Merge branch 'next' into for-linus

First round of input updates for 3.14.

CREDITS

@@ -655,6 +655,11 @@ S: Stanford University
 S: Stanford, California 94305
 S: USA
 
+N: Carlos Chinea
+E: carlos.chinea@nokia.com
+E: cch.devel@gmail.com
+D: Author of HSI Subsystem
+
 N: Randolph Chung
 E: tausq@debian.org
 D: Linux/PA-RISC hacker

Documentation/DocBook/media/v4l/vidioc-expbuf.xml

@@ -73,7 +73,8 @@ range from zero to the maximal number of valid planes for the currently active
 format. For the single-planar API, applications must set <structfield> plane
 </structfield> to zero.  Additional flags may be posted in the <structfield>
 flags </structfield> field.  Refer to a manual for open() for details.
-Currently only O_CLOEXEC is supported.  All other fields must be set to zero.
+Currently only O_CLOEXEC, O_RDONLY, O_WRONLY, and O_RDWR are supported.  All
+other fields must be set to zero.
 In the case of multi-planar API, every plane is exported separately using
 multiple <constant> VIDIOC_EXPBUF </constant> calls. </para>
 
@@ -170,8 +171,9 @@ multi-planar API. Otherwise this value must be set to zero. </entry>
 	    <entry>__u32</entry>
 	    <entry><structfield>flags</structfield></entry>
 	    <entry>Flags for the newly created file, currently only <constant>
-O_CLOEXEC </constant> is supported, refer to the manual of open() for more
+O_CLOEXEC </constant>, <constant>O_RDONLY</constant>, <constant>O_WRONLY
-details.</entry>
+</constant>, and <constant>O_RDWR</constant> are supported, refer to the manual
+of open() for more details.</entry>
 	  </row>
 	  <row>
 	    <entry>__s32</entry>

Documentation/assoc_array.txt

@@ -164,10 +164,10 @@ This points to a number of methods, all of which need to be provided:
 
  (4) Diff the index keys of two objects.
 
-	int (*diff_objects)(const void *a, const void *b);
+	int (*diff_objects)(const void *object, const void *index_key);
 
-     Return the bit position at which the index keys of two objects differ or
+     Return the bit position at which the index key of the specified object
-     -1 if they are the same.
+     differs from the given index key or -1 if they are the same.
 
 
  (5) Free an object.

Documentation/device-mapper/cache.txt

@@ -266,10 +266,12 @@ E.g.
 Invalidation is removing an entry from the cache without writing it
 back.  Cache blocks can be invalidated via the invalidate_cblocks
 message, which takes an arbitrary number of cblock ranges.  Each cblock
-must be expressed as a decimal value, in the future a variant message
+range's end value is "one past the end", meaning 5-10 expresses a range
-that takes cblock ranges expressed in hexidecimal may be needed to
+of values from 5 to 9.  Each cblock must be expressed as a decimal
-better support efficient invalidation of larger caches.  The cache must
+value, in the future a variant message that takes cblock ranges
-be in passthrough mode when invalidate_cblocks is used.
+expressed in hexidecimal may be needed to better support efficient
+invalidation of larger caches.  The cache must be in passthrough mode
+when invalidate_cblocks is used.
 
    invalidate_cblocks [<cblock>|<cblock begin>-<cblock end>]*
 

Documentation/devicetree/bindings/input/gpio-beeper.txt

@@ -0,0 +1,13 @@
+* GPIO beeper device tree bindings
+
+Register a beeper connected to GPIO pin.
+
+Required properties:
+- compatible:	Should be "gpio-beeper".
+- gpios:	From common gpio binding; gpio connection to beeper enable pin.
+
+Example:
+	beeper: beeper {
+		compatible = "gpio-beeper";
+		gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
+	};

Documentation/devicetree/bindings/input/touchscreen/tsc2007.txt

@@ -0,0 +1,41 @@
+* Texas Instruments tsc2007 touchscreen controller
+
+Required properties:
+- compatible: must be "ti,tsc2007".
+- reg: I2C address of the chip.
+- ti,x-plate-ohms: X-plate resistance in ohms.
+
+Optional properties:
+- gpios: the interrupt gpio the chip is connected to (trough the penirq pin).
+  The penirq pin goes to low when the panel is touched.
+  (see GPIO binding[1] for more details).
+- interrupt-parent: the phandle for the gpio controller
+  (see interrupt binding[0]).
+- interrupts: (gpio) interrupt to which the chip is connected
+  (see interrupt binding[0]).
+- ti,max-rt: maximum pressure.
+- ti,fuzzx: specifies the absolute input fuzz x value.
+  If set, it will permit noise in the data up to +- the value given to the fuzz
+  parameter, that is used to filter noise from the event stream.
+- ti,fuzzy: specifies the absolute input fuzz y value.
+- ti,fuzzz: specifies the absolute input fuzz z value.
+- ti,poll-period: how much time to wait (in milliseconds) before reading again the
+  values from the tsc2007.
+
+[0]: Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
+[1]: Documentation/devicetree/bindings/gpio/gpio.txt
+
+Example:
+	&i2c1 {
+		/* ... */
+		tsc2007@49 {
+			compatible = "ti,tsc2007";
+			reg = <0x49>;
+			interrupt-parent = <&gpio4>;
+			interrupts = <0x0 0x8>;
+			gpios = <&gpio4 0 0>;
+			ti,x-plate-ohms = <180>;
+		};
+
+		/* ... */
+	};

Documentation/devicetree/bindings/input/twl4030-keypad.txt

@@ -0,0 +1,27 @@
+* TWL4030's Keypad Controller device tree bindings
+
+TWL4030's Keypad controller is used to interface a SoC with a matrix-type
+keypad device. The keypad controller supports multiple row and column lines.
+A key can be placed at each intersection of a unique row and a unique column.
+The keypad controller can sense a key-press and key-release and report the
+event using a interrupt to the cpu.
+
+This binding is based on the matrix-keymap binding with the following
+changes:
+
+ * keypad,num-rows and keypad,num-columns are required.
+
+Required SoC Specific Properties:
+- compatible: should be one of the following
+   - "ti,twl4030-keypad": For controllers compatible with twl4030 keypad
+      controller.
+- interrupt: should be one of the following
+   - <1>: For controllers compatible with twl4030 keypad controller.
+
+Example:
+	twl_keypad: keypad {
+		compatible = "ti,twl4030-keypad";
+		interrupts = <1>;
+		keypad,num-rows = <8>;
+		keypad,num-columns = <8>;
+	};

Documentation/devicetree/bindings/input/twl4030-pwrbutton.txt

@@ -0,0 +1,21 @@
+Texas Instruments TWL family (twl4030) pwrbutton module
+
+This module is part of the TWL4030. For more details about the whole
+chip see Documentation/devicetree/bindings/mfd/twl-familly.txt.
+
+This module provides a simple power button event via an Interrupt.
+
+Required properties:
+- compatible: should be one of the following
+   - "ti,twl4030-pwrbutton": For controllers compatible with twl4030
+- interrupts: should be one of the following
+   - <8>: For controllers compatible with twl4030
+
+Example:
+
+&twl {
+	twl_pwrbutton: pwrbutton {
+		compatible = "ti,twl4030-pwrbutton";
+		interrupts = <8>;
+	};
+};

Documentation/devicetree/bindings/net/davinci_emac.txt

@@ -4,7 +4,7 @@ This file provides information, what the device node
 for the davinci_emac interface contains.
 
 Required properties:
-- compatible: "ti,davinci-dm6467-emac";
+- compatible: "ti,davinci-dm6467-emac" or "ti,am3517-emac"
 - reg: Offset and length of the register set for the device
 - ti,davinci-ctrl-reg-offset: offset to control register
 - ti,davinci-ctrl-mod-reg-offset: offset to control module register

Documentation/devicetree/bindings/net/smsc-lan91c111.txt

@@ -8,3 +8,7 @@ Required properties:
 Optional properties:
 - phy-device : phandle to Ethernet phy
 - local-mac-address : Ethernet mac address to use
+- reg-io-width : Mask of sizes (in bytes) of the IO accesses that
+  are supported on the device.  Valid value for SMSC LAN91c111 are
+  1, 2 or 4.  If it's omitted or invalid, the size would be 2 meaning
+  16-bit access only.

Documentation/input/gamepad.txt

@@ -68,7 +68,7 @@ features that you need, first. How each feature is mapped is described below.
 Legacy drivers often don't comply to these rules. As we cannot change them
 for backwards-compatibility reasons, you need to provide fixup mappings in
 user-space yourself. Some of them might also provide module-options that
-change the mappings so you can adivce users to set these.
+change the mappings so you can advise users to set these.
 
 All new gamepads are supposed to comply with this mapping. Please report any
 bugs, if they don't.
@@ -150,10 +150,10 @@ Menu-Pad:
                   BTN_START
   Many pads also have a third button which is branded or has a special symbol
   and meaning. Such buttons are mapped as BTN_MODE. Examples are the Nintendo
-  "HOME" button, the XBox "X"-button or Sony "P" button.
+  "HOME" button, the XBox "X"-button or Sony "PS" button.
 
 Rumble:
-  Rumble is adverticed as FF_RUMBLE.
+  Rumble is advertised as FF_RUMBLE.
 
 ----------------------------------------------------------------------------
   Written 2013 by David Herrmann <dh.herrmann@gmail.com>

Documentation/input/joystick-api.txt

@@ -16,14 +16,14 @@ joystick.
 
 By default, the device is opened in blocking mode.
 
-	int fd = open ("/dev/js0", O_RDONLY);
+	int fd = open ("/dev/input/js0", O_RDONLY);
 
 
 2. Event Reading
 ~~~~~~~~~~~~~~~~
 
 	struct js_event e;
-	read (fd, &e, sizeof(struct js_event));
+	read (fd, &e, sizeof(e));
 
 where js_event is defined as
 
@@ -34,8 +34,8 @@ where js_event is defined as
 		__u8 number;    /* axis/button number */
 	};
 
-If the read is successful, it will return sizeof(struct js_event), unless
+If the read is successful, it will return sizeof(e), unless you wanted to read
-you wanted to read more than one event per read as described in section 3.1.
+more than one event per read as described in section 3.1.
 
 
 2.1 js_event.type
@@ -99,9 +99,9 @@ may work well if you handle JS_EVENT_INIT events separately,
 
 	if ((js_event.type & ~JS_EVENT_INIT) == JS_EVENT_BUTTON) {
 		if (js_event.value)
-	        	buttons_state |= (1 << js_event.number);
+			buttons_state |= (1 << js_event.number);
-	   	else
+		else
-	      		buttons_state &= ~(1 << js_event.number);
+			buttons_state &= ~(1 << js_event.number);
 	}
 
 is much safer since it can't lose sync with the driver. As you would
@@ -144,14 +144,14 @@ all events on the queue (that is, until you get a -1).
 For example,
 
 	while (1) {
-		while (read (fd, &e, sizeof(struct js_event)) > 0) {
+		while (read (fd, &e, sizeof(e)) > 0) {
-	        	process_event (e);
+			process_event (e);
-	   	}
+		}
-	   	/* EAGAIN is returned when the queue is empty */
+		/* EAGAIN is returned when the queue is empty */
-	   	if (errno != EAGAIN) {
+		if (errno != EAGAIN) {
-	      		/* error */
+			/* error */
-	   	}
+		}
-	   	/* do something interesting with processed events */
+		/* do something interesting with processed events */
 	}
 
 One reason for emptying the queue is that if it gets full you'll start
@@ -181,7 +181,7 @@ at a time using the typical read(2) functionality. For that, you would
 replace the read above with something like
 
 	struct js_event mybuffer[0xff];
-	int i = read (fd, mybuffer, sizeof(struct mybuffer));
+	int i = read (fd, mybuffer, sizeof(mybuffer));
 
 In this case, read would return -1 if the queue was empty, or some
 other value in which the number of events read would be i /
@@ -269,9 +269,9 @@ The driver offers backward compatibility, though. Here's a quick summary:
 	struct JS_DATA_TYPE js;
 	while (1) {
 		if (read (fd, &js, JS_RETURN) != JS_RETURN) {
-	      		/* error */
+			/* error */
-	   	}
+		}
-	   	usleep (1000);
+		usleep (1000);
 	}
 
 As you can figure out from the example, the read returns immediately,

Documentation/input/joystick.txt

@@ -116,7 +116,7 @@ your needs:
   For testing the joystick driver functionality, there is the jstest
 program in the utilities package. You run it by typing:
 
-	jstest /dev/js0
+	jstest /dev/input/js0
 
   And it should show a line with the joystick values, which update as you
 move the stick, and press its buttons. The axes should all be zero when the
@@ -136,7 +136,7 @@ joystick should be autocalibrated by the driver automagically. However, with
 some analog joysticks, that either do not use linear resistors, or if you
 want better precision, you can use the jscal program
 
-	jscal -c /dev/js0
+	jscal -c /dev/input/js0
 
  included in the joystick package to set better correction coefficients than
 what the driver would choose itself.
@@ -145,7 +145,7 @@ what the driver would choose itself.
 calibration using the jstest command, and if you do, you then can save the
 correction coefficients into a file
 
-	jscal -p /dev/js0 > /etc/joystick.cal
+	jscal -p /dev/input/js0 > /etc/joystick.cal
 
   And add a line to your rc script executing that file
 
@@ -556,7 +556,7 @@ interface, and "old" for the "0.x" interface. You run it by typing:
 
 5. FAQ
 ~~~~~~
-Q: Running 'jstest /dev/js0' results in "File not found" error. What's the
+Q: Running 'jstest /dev/input/js0' results in "File not found" error. What's the
    cause?
 A: The device files don't exist. Create them (see section 2.2).
 

