mirror of https://github.com/armbian/build.git
Board: Add Mekotronics R58S2 (#9610)
Board config for Mekotronics R58S2 with u-boot 2026.04. WiFi BT ETH USB GPU confirmed working
This commit is contained in:
Mecid
GitHub
parent
8324bee7d6
commit
832f9db977
|
|
@ -0,0 +1,73 @@
|
|||
# Rockchip RK3588S SoC octa core 4-16GB SoC 1GbE eMMC USB3 NVMe WiFi/BT
|
||||
declare -g BOARD_NAME="Mekotronics R58S2"
|
||||
declare -g BOARD_VENDOR="mekotronics"
|
||||
declare -g BOARDFAMILY="rockchip-rk3588"
|
||||
declare -g BOARD_MAINTAINER="HeyMeco"
|
||||
declare -g KERNEL_TARGET="vendor"
|
||||
declare -g FULL_DESKTOP="yes"
|
||||
declare -g BOOT_LOGO="desktop"
|
||||
declare -g BOOT_FDT_FILE="rockchip/rk3588s-blueberry-rp01a-v10.dtb"
|
||||
declare -g DISPLAY_MANAGER="wayland"
|
||||
declare -g ASOUND_STATE="asound.state.rk3588hd"
|
||||
declare -g BOOT_SOC="rk3588"
|
||||
declare -g IMAGE_PARTITION_TABLE="gpt"
|
||||
declare -g BOOT_SCENARIO="tpl-blob-atf-mainline"
|
||||
|
||||
# Audio naming - applies to all branches
|
||||
function post_family_tweaks__mekotronics_r58s2_naming_audios() {
|
||||
display_alert "$BOARD" "Renaming r58s2 audios" "info"
|
||||
|
||||
mkdir -p "${SDCARD}/etc/udev/rules.d/"
|
||||
echo 'SUBSYSTEM=="sound", ENV{ID_PATH}=="platform-hdmi0-sound", ENV{SOUND_DESCRIPTION}="HDMI0 Audio"' > "${SDCARD}/etc/udev/rules.d/90-naming-audios.rules"
|
||||
echo 'SUBSYSTEM=="sound", ENV{ID_PATH}=="platform-es8316-sound", ENV{SOUND_DESCRIPTION}="ES8316 Audio"' >> "${SDCARD}/etc/udev/rules.d/90-naming-audios.rules"
|
||||
|
||||
return 0
|
||||
}
|
||||
|
||||
|
||||
# WiFi via bcmdhd driver
|
||||
enable_extension "bcmdhd"
|
||||
BCMDHD_TYPE="sdio"
|
||||
|
||||
# Bluetooth via hciattach
|
||||
declare -g BLUETOOTH_HCIATTACH_PARAMS="-s 115200 /dev/ttyS9 bcm43xx 115200 noflow nosleep"
|
||||
enable_extension "bluetooth-hciattach"
