Centos-kernel-stream-9/lib/stackdepot.c

631 lines
17 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0-only
mm, kasan: stackdepot implementation. Enable stackdepot for SLAB Implement the stack depot and provide CONFIG_STACKDEPOT. Stack depot will allow KASAN store allocation/deallocation stack traces for memory chunks. The stack traces are stored in a hash table and referenced by handles which reside in the kasan_alloc_meta and kasan_free_meta structures in the allocated memory chunks. IRQ stack traces are cut below the IRQ entry point to avoid unnecessary duplication. Right now stackdepot support is only enabled in SLAB allocator. Once KASAN features in SLAB are on par with those in SLUB we can switch SLUB to stackdepot as well, thus removing the dependency on SLUB stack bookkeeping, which wastes a lot of memory. This patch is based on the "mm: kasan: stack depots" patch originally prepared by Dmitry Chernenkov. Joonsoo has said that he plans to reuse the stackdepot code for the mm/page_owner.c debugging facility. [akpm@linux-foundation.org: s/depot_stack_handle/depot_stack_handle_t] [aryabinin@virtuozzo.com: comment style fixes] Signed-off-by: Alexander Potapenko <glider@google.com> Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Andrey Konovalov <adech.fo@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Konstantin Serebryany <kcc@google.com> Cc: Dmitry Chernenkov <dmitryc@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-25 21:22:08 +00:00
/*
* Stack depot - a stack trace storage that avoids duplication.
mm, kasan: stackdepot implementation. Enable stackdepot for SLAB Implement the stack depot and provide CONFIG_STACKDEPOT. Stack depot will allow KASAN store allocation/deallocation stack traces for memory chunks. The stack traces are stored in a hash table and referenced by handles which reside in the kasan_alloc_meta and kasan_free_meta structures in the allocated memory chunks. IRQ stack traces are cut below the IRQ entry point to avoid unnecessary duplication. Right now stackdepot support is only enabled in SLAB allocator. Once KASAN features in SLAB are on par with those in SLUB we can switch SLUB to stackdepot as well, thus removing the dependency on SLUB stack bookkeeping, which wastes a lot of memory. This patch is based on the "mm: kasan: stack depots" patch originally prepared by Dmitry Chernenkov. Joonsoo has said that he plans to reuse the stackdepot code for the mm/page_owner.c debugging facility. [akpm@linux-foundation.org: s/depot_stack_handle/depot_stack_handle_t] [aryabinin@virtuozzo.com: comment style fixes] Signed-off-by: Alexander Potapenko <glider@google.com> Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Andrey Konovalov <adech.fo@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Konstantin Serebryany <kcc@google.com> Cc: Dmitry Chernenkov <dmitryc@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-25 21:22:08 +00:00
*
* Internally, stack depot maintains a hash table of unique stacktraces. The
* stack traces themselves are stored contiguously one after another in a set
* of separate page allocations.
*
mm, kasan: stackdepot implementation. Enable stackdepot for SLAB Implement the stack depot and provide CONFIG_STACKDEPOT. Stack depot will allow KASAN store allocation/deallocation stack traces for memory chunks. The stack traces are stored in a hash table and referenced by handles which reside in the kasan_alloc_meta and kasan_free_meta structures in the allocated memory chunks. IRQ stack traces are cut below the IRQ entry point to avoid unnecessary duplication. Right now stackdepot support is only enabled in SLAB allocator. Once KASAN features in SLAB are on par with those in SLUB we can switch SLUB to stackdepot as well, thus removing the dependency on SLUB stack bookkeeping, which wastes a lot of memory. This patch is based on the "mm: kasan: stack depots" patch originally prepared by Dmitry Chernenkov. Joonsoo has said that he plans to reuse the stackdepot code for the mm/page_owner.c debugging facility. [akpm@linux-foundation.org: s/depot_stack_handle/depot_stack_handle_t] [aryabinin@virtuozzo.com: comment style fixes] Signed-off-by: Alexander Potapenko <glider@google.com> Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Andrey Konovalov <adech.fo@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Konstantin Serebryany <kcc@google.com> Cc: Dmitry Chernenkov <dmitryc@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-25 21:22:08 +00:00
* Author: Alexander Potapenko <glider@google.com>
* Copyright (C) 2016 Google, Inc.
*
* Based on the code by Dmitry Chernenkov.
mm, kasan: stackdepot implementation. Enable stackdepot for SLAB Implement the stack depot and provide CONFIG_STACKDEPOT. Stack depot will allow KASAN store allocation/deallocation stack traces for memory chunks. The stack traces are stored in a hash table and referenced by handles which reside in the kasan_alloc_meta and kasan_free_meta structures in the allocated memory chunks. IRQ stack traces are cut below the IRQ entry point to avoid unnecessary duplication. Right now stackdepot support is only enabled in SLAB allocator. Once KASAN features in SLAB are on par with those in SLUB we can switch SLUB to stackdepot as well, thus removing the dependency on SLUB stack bookkeeping, which wastes a lot of memory. This patch is based on the "mm: kasan: stack depots" patch originally prepared by Dmitry Chernenkov. Joonsoo has said that he plans to reuse the stackdepot code for the mm/page_owner.c debugging facility. [akpm@linux-foundation.org: s/depot_stack_handle/depot_stack_handle_t] [aryabinin@virtuozzo.com: comment style fixes] Signed-off-by: Alexander Potapenko <glider@google.com> Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Andrey Konovalov <adech.fo@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Konstantin Serebryany <kcc@google.com> Cc: Dmitry Chernenkov <dmitryc@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-25 21:22:08 +00:00
*/
#define pr_fmt(fmt) "stackdepot: " fmt
mm, kasan: stackdepot implementation. Enable stackdepot for SLAB Implement the stack depot and provide CONFIG_STACKDEPOT. Stack depot will allow KASAN store allocation/deallocation stack traces for memory chunks. The stack traces are stored in a hash table and referenced by handles which reside in the kasan_alloc_meta and kasan_free_meta structures in the allocated memory chunks. IRQ stack traces are cut below the IRQ entry point to avoid unnecessary duplication. Right now stackdepot support is only enabled in SLAB allocator. Once KASAN features in SLAB are on par with those in SLUB we can switch SLUB to stackdepot as well, thus removing the dependency on SLUB stack bookkeeping, which wastes a lot of memory. This patch is based on the "mm: kasan: stack depots" patch originally prepared by Dmitry Chernenkov. Joonsoo has said that he plans to reuse the stackdepot code for the mm/page_owner.c debugging facility. [akpm@linux-foundation.org: s/depot_stack_handle/depot_stack_handle_t] [aryabinin@virtuozzo.com: comment style fixes] Signed-off-by: Alexander Potapenko <glider@google.com> Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Andrey Konovalov <adech.fo@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Konstantin Serebryany <kcc@google.com> Cc: Dmitry Chernenkov <dmitryc@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-25 21:22:08 +00:00
#include <linux/gfp.h>
#include <linux/jhash.h>
#include <linux/kernel.h>
#include <linux/kmsan.h>
#include <linux/list.h>
mm, kasan: stackdepot implementation. Enable stackdepot for SLAB Implement the stack depot and provide CONFIG_STACKDEPOT. Stack depot will allow KASAN store allocation/deallocation stack traces for memory chunks. The stack traces are stored in a hash table and referenced by handles which reside in the kasan_alloc_meta and kasan_free_meta structures in the allocated memory chunks. IRQ stack traces are cut below the IRQ entry point to avoid unnecessary duplication. Right now stackdepot support is only enabled in SLAB allocator. Once KASAN features in SLAB are on par with those in SLUB we can switch SLUB to stackdepot as well, thus removing the dependency on SLUB stack bookkeeping, which wastes a lot of memory. This patch is based on the "mm: kasan: stack depots" patch originally prepared by Dmitry Chernenkov. Joonsoo has said that he plans to reuse the stackdepot code for the mm/page_owner.c debugging facility. [akpm@linux-foundation.org: s/depot_stack_handle/depot_stack_handle_t] [aryabinin@virtuozzo.com: comment style fixes] Signed-off-by: Alexander Potapenko <glider@google.com> Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Andrey Konovalov <adech.fo@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Konstantin Serebryany <kcc@google.com> Cc: Dmitry Chernenkov <dmitryc@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-25 21:22:08 +00:00
#include <linux/mm.h>
lib/stackdepot: allow optional init and stack_table allocation by kvmalloc() Conflicts: Drop changes to drivers/gpu/drm/drm_dp_mst_topology.c - file no longer exists. Affected function was moved to drivers/gpu/drm/dp/drm_dp_mst_topology.c and it already has the change which was added in RHEL commit 105d2d483226 ("Merge DRM changes from upstream v5.16..v5.17") Drop changes to drivers/gpu/drm/i915/intel_runtime_pm.c - It already has the change which was also added in RHEL commit 105d2d483226. include/linux/ref_tracker.h - Merge conflict caused by presence of 8fd5522f44dc ("ref_tracker: add a count of untracked references") Bugzilla: https://bugzilla.redhat.com/2120352 commit 2dba5eb1c73b6ba2988ced07250edeac0f8cbf5a Author: Vlastimil Babka <vbabka@suse.cz> Date: Fri Jan 21 22:14:27 2022 -0800 lib/stackdepot: allow optional init and stack_table allocation by kvmalloc() Currently, enabling CONFIG_STACKDEPOT means its stack_table will be allocated from memblock, even if stack depot ends up not actually used. The default size of stack_table is 4MB on 32-bit, 8MB on 64-bit. This is fine for use-cases such as KASAN which is also a config option and has overhead on its own. But it's an issue for functionality that has to be actually enabled on boot (page_owner) or depends on hardware (GPU drivers) and thus the memory might be wasted. This was raised as an issue [1] when attempting to add stackdepot support for SLUB's debug object tracking functionality. It's common to build kernels with CONFIG_SLUB_DEBUG and enable slub_debug on boot only when needed, or create only specific kmem caches with debugging for testing purposes. It would thus be more efficient if stackdepot's table was allocated only when actually going to be used. This patch thus makes the allocation (and whole stack_depot_init() call) optional: - Add a CONFIG_STACKDEPOT_ALWAYS_INIT flag to keep using the current well-defined point of allocation as part of mem_init(). Make CONFIG_KASAN select this flag. - Other users have to call stack_depot_init() as part of their own init when it's determined that stack depot will actually be used. This may depend on both config and runtime conditions. Convert current users which are page_owner and several in the DRM subsystem. Same will be done for SLUB later. - Because the init might now be called after the boot-time memblock allocation has given all memory to the buddy allocator, change stack_depot_init() to allocate stack_table with kvmalloc() when memblock is no longer available. Also handle allocation failure by disabling stackdepot (could have theoretically happened even with memblock allocation previously), and don't unnecessarily align the memblock allocation to its own size anymore. [1] https://lore.kernel.org/all/CAMuHMdW=eoVzM1Re5FVoEN87nKfiLmM2+Ah7eNu2KXE hCvbZyA@mail.gmail.com/ Link: https://lkml.kernel.org/r/20211013073005.11351-1-vbabka@suse.cz Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Dmitry Vyukov <dvyukov@google.com> Reviewed-by: Marco Elver <elver@google.com> # stackdepot Cc: Marco Elver <elver@google.com> Cc: Vijayanand Jitta <vjitta@codeaurora.org> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Oliver Glitta <glittao@gmail.com> Cc: Imran Khan <imran.f.khan@oracle.com> From: Colin Ian King <colin.king@canonical.com> Subject: lib/stackdepot: fix spelling mistake and grammar in pr_err message There is a spelling mistake of the work allocation so fix this and re-phrase the message to make it easier to read. Link: https://lkml.kernel.org/r/20211015104159.11282-1-colin.king@canonical. com Signed-off-by: Colin Ian King <colin.king@canonical.com> Cc: Vlastimil Babka <vbabka@suse.cz> From: Vlastimil Babka <vbabka@suse.cz> Subject: lib/stackdepot: allow optional init and stack_table allocation by k vmalloc() - fixup On FLATMEM, we call page_ext_init_flatmem_late() just before kmem_cache_init() which means stack_depot_init() (called by page owner init) will not recognize properly it should use kvmalloc() and not memblock_alloc(). memblock_alloc() will also not issue a warning and return a block memory that can be invalid and cause kernel page fault when saving stacks, as reported by the kernel test robot [1]. Fix this by moving page_ext_init_flatmem_late() below kmem_cache_init() so that slab_is_available() is true during stack_depot_init(). SPARSEMEM doesn't have this issue, as it doesn't do page_ext_init_flatmem_late(), but a different page_ext_init() even later in the boot process. Thanks to Mike Rapoport for pointing out the FLATMEM init ordering issue. While at it, also actually resolve a checkpatch warning in stack_depot_init( ) from DRM CI, which was supposed to be in the original patch already. [1] https://lore.kernel.org/all/20211014085450.GC18719@xsang-OptiPlex-9020/ Link: https://lkml.kernel.org/r/6abd9213-19a9-6d58-cedc-2414386d2d81@suse.cz Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Reported-by: kernel test robot <oliver.sang@intel.com> Cc: Mike Rapoport <rppt@kernel.org> Cc: Stephen Rothwell <sfr@canb.auug.org.au> From: Vlastimil Babka <vbabka@suse.cz> Subject: lib/stackdepot: allow optional init and stack_table allocation by k vmalloc() - fixup3 Due to cd06ab2fd48f ("drm/locking: add backtrace for locking contended locks without backoff") landing recently to -next adding a new stack depot user in drivers/gpu/drm/drm_modeset_lock.c we need to add an appropriate call to stack_depot_init() there as well. Link: https://lkml.kernel.org/r/2a692365-cfa1-64f2-34e0-8aa5674dce5e@suse.cz Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Naresh Kamboju <naresh.kamboju@linaro.org> Cc: Marco Elver <elver@google.com> Cc: Vijayanand Jitta <vjitta@codeaurora.org> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Oliver Glitta <glittao@gmail.com> Cc: Imran Khan <imran.f.khan@oracle.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> From: Vlastimil Babka <vbabka@suse.cz> Subject: lib/stackdepot: allow optional init and stack_table allocation by k vmalloc() - fixup4 Due to 4e66934eaadc ("lib: add reference counting tracking infrastructure") landing recently to net-next adding a new stack depot user in lib/ref_tracker.c we need to add an appropriate call to stack_depot_init() there as well. Link: https://lkml.kernel.org/r/45c1b738-1a2f-5b5f-2f6d-86fab206d01c@suse.cz Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Reviewed-by: Eric Dumazet <edumazet@google.com> Cc: Jiri Slab <jirislaby@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Chris von Recklinghausen <crecklin@redhat.com>
2022-10-12 11:08:52 +00:00
#include <linux/mutex.h>
mm, kasan: stackdepot implementation. Enable stackdepot for SLAB Implement the stack depot and provide CONFIG_STACKDEPOT. Stack depot will allow KASAN store allocation/deallocation stack traces for memory chunks. The stack traces are stored in a hash table and referenced by handles which reside in the kasan_alloc_meta and kasan_free_meta structures in the allocated memory chunks. IRQ stack traces are cut below the IRQ entry point to avoid unnecessary duplication. Right now stackdepot support is only enabled in SLAB allocator. Once KASAN features in SLAB are on par with those in SLUB we can switch SLUB to stackdepot as well, thus removing the dependency on SLUB stack bookkeeping, which wastes a lot of memory. This patch is based on the "mm: kasan: stack depots" patch originally prepared by Dmitry Chernenkov. Joonsoo has said that he plans to reuse the stackdepot code for the mm/page_owner.c debugging facility. [akpm@linux-foundation.org: s/depot_stack_handle/depot_stack_handle_t] [aryabinin@virtuozzo.com: comment style fixes] Signed-off-by: Alexander Potapenko <glider@google.com> Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Andrey Konovalov <adech.fo@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Konstantin Serebryany <kcc@google.com> Cc: Dmitry Chernenkov <dmitryc@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-25 21:22:08 +00:00
#include <linux/percpu.h>
#include <linux/printk.h>
#include <linux/slab.h>
lib/stackdepot: use read/write lock JIRA: https://issues.redhat.com/browse/RHEL-28060 commit a6cd957021f2bbbe0f02e5c32389eb4c06aa97c8 Author: Andrey Konovalov <andreyknvl@gmail.com> Date: Mon, 20 Nov 2023 18:47:10 +0100 lib/stackdepot: use read/write lock Currently, stack depot uses the following locking scheme: 1. Lock-free accesses when looking up a stack record, which allows to have multiple users to look up records in parallel; 2. Spinlock for protecting the stack depot pools and the hash table when adding a new record. For implementing the eviction of stack traces from stack depot, the lock-free approach is not going to work anymore, as we will need to be able to also remove records from the hash table. Convert the spinlock into a read/write lock, and drop the atomic accesses, as they are no longer required. Looking up stack traces is now protected by the read lock and adding new records - by the write lock. One of the following patches will add a new function for evicting stack records, which will be protected by the write lock as well. With this change, multiple users can still look up records in parallel. This is preparatory patch for implementing the eviction of stack records from the stack depot. Link: https://lkml.kernel.org/r/9f81ffcc4bb422ebb6326a65a770bf1918634cbb.1700502145.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Reviewed-by: Alexander Potapenko <glider@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Evgenii Stepanov <eugenis@google.com> Cc: Marco Elver <elver@google.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Waiman Long <longman@redhat.com>
2024-03-06 14:35:07 +00:00
#include <linux/spinlock.h>
mm, kasan: stackdepot implementation. Enable stackdepot for SLAB Implement the stack depot and provide CONFIG_STACKDEPOT. Stack depot will allow KASAN store allocation/deallocation stack traces for memory chunks. The stack traces are stored in a hash table and referenced by handles which reside in the kasan_alloc_meta and kasan_free_meta structures in the allocated memory chunks. IRQ stack traces are cut below the IRQ entry point to avoid unnecessary duplication. Right now stackdepot support is only enabled in SLAB allocator. Once KASAN features in SLAB are on par with those in SLUB we can switch SLUB to stackdepot as well, thus removing the dependency on SLUB stack bookkeeping, which wastes a lot of memory. This patch is based on the "mm: kasan: stack depots" patch originally prepared by Dmitry Chernenkov. Joonsoo has said that he plans to reuse the stackdepot code for the mm/page_owner.c debugging facility. [akpm@linux-foundation.org: s/depot_stack_handle/depot_stack_handle_t] [aryabinin@virtuozzo.com: comment style fixes] Signed-off-by: Alexander Potapenko <glider@google.com> Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Andrey Konovalov <adech.fo@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Konstantin Serebryany <kcc@google.com> Cc: Dmitry Chernenkov <dmitryc@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-25 21:22:08 +00:00