Documentation/mic/mpssd/mpssd.c

@@ -313,7 +313,7 @@ static struct mic_device_desc *get_device_desc(struct mic_info *mic, int type)
 	int i;
 	void *dp = get_dp(mic, type);
 
-	for (i = mic_aligned_size(struct mic_bootparam); i < PAGE_SIZE;
+	for (i = sizeof(struct mic_bootparam); i < PAGE_SIZE;
 		i += mic_total_desc_size(d)) {
 		d = dp + i;
 
@@ -445,8 +445,8 @@ init_vr(struct mic_info *mic, int fd, int type,
 		__func__, mic->name, vr0->va, vr0->info, vr_size,
 		vring_size(MIC_VRING_ENTRIES, MIC_VIRTIO_RING_ALIGN));
 	mpsslog("magic 0x%x expected 0x%x\n",
-		vr0->info->magic, MIC_MAGIC + type);
+		le32toh(vr0->info->magic), MIC_MAGIC + type);
-	assert(vr0->info->magic == MIC_MAGIC + type);
+	assert(le32toh(vr0->info->magic) == MIC_MAGIC + type);
 	if (vr1) {
 		vr1->va = (struct mic_vring *)
 			&va[MIC_DEVICE_PAGE_END + vr_size];
@@ -458,8 +458,8 @@ init_vr(struct mic_info *mic, int fd, int type,
 			__func__, mic->name, vr1->va, vr1->info, vr_size,
 			vring_size(MIC_VRING_ENTRIES, MIC_VIRTIO_RING_ALIGN));
 		mpsslog("magic 0x%x expected 0x%x\n",
-			vr1->info->magic, MIC_MAGIC + type + 1);
+			le32toh(vr1->info->magic), MIC_MAGIC + type + 1);
-		assert(vr1->info->magic == MIC_MAGIC + type + 1);
+		assert(le32toh(vr1->info->magic) == MIC_MAGIC + type + 1);
 	}
 done:
 	return va;
@@ -520,7 +520,7 @@ static void *
 virtio_net(void *arg)
 {
 	static __u8 vnet_hdr[2][sizeof(struct virtio_net_hdr)];
-	static __u8 vnet_buf[2][MAX_NET_PKT_SIZE] __aligned(64);
+	static __u8 vnet_buf[2][MAX_NET_PKT_SIZE] __attribute__ ((aligned(64)));
 	struct iovec vnet_iov[2][2] = {
 		{ { .iov_base = vnet_hdr[0], .iov_len = sizeof(vnet_hdr[0]) },
 		  { .iov_base = vnet_buf[0], .iov_len = sizeof(vnet_buf[0]) } },
@@ -1412,6 +1412,12 @@ mic_config(void *arg)
 	}
 
 	do {
+		ret = lseek(fd, 0, SEEK_SET);
+		if (ret < 0) {
+			mpsslog("%s: Failed to seek to file start '%s': %s\n",
+				mic->name, pathname, strerror(errno));
+			goto close_error1;
+		}
 		ret = read(fd, value, sizeof(value));
 		if (ret < 0) {
 			mpsslog("%s: Failed to read sysfs entry '%s': %s\n",

Documentation/networking/packet_mmap.txt

@@ -123,6 +123,16 @@ Transmission process is similar to capture as shown below.
 [shutdown]  close() --------> destruction of the transmission socket and
                               deallocation of all associated resources.
 
+Socket creation and destruction is also straight forward, and is done
+the same way as in capturing described in the previous paragraph:
+
+ int fd = socket(PF_PACKET, mode, 0);
+
+The protocol can optionally be 0 in case we only want to transmit
+via this socket, which avoids an expensive call to packet_rcv().
+In this case, you also need to bind(2) the TX_RING with sll_protocol = 0
+set. Otherwise, htons(ETH_P_ALL) or any other protocol, for example.
+
 Binding the socket to your network interface is mandatory (with zero copy) to
 know the header size of frames used in the circular buffer.
 

MAINTAINERS

@@ -893,19 +893,14 @@ F:	arch/arm/include/asm/hardware/dec21285.h
 F:	arch/arm/mach-footbridge/
 
 ARM/FREESCALE IMX / MXC ARM ARCHITECTURE
+M:	Shawn Guo <shawn.guo@linaro.org>
 M:	Sascha Hauer <kernel@pengutronix.de>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
-T:	git git://git.pengutronix.de/git/imx/linux-2.6.git
-F:	arch/arm/mach-imx/
-F:	arch/arm/configs/imx*_defconfig
-
-ARM/FREESCALE IMX6
-M:	Shawn Guo <shawn.guo@linaro.org>
-L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-S:	Maintained
 T:	git git://git.linaro.org/people/shawnguo/linux-2.6.git
-F:	arch/arm/mach-imx/*imx6*
+F:	arch/arm/mach-imx/
+F:	arch/arm/boot/dts/imx*
+F:	arch/arm/configs/imx*_defconfig
 
 ARM/FREESCALE MXS ARM ARCHITECTURE
 M:	Shawn Guo <shawn.guo@linaro.org>
@@ -2138,7 +2133,8 @@ S:	Maintained
 F:	Documentation/zh_CN/
 
 CHIPIDEA USB HIGH SPEED DUAL ROLE CONTROLLER
-M:	Alexander Shishkin <alexander.shishkin@linux.intel.com>
+M:	Peter Chen <Peter.Chen@freescale.com>
+T:	git://github.com/hzpeterchen/linux-usb.git
 L:	linux-usb@vger.kernel.org
 S:	Maintained
 F:	drivers/usb/chipidea/
@@ -4044,6 +4040,14 @@ W:	http://artax.karlin.mff.cuni.cz/~mikulas/vyplody/hpfs/index-e.cgi
 S:	Maintained
 F:	fs/hpfs/
 
+HSI SUBSYSTEM
+M:	Sebastian Reichel <sre@debian.org>
+S:	Maintained
+F:	Documentation/ABI/testing/sysfs-bus-hsi
+F:	drivers/hsi/
+F:	include/linux/hsi/
+F:	include/uapi/linux/hsi/
+
 HSO 3G MODEM DRIVER
 M:	Jan Dumon <j.dumon@option.com>
 W:	http://www.pharscape.org
@@ -4462,10 +4466,8 @@ M:	Bruce Allan <bruce.w.allan@intel.com>
 M:	Carolyn Wyborny <carolyn.wyborny@intel.com>
 M:	Don Skidmore <donald.c.skidmore@intel.com>
 M:	Greg Rose <gregory.v.rose@intel.com>
-M:	Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com>
 M:	Alex Duyck <alexander.h.duyck@intel.com>
 M:	John Ronciak <john.ronciak@intel.com>
-M:	Tushar Dave <tushar.n.dave@intel.com>
 L:	e1000-devel@lists.sourceforge.net
 W:	http://www.intel.com/support/feedback.htm
 W:	http://e1000.sourceforge.net/
@@ -6461,19 +6463,52 @@ F:	drivers/pci/
 F:	include/linux/pci*
 F:	arch/x86/pci/
 
+PCI DRIVER FOR IMX6
+M:	Richard Zhu <r65037@freescale.com>
+M:	Shawn Guo <shawn.guo@linaro.org>
+L:	linux-pci@vger.kernel.org
+L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+S:	Maintained
+F:	drivers/pci/host/*imx6*
+
+PCI DRIVER FOR MVEBU (Marvell Armada 370 and Armada XP SOC support)
+M:	Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+M:	Jason Cooper <jason@lakedaemon.net>
+L:	linux-pci@vger.kernel.org
+L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+S:	Maintained
+F:	drivers/pci/host/*mvebu*
+
 PCI DRIVER FOR NVIDIA TEGRA
 M:	Thierry Reding <thierry.reding@gmail.com>
 L:	linux-tegra@vger.kernel.org
+L:	linux-pci@vger.kernel.org
 S:	Supported
 F:	Documentation/devicetree/bindings/pci/nvidia,tegra20-pcie.txt
 F:	drivers/pci/host/pci-tegra.c
 
+PCI DRIVER FOR RENESAS R-CAR
+M:	Simon Horman <horms@verge.net.au>
+L:	linux-pci@vger.kernel.org
+L:	linux-sh@vger.kernel.org
+S:	Maintained
+F:	drivers/pci/host/*rcar*
+
 PCI DRIVER FOR SAMSUNG EXYNOS
 M:	Jingoo Han <jg1.han@samsung.com>
 L:	linux-pci@vger.kernel.org
+L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+L:	linux-samsung-soc@vger.kernel.org (moderated for non-subscribers)
 S:	Maintained
 F:	drivers/pci/host/pci-exynos.c
 
+PCI DRIVER FOR SYNOPSIS DESIGNWARE
+M:	Mohit Kumar <mohit.kumar@st.com>
+M:	Jingoo Han <jg1.han@samsung.com>
+L:	linux-pci@vger.kernel.org
+S:	Maintained
+F:	drivers/pci/host/*designware*
+
 PCMCIA SUBSYSTEM
 P:	Linux PCMCIA Team
 L:	linux-pcmcia@lists.infradead.org

Makefile

@@ -1,7 +1,7 @@
 VERSION = 3
 PATCHLEVEL = 13
 SUBLEVEL = 0
-EXTRAVERSION = -rc3
+EXTRAVERSION = -rc4
 NAME = One Giant Leap for Frogkind
 
 # *DOCUMENTATION*

arch/alpha/Kconfig

@@ -2,6 +2,7 @@ config ALPHA
 	bool
 	default y
 	select ARCH_MIGHT_HAVE_PC_PARPORT
+	select ARCH_MIGHT_HAVE_PC_SERIO
 	select HAVE_AOUT
 	select HAVE_IDE
 	select HAVE_OPROFILE

arch/arc/Kconfig

@@ -8,6 +8,7 @@
 
 config ARC
 	def_bool y
+	select BUILDTIME_EXTABLE_SORT
 	select CLONE_BACKWARDS
 	# ARC Busybox based initramfs absolutely relies on DEVTMPFS for /dev
 	select DEVTMPFS if !INITRAMFS_SOURCE=""

arch/arc/include/uapi/asm/unistd.h

@@ -8,6 +8,9 @@
 
 /******** no-legacy-syscalls-ABI *******/
 
+#ifndef _UAPI_ASM_ARC_UNISTD_H
+#define _UAPI_ASM_ARC_UNISTD_H
+
 #define __ARCH_WANT_SYS_EXECVE
 #define __ARCH_WANT_SYS_CLONE
 #define __ARCH_WANT_SYS_VFORK
@@ -32,3 +35,5 @@ __SYSCALL(__NR_arc_gettls, sys_arc_gettls)
 /* Generic syscall (fs/filesystems.c - lost in asm-generic/unistd.h */
 #define __NR_sysfs		(__NR_arch_specific_syscall + 3)
 __SYSCALL(__NR_sysfs, sys_sysfs)
+
+#endif

arch/arc/kernel/perf_event.c

@@ -79,9 +79,9 @@ static int arc_pmu_cache_event(u64 config)
 	cache_result	= (config >> 16) & 0xff;
 	if (cache_type >= PERF_COUNT_HW_CACHE_MAX)
 		return -EINVAL;
-	if (cache_type >= PERF_COUNT_HW_CACHE_OP_MAX)
+	if (cache_op >= PERF_COUNT_HW_CACHE_OP_MAX)
 		return -EINVAL;
-	if (cache_type >= PERF_COUNT_HW_CACHE_RESULT_MAX)
+	if (cache_result >= PERF_COUNT_HW_CACHE_RESULT_MAX)
 		return -EINVAL;
 
 	ret = arc_pmu_cache_map[cache_type][cache_op][cache_result];

arch/arm/boot/dts/am3517-evm.dts

@@ -7,11 +7,11 @@
  */
 /dts-v1/;
 