|
||||
|
||||
# DKMS bcmdhd-sdio replaces the in-kernel bcmdhd (PCIe) via depmod ordering;
|
||||
# set firmware paths for the AP6256 wifi chip on this board.
|
||||
function post_family_tweaks_bsp__mekotronics_r58s2_bcmdhd_sdio_firmware() {
|
||||
display_alert "$BOARD" "Configuring bcmdhd SDIO firmware paths for AP6256" "info"
|
||||
mkdir -p "${destination}/etc/modprobe.d/"
|
||||
cat > "${destination}/etc/modprobe.d/bcmdhd-r58s2.conf" <<- 'EOF'
|
||||
options bcmdhd firmware_path=/lib/firmware/fw_bcm43455c0_ag.bin
|
||||
options bcmdhd nvram_path=/lib/firmware/nvram_ap6256.txt
|
||||
EOF
|
||||
}
|
||||
|
||||
|
||||
# Mainline u-boot for all branches
|
||||
function post_family_config__meko_r58s2_use_mainline_uboot() {
|
||||
display_alert "$BOARD" "mainline u-boot overrides for $BOARD / $BRANCH" "info"
|
||||
|
||||
declare -g BOOTCONFIG="mekotronics-r58s2-rk3588s_defconfig"
|
||||
declare -g BOOTDELAY=1
|
||||
declare -g BOOTSOURCE="https://github.com/u-boot/u-boot.git"
|
||||
declare -g BOOTBRANCH="tag:v2026.04-rc2"
|
||||
declare -g BOOTPATCHDIR="v2026.04"
|
||||
declare -g BOOTDIR="u-boot-${BOARD}"
|
||||
|
||||
declare -g UBOOT_TARGET_MAP="BL31=bl31.elf ROCKCHIP_TPL=${RKBIN_DIR}/${DDR_BLOB};;u-boot-rockchip.bin"
|
||||
unset uboot_custom_postprocess write_uboot_platform write_uboot_platform_mtd
|
||||
|
||||
function write_uboot_platform() {
|
||||
dd "if=$1/u-boot-rockchip.bin" "of=$2" bs=32k seek=1 conv=notrunc status=none
|
||||
}
|
||||
|
||||
}
|
||||
|
||||
function pre_config_uboot_target__meko_r58s2_patch_rockchip_common_boot_order() {
|
||||
declare -a rockchip_uboot_targets=("nvme" "mmc0" "usb" "pxe" "dhcp")
|
||||
display_alert "u-boot for ${BOARD}/${BRANCH}" "u-boot: adjust boot order to '${rockchip_uboot_targets[*]}'" "info"
|
||||
sed -i -e "s/#define BOOT_TARGETS.*/#define BOOT_TARGETS \"${rockchip_uboot_targets[*]}\"/" include/configs/rockchip-common.h
|
||||
regular_git diff -u include/configs/rockchip-common.h || true
|
||||
}
|
||||
|
|
@ -0,0 +1,230 @@
|
|||
CONFIG_ARM=y
|
||||
CONFIG_ARCH_ROCKCHIP=y
|
||||
CONFIG_SPL_GPIO_SUPPORT=y
|
||||
CONFIG_SPL_LIBCOMMON_SUPPORT=y
|
||||
CONFIG_SPL_LIBGENERIC_SUPPORT=y
|
||||
CONFIG_SYS_MALLOC_F_LEN=0x80000
|
||||
CONFIG_SPL_FIT_GENERATOR="arch/arm/mach-rockchip/make_fit_atf.sh"
