
* Change Odroid C1 and Onecloud to community supported as build now passes
---------
Co-authored-by: Igor Pecovnik <igor@armbian.com>
2025-02-08 23:08:34 +01:00
Dominik Wójt 2bf71e2fda Add MXQ target. Copy HDMI fix from odroid-c1. 2025-02-08 23:06:01 +01:00
Julian Sikorski 222c875761 Update odroidxu4-current to 6.6.75 2025-02-08 19:38:57 +01:00
Igor Pecovnik 2087a8b012 Revert commit that breaks compilation
This needs deeper anlysis and testing, so lets revert to known situation
2025-02-08 19:38:13 +01:00
Patrick Yavitz ca333b28c1 Amper Gateway AM-GZ80x: `Delete old u-boot patches`
Signed-off-by: Patrick Yavitz <pyavitz@gmail.com>
2025-02-06 11:36:34 -05:00
Patrick Yavitz 68e822d132 Amper Gateway AM-GZ80x: `Update u-boot to v2025.01`
Signed-off-by: Patrick Yavitz <pyavitz@gmail.com>
2025-02-06 11:36:34 -05:00
Patrick Yavitz e54bcc45be BananaPi CM4/M2S: `Delete old u-boot patches`
Signed-off-by: Patrick Yavitz <pyavitz@gmail.com>
2025-02-06 09:06:19 -05:00
Patrick Yavitz a835a5206c BananaPi CM4/M2S: `Update u-boot to v2025.01`
Signed-off-by: Patrick Yavitz <pyavitz@gmail.com>
2025-02-06 09:06:19 -05:00
Igor Pecovnik a3dac432fc imx6: move current to 6.12.y
Tested with Udoo: https://paste.next.armbian.com/ojixapowaq
2025-02-05 19:44:33 +01:00
Paolo Sabatino 448418b9f3 rockchip/64: improvements to pl330 dma driver 2025-02-05 13:45:48 +01:00
EvilOlaf acea78f5dc nanopi-r3s: bump `edge` u-boot to 2025.01
add support for `current`
2025-02-03 16:18:19 +01:00
Thorsten Maerz 6ade04d540 add devicetree for "edge" kernels 2025-02-03 16:17:54 +01:00
Thorsten Maerz 0681dd2a0f change blue/user LED trigger from 'mmc1' to 'activity'
(mmc1 did not show any activity)
2025-02-03 16:17:54 +01:00
Thorsten Maerz fa1168cc96 rename LEDs to reflect their actual colour 2025-02-03 16:17:54 +01:00
Thorsten Maerz 4fdeca5aab add overlay to enable v4l2 devices
Overlay for testing purposes:
Maybe it is possible to use hardware video-encoding on that chip.
2025-02-03 16:17:54 +01:00
Thorsten Maerz ef8349799f disable unusable v4l2 devices
Removes /dev/video[012] and /dev/media[01]
2025-02-03 16:17:54 +01:00
Thorsten Maerz e636bcf00e add overlay for enabling "end1" network adapter
Overlay for testing purposes:
There is a strange interaction between that ethernet adapter and the rtc
(it runs better -but still not well- with the ethernet adapter enabled).
2025-02-03 16:17:54 +01:00
Thorsten Maerz 12ce53a434 disable unusable "end1" network device
There are no physical ethernet ports on that board.
2025-02-03 16:17:54 +01:00
Thorsten Maerz 8f2a468eb9 Add new board: MKSKLIPAD50 (based on MKSPI)
Contains rewritten dts, based on decompiled dtb from original Klipad50
(as similiar as possible to original).
Kernel defconfig taken from MKSPI (replaced "mkspi" with "mksklipad50")
2025-02-03 16:17:54 +01:00