#include <linux/stacktrace.h>
#include <linux/stackdepot.h>
#include <linux/string.h>
#include <linux/types.h>
#include <linux/memblock.h>
lib/stackdepot: replace CONFIG_STACK_HASH_ORDER with automatic sizing JIRA: https://issues.redhat.com/browse/RHEL-28060 commit f9987921cb541b1187a648141a9048547ea89ffb Author: Vlastimil Babka <vbabka@suse.cz> Date: Mon, 20 Jun 2022 17:02:49 +0200 lib/stackdepot: replace CONFIG_STACK_HASH_ORDER with automatic sizing As Linus explained [1], setting the stackdepot hash table size as a config option is suboptimal, especially as stackdepot becomes a dependency of less "expert" subsystems than initially (e.g. DRM, networking, SLUB_DEBUG): : (a) it introduces a new compile-time question that isn't sane to ask : a regular user, but is now exposed to regular users. : (b) this by default uses 1MB of memory for a feature that didn't in : the past, so now if you have small machines you need to make sure you : make a special kernel config for them. Ideally we would employ rhashtable for fully automatic resizing, which should be feasible for many of the new users, but problematic for the original users with restricted context that call __stack_depot_save() with can_alloc == false, i.e. KASAN. However we can easily remove the config option and scale the hash table automatically with system memory. The STACK_HASH_MASK constant becomes stack_hash_mask variable and is used only in one mask operation, so the overhead should be negligible to none. For early allocation we can employ the existing alloc_large_system_hash() function and perform similar scaling for the late allocation. The existing limits of the config option (between 4k and 1M buckets) are preserved, and scaling factor is set to one bucket per 16kB memory so on 64bit the max 1M buckets (8MB memory) is achieved with 16GB system, while a 1GB system will use 512kB. Because KASAN is reported to need the maximum number of buckets even with smaller amounts of memory [2], set it as such when kasan_enabled(). If needed, the automatic scaling could be complemented with a boot-time kernel parameter, but it feels pointless to add it without a specific use case. [1] https://lore.kernel.org/all/CAHk-=wjC5nS+fnf6EzRD9yQRJApAhxx7gRB87ZV+pAWo9oVrTg@mail.gmail.com/ [2] https://lore.kernel.org/all/CACT4Y+Y4GZfXOru2z5tFPzFdaSUd+GFc6KVL=bsa0+1m197cQQ@mail.gmail.com/ Link: https://lkml.kernel.org/r/20220620150249.16814-1-vbabka@suse.cz Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Acked-by: Dmitry Vyukov <dvyukov@google.com> Cc: Marco Elver <elver@google.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Konovalov <andreyknvl@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Waiman Long <longman@redhat.com>
2024-03-05 17:04:07 +00:00
#include <linux/kasan-enabled.h>
mm, kasan: stackdepot implementation. Enable stackdepot for SLAB Implement the stack depot and provide CONFIG_STACKDEPOT. Stack depot will allow KASAN store allocation/deallocation stack traces for memory chunks. The stack traces are stored in a hash table and referenced by handles which reside in the kasan_alloc_meta and kasan_free_meta structures in the allocated memory chunks. IRQ stack traces are cut below the IRQ entry point to avoid unnecessary duplication. Right now stackdepot support is only enabled in SLAB allocator. Once KASAN features in SLAB are on par with those in SLUB we can switch SLUB to stackdepot as well, thus removing the dependency on SLUB stack bookkeeping, which wastes a lot of memory. This patch is based on the "mm: kasan: stack depots" patch originally prepared by Dmitry Chernenkov. Joonsoo has said that he plans to reuse the stackdepot code for the mm/page_owner.c debugging facility. [akpm@linux-foundation.org: s/depot_stack_handle/depot_stack_handle_t] [aryabinin@virtuozzo.com: comment style fixes] Signed-off-by: Alexander Potapenko <glider@google.com> Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Andrey Konovalov <adech.fo@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Konstantin Serebryany <kcc@google.com> Cc: Dmitry Chernenkov <dmitryc@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-25 21:22:08 +00:00
#define DEPOT_HANDLE_BITS (sizeof(depot_stack_handle_t) * 8)
#define DEPOT_POOL_ORDER 2 /* Pool size order, 4 pages */
#define DEPOT_POOL_SIZE (1LL << (PAGE_SHIFT + DEPOT_POOL_ORDER))
#define DEPOT_STACK_ALIGN 4
#define DEPOT_OFFSET_BITS (DEPOT_POOL_ORDER + PAGE_SHIFT - DEPOT_STACK_ALIGN)
#define DEPOT_POOL_INDEX_BITS (DEPOT_HANDLE_BITS - DEPOT_OFFSET_BITS - \
STACK_DEPOT_EXTRA_BITS)
#define DEPOT_POOLS_CAP 8192
#define DEPOT_MAX_POOLS \
(((1LL << (DEPOT_POOL_INDEX_BITS)) < DEPOT_POOLS_CAP) ? \
(1LL << (DEPOT_POOL_INDEX_BITS)) : DEPOT_POOLS_CAP)
mm, kasan: stackdepot implementation. Enable stackdepot for SLAB Implement the stack depot and provide CONFIG_STACKDEPOT. Stack depot will allow KASAN store allocation/deallocation stack traces for memory chunks. The stack traces are stored in a hash table and referenced by handles which reside in the kasan_alloc_meta and kasan_free_meta structures in the allocated memory chunks. IRQ stack traces are cut below the IRQ entry point to avoid unnecessary duplication. Right now stackdepot support is only enabled in SLAB allocator. Once KASAN features in SLAB are on par with those in SLUB we can switch SLUB to stackdepot as well, thus removing the dependency on SLUB stack bookkeeping, which wastes a lot of memory. This patch is based on the "mm: kasan: stack depots" patch originally prepared by Dmitry Chernenkov. Joonsoo has said that he plans to reuse the stackdepot code for the mm/page_owner.c debugging facility. [akpm@linux-foundation.org: s/depot_stack_handle/depot_stack_handle_t] [aryabinin@virtuozzo.com: comment style fixes] Signed-off-by: Alexander Potapenko <glider@google.com> Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Andrey Konovalov <adech.fo@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Konstantin Serebryany <kcc@google.com> Cc: Dmitry Chernenkov <dmitryc@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-25 21:22:08 +00:00
/* Compact structure that stores a reference to a stack. */
mm, kasan: stackdepot implementation. Enable stackdepot for SLAB Implement the stack depot and provide CONFIG_STACKDEPOT. Stack depot will allow KASAN store allocation/deallocation stack traces for memory chunks. The stack traces are stored in a hash table and referenced by handles which reside in the kasan_alloc_meta and kasan_free_meta structures in the allocated memory chunks. IRQ stack traces are cut below the IRQ entry point to avoid unnecessary duplication. Right now stackdepot support is only enabled in SLAB allocator. Once KASAN features in SLAB are on par with those in SLUB we can switch SLUB to stackdepot as well, thus removing the dependency on SLUB stack bookkeeping, which wastes a lot of memory. This patch is based on the "mm: kasan: stack depots" patch originally prepared by Dmitry Chernenkov. Joonsoo has said that he plans to reuse the stackdepot code for the mm/page_owner.c debugging facility. [akpm@linux-foundation.org: s/depot_stack_handle/depot_stack_handle_t] [aryabinin@virtuozzo.com: comment style fixes] Signed-off-by: Alexander Potapenko <glider@google.com> Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Andrey Konovalov <adech.fo@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Konstantin Serebryany <kcc@google.com> Cc: Dmitry Chernenkov <dmitryc@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-25 21:22:08 +00:00
union handle_parts {
depot_stack_handle_t handle;
struct {
u32 pool_index : DEPOT_POOL_INDEX_BITS;
u32 offset : DEPOT_OFFSET_BITS;
u32 extra : STACK_DEPOT_EXTRA_BITS;
mm, kasan: stackdepot implementation. Enable stackdepot for SLAB Implement the stack depot and provide CONFIG_STACKDEPOT. Stack depot will allow KASAN store allocation/deallocation stack traces for memory chunks. The stack traces are stored in a hash table and referenced by handles which reside in the kasan_alloc_meta and kasan_free_meta structures in the allocated memory chunks. IRQ stack traces are cut below the IRQ entry point to avoid unnecessary duplication. Right now stackdepot support is only enabled in SLAB allocator. Once KASAN features in SLAB are on par with those in SLUB we can switch SLUB to stackdepot as well, thus removing the dependency on SLUB stack bookkeeping, which wastes a lot of memory. This patch is based on the "mm: kasan: stack depots" patch originally prepared by Dmitry Chernenkov. Joonsoo has said that he plans to reuse the stackdepot code for the mm/page_owner.c debugging facility. [akpm@linux-foundation.org: s/depot_stack_handle/depot_stack_handle_t] [aryabinin@virtuozzo.com: comment style fixes] Signed-off-by: Alexander Potapenko <glider@google.com> Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Andrey Konovalov <adech.fo@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Konstantin Serebryany <kcc@google.com> Cc: Dmitry Chernenkov <dmitryc@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-25 21:22:08 +00:00
};
};
struct stack_record {
struct list_head list; /* Links in hash table or freelist */
u32 hash; /* Hash in hash table */
u32 size; /* Number of stored frames */
mm, kasan: stackdepot implementation. Enable stackdepot for SLAB Implement the stack depot and provide CONFIG_STACKDEPOT. Stack depot will allow KASAN store allocation/deallocation stack traces for memory chunks. The stack traces are stored in a hash table and referenced by handles which reside in the kasan_alloc_meta and kasan_free_meta structures in the allocated memory chunks. IRQ stack traces are cut below the IRQ entry point to avoid unnecessary duplication. Right now stackdepot support is only enabled in SLAB allocator. Once KASAN features in SLAB are on par with those in SLUB we can switch SLUB to stackdepot as well, thus removing the dependency on SLUB stack bookkeeping, which wastes a lot of memory. This patch is based on the "mm: kasan: stack depots" patch originally prepared by Dmitry Chernenkov. Joonsoo has said that he plans to reuse the stackdepot code for the mm/page_owner.c debugging facility. [akpm@linux-foundation.org: s/depot_stack_handle/depot_stack_handle_t] [aryabinin@virtuozzo.com: comment style fixes] Signed-off-by: Alexander Potapenko <glider@google.com> Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Andrey Konovalov <adech.fo@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Konstantin Serebryany <kcc@google.com> Cc: Dmitry Chernenkov <dmitryc@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-25 21:22:08 +00:00
union handle_parts handle;
unsigned long entries[CONFIG_STACKDEPOT_MAX_FRAMES]; /* Frames */
mm, kasan: stackdepot implementation. Enable stackdepot for SLAB Implement the stack depot and provide CONFIG_STACKDEPOT. Stack depot will allow KASAN store allocation/deallocation stack traces for memory chunks. The stack traces are stored in a hash table and referenced by handles which reside in the kasan_alloc_meta and kasan_free_meta structures in the allocated memory chunks. IRQ stack traces are cut below the IRQ entry point to avoid unnecessary duplication. Right now stackdepot support is only enabled in SLAB allocator. Once KASAN features in SLAB are on par with those in SLUB we can switch SLUB to stackdepot as well, thus removing the dependency on SLUB stack bookkeeping, which wastes a lot of memory. This patch is based on the "mm: kasan: stack depots" patch originally prepared by Dmitry Chernenkov. Joonsoo has said that he plans to reuse the stackdepot code for the mm/page_owner.c debugging facility. [akpm@linux-foundation.org: s/depot_stack_handle/depot_stack_handle_t] [aryabinin@virtuozzo.com: comment style fixes] Signed-off-by: Alexander Potapenko <glider@google.com> Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Andrey Konovalov <adech.fo@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Konstantin Serebryany <kcc@google.com> Cc: Dmitry Chernenkov <dmitryc@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-25 21:22:08 +00:00
};
#define DEPOT_STACK_RECORD_SIZE \
ALIGN(sizeof(struct stack_record), 1 << DEPOT_STACK_ALIGN)
static bool stack_depot_disabled;
static bool __stack_depot_early_init_requested __initdata = IS_ENABLED(CONFIG_STACKDEPOT_ALWAYS_INIT);
lib/stackdepot: allow requesting early initialization dynamically Bugzilla: https://bugzilla.redhat.com/2120352 commit a5f1783be29adae15666fd803efd7d2979130869 Author: Vlastimil Babka <vbabka@suse.cz> Date: Wed Mar 2 12:02:22 2022 +0100 lib/stackdepot: allow requesting early initialization dynamically In a later patch we want to add stackdepot support for object owner tracking in slub caches, which is enabled by slub_debug boot parameter. This creates a bootstrap problem as some caches are created early in boot when slab_is_available() is false and thus stack_depot_init() tries to use memblock. But, as reported by Hyeonggon Yoo [1] we are already beyond memblock_free_all(). Ideally memblock allocation should fail, yet it succeeds, but later the system crashes, which is a separately handled issue. To resolve this boostrap issue in a robust way, this patch adds another way to request stack_depot_early_init(), which happens at a well-defined point of time. In addition to build-time CONFIG_STACKDEPOT_ALWAYS_INIT, code that's e.g. processing boot parameters (which happens early enough) can call a new function stack_depot_want_early_init(), which sets a flag that stack_depot_early_init() will check. In this patch we also convert page_owner to this approach. While it doesn't have the bootstrap issue as slub, it's also a functionality enabled by a boot param and can thus request stack_depot_early_init() with memblock allocation instead of later initialization with kvmalloc(). As suggested by Mike, make stack_depot_early_init() only attempt memblock allocation and stack_depot_init() only attempt kvmalloc(). Also change the latter to kvcalloc(). In both cases we can lose the explicit array zeroing, which the allocations do already. As suggested by Marco, provide empty implementations of the init functions for !CONFIG_STACKDEPOT builds to simplify the callers. [1] https://lore.kernel.org/all/YhnUcqyeMgCrWZbd@ip-172-31-19-208.ap-northeast-1.compute.internal/ Reported-by: Hyeonggon Yoo <42.hyeyoo@gmail.com> Suggested-by: Mike Rapoport <rppt@linux.ibm.com> Suggested-by: Marco Elver <elver@google.com> Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Reviewed-by: Marco Elver <elver@google.com> Reviewed-and-tested-by: Hyeonggon Yoo <42.hyeyoo@gmail.com> Reviewed-by: Mike Rapoport <rppt@linux.ibm.com> Acked-by: David Rientjes <rientjes@google.com> Signed-off-by: Chris von Recklinghausen <crecklin@redhat.com>
2022-10-12 11:09:41 +00:00
static bool __stack_depot_early_init_passed __initdata;
/* Use one hash table bucket per 16 KB of memory. */
#define STACK_HASH_TABLE_SCALE 14
/* Limit the number of buckets between 4K and 1M. */
#define STACK_BUCKET_NUMBER_ORDER_MIN 12
#define STACK_BUCKET_NUMBER_ORDER_MAX 20
/* Initial seed for jhash2. */
mm, kasan: stackdepot implementation. Enable stackdepot for SLAB Implement the stack depot and provide CONFIG_STACKDEPOT. Stack depot will allow KASAN store allocation/deallocation stack traces for memory chunks. The stack traces are stored in a hash table and referenced by handles which reside in the kasan_alloc_meta and kasan_free_meta structures in the allocated memory chunks. IRQ stack traces are cut below the IRQ entry point to avoid unnecessary duplication. Right now stackdepot support is only enabled in SLAB allocator. Once KASAN features in SLAB are on par with those in SLUB we can switch SLUB to stackdepot as well, thus removing the dependency on SLUB stack bookkeeping, which wastes a lot of memory. This patch is based on the "mm: kasan: stack depots" patch originally prepared by Dmitry Chernenkov. Joonsoo has said that he plans to reuse the stackdepot code for the mm/page_owner.c debugging facility. [akpm@linux-foundation.org: s/depot_stack_handle/depot_stack_handle_t] [aryabinin@virtuozzo.com: comment style fixes] Signed-off-by: Alexander Potapenko <glider@google.com> Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Andrey Konovalov <adech.fo@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Konstantin Serebryany <kcc@google.com> Cc: Dmitry Chernenkov <dmitryc@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-25 21:22:08 +00:00
#define STACK_HASH_SEED 0x9747b28c
/* Hash table of stored stack records. */
static struct list_head *stack_table;
/* Fixed order of the number of table buckets. Used when KASAN is enabled. */
static unsigned int stack_bucket_number_order;
/* Hash mask for indexing the table. */
lib/stackdepot: replace CONFIG_STACK_HASH_ORDER with automatic sizing JIRA: https://issues.redhat.com/browse/RHEL-28060 commit f9987921cb541b1187a648141a9048547ea89ffb Author: Vlastimil Babka <vbabka@suse.cz> Date: Mon, 20 Jun 2022 17:02:49 +0200 lib/stackdepot: replace CONFIG_STACK_HASH_ORDER with automatic sizing As Linus explained [1], setting the stackdepot hash table size as a config option is suboptimal, especially as stackdepot becomes a dependency of less "expert" subsystems than initially (e.g. DRM, networking, SLUB_DEBUG): : (a) it introduces a new compile-time question that isn't sane to ask : a regular user, but is now exposed to regular users. : (b) this by default uses 1MB of memory for a feature that didn't in : the past, so now if you have small machines you need to make sure you : make a special kernel config for them. Ideally we would employ rhashtable for fully automatic resizing, which should be feasible for many of the new users, but problematic for the original users with restricted context that call __stack_depot_save() with can_alloc == false, i.e. KASAN. However we can easily remove the config option and scale the hash table automatically with system memory. The STACK_HASH_MASK constant becomes stack_hash_mask variable and is used only in one mask operation, so the overhead should be negligible to none. For early allocation we can employ the existing alloc_large_system_hash() function and perform similar scaling for the late allocation. The existing limits of the config option (between 4k and 1M buckets) are preserved, and scaling factor is set to one bucket per 16kB memory so on 64bit the max 1M buckets (8MB memory) is achieved with 16GB system, while a 1GB system will use 512kB. Because KASAN is reported to need the maximum number of buckets even with smaller amounts of memory [2], set it as such when kasan_enabled(). If needed, the automatic scaling could be complemented with a boot-time kernel parameter, but it feels pointless to add it without a specific use case. [1] https://lore.kernel.org/all/CAHk-=wjC5nS+fnf6EzRD9yQRJApAhxx7gRB87ZV+pAWo9oVrTg@mail.gmail.com/ [2] https://lore.kernel.org/all/CACT4Y+Y4GZfXOru2z5tFPzFdaSUd+GFc6KVL=bsa0+1m197cQQ@mail.gmail.com/ Link: https://lkml.kernel.org/r/20220620150249.16814-1-vbabka@suse.cz Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Acked-by: Dmitry Vyukov <dvyukov@google.com> Cc: Marco Elver <elver@google.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Konovalov <andreyknvl@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Waiman Long <longman@redhat.com>
2024-03-05 17:04:07 +00:00
static unsigned int stack_hash_mask;
/* Array of memory regions that store stack records. */
static void *stack_pools[DEPOT_MAX_POOLS];
/* Newly allocated pool that is not yet added to stack_pools. */
static void *new_pool;
/* Number of pools in stack_pools. */
static int pools_num;
/* Freelist of stack records within stack_pools. */
static LIST_HEAD(free_stacks);
/*
* Stack depot tries to keep an extra pool allocated even before it runs out
* of space in the currently used pool. This flag marks whether this extra pool
* needs to be allocated. It has the value 0 when either an extra pool is not
* yet allocated or if the limit on the number of pools is reached.