|
||||
CONFIG_ROCKCHIP_RK3588=y
|
||||
CONFIG_ROCKCHIP_FIT_IMAGE=y
|
||||
CONFIG_ROCKCHIP_HWID_DTB=y
|
||||
CONFIG_ROCKCHIP_VENDOR_PARTITION=y
|
||||
CONFIG_USING_KERNEL_DTB_V2=y
|
||||
CONFIG_ROCKCHIP_FIT_IMAGE_PACK=y
|
||||
CONFIG_ROCKCHIP_NEW_IDB=y
|
||||
CONFIG_PSTORE=y
|
||||
CONFIG_SPL_SERIAL_SUPPORT=y
|
||||
CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
|
||||
CONFIG_TARGET_EVB_RK3588=y
|
||||
CONFIG_SPL_LIBDISK_SUPPORT=y
|
||||
CONFIG_SPL_SPI_FLASH_SUPPORT=y
|
||||
CONFIG_SPL_SPI_SUPPORT=y
|
||||
CONFIG_DEFAULT_DEVICE_TREE="rk3588s-blueberry-rp01a"
|
||||
CONFIG_DEBUG_UART=y
|
||||
CONFIG_LOCALVERSION="-armbian"
|
||||
# CONFIG_LOCALVERSION_AUTO is not set
|
||||
CONFIG_FIT=y
|
||||
CONFIG_FIT_IMAGE_POST_PROCESS=y
|
||||
CONFIG_FIT_HW_CRYPTO=y
|
||||
CONFIG_SPL_LOAD_FIT=y
|
||||
CONFIG_SPL_FIT_IMAGE_POST_PROCESS=y
|
||||
CONFIG_SPL_FIT_HW_CRYPTO=y
|
||||
# CONFIG_SPL_SYS_DCACHE_OFF is not set
|
||||
CONFIG_BOOTDELAY=1
|
||||
CONFIG_SYS_CONSOLE_INFO_QUIET=y
|
||||
# CONFIG_DISPLAY_CPUINFO is not set
|
||||
CONFIG_ANDROID_BOOTLOADER=y
|
||||
CONFIG_ANDROID_AVB=y
|
||||
CONFIG_ANDROID_BOOT_IMAGE_HASH=y
|
||||
CONFIG_SPL_BOARD_INIT=y
|
||||
# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
|
||||
# CONFIG_SPL_LEGACY_IMAGE_SUPPORT is not set
|
||||
CONFIG_SPL_SEPARATE_BSS=y
|
||||
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION=y
|
||||
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION=0x1
|
||||
CONFIG_SPL_MTD_SUPPORT=y
|
||||
CONFIG_SPL_ATF=y
|
||||
CONFIG_SPL_AB=y
|
||||
CONFIG_FASTBOOT_BUF_ADDR=0xc00800
|
||||
CONFIG_FASTBOOT_BUF_SIZE=0x07000000
|
||||
CONFIG_FASTBOOT_FLASH=y
|
||||
CONFIG_FASTBOOT_FLASH_MMC_DEV=0
|
||||
CONFIG_CMD_BOOTZ=y
|
||||
CONFIG_CMD_DTIMG=y
|
||||
# CONFIG_CMD_ELF is not set
|
||||
# CONFIG_CMD_IMI is not set
|
||||
# CONFIG_CMD_IMLS is not set
|
||||
# CONFIG_CMD_XIMG is not set
|
||||
# CONFIG_CMD_LZMADEC is not set
|
||||
# CONFIG_CMD_UNZIP is not set
|
||||
# CONFIG_CMD_FLASH is not set
|
||||
# CONFIG_CMD_FPGA is not set
|
||||
CONFIG_CMD_GPT=y
|
||||
# CONFIG_CMD_LOADB is not set
|
||||
# CONFIG_CMD_LOADS is not set
|
||||
CONFIG_CMD_BOOT_ANDROID=y
|
||||
CONFIG_CMD_MMC=y
|
||||
CONFIG_CMD_SF=y
|
||||
CONFIG_CMD_SPI=y
|
||||
CONFIG_CMD_USB=y
|
||||
