mirror of https://github.com/armbian/build.git
34 Commits
| Author | SHA1 | Message | Date |
|---|---|---|---|
Gunjan Gupta
|
8278dc5e42 | allwinner: Enable crust compilation | |
Ricardo Pardini
|
e49d91ec40 |
popular demand: bring back `KERNEL_CONFIGURE=yes` *during image build*
- partially revert |
|
|
Ricardo Pardini
|
d890b418c7 |
`kernel`/`uboot`/`atf`: introduce `kernel-patch`, `uboot-patch`, `atf-patch`, `uboot-config`, `kernel-config` CLI commands; enhanced manual patching; block deprecated ways
- all interactive commands now **don't build the artifact** anymore; just patches/.configs are produced and then build ends - user is required to put the produced patches in the right place and build again, for full consistency - split ATF and U-BOOT manual patching process; use CLI command `atf-patch` to patch ATF, and `uboot-patch` to patch u-boot - non-interactive artifact builds are now 100% sans-stdin - introduce `uboot-config` CLI command; still experimental, only produces a defconfig and not a patch - reworked `userpatch_create()` to be (hopefully) more useful: - detects a previous patch and offers to apply it before continuing - enters a loop showing the diff, and only proceeds when user indicates he's happy with the patch - produces `mbox`-formatted patches via `format-patch` and standard Armbian parameters - uses MAINTAINER and MAINTAINERMAIL instead of git configuration (so it works in containers) - don't allow image builds with any patching or configuring _at all_ (it has been deprecated with a warning for months already, and results are inconsistent) |
|
|
Ricardo Pardini
|
4e6fd3a507 | warn about KERNEL_CONFIGURE=yes being deprecated during image build; instructions on how to do it properly | |
|
Ricardo Pardini
|
6b965c605c | completely remove any traces of `KERNEL_ONLY` and exit with error if set | |
Igor Pečovnik
|
b7b8eb7b72
|
Add / modify (c) in bash scripts (#4922)
* Add / modify (c) in bash scripts Signed-off-by: Igor <igor@armbian.com> * Add (c) to the source config files --------- Signed-off-by: Igor <igor@armbian.com> |
|
|
Ricardo Pardini
|
a011de8476
|
armbian-next: move aggregation-had-run check to more strategic places (pre-bsp, pre-rootfs) instead of at the beginning of full_build_packages_rootfs_and_image() | |
|
Ricardo Pardini
|
16eb5eb50b
|
armbian-next: aggregate_packages out of `main_default_start_build()`; introduce `assert_requires_aggregation()` | |
|
Ricardo Pardini
|
28d89e2c91
|
armbian-next: `rootfs`: new CLI command for rootfs cache building; further refactorings
- _told ya it would all make sense eventually..._ - introduce new, real, non-alias `rootfs` command in `cli-rootfs` -- this _only_ builds rootfs, nothing else - no more `main_default_build_single()`; instead `full_build_packages_rootfs_and_image()` - introduce `do_with_default_build()` wrapper, for things that need host prepared + aggregation to run - CLI-specific parts of `main_default_build_single()` moved to cli-build - put prepare/cleanup pair of `prepare_rootfs_build_params_and_trap()` and `trap_handler_cleanup_rootfs_and_image()` into new `trap-rootfs.sh` (this needs further splitting for the image part) - refactor `get_or_create_rootfs_cache_chroot_sdcard()` into `build_rootfs_only()`, `calculate_rootfs_cache_id()` - update library with new files |
|
|
Ricardo Pardini
|
2d30a44831
|
armbian-next: `main`: split `default-build` into `build-packages`, `start-end`
- bear with me, this will make sense in the end |
|
|
Ricardo Pardini
|
72c61f2f68
|
armbian-next: replace bare `sync` invocations by introducing `wait_for_disk_sync()`; sync early at start of build