*/
lib/stackdepot: use read/write lock JIRA: https://issues.redhat.com/browse/RHEL-28060 commit a6cd957021f2bbbe0f02e5c32389eb4c06aa97c8 Author: Andrey Konovalov <andreyknvl@gmail.com> Date: Mon, 20 Nov 2023 18:47:10 +0100 lib/stackdepot: use read/write lock Currently, stack depot uses the following locking scheme: 1. Lock-free accesses when looking up a stack record, which allows to have multiple users to look up records in parallel; 2. Spinlock for protecting the stack depot pools and the hash table when adding a new record. For implementing the eviction of stack traces from stack depot, the lock-free approach is not going to work anymore, as we will need to be able to also remove records from the hash table. Convert the spinlock into a read/write lock, and drop the atomic accesses, as they are no longer required. Looking up stack traces is now protected by the read lock and adding new records - by the write lock. One of the following patches will add a new function for evicting stack records, which will be protected by the write lock as well. With this change, multiple users can still look up records in parallel. This is preparatory patch for implementing the eviction of stack records from the stack depot. Link: https://lkml.kernel.org/r/9f81ffcc4bb422ebb6326a65a770bf1918634cbb.1700502145.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Reviewed-by: Alexander Potapenko <glider@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Evgenii Stepanov <eugenis@google.com> Cc: Marco Elver <elver@google.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Waiman Long <longman@redhat.com>
2024-03-06 14:35:07 +00:00
static bool new_pool_required = true;
/* Lock that protects the variables above. */
static DEFINE_RWLOCK(pool_rwlock);
static int __init disable_stack_depot(char *str)
{
lib/stackdepot: print disabled message only if truly disabled JIRA: https://issues.redhat.com/browse/RHEL-28060 commit 4d07a037231c985f8c990c9cf1c304bbe31bb764 Author: Andrey Konovalov <andreyknvl@gmail.com> Date: Mon, 20 Nov 2023 18:46:59 +0100 lib/stackdepot: print disabled message only if truly disabled Patch series "stackdepot: allow evicting stack traces", v4. Currently, the stack depot grows indefinitely until it reaches its capacity. Once that happens, the stack depot stops saving new stack traces. This creates a problem for using the stack depot for in-field testing and in production. For such uses, an ideal stack trace storage should: 1. Allow saving fresh stack traces on systems with a large uptime while limiting the amount of memory used to store the traces; 2. Have a low performance impact. Implementing #1 in the stack depot is impossible with the current keep-forever approach. This series targets to address that. Issue #2 is left to be addressed in a future series. This series changes the stack depot implementation to allow evicting unneeded stack traces from the stack depot. The users of the stack depot can do that via new stack_depot_save_flags(STACK_DEPOT_FLAG_GET) and stack_depot_put APIs. Internal changes to the stack depot code include: 1. Storing stack traces in fixed-frame-sized slots (vs precisely-sized slots in the current implementation); the slot size is controlled via CONFIG_STACKDEPOT_MAX_FRAMES (default: 64 frames); 2. Keeping available slots in a freelist (vs keeping an offset to the next free slot); 3. Using a read/write lock for synchronization (vs a lock-free approach combined with a spinlock). This series also integrates the eviction functionality into KASAN: the tag-based modes evict stack traces when the corresponding entry leaves the stack ring, and Generic KASAN evicts stack traces for objects once those leave the quarantine. With KASAN, despite wasting some space on rounding up the size of each stack record, the total memory consumed by stack depot gets saturated due to the eviction of irrelevant stack traces from the stack depot. With the tag-based KASAN modes, the average total amount of memory used for stack traces becomes ~0.5 MB (with the current default stack ring size of 32k entries and the default CONFIG_STACKDEPOT_MAX_FRAMES of 64). With Generic KASAN, the stack traces take up ~1 MB per 1 GB of RAM (as the quarantine's size depends on the amount of RAM). However, with KMSAN, the stack depot ends up using ~4x more memory per a stack trace than before. Thus, for KMSAN, the stack depot capacity is increased accordingly. KMSAN uses a lot of RAM for shadow memory anyway, so the increased stack depot memory usage will not make a significant difference. Other users of the stack depot do not save stack traces as often as KASAN and KMSAN. Thus, the increased memory usage is taken as an acceptable trade-off. In the future, these other users can take advantage of the eviction API to limit the memory waste. There is no measurable boot time performance impact of these changes for KASAN on x86-64. I haven't done any tests for arm64 modes (the stack depot without performance optimizations is not suitable for intended use of those anyway), but I expect a similar result. Obtaining and copying stack trace frames when saving them into stack depot is what takes the most time. This series does not yet provide a way to configure the maximum size of the stack depot externally (e.g. via a command-line parameter). This will be added in a separate series, possibly together with the performance improvement changes. This patch (of 22): Currently, if stack_depot_disable=off is passed to the kernel command-line after stack_depot_disable=on, stack depot prints a message that it is disabled, while it is actually enabled. Fix this by moving printing the disabled message to stack_depot_early_init. Place it before the __stack_depot_early_init_requested check, so that the message is printed even if early stack depot init has not been requested. Also drop the stack_table = NULL assignment from disable_stack_depot, as stack_table is NULL by default. Link: https://lkml.kernel.org/r/cover.1700502145.git.andreyknvl@google.com Link: https://lkml.kernel.org/r/73a25c5fff29f3357cd7a9330e85e09bc8da2cbe.1700502145.git.andreyknvl@google.com Fixes: e1fdc403349c ("lib: stackdepot: add support to disable stack depot") Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Reviewed-by: Marco Elver <elver@google.com> Cc: Alexander Potapenko <glider@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Evgenii Stepanov <eugenis@google.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Waiman Long <longman@redhat.com>
2024-03-05 17:04:21 +00:00
return kstrtobool(str, &stack_depot_disabled);
}
early_param("stack_depot_disable", disable_stack_depot);
void __init stack_depot_request_early_init(void)
lib/stackdepot: allow requesting early initialization dynamically Bugzilla: https://bugzilla.redhat.com/2120352 commit a5f1783be29adae15666fd803efd7d2979130869 Author: Vlastimil Babka <vbabka@suse.cz> Date: Wed Mar 2 12:02:22 2022 +0100 lib/stackdepot: allow requesting early initialization dynamically In a later patch we want to add stackdepot support for object owner tracking in slub caches, which is enabled by slub_debug boot parameter. This creates a bootstrap problem as some caches are created early in boot when slab_is_available() is false and thus stack_depot_init() tries to use memblock. But, as reported by Hyeonggon Yoo [1] we are already beyond memblock_free_all(). Ideally memblock allocation should fail, yet it succeeds, but later the system crashes, which is a separately handled issue. To resolve this boostrap issue in a robust way, this patch adds another way to request stack_depot_early_init(), which happens at a well-defined point of time. In addition to build-time CONFIG_STACKDEPOT_ALWAYS_INIT, code that's e.g. processing boot parameters (which happens early enough) can call a new function stack_depot_want_early_init(), which sets a flag that stack_depot_early_init() will check. In this patch we also convert page_owner to this approach. While it doesn't have the bootstrap issue as slub, it's also a functionality enabled by a boot param and can thus request stack_depot_early_init() with memblock allocation instead of later initialization with kvmalloc(). As suggested by Mike, make stack_depot_early_init() only attempt memblock allocation and stack_depot_init() only attempt kvmalloc(). Also change the latter to kvcalloc(). In both cases we can lose the explicit array zeroing, which the allocations do already. As suggested by Marco, provide empty implementations of the init functions for !CONFIG_STACKDEPOT builds to simplify the callers. [1] https://lore.kernel.org/all/YhnUcqyeMgCrWZbd@ip-172-31-19-208.ap-northeast-1.compute.internal/ Reported-by: Hyeonggon Yoo <42.hyeyoo@gmail.com> Suggested-by: Mike Rapoport <rppt@linux.ibm.com> Suggested-by: Marco Elver <elver@google.com> Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Reviewed-by: Marco Elver <elver@google.com> Reviewed-and-tested-by: Hyeonggon Yoo <42.hyeyoo@gmail.com> Reviewed-by: Mike Rapoport <rppt@linux.ibm.com> Acked-by: David Rientjes <rientjes@google.com> Signed-off-by: Chris von Recklinghausen <crecklin@redhat.com>
2022-10-12 11:09:41 +00:00
{
/* Too late to request early init now. */
lib/stackdepot: allow requesting early initialization dynamically Bugzilla: https://bugzilla.redhat.com/2120352 commit a5f1783be29adae15666fd803efd7d2979130869 Author: Vlastimil Babka <vbabka@suse.cz> Date: Wed Mar 2 12:02:22 2022 +0100 lib/stackdepot: allow requesting early initialization dynamically In a later patch we want to add stackdepot support for object owner tracking in slub caches, which is enabled by slub_debug boot parameter. This creates a bootstrap problem as some caches are created early in boot when slab_is_available() is false and thus stack_depot_init() tries to use memblock. But, as reported by Hyeonggon Yoo [1] we are already beyond memblock_free_all(). Ideally memblock allocation should fail, yet it succeeds, but later the system crashes, which is a separately handled issue. To resolve this boostrap issue in a robust way, this patch adds another way to request stack_depot_early_init(), which happens at a well-defined point of time. In addition to build-time CONFIG_STACKDEPOT_ALWAYS_INIT, code that's e.g. processing boot parameters (which happens early enough) can call a new function stack_depot_want_early_init(), which sets a flag that stack_depot_early_init() will check. In this patch we also convert page_owner to this approach. While it doesn't have the bootstrap issue as slub, it's also a functionality enabled by a boot param and can thus request stack_depot_early_init() with memblock allocation instead of later initialization with kvmalloc(). As suggested by Mike, make stack_depot_early_init() only attempt memblock allocation and stack_depot_init() only attempt kvmalloc(). Also change the latter to kvcalloc(). In both cases we can lose the explicit array zeroing, which the allocations do already. As suggested by Marco, provide empty implementations of the init functions for !CONFIG_STACKDEPOT builds to simplify the callers. [1] https://lore.kernel.org/all/YhnUcqyeMgCrWZbd@ip-172-31-19-208.ap-northeast-1.compute.internal/ Reported-by: Hyeonggon Yoo <42.hyeyoo@gmail.com> Suggested-by: Mike Rapoport <rppt@linux.ibm.com> Suggested-by: Marco Elver <elver@google.com> Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Reviewed-by: Marco Elver <elver@google.com> Reviewed-and-tested-by: Hyeonggon Yoo <42.hyeyoo@gmail.com> Reviewed-by: Mike Rapoport <rppt@linux.ibm.com> Acked-by: David Rientjes <rientjes@google.com> Signed-off-by: Chris von Recklinghausen <crecklin@redhat.com>
2022-10-12 11:09:41 +00:00
WARN_ON(__stack_depot_early_init_passed);
__stack_depot_early_init_requested = true;
lib/stackdepot: allow requesting early initialization dynamically Bugzilla: https://bugzilla.redhat.com/2120352 commit a5f1783be29adae15666fd803efd7d2979130869 Author: Vlastimil Babka <vbabka@suse.cz> Date: Wed Mar 2 12:02:22 2022 +0100 lib/stackdepot: allow requesting early initialization dynamically In a later patch we want to add stackdepot support for object owner tracking in slub caches, which is enabled by slub_debug boot parameter. This creates a bootstrap problem as some caches are created early in boot when slab_is_available() is false and thus stack_depot_init() tries to use memblock. But, as reported by Hyeonggon Yoo [1] we are already beyond memblock_free_all(). Ideally memblock allocation should fail, yet it succeeds, but later the system crashes, which is a separately handled issue. To resolve this boostrap issue in a robust way, this patch adds another way to request stack_depot_early_init(), which happens at a well-defined point of time. In addition to build-time CONFIG_STACKDEPOT_ALWAYS_INIT, code that's e.g. processing boot parameters (which happens early enough) can call a new function stack_depot_want_early_init(), which sets a flag that stack_depot_early_init() will check. In this patch we also convert page_owner to this approach. While it doesn't have the bootstrap issue as slub, it's also a functionality enabled by a boot param and can thus request stack_depot_early_init() with memblock allocation instead of later initialization with kvmalloc(). As suggested by Mike, make stack_depot_early_init() only attempt memblock allocation and stack_depot_init() only attempt kvmalloc(). Also change the latter to kvcalloc(). In both cases we can lose the explicit array zeroing, which the allocations do already. As suggested by Marco, provide empty implementations of the init functions for !CONFIG_STACKDEPOT builds to simplify the callers. [1] https://lore.kernel.org/all/YhnUcqyeMgCrWZbd@ip-172-31-19-208.ap-northeast-1.compute.internal/ Reported-by: Hyeonggon Yoo <42.hyeyoo@gmail.com> Suggested-by: Mike Rapoport <rppt@linux.ibm.com> Suggested-by: Marco Elver <elver@google.com> Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Reviewed-by: Marco Elver <elver@google.com> Reviewed-and-tested-by: Hyeonggon Yoo <42.hyeyoo@gmail.com> Reviewed-by: Mike Rapoport <rppt@linux.ibm.com> Acked-by: David Rientjes <rientjes@google.com> Signed-off-by: Chris von Recklinghausen <crecklin@redhat.com>
2022-10-12 11:09:41 +00:00
}
/* Initialize list_head's within the hash table. */
static void init_stack_table(unsigned long entries)
{
unsigned long i;
for (i = 0; i < entries; i++)
INIT_LIST_HEAD(&stack_table[i]);
}
/* Allocates a hash table via memblock. Can only be used during early boot. */
lib/stackdepot: allow requesting early initialization dynamically Bugzilla: https://bugzilla.redhat.com/2120352 commit a5f1783be29adae15666fd803efd7d2979130869 Author: Vlastimil Babka <vbabka@suse.cz> Date: Wed Mar 2 12:02:22 2022 +0100 lib/stackdepot: allow requesting early initialization dynamically In a later patch we want to add stackdepot support for object owner tracking in slub caches, which is enabled by slub_debug boot parameter. This creates a bootstrap problem as some caches are created early in boot when slab_is_available() is false and thus stack_depot_init() tries to use memblock. But, as reported by Hyeonggon Yoo [1] we are already beyond memblock_free_all(). Ideally memblock allocation should fail, yet it succeeds, but later the system crashes, which is a separately handled issue. To resolve this boostrap issue in a robust way, this patch adds another way to request stack_depot_early_init(), which happens at a well-defined point of time. In addition to build-time CONFIG_STACKDEPOT_ALWAYS_INIT, code that's e.g. processing boot parameters (which happens early enough) can call a new function stack_depot_want_early_init(), which sets a flag that stack_depot_early_init() will check. In this patch we also convert page_owner to this approach. While it doesn't have the bootstrap issue as slub, it's also a functionality enabled by a boot param and can thus request stack_depot_early_init() with memblock allocation instead of later initialization with kvmalloc(). As suggested by Mike, make stack_depot_early_init() only attempt memblock allocation and stack_depot_init() only attempt kvmalloc(). Also change the latter to kvcalloc(). In both cases we can lose the explicit array zeroing, which the allocations do already. As suggested by Marco, provide empty implementations of the init functions for !CONFIG_STACKDEPOT builds to simplify the callers. [1] https://lore.kernel.org/all/YhnUcqyeMgCrWZbd@ip-172-31-19-208.ap-northeast-1.compute.internal/ Reported-by: Hyeonggon Yoo <42.hyeyoo@gmail.com> Suggested-by: Mike Rapoport <rppt@linux.ibm.com> Suggested-by: Marco Elver <elver@google.com> Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Reviewed-by: Marco Elver <elver@google.com> Reviewed-and-tested-by: Hyeonggon Yoo <42.hyeyoo@gmail.com> Reviewed-by: Mike Rapoport <rppt@linux.ibm.com> Acked-by: David Rientjes <rientjes@google.com> Signed-off-by: Chris von Recklinghausen <crecklin@redhat.com>
2022-10-12 11:09:41 +00:00
int __init stack_depot_early_init(void)
{
lib/stackdepot: replace CONFIG_STACK_HASH_ORDER with automatic sizing JIRA: https://issues.redhat.com/browse/RHEL-28060 commit f9987921cb541b1187a648141a9048547ea89ffb Author: Vlastimil Babka <vbabka@suse.cz> Date: Mon, 20 Jun 2022 17:02:49 +0200 lib/stackdepot: replace CONFIG_STACK_HASH_ORDER with automatic sizing As Linus explained [1], setting the stackdepot hash table size as a config option is suboptimal, especially as stackdepot becomes a dependency of less "expert" subsystems than initially (e.g. DRM, networking, SLUB_DEBUG): : (a) it introduces a new compile-time question that isn't sane to ask : a regular user, but is now exposed to regular users. : (b) this by default uses 1MB of memory for a feature that didn't in : the past, so now if you have small machines you need to make sure you : make a special kernel config for them. Ideally we would employ rhashtable for fully automatic resizing, which should be feasible for many of the new users, but problematic for the original users with restricted context that call __stack_depot_save() with can_alloc == false, i.e. KASAN. However we can easily remove the config option and scale the hash table automatically with system memory. The STACK_HASH_MASK constant becomes stack_hash_mask variable and is used only in one mask operation, so the overhead should be negligible to none. For early allocation we can employ the existing alloc_large_system_hash() function and perform similar scaling for the late allocation. The existing limits of the config option (between 4k and 1M buckets) are preserved, and scaling factor is set to one bucket per 16kB memory so on 64bit the max 1M buckets (8MB memory) is achieved with 16GB system, while a 1GB system will use 512kB. Because KASAN is reported to need the maximum number of buckets even with smaller amounts of memory [2], set it as such when kasan_enabled(). If needed, the automatic scaling could be complemented with a boot-time kernel parameter, but it feels pointless to add it without a specific use case. [1] https://lore.kernel.org/all/CAHk-=wjC5nS+fnf6EzRD9yQRJApAhxx7gRB87ZV+pAWo9oVrTg@mail.gmail.com/ [2] https://lore.kernel.org/all/CACT4Y+Y4GZfXOru2z5tFPzFdaSUd+GFc6KVL=bsa0+1m197cQQ@mail.gmail.com/ Link: https://lkml.kernel.org/r/20220620150249.16814-1-vbabka@suse.cz Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Acked-by: Dmitry Vyukov <dvyukov@google.com> Cc: Marco Elver <elver@google.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Konovalov <andreyknvl@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Waiman Long <longman@redhat.com>
2024-03-05 17:04:07 +00:00
unsigned long entries = 0;
lib/stackdepot: allow requesting early initialization dynamically Bugzilla: https://bugzilla.redhat.com/2120352 commit a5f1783be29adae15666fd803efd7d2979130869 Author: Vlastimil Babka <vbabka@suse.cz> Date: Wed Mar 2 12:02:22 2022 +0100 lib/stackdepot: allow requesting early initialization dynamically In a later patch we want to add stackdepot support for object owner tracking in slub caches, which is enabled by slub_debug boot parameter. This creates a bootstrap problem as some caches are created early in boot when slab_is_available() is false and thus stack_depot_init() tries to use memblock. But, as reported by Hyeonggon Yoo [1] we are already beyond memblock_free_all(). Ideally memblock allocation should fail, yet it succeeds, but later the system crashes, which is a separately handled issue. To resolve this boostrap issue in a robust way, this patch adds another way to request stack_depot_early_init(), which happens at a well-defined point of time. In addition to build-time CONFIG_STACKDEPOT_ALWAYS_INIT, code that's e.g. processing boot parameters (which happens early enough) can call a new function stack_depot_want_early_init(), which sets a flag that stack_depot_early_init() will check. In this patch we also convert page_owner to this approach. While it doesn't have the bootstrap issue as slub, it's also a functionality enabled by a boot param and can thus request stack_depot_early_init() with memblock allocation instead of later initialization with kvmalloc(). As suggested by Mike, make stack_depot_early_init() only attempt memblock allocation and stack_depot_init() only attempt kvmalloc(). Also change the latter to kvcalloc(). In both cases we can lose the explicit array zeroing, which the allocations do already. As suggested by Marco, provide empty implementations of the init functions for !CONFIG_STACKDEPOT builds to simplify the callers. [1] https://lore.kernel.org/all/YhnUcqyeMgCrWZbd@ip-172-31-19-208.ap-northeast-1.compute.internal/ Reported-by: Hyeonggon Yoo <42.hyeyoo@gmail.com> Suggested-by: Mike Rapoport <rppt@linux.ibm.com> Suggested-by: Marco Elver <elver@google.com> Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Reviewed-by: Marco Elver <elver@google.com> Reviewed-and-tested-by: Hyeonggon Yoo <42.hyeyoo@gmail.com> Reviewed-by: Mike Rapoport <rppt@linux.ibm.com> Acked-by: David Rientjes <rientjes@google.com> Signed-off-by: Chris von Recklinghausen <crecklin@redhat.com>
2022-10-12 11:09:41 +00:00
/* This function must be called only once, from mm_init(). */
lib/stackdepot: allow requesting early initialization dynamically Bugzilla: https://bugzilla.redhat.com/2120352 commit a5f1783be29adae15666fd803efd7d2979130869 Author: Vlastimil Babka <vbabka@suse.cz> Date: Wed Mar 2 12:02:22 2022 +0100 lib/stackdepot: allow requesting early initialization dynamically In a later patch we want to add stackdepot support for object owner tracking in slub caches, which is enabled by slub_debug boot parameter. This creates a bootstrap problem as some caches are created early in boot when slab_is_available() is false and thus stack_depot_init() tries to use memblock. But, as reported by Hyeonggon Yoo [1] we are already beyond memblock_free_all(). Ideally memblock allocation should fail, yet it succeeds, but later the system crashes, which is a separately handled issue. To resolve this boostrap issue in a robust way, this patch adds another way to request stack_depot_early_init(), which happens at a well-defined point of time. In addition to build-time CONFIG_STACKDEPOT_ALWAYS_INIT, code that's e.g. processing boot parameters (which happens early enough) can call a new function stack_depot_want_early_init(), which sets a flag that stack_depot_early_init() will check. In this patch we also convert page_owner to this approach. While it doesn't have the bootstrap issue as slub, it's also a functionality enabled by a boot param and can thus request stack_depot_early_init() with memblock allocation instead of later initialization with kvmalloc(). As suggested by Mike, make stack_depot_early_init() only attempt memblock allocation and stack_depot_init() only attempt kvmalloc(). Also change the latter to kvcalloc(). In both cases we can lose the explicit array zeroing, which the allocations do already. As suggested by Marco, provide empty implementations of the init functions for !CONFIG_STACKDEPOT builds to simplify the callers. [1] https://lore.kernel.org/all/YhnUcqyeMgCrWZbd@ip-172-31-19-208.ap-northeast-1.compute.internal/ Reported-by: Hyeonggon Yoo <42.hyeyoo@gmail.com> Suggested-by: Mike Rapoport <rppt@linux.ibm.com> Suggested-by: Marco Elver <elver@google.com> Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Reviewed-by: Marco Elver <elver@google.com> Reviewed-and-tested-by: Hyeonggon Yoo <42.hyeyoo@gmail.com> Reviewed-by: Mike Rapoport <rppt@linux.ibm.com> Acked-by: David Rientjes <rientjes@google.com> Signed-off-by: Chris von Recklinghausen <crecklin@redhat.com>
2022-10-12 11:09:41 +00:00
if (WARN_ON(__stack_depot_early_init_passed))
return 0;
__stack_depot_early_init_passed = true;
lib/stackdepot: print disabled message only if truly disabled JIRA: https://issues.redhat.com/browse/RHEL-28060 commit 4d07a037231c985f8c990c9cf1c304bbe31bb764 Author: Andrey Konovalov <andreyknvl@gmail.com> Date: Mon, 20 Nov 2023 18:46:59 +0100 lib/stackdepot: print disabled message only if truly disabled Patch series "stackdepot: allow evicting stack traces", v4. Currently, the stack depot grows indefinitely until it reaches its capacity. Once that happens, the stack depot stops saving new stack traces. This creates a problem for using the stack depot for in-field testing and in production. For such uses, an ideal stack trace storage should: 1. Allow saving fresh stack traces on systems with a large uptime while limiting the amount of memory used to store the traces; 2. Have a low performance impact. Implementing #1 in the stack depot is impossible with the current keep-forever approach. This series targets to address that. Issue #2 is left to be addressed in a future series. This series changes the stack depot implementation to allow evicting unneeded stack traces from the stack depot. The users of the stack depot can do that via new stack_depot_save_flags(STACK_DEPOT_FLAG_GET) and stack_depot_put APIs. Internal changes to the stack depot code include: 1. Storing stack traces in fixed-frame-sized slots (vs precisely-sized slots in the current implementation); the slot size is controlled via CONFIG_STACKDEPOT_MAX_FRAMES (default: 64 frames); 2. Keeping available slots in a freelist (vs keeping an offset to the next free slot); 3. Using a read/write lock for synchronization (vs a lock-free approach combined with a spinlock). This series also integrates the eviction functionality into KASAN: the tag-based modes evict stack traces when the corresponding entry leaves the stack ring, and Generic KASAN evicts stack traces for objects once those leave the quarantine. With KASAN, despite wasting some space on rounding up the size of each stack record, the total memory consumed by stack depot gets saturated due to the eviction of irrelevant stack traces from the stack depot. With the tag-based KASAN modes, the average total amount of memory used for stack traces becomes ~0.5 MB (with the current default stack ring size of 32k entries and the default CONFIG_STACKDEPOT_MAX_FRAMES of 64). With Generic KASAN, the stack traces take up ~1 MB per 1 GB of RAM (as the quarantine's size depends on the amount of RAM). However, with KMSAN, the stack depot ends up using ~4x more memory per a stack trace than before. Thus, for KMSAN, the stack depot capacity is increased accordingly. KMSAN uses a lot of RAM for shadow memory anyway, so the increased stack depot memory usage will not make a significant difference. Other users of the stack depot do not save stack traces as often as KASAN and KMSAN. Thus, the increased memory usage is taken as an acceptable trade-off. In the future, these other users can take advantage of the eviction API to limit the memory waste. There is no measurable boot time performance impact of these changes for KASAN on x86-64. I haven't done any tests for arm64 modes (the stack depot without performance optimizations is not suitable for intended use of those anyway), but I expect a similar result. Obtaining and copying stack trace frames when saving them into stack depot is what takes the most time. This series does not yet provide a way to configure the maximum size of the stack depot externally (e.g. via a command-line parameter). This will be added in a separate series, possibly together with the performance improvement changes. This patch (of 22): Currently, if stack_depot_disable=off is passed to the kernel command-line after stack_depot_disable=on, stack depot prints a message that it is disabled, while it is actually enabled. Fix this by moving printing the disabled message to stack_depot_early_init. Place it before the __stack_depot_early_init_requested check, so that the message is printed even if early stack depot init has not been requested. Also drop the stack_table = NULL assignment from disable_stack_depot, as stack_table is NULL by default. Link: https://lkml.kernel.org/r/cover.1700502145.git.andreyknvl@google.com Link: https://lkml.kernel.org/r/73a25c5fff29f3357cd7a9330e85e09bc8da2cbe.1700502145.git.andreyknvl@google.com Fixes: e1fdc403349c ("lib: stackdepot: add support to disable stack depot") Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Reviewed-by: Marco Elver <elver@google.com> Cc: Alexander Potapenko <glider@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Evgenii Stepanov <eugenis@google.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Waiman Long <longman@redhat.com>
2024-03-05 17:04:21 +00:00
/*
* Print disabled message even if early init has not been requested:
* stack_depot_init() will not print one.