CONFIG_CMD_USB_MASS_STORAGE=y
|
||||
# CONFIG_CMD_ITEST is not set
|
||||
# CONFIG_CMD_SETEXPR is not set
|
||||
CONFIG_CMD_TFTPPUT=y
|
||||
CONFIG_CMD_TFTP_BOOTM=y
|
||||
CONFIG_CMD_TFTP_FLASH=y
|
||||
# CONFIG_CMD_MISC is not set
|
||||
CONFIG_CMD_MTD_BLK=y
|
||||
# CONFIG_SPL_DOS_PARTITION is not set
|
||||
# CONFIG_ISO_PARTITION is not set
|
||||
CONFIG_EFI_PARTITION_ENTRIES_NUMBERS=64
|
||||
CONFIG_SPL_OF_CONTROL=y
|
||||
CONFIG_SPL_DTB_MINIMUM=y
|
||||
CONFIG_OF_LIVE=y
|
||||
CONFIG_OF_SPL_REMOVE_PROPS="clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
|
||||
CONFIG_OF_U_BOOT_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
|
||||
# CONFIG_NET_TFTP_VARS is not set
|
||||
CONFIG_REGMAP=y
|
||||
CONFIG_SPL_REGMAP=y
|
||||
CONFIG_SYSCON=y
|
||||
CONFIG_SPL_SYSCON=y
|
||||
# CONFIG_SARADC_ROCKCHIP is not set
|
||||
CONFIG_SARADC_ROCKCHIP_V2=y
|
||||
CONFIG_CLK=y
|
||||
CONFIG_SPL_CLK=y
|
||||
CONFIG_CLK_SCMI=y
|
||||
CONFIG_SPL_CLK_SCMI=y
|
||||
CONFIG_DM_CRYPTO=y
|
||||
CONFIG_SPL_DM_CRYPTO=y
|
||||
CONFIG_ROCKCHIP_CRYPTO_V2=y
|
||||
CONFIG_SPL_ROCKCHIP_CRYPTO_V2=y
|
||||
CONFIG_DM_RNG=y
|
||||
CONFIG_RNG_ROCKCHIP=y
|
||||
CONFIG_SCMI_FIRMWARE=y
|
||||
CONFIG_SPL_SCMI_FIRMWARE=y
|
||||
CONFIG_GPIO_HOG=y
|
||||
CONFIG_ROCKCHIP_GPIO=y
|
||||
CONFIG_ROCKCHIP_GPIO_V2=y
|
||||
CONFIG_SYS_I2C_ROCKCHIP=y
|
||||
CONFIG_I2C_MUX=y
|
||||
CONFIG_DM_KEY=y
|
||||
CONFIG_RK8XX_PWRKEY=y
|
||||
CONFIG_ADC_KEY=y
|
||||
CONFIG_MISC=y
|
||||
CONFIG_SPL_MISC=y
|
||||
CONFIG_MISC_DECOMPRESS=y
|
||||
CONFIG_SPL_MISC_DECOMPRESS=y
|
||||
CONFIG_ROCKCHIP_OTP=y
|
||||
CONFIG_ROCKCHIP_HW_DECOMPRESS=y
|
||||
CONFIG_SPL_ROCKCHIP_HW_DECOMPRESS=y
|
||||
CONFIG_SPL_ROCKCHIP_SECURE_OTP=y
|
||||
CONFIG_MMC_DW=y
|
||||
CONFIG_MMC_DW_ROCKCHIP=y
|
||||
CONFIG_MMC_SDHCI=y
|
||||
CONFIG_MMC_SDHCI_SDMA=y
|
||||
CONFIG_MMC_SDHCI_ROCKCHIP=y
|
||||
CONFIG_MTD=y
|
||||
CONFIG_MTD_BLK=y
|
||||
CONFIG_MTD_DEVICE=y
|
||||
CONFIG_NAND=y
|
||||
CONFIG_MTD_SPI_NAND=y
|
||||
CONFIG_SPI_FLASH=y
|
||||
CONFIG_SF_DEFAULT_SPEED=80000000
|
||||
CONFIG_SPI_FLASH_EON=y
|
||||
CONFIG_SPI_FLASH_GIGADEVICE=y
|
||||
CONFIG_SPI_FLASH_MACRONIX=y
|
||||
CONFIG_SPI_FLASH_SST=y
|
||||
CONFIG_SPI_FLASH_WINBOND=y
|
||||
CONFIG_SPI_FLASH_XMC=y
|
||||
CONFIG_SPI_FLASH_XTX=y
|
||||