-#include "omap34xx.dtsi"
+#include "am3517.dtsi"
 
 / {
-	model = "TI AM3517 EVM (AM3517/05)";
+	model = "TI AM3517 EVM (AM3517/05 TMDSEVM3517)";
-	compatible = "ti,am3517-evm", "ti,omap3";
+	compatible = "ti,am3517-evm", "ti,am3517", "ti,omap3";
 
 	memory {
 		device_type = "memory";

arch/arm/boot/dts/am3517.dtsi

@@ -0,0 +1,63 @@
+/*
+ * Device Tree Source for am3517 SoC
+ *
+ * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include "omap3.dtsi"
+
+/ {
+	aliases {
+		serial3 = &uart4;
+	};
+
+	ocp {
+		am35x_otg_hs: am35x_otg_hs@5c040000 {
+			compatible = "ti,omap3-musb";
+			ti,hwmods = "am35x_otg_hs";
+			status = "disabled";
+			reg = <0x5c040000 0x1000>;
+			interrupts = <71>;
+			interrupt-names = "mc";
+		};
+
+		davinci_emac: ethernet@0x5c000000 {
+			compatible = "ti,am3517-emac";
+			ti,hwmods = "davinci_emac";
+			status = "disabled";
+			reg = <0x5c000000 0x30000>;
+			interrupts = <67 68 69 70>;
+			ti,davinci-ctrl-reg-offset = <0x10000>;
+			ti,davinci-ctrl-mod-reg-offset = <0>;
+			ti,davinci-ctrl-ram-offset = <0x20000>;
+			ti,davinci-ctrl-ram-size = <0x2000>;
+			ti,davinci-rmii-en = /bits/ 8 <1>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+		};
+
+		davinci_mdio: ethernet@0x5c030000 {
+			compatible = "ti,davinci_mdio";
+			ti,hwmods = "davinci_mdio";
+			status = "disabled";
+			reg = <0x5c030000 0x1000>;
+			bus_freq = <1000000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		uart4: serial@4809e000 {
+			compatible = "ti,omap3-uart";
+			ti,hwmods = "uart4";
+			status = "disabled";
+			reg = <0x4809e000 0x400>;
+			interrupts = <84>;
+			dmas = <&sdma 55 &sdma 54>;
+			dma-names = "tx", "rx";
+			clock-frequency = <48000000>;
+		};
+	};
+};

arch/arm/boot/dts/omap3-n900.dts

@@ -9,7 +9,7 @@
 
 /dts-v1/;
 
-#include "omap34xx.dtsi"
+#include "omap34xx-hs.dtsi"
 
 / {
 	model = "Nokia N900";

arch/arm/boot/dts/omap3-n950-n9.dtsi

@@ -8,7 +8,7 @@
  * published by the Free Software Foundation.
  */
 
-#include "omap36xx.dtsi"
+#include "omap36xx-hs.dtsi"
 
 / {
 	cpus {

arch/arm/boot/dts/omap34xx-hs.dtsi

@@ -0,0 +1,16 @@
+/* Disabled modules for secure omaps */
+
+#include "omap34xx.dtsi"
+
+/* Secure omaps have some devices inaccessible depending on the firmware */
+&aes {
+	status = "disabled";
+};
+
+&sham {
+	status = "disabled";
+};
+
+&timer12 {
+	status = "disabled";
+};

arch/arm/boot/dts/omap36xx-hs.dtsi

@@ -0,0 +1,16 @@
+/* Disabled modules for secure omaps */
+
+#include "omap36xx.dtsi"
+
+/* Secure omaps have some devices inaccessible depending on the firmware */
+&aes {
+	status = "disabled";
+};
+
+&sham {
+	status = "disabled";
+};
+
+&timer12 {
+	status = "disabled";
+};

arch/arm/boot/dts/sun6i-a31.dtsi

@@ -193,7 +193,10 @@
 		pio: pinctrl@01c20800 {
 			compatible = "allwinner,sun6i-a31-pinctrl";
 			reg = <0x01c20800 0x400>;
-			interrupts = <0 11 1>, <0 15 1>, <0 16 1>, <0 17 1>;
+			interrupts = <0 11 4>,
+				     <0 15 4>,
+				     <0 16 4>,
+				     <0 17 4>;
 			clocks = <&apb1_gates 5>;
 			gpio-controller;
 			interrupt-controller;
@@ -212,11 +215,11 @@
 		timer@01c20c00 {
 			compatible = "allwinner,sun4i-timer";
 			reg = <0x01c20c00 0xa0>;
-			interrupts = <0 18 1>,
+			interrupts = <0 18 4>,
-				     <0 19 1>,
+				     <0 19 4>,
-				     <0 20 1>,
+				     <0 20 4>,
-				     <0 21 1>,
+				     <0 21 4>,
-				     <0 22 1>;
+				     <0 22 4>;
 			clocks = <&osc24M>;
 		};
 
@@ -228,7 +231,7 @@
 		uart0: serial@01c28000 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x01c28000 0x400>;
-			interrupts = <0 0 1>;
+			interrupts = <0 0 4>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
 			clocks = <&apb2_gates 16>;
@@ -238,7 +241,7 @@
 		uart1: serial@01c28400 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x01c28400 0x400>;
-			interrupts = <0 1 1>;
+			interrupts = <0 1 4>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
 			clocks = <&apb2_gates 17>;
@@ -248,7 +251,7 @@
 		uart2: serial@01c28800 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x01c28800 0x400>;
-			interrupts = <0 2 1>;
+			interrupts = <0 2 4>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
 			clocks = <&apb2_gates 18>;
@@ -258,7 +261,7 @@
 		uart3: serial@01c28c00 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x01c28c00 0x400>;
-			interrupts = <0 3 1>;
+			interrupts = <0 3 4>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
 			clocks = <&apb2_gates 19>;
@@ -268,7 +271,7 @@
 		uart4: serial@01c29000 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x01c29000 0x400>;
-			interrupts = <0 4 1>;
+			interrupts = <0 4 4>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
 			clocks = <&apb2_gates 20>;
@@ -278,7 +281,7 @@
 		uart5: serial@01c29400 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x01c29400 0x400>;
-			interrupts = <0 5 1>;
+			interrupts = <0 5 4>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
 			clocks = <&apb2_gates 21>;

arch/arm/boot/dts/sun7i-a20.dtsi

@@ -170,7 +170,7 @@
 		emac: ethernet@01c0b000 {
 			compatible = "allwinner,sun4i-emac";
 			reg = <0x01c0b000 0x1000>;
-			interrupts = <0 55 1>;
+			interrupts = <0 55 4>;
 			clocks = <&ahb_gates 17>;
 			status = "disabled";
 		};
@@ -186,7 +186,7 @@
 		pio: pinctrl@01c20800 {
 			compatible = "allwinner,sun7i-a20-pinctrl";
 			reg = <0x01c20800 0x400>;
-			interrupts = <0 28 1>;
+			interrupts = <0 28 4>;
 			clocks = <&apb0_gates 5>;
 			gpio-controller;
 			interrupt-controller;
@@ -251,12 +251,12 @@
 		timer@01c20c00 {
 			compatible = "allwinner,sun4i-timer";
 			reg = <0x01c20c00 0x90>;
-			interrupts = <0 22 1>,
+			interrupts = <0 22 4>,
-				     <0 23 1>,
+				     <0 23 4>,
-				     <0 24 1>,
+				     <0 24 4>,
-				     <0 25 1>,
+				     <0 25 4>,
-				     <0 67 1>,
+				     <0 67 4>,
-				     <0 68 1>;
+				     <0 68 4>;
 			clocks = <&osc24M>;
 		};
 
@@ -273,7 +273,7 @@
 		uart0: serial@01c28000 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x01c28000 0x400>;
-			interrupts = <0 1 1>;
+			interrupts = <0 1 4>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
 			clocks = <&apb1_gates 16>;
@@ -283,7 +283,7 @@
 		uart1: serial@01c28400 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x01c28400 0x400>;
-			interrupts = <0 2 1>;
+			interrupts = <0 2 4>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
 			clocks = <&apb1_gates 17>;
@@ -293,7 +293,7 @@
 		uart2: serial@01c28800 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x01c28800 0x400>;
-			interrupts = <0 3 1>;
+			interrupts = <0 3 4>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
 			clocks = <&apb1_gates 18>;
@@ -303,7 +303,7 @@
 		uart3: serial@01c28c00 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x01c28c00 0x400>;
-			interrupts = <0 4 1>;
+			interrupts = <0 4 4>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
 			clocks = <&apb1_gates 19>;
@@ -313,7 +313,7 @@
 		uart4: serial@01c29000 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x01c29000 0x400>;
-			interrupts = <0 17 1>;
+			interrupts = <0 17 4>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
 			clocks = <&apb1_gates 20>;
@@ -323,7 +323,7 @@
 		uart5: serial@01c29400 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x01c29400 0x400>;
-			interrupts = <0 18 1>;
+			interrupts = <0 18 4>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
 			clocks = <&apb1_gates 21>;
@@ -333,7 +333,7 @@
 		uart6: serial@01c29800 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x01c29800 0x400>;
-			interrupts = <0 19 1>;
+			interrupts = <0 19 4>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
 			clocks = <&apb1_gates 22>;
@@ -343,7 +343,7 @@
 		uart7: serial@01c29c00 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x01c29c00 0x400>;
-			interrupts = <0 20 1>;
+			interrupts = <0 20 4>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
 			clocks = <&apb1_gates 23>;
@@ -353,7 +353,7 @@
 		i2c0: i2c@01c2ac00 {
 			compatible = "allwinner,sun4i-i2c";
 			reg = <0x01c2ac00 0x400>;
-			interrupts = <0 7 1>;
+			interrupts = <0 7 4>;
 			clocks = <&apb1_gates 0>;
 			clock-frequency = <100000>;
 			status = "disabled";
@@ -362,7 +362,7 @@
 		i2c1: i2c@01c2b000 {
 			compatible = "allwinner,sun4i-i2c";
 			reg = <0x01c2b000 0x400>;
-			interrupts = <0 8 1>;
+			interrupts = <0 8 4>;
 			clocks = <&apb1_gates 1>;
 			clock-frequency = <100000>;
 			status = "disabled";
@@ -371,7 +371,7 @@
 		i2c2: i2c@01c2b400 {
 			compatible = "allwinner,sun4i-i2c";
 			reg = <0x01c2b400 0x400>;
-			interrupts = <0 9 1>;
+			interrupts = <0 9 4>;
 			clocks = <&apb1_gates 2>;
 			clock-frequency = <100000>;
 			status = "disabled";
@@ -380,7 +380,7 @@
 		i2c3: i2c@01c2b800 {
 			compatible = "allwinner,sun4i-i2c";
 			reg = <0x01c2b800 0x400>;
-			interrupts = <0 88 1>;
+			interrupts = <0 88 4>;
 			clocks = <&apb1_gates 3>;
 			clock-frequency = <100000>;
 			status = "disabled";
@@ -389,7 +389,7 @@
 		i2c4: i2c@01c2bc00 {
 			compatible = "allwinner,sun4i-i2c";
 			reg = <0x01c2bc00 0x400>;
-			interrupts = <0 89 1>;
+			interrupts = <0 89 4>;
 			clocks = <&apb1_gates 15>;
 			clock-frequency = <100000>;
 			status = "disabled";

arch/arm/include/asm/memory.h

@@ -100,23 +100,19 @@
 #define TASK_UNMAPPED_BASE	UL(0x00000000)
 #endif
 
-#ifndef PHYS_OFFSET
-#define PHYS_OFFSET 		UL(CONFIG_DRAM_BASE)
-#endif
-
 #ifndef END_MEM
 #define END_MEM     		(UL(CONFIG_DRAM_BASE) + CONFIG_DRAM_SIZE)
 #endif
 
 #ifndef PAGE_OFFSET
-#define PAGE_OFFSET		(PHYS_OFFSET)
+#define PAGE_OFFSET		PLAT_PHYS_OFFSET
 #endif
 