*/
if (stack_depot_disabled) {
pr_info("disabled\n");
return 0;
}
/*
* If KASAN is enabled, use the maximum order: KASAN is frequently used
* in fuzzing scenarios, which leads to a large number of different
* stack traces being stored in stack depot.
*/
if (kasan_enabled() && !stack_bucket_number_order)
stack_bucket_number_order = STACK_BUCKET_NUMBER_ORDER_MAX;
lib/stackdepot: replace CONFIG_STACK_HASH_ORDER with automatic sizing JIRA: https://issues.redhat.com/browse/RHEL-28060 commit f9987921cb541b1187a648141a9048547ea89ffb Author: Vlastimil Babka <vbabka@suse.cz> Date: Mon, 20 Jun 2022 17:02:49 +0200 lib/stackdepot: replace CONFIG_STACK_HASH_ORDER with automatic sizing As Linus explained [1], setting the stackdepot hash table size as a config option is suboptimal, especially as stackdepot becomes a dependency of less "expert" subsystems than initially (e.g. DRM, networking, SLUB_DEBUG): : (a) it introduces a new compile-time question that isn't sane to ask : a regular user, but is now exposed to regular users. : (b) this by default uses 1MB of memory for a feature that didn't in : the past, so now if you have small machines you need to make sure you : make a special kernel config for them. Ideally we would employ rhashtable for fully automatic resizing, which should be feasible for many of the new users, but problematic for the original users with restricted context that call __stack_depot_save() with can_alloc == false, i.e. KASAN. However we can easily remove the config option and scale the hash table automatically with system memory. The STACK_HASH_MASK constant becomes stack_hash_mask variable and is used only in one mask operation, so the overhead should be negligible to none. For early allocation we can employ the existing alloc_large_system_hash() function and perform similar scaling for the late allocation. The existing limits of the config option (between 4k and 1M buckets) are preserved, and scaling factor is set to one bucket per 16kB memory so on 64bit the max 1M buckets (8MB memory) is achieved with 16GB system, while a 1GB system will use 512kB. Because KASAN is reported to need the maximum number of buckets even with smaller amounts of memory [2], set it as such when kasan_enabled(). If needed, the automatic scaling could be complemented with a boot-time kernel parameter, but it feels pointless to add it without a specific use case. [1] https://lore.kernel.org/all/CAHk-=wjC5nS+fnf6EzRD9yQRJApAhxx7gRB87ZV+pAWo9oVrTg@mail.gmail.com/ [2] https://lore.kernel.org/all/CACT4Y+Y4GZfXOru2z5tFPzFdaSUd+GFc6KVL=bsa0+1m197cQQ@mail.gmail.com/ Link: https://lkml.kernel.org/r/20220620150249.16814-1-vbabka@suse.cz Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Acked-by: Dmitry Vyukov <dvyukov@google.com> Cc: Marco Elver <elver@google.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Konovalov <andreyknvl@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Waiman Long <longman@redhat.com>
2024-03-05 17:04:07 +00:00
lib/stackdepot: print disabled message only if truly disabled JIRA: https://issues.redhat.com/browse/RHEL-28060 commit 4d07a037231c985f8c990c9cf1c304bbe31bb764 Author: Andrey Konovalov <andreyknvl@gmail.com> Date: Mon, 20 Nov 2023 18:46:59 +0100 lib/stackdepot: print disabled message only if truly disabled Patch series "stackdepot: allow evicting stack traces", v4. Currently, the stack depot grows indefinitely until it reaches its capacity. Once that happens, the stack depot stops saving new stack traces. This creates a problem for using the stack depot for in-field testing and in production. For such uses, an ideal stack trace storage should: 1. Allow saving fresh stack traces on systems with a large uptime while limiting the amount of memory used to store the traces; 2. Have a low performance impact. Implementing #1 in the stack depot is impossible with the current keep-forever approach. This series targets to address that. Issue #2 is left to be addressed in a future series. This series changes the stack depot implementation to allow evicting unneeded stack traces from the stack depot. The users of the stack depot can do that via new stack_depot_save_flags(STACK_DEPOT_FLAG_GET) and stack_depot_put APIs. Internal changes to the stack depot code include: 1. Storing stack traces in fixed-frame-sized slots (vs precisely-sized slots in the current implementation); the slot size is controlled via CONFIG_STACKDEPOT_MAX_FRAMES (default: 64 frames); 2. Keeping available slots in a freelist (vs keeping an offset to the next free slot); 3. Using a read/write lock for synchronization (vs a lock-free approach combined with a spinlock). This series also integrates the eviction functionality into KASAN: the tag-based modes evict stack traces when the corresponding entry leaves the stack ring, and Generic KASAN evicts stack traces for objects once those leave the quarantine. With KASAN, despite wasting some space on rounding up the size of each stack record, the total memory consumed by stack depot gets saturated due to the eviction of irrelevant stack traces from the stack depot. With the tag-based KASAN modes, the average total amount of memory used for stack traces becomes ~0.5 MB (with the current default stack ring size of 32k entries and the default CONFIG_STACKDEPOT_MAX_FRAMES of 64). With Generic KASAN, the stack traces take up ~1 MB per 1 GB of RAM (as the quarantine's size depends on the amount of RAM). However, with KMSAN, the stack depot ends up using ~4x more memory per a stack trace than before. Thus, for KMSAN, the stack depot capacity is increased accordingly. KMSAN uses a lot of RAM for shadow memory anyway, so the increased stack depot memory usage will not make a significant difference. Other users of the stack depot do not save stack traces as often as KASAN and KMSAN. Thus, the increased memory usage is taken as an acceptable trade-off. In the future, these other users can take advantage of the eviction API to limit the memory waste. There is no measurable boot time performance impact of these changes for KASAN on x86-64. I haven't done any tests for arm64 modes (the stack depot without performance optimizations is not suitable for intended use of those anyway), but I expect a similar result. Obtaining and copying stack trace frames when saving them into stack depot is what takes the most time. This series does not yet provide a way to configure the maximum size of the stack depot externally (e.g. via a command-line parameter). This will be added in a separate series, possibly together with the performance improvement changes. This patch (of 22): Currently, if stack_depot_disable=off is passed to the kernel command-line after stack_depot_disable=on, stack depot prints a message that it is disabled, while it is actually enabled. Fix this by moving printing the disabled message to stack_depot_early_init. Place it before the __stack_depot_early_init_requested check, so that the message is printed even if early stack depot init has not been requested. Also drop the stack_table = NULL assignment from disable_stack_depot, as stack_table is NULL by default. Link: https://lkml.kernel.org/r/cover.1700502145.git.andreyknvl@google.com Link: https://lkml.kernel.org/r/73a25c5fff29f3357cd7a9330e85e09bc8da2cbe.1700502145.git.andreyknvl@google.com Fixes: e1fdc403349c ("lib: stackdepot: add support to disable stack depot") Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Reviewed-by: Marco Elver <elver@google.com> Cc: Alexander Potapenko <glider@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Evgenii Stepanov <eugenis@google.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Waiman Long <longman@redhat.com>
2024-03-05 17:04:21 +00:00
/*
* Check if early init has been requested after setting
* stack_bucket_number_order: stack_depot_init() uses its value.
*/
if (!__stack_depot_early_init_requested)
lib/stackdepot: allow requesting early initialization dynamically Bugzilla: https://bugzilla.redhat.com/2120352 commit a5f1783be29adae15666fd803efd7d2979130869 Author: Vlastimil Babka <vbabka@suse.cz> Date: Wed Mar 2 12:02:22 2022 +0100 lib/stackdepot: allow requesting early initialization dynamically In a later patch we want to add stackdepot support for object owner tracking in slub caches, which is enabled by slub_debug boot parameter. This creates a bootstrap problem as some caches are created early in boot when slab_is_available() is false and thus stack_depot_init() tries to use memblock. But, as reported by Hyeonggon Yoo [1] we are already beyond memblock_free_all(). Ideally memblock allocation should fail, yet it succeeds, but later the system crashes, which is a separately handled issue. To resolve this boostrap issue in a robust way, this patch adds another way to request stack_depot_early_init(), which happens at a well-defined point of time. In addition to build-time CONFIG_STACKDEPOT_ALWAYS_INIT, code that's e.g. processing boot parameters (which happens early enough) can call a new function stack_depot_want_early_init(), which sets a flag that stack_depot_early_init() will check. In this patch we also convert page_owner to this approach. While it doesn't have the bootstrap issue as slub, it's also a functionality enabled by a boot param and can thus request stack_depot_early_init() with memblock allocation instead of later initialization with kvmalloc(). As suggested by Mike, make stack_depot_early_init() only attempt memblock allocation and stack_depot_init() only attempt kvmalloc(). Also change the latter to kvcalloc(). In both cases we can lose the explicit array zeroing, which the allocations do already. As suggested by Marco, provide empty implementations of the init functions for !CONFIG_STACKDEPOT builds to simplify the callers. [1] https://lore.kernel.org/all/YhnUcqyeMgCrWZbd@ip-172-31-19-208.ap-northeast-1.compute.internal/ Reported-by: Hyeonggon Yoo <42.hyeyoo@gmail.com> Suggested-by: Mike Rapoport <rppt@linux.ibm.com> Suggested-by: Marco Elver <elver@google.com> Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Reviewed-by: Marco Elver <elver@google.com> Reviewed-and-tested-by: Hyeonggon Yoo <42.hyeyoo@gmail.com> Reviewed-by: Mike Rapoport <rppt@linux.ibm.com> Acked-by: David Rientjes <rientjes@google.com> Signed-off-by: Chris von Recklinghausen <crecklin@redhat.com>
2022-10-12 11:09:41 +00:00
return 0;
/*
* If stack_bucket_number_order is not set, leave entries as 0 to rely
* on the automatic calculations performed by alloc_large_system_hash().
*/
if (stack_bucket_number_order)
entries = 1UL << stack_bucket_number_order;
pr_info("allocating hash table via alloc_large_system_hash\n");
lib/stackdepot: replace CONFIG_STACK_HASH_ORDER with automatic sizing JIRA: https://issues.redhat.com/browse/RHEL-28060 commit f9987921cb541b1187a648141a9048547ea89ffb Author: Vlastimil Babka <vbabka@suse.cz> Date: Mon, 20 Jun 2022 17:02:49 +0200 lib/stackdepot: replace CONFIG_STACK_HASH_ORDER with automatic sizing As Linus explained [1], setting the stackdepot hash table size as a config option is suboptimal, especially as stackdepot becomes a dependency of less "expert" subsystems than initially (e.g. DRM, networking, SLUB_DEBUG): : (a) it introduces a new compile-time question that isn't sane to ask : a regular user, but is now exposed to regular users. : (b) this by default uses 1MB of memory for a feature that didn't in : the past, so now if you have small machines you need to make sure you : make a special kernel config for them. Ideally we would employ rhashtable for fully automatic resizing, which should be feasible for many of the new users, but problematic for the original users with restricted context that call __stack_depot_save() with can_alloc == false, i.e. KASAN. However we can easily remove the config option and scale the hash table automatically with system memory. The STACK_HASH_MASK constant becomes stack_hash_mask variable and is used only in one mask operation, so the overhead should be negligible to none. For early allocation we can employ the existing alloc_large_system_hash() function and perform similar scaling for the late allocation. The existing limits of the config option (between 4k and 1M buckets) are preserved, and scaling factor is set to one bucket per 16kB memory so on 64bit the max 1M buckets (8MB memory) is achieved with 16GB system, while a 1GB system will use 512kB. Because KASAN is reported to need the maximum number of buckets even with smaller amounts of memory [2], set it as such when kasan_enabled(). If needed, the automatic scaling could be complemented with a boot-time kernel parameter, but it feels pointless to add it without a specific use case. [1] https://lore.kernel.org/all/CAHk-=wjC5nS+fnf6EzRD9yQRJApAhxx7gRB87ZV+pAWo9oVrTg@mail.gmail.com/ [2] https://lore.kernel.org/all/CACT4Y+Y4GZfXOru2z5tFPzFdaSUd+GFc6KVL=bsa0+1m197cQQ@mail.gmail.com/ Link: https://lkml.kernel.org/r/20220620150249.16814-1-vbabka@suse.cz Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Acked-by: Dmitry Vyukov <dvyukov@google.com> Cc: Marco Elver <elver@google.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Konovalov <andreyknvl@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Waiman Long <longman@redhat.com>
2024-03-05 17:04:07 +00:00
stack_table = alloc_large_system_hash("stackdepot",
sizeof(struct list_head),
lib/stackdepot: replace CONFIG_STACK_HASH_ORDER with automatic sizing JIRA: https://issues.redhat.com/browse/RHEL-28060 commit f9987921cb541b1187a648141a9048547ea89ffb Author: Vlastimil Babka <vbabka@suse.cz> Date: Mon, 20 Jun 2022 17:02:49 +0200 lib/stackdepot: replace CONFIG_STACK_HASH_ORDER with automatic sizing As Linus explained [1], setting the stackdepot hash table size as a config option is suboptimal, especially as stackdepot becomes a dependency of less "expert" subsystems than initially (e.g. DRM, networking, SLUB_DEBUG): : (a) it introduces a new compile-time question that isn't sane to ask : a regular user, but is now exposed to regular users. : (b) this by default uses 1MB of memory for a feature that didn't in : the past, so now if you have small machines you need to make sure you : make a special kernel config for them. Ideally we would employ rhashtable for fully automatic resizing, which should be feasible for many of the new users, but problematic for the original users with restricted context that call __stack_depot_save() with can_alloc == false, i.e. KASAN. However we can easily remove the config option and scale the hash table automatically with system memory. The STACK_HASH_MASK constant becomes stack_hash_mask variable and is used only in one mask operation, so the overhead should be negligible to none. For early allocation we can employ the existing alloc_large_system_hash() function and perform similar scaling for the late allocation. The existing limits of the config option (between 4k and 1M buckets) are preserved, and scaling factor is set to one bucket per 16kB memory so on 64bit the max 1M buckets (8MB memory) is achieved with 16GB system, while a 1GB system will use 512kB. Because KASAN is reported to need the maximum number of buckets even with smaller amounts of memory [2], set it as such when kasan_enabled(). If needed, the automatic scaling could be complemented with a boot-time kernel parameter, but it feels pointless to add it without a specific use case. [1] https://lore.kernel.org/all/CAHk-=wjC5nS+fnf6EzRD9yQRJApAhxx7gRB87ZV+pAWo9oVrTg@mail.gmail.com/ [2] https://lore.kernel.org/all/CACT4Y+Y4GZfXOru2z5tFPzFdaSUd+GFc6KVL=bsa0+1m197cQQ@mail.gmail.com/ Link: https://lkml.kernel.org/r/20220620150249.16814-1-vbabka@suse.cz Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Acked-by: Dmitry Vyukov <dvyukov@google.com> Cc: Marco Elver <elver@google.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Konovalov <andreyknvl@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Waiman Long <longman@redhat.com>
2024-03-05 17:04:07 +00:00
entries,
STACK_HASH_TABLE_SCALE,
HASH_EARLY,
lib/stackdepot: replace CONFIG_STACK_HASH_ORDER with automatic sizing JIRA: https://issues.redhat.com/browse/RHEL-28060 commit f9987921cb541b1187a648141a9048547ea89ffb Author: Vlastimil Babka <vbabka@suse.cz> Date: Mon, 20 Jun 2022 17:02:49 +0200 lib/stackdepot: replace CONFIG_STACK_HASH_ORDER with automatic sizing As Linus explained [1], setting the stackdepot hash table size as a config option is suboptimal, especially as stackdepot becomes a dependency of less "expert" subsystems than initially (e.g. DRM, networking, SLUB_DEBUG): : (a) it introduces a new compile-time question that isn't sane to ask : a regular user, but is now exposed to regular users. : (b) this by default uses 1MB of memory for a feature that didn't in : the past, so now if you have small machines you need to make sure you : make a special kernel config for them. Ideally we would employ rhashtable for fully automatic resizing, which should be feasible for many of the new users, but problematic for the original users with restricted context that call __stack_depot_save() with can_alloc == false, i.e. KASAN. However we can easily remove the config option and scale the hash table automatically with system memory. The STACK_HASH_MASK constant becomes stack_hash_mask variable and is used only in one mask operation, so the overhead should be negligible to none. For early allocation we can employ the existing alloc_large_system_hash() function and perform similar scaling for the late allocation. The existing limits of the config option (between 4k and 1M buckets) are preserved, and scaling factor is set to one bucket per 16kB memory so on 64bit the max 1M buckets (8MB memory) is achieved with 16GB system, while a 1GB system will use 512kB. Because KASAN is reported to need the maximum number of buckets even with smaller amounts of memory [2], set it as such when kasan_enabled(). If needed, the automatic scaling could be complemented with a boot-time kernel parameter, but it feels pointless to add it without a specific use case. [1] https://lore.kernel.org/all/CAHk-=wjC5nS+fnf6EzRD9yQRJApAhxx7gRB87ZV+pAWo9oVrTg@mail.gmail.com/ [2] https://lore.kernel.org/all/CACT4Y+Y4GZfXOru2z5tFPzFdaSUd+GFc6KVL=bsa0+1m197cQQ@mail.gmail.com/ Link: https://lkml.kernel.org/r/20220620150249.16814-1-vbabka@suse.cz Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Acked-by: Dmitry Vyukov <dvyukov@google.com> Cc: Marco Elver <elver@google.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Konovalov <andreyknvl@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Waiman Long <longman@redhat.com>
2024-03-05 17:04:07 +00:00
NULL,
&stack_hash_mask,
1UL << STACK_BUCKET_NUMBER_ORDER_MIN,
1UL << STACK_BUCKET_NUMBER_ORDER_MAX);
lib/stackdepot: allow requesting early initialization dynamically Bugzilla: https://bugzilla.redhat.com/2120352 commit a5f1783be29adae15666fd803efd7d2979130869 Author: Vlastimil Babka <vbabka@suse.cz> Date: Wed Mar 2 12:02:22 2022 +0100 lib/stackdepot: allow requesting early initialization dynamically In a later patch we want to add stackdepot support for object owner tracking in slub caches, which is enabled by slub_debug boot parameter. This creates a bootstrap problem as some caches are created early in boot when slab_is_available() is false and thus stack_depot_init() tries to use memblock. But, as reported by Hyeonggon Yoo [1] we are already beyond memblock_free_all(). Ideally memblock allocation should fail, yet it succeeds, but later the system crashes, which is a separately handled issue. To resolve this boostrap issue in a robust way, this patch adds another way to request stack_depot_early_init(), which happens at a well-defined point of time. In addition to build-time CONFIG_STACKDEPOT_ALWAYS_INIT, code that's e.g. processing boot parameters (which happens early enough) can call a new function stack_depot_want_early_init(), which sets a flag that stack_depot_early_init() will check. In this patch we also convert page_owner to this approach. While it doesn't have the bootstrap issue as slub, it's also a functionality enabled by a boot param and can thus request stack_depot_early_init() with memblock allocation instead of later initialization with kvmalloc(). As suggested by Mike, make stack_depot_early_init() only attempt memblock allocation and stack_depot_init() only attempt kvmalloc(). Also change the latter to kvcalloc(). In both cases we can lose the explicit array zeroing, which the allocations do already. As suggested by Marco, provide empty implementations of the init functions for !CONFIG_STACKDEPOT builds to simplify the callers. [1] https://lore.kernel.org/all/YhnUcqyeMgCrWZbd@ip-172-31-19-208.ap-northeast-1.compute.internal/ Reported-by: Hyeonggon Yoo <42.hyeyoo@gmail.com> Suggested-by: Mike Rapoport <rppt@linux.ibm.com> Suggested-by: Marco Elver <elver@google.com> Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Reviewed-by: Marco Elver <elver@google.com> Reviewed-and-tested-by: Hyeonggon Yoo <42.hyeyoo@gmail.com> Reviewed-by: Mike Rapoport <rppt@linux.ibm.com> Acked-by: David Rientjes <rientjes@google.com> Signed-off-by: Chris von Recklinghausen <crecklin@redhat.com>