- wait 10s for sync call; otherwise warn user to be patient - wait_for_sync "reason for sync" everywhere - add @TODO for /run/user/0 etc and XDG_RUNTIME_DIR in chroot |
|
|
Ricardo Pardini
|
ce47db1e0a
|
armbian-next: add logging with size of actual built rootfs in MiB; debug tmpfs in trap & after pkgs done | |
|
Ricardo Pardini
|
35fbb7ed6c
|
armbian-next: small cleanups: squash typos / add function keyword / add types / mark dead code | |
|
Ricardo Pardini
|
2455c55dac
|
armbian-next: firmware: don't build `-full` firmware if not on CI/noninteractive and board's not going to use it
- move `fakeroot_dpkg_deb_build()` from runners.sh to new utils-dpkgdeb.sh - and make it debug show the size of the source - clean off `.git` directory earlier for full build - @TODO: get rid of the "hardlinks" funky biz in there and not-copy `.git` to begin with |
|
|
Ricardo Pardini
|
bf891d54d9
|
armbian-next: split `prepare_host()`, fix `.tmp` reset trap
- `prepare_host()`: split; do checks earlier and allow them to be interactive - introduce `exit_if_countdown_not_aborted()` for "Low Disk Space" and other critical conditions - split `prepare_host()` into interactive & non-interactive parts - split off `clean_deprecated_mountpoints()` from prepare into `cleaning.sh` - introduce and use `reset_uid_owner_non_recursive()` for `.tmp` reset in trap, to avoid disasters - add more logging sections to default-build.sh, avoid unlogged parts |
|
|
Ricardo Pardini
|
2d9f9216eb
|
armbian-next: introduce `tmpfs-utils.sh`; put `LOGDIR` and `WORKDIR` under tmpfs; set `CCACHE_TEMPDIR` under `WORKDIR`
- introduce generic `prepare_tmpfs_for()`, which manages it's own cleanup/dir removal - use it for `WORKDIR` (which is `TMPDIR`) and `LOGDIR` - adapt previous cleanup handlers for those, so they delete their contents but not the dir itself (which might be mounted) - also: make `ARMBIAN_LOG_CLI_ID` readonly together with other superglobals - set `XDG_RUNTIME_DIR` & `XDG_RUNTIME_DIR` together with `TMPDIR` - kernel-make.sh: pass `CCACHE_TEMPDIR` down to Kernel make (thanks @the-Going) |
|
|
Ricardo Pardini
|
1075f1b962
|
armbian-next: make sure temporary `kernel` and `u-boot` CLI commands always build a kernel/u-boot even if cached
- really, it's time to split off those into actual, proper CLIs - remove a forgotten `KDEB_CHANGELOG_DIST` left there |
|
|
Ricardo Pardini
|
62bc394738
|
armbian-oleg: curb logging from building `armbian-plymouth-theme`; do it in a logging section, like the others | |
|
Ricardo Pardini
|
d152574ea8
|
armbian-next: move aggregation to after prepare_host(), and thus out of config, and with correct Python deps | |
|
Ricardo Pardini
|
6797016cfb
|
armbian-next: move compilation vars (chtreads, ccache stuff) from config to compile | |
|
Ricardo Pardini
|
76e276c6a9
|
armbian-next: Python patching delusion, pt1 & pt2 & pt3
- WiP: Python patching delusion, pt 1: finding & parsing patches; apply & git commit with pygit2; Markdown summaries (also for aggregation); git-to-patches tool
- Python: Markdown aggregation and patching summaries; collapsible; SummarizedMarkdownWriter
- Python: Markdown aggregation and patching summaries
- Python: reorg a bit into common/armbian_utils; define the `ASSET_LOG_BASE` in preparation for Markdown delusion
- Python patching: initial apply patches & initial commit patches to git (using pygit2)
- Python patching: add basic `series.conf` support
- Python patching: force use of utf-8; better error handling; use realpath of dirs
- Python patching: `git-to-patches` initial hack. not proud. half-reused some of the patches-to-git