 /*
  * The module can be at any place in ram in nommu mode.
  */
 #define MODULES_END		(END_MEM)
-#define MODULES_VADDR		(PHYS_OFFSET)
+#define MODULES_VADDR		PAGE_OFFSET
 
 #define XIP_VIRT_ADDR(physaddr)  (physaddr)
 
@@ -157,6 +153,16 @@
 #endif
 #define ARCH_PGD_MASK		((1 << ARCH_PGD_SHIFT) - 1)
 
+/*
+ * PLAT_PHYS_OFFSET is the offset (from zero) of the start of physical
+ * memory.  This is used for XIP and NoMMU kernels, or by kernels which
+ * have their own mach/memory.h.  Assembly code must always use
+ * PLAT_PHYS_OFFSET and not PHYS_OFFSET.
+ */
+#ifndef PLAT_PHYS_OFFSET
+#define PLAT_PHYS_OFFSET	UL(CONFIG_PHYS_OFFSET)
+#endif
+
 #ifndef __ASSEMBLY__
 
 /*
@@ -239,6 +245,8 @@ static inline unsigned long __phys_to_virt(phys_addr_t x)
 
 #else
 
+#define PHYS_OFFSET	PLAT_PHYS_OFFSET
+
 static inline phys_addr_t __virt_to_phys(unsigned long x)
 {
 	return (phys_addr_t)x - PAGE_OFFSET + PHYS_OFFSET;
@@ -251,17 +259,6 @@ static inline unsigned long __phys_to_virt(phys_addr_t x)
 
 #endif
 #endif
-#endif /* __ASSEMBLY__ */
-
-#ifndef PHYS_OFFSET
-#ifdef PLAT_PHYS_OFFSET
-#define PHYS_OFFSET	PLAT_PHYS_OFFSET
-#else
-#define PHYS_OFFSET	UL(CONFIG_PHYS_OFFSET)
-#endif
-#endif
-
-#ifndef __ASSEMBLY__
 
 /*
  * PFNs are used to describe any physical page; this means

arch/arm/kernel/head-nommu.S

@@ -68,7 +68,7 @@ ENTRY(stext)
 
 #ifdef CONFIG_ARM_MPU
 	/* Calculate the size of a region covering just the kernel */
-	ldr	r5, =PHYS_OFFSET		@ Region start: PHYS_OFFSET
+	ldr	r5, =PLAT_PHYS_OFFSET		@ Region start: PHYS_OFFSET
 	ldr     r6, =(_end)			@ Cover whole kernel
 	sub	r6, r6, r5			@ Minimum size of region to map
 	clz	r6, r6				@ Region size must be 2^N...
@@ -213,7 +213,7 @@ ENTRY(__setup_mpu)
 	set_region_nr r0, #MPU_RAM_REGION
 	isb
 	/* Full access from PL0, PL1, shared for CONFIG_SMP, cacheable */
-	ldr	r0, =PHYS_OFFSET		@ RAM starts at PHYS_OFFSET
+	ldr	r0, =PLAT_PHYS_OFFSET		@ RAM starts at PHYS_OFFSET
 	ldr	r5,=(MPU_AP_PL1RW_PL0RW | MPU_RGN_NORMAL)
 
 	setup_region r0, r5, r6, MPU_DATA_SIDE	@ PHYS_OFFSET, shared, enabled

arch/arm/kernel/head.S

@@ -110,7 +110,7 @@ ENTRY(stext)
 	sub	r4, r3, r4			@ (PHYS_OFFSET - PAGE_OFFSET)
 	add	r8, r8, r4			@ PHYS_OFFSET
 #else
-	ldr	r8, =PHYS_OFFSET		@ always constant in this case
+	ldr	r8, =PLAT_PHYS_OFFSET		@ always constant in this case
 #endif
 
 	/*

arch/arm/kernel/process.c

@@ -404,6 +404,7 @@ EXPORT_SYMBOL(dump_fpu);
 unsigned long get_wchan(struct task_struct *p)
 {
 	struct stackframe frame;
+	unsigned long stack_page;
 	int count = 0;
 	if (!p || p == current || p->state == TASK_RUNNING)
 		return 0;
@@ -412,9 +413,11 @@ unsigned long get_wchan(struct task_struct *p)
 	frame.sp = thread_saved_sp(p);
 	frame.lr = 0;			/* recovered from the stack */
 	frame.pc = thread_saved_pc(p);
+	stack_page = (unsigned long)task_stack_page(p);
 	do {
-		int ret = unwind_frame(&frame);
+		if (frame.sp < stack_page ||
-		if (ret < 0)
+		    frame.sp >= stack_page + THREAD_SIZE ||
+		    unwind_frame(&frame) < 0)
 			return 0;
 		if (!in_sched_functions(frame.pc))
 			return frame.pc;

arch/arm/kernel/setup.c

@@ -873,8 +873,6 @@ void __init setup_arch(char **cmdline_p)
 	machine_desc = mdesc;
 	machine_name = mdesc->name;
 
-	setup_dma_zone(mdesc);
-
 	if (mdesc->reboot_mode != REBOOT_HARD)
 		reboot_mode = mdesc->reboot_mode;
 
@@ -892,6 +890,7 @@ void __init setup_arch(char **cmdline_p)
 	sort(&meminfo.bank, meminfo.nr_banks, sizeof(meminfo.bank[0]), meminfo_cmp, NULL);
 
 	early_paging_init(mdesc, lookup_processor_type(read_cpuid_id()));
+	setup_dma_zone(mdesc);
 	sanity_check_meminfo();
 	arm_memblock_init(&meminfo, mdesc);
 

arch/arm/kernel/stacktrace.c

@@ -31,7 +31,7 @@ int notrace unwind_frame(struct stackframe *frame)
 	high = ALIGN(low, THREAD_SIZE);
 
 	/* check current frame pointer is within bounds */
-	if (fp < (low + 12) || fp + 4 >= high)
+	if (fp < low + 12 || fp > high - 4)
 		return -EINVAL;
 
 	/* restore the registers from the stack frame */

arch/arm/kernel/traps.c

@@ -509,9 +509,10 @@ static inline int
 __do_cache_op(unsigned long start, unsigned long end)
 {
 	int ret;
-	unsigned long chunk = PAGE_SIZE;
 
 	do {
+		unsigned long chunk = min(PAGE_SIZE, end - start);
+
 		if (signal_pending(current)) {
 			struct thread_info *ti = current_thread_info();
 

arch/arm/mach-davinci/devices-da8xx.c

@@ -487,7 +487,7 @@ int __init da8xx_register_emac(void)
 
 static struct resource da830_mcasp1_resources[] = {
 	{
-		.name	= "mcasp1",
+		.name	= "mpu",
 		.start	= DAVINCI_DA830_MCASP1_REG_BASE,
 		.end	= DAVINCI_DA830_MCASP1_REG_BASE + (SZ_1K * 12) - 1,
 		.flags	= IORESOURCE_MEM,
@@ -515,7 +515,7 @@ static struct platform_device da830_mcasp1_device = {
 
 static struct resource da850_mcasp_resources[] = {
 	{
-		.name	= "mcasp",
+		.name	= "mpu",
 		.start	= DAVINCI_DA8XX_MCASP0_REG_BASE,
 		.end	= DAVINCI_DA8XX_MCASP0_REG_BASE + (SZ_1K * 12) - 1,
 		.flags	= IORESOURCE_MEM,

arch/arm/mach-davinci/dm355.c

@@ -641,6 +641,7 @@ static struct platform_device dm355_edma_device = {
 
 static struct resource dm355_asp1_resources[] = {
 	{
+		.name	= "mpu",
 		.start	= DAVINCI_ASP1_BASE,
 		.end	= DAVINCI_ASP1_BASE + SZ_8K - 1,
 		.flags	= IORESOURCE_MEM,
@@ -906,7 +907,7 @@ static struct davinci_gpio_platform_data dm355_gpio_platform_data = {
 int __init dm355_gpio_register(void)
 {
 	return davinci_gpio_register(dm355_gpio_resources,
-				     sizeof(dm355_gpio_resources),
+				     ARRAY_SIZE(dm355_gpio_resources),
 				     &dm355_gpio_platform_data);
 }
 /*----------------------------------------------------------------------*/

arch/arm/mach-davinci/dm365.c

@@ -720,7 +720,7 @@ static struct davinci_gpio_platform_data dm365_gpio_platform_data = {
 int __init dm365_gpio_register(void)
 {
 	return davinci_gpio_register(dm365_gpio_resources,
-				     sizeof(dm365_gpio_resources),
+				     ARRAY_SIZE(dm365_gpio_resources),
 				     &dm365_gpio_platform_data);
 }
 
@@ -942,6 +942,7 @@ static struct platform_device dm365_edma_device = {
 
 static struct resource dm365_asp_resources[] = {
 	{
+		.name	= "mpu",
 		.start	= DAVINCI_DM365_ASP0_BASE,
 		.end	= DAVINCI_DM365_ASP0_BASE + SZ_8K - 1,
 		.flags	= IORESOURCE_MEM,

arch/arm/mach-davinci/dm644x.c

@@ -572,6 +572,7 @@ static struct platform_device dm644x_edma_device = {
 /* DM6446 EVM uses ASP0; line-out is a pair of RCA jacks */
 static struct resource dm644x_asp_resources[] = {
 	{
+		.name	= "mpu",
 		.start	= DAVINCI_ASP0_BASE,
 		.end	= DAVINCI_ASP0_BASE + SZ_8K - 1,
 		.flags	= IORESOURCE_MEM,
@@ -792,7 +793,7 @@ static struct davinci_gpio_platform_data dm644_gpio_platform_data = {
 int __init dm644x_gpio_register(void)
 {
 	return davinci_gpio_register(dm644_gpio_resources,
-				     sizeof(dm644_gpio_resources),
+				     ARRAY_SIZE(dm644_gpio_resources),
 				     &dm644_gpio_platform_data);
 }
 /*----------------------------------------------------------------------*/

arch/arm/mach-davinci/dm646x.c

@@ -621,7 +621,7 @@ static struct platform_device dm646x_edma_device = {
 
 static struct resource dm646x_mcasp0_resources[] = {
 	{
-		.name	= "mcasp0",
+		.name	= "mpu",
 		.start 	= DAVINCI_DM646X_MCASP0_REG_BASE,
 		.end 	= DAVINCI_DM646X_MCASP0_REG_BASE + (SZ_1K << 1) - 1,
 		.flags 	= IORESOURCE_MEM,
@@ -641,7 +641,7 @@ static struct resource dm646x_mcasp0_resources[] = {
 
 static struct resource dm646x_mcasp1_resources[] = {
 	{
-		.name	= "mcasp1",
+		.name	= "mpu",
 		.start	= DAVINCI_DM646X_MCASP1_REG_BASE,
 		.end	= DAVINCI_DM646X_MCASP1_REG_BASE + (SZ_1K << 1) - 1,
 		.flags	= IORESOURCE_MEM,
@@ -769,7 +769,7 @@ static struct davinci_gpio_platform_data dm646x_gpio_platform_data = {
 int __init dm646x_gpio_register(void)
 {
 	return davinci_gpio_register(dm646x_gpio_resources,
-				     sizeof(dm646x_gpio_resources),
+				     ARRAY_SIZE(dm646x_gpio_resources),
 				     &dm646x_gpio_platform_data);
 }
 /*----------------------------------------------------------------------*/

arch/arm/mach-footbridge/Kconfig

@@ -85,6 +85,7 @@ config FOOTBRIDGE
 # Footbridge in host mode
 config FOOTBRIDGE_HOST
 	bool
+	select ARCH_MIGHT_HAVE_PC_SERIO
 
 # Footbridge in addin mode
 config FOOTBRIDGE_ADDIN

arch/arm/mach-highbank/highbank.c

@@ -17,12 +17,15 @@
 #include <linux/clkdev.h>
 #include <linux/clocksource.h>
 #include <linux/dma-mapping.h>
+#include <linux/input.h>
 #include <linux/io.h>
 #include <linux/irqchip.h>
+#include <linux/mailbox.h>
 #include <linux/of.h>
 #include <linux/of_irq.h>
 #include <linux/of_platform.h>
 #include <linux/of_address.h>
+#include <linux/reboot.h>
 #include <linux/amba/bus.h>
 #include <linux/platform_device.h>
 
@@ -130,6 +133,24 @@ static struct platform_device highbank_cpuidle_device = {
 	.name = "cpuidle-calxeda",
 };
 