CONFIG_SPI_FLASH_MTD=y
|
||||
CONFIG_DM_ETH=y
|
||||
CONFIG_DM_ETH_PHY=y
|
||||
CONFIG_DWC_ETH_QOS=y
|
||||
CONFIG_GMAC_ROCKCHIP=y
|
||||
CONFIG_PHY_ROCKCHIP_INNO_USB2=y
|
||||
CONFIG_PHY_ROCKCHIP_SAMSUNG_HDPTX=y
|
||||
CONFIG_PHY_ROCKCHIP_USBDP=y
|
||||
CONFIG_PINCTRL=y
|
||||
CONFIG_SPL_PINCTRL=y
|
||||
CONFIG_DM_FUEL_GAUGE=y
|
||||
CONFIG_POWER_FG_CW201X=y
|
||||
CONFIG_POWER_FG_CW221X=y
|
||||
CONFIG_DM_PMIC=y
|
||||
CONFIG_PMIC_SPI_RK8XX=y
|
||||
CONFIG_DM_POWER_DELIVERY=y
|
||||
CONFIG_TYPEC_TCPM=y
|
||||
CONFIG_TYPEC_TCPCI=y
|
||||
CONFIG_TYPEC_HUSB311=y
|
||||
CONFIG_TYPEC_FUSB302=y
|
||||
CONFIG_REGULATOR_PWM=y
|
||||
CONFIG_DM_REGULATOR_FIXED=y
|
||||
CONFIG_DM_REGULATOR_GPIO=y
|
||||
CONFIG_REGULATOR_RK860X=y
|
||||
CONFIG_CHARGER_BQ25700=y
|
||||
CONFIG_CHARGER_BQ25890=y
|
||||
CONFIG_CHARGER_SC8551=y
|
||||
CONFIG_CHARGER_SGM41542=y
|
||||
CONFIG_DM_CHARGE_DISPLAY=y
|
||||
CONFIG_CHARGE_ANIMATION=y
|
||||
CONFIG_PWM_ROCKCHIP=y
|
||||
CONFIG_RAM=y
|
||||
CONFIG_SPL_RAM=y
|
||||
CONFIG_TPL_RAM=y
|
||||
CONFIG_DM_RAMDISK=y
|
||||
CONFIG_RAMDISK_RO=y
|
||||
CONFIG_DM_RESET=y
|
||||
CONFIG_SPL_DM_RESET=y
|
||||
CONFIG_SPL_RESET_ROCKCHIP=y
|
||||
CONFIG_BAUDRATE=1500000
|
||||
CONFIG_DEBUG_UART_BASE=0xFEB50000
|
||||
CONFIG_DEBUG_UART_CLOCK=24000000
|
||||
CONFIG_DEBUG_UART_SHIFT=2
|
||||
CONFIG_ROCKCHIP_SPI=y
|
||||
CONFIG_ROCKCHIP_SFC=y
|
||||
CONFIG_SYSRESET=y
|
||||
CONFIG_USB=y
|
||||
CONFIG_USB_XHCI_HCD=y
|
||||
CONFIG_USB_XHCI_DWC3=y
|
||||
CONFIG_USB_EHCI_HCD=y
|
||||
CONFIG_USB_EHCI_GENERIC=y
|
||||
CONFIG_USB_OHCI_HCD=y
|
||||
CONFIG_USB_OHCI_GENERIC=y
|
||||
CONFIG_USB_DWC3=y
|
||||
CONFIG_USB_DWC3_GADGET=y
|
||||
CONFIG_USB_DWC3_GENERIC=y
|
||||
CONFIG_USB_STORAGE=y
|
||||
CONFIG_USB_GADGET=y
|
||||
CONFIG_USB_GADGET_MANUFACTURER="Rockchip"
|
||||
CONFIG_USB_GADGET_VENDOR_NUM=0x2207
|
||||
CONFIG_USB_GADGET_PRODUCT_NUM=0x350a
|
||||
CONFIG_USB_GADGET_DOWNLOAD=y
|
||||
CONFIG_DM_VIDEO=y
|
||||
CONFIG_DISPLAY=y
|
||||
CONFIG_DRM_ROCKCHIP=y
|
||||
CONFIG_DRM_MAXIM_MAX96745=y
|
||||
CONFIG_DRM_MAXIM_MAX96755F=y
|
||||
CONFIG_DRM_ROHM_BU18XL82=y
|
||||
CONFIG_DRM_ROCKCHIP_DW_HDMI_QP=y
|
||||
CONFIG_DRM_ROCKCHIP_DW_MIPI_DSI2=y
|
||||
CONFIG_DRM_ROCKCHIP_DW_DP=y
|
||||
CONFIG_DRM_ROCKCHIP_ANALOGIX_DP=y
|
||||