- Python patching: "tag" the git commits with info for extracting later; introduce REWRITE_PATCHES/rewrite_patches_in_place
- Python patching: commented-out, recover-bad-patches hacks
- Python patching: shorten the signature
- Python patching: allow BASE_GIT_TAG as well as BASE_GIT_REVISION
- Python patching: git-archeology for patches missing descriptions; avoid UTF-8 in header/desc (not diff)
- Python patching: use modern-er email.utils.parsedate_to_datetime to parse commit date
- Python patching: unify PatchInPatchFile; better git-commiting; re-exporting patches from Git (directly)
- Python patching: switch to GitPython
- GitPython is like 100x slower than pygit2, but actually allows for date & committer
- also allows to remove untracked files before starting
- Python aggregation: fix missing `AGGREGATED_APT_SOURCES_DICT`
- Python patching: add `unidecode` dependency to pip3 install
- Python patching: don't try archeology if SRC is not a Git Repo (eg, in Docker)
- Python patching: don't try archeology if not applying patches to git
- WiP: Python patching delusion, pt2: actually use for u-boot & kernel patching
- Python patching: much better problem handling/logging; lenient with recreations (kernel)
- Python patching: don't force SHOW_LOG for u-boot patching
- Python patching: don't bomb for no reason when there are no patches to apply
- Python patching: fully (?) switch kernel patching to Python
- Python patching: more logging fixups
- Python patching: capture `kernel_git_revision` from `fetch_from_repo()`'s `checked_out_revision`
- Python patching: fully switch u-boot patching to Python
- Python aggregation/patching: colored logging; patching: always reset to git revision
- Python aggregation/patching: better logging; introduce u-boot Python patching
- Python patching pt3: recovers and better Markdown
- Python patching: detect, and rescue, `wrong_strip_level` problem; don't try to export patches that didn't apply, bitch instead
- Python patching: Markdown patching summary table, complete with emoji
- Python patching: include the problem breakdown in Markdown summary
- Python patching: sanity check against half-bare, half-mbox patches
- Python patching: try to recover from 1) bad utf-8 encoded patches; 2) bad unidiff patches; add a few sanity checks
- Python patching: try, and fail, to apply badly utf-8 encoded patches directly as bytes [reverted]
- Python patching: try to recover from patch *parse* failures; show summary; better logging
- set `GIT_ARCHEOLOGY=yes` to do archeology, default not
- armbian-next: Python `pip` dependencies handling, similar to `hostdeps`
- same scheme for Dockerfile caching
- @TODO: still using global/shared environment; should move to a dir under `cache` or some kinda venv
- WiP: add `python3-pip` to hostdeps; remove `python-setuptools`
- remove `python-setuptools` (Python2, no longer exists in Sid) from hostdeps
- add `python3-pip` to hostdeps; part of virtualenv saga
- WiP: split `kernel.sh` a bit, into `kernel-patching.sh`, `kernel-config.sh` and `kernel-make.sh`
- `advanced_patch()`: rename vars for clarity; no real changes
- Python patching: introduce FAST_ARCHEOLOGY; still trying for Markdown links
|
|
|
Ricardo Pardini
|
c251073b78
|
armbian-next: introduce internal base tmp dir; check it early for sanity ref `noexec` and `nodev` mount options | |
|
Ricardo Pardini
|
b386e4615e
|
armbian-next: introduce `INSTALL_HOST_TOOLS=no` to skip rkbin, fips, etc. for fast(er) development | |
|
Ricardo Pardini
|
074857ede3
|
armbian-next: u-boot: use `git worktree` for u-boot; full mainline clone for bare