+static int hb_keys_notifier(struct notifier_block *nb, unsigned long event, void *data)
+{
+	u32 key = *(u32 *)data;
+
+	if (event != 0x1000)
+		return 0;
+
+	if (key == KEY_POWER)
+		orderly_poweroff(false);
+	else if (key == 0xffff)
+		ctrl_alt_del();
+
+	return 0;
+}
+static struct notifier_block hb_keys_nb = {
+	.notifier_call = hb_keys_notifier,
+};
+
 static void __init highbank_init(void)
 {
 	struct device_node *np;
@@ -145,6 +166,8 @@ static void __init highbank_init(void)
 	bus_register_notifier(&platform_bus_type, &highbank_platform_nb);
 	bus_register_notifier(&amba_bustype, &highbank_amba_nb);
 
+	pl320_ipc_register_notifier(&hb_keys_nb);
+
 	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
 
 	if (psci_ops.cpu_suspend)

arch/arm/mach-imx/mach-cpuimx35.c

@@ -53,7 +53,7 @@ static const struct imxi2c_platform_data
 };
 
 #define TSC2007_IRQGPIO		IMX_GPIO_NR(3, 2)
-static int tsc2007_get_pendown_state(void)
+static int tsc2007_get_pendown_state(struct device *dev)
 {
 	return !gpio_get_value(TSC2007_IRQGPIO);
 }

arch/arm/mach-imx/mach-cpuimx51sd.c

@@ -121,7 +121,7 @@ static const struct imxuart_platform_data uart_pdata __initconst = {
 	.flags = IMXUART_HAVE_RTSCTS,
 };
 
-static int tsc2007_get_pendown_state(void)
+static int tsc2007_get_pendown_state(struct device *dev)
 {
 	if (mx51_revision() < IMX_CHIP_REVISION_3_0)
 		return !gpio_get_value(TSC2007_IRQGPIO_REV2);

arch/arm/mach-omap2/board-generic.c

@@ -131,6 +131,24 @@ DT_MACHINE_START(OMAP3_GP_DT, "Generic OMAP3-GP (Flattened Device Tree)")
 	.dt_compat	= omap3_gp_boards_compat,
 	.restart	= omap3xxx_restart,
 MACHINE_END
+
+static const char *am3517_boards_compat[] __initdata = {
+	"ti,am3517",
+	NULL,
+};
+
+DT_MACHINE_START(AM3517_DT, "Generic AM3517 (Flattened Device Tree)")
+	.reserve	= omap_reserve,
+	.map_io		= omap3_map_io,
+	.init_early	= am35xx_init_early,
+	.init_irq	= omap_intc_of_init,
+	.handle_irq	= omap3_intc_handle_irq,
+	.init_machine	= omap_generic_init,
+	.init_late	= omap3_init_late,
+	.init_time	= omap3_gptimer_timer_init,
+	.dt_compat	= am3517_boards_compat,
+	.restart	= omap3xxx_restart,
+MACHINE_END
 #endif
 
 #ifdef CONFIG_SOC_AM33XX

arch/arm/mach-omap2/omap_device.c

@@ -183,6 +183,10 @@ static int omap_device_build_from_dt(struct platform_device *pdev)
 odbfd_exit1:
 	kfree(hwmods);
 odbfd_exit:
+	/* if data/we are at fault.. load up a fail handler */
+	if (ret)
+		pdev->dev.pm_domain = &omap_device_fail_pm_domain;
+
 	return ret;
 }
 
@@ -604,6 +608,19 @@ static int _od_runtime_resume(struct device *dev)
 
 	return pm_generic_runtime_resume(dev);
 }
+
+static int _od_fail_runtime_suspend(struct device *dev)
+{
+	dev_warn(dev, "%s: FIXME: missing hwmod/omap_dev info\n", __func__);
+	return -ENODEV;
+}
+
+static int _od_fail_runtime_resume(struct device *dev)
+{
+	dev_warn(dev, "%s: FIXME: missing hwmod/omap_dev info\n", __func__);
+	return -ENODEV;
+}
+
 #endif
 
 #ifdef CONFIG_SUSPEND
@@ -657,6 +674,13 @@ static int _od_resume_noirq(struct device *dev)
 #define _od_resume_noirq NULL
 #endif
 
+struct dev_pm_domain omap_device_fail_pm_domain = {
+	.ops = {
+		SET_RUNTIME_PM_OPS(_od_fail_runtime_suspend,
+				   _od_fail_runtime_resume, NULL)
+	}
+};
+
 struct dev_pm_domain omap_device_pm_domain = {
 	.ops = {
 		SET_RUNTIME_PM_OPS(_od_runtime_suspend, _od_runtime_resume,

arch/arm/mach-omap2/omap_device.h

@@ -29,6 +29,7 @@
 #include "omap_hwmod.h"
 
 extern struct dev_pm_domain omap_device_pm_domain;
+extern struct dev_pm_domain omap_device_fail_pm_domain;
 
 /* omap_device._state values */
 #define OMAP_DEVICE_STATE_UNKNOWN	0

arch/arm/mach-omap2/omap_hwmod.c

@@ -399,7 +399,7 @@ static int _set_clockactivity(struct omap_hwmod *oh, u8 clockact, u32 *v)
 }
 
 /**
- * _set_softreset: set OCP_SYSCONFIG.CLOCKACTIVITY bits in @v
+ * _set_softreset: set OCP_SYSCONFIG.SOFTRESET bit in @v
  * @oh: struct omap_hwmod *
  * @v: pointer to register contents to modify
  *
@@ -426,6 +426,36 @@ static int _set_softreset(struct omap_hwmod *oh, u32 *v)
 	return 0;
 }
 
+/**
+ * _clear_softreset: clear OCP_SYSCONFIG.SOFTRESET bit in @v
+ * @oh: struct omap_hwmod *
+ * @v: pointer to register contents to modify
+ *
+ * Clear the SOFTRESET bit in @v for hwmod @oh.  Returns -EINVAL upon
+ * error or 0 upon success.
+ */
+static int _clear_softreset(struct omap_hwmod *oh, u32 *v)
+{
+	u32 softrst_mask;
+
+	if (!oh->class->sysc ||
+	    !(oh->class->sysc->sysc_flags & SYSC_HAS_SOFTRESET))
+		return -EINVAL;
+
+	if (!oh->class->sysc->sysc_fields) {
+		WARN(1,
+		     "omap_hwmod: %s: sysc_fields absent for sysconfig class\n",
+		     oh->name);
+		return -EINVAL;
+	}
+
+	softrst_mask = (0x1 << oh->class->sysc->sysc_fields->srst_shift);
+
+	*v &= ~softrst_mask;
+
+	return 0;
+}
+
 /**
  * _wait_softreset_complete - wait for an OCP softreset to complete
  * @oh: struct omap_hwmod * to wait on
@@ -785,6 +815,7 @@ static int _init_interface_clks(struct omap_hwmod *oh)
 			pr_warning("omap_hwmod: %s: cannot clk_get interface_clk %s\n",
 				   oh->name, os->clk);
 			ret = -EINVAL;
+			continue;
 		}
 		os->_clk = c;
 		/*
@@ -821,6 +852,7 @@ static int _init_opt_clks(struct omap_hwmod *oh)
 			pr_warning("omap_hwmod: %s: cannot clk_get opt_clk %s\n",
 				   oh->name, oc->clk);
 			ret = -EINVAL;
+			continue;
 		}
 		oc->_clk = c;
 		/*
@@ -1911,6 +1943,12 @@ static int _ocp_softreset(struct omap_hwmod *oh)
 	ret = _set_softreset(oh, &v);
 	if (ret)
 		goto dis_opt_clks;
+
+	_write_sysconfig(v, oh);
+	ret = _clear_softreset(oh, &v);
+	if (ret)
+		goto dis_opt_clks;
+
 	_write_sysconfig(v, oh);
 
 	if (oh->class->sysc->srst_udelay)
@@ -2326,38 +2364,80 @@ static int _shutdown(struct omap_hwmod *oh)
 	return 0;
 }
 
+static int of_dev_find_hwmod(struct device_node *np,
+			     struct omap_hwmod *oh)
+{
+	int count, i, res;
+	const char *p;
+
+	count = of_property_count_strings(np, "ti,hwmods");
+	if (count < 1)
+		return -ENODEV;
+
+	for (i = 0; i < count; i++) {
+		res = of_property_read_string_index(np, "ti,hwmods",
+						    i, &p);
+		if (res)
+			continue;
+		if (!strcmp(p, oh->name)) {
+			pr_debug("omap_hwmod: dt %s[%i] uses hwmod %s\n",
+				 np->name, i, oh->name);
+			return i;
+		}
+	}
+
+	return -ENODEV;
+}
+
 /**
  * of_dev_hwmod_lookup - look up needed hwmod from dt blob
  * @np: struct device_node *
  * @oh: struct omap_hwmod *
+ * @index: index of the entry found
+ * @found: struct device_node * found or NULL
  *
  * Parse the dt blob and find out needed hwmod. Recursive function is
  * implemented to take care hierarchical dt blob parsing.
- * Return: The device node on success or NULL on failure.
+ * Return: Returns 0 on success, -ENODEV when not found.
  */
-static struct device_node *of_dev_hwmod_lookup(struct device_node *np,
+static int of_dev_hwmod_lookup(struct device_node *np,
-						struct omap_hwmod *oh)
+			       struct omap_hwmod *oh,
+			       int *index,
+			       struct device_node **found)
 {
-	struct device_node *np0 = NULL, *np1 = NULL;
+	struct device_node *np0 = NULL;
-	const char *p;
+	int res;
+
+	res = of_dev_find_hwmod(np, oh);
+	if (res >= 0) {
+		*found = np;
+		*index = res;
+		return 0;
+	}
 
 	for_each_child_of_node(np, np0) {
-		if (of_find_property(np0, "ti,hwmods", NULL)) {
+		struct device_node *fc;
-			p = of_get_property(np0, "ti,hwmods", NULL);
+		int i;
-			if (!strcmp(p, oh->name))
+
-				return np0;
+		res = of_dev_hwmod_lookup(np0, oh, &i, &fc);
-			np1 = of_dev_hwmod_lookup(np0, oh);
+		if (res == 0) {
-			if (np1)
+			*found = fc;
-				return np1;
+			*index = i;
+			return 0;
 		}
 	}
-	return NULL;
+
+	*found = NULL;
+	*index = 0;
+
+	return -ENODEV;
 }
 
 /**
  * _init_mpu_rt_base - populate the virtual address for a hwmod
  * @oh: struct omap_hwmod * to locate the virtual address
  * @data: (unused, caller should pass NULL)
+ * @index: index of the reg entry iospace in device tree
  * @np: struct device_node * of the IP block's device node in the DT data
  *
  * Cache the virtual address used by the MPU to access this IP block's
@@ -2368,7 +2448,7 @@ static struct device_node *of_dev_hwmod_lookup(struct device_node *np,
  * -ENXIO on absent or invalid register target address space.
  */
 static int __init _init_mpu_rt_base(struct omap_hwmod *oh, void *data,
-				    struct device_node *np)
+				    int index, struct device_node *np)
 {
 	struct omap_hwmod_addr_space *mem;
 	void __iomem *va_start = NULL;
@@ -2390,13 +2470,17 @@ static int __init _init_mpu_rt_base(struct omap_hwmod *oh, void *data,
 		if (!np)
 			return -ENXIO;
 
-		va_start = of_iomap(np, oh->mpu_rt_idx);
+		va_start = of_iomap(np, index + oh->mpu_rt_idx);
 	} else {
 		va_start = ioremap(mem->pa_start, mem->pa_end - mem->pa_start);
 	}
 
 	if (!va_start) {
-		pr_err("omap_hwmod: %s: Could not ioremap\n", oh->name);
+		if (mem)
+			pr_err("omap_hwmod: %s: Could not ioremap\n", oh->name);
+		else
+			pr_err("omap_hwmod: %s: Missing dt reg%i for %s\n",
+			       oh->name, index, np->full_name);
 		return -ENXIO;
 	}
 
@@ -2422,17 +2506,29 @@ static int __init _init_mpu_rt_base(struct omap_hwmod *oh, void *data,
  */
 static int __init _init(struct omap_hwmod *oh, void *data)
 {
-	int r;
+	int r, index;
 	struct device_node *np = NULL;
 
 	if (oh->_state != _HWMOD_STATE_REGISTERED)
 		return 0;
 