2022-10-12 11:09:41 +00:00
if (!stack_table) {
pr_err("hash table allocation failed, disabling\n");
stack_depot_disabled = true;
lib/stackdepot: allow requesting early initialization dynamically Bugzilla: https://bugzilla.redhat.com/2120352 commit a5f1783be29adae15666fd803efd7d2979130869 Author: Vlastimil Babka <vbabka@suse.cz> Date: Wed Mar 2 12:02:22 2022 +0100 lib/stackdepot: allow requesting early initialization dynamically In a later patch we want to add stackdepot support for object owner tracking in slub caches, which is enabled by slub_debug boot parameter. This creates a bootstrap problem as some caches are created early in boot when slab_is_available() is false and thus stack_depot_init() tries to use memblock. But, as reported by Hyeonggon Yoo [1] we are already beyond memblock_free_all(). Ideally memblock allocation should fail, yet it succeeds, but later the system crashes, which is a separately handled issue. To resolve this boostrap issue in a robust way, this patch adds another way to request stack_depot_early_init(), which happens at a well-defined point of time. In addition to build-time CONFIG_STACKDEPOT_ALWAYS_INIT, code that's e.g. processing boot parameters (which happens early enough) can call a new function stack_depot_want_early_init(), which sets a flag that stack_depot_early_init() will check. In this patch we also convert page_owner to this approach. While it doesn't have the bootstrap issue as slub, it's also a functionality enabled by a boot param and can thus request stack_depot_early_init() with memblock allocation instead of later initialization with kvmalloc(). As suggested by Mike, make stack_depot_early_init() only attempt memblock allocation and stack_depot_init() only attempt kvmalloc(). Also change the latter to kvcalloc(). In both cases we can lose the explicit array zeroing, which the allocations do already. As suggested by Marco, provide empty implementations of the init functions for !CONFIG_STACKDEPOT builds to simplify the callers. [1] https://lore.kernel.org/all/YhnUcqyeMgCrWZbd@ip-172-31-19-208.ap-northeast-1.compute.internal/ Reported-by: Hyeonggon Yoo <42.hyeyoo@gmail.com> Suggested-by: Mike Rapoport <rppt@linux.ibm.com> Suggested-by: Marco Elver <elver@google.com> Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Reviewed-by: Marco Elver <elver@google.com> Reviewed-and-tested-by: Hyeonggon Yoo <42.hyeyoo@gmail.com> Reviewed-by: Mike Rapoport <rppt@linux.ibm.com> Acked-by: David Rientjes <rientjes@google.com> Signed-off-by: Chris von Recklinghausen <crecklin@redhat.com>
2022-10-12 11:09:41 +00:00
return -ENOMEM;
}
if (!entries) {
/*
* Obtain the number of entries that was calculated by
* alloc_large_system_hash().
*/
entries = stack_hash_mask + 1;
}
init_stack_table(entries);
lib/stackdepot: allow requesting early initialization dynamically Bugzilla: https://bugzilla.redhat.com/2120352 commit a5f1783be29adae15666fd803efd7d2979130869 Author: Vlastimil Babka <vbabka@suse.cz> Date: Wed Mar 2 12:02:22 2022 +0100 lib/stackdepot: allow requesting early initialization dynamically In a later patch we want to add stackdepot support for object owner tracking in slub caches, which is enabled by slub_debug boot parameter. This creates a bootstrap problem as some caches are created early in boot when slab_is_available() is false and thus stack_depot_init() tries to use memblock. But, as reported by Hyeonggon Yoo [1] we are already beyond memblock_free_all(). Ideally memblock allocation should fail, yet it succeeds, but later the system crashes, which is a separately handled issue. To resolve this boostrap issue in a robust way, this patch adds another way to request stack_depot_early_init(), which happens at a well-defined point of time. In addition to build-time CONFIG_STACKDEPOT_ALWAYS_INIT, code that's e.g. processing boot parameters (which happens early enough) can call a new function stack_depot_want_early_init(), which sets a flag that stack_depot_early_init() will check. In this patch we also convert page_owner to this approach. While it doesn't have the bootstrap issue as slub, it's also a functionality enabled by a boot param and can thus request stack_depot_early_init() with memblock allocation instead of later initialization with kvmalloc(). As suggested by Mike, make stack_depot_early_init() only attempt memblock allocation and stack_depot_init() only attempt kvmalloc(). Also change the latter to kvcalloc(). In both cases we can lose the explicit array zeroing, which the allocations do already. As suggested by Marco, provide empty implementations of the init functions for !CONFIG_STACKDEPOT builds to simplify the callers. [1] https://lore.kernel.org/all/YhnUcqyeMgCrWZbd@ip-172-31-19-208.ap-northeast-1.compute.internal/ Reported-by: Hyeonggon Yoo <42.hyeyoo@gmail.com> Suggested-by: Mike Rapoport <rppt@linux.ibm.com> Suggested-by: Marco Elver <elver@google.com> Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Reviewed-by: Marco Elver <elver@google.com> Reviewed-and-tested-by: Hyeonggon Yoo <42.hyeyoo@gmail.com> Reviewed-by: Mike Rapoport <rppt@linux.ibm.com> Acked-by: David Rientjes <rientjes@google.com> Signed-off-by: Chris von Recklinghausen <crecklin@redhat.com>
2022-10-12 11:09:41 +00:00
return 0;
}
/* Allocates a hash table via kvcalloc. Can be used after boot. */
lib/stackdepot: allow requesting early initialization dynamically Bugzilla: https://bugzilla.redhat.com/2120352 commit a5f1783be29adae15666fd803efd7d2979130869 Author: Vlastimil Babka <vbabka@suse.cz> Date: Wed Mar 2 12:02:22 2022 +0100 lib/stackdepot: allow requesting early initialization dynamically In a later patch we want to add stackdepot support for object owner tracking in slub caches, which is enabled by slub_debug boot parameter. This creates a bootstrap problem as some caches are created early in boot when slab_is_available() is false and thus stack_depot_init() tries to use memblock. But, as reported by Hyeonggon Yoo [1] we are already beyond memblock_free_all(). Ideally memblock allocation should fail, yet it succeeds, but later the system crashes, which is a separately handled issue. To resolve this boostrap issue in a robust way, this patch adds another way to request stack_depot_early_init(), which happens at a well-defined point of time. In addition to build-time CONFIG_STACKDEPOT_ALWAYS_INIT, code that's e.g. processing boot parameters (which happens early enough) can call a new function stack_depot_want_early_init(), which sets a flag that stack_depot_early_init() will check. In this patch we also convert page_owner to this approach. While it doesn't have the bootstrap issue as slub, it's also a functionality enabled by a boot param and can thus request stack_depot_early_init() with memblock allocation instead of later initialization with kvmalloc(). As suggested by Mike, make stack_depot_early_init() only attempt memblock allocation and stack_depot_init() only attempt kvmalloc(). Also change the latter to kvcalloc(). In both cases we can lose the explicit array zeroing, which the allocations do already. As suggested by Marco, provide empty implementations of the init functions for !CONFIG_STACKDEPOT builds to simplify the callers. [1] https://lore.kernel.org/all/YhnUcqyeMgCrWZbd@ip-172-31-19-208.ap-northeast-1.compute.internal/ Reported-by: Hyeonggon Yoo <42.hyeyoo@gmail.com> Suggested-by: Mike Rapoport <rppt@linux.ibm.com> Suggested-by: Marco Elver <elver@google.com> Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Reviewed-by: Marco Elver <elver@google.com> Reviewed-and-tested-by: Hyeonggon Yoo <42.hyeyoo@gmail.com> Reviewed-by: Mike Rapoport <rppt@linux.ibm.com> Acked-by: David Rientjes <rientjes@google.com> Signed-off-by: Chris von Recklinghausen <crecklin@redhat.com>
2022-10-12 11:09:41 +00:00
int stack_depot_init(void)
{
lib/stackdepot: allow optional init and stack_table allocation by kvmalloc() Conflicts: Drop changes to drivers/gpu/drm/drm_dp_mst_topology.c - file no longer exists. Affected function was moved to drivers/gpu/drm/dp/drm_dp_mst_topology.c and it already has the change which was added in RHEL commit 105d2d483226 ("Merge DRM changes from upstream v5.16..v5.17") Drop changes to drivers/gpu/drm/i915/intel_runtime_pm.c - It already has the change which was also added in RHEL commit 105d2d483226. include/linux/ref_tracker.h - Merge conflict caused by presence of 8fd5522f44dc ("ref_tracker: add a count of untracked references") Bugzilla: https://bugzilla.redhat.com/2120352 commit 2dba5eb1c73b6ba2988ced07250edeac0f8cbf5a Author: Vlastimil Babka <vbabka@suse.cz> Date: Fri Jan 21 22:14:27 2022 -0800 lib/stackdepot: allow optional init and stack_table allocation by kvmalloc() Currently, enabling CONFIG_STACKDEPOT means its stack_table will be allocated from memblock, even if stack depot ends up not actually used. The default size of stack_table is 4MB on 32-bit, 8MB on 64-bit. This is fine for use-cases such as KASAN which is also a config option and has overhead on its own. But it's an issue for functionality that has to be actually enabled on boot (page_owner) or depends on hardware (GPU drivers) and thus the memory might be wasted. This was raised as an issue [1] when attempting to add stackdepot support for SLUB's debug object tracking functionality. It's common to build kernels with CONFIG_SLUB_DEBUG and enable slub_debug on boot only when needed, or create only specific kmem caches with debugging for testing purposes. It would thus be more efficient if stackdepot's table was allocated only when actually going to be used. This patch thus makes the allocation (and whole stack_depot_init() call) optional: - Add a CONFIG_STACKDEPOT_ALWAYS_INIT flag to keep using the current well-defined point of allocation as part of mem_init(). Make CONFIG_KASAN select this flag. - Other users have to call stack_depot_init() as part of their own init when it's determined that stack depot will actually be used. This may depend on both config and runtime conditions. Convert current users which are page_owner and several in the DRM subsystem. Same will be done for SLUB later. - Because the init might now be called after the boot-time memblock allocation has given all memory to the buddy allocator, change stack_depot_init() to allocate stack_table with kvmalloc() when memblock is no longer available. Also handle allocation failure by disabling stackdepot (could have theoretically happened even with memblock allocation previously), and don't unnecessarily align the memblock allocation to its own size anymore. [1] https://lore.kernel.org/all/CAMuHMdW=eoVzM1Re5FVoEN87nKfiLmM2+Ah7eNu2KXE hCvbZyA@mail.gmail.com/ Link: https://lkml.kernel.org/r/20211013073005.11351-1-vbabka@suse.cz Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Dmitry Vyukov <dvyukov@google.com> Reviewed-by: Marco Elver <elver@google.com> # stackdepot Cc: Marco Elver <elver@google.com> Cc: Vijayanand Jitta <vjitta@codeaurora.org> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Oliver Glitta <glittao@gmail.com> Cc: Imran Khan <imran.f.khan@oracle.com> From: Colin Ian King <colin.king@canonical.com> Subject: lib/stackdepot: fix spelling mistake and grammar in pr_err message There is a spelling mistake of the work allocation so fix this and re-phrase the message to make it easier to read. Link: https://lkml.kernel.org/r/20211015104159.11282-1-colin.king@canonical. com Signed-off-by: Colin Ian King <colin.king@canonical.com> Cc: Vlastimil Babka <vbabka@suse.cz> From: Vlastimil Babka <vbabka@suse.cz> Subject: lib/stackdepot: allow optional init and stack_table allocation by k vmalloc() - fixup On FLATMEM, we call page_ext_init_flatmem_late() just before kmem_cache_init() which means stack_depot_init() (called by page owner init) will not recognize properly it should use kvmalloc() and not memblock_alloc(). memblock_alloc() will also not issue a warning and return a block memory that can be invalid and cause kernel page fault when saving stacks, as reported by the kernel test robot [1]. Fix this by moving page_ext_init_flatmem_late() below kmem_cache_init() so that slab_is_available() is true during stack_depot_init(). SPARSEMEM doesn't have this issue, as it doesn't do page_ext_init_flatmem_late(), but a different page_ext_init() even later in the boot process. Thanks to Mike Rapoport for pointing out the FLATMEM init ordering issue. While at it, also actually resolve a checkpatch warning in stack_depot_init( ) from DRM CI, which was supposed to be in the original patch already. [1] https://lore.kernel.org/all/20211014085450.GC18719@xsang-OptiPlex-9020/ Link: https://lkml.kernel.org/r/6abd9213-19a9-6d58-cedc-2414386d2d81@suse.cz Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Reported-by: kernel test robot <oliver.sang@intel.com> Cc: Mike Rapoport <rppt@kernel.org> Cc: Stephen Rothwell <sfr@canb.auug.org.au> From: Vlastimil Babka <vbabka@suse.cz> Subject: lib/stackdepot: allow optional init and stack_table allocation by k vmalloc() - fixup3 Due to cd06ab2fd48f ("drm/locking: add backtrace for locking contended locks without backoff") landing recently to -next adding a new stack depot user in drivers/gpu/drm/drm_modeset_lock.c we need to add an appropriate call to stack_depot_init() there as well. Link: https://lkml.kernel.org/r/2a692365-cfa1-64f2-34e0-8aa5674dce5e@suse.cz Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Naresh Kamboju <naresh.kamboju@linaro.org> Cc: Marco Elver <elver@google.com> Cc: Vijayanand Jitta <vjitta@codeaurora.org> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Oliver Glitta <glittao@gmail.com> Cc: Imran Khan <imran.f.khan@oracle.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> From: Vlastimil Babka <vbabka@suse.cz> Subject: lib/stackdepot: allow optional init and stack_table allocation by k vmalloc() - fixup4 Due to 4e66934eaadc ("lib: add reference counting tracking infrastructure") landing recently to net-next adding a new stack depot user in lib/ref_tracker.c we need to add an appropriate call to stack_depot_init() there as well. Link: https://lkml.kernel.org/r/45c1b738-1a2f-5b5f-2f6d-86fab206d01c@suse.cz Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Reviewed-by: Eric Dumazet <edumazet@google.com> Cc: Jiri Slab <jirislaby@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Chris von Recklinghausen <crecklin@redhat.com>
2022-10-12 11:08:52 +00:00
static DEFINE_MUTEX(stack_depot_init_mutex);
unsigned long entries;
lib/stackdepot: allow requesting early initialization dynamically Bugzilla: https://bugzilla.redhat.com/2120352 commit a5f1783be29adae15666fd803efd7d2979130869 Author: Vlastimil Babka <vbabka@suse.cz> Date: Wed Mar 2 12:02:22 2022 +0100 lib/stackdepot: allow requesting early initialization dynamically In a later patch we want to add stackdepot support for object owner tracking in slub caches, which is enabled by slub_debug boot parameter. This creates a bootstrap problem as some caches are created early in boot when slab_is_available() is false and thus stack_depot_init() tries to use memblock. But, as reported by Hyeonggon Yoo [1] we are already beyond memblock_free_all(). Ideally memblock allocation should fail, yet it succeeds, but later the system crashes, which is a separately handled issue. To resolve this boostrap issue in a robust way, this patch adds another way to request stack_depot_early_init(), which happens at a well-defined point of time. In addition to build-time CONFIG_STACKDEPOT_ALWAYS_INIT, code that's e.g. processing boot parameters (which happens early enough) can call a new function stack_depot_want_early_init(), which sets a flag that stack_depot_early_init() will check. In this patch we also convert page_owner to this approach. While it doesn't have the bootstrap issue as slub, it's also a functionality enabled by a boot param and can thus request stack_depot_early_init() with memblock allocation instead of later initialization with kvmalloc(). As suggested by Mike, make stack_depot_early_init() only attempt memblock allocation and stack_depot_init() only attempt kvmalloc(). Also change the latter to kvcalloc(). In both cases we can lose the explicit array zeroing, which the allocations do already. As suggested by Marco, provide empty implementations of the init functions for !CONFIG_STACKDEPOT builds to simplify the callers. [1] https://lore.kernel.org/all/YhnUcqyeMgCrWZbd@ip-172-31-19-208.ap-northeast-1.compute.internal/ Reported-by: Hyeonggon Yoo <42.hyeyoo@gmail.com> Suggested-by: Mike Rapoport <rppt@linux.ibm.com> Suggested-by: Marco Elver <elver@google.com> Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Reviewed-by: Marco Elver <elver@google.com> Reviewed-and-tested-by: Hyeonggon Yoo <42.hyeyoo@gmail.com> Reviewed-by: Mike Rapoport <rppt@linux.ibm.com> Acked-by: David Rientjes <rientjes@google.com> Signed-off-by: Chris von Recklinghausen <crecklin@redhat.com>
2022-10-12 11:09:41 +00:00
int ret = 0;
lib/stackdepot: allow optional init and stack_table allocation by kvmalloc() Conflicts: Drop changes to drivers/gpu/drm/drm_dp_mst_topology.c - file no longer exists. Affected function was moved to drivers/gpu/drm/dp/drm_dp_mst_topology.c and it already has the change which was added in RHEL commit 105d2d483226 ("Merge DRM changes from upstream v5.16..v5.17") Drop changes to drivers/gpu/drm/i915/intel_runtime_pm.c - It already has the change which was also added in RHEL commit 105d2d483226. include/linux/ref_tracker.h - Merge conflict caused by presence of 8fd5522f44dc ("ref_tracker: add a count of untracked references") Bugzilla: https://bugzilla.redhat.com/2120352 commit 2dba5eb1c73b6ba2988ced07250edeac0f8cbf5a Author: Vlastimil Babka <vbabka@suse.cz> Date: Fri Jan 21 22:14:27 2022 -0800 lib/stackdepot: allow optional init and stack_table allocation by kvmalloc() Currently, enabling CONFIG_STACKDEPOT means its stack_table will be allocated from memblock, even if stack depot ends up not actually used. The default size of stack_table is 4MB on 32-bit, 8MB on 64-bit. This is fine for use-cases such as KASAN which is also a config option and has overhead on its own. But it's an issue for functionality that has to be actually enabled on boot (page_owner) or depends on hardware (GPU drivers) and thus the memory might be wasted. This was raised as an issue [1] when attempting to add stackdepot support for SLUB's debug object tracking functionality. It's common to build kernels with CONFIG_SLUB_DEBUG and enable slub_debug on boot only when needed, or create only specific kmem caches with debugging for testing purposes. It would thus be more efficient if stackdepot's table was allocated only when actually going to be used. This patch thus makes the allocation (and whole stack_depot_init() call) optional: - Add a CONFIG_STACKDEPOT_ALWAYS_INIT flag to keep using the current well-defined point of allocation as part of mem_init(). Make CONFIG_KASAN select this flag. - Other users have to call stack_depot_init() as part of their own init when it's determined that stack depot will actually be used. This may depend on both config and runtime conditions. Convert current users which are page_owner and several in the DRM subsystem. Same will be done for SLUB later. - Because the init might now be called after the boot-time memblock allocation has given all memory to the buddy allocator, change stack_depot_init() to allocate stack_table with kvmalloc() when memblock is no longer available. Also handle allocation failure by disabling stackdepot (could have theoretically happened even with memblock allocation previously), and don't unnecessarily align the memblock allocation to its own size anymore. [1] https://lore.kernel.org/all/CAMuHMdW=eoVzM1Re5FVoEN87nKfiLmM2+Ah7eNu2KXE hCvbZyA@mail.gmail.com/ Link: https://lkml.kernel.org/r/20211013073005.11351-1-vbabka@suse.cz Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Dmitry Vyukov <dvyukov@google.com> Reviewed-by: Marco Elver <elver@google.com> # stackdepot Cc: Marco Elver <elver@google.com> Cc: Vijayanand Jitta <vjitta@codeaurora.org> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Oliver Glitta <glittao@gmail.com> Cc: Imran Khan <imran.f.khan@oracle.com> From: Colin Ian King <colin.king@canonical.com> Subject: lib/stackdepot: fix spelling mistake and grammar in pr_err message There is a spelling mistake of the work allocation so fix this and re-phrase the message to make it easier to read. Link: https://lkml.kernel.org/r/20211015104159.11282-1-colin.king@canonical. com Signed-off-by: Colin Ian King <colin.king@canonical.com> Cc: Vlastimil Babka <vbabka@suse.cz> From: Vlastimil Babka <vbabka@suse.cz> Subject: lib/stackdepot: allow optional init and stack_table allocation by k vmalloc() - fixup On FLATMEM, we call page_ext_init_flatmem_late() just before kmem_cache_init() which means stack_depot_init() (called by page owner init) will not recognize properly it should use kvmalloc() and not memblock_alloc(). memblock_alloc() will also not issue a warning and return a block memory that can be invalid and cause kernel page fault when saving stacks, as reported by the kernel test robot [1]. Fix this by moving page_ext_init_flatmem_late() below kmem_cache_init() so that slab_is_available() is true during stack_depot_init(). SPARSEMEM doesn't have this issue, as it doesn't do page_ext_init_flatmem_late(), but a different page_ext_init() even later in the boot process. Thanks to Mike Rapoport for pointing out the FLATMEM init ordering issue. While at it, also actually resolve a checkpatch warning in stack_depot_init( ) from DRM CI, which was supposed to be in the original patch already. [1] https://lore.kernel.org/all/20211014085450.GC18719@xsang-OptiPlex-9020/ Link: https://lkml.kernel.org/r/6abd9213-19a9-6d58-cedc-2414386d2d81@suse.cz Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Reported-by: kernel test robot <oliver.sang@intel.com> Cc: Mike Rapoport <rppt@kernel.org> Cc: Stephen Rothwell <sfr@canb.auug.org.au> From: Vlastimil Babka <vbabka@suse.cz> Subject: lib/stackdepot: allow optional init and stack_table allocation by k vmalloc() - fixup3 Due to cd06ab2fd48f ("drm/locking: add backtrace for locking contended locks without backoff") landing recently to -next adding a new stack depot user in drivers/gpu/drm/drm_modeset_lock.c we need to add an appropriate call to stack_depot_init() there as well. Link: https://lkml.kernel.org/r/2a692365-cfa1-64f2-34e0-8aa5674dce5e@suse.cz Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Naresh Kamboju <naresh.kamboju@linaro.org> Cc: Marco Elver <elver@google.com> Cc: Vijayanand Jitta <vjitta@codeaurora.org> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Oliver Glitta <glittao@gmail.com> Cc: Imran Khan <imran.f.khan@oracle.