- share a single `.git` for all u-boots - all fetches are done against it, maximizing cache hit ratio drastically - also reduces the size of each working copy by more than 70% - split uboot's git stuff into uboot-git.sh - split `uboot_prepare_git()` from `compile_uboot()` |
|
|
Ricardo Pardini
|
a51448a1da
|
armbian-next: non-Docker cleaning of deprecated mountpoints (before general_cleaning) | |
|
Ricardo Pardini
|
291b02577a
|
armbian-next: rename `compile_plymouth-theme-armbian()` to `compile_plymouth_theme_armbian()` for consistency | |
|
Ricardo Pardini
|
b9daf6d708
|
armbian-next: `extras/buildpkg.sh` code is out [deprecated, later completely dropped] | |
|
Ricardo Pardini
|
d24d3327a8
|
armbian-next: the great cli entrypoint (+docker) rewrite; introduce `USE_LOCAL_APT_DEB_CACHE` replacing `apt-cacher-ng`
- armbian-next: introduce `USE_LOCAL_APT_DEB_CACHE` (default `=yes`) as alternative/in addition to `apt-cacher-ng` (eg, in Docker)
- this uses `cache/aptcache/${RELEASE}-${ARCH}` (in the host) for
- apt cache, by bind-mounting it to `${SDCARD}/var/cache/apt` in the `chroot_sdcard_apt_get()` runner and its usages
- debootstrap, by passing it `--cache-dir`
- utility function to help understand what is happening to cache during usage
- apt itself mantains this cache, removing old packages when new ones are installed. apt does this _by default_
- introduce `DONT_MAINTAIN_APT_CACHE=yes` to skip out of automatic apt maintenance of apt cache, eg, during `remove`s
- don't do `apt clean` and such if using local cache, that would clean the cache, not the chroot
- clean up `install_deb_chroot()` a little, find an unrelated bug there
- WiP: the great cli entrypoint (+docker) rewrite, Phase 6: relaunching structure; re-pass ARMBIAN_BUILD_UUID; use ARMBIAN_COMMAND for log filename; fix for output/logs dir perms
- WiP: the great cli entrypoint (+docker) rewrite, Phase 5: cleanups 4/x; better logging, check & force `DEST_LANG`
- WiP: the great cli entrypoint (+docker) rewrite, Phase 5: cleanups 3/x; don't write to stderr in generated Dockerfile
- it's `drastic red` on non-buildx dockers
- WiP: the great cli entrypoint (+docker) rewrite, Phase 5: cleanups 2/x, logging
- WiP: the great cli entrypoint (+docker) rewrite, Phase 5: cleanups 1/x
- source configs in a logging section.
- Docker: silent, fast retries to make sure `docker system df` works
- shut-up `chown` (no `-v`) output related to `SET_OWNER_TO_UID`
- ask user to wait while `DESTIMG` is rsync'ed to `FINALDEST` -- it's potentially very slow
- use green apple for Mac logging, instead of red apple which might imply error...
- WiP: the great cli entrypoint (+docker) rewrite, Phase 4: run as non-root, maybe-with-Docker
- introduce `is_docker_ready_to_go()`; if it is, and we're not root, use Docker instead of sudo. <- GOOD IDEA? BAD IDEA? lol
- introduce `SET_OWNER_TO_UID` var to be passed to Docker/sudo so written files are owned by the launching user, not root.
- introduce `mkdir_recursive_and_set_uid_owner()` and `reset_uid_owner()` to reset owner based on `SET_OWNER_TO_UID`
- use it for userpatches files created, logs, and output files, including images and debs.
- @TODOs ref. `$SUDO_USER` which I think the old version of this?
- add a lot of @TODOs, ref being able to relaunch something that's not `build` inside Docker, also add/change params and configs and command.
- initially add `ARMBIAN_DOCKER_RELAUNCH_EXTRA_ARGS`
- WiP: the great cli entrypoint (+docker) rewrite, Phase 3: rpardini is demented, v3
- WiP: the great cli entrypoint (+docker) rewrite, Phase 2: rpardini is demented
- WiP: the great cli entrypoint (+docker) rewrite, Phase 1
- armbian-next: WiP: Docker: actually use the GHA-image as base; pull it every 24hs.