-	if (of_have_populated_dt())
+	if (of_have_populated_dt()) {
-		np = of_dev_hwmod_lookup(of_find_node_by_name(NULL, "ocp"), oh);
+		struct device_node *bus;
+
+		bus = of_find_node_by_name(NULL, "ocp");
+		if (!bus)
+			return -ENODEV;
+
+		r = of_dev_hwmod_lookup(bus, oh, &index, &np);
+		if (r)
+			pr_debug("omap_hwmod: %s missing dt data\n", oh->name);
+		else if (np && index)
+			pr_warn("omap_hwmod: %s using broken dt data from %s\n",
+				oh->name, np->name);
+	}
 
 	if (oh->class->sysc) {
-		r = _init_mpu_rt_base(oh, NULL, np);
+		r = _init_mpu_rt_base(oh, NULL, index, np);
 		if (r < 0) {
 			WARN(1, "omap_hwmod: %s: doesn't have mpu register target base\n",
 			     oh->name);
@@ -3169,6 +3265,11 @@ int omap_hwmod_softreset(struct omap_hwmod *oh)
 		goto error;
 	_write_sysconfig(v, oh);
 
+	ret = _clear_softreset(oh, &v);
+	if (ret)
+		goto error;
+	_write_sysconfig(v, oh);
+
 error:
 	return ret;
 }

arch/arm/mach-omap2/omap_hwmod_3xxx_data.c

@@ -1943,7 +1943,8 @@ static struct omap_hwmod_class_sysconfig omap3xxx_usb_host_hs_sysc = {
 	.syss_offs	= 0x0014,
 	.sysc_flags	= (SYSC_HAS_MIDLEMODE | SYSC_HAS_CLOCKACTIVITY |
 			   SYSC_HAS_SIDLEMODE | SYSC_HAS_ENAWAKEUP |
-			   SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE),
+			   SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE |
+			   SYSS_HAS_RESET_STATUS),
 	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
 			   MSTANDBY_FORCE | MSTANDBY_NO | MSTANDBY_SMART),
 	.sysc_fields	= &omap_hwmod_sysc_type1,
@@ -2021,15 +2022,7 @@ static struct omap_hwmod omap3xxx_usb_host_hs_hwmod = {
 	 * hence HWMOD_SWSUP_MSTANDBY
 	 */
 
-	/*
+	.flags		= HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY,
-	 * During system boot; If the hwmod framework resets the module
-	 * the module will have smart idle settings; which can lead to deadlock
-	 * (above Errata Id:i660); so, dont reset the module during boot;
-	 * Use HWMOD_INIT_NO_RESET.
-	 */
-
-	.flags		= HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY |
-			  HWMOD_INIT_NO_RESET,
 };
 
 /*

arch/arm/mach-omap2/omap_hwmod_44xx_data.c

@@ -2937,7 +2937,7 @@ static struct omap_hwmod_class_sysconfig omap44xx_usb_host_hs_sysc = {
 	.sysc_offs	= 0x0010,
 	.syss_offs	= 0x0014,
 	.sysc_flags	= (SYSC_HAS_MIDLEMODE | SYSC_HAS_SIDLEMODE |
-			   SYSC_HAS_SOFTRESET),
+			   SYSC_HAS_SOFTRESET | SYSC_HAS_RESET_STATUS),
 	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
 			   SIDLE_SMART_WKUP | MSTANDBY_FORCE | MSTANDBY_NO |
 			   MSTANDBY_SMART | MSTANDBY_SMART_WKUP),
@@ -3001,15 +3001,7 @@ static struct omap_hwmod omap44xx_usb_host_hs_hwmod = {
 	 * hence HWMOD_SWSUP_MSTANDBY
 	 */
 
-	/*
+	.flags		= HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY,
-	 * During system boot; If the hwmod framework resets the module
-	 * the module will have smart idle settings; which can lead to deadlock
-	 * (above Errata Id:i660); so, dont reset the module during boot;
-	 * Use HWMOD_INIT_NO_RESET.
-	 */
-
-	.flags		= HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY |
-			  HWMOD_INIT_NO_RESET,
 };
 
 /*

arch/arm/mach-omap2/omap_hwmod_54xx_data.c

@@ -1544,7 +1544,8 @@ static struct omap_hwmod_class_sysconfig omap54xx_usb_host_hs_sysc = {
 	.rev_offs	= 0x0000,
 	.sysc_offs	= 0x0010,
 	.sysc_flags	= (SYSC_HAS_MIDLEMODE | SYSC_HAS_RESET_STATUS |
-			   SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET),
+			   SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET |
+			   SYSC_HAS_RESET_STATUS),
 	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
 			   SIDLE_SMART_WKUP | MSTANDBY_FORCE | MSTANDBY_NO |
 			   MSTANDBY_SMART | MSTANDBY_SMART_WKUP),
@@ -1598,15 +1599,7 @@ static struct omap_hwmod omap54xx_usb_host_hs_hwmod = {
 	 * hence HWMOD_SWSUP_MSTANDBY
 	 */
 
-	/*
+	.flags		= HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY,
-	 * During system boot; If the hwmod framework resets the module
-	 * the module will have smart idle settings; which can lead to deadlock
-	 * (above Errata Id:i660); so, dont reset the module during boot;
-	 * Use HWMOD_INIT_NO_RESET.
-	 */
-
-	.flags		= HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY |
-			  HWMOD_INIT_NO_RESET,
 	.main_clk	= "l3init_60m_fclk",
 	.prcm = {
 		.omap4 = {

arch/arm/mach-pxa/reset.c

@@ -13,6 +13,7 @@
 
 #include <mach/regs-ost.h>
 #include <mach/reset.h>
+#include <mach/smemc.h>
 
 unsigned int reset_status;
 EXPORT_SYMBOL(reset_status);
@@ -81,6 +82,12 @@ static void do_hw_reset(void)
 	writel_relaxed(OSSR_M3, OSSR);
 	/* ... in 100 ms */
 	writel_relaxed(readl_relaxed(OSCR) + 368640, OSMR3);
+	/*
+	 * SDRAM hangs on watchdog reset on Marvell PXA270 (erratum 71)
+	 * we put SDRAM into self-refresh to prevent that
+	 */
+	while (1)
+		writel_relaxed(MDREFR_SLFRSH, MDREFR);
 }
 
 void pxa_restart(enum reboot_mode mode, const char *cmd)
@@ -104,4 +111,3 @@ void pxa_restart(enum reboot_mode mode, const char *cmd)
 		break;
 	}
 }
-

arch/arm/mach-pxa/tosa.c

@@ -425,57 +425,57 @@ static struct platform_device tosa_power_device = {
  * Tosa Keyboard
  */
 static const uint32_t tosakbd_keymap[] = {
-	KEY(0, 2, KEY_W),
+	KEY(0, 1, KEY_W),
-	KEY(0, 6, KEY_K),
+	KEY(0, 5, KEY_K),
-	KEY(0, 7, KEY_BACKSPACE),
+	KEY(0, 6, KEY_BACKSPACE),
-	KEY(0, 8, KEY_P),
+	KEY(0, 7, KEY_P),
-	KEY(1, 1, KEY_Q),
+	KEY(1, 0, KEY_Q),
-	KEY(1, 2, KEY_E),
+	KEY(1, 1, KEY_E),
-	KEY(1, 3, KEY_T),
+	KEY(1, 2, KEY_T),
-	KEY(1, 4, KEY_Y),
+	KEY(1, 3, KEY_Y),
-	KEY(1, 6, KEY_O),
+	KEY(1, 5, KEY_O),
-	KEY(1, 7, KEY_I),
+	KEY(1, 6, KEY_I),
-	KEY(1, 8, KEY_COMMA),
+	KEY(1, 7, KEY_COMMA),
-	KEY(2, 1, KEY_A),
+	KEY(2, 0, KEY_A),
-	KEY(2, 2, KEY_D),
+	KEY(2, 1, KEY_D),
-	KEY(2, 3, KEY_G),
+	KEY(2, 2, KEY_G),
-	KEY(2, 4, KEY_U),
+	KEY(2, 3, KEY_U),
-	KEY(2, 6, KEY_L),
+	KEY(2, 5, KEY_L),
-	KEY(2, 7, KEY_ENTER),
+	KEY(2, 6, KEY_ENTER),
-	KEY(2, 8, KEY_DOT),
+	KEY(2, 7, KEY_DOT),
-	KEY(3, 1, KEY_Z),
+	KEY(3, 0, KEY_Z),
-	KEY(3, 2, KEY_C),
+	KEY(3, 1, KEY_C),
-	KEY(3, 3, KEY_V),
+	KEY(3, 2, KEY_V),
-	KEY(3, 4, KEY_J),
+	KEY(3, 3, KEY_J),
-	KEY(3, 5, TOSA_KEY_ADDRESSBOOK),
+	KEY(3, 4, TOSA_KEY_ADDRESSBOOK),
-	KEY(3, 6, TOSA_KEY_CANCEL),
+	KEY(3, 5, TOSA_KEY_CANCEL),
-	KEY(3, 7, TOSA_KEY_CENTER),
+	KEY(3, 6, TOSA_KEY_CENTER),
-	KEY(3, 8, TOSA_KEY_OK),
+	KEY(3, 7, TOSA_KEY_OK),
-	KEY(3, 9, KEY_LEFTSHIFT),
+	KEY(3, 8, KEY_LEFTSHIFT),
-	KEY(4, 1, KEY_S),
+	KEY(4, 0, KEY_S),
-	KEY(4, 2, KEY_R),
+	KEY(4, 1, KEY_R),
-	KEY(4, 3, KEY_B),
+	KEY(4, 2, KEY_B),
-	KEY(4, 4, KEY_N),
+	KEY(4, 3, KEY_N),
-	KEY(4, 5, TOSA_KEY_CALENDAR),
+	KEY(4, 4, TOSA_KEY_CALENDAR),
-	KEY(4, 6, TOSA_KEY_HOMEPAGE),
+	KEY(4, 5, TOSA_KEY_HOMEPAGE),
-	KEY(4, 7, KEY_LEFTCTRL),
+	KEY(4, 6, KEY_LEFTCTRL),
-	KEY(4, 8, TOSA_KEY_LIGHT),
+	KEY(4, 7, TOSA_KEY_LIGHT),
-	KEY(4, 10, KEY_RIGHTSHIFT),
+	KEY(4, 9, KEY_RIGHTSHIFT),
-	KEY(5, 1, KEY_TAB),
+	KEY(5, 0, KEY_TAB),
-	KEY(5, 2, KEY_SLASH),
+	KEY(5, 1, KEY_SLASH),
-	KEY(5, 3, KEY_H),
+	KEY(5, 2, KEY_H),
-	KEY(5, 4, KEY_M),
+	KEY(5, 3, KEY_M),
-	KEY(5, 5, TOSA_KEY_MENU),
+	KEY(5, 4, TOSA_KEY_MENU),
-	KEY(5, 7, KEY_UP),
+	KEY(5, 6, KEY_UP),
-	KEY(5, 11, TOSA_KEY_FN),
+	KEY(5, 10, TOSA_KEY_FN),
-	KEY(6, 1, KEY_X),
+	KEY(6, 0, KEY_X),
-	KEY(6, 2, KEY_F),
+	KEY(6, 1, KEY_F),
-	KEY(6, 3, KEY_SPACE),
+	KEY(6, 2, KEY_SPACE),
-	KEY(6, 4, KEY_APOSTROPHE),
+	KEY(6, 3, KEY_APOSTROPHE),
-	KEY(6, 5, TOSA_KEY_MAIL),
+	KEY(6, 4, TOSA_KEY_MAIL),
-	KEY(6, 6, KEY_LEFT),
+	KEY(6, 5, KEY_LEFT),
-	KEY(6, 7, KEY_DOWN),
+	KEY(6, 6, KEY_DOWN),
-	KEY(6, 8, KEY_RIGHT),
+	KEY(6, 7, KEY_RIGHT),
 };
 
 static struct matrix_keymap_data tosakbd_keymap_data = {

arch/arm/mach-tegra/fuse.c

@@ -198,10 +198,12 @@ void __init tegra_init_fuse(void)
 	switch (tegra_chip_id) {
 	case TEGRA20:
 		tegra20_fuse_init_randomness();
+		break;
 	case TEGRA30:
 	case TEGRA114:
 	default:
 		tegra30_fuse_init_randomness();
+		break;
 	}
 
 	pr_info("Tegra Revision: %s SKU: %d CPU Process: %d Core Process: %d\n",

arch/arm/mm/dma-mapping.c

@@ -158,13 +158,49 @@ struct dma_map_ops arm_coherent_dma_ops = {
 };
 EXPORT_SYMBOL(arm_coherent_dma_ops);
 