CONFIG_DRM_ROCKCHIP_SAMSUNG_MIPI_DCPHY=y
|
||||
CONFIG_PHY_ROCKCHIP_SAMSUNG_HDPTX_HDMI=y
|
||||
CONFIG_USE_TINY_PRINTF=y
|
||||
CONFIG_LIB_RAND=y
|
||||
CONFIG_SPL_TINY_MEMSET=y
|
||||
CONFIG_RSA=y
|
||||
CONFIG_SPL_RSA=y
|
||||
CONFIG_RSA_N_SIZE=0x200
|
||||
CONFIG_RSA_E_SIZE=0x10
|
||||
CONFIG_RSA_C_SIZE=0x20
|
||||
CONFIG_XBC=y
|
||||
CONFIG_LZ4=y
|
||||
CONFIG_LZMA=y
|
||||
# CONFIG_EFI_LOADER is not set
|
||||
CONFIG_AVB_LIBAVB=y
|
||||
CONFIG_AVB_LIBAVB_AB=y
|
||||
CONFIG_AVB_LIBAVB_ATX=y
|
||||
CONFIG_AVB_LIBAVB_USER=y
|
||||
CONFIG_RK_AVB_LIBAVB_USER=y
|
||||
|
|
@ -0,0 +1,38 @@
|
|||
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
/*
|
||||
* Copyright (c) 2021 Rockchip Electronics Co., Ltd.
|
||||
*
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
#include "rk3588.dtsi"
|
||||
#include "rk3588-u-boot.dtsi"
|
||||
#include <dt-bindings/input/input.h>
|
||||
|
||||
|
||||
/ {
|
||||
model = "Rockchip RK3588S2 Blueberry V10 Board 20251213";
|
||||
compatible = "rockchip,rk3588s-Blueberry-v10", "rockchip,rk3588";
|
||||
|
||||
leds: leds {
|
||||
compatible = "gpio-leds";
|
||||
green_led: green-led {
|
||||
gpios = <&gpio1 RK_PA2 GPIO_ACTIVE_HIGH>;
|
||||
linux,default-trigger = "heartbeat";
|
||||
default-state = "on";
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
|
||||
&sdhci {
|
||||
bus-width = <8>;
|
||||
no-sdio;
|
||||
no-sd;
|
||||
non-removable;
|
||||
max-frequency = <200000000>;
|
||||
mmc-hs400-1_8v;
|
||||
mmc-hs400-enhanced-strobe;
|
||||
status = "okay";
|
||||
};
|
||||
|
|
@ -0,0 +1,109 @@
|
|||
CONFIG_ARM=y
|
||||
CONFIG_SKIP_LOWLEVEL_INIT=y
|
||||
CONFIG_SYS_HAS_NONCACHED_MEMORY=y
|
||||
CONFIG_COUNTER_FREQUENCY=24000000
|
||||
CONFIG_ARCH_ROCKCHIP=y
|
||||
CONFIG_DEFAULT_DEVICE_TREE="rockchip/rk3588s-mekotronics-r58s2"
|
||||
CONFIG_ROCKCHIP_RK3588=y
|
||||
CONFIG_SPL_SERIAL=y
|
||||
CONFIG_TARGET_ROCK5B_RK3588=y
|
||||
CONFIG_SYS_LOAD_ADDR=0xc00800
|
||||
CONFIG_DEBUG_UART_BASE=0xFEB50000
|
||||
CONFIG_DEBUG_UART_CLOCK=24000000
|
||||
CONFIG_PCI=y
|
||||
CONFIG_DEBUG_UART=y
|
||||
CONFIG_FIT=y
|
||||
CONFIG_FIT_VERBOSE=y
|
||||
CONFIG_SPL_FIT_SIGNATURE=y
|
||||
CONFIG_SPL_LOAD_FIT=y
|
||||
CONFIG_LEGACY_IMAGE_FORMAT=y
|
||||
CONFIG_OF_BOARD_SETUP=y
|
||||
# CONFIG_DISPLAY_CPUINFO is not set
|
||||