- using image in my private repo.
- this has significant speedup to "start building time" on the 1st run
- move some Linux specific stuff to its own if
- add comments and todo
- armbian-next: WiP: Docker, high-WiP, beginnings of Armbian mount dict, with linux/darwin preferences
- armbian-next: WiP: Docker, configure `BUILDKIT_COLORS`
- armbian-next: WiP: Docker, make docker image from Dockerfile more compact by flattening layers
- armbian-next: `logging`: add whale indicator if build running under Docker
- armbian-next: WiP: `docker`: working with `bookworm`, `sid`, and `jammy` on Darwin & Linux; works with `bullseye` on Linux only
- armbian-next: WiP: `docker`: force ARMBIAN_RUNNING_IN_CONTAINER both in Dockerfile and passed as `--env`; apt update and install in same layer; back to jammy
- armbian-next: introduce `armbian_is_running_in_container()` and `armbian_is_host_running_systemd()`, replacing `systemd-detect-virt` in multiple spots
- WiP: try with debian:bullseye -- can't detect docker at all
- armbian-next: WiP: 2nd stab at new Docker support; Darwin still works; Linux `docker.io` working
- gen .dockerignore together with Dockerfile
- split in funcs
- hacks for Linux and `/dev/loop` stuff, CONTAINER_COMPAT=yes
- mac still works, Linux stuff would break it but I if'fed
- armbian-next: the secrets of `CONTAINER_COMPAT` revealed; add size checking to check_loop_device() and avoid retry when `mknod`ing
- this fails for the right reasons now, causing retries, which are then retried and work ;-)
- this is related to building under Docker on Linux, using docker.io package (not docker-ce)
- armbian-next: remove `.dockerignore` and add it to `.gitignore`; it's going to be auto-generated
- armbian-next: `.dockerignore`: Docker context should only have minimal files and folders, to speed up Dockerfile build
- IMPORTANT: `.dockerignore` is going to be generated from now on: so this is the last commit with changes before removal
- armbian-next: WiP: initial stab at new Docker support; really run the passed cmdline; add Dockerfile to gitignore
- armbian-next: WiP: initial stab at new Docker support; generate Dockerfile; introduce REQUIREMENTS_DEFS_ONLY
- uses REQUIREMENTS_DEFS_ONLY
- works on Docker Desktop on Mac;
- linux TBA
- armbian-next: don't error out if `.git` not present; other small fixes
- armbian-next: general "work or at least don't misbehave when run on a very bare ubuntu:latest instance"
- can't assume things, for example:
- that `sudo` will be available; it might not, and might be already root, no reason to fail
- that `/etc/timezone` will exist
- that `systemd-detect-virt` will be available
- that `git` will be available
- that `locale-gen` will be available
|
|
Lane Jennison
|
28c7645a14
|
armbian-next: fix old fuction name refrence cleaning to general_cleaning | |
|
Ricardo Pardini
|
45c2728851
|
armbian-next: prepare a bin dir inside WORKDIR with a `python` symlink to `/usr/bin/python2` and add it to `PATH` | |
|
Ricardo Pardini
|
a1ff891b24
|
armbian-next: cleaning: don't complain about 'none' `CLEAN_LEVEL` | |
|
Ricardo Pardini
|
b25b3cf499
|
armbian-next: `lib` changes - MEGASQUASH - squashed changes from c9cf3fc241cfb4c872f4aef7bbc41d5854db7ea3 to 6809de3d6063cb041205a8318e19da6a4dee68c9 ref extensions_08_10_2022_pre_v30
- also compile.sh - shellfmt lib - split off shell and python tools under lib - revert removal of stuff a-n no longer uses (ref. compilation): general packaging, mkdeb etc - editoconfig split off - extension changes split off - sources and sources/families split off - some undue stuff removed or split armbian-next: manual merge (30) of lib changes between |
|
Markus Hoffrogge
|
950c659a4a
|
Add option BUILD_ONLY to the build compile scripts (#4455)