+static int __dma_supported(struct device *dev, u64 mask, bool warn)
+{
+	unsigned long max_dma_pfn;
+
+	/*
+	 * If the mask allows for more memory than we can address,
+	 * and we actually have that much memory, then we must
+	 * indicate that DMA to this device is not supported.
+	 */
+	if (sizeof(mask) != sizeof(dma_addr_t) &&
+	    mask > (dma_addr_t)~0 &&
+	    dma_to_pfn(dev, ~0) < max_pfn) {
+		if (warn) {
+			dev_warn(dev, "Coherent DMA mask %#llx is larger than dma_addr_t allows\n",
+				 mask);
+			dev_warn(dev, "Driver did not use or check the return value from dma_set_coherent_mask()?\n");
+		}
+		return 0;
+	}
+
+	max_dma_pfn = min(max_pfn, arm_dma_pfn_limit);
+
+	/*
+	 * Translate the device's DMA mask to a PFN limit.  This
+	 * PFN number includes the page which we can DMA to.
+	 */
+	if (dma_to_pfn(dev, mask) < max_dma_pfn) {
+		if (warn)
+			dev_warn(dev, "Coherent DMA mask %#llx (pfn %#lx-%#lx) covers a smaller range of system memory than the DMA zone pfn 0x0-%#lx\n",
+				 mask,
+				 dma_to_pfn(dev, 0), dma_to_pfn(dev, mask) + 1,
+				 max_dma_pfn + 1);
+		return 0;
+	}
+
+	return 1;
+}
+
 static u64 get_coherent_dma_mask(struct device *dev)
 {
 	u64 mask = (u64)DMA_BIT_MASK(32);
 
 	if (dev) {
-		unsigned long max_dma_pfn;
-
 		mask = dev->coherent_dma_mask;
 
 		/*
@@ -176,34 +212,8 @@ static u64 get_coherent_dma_mask(struct device *dev)
 			return 0;
 		}
 
-		max_dma_pfn = min(max_pfn, arm_dma_pfn_limit);
+		if (!__dma_supported(dev, mask, true))
-
-		/*
-		 * If the mask allows for more memory than we can address,
-		 * and we actually have that much memory, then fail the
-		 * allocation.
-		 */
-		if (sizeof(mask) != sizeof(dma_addr_t) &&
-		    mask > (dma_addr_t)~0 &&
-		    dma_to_pfn(dev, ~0) > max_dma_pfn) {
-			dev_warn(dev, "Coherent DMA mask %#llx is larger than dma_addr_t allows\n",
-				 mask);
-			dev_warn(dev, "Driver did not use or check the return value from dma_set_coherent_mask()?\n");
 			return 0;
-		}
-
-		/*
-		 * Now check that the mask, when translated to a PFN,
-		 * fits within the allowable addresses which we can
-		 * allocate.
-		 */
-		if (dma_to_pfn(dev, mask) < max_dma_pfn) {
-			dev_warn(dev, "Coherent DMA mask %#llx (pfn %#lx-%#lx) covers a smaller range of system memory than the DMA zone pfn 0x0-%#lx\n",
-				 mask,
-				 dma_to_pfn(dev, 0), dma_to_pfn(dev, mask) + 1,
-				 arm_dma_pfn_limit + 1);
-			return 0;
-		}
 	}
 
 	return mask;
@@ -1032,28 +1042,7 @@ void arm_dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg,
  */
 int dma_supported(struct device *dev, u64 mask)
 {
-	unsigned long limit;
+	return __dma_supported(dev, mask, false);
-
-	/*
-	 * If the mask allows for more memory than we can address,
-	 * and we actually have that much memory, then we must
-	 * indicate that DMA to this device is not supported.
-	 */
-	if (sizeof(mask) != sizeof(dma_addr_t) &&
-	    mask > (dma_addr_t)~0 &&
-	    dma_to_pfn(dev, ~0) > arm_dma_pfn_limit)
-		return 0;
-
-	/*
-	 * Translate the device's DMA mask to a PFN limit.  This
-	 * PFN number includes the page which we can DMA to.
-	 */
-	limit = dma_to_pfn(dev, mask);
-
-	if (limit < arm_dma_pfn_limit)
-		return 0;
-
-	return 1;
 }
 EXPORT_SYMBOL(dma_supported);
 

arch/arm/mm/init.c

@@ -229,7 +229,7 @@ void __init setup_dma_zone(const struct machine_desc *mdesc)
 #ifdef CONFIG_ZONE_DMA
 	if (mdesc->dma_zone_size) {
 		arm_dma_zone_size = mdesc->dma_zone_size;
-		arm_dma_limit = PHYS_OFFSET + arm_dma_zone_size - 1;
+		arm_dma_limit = __pv_phys_offset + arm_dma_zone_size - 1;
 	} else
 		arm_dma_limit = 0xffffffff;
 	arm_dma_pfn_limit = arm_dma_limit >> PAGE_SHIFT;

arch/arm64/Kconfig

@@ -159,8 +159,7 @@ config NR_CPUS
 	range 2 32
 	depends on SMP
 	# These have to remain sorted largest to smallest
-	default "8" if ARCH_XGENE
+	default "8"
-	default "4"
 
 config HOTPLUG_CPU
 	bool "Support for hot-pluggable CPUs"

arch/arm64/include/asm/io.h

@@ -229,7 +229,7 @@ extern void __iomem *__ioremap(phys_addr_t phys_addr, size_t size, pgprot_t prot
 extern void __iounmap(volatile void __iomem *addr);
 extern void __iomem *ioremap_cache(phys_addr_t phys_addr, size_t size);
 
-#define PROT_DEFAULT		(PTE_TYPE_PAGE | PTE_AF | PTE_DIRTY)
+#define PROT_DEFAULT		(pgprot_default | PTE_DIRTY)
 #define PROT_DEVICE_nGnRE	(PROT_DEFAULT | PTE_PXN | PTE_UXN | PTE_ATTRINDX(MT_DEVICE_nGnRE))
 #define PROT_NORMAL_NC		(PROT_DEFAULT | PTE_ATTRINDX(MT_NORMAL_NC))
 #define PROT_NORMAL		(PROT_DEFAULT | PTE_ATTRINDX(MT_NORMAL))

arch/arm64/include/asm/pgtable-hwdef.h

@@ -43,7 +43,7 @@
  * Section
  */
 #define PMD_SECT_VALID		(_AT(pmdval_t, 1) << 0)
-#define PMD_SECT_PROT_NONE	(_AT(pmdval_t, 1) << 2)
+#define PMD_SECT_PROT_NONE	(_AT(pmdval_t, 1) << 58)
 #define PMD_SECT_USER		(_AT(pmdval_t, 1) << 6)		/* AP[1] */
 #define PMD_SECT_RDONLY		(_AT(pmdval_t, 1) << 7)		/* AP[2] */
 #define PMD_SECT_S		(_AT(pmdval_t, 3) << 8)

arch/arm64/kernel/head.S

@@ -282,8 +282,9 @@ ENDPROC(secondary_holding_pen)
 	 * be used where CPUs are brought online dynamically by the kernel.
 	 */
 ENTRY(secondary_entry)
-	bl	__calc_phys_offset		// x2=phys offset
 	bl	el2_setup			// Drop to EL1
+	bl	__calc_phys_offset		// x24=PHYS_OFFSET, x28=PHYS_OFFSET-PAGE_OFFSET
+	bl	set_cpu_boot_mode_flag
 	b	secondary_startup
 ENDPROC(secondary_entry)
 

arch/arm64/mm/proc.S

@@ -111,12 +111,12 @@ ENTRY(__cpu_setup)
 	bl	__flush_dcache_all
 	mov	lr, x28
 	ic	iallu				// I+BTB cache invalidate
+	tlbi	vmalle1is			// invalidate I + D TLBs
 	dsb	sy
 
 	mov	x0, #3 << 20
 	msr	cpacr_el1, x0			// Enable FP/ASIMD
 	msr	mdscr_el1, xzr			// Reset mdscr_el1
-	tlbi	vmalle1is			// invalidate I + D TLBs
 	/*
 	 * Memory region attributes for LPAE:
 	 *

arch/avr32/boards/favr-32/setup.c

@@ -298,8 +298,10 @@ static int __init set_abdac_rate(struct platform_device *pdev)
 	 */
 	retval = clk_round_rate(pll1,
 			CONFIG_BOARD_FAVR32_ABDAC_RATE * 256 * 16);
-	if (retval < 0)
+	if (retval <= 0) {
+		retval = -EINVAL;
 		goto out_abdac;
+	}
 
 	retval = clk_set_rate(pll1, retval);
 	if (retval != 0)

arch/avr32/configs/atngw100_defconfig

@@ -59,7 +59,6 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
 # CONFIG_FW_LOADER is not set
 CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y

arch/avr32/configs/atngw100_evklcd100_defconfig

@@ -61,7 +61,6 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
 # CONFIG_FW_LOADER is not set
 CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y

arch/avr32/configs/atngw100_evklcd101_defconfig

@@ -60,7 +60,6 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
 # CONFIG_FW_LOADER is not set
 CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y

arch/avr32/configs/atngw100_mrmt_defconfig

@@ -48,7 +48,6 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
 # CONFIG_FW_LOADER is not set
 CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y

arch/avr32/configs/atngw100mkii_defconfig

@@ -59,7 +59,6 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
 # CONFIG_FW_LOADER is not set
 CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y

arch/avr32/configs/atngw100mkii_evklcd100_defconfig

@@ -62,7 +62,6 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
 # CONFIG_FW_LOADER is not set
 CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y

arch/avr32/configs/atngw100mkii_evklcd101_defconfig

@@ -61,7 +61,6 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
 # CONFIG_FW_LOADER is not set
 CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y

arch/avr32/configs/atstk1002_defconfig

@@ -53,7 +53,6 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
 # CONFIG_FW_LOADER is not set
 CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y

arch/avr32/configs/atstk1003_defconfig

@@ -42,7 +42,6 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
 # CONFIG_FW_LOADER is not set
 CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y

arch/avr32/configs/atstk1004_defconfig

@@ -42,7 +42,6 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
 # CONFIG_FW_LOADER is not set
 CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y

arch/avr32/configs/atstk1006_defconfig

@@ -54,7 +54,6 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
 # CONFIG_FW_LOADER is not set
 CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y

arch/avr32/configs/favr-32_defconfig

@@ -58,7 +58,6 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
 # CONFIG_FW_LOADER is not set
 CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y

arch/avr32/configs/hammerhead_defconfig

@@ -58,7 +58,6 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
 # CONFIG_FW_LOADER is not set
 CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y

arch/avr32/configs/merisc_defconfig

@@ -46,7 +46,6 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 # CONFIG_FW_LOADER is not set
 CONFIG_MTD=y
 CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
 CONFIG_MTD_CFI=y

arch/avr32/configs/mimc200_defconfig

@@ -49,7 +49,6 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
 # CONFIG_FW_LOADER is not set
 CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y

arch/avr32/kernel/time.c

@@ -59,7 +59,7 @@ static irqreturn_t timer_interrupt(int irq, void *dev_id)
 static struct irqaction timer_irqaction = {
 	.handler	= timer_interrupt,
 	/* Oprofile uses the same irq as the timer, so allow it to be shared */
-	.flags		= IRQF_TIMER | IRQF_DISABLED | IRQF_SHARED,
+	.flags		= IRQF_TIMER | IRQF_SHARED,
 	.name		= "avr32_comparator",
 };
 

arch/avr32/mach-at32ap/pm.c

@@ -181,7 +181,7 @@ static const struct platform_suspend_ops avr32_pm_ops = {
 	.enter	= avr32_pm_enter,
 };
 