CONFIG_DISPLAY_BOARDINFO_LATE=y
|
||||
CONFIG_SPL_MAX_SIZE=0x40000
|
||||
# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
|
||||
CONFIG_SPL_ATF=y
|
||||
CONFIG_USE_PREBOOT=y
|
||||
CONFIG_PREBOOT="led STATUS on; sleep 0.1; led STATUS off; sleep 0.1; led STATUS on;"
|
||||
CONFIG_CMD_EFIDEBUG=y
|
||||
CONFIG_CMD_NVEDIT_EFI=y
|
||||
CONFIG_CMD_MISC=y
|
||||
CONFIG_CMD_BTRFS=y
|
||||
CONFIG_CMD_GPIO=y
|
||||
CONFIG_CMD_GPT=y
|
||||
CONFIG_CMD_I2C=y
|
||||
CONFIG_CMD_MMC=y
|
||||
CONFIG_CMD_NFS=y
|
||||
CONFIG_CMD_PCI=y
|
||||
CONFIG_CMD_TCPM=y
|
||||
CONFIG_CMD_USB=y
|
||||
CONFIG_CMD_ROCKUSB=y
|
||||
CONFIG_CMD_USB_MASS_STORAGE=y
|
||||
CONFIG_CMD_WGET=y
|
||||
CONFIG_CMD_DNS=y
|
||||
# CONFIG_CMD_SETEXPR is not set
|
||||
CONFIG_CMD_REGULATOR=y
|
||||
# CONFIG_SPL_DOS_PARTITION is not set
|
||||
CONFIG_SPL_OF_CONTROL=y
|
||||
CONFIG_OF_LIVE=y
|
||||
CONFIG_OF_SPL_REMOVE_PROPS="clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
|
||||
CONFIG_SPL_DM_SEQ_ALIAS=y
|
||||
CONFIG_SPL_REGMAP=y
|
||||
CONFIG_SPL_SYSCON=y
|
||||
CONFIG_SPL_CLK=y
|
||||
# CONFIG_USB_FUNCTION_FASTBOOT is not set
|
||||
CONFIG_ROCKCHIP_GPIO=y
|
||||
CONFIG_SYS_I2C_ROCKCHIP=y
|
||||
CONFIG_LED=y
|
||||
CONFIG_LED_GPIO=y
|
||||
CONFIG_MISC=y
|
||||
CONFIG_SUPPORT_EMMC_RPMB=y
|
||||
CONFIG_MMC_DW=y
|
||||
CONFIG_MMC_DW_ROCKCHIP=y
|
||||
CONFIG_MMC_SDHCI=y
|
||||
CONFIG_MMC_SDHCI_SDMA=y
|
||||
CONFIG_MMC_SDHCI_ROCKCHIP=y
|
||||
CONFIG_PHY_REALTEK=y
|
||||
CONFIG_DWC_ETH_QOS=y
|
||||
CONFIG_DWC_ETH_QOS_ROCKCHIP=y
|
||||
CONFIG_NVME_PCI=y
|
||||
CONFIG_PCIE_DW_ROCKCHIP=y
|
||||
CONFIG_PHY_ROCKCHIP_INNO_USB2=y
|
||||
CONFIG_PHY_ROCKCHIP_NANENG_COMBOPHY=y
|
||||
CONFIG_PHY_ROCKCHIP_USBDP=y
|
||||
CONFIG_SPL_PINCTRL=y
|
||||
CONFIG_PWM_ROCKCHIP=y
|
||||
CONFIG_SPL_RAM=y
|
||||
CONFIG_PROT_TCP=y
|
||||
CONFIG_PROT_TCP_SACK=y
|
||||
CONFIG_BAUDRATE=1500000
|
||||
CONFIG_DEBUG_UART_SHIFT=2
|
||||
CONFIG_SYS_NS16550_MEM32=y
|
||||
CONFIG_SYSRESET=y
|
||||
CONFIG_LZO=y
|
||||
CONFIG_BZIP2=y
|
||||
CONFIG_ZSTD=y
|
||||
CONFIG_USB=y
|
||||
CONFIG_USB_XHCI_HCD=y
|
||||
CONFIG_USB_EHCI_HCD=y
|
||||
CONFIG_USB_EHCI_GENERIC=y
|
||||
CONFIG_USB_OHCI_HCD=y
|
||||
CONFIG_USB_OHCI_GENERIC=y
|
||||
CONFIG_USB_DWC3=y
|
||||
CONFIG_USB_DWC3_GENERIC=y
|
||||
CONFIG_SPL_USB_DWC3_GENERIC=y