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> From: Vlastimil Babka <vbabka@suse.cz> Subject: lib/stackdepot: allow optional init and stack_table allocation by k vmalloc() - fixup4 Due to 4e66934eaadc ("lib: add reference counting tracking infrastructure") landing recently to net-next adding a new stack depot user in lib/ref_tracker.c we need to add an appropriate call to stack_depot_init() there as well. Link: https://lkml.kernel.org/r/45c1b738-1a2f-5b5f-2f6d-86fab206d01c@suse.cz Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Reviewed-by: Eric Dumazet <edumazet@google.com> Cc: Jiri Slab <jirislaby@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Chris von Recklinghausen <crecklin@redhat.com>
2022-10-12 11:08:52 +00:00
mutex_lock(&stack_depot_init_mutex);
lib/stackdepot: replace CONFIG_STACK_HASH_ORDER with automatic sizing JIRA: https://issues.redhat.com/browse/RHEL-28060 commit f9987921cb541b1187a648141a9048547ea89ffb Author: Vlastimil Babka <vbabka@suse.cz> Date: Mon, 20 Jun 2022 17:02:49 +0200 lib/stackdepot: replace CONFIG_STACK_HASH_ORDER with automatic sizing As Linus explained [1], setting the stackdepot hash table size as a config option is suboptimal, especially as stackdepot becomes a dependency of less "expert" subsystems than initially (e.g. DRM, networking, SLUB_DEBUG): : (a) it introduces a new compile-time question that isn't sane to ask : a regular user, but is now exposed to regular users. : (b) this by default uses 1MB of memory for a feature that didn't in : the past, so now if you have small machines you need to make sure you : make a special kernel config for them. Ideally we would employ rhashtable for fully automatic resizing, which should be feasible for many of the new users, but problematic for the original users with restricted context that call __stack_depot_save() with can_alloc == false, i.e. KASAN. However we can easily remove the config option and scale the hash table automatically with system memory. The STACK_HASH_MASK constant becomes stack_hash_mask variable and is used only in one mask operation, so the overhead should be negligible to none. For early allocation we can employ the existing alloc_large_system_hash() function and perform similar scaling for the late allocation. The existing limits of the config option (between 4k and 1M buckets) are preserved, and scaling factor is set to one bucket per 16kB memory so on 64bit the max 1M buckets (8MB memory) is achieved with 16GB system, while a 1GB system will use 512kB. Because KASAN is reported to need the maximum number of buckets even with smaller amounts of memory [2], set it as such when kasan_enabled(). If needed, the automatic scaling could be complemented with a boot-time kernel parameter, but it feels pointless to add it without a specific use case. [1] https://lore.kernel.org/all/CAHk-=wjC5nS+fnf6EzRD9yQRJApAhxx7gRB87ZV+pAWo9oVrTg@mail.gmail.com/ [2] https://lore.kernel.org/all/CACT4Y+Y4GZfXOru2z5tFPzFdaSUd+GFc6KVL=bsa0+1m197cQQ@mail.gmail.com/ Link: https://lkml.kernel.org/r/20220620150249.16814-1-vbabka@suse.cz Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Acked-by: Dmitry Vyukov <dvyukov@google.com> Cc: Marco Elver <elver@google.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Konovalov <andreyknvl@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Waiman Long <longman@redhat.com>
2024-03-05 17:04:07 +00:00
if (stack_depot_disabled || stack_table)
goto out_unlock;
lib/stackdepot: replace CONFIG_STACK_HASH_ORDER with automatic sizing JIRA: https://issues.redhat.com/browse/RHEL-28060 commit f9987921cb541b1187a648141a9048547ea89ffb Author: Vlastimil Babka <vbabka@suse.cz> Date: Mon, 20 Jun 2022 17:02:49 +0200 lib/stackdepot: replace CONFIG_STACK_HASH_ORDER with automatic sizing As Linus explained [1], setting the stackdepot hash table size as a config option is suboptimal, especially as stackdepot becomes a dependency of less "expert" subsystems than initially (e.g. DRM, networking, SLUB_DEBUG): : (a) it introduces a new compile-time question that isn't sane to ask : a regular user, but is now exposed to regular users. : (b) this by default uses 1MB of memory for a feature that didn't in : the past, so now if you have small machines you need to make sure you : make a special kernel config for them. Ideally we would employ rhashtable for fully automatic resizing, which should be feasible for many of the new users, but problematic for the original users with restricted context that call __stack_depot_save() with can_alloc == false, i.e. KASAN. However we can easily remove the config option and scale the hash table automatically with system memory. The STACK_HASH_MASK constant becomes stack_hash_mask variable and is used only in one mask operation, so the overhead should be negligible to none. For early allocation we can employ the existing alloc_large_system_hash() function and perform similar scaling for the late allocation. The existing limits of the config option (between 4k and 1M buckets) are preserved, and scaling factor is set to one bucket per 16kB memory so on 64bit the max 1M buckets (8MB memory) is achieved with 16GB system, while a 1GB system will use 512kB. Because KASAN is reported to need the maximum number of buckets even with smaller amounts of memory [2], set it as such when kasan_enabled(). If needed, the automatic scaling could be complemented with a boot-time kernel parameter, but it feels pointless to add it without a specific use case. [1] https://lore.kernel.org/all/CAHk-=wjC5nS+fnf6EzRD9yQRJApAhxx7gRB87ZV+pAWo9oVrTg@mail.gmail.com/ [2] https://lore.kernel.org/all/CACT4Y+Y4GZfXOru2z5tFPzFdaSUd+GFc6KVL=bsa0+1m197cQQ@mail.gmail.com/ Link: https://lkml.kernel.org/r/20220620150249.16814-1-vbabka@suse.cz Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Acked-by: Dmitry Vyukov <dvyukov@google.com> Cc: Marco Elver <elver@google.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Konovalov <andreyknvl@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Waiman Long <longman@redhat.com>
2024-03-05 17:04:07 +00:00
/*
* Similarly to stack_depot_early_init, use stack_bucket_number_order
* if assigned, and rely on automatic scaling otherwise.
*/
if (stack_bucket_number_order) {
entries = 1UL << stack_bucket_number_order;
} else {
int scale = STACK_HASH_TABLE_SCALE;
entries = nr_free_buffer_pages();
entries = roundup_pow_of_two(entries);
if (scale > PAGE_SHIFT)
entries >>= (scale - PAGE_SHIFT);
else
entries <<= (PAGE_SHIFT - scale);
}
if (entries < 1UL << STACK_BUCKET_NUMBER_ORDER_MIN)
entries = 1UL << STACK_BUCKET_NUMBER_ORDER_MIN;
if (entries > 1UL << STACK_BUCKET_NUMBER_ORDER_MAX)
entries = 1UL << STACK_BUCKET_NUMBER_ORDER_MAX;
pr_info("allocating hash table of %lu entries via kvcalloc\n", entries);
stack_table = kvcalloc(entries, sizeof(struct list_head), GFP_KERNEL);
if (!stack_table) {
pr_err("hash table allocation failed, disabling\n");
stack_depot_disabled = true;
ret = -ENOMEM;
goto out_unlock;
}
stack_hash_mask = entries - 1;
init_stack_table(entries);
out_unlock:
lib/stackdepot: allow optional init and stack_table allocation by kvmalloc() Conflicts: Drop changes to drivers/gpu/drm/drm_dp_mst_topology.c - file no longer exists. Affected function was moved to drivers/gpu/drm/dp/drm_dp_mst_topology.c and it already has the change which was added in RHEL commit 105d2d483226 ("Merge DRM changes from upstream v5.16..v5.17") Drop changes to drivers/gpu/drm/i915/intel_runtime_pm.c - It already has the change which was also added in RHEL commit 105d2d483226. include/linux/ref_tracker.h - Merge conflict caused by presence of 8fd5522f44dc ("ref_tracker: add a count of untracked references") Bugzilla: https://bugzilla.redhat.com/2120352 commit 2dba5eb1c73b6ba2988ced07250edeac0f8cbf5a Author: Vlastimil Babka <vbabka@suse.cz> Date: Fri Jan 21 22:14:27 2022 -0800 lib/stackdepot: allow optional init and stack_table allocation by kvmalloc() Currently, enabling CONFIG_STACKDEPOT means its stack_table will be allocated from memblock, even if stack depot ends up not actually used. The default size of stack_table is 4MB on 32-bit, 8MB on 64-bit. This is fine for use-cases such as KASAN which is also a config option and has overhead on its own. But it's an issue for functionality that has to be actually enabled on boot (page_owner) or depends on hardware (GPU drivers) and thus the memory might be wasted. This was raised as an issue [1] when attempting to add stackdepot support for SLUB's debug object tracking functionality. It's common to build kernels with CONFIG_SLUB_DEBUG and enable slub_debug on boot only when needed, or create only specific kmem caches with debugging for testing purposes. It would thus be more efficient if stackdepot's table was allocated only when actually going to be used. This patch thus makes the allocation (and whole stack_depot_init() call) optional: - Add a CONFIG_STACKDEPOT_ALWAYS_INIT flag to keep using the current well-defined point of allocation as part of mem_init(). Make CONFIG_KASAN select this flag. - Other users have to call stack_depot_init() as part of their own init when it's determined that stack depot will actually be used. This may depend on both config and runtime conditions. Convert current users which are page_owner and several in the DRM subsystem. Same will be done for SLUB later. - Because the init might now be called after the boot-time memblock allocation has given all memory to the buddy allocator, change stack_depot_init() to allocate stack_table with kvmalloc() when memblock is no longer available. Also handle allocation failure by disabling stackdepot (could have theoretically happened even with memblock allocation previously), and don't unnecessarily align the memblock allocation to its own size anymore. [1] https://lore.kernel.org/all/CAMuHMdW=eoVzM1Re5FVoEN87nKfiLmM2+Ah7eNu2KXE hCvbZyA@mail.gmail.com/ Link: https://lkml.kernel.org/r/20211013073005.11351-1-vbabka@suse.cz Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Dmitry Vyukov <dvyukov@google.com> Reviewed-by: Marco Elver <elver@google.com> # stackdepot Cc: Marco Elver <elver@google.com> Cc: Vijayanand Jitta <vjitta@codeaurora.org> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Oliver Glitta <glittao@gmail.com> Cc: Imran Khan <imran.f.khan@oracle.com> From: Colin Ian King <colin.king@canonical.com> Subject: lib/stackdepot: fix spelling mistake and grammar in pr_err message There is a spelling mistake of the work allocation so fix this and re-phrase the message to make it easier to read. Link: https://lkml.kernel.org/r/20211015104159.11282-1-colin.king@canonical. com Signed-off-by: Colin Ian King <colin.king@canonical.com> Cc: Vlastimil Babka <vbabka@suse.cz> From: Vlastimil Babka <vbabka@suse.cz> Subject: lib/stackdepot: allow optional init and stack_table allocation by k vmalloc() - fixup On FLATMEM, we call page_ext_init_flatmem_late() just before kmem_cache_init() which means stack_depot_init() (called by page owner init) will not recognize properly it should use kvmalloc() and not memblock_alloc(). memblock_alloc() will also not issue a warning and return a block memory that can be invalid and cause kernel page fault when saving stacks, as reported by the kernel test robot [1]. Fix this by moving page_ext_init_flatmem_late() below kmem_cache_init() so that slab_is_available() is true during stack_depot_init(). SPARSEMEM doesn't have this issue, as it doesn't do page_ext_init_flatmem_late(), but a different page_ext_init() even later in the boot process. Thanks to Mike Rapoport for pointing out the FLATMEM init ordering issue. While at it, also actually resolve a checkpatch warning in stack_depot_init( ) from DRM CI, which was supposed to be in the original patch already. [1] https://lore.kernel.org/all/20211014085450.GC18719@xsang-OptiPlex-9020/ Link: https://lkml.kernel.org/r/6abd9213-19a9-6d58-cedc-2414386d2d81@suse.cz Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Reported-by: kernel test robot <oliver.sang@intel.com> Cc: Mike Rapoport <rppt@kernel.org> Cc: Stephen Rothwell <sfr@canb.auug.org.au> From: Vlastimil Babka <vbabka@suse.cz> Subject: lib/stackdepot: allow optional init and stack_table allocation by k vmalloc() - fixup3 Due to cd06ab2fd48f ("drm/locking: add backtrace for locking contended locks without backoff") landing recently to -next adding a new stack depot user in drivers/gpu/drm/drm_modeset_lock.c we need to add an appropriate call to stack_depot_init() there as well. Link: https://lkml.kernel.org/r/2a692365-cfa1-64f2-34e0-8aa5674dce5e@suse.cz Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Naresh Kamboju <naresh.kamboju@linaro.org> Cc: Marco Elver <elver@google.com> Cc: Vijayanand Jitta <vjitta@codeaurora.org> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Oliver Glitta <glittao@gmail.com> Cc: Imran Khan <imran.f.khan@oracle.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> From: Vlastimil Babka <vbabka@suse.cz> Subject: lib/stackdepot: allow optional init and stack_table allocation by k vmalloc() - fixup4 Due to 4e66934eaadc ("lib: add reference counting tracking infrastructure") landing recently to net-next adding a new stack depot user in lib/ref_tracker.c we need to add an appropriate call to stack_depot_init() there as well. Link: https://lkml.kernel.org/r/45c1b738-1a2f-5b5f-2f6d-86fab206d01c@suse.cz Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Reviewed-by: Eric Dumazet <edumazet@google.com> Cc: Jiri Slab <jirislaby@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Chris von Recklinghausen <crecklin@redhat.com>
2022-10-12 11:08:52 +00:00
mutex_unlock(&stack_depot_init_mutex);
lib/stackdepot: allow requesting early initialization dynamically Bugzilla: https://bugzilla.redhat.com/2120352 commit a5f1783be29adae15666fd803efd7d2979130869 Author: Vlastimil Babka <vbabka@suse.cz> Date: Wed Mar 2 12:02:22 2022 +0100 lib/stackdepot: allow requesting early initialization dynamically In a later patch we want to add stackdepot support for object owner tracking in slub caches, which is enabled by slub_debug boot parameter. This creates a bootstrap problem as some caches are created early in boot when slab_is_available() is false and thus stack_depot_init() tries to use memblock. But, as reported by Hyeonggon Yoo [1] we are already beyond memblock_free_all(). Ideally memblock allocation should fail, yet it succeeds, but later the system crashes, which is a separately handled issue. To resolve this boostrap issue in a robust way, this patch adds another way to request stack_depot_early_init(), which happens at a well-defined point of time. In addition to build-time CONFIG_STACKDEPOT_ALWAYS_INIT, code that's e.g. processing boot parameters (which happens early enough) can call a new function stack_depot_want_early_init(), which sets a flag that stack_depot_early_init() will check. In this patch we also convert page_owner to this approach. While it doesn't have the bootstrap issue as slub, it's also a functionality enabled by a boot param and can thus request stack_depot_early_init() with memblock allocation instead of later initialization with kvmalloc(). As suggested by Mike, make stack_depot_early_init() only attempt memblock allocation and stack_depot_init() only attempt kvmalloc(). Also change the latter to kvcalloc(). In both cases we can lose the explicit array zeroing, which the allocations do already. As suggested by Marco, provide empty implementations of the init functions for !CONFIG_STACKDEPOT builds to simplify the callers. [1] https://lore.kernel.org/all/YhnUcqyeMgCrWZbd@ip-172-31-19-208.ap-northeast-1.compute.internal/ Reported-by: Hyeonggon Yoo <42.hyeyoo@gmail.com> Suggested-by: Mike Rapoport <rppt@linux.ibm.com> Suggested-by: Marco Elver <elver@google.com> Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Reviewed-by: Marco Elver <elver@google.com> Reviewed-and-tested-by: Hyeonggon Yoo <42.hyeyoo@gmail.com> Reviewed-by: Mike Rapoport <rppt@linux.ibm.com> Acked-by: David Rientjes <rientjes@google.com> Signed-off-by: Chris von Recklinghausen <crecklin@redhat.com>
2022-10-12 11:09:41 +00:00
return ret;
}