* Rename default-build.sh -> build-tasks.sh This commit is just a file rename without any further code change before this script will be refactored to improve build task structure for partial building. Refers to #4421 * Prepare build-tasks.sh for moving each build step to a dedicated function This commit is an intermediate update to reflect NO functional code changes of the particular build steps before moving the unmodified code into the appropriate function by copy/paste. Only build_get_boot_sources() has slightly changed to an appropriate if / fi structure. Note: This .sh file is bash syntactically not correct. The purpose of this commit is to leverage code review. Refers to #4421 * Update build-tasks.sh function do_default() for filtered function calls Function do_default(): - Add $1 function parameter for filtering build tasks and assign this to local variable $_buildOnly - move "pseudo inline"-functions to the beginning of the script - replace the "inline functions" by filtered function calls - add BUILD_ONLY variable to the build epilog print Refers to #4421 * Complete refactoring of build-tasks.sh for BUILD_ONLY support - update indentation of functions build_get_boot_sources() and build_get_kernel_sources() to meet code style - rename original function do_default() -> build_main() - create new do_default() for backward compatibility and comment this one as deprecated - call build_main "" from this deprecated do_default() - cli-entrypoint.sh: - update call of do_default by build_main "${BUILD_ONLY}" closes #4421 * Print final runtime as min:seconds As with filtered build runtimes may get below a minute, we would like to get the runtime printed with seconds. * Delete duplicate messages * Fix the confusion of the choice of building the kernel * Fix a typo in comment on do_default() * Backward compatibility of KERNEL_ONLY and new BUILD_ONLY keys. * interactive_config: replace KERNEL_ONLY on BUILD_ONLY * Fix: Correct verification when an image is created * Abort with error if BUILD_ONLY contains invalid build task names - add function build_validate_buildOnly() - call this function from build_main - fix position of KERNEL_ONLY / BUILD_ONLY contradiction message (did log empty _buildOnly content all time) - improve local variable names * Improve final error message to list valid BUILD_ONLY task names * Improve error message logging - collect multiple invalid BUILD_ONLY task names in a single error message - log final message for valid BUILD_ONLY task names on ext level - simple exit with exit code 1 in case of error * The RELEASE variable cannot be empty. Additional conditions for checking RELEASE are unacceptable. * Fix build_main() to use BUILD_ONLY inside instead of local var set from parameter $1 - build-tasks.sh: - build_main(): - don't take parameter $1 - replace usage of $_buildOnly by $BUILD_ONLY - added info messages on KERNEL_ONLY cases in case BUILD_ONLY was propagated - build_validate_buildOnly(): - remove parameter $2 - assign _buildOnly from global BUILD_ONLY accordingly - cli-entrypoint.sh: - call build_main without parameter * Choosing interactive_config if the goal is bootstrap * fix: order of selection backward_compatibility_build_only * Update function comments to match current state - removed obsolete parameter of build_main call do_default() - replaced :space: by :comma: in _kernel_buildOnly to leverage copy / paste for final repeatable command line printed after build * Improve logic coding to filter build tasks - build-tasks.sh: - added functions: - build_task_is_enabled() - build_task_one_of_is_enabled() - build_task_each_of_is_enabled() - updated existing build task filter logic to use function build_task_is_enabled - config-prepare.sh, prepare-host.sh: - replaced existing build task filter logic to use function build_task_is_enabled * Remove unused functions - remove function build_task_one_of_is_enabled() and build_task_each_of_is_enabled() according to code review Co-authored-by: The-going <48602507+The-going@users.noreply.github.com> |
|
hzy
|
0c72faf421 | Split out functions from `/lib/main.sh` |