|
||||
CONFIG_TYPEC_TCPM=y
|
||||
CONFIG_TYPEC_FUSB302=y
|
||||
CONFIG_USB_HOST_ETHER=y
|
||||
CONFIG_USB_ETHER_ASIX=y
|
||||
CONFIG_USB_ETHER_ASIX88179=y
|
||||
CONFIG_USB_ETHER_LAN75XX=y
|
||||
CONFIG_USB_ETHER_LAN78XX=y
|
||||
CONFIG_USB_ETHER_MCS7830=y
|
||||
CONFIG_USB_ETHER_RTL8152=y
|
||||
CONFIG_USB_ETHER_SMSC95XX=y
|
||||
CONFIG_USB_GADGET=y
|
||||
CONFIG_USB_GADGET_DOWNLOAD=y
|
||||
CONFIG_USB_FUNCTION_ROCKUSB=y
|
||||
CONFIG_USB_FUNCTION_ACM=y
|
||||
CONFIG_ERRNO_STR=y
|
||||
|
|
@ -0,0 +1,79 @@
|
|||
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
/*
|
||||
* Mekotronics R58S2 - u-boot device tree
|
||||
*
|
||||
* Minimal DTS for u-boot: eMMC, LED, USB gadget.
|
||||
* The full board DTS lives in the kernel tree.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
#include "rk3588s.dtsi"
|
||||
#include "rk3588s-u-boot.dtsi"
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
|
||||
/ {
|
||||
model = "Mekotronics R58S2";
|
||||
compatible = "mekotronics,r58s2", "rockchip,rk3588s";
|
||||
|
||||
aliases {
|
||||
mmc0 = &sdhci;
|
||||
};
|
||||
|
||||
chosen {
|
||||
stdout-path = "serial2:1500000n8";
|
||||
};
|
||||
|
||||
leds: leds {
|
||||
compatible = "gpio-leds";
|
||||
green_led: green-led {
|
||||
gpios = <&gpio1 RK_PA2 GPIO_ACTIVE_HIGH>;
|
||||
linux,default-trigger = "heartbeat";
|
||||
default-state = "on";
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&sdhci {
|
||||
bus-width = <8>;
|
||||
no-sdio;
|
||||
no-sd;
|
||||
non-removable;
|
||||
max-frequency = <200000000>;
|
||||
mmc-hs400-1_8v;
|
||||
mmc-hs400-enhanced-strobe;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&combphy0_ps {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pcie2x1l2 {
|
||||
reset-gpios = <&gpio3 RK_PD1 GPIO_ACTIVE_HIGH>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&u2phy0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&u2phy0_otg {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usbdp_phy0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart2 {
|
||||
pinctrl-0 = <&uart2m0_xfer>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host0_xhci {
|
||||
dr_mode = "peripheral";
|
||||
maximum-speed = "high-speed";
|
||||
status = "okay";
|
||||
};
|
||||
Loading…
Reference in New Issue