-static unsigned long avr32_pm_offset(void *symbol)
+static unsigned long __init avr32_pm_offset(void *symbol)
 {
 	extern u8 pm_exception[];
 

arch/ia64/Kconfig

@@ -7,6 +7,7 @@ menu "Processor type and features"
 config IA64
 	bool
 	select ARCH_MIGHT_HAVE_PC_PARPORT
+	select ARCH_MIGHT_HAVE_PC_SERIO
 	select PCI if (!IA64_HP_SIM)
 	select ACPI if (!IA64_HP_SIM)
 	select PM if (!IA64_HP_SIM)

arch/mips/Kconfig

@@ -2,6 +2,7 @@ config MIPS
 	bool
 	default y
 	select ARCH_MIGHT_HAVE_PC_PARPORT
+	select ARCH_MIGHT_HAVE_PC_SERIO
 	select HAVE_CONTEXT_TRACKING
 	select HAVE_GENERIC_DMA_COHERENT
 	select HAVE_IDE

arch/powerpc/Kconfig

@@ -86,6 +86,7 @@ config PPC
 	bool
 	default y
 	select ARCH_MIGHT_HAVE_PC_PARPORT
+	select ARCH_MIGHT_HAVE_PC_SERIO
 	select BINFMT_ELF
 	select OF
 	select OF_EARLY_FLATTREE

arch/powerpc/boot/dts/mpc5121.dtsi

@@ -77,7 +77,6 @@
 		compatible = "fsl,mpc5121-immr";
 		#address-cells = <1>;
 		#size-cells = <1>;
-		#interrupt-cells = <2>;
 		ranges = <0x0 0x80000000 0x400000>;
 		reg = <0x80000000 0x400000>;
 		bus-frequency = <66000000>;	/* 66 MHz ips bus */

arch/powerpc/configs/52xx/cm5200_defconfig

@@ -12,7 +12,6 @@ CONFIG_EXPERT=y
 CONFIG_PPC_MPC52xx=y
 CONFIG_PPC_MPC5200_SIMPLE=y
 # CONFIG_PPC_PMAC is not set
-CONFIG_PPC_BESTCOMM=y
 CONFIG_SPARSE_IRQ=y
 CONFIG_PM=y
 # CONFIG_PCI is not set
@@ -71,6 +70,8 @@ CONFIG_USB_DEVICEFS=y
 CONFIG_USB_OHCI_HCD=y
 CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
 CONFIG_USB_STORAGE=y
+CONFIG_DMADEVICES=y
+CONFIG_PPC_BESTCOMM=y
 CONFIG_EXT2_FS=y
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set

arch/powerpc/configs/52xx/lite5200b_defconfig

@@ -15,7 +15,6 @@ CONFIG_PPC_MPC52xx=y
 CONFIG_PPC_MPC5200_SIMPLE=y
 CONFIG_PPC_LITE5200=y
 # CONFIG_PPC_PMAC is not set
-CONFIG_PPC_BESTCOMM=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_SPARSE_IRQ=y
@@ -59,6 +58,8 @@ CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_MPC=y
 # CONFIG_HWMON is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=m
+CONFIG_DMADEVICES=y
+CONFIG_PPC_BESTCOMM=y
 CONFIG_EXT2_FS=y
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set

arch/powerpc/configs/52xx/motionpro_defconfig

@@ -12,7 +12,6 @@ CONFIG_EXPERT=y
 CONFIG_PPC_MPC52xx=y
 CONFIG_PPC_MPC5200_SIMPLE=y
 # CONFIG_PPC_PMAC is not set
-CONFIG_PPC_BESTCOMM=y
 CONFIG_SPARSE_IRQ=y
 CONFIG_PM=y
 # CONFIG_PCI is not set
@@ -84,6 +83,8 @@ CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_TIMER=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_DS1307=y
+CONFIG_DMADEVICES=y
+CONFIG_PPC_BESTCOMM=y
 CONFIG_EXT2_FS=y
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set

arch/powerpc/configs/52xx/pcm030_defconfig

@@ -21,7 +21,6 @@ CONFIG_MODULE_UNLOAD=y
 CONFIG_PPC_MPC52xx=y
 CONFIG_PPC_MPC5200_SIMPLE=y
 # CONFIG_PPC_PMAC is not set
-CONFIG_PPC_BESTCOMM=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_HZ_100=y
@@ -87,6 +86,8 @@ CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
 CONFIG_USB_STORAGE=m
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_PCF8563=m
+CONFIG_DMADEVICES=y
+CONFIG_PPC_BESTCOMM=y
 CONFIG_EXT2_FS=m
 CONFIG_EXT3_FS=m
 # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set

arch/powerpc/configs/52xx/tqm5200_defconfig

@@ -17,7 +17,6 @@ CONFIG_PPC_MPC52xx=y
 CONFIG_PPC_MPC5200_SIMPLE=y
 CONFIG_PPC_MPC5200_BUGFIX=y
 # CONFIG_PPC_PMAC is not set
-CONFIG_PPC_BESTCOMM=y
 CONFIG_PM=y
 # CONFIG_PCI is not set
 CONFIG_NET=y
@@ -86,6 +85,8 @@ CONFIG_USB_STORAGE=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_DS1307=y
 CONFIG_RTC_DRV_DS1374=y
+CONFIG_DMADEVICES=y
+CONFIG_PPC_BESTCOMM=y
 CONFIG_EXT2_FS=y
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set

arch/powerpc/configs/mpc5200_defconfig

@@ -15,7 +15,6 @@ CONFIG_PPC_MEDIA5200=y
 CONFIG_PPC_MPC5200_BUGFIX=y
 CONFIG_PPC_MPC5200_LPBFIFO=m
 # CONFIG_PPC_PMAC is not set
-CONFIG_PPC_BESTCOMM=y
 CONFIG_SIMPLE_GPIO=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
@@ -125,6 +124,8 @@ CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_DS1307=y
 CONFIG_RTC_DRV_DS1374=y
 CONFIG_RTC_DRV_PCF8563=m
+CONFIG_DMADEVICES=y
+CONFIG_PPC_BESTCOMM=y
 CONFIG_EXT2_FS=y
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set

arch/powerpc/configs/pasemi_defconfig

@@ -2,7 +2,6 @@ CONFIG_PPC64=y
 CONFIG_ALTIVEC=y
 CONFIG_SMP=y
 CONFIG_NR_CPUS=2
-CONFIG_EXPERIMENTAL=y
 CONFIG_SYSVIPC=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
@@ -45,8 +44,9 @@ CONFIG_INET_AH=y
 CONFIG_INET_ESP=y
 # CONFIG_IPV6 is not set
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
 CONFIG_MTD=y
-CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
 CONFIG_MTD_SLRAM=y
 CONFIG_MTD_PHRAM=y
@@ -88,7 +88,6 @@ CONFIG_BLK_DEV_DM=y
 CONFIG_DM_CRYPT=y
 CONFIG_NETDEVICES=y
 CONFIG_DUMMY=y
-CONFIG_MII=y
 CONFIG_TIGON3=y
 CONFIG_E1000=y
 CONFIG_PASEMI_MAC=y
@@ -174,8 +173,8 @@ CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ISO8859_1=y
 CONFIG_CRC_CCITT=y
 CONFIG_PRINTK_TIME=y
-CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_FS=y
+CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_KERNEL=y
 CONFIG_DETECT_HUNG_TASK=y
 # CONFIG_SCHED_DEBUG is not set

arch/powerpc/include/asm/pgalloc-32.h

@@ -84,10 +84,8 @@ static inline void pgtable_free_tlb(struct mmu_gather *tlb,
 static inline void __pte_free_tlb(struct mmu_gather *tlb, pgtable_t table,
 				  unsigned long address)
 {
-	struct page *page = page_address(table);
-
 	tlb_flush_pgtable(tlb, address);
-	pgtable_page_dtor(page);
+	pgtable_page_dtor(table);
-	pgtable_free_tlb(tlb, page, 0);
+	pgtable_free_tlb(tlb, page_address(table), 0);
 }
 #endif /* _ASM_POWERPC_PGALLOC_32_H */

arch/powerpc/include/asm/pgalloc-64.h

@@ -148,11 +148,9 @@ static inline void pgtable_free_tlb(struct mmu_gather *tlb,
 static inline void __pte_free_tlb(struct mmu_gather *tlb, pgtable_t table,
 				  unsigned long address)
 {
-	struct page *page = page_address(table);
-
 	tlb_flush_pgtable(tlb, address);
-	pgtable_page_dtor(page);
+	pgtable_page_dtor(table);
-	pgtable_free_tlb(tlb, page, 0);
+	pgtable_free_tlb(tlb, page_address(table), 0);
 }
 
 #else /* if CONFIG_PPC_64K_PAGES */

arch/powerpc/kernel/machine_kexec.c

@@ -148,7 +148,7 @@ void __init reserve_crashkernel(void)
 		 * a small SLB (128MB) since the crash kernel needs to place
 		 * itself and some stacks to be in the first segment.
 		 */
-		crashk_res.start = min(0x80000000ULL, (ppc64_rma_size / 2));
+		crashk_res.start = min(0x8000000ULL, (ppc64_rma_size / 2));
 #else
 		crashk_res.start = KDUMP_KERNELBASE;
 #endif

arch/powerpc/kernel/misc_64.S

@@ -246,8 +246,8 @@ _GLOBAL(__bswapdi2)
 	or	r3,r7,r9
 	blr
 
-#if defined(CONFIG_PPC_PMAC) || defined(CONFIG_PPC_MAPLE)
 
+#ifdef CONFIG_PPC_EARLY_DEBUG_BOOTX
 _GLOBAL(rmci_on)
 	sync
 	isync
@@ -277,6 +277,9 @@ _GLOBAL(rmci_off)
 	isync
 	sync
 	blr
+#endif /* CONFIG_PPC_EARLY_DEBUG_BOOTX */
+
+#if defined(CONFIG_PPC_PMAC) || defined(CONFIG_PPC_MAPLE)
 
 /*
  * Do an IO access in real mode

arch/powerpc/platforms/powernv/pci-ioda.c

@@ -720,6 +720,7 @@ static void pnv_pci_ioda2_setup_dma_pe(struct pnv_phb *phb,
 		tbl->it_type = TCE_PCI_SWINV_CREATE | TCE_PCI_SWINV_FREE;
 	}
 	iommu_init_table(tbl, phb->hose->node);
+	iommu_register_group(tbl, pci_domain_nr(pe->pbus), pe->pe_number);
 
 	if (pe->pdev)
 		set_iommu_table_base(&pe->pdev->dev, tbl);

arch/powerpc/sysdev/ppc4xx_ocm.c

@@ -339,7 +339,7 @@ void *ppc4xx_ocm_alloc(phys_addr_t *phys, int size, int align,
 		if (IS_ERR_VALUE(offset))
 			continue;
 
-		ocm_blk = kzalloc(sizeof(struct ocm_block *), GFP_KERNEL);
+		ocm_blk = kzalloc(sizeof(struct ocm_block), GFP_KERNEL);
 		if (!ocm_blk) {
 			printk(KERN_ERR "PPC4XX OCM: could not allocate ocm block");
 			rh_free(ocm_reg->rh, offset);

arch/s390/Kconfig

@@ -347,14 +347,14 @@ config SMP
 	  Even if you don't know what to do here, say Y.
 
 config NR_CPUS
-	int "Maximum number of CPUs (2-64)"
+	int "Maximum number of CPUs (2-256)"
-	range 2 64
+	range 2 256
 	depends on SMP
 	default "32" if !64BIT
 	default "64" if 64BIT
 	help
 	  This allows you to specify the maximum number of CPUs which this
-	  kernel will support.  The maximum supported value is 64 and the
+	  kernel will support. The maximum supported value is 256 and the
 	  minimum value which makes sense is 2.
 
 	  This is purely to save memory - each supported CPU adds

arch/s390/include/asm/sclp.h

@@ -8,6 +8,7 @@
 
 #include <linux/types.h>
 #include <asm/chpid.h>
+#include <asm/cpu.h>
 
 #define SCLP_CHP_INFO_MASK_SIZE		32
 
@@ -37,7 +38,7 @@ struct sclp_cpu_info {
 	unsigned int standby;
 	unsigned int combined;
 	int has_cpu_type;
-	struct sclp_cpu_entry cpu[255];
+	struct sclp_cpu_entry cpu[MAX_CPU_ADDRESS + 1];
 };
 
 int sclp_get_cpu_info(struct sclp_cpu_info *info);

arch/s390/kernel/asm-offsets.c

@@ -72,6 +72,7 @@ int main(void)
 	/* constants used by the vdso */
 	DEFINE(__CLOCK_REALTIME, CLOCK_REALTIME);
 	DEFINE(__CLOCK_MONOTONIC, CLOCK_MONOTONIC);
+	DEFINE(__CLOCK_THREAD_CPUTIME_ID, CLOCK_THREAD_CPUTIME_ID);
 	DEFINE(__CLOCK_REALTIME_RES, MONOTONIC_RES_NSEC);
 	BLANK();
 	/* idle data offsets */