lib/stackdepot: allow optional init and stack_table allocation by kvmalloc() Conflicts: Drop changes to drivers/gpu/drm/drm_dp_mst_topology.c - file no longer exists. Affected function was moved to drivers/gpu/drm/dp/drm_dp_mst_topology.c and it already has the change which was added in RHEL commit 105d2d483226 ("Merge DRM changes from upstream v5.16..v5.17") Drop changes to drivers/gpu/drm/i915/intel_runtime_pm.c - It already has the change which was also added in RHEL commit 105d2d483226. include/linux/ref_tracker.h - Merge conflict caused by presence of 8fd5522f44dc ("ref_tracker: add a count of untracked references") Bugzilla: https://bugzilla.redhat.com/2120352 commit 2dba5eb1c73b6ba2988ced07250edeac0f8cbf5a Author: Vlastimil Babka <vbabka@suse.cz> Date: Fri Jan 21 22:14:27 2022 -0800 lib/stackdepot: allow optional init and stack_table allocation by kvmalloc() Currently, enabling CONFIG_STACKDEPOT means its stack_table will be allocated from memblock, even if stack depot ends up not actually used. The default size of stack_table is 4MB on 32-bit, 8MB on 64-bit. This is fine for use-cases such as KASAN which is also a config option and has overhead on its own. But it's an issue for functionality that has to be actually enabled on boot (page_owner) or depends on hardware (GPU drivers) and thus the memory might be wasted. This was raised as an issue [1] when attempting to add stackdepot support for SLUB's debug object tracking functionality. It's common to build kernels with CONFIG_SLUB_DEBUG and enable slub_debug on boot only when needed, or create only specific kmem caches with debugging for testing purposes. It would thus be more efficient if stackdepot's table was allocated only when actually going to be used. This patch thus makes the allocation (and whole stack_depot_init() call) optional: - Add a CONFIG_STACKDEPOT_ALWAYS_INIT flag to keep using the current well-defined point of allocation as part of mem_init(). Make CONFIG_KASAN select this flag. - Other users have to call stack_depot_init() as part of their own init when it's determined that stack depot will actually be used. This may depend on both config and runtime conditions. Convert current users which are page_owner and several in the DRM subsystem. Same will be done for SLUB later. - Because the init might now be called after the boot-time memblock allocation has given all memory to the buddy allocator, change stack_depot_init() to allocate stack_table with kvmalloc() when memblock is no longer available. Also handle allocation failure by disabling stackdepot (could have theoretically happened even with memblock allocation previously), and don't unnecessarily align the memblock allocation to its own size anymore. [1] https://lore.kernel.org/all/CAMuHMdW=eoVzM1Re5FVoEN87nKfiLmM2+Ah7eNu2KXE hCvbZyA@mail.gmail.com/ Link: https://lkml.kernel.org/r/20211013073005.11351-1-vbabka@suse.cz Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Dmitry Vyukov <dvyukov@google.com> Reviewed-by: Marco Elver <elver@google.com> # stackdepot Cc: Marco Elver <elver@google.com> Cc: Vijayanand Jitta <vjitta@codeaurora.org> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Oliver Glitta <glittao@gmail.com> Cc: Imran Khan <imran.f.khan@oracle.com> From: Colin Ian King <colin.king@canonical.com> Subject: lib/stackdepot: fix spelling mistake and grammar in pr_err message There is a spelling mistake of the work allocation so fix this and re-phrase the message to make it easier to read. Link: https://lkml.kernel.org/r/20211015104159.11282-1-colin.king@canonical. com Signed-off-by: Colin Ian King <colin.king@canonical.com> Cc: Vlastimil Babka <vbabka@suse.cz> From: Vlastimil Babka <vbabka@suse.cz> Subject: lib/stackdepot: allow optional init and stack_table allocation by k vmalloc() - fixup On FLATMEM, we call page_ext_init_flatmem_late() just before kmem_cache_init() which means stack_depot_init() (called by page owner init) will not recognize properly it should use kvmalloc() and not memblock_alloc(). memblock_alloc() will also not issue a warning and return a block memory that can be invalid and cause kernel page fault when saving stacks, as reported by the kernel test robot [1]. Fix this by moving page_ext_init_flatmem_late() below kmem_cache_init() so that slab_is_available() is true during stack_depot_init(). SPARSEMEM doesn't have this issue, as it doesn't do page_ext_init_flatmem_late(), but a different page_ext_init() even later in the boot process. Thanks to Mike Rapoport for pointing out the FLATMEM init ordering issue. While at it, also actually resolve a checkpatch warning in stack_depot_init( ) from DRM CI, which was supposed to be in the original patch already. [1] https://lore.kernel.org/all/20211014085450.GC18719@xsang-OptiPlex-9020/ Link: https://lkml.kernel.org/r/6abd9213-19a9-6d58-cedc-2414386d2d81@suse.cz Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Reported-by: kernel test robot <oliver.sang@intel.com> Cc: Mike Rapoport <rppt@kernel.org> Cc: Stephen Rothwell <sfr@canb.auug.org.au> From: Vlastimil Babka <vbabka@suse.cz> Subject: lib/stackdepot: allow optional init and stack_table allocation by k vmalloc() - fixup3 Due to cd06ab2fd48f ("drm/locking: add backtrace for locking contended locks without backoff") landing recently to -next adding a new stack depot user in drivers/gpu/drm/drm_modeset_lock.c we need to add an appropriate call to stack_depot_init() there as well. Link: https://lkml.kernel.org/r/2a692365-cfa1-64f2-34e0-8aa5674dce5e@suse.cz Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Naresh Kamboju <naresh.kamboju@linaro.org> Cc: Marco Elver <elver@google.com> Cc: Vijayanand Jitta <vjitta@codeaurora.org> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Oliver Glitta <glittao@gmail.com> Cc: Imran Khan <imran.f.khan@oracle.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> From: Vlastimil Babka <vbabka@suse.cz> Subject: lib/stackdepot: allow optional init and stack_table allocation by k vmalloc() - fixup4 Due to 4e66934eaadc ("lib: add reference counting tracking infrastructure") landing recently to net-next adding a new stack depot user in lib/ref_tracker.c we need to add an appropriate call to stack_depot_init() there as well. Link: https://lkml.kernel.org/r/45c1b738-1a2f-5b5f-2f6d-86fab206d01c@suse.cz Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Reviewed-by: Eric Dumazet <edumazet@google.com> Cc: Jiri Slab <jirislaby@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Chris von Recklinghausen <crecklin@redhat.com>
2022-10-12 11:08:52 +00:00
EXPORT_SYMBOL_GPL(stack_depot_init);
mm, kasan: stackdepot implementation. Enable stackdepot for SLAB Implement the stack depot and provide CONFIG_STACKDEPOT. Stack depot will allow KASAN store allocation/deallocation stack traces for memory chunks. The stack traces are stored in a hash table and referenced by handles which reside in the kasan_alloc_meta and kasan_free_meta structures in the allocated memory chunks. IRQ stack traces are cut below the IRQ entry point to avoid unnecessary duplication. Right now stackdepot support is only enabled in SLAB allocator. Once KASAN features in SLAB are on par with those in SLUB we can switch SLUB to stackdepot as well, thus removing the dependency on SLUB stack bookkeeping, which wastes a lot of memory. This patch is based on the "mm: kasan: stack depots" patch originally prepared by Dmitry Chernenkov. Joonsoo has said that he plans to reuse the stackdepot code for the mm/page_owner.c debugging facility. [akpm@linux-foundation.org: s/depot_stack_handle/depot_stack_handle_t] [aryabinin@virtuozzo.com: comment style fixes] Signed-off-by: Alexander Potapenko <glider@google.com> Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Andrey Konovalov <adech.fo@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Konstantin Serebryany <kcc@google.com> Cc: Dmitry Chernenkov <dmitryc@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-25 21:22:08 +00:00
/* Initializes a stack depol pool. */
static void depot_init_pool(void *pool)
{
int offset;
lib/stackdepot: use read/write lock JIRA: https://issues.redhat.com/browse/RHEL-28060 commit a6cd957021f2bbbe0f02e5c32389eb4c06aa97c8 Author: Andrey Konovalov <andreyknvl@gmail.com> Date: Mon, 20 Nov 2023 18:47:10 +0100 lib/stackdepot: use read/write lock Currently, stack depot uses the following locking scheme: 1. Lock-free accesses when looking up a stack record, which allows to have multiple users to look up records in parallel; 2. Spinlock for protecting the stack depot pools and the hash table when adding a new record. For implementing the eviction of stack traces from stack depot, the lock-free approach is not going to work anymore, as we will need to be able to also remove records from the hash table. Convert the spinlock into a read/write lock, and drop the atomic accesses, as they are no longer required. Looking up stack traces is now protected by the read lock and adding new records - by the write lock. One of the following patches will add a new function for evicting stack records, which will be protected by the write lock as well. With this change, multiple users can still look up records in parallel. This is preparatory patch for implementing the eviction of stack records from the stack depot. Link: https://lkml.kernel.org/r/9f81ffcc4bb422ebb6326a65a770bf1918634cbb.1700502145.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Reviewed-by: Alexander Potapenko <glider@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Evgenii Stepanov <eugenis@google.com> Cc: Marco Elver <elver@google.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Waiman Long <longman@redhat.com>
2024-03-06 14:35:07 +00:00
lockdep_assert_held_write(&pool_rwlock);
WARN_ON(!list_empty(&free_stacks));
/* Initialize handles and link stack records into the freelist. */
for (offset = 0; offset <= DEPOT_POOL_SIZE - DEPOT_STACK_RECORD_SIZE;
offset += DEPOT_STACK_RECORD_SIZE) {
struct stack_record *stack = pool + offset;
stack->handle.pool_index = pools_num;
stack->handle.offset = offset >> DEPOT_STACK_ALIGN;
stack->handle.extra = 0;
list_add(&stack->list, &free_stacks);
}
/* Save reference to the pool to be used by depot_fetch_stack(). */
stack_pools[pools_num] = pool;
lib/stackdepot: use read/write lock JIRA: https://issues.redhat.com/browse/RHEL-28060 commit a6cd957021f2bbbe0f02e5c32389eb4c06aa97c8 Author: Andrey Konovalov <andreyknvl@gmail.com> Date: Mon, 20 Nov 2023 18:47:10 +0100 lib/stackdepot: use read/write lock Currently, stack depot uses the following locking scheme: 1. Lock-free accesses when looking up a stack record, which allows to have multiple users to look up records in parallel; 2. Spinlock for protecting the stack depot pools and the hash table when adding a new record. For implementing the eviction of stack traces from stack depot, the lock-free approach is not going to work anymore, as we will need to be able to also remove records from the hash table. Convert the spinlock into a read/write lock, and drop the atomic accesses, as they are no longer required. Looking up stack traces is now protected by the read lock and adding new records - by the write lock. One of the following patches will add a new function for evicting stack records, which will be protected by the write lock as well. With this change, multiple users can still look up records in parallel. This is preparatory patch for implementing the eviction of stack records from the stack depot. Link: https://lkml.kernel.org/r/9f81ffcc4bb422ebb6326a65a770bf1918634cbb.1700502145.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Reviewed-by: Alexander Potapenko <glider@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Evgenii Stepanov <eugenis@google.com> Cc: Marco Elver <elver@google.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Waiman Long <longman@redhat.com>
2024-03-06 14:35:07 +00:00
pools_num++;
}
/* Keeps the preallocated memory to be used for a new stack depot pool. */
static void depot_keep_new_pool(void **prealloc)
{
lib/stackdepot: use read/write lock JIRA: https://issues.redhat.com/browse/RHEL-28060 commit a6cd957021f2bbbe0f02e5c32389eb4c06aa97c8 Author: Andrey Konovalov <andreyknvl@gmail.com> Date: Mon, 20 Nov 2023 18:47:10 +0100 lib/stackdepot: use read/write lock Currently, stack depot uses the following locking scheme: 1. Lock-free accesses when looking up a stack record, which allows to have multiple users to look up records in parallel; 2. Spinlock for protecting the stack depot pools and the hash table when adding a new record. For implementing the eviction of stack traces from stack depot, the lock-free approach is not going to work anymore, as we will need to be able to also remove records from the hash table. Convert the spinlock into a read/write lock, and drop the atomic accesses, as they are no longer required. Looking up stack traces is now protected by the read lock and adding new records - by the write lock. One of the following patches will add a new function for evicting stack records, which will be protected by the write lock as well. With this change, multiple users can still look up records in parallel. This is preparatory patch for implementing the eviction of stack records from the stack depot. Link: https://lkml.kernel.org/r/9f81ffcc4bb422ebb6326a65a770bf1918634cbb.1700502145.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Reviewed-by: Alexander Potapenko <glider@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Evgenii Stepanov <eugenis@google.com> Cc: Marco Elver <elver@google.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Waiman Long <longman@redhat.com>
2024-03-06 14:35:07 +00:00
lockdep_assert_held_write(&pool_rwlock);
/*
* If a new pool is already saved or the maximum number of
* pools is reached, do not use the preallocated memory.
*/
if (!new_pool_required)
return;
/*
* Use the preallocated memory for the new pool
* as long as we do not exceed the maximum number of pools.
*/
if (pools_num < DEPOT_MAX_POOLS) {
new_pool = *prealloc;
*prealloc = NULL;
}
/*
* At this point, either a new pool is kept or the maximum
* number of pools is reached. In either case, take note that
* keeping another pool is not required.
*/
lib/stackdepot: use read/write lock JIRA: https://issues.redhat.com/browse/RHEL-28060 commit a6cd957021f2bbbe0f02e5c32389eb4c06aa97c8 Author: Andrey Konovalov <andreyknvl@gmail.com> Date: Mon, 20 Nov 2023 18:47:10 +0100 lib/stackdepot: use read/write lock Currently, stack depot uses the following locking scheme: 1. Lock-free accesses when looking up a stack record, which allows to have multiple users to look up records in parallel; 2. Spinlock for protecting the stack depot pools and the hash table when adding a new record. For implementing the eviction of stack traces from stack depot, the lock-free approach is not going to work anymore, as we will need to be able to also remove records from the hash table. Convert the spinlock into a read/write lock, and drop the atomic accesses, as they are no longer required. Looking up stack traces is now protected by the read lock and adding new records - by the write lock. One of the following patches will add a new function for evicting stack records, which will be protected by the write lock as well. With this change, multiple users can still look up records in parallel. This is preparatory patch for implementing the eviction of stack records from the stack depot. Link: https://lkml.kernel.org/r/9f81ffcc4bb422ebb6326a65a770bf1918634cbb.1700502145.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Reviewed-by: Alexander Potapenko <glider@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Evgenii Stepanov <eugenis@google.com> Cc: Marco Elver <elver@google.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Waiman Long <longman@redhat.com>
2024-03-06 14:35:07 +00:00
new_pool_required = false;
}
/* Updates references to the current and the next stack depot pools. */
static bool depot_update_pools(void **prealloc)
{
lib/stackdepot: use read/write lock JIRA: https://issues.redhat.com/browse/RHEL-28060 commit a6cd957021f2bbbe0f02e5c32389eb4c06aa97c8 Author: Andrey Konovalov <andreyknvl@gmail.com> Date: Mon, 20 Nov 2023 18:47:10 +0100 lib/stackdepot: use read/write lock Currently, stack depot uses the following locking scheme: 1. Lock-free accesses when looking up a stack record, which allows to have multiple users to look up records in parallel; 2. Spinlock for protecting the stack depot pools and the hash table when adding a new record. For implementing the eviction of stack traces from stack depot, the lock-free approach is not going to work anymore, as we will need to be able to also remove records from the hash table. Convert the spinlock into a read/write lock, and drop the atomic accesses, as they are no longer required. Looking up stack traces is now protected by the read lock and adding new records - by the write lock. One of the following patches will add a new function for evicting stack records, which will be protected by the write lock as well. With this change, multiple users can still look up records in parallel. This is preparatory patch for implementing the eviction of stack records from the stack depot. Link: https://lkml.kernel.org/r/9f81ffcc4bb422ebb6326a65a770bf1918634cbb.1700502145.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Reviewed-by: Alexander Potapenko <glider@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Evgenii Stepanov <eugenis@google.com> Cc: Marco Elver <elver@google.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Waiman Long <longman@redhat.com>
2024-03-06 14:35:07 +00:00
lockdep_assert_held_write(&pool_rwlock);
/* Check if we still have objects in the freelist. */
if (!list_empty(&free_stacks))
goto out_keep_prealloc;
/* Check if we have a new pool saved and use it. */
if (new_pool) {
depot_init_pool(new_pool);
new_pool = NULL;
/* Take note that we might need a new new_pool. */
if (pools_num < DEPOT_MAX_POOLS)
lib/stackdepot: use read/write lock JIRA: https://issues.redhat.com/browse/RHEL-28060 commit a6cd957021f2bbbe0f02e5c32389eb4c06aa97c8 Author: Andrey Konovalov <andreyknvl@gmail.com> Date: Mon, 20 Nov 2023 18:47:10 +0100 lib/stackdepot: use read/write lock Currently, stack depot uses the following locking scheme: 1. Lock-free accesses when looking up a stack record, which allows to have multiple users to look up records in parallel; 2. Spinlock for protecting the stack depot pools and the hash table when adding a new record. For implementing the eviction of stack traces from stack depot, the lock-free approach is not going to work anymore, as we will need to be able to also remove records from the hash table. Convert the spinlock into a read/write lock, and drop the atomic accesses, as they are no longer required. Looking up stack traces is now protected by the read lock and adding new records - by the write lock. One of the following patches will add a new function for evicting stack records, which will be protected by the write lock as well. With this change, multiple users can still look up records in parallel. This is preparatory patch for implementing the eviction of stack records from the stack depot. Link: https://lkml.kernel.org/r/9f81ffcc4bb422ebb6326a65a770bf1918634cbb.1700502145.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Reviewed-by: Alexander Potapenko <glider@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Evgenii Stepanov <eugenis@google.com> Cc: Marco Elver <elver@google.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Waiman Long <longman@redhat.com>
2024-03-06 14:35:07 +00:00
new_pool_required = true;
/* Try keeping the preallocated memory for new_pool. */
goto out_keep_prealloc;
}
/* Bail out if we reached the pool limit. */
if (unlikely(pools_num >= DEPOT_MAX_POOLS)) {
WARN_ONCE(1, "Stack depot reached limit capacity");
return false;
}
/* Check if we have preallocated memory and use it. */
if (*prealloc) {
depot_init_pool(*prealloc);
*prealloc = NULL;
return true;
}
return false;
out_keep_prealloc:
/* Keep the preallocated memory for a new pool if required. */
if (*prealloc)
depot_keep_new_pool(prealloc);
return true;
}
/* Allocates a new stack in a stack depot pool. */
static struct stack_record *
depot_alloc_stack(unsigned long *entries, int size, u32 hash, void **prealloc)
{
struct stack_record *stack;
lib/stackdepot: use read/write lock JIRA: https://issues.redhat.com/browse/RHEL-28060 commit a6cd957021f2bbbe0f02e5c32389eb4c06aa97c8 Author: Andrey Konovalov <andreyknvl@gmail.com> Date: Mon, 20 Nov 2023 18:47:10 +0100 lib/stackdepot: use read/write lock Currently, stack depot uses the following locking scheme: 1. Lock-free accesses when looking up a stack record, which allows to have multiple users to look up records in parallel; 2. Spinlock for protecting the stack depot pools and the hash table when adding a new record. For implementing the eviction of stack traces from stack depot, the lock-free approach is not going to work anymore, as we will need to be able to also remove records from the hash table. Convert the spinlock into a read/write lock, and drop the atomic accesses, as they are no longer required. Looking up stack traces is now protected by the read lock and adding new records - by the write lock. One of the following patches will add a new function for evicting stack records, which will be protected by the write lock as well. With this change, multiple users can still look up records in parallel. This is preparatory patch for implementing the eviction of stack records from the stack depot. Link: https://lkml.kernel.org/r/9f81ffcc4bb422ebb6326a65a770bf1918634cbb.1700502145.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Reviewed-by: Alexander Potapenko <glider@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Evgenii Stepanov <eugenis@google.com> Cc: Marco Elver <elver@google.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Waiman Long <longman@redhat.com>
2024-03-06 14:35:07 +00:00
lockdep_assert_held_write(&pool_rwlock);
/* Update current and new pools if required and possible. */
if (!depot_update_pools(prealloc))
return NULL;
/* Check if we have a stack record to save the stack trace. */
if (list_empty(&free_stacks))
return NULL;
/* Get and unlink the first entry from the freelist. */
stack = list_first_entry(&free_stacks, struct stack_record, list);
list_del(&stack->list);
/* Limit number of saved frames to CONFIG_STACKDEPOT_MAX_FRAMES. */
if (size > CONFIG_STACKDEPOT_MAX_FRAMES)
size = CONFIG_STACKDEPOT_MAX_FRAMES;
/* Save the stack trace. */
stack->hash = hash;
stack->size = size;
/* stack->handle is already filled in by depot_init_pool(). */
memcpy(stack->entries, entries, flex_array_size(stack, entries, size));
/*
* Let KMSAN know the stored stack record is initialized. This shall
* prevent false positive reports if instrumented code accesses it.
*/
kmsan_unpoison_memory(stack, DEPOT_STACK_RECORD_SIZE);
return stack;
}
static struct stack_record *depot_fetch_stack(depot_stack_handle_t handle)
{
union handle_parts parts = { .handle = handle };
void *pool;
size_t offset = parts.offset << DEPOT_STACK_ALIGN;
struct stack_record *stack;
lib/stackdepot: use read/write lock JIRA: https://issues.redhat.com/browse/RHEL-28060 commit a6cd957021f2bbbe0f02e5c32389eb4c06aa97c8 Author: Andrey Konovalov <andreyknvl@gmail.com> Date: Mon, 20 Nov 2023 18:47:10 +0100 lib/stackdepot: use read/write lock Currently, stack depot uses the following locking scheme: 1. Lock-free accesses when looking up a stack record, which allows to have multiple users to look up records in parallel; 2. Spinlock for protecting the stack depot pools and the hash table when adding a new record. For implementing the eviction of stack traces from stack depot, the lock-free approach is not going to work anymore, as we will need to be able to also remove records from the hash table. Convert the spinlock into a read/write lock, and drop the atomic accesses, as they are no longer required. Looking up stack traces is now protected by the read lock and adding new records - by the write lock. One of the following patches will add a new function for evicting stack records, which will be protected by the write lock as well. With this change, multiple users can still look up records in parallel. This is preparatory patch for implementing the eviction of stack records from the stack depot. Link: https://lkml.kernel.org/r/9f81ffcc4bb422ebb6326a65a770bf1918634cbb.1700502145.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Reviewed-by: Alexander Potapenko <glider@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Evgenii Stepanov <eugenis@google.com> Cc: Marco Elver <elver@google.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Waiman Long <longman@redhat.com>
2024-03-06 14:35:07 +00:00
lockdep_assert_held_read(&pool_rwlock);
if (parts.pool_index > pools_num) {
WARN(1, "pool index %d out of bounds (%d) for stack id %08x\n",
lib/stackdepot: use read/write lock JIRA: https://issues.redhat.com/browse/RHEL-28060 commit a6cd957021f2bbbe0f02e5c32389eb4c06aa97c8 Author: Andrey Konovalov <andreyknvl@gmail.com> Date: Mon, 20 Nov 2023 18:47:10 +0100 lib/stackdepot: use read/write lock Currently, stack depot uses the following locking scheme: 1. Lock-free accesses when looking up a stack record, which allows to have multiple users to look up records in parallel; 2. Spinlock for protecting the stack depot pools and the hash table when adding a new record. For implementing the eviction of stack traces from stack depot, the lock-free approach is not going to work anymore, as we will need to be able to also remove records from the hash table. Convert the spinlock into a read/write lock, and drop the atomic accesses, as they are no longer required. Looking up stack traces is now protected by the read lock and adding new records - by the write lock. One of the following patches will add a new function for evicting stack records, which will be protected by the write lock as well. With this change, multiple users can still look up records in parallel. This is preparatory patch for implementing the eviction of stack records from the stack depot. Link: https://lkml.kernel.org/r/9f81ffcc4bb422ebb6326a65a770bf1918634cbb.1700502145.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Reviewed-by: Alexander Potapenko <glider@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Evgenii Stepanov <eugenis@google.com> Cc: Marco Elver <elver@google.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Waiman Long <longman@redhat.com>
2024-03-06 14:35:07 +00:00
parts.pool_index, pools_num, handle);
return NULL;
}
pool = stack_pools[parts.pool_index];
if (!pool)
return NULL;
stack = pool + offset;
return stack;
}
/* Calculates the hash for a stack. */
mm, kasan: stackdepot implementation. Enable stackdepot for SLAB Implement the stack depot and provide CONFIG_STACKDEPOT. Stack depot will allow KASAN store allocation/deallocation stack traces for memory chunks. The stack traces are stored in a hash table and referenced by handles which reside in the kasan_alloc_meta and kasan_free_meta structures in the allocated memory chunks. IRQ stack traces are cut below the IRQ entry point to avoid unnecessary duplication. Right now stackdepot support is only enabled in SLAB allocator. Once KASAN features in SLAB are on par with those in SLUB we can switch SLUB to stackdepot as well, thus removing the dependency on SLUB stack bookkeeping, which wastes a lot of memory. This patch is based on the "mm: kasan: stack depots" patch originally prepared by Dmitry Chernenkov. Joonsoo has said that he plans to reuse the stackdepot code for the mm/page_owner.c debugging facility. [akpm@linux-foundation.org: s/depot_stack_handle/depot_stack_handle_t] [aryabinin@virtuozzo.com: comment style fixes] Signed-off-by: Alexander Potapenko <glider@google.com> Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Andrey Konovalov <adech.fo@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Konstantin Serebryany <kcc@google.com> Cc: Dmitry Chernenkov <dmitryc@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-25 21:22:08 +00:00
static inline u32 hash_stack(unsigned long *entries, unsigned int size)
{
return jhash2((u32 *)entries,
array_size(size, sizeof(*entries)) / sizeof(u32),
STACK_HASH_SEED);
mm, kasan: stackdepot implementation. Enable stackdepot for SLAB Implement the stack depot and provide CONFIG_STACKDEPOT. Stack depot will allow KASAN store allocation/deallocation stack traces for memory chunks. The stack traces are stored in a hash table and referenced by handles which reside in the kasan_alloc_meta and kasan_free_meta structures in the allocated memory chunks. IRQ stack traces are cut below the IRQ entry point to avoid unnecessary duplication. Right now stackdepot support is only enabled in SLAB allocator. Once KASAN features in SLAB are on par with those in SLUB we can switch SLUB to stackdepot as well, thus removing the dependency on SLUB stack bookkeeping, which wastes a lot of memory. This patch is based on the "mm: kasan: stack depots" patch originally prepared by Dmitry Chernenkov. Joonsoo has said that he plans to reuse the stackdepot code for the mm/page_owner.c debugging facility. [akpm@linux-foundation.org: s/depot_stack_handle/depot_stack_handle_t] [aryabinin@virtuozzo.com: comment style fixes] Signed-off-by: Alexander Potapenko <glider@google.com> Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Andrey Konovalov <adech.fo@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Konstantin Serebryany <kcc@google.com> Cc: Dmitry Chernenkov <dmitryc@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-25 21:22:08 +00:00
}
/*
* Non-instrumented version of memcmp().
* Does not check the lexicographical order, only the equality.
*/
static inline
int stackdepot_memcmp(const unsigned long *u1, const unsigned long *u2,
unsigned int n)
{
for ( ; n-- ; u1++, u2++) {
if (*u1 != *u2)
return 1;
}
return 0;
}
/* Finds a stack in a bucket of the hash table. */
static inline struct stack_record *find_stack(struct list_head *bucket,
mm, kasan: stackdepot implementation. Enable stackdepot for SLAB Implement the stack depot and provide CONFIG_STACKDEPOT. Stack depot will allow KASAN store allocation/deallocation stack traces for memory chunks. The stack traces are stored in a hash table and referenced by handles which reside in the kasan_alloc_meta and kasan_free_meta structures in the allocated memory chunks. IRQ stack traces are cut below the IRQ entry point to avoid unnecessary duplication. Right now stackdepot support is only enabled in SLAB allocator. Once KASAN features in SLAB are on par with those in SLUB we can switch SLUB to stackdepot as well, thus removing the dependency on SLUB stack bookkeeping, which wastes a lot of memory. This patch is based on the "mm: kasan: stack depots" patch originally prepared by Dmitry Chernenkov. Joonsoo has said that he plans to reuse the stackdepot code for the mm/page_owner.c debugging facility. [akpm@linux-foundation.org: s/depot_stack_handle/depot_stack_handle_t] [aryabinin@virtuozzo.com: comment style fixes] Signed-off-by: Alexander Potapenko <glider@google.com> Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Andrey Konovalov <adech.fo@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Konstantin Serebryany <kcc@google.com> Cc: Dmitry Chernenkov <dmitryc@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-25 21:22:08 +00:00
unsigned long *entries, int size,
u32 hash)
{
struct list_head *pos;
mm, kasan: stackdepot implementation. Enable stackdepot for SLAB Implement the stack depot and provide CONFIG_STACKDEPOT. Stack depot will allow KASAN store allocation/deallocation stack traces for memory chunks. The stack traces are stored in a hash table and referenced by handles which reside in the kasan_alloc_meta and kasan_free_meta structures in the allocated memory chunks. IRQ stack traces are cut below the IRQ entry point to avoid unnecessary duplication. Right now stackdepot support is only enabled in SLAB allocator. Once KASAN features in SLAB are on par with those in SLUB we can switch SLUB to stackdepot as well, thus removing the dependency on SLUB stack bookkeeping, which wastes a lot of memory. This patch is based on the "mm: kasan: stack depots" patch originally prepared by Dmitry Chernenkov. Joonsoo has said that he plans to reuse the stackdepot code for the mm/page_owner.c debugging facility. [akpm@linux-foundation.org: s/depot_stack_handle/depot_stack_handle_t] [aryabinin@virtuozzo.com: comment style fixes] Signed-off-by: Alexander Potapenko <glider@google.com> Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Andrey Konovalov <adech.fo@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Konstantin Serebryany <kcc@google.com> Cc: Dmitry Chernenkov <dmitryc@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-25 21:22:08 +00:00
struct stack_record *found;
lib/stackdepot: use read/write lock JIRA: https://issues.redhat.com/browse/RHEL-28060 commit a6cd957021f2bbbe0f02e5c32389eb4c06aa97c8 Author: Andrey Konovalov <andreyknvl@gmail.com> Date: Mon, 20 Nov 2023 18:47:10 +0100 lib/stackdepot: use read/write lock Currently, stack depot uses the following locking scheme: 1. Lock-free accesses when looking up a stack record, which allows to have multiple users to look up records in parallel; 2. Spinlock for protecting the stack depot pools and the hash table when adding a new record. For implementing the eviction of stack traces from stack depot, the lock-free approach is not going to work anymore, as we will need to be able to also remove records from the hash table. Convert the spinlock into a read/write lock, and drop the atomic accesses, as they are no longer required. Looking up stack traces is now protected by the read lock and adding new records - by the write lock. One of the following patches will add a new function for evicting stack records, which will be protected by the write lock as well. With this change, multiple users can still look up records in parallel. This is preparatory patch for implementing the eviction of stack records from the stack depot. Link: https://lkml.kernel.org/r/9f81ffcc4bb422ebb6326a65a770bf1918634cbb.1700502145.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Reviewed-by: Alexander Potapenko <glider@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Evgenii Stepanov <eugenis@google.com> Cc: Marco Elver <elver@google.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Waiman Long <longman@redhat.com>
2024-03-06 14:35:07 +00:00
lockdep_assert_held(&pool_rwlock);
list_for_each(pos, bucket) {
found = list_entry(pos, struct stack_record, list);
mm, kasan: stackdepot implementation. Enable stackdepot for SLAB Implement the stack depot and provide CONFIG_STACKDEPOT. Stack depot will allow KASAN store allocation/deallocation stack traces for memory chunks. The stack traces are stored in a hash table and referenced by handles which reside in the kasan_alloc_meta and kasan_free_meta structures in the allocated memory chunks. IRQ stack traces are cut below the IRQ entry point to avoid unnecessary duplication. Right now stackdepot support is only enabled in SLAB allocator. Once KASAN features in SLAB are on par with those in SLUB we can switch SLUB to stackdepot as well, thus removing the dependency on SLUB stack bookkeeping, which wastes a lot of memory. This patch is based on the "mm: kasan: stack depots" patch originally prepared by Dmitry Chernenkov. Joonsoo has said that he plans to reuse the stackdepot code for the mm/page_owner.c debugging facility. [akpm@linux-foundation.org: s/depot_stack_handle/depot_stack_handle_t] [aryabinin@virtuozzo.com: comment style fixes] Signed-off-by: Alexander Potapenko <glider@google.com> Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Andrey Konovalov <adech.fo@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Konstantin Serebryany <kcc@google.com> Cc: Dmitry Chernenkov <dmitryc@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-25 21:22:08 +00:00
if (found->hash == hash &&
found->size == size &&
!stackdepot_memcmp(entries, found->entries, size))
mm, kasan: stackdepot implementation. Enable stackdepot for SLAB Implement the stack depot and provide CONFIG_STACKDEPOT. Stack depot will allow KASAN store allocation/deallocation stack traces for memory chunks. The stack traces are stored in a hash table and referenced by handles which reside in the kasan_alloc_meta and kasan_free_meta structures in the allocated memory chunks. IRQ stack traces are cut below the IRQ entry point to avoid unnecessary duplication. Right now stackdepot support is only enabled in SLAB allocator. Once KASAN features in SLAB are on par with those in SLUB we can switch SLUB to stackdepot as well, thus removing the dependency on SLUB stack bookkeeping, which wastes a lot of memory. This patch is based on the "mm: kasan: stack depots" patch originally prepared by Dmitry Chernenkov. Joonsoo has said that he plans to reuse the stackdepot code for the mm/page_owner.c debugging facility. [akpm@linux-foundation.org: s/depot_stack_handle/depot_stack_handle_t] [aryabinin@virtuozzo.com: comment style fixes] Signed-off-by: Alexander Potapenko <glider@google.com> Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Andrey Konovalov <adech.fo@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Konstantin Serebryany <kcc@google.com> Cc: Dmitry Chernenkov <dmitryc@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-25 21:22:08 +00:00
return found;
}
return NULL;
}
depot_stack_handle_t stack_depot_save_flags(unsigned long *entries,
unsigned int nr_entries,
gfp_t alloc_flags,
depot_flags_t depot_flags)
mm, kasan: stackdepot implementation. Enable stackdepot for SLAB Implement the stack depot and provide CONFIG_STACKDEPOT. Stack depot will allow KASAN store allocation/deallocation stack traces for memory chunks. The stack traces are stored in a hash table and referenced by handles which reside in the kasan_alloc_meta and kasan_free_meta structures in the allocated memory chunks. IRQ stack traces are cut below the IRQ entry point to avoid unnecessary duplication. Right now stackdepot support is only enabled in SLAB allocator. Once KASAN features in SLAB are on par with those in SLUB we can switch SLUB to stackdepot as well, thus removing the dependency on SLUB stack bookkeeping, which wastes a lot of memory. This patch is based on the "mm: kasan: stack depots" patch originally prepared by Dmitry Chernenkov. Joonsoo has said that he plans to reuse the stackdepot code for the mm/page_owner.c debugging facility. [akpm@linux-foundation.org: s/depot_stack_handle/depot_stack_handle_t] [aryabinin@virtuozzo.com: comment style fixes] Signed-off-by: Alexander Potapenko <glider@google.com> Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Andrey Konovalov <adech.fo@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Konstantin Serebryany <kcc@google.com> Cc: Dmitry Chernenkov <dmitryc@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-25 21:22:08 +00:00
{
struct list_head *bucket;
struct stack_record *found = NULL;
depot_stack_handle_t handle = 0;
mm, kasan: stackdepot implementation. Enable stackdepot for SLAB Implement the stack depot and provide CONFIG_STACKDEPOT. Stack depot will allow KASAN store allocation/deallocation stack traces for memory chunks. The stack traces are stored in a hash table and referenced by handles which reside in the kasan_alloc_meta and kasan_free_meta structures in the allocated memory chunks. IRQ stack traces are cut below the IRQ entry point to avoid unnecessary duplication. Right now stackdepot support is only enabled in SLAB allocator. Once KASAN features in SLAB are on par with those in SLUB we can switch SLUB to stackdepot as well, thus removing the dependency on SLUB stack bookkeeping, which wastes a lot of memory. This patch is based on the "mm: kasan: stack depots" patch originally prepared by Dmitry Chernenkov. Joonsoo has said that he plans to reuse the stackdepot code for the mm/page_owner.c debugging facility. [akpm@linux-foundation.org: s/depot_stack_handle/depot_stack_handle_t] [aryabinin@virtuozzo.com: comment style fixes] Signed-off-by: Alexander Potapenko <glider@google.com> Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Andrey Konovalov <adech.fo@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Konstantin Serebryany <kcc@google.com> Cc: Dmitry Chernenkov <dmitryc@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-25 21:22:08 +00:00
struct page *page = NULL;
void *prealloc = NULL;
bool can_alloc = depot_flags & STACK_DEPOT_FLAG_CAN_ALLOC;
lib/stackdepot: use read/write lock JIRA: https://issues.redhat.com/browse/RHEL-28060 commit a6cd957021f2bbbe0f02e5c32389eb4c06aa97c8 Author: Andrey Konovalov <andreyknvl@gmail.com> Date: Mon, 20 Nov 2023 18:47:10 +0100 lib/stackdepot: use read/write lock Currently, stack depot uses the following locking scheme: 1. Lock-free accesses when looking up a stack record, which allows to have multiple users to look up records in parallel; 2. Spinlock for protecting the stack depot pools and the hash table when adding a new record. For implementing the eviction of stack traces from stack depot, the lock-free approach is not going to work anymore, as we will need to be able to also remove records from the hash table. Convert the spinlock into a read/write lock, and drop the atomic accesses, as they are no longer required. Looking up stack traces is now protected by the read lock and adding new records - by the write lock. One of the following patches will add a new function for evicting stack records, which will be protected by the write lock as well. With this change, multiple users can still look up records in parallel. This is preparatory patch for implementing the eviction of stack records from the stack depot. Link: https://lkml.kernel.org/r/9f81ffcc4bb422ebb6326a65a770bf1918634cbb.1700502145.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Reviewed-by: Alexander Potapenko <glider@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Evgenii Stepanov <eugenis@google.com> Cc: Marco Elver <elver@google.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Waiman Long <longman@redhat.com>
2024-03-06 14:35:07 +00:00
bool need_alloc = false;
lib/stackdepot: Provide functions which operate on plain storage arrays The struct stack_trace indirection in the stack depot functions is a truly pointless excercise which requires horrible code at the callsites. Provide interfaces based on plain storage arrays. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com> Acked-by: Alexander Potapenko <glider@google.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: linux-mm@kvack.org Cc: David Rientjes <rientjes@google.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: kasan-dev@googlegroups.com Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Akinobu Mita <akinobu.mita@gmail.com> Cc: Christoph Hellwig <hch@lst.de> Cc: iommu@lists.linux-foundation.org Cc: Robin Murphy <robin.murphy@arm.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Johannes Thumshirn <jthumshirn@suse.de> Cc: David Sterba <dsterba@suse.com> Cc: Chris Mason <clm@fb.com> Cc: Josef Bacik <josef@toxicpanda.com> Cc: linux-btrfs@vger.kernel.org Cc: dm-devel@redhat.com Cc: Mike Snitzer <snitzer@redhat.com> Cc: Alasdair Kergon <agk@redhat.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: intel-gfx@lists.freedesktop.org Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: dri-devel@lists.freedesktop.org Cc: David Airlie <airlied@linux.ie> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Tom Zanussi <tom.zanussi@linux.intel.com> Cc: Miroslav Benes <mbenes@suse.cz> Cc: linux-arch@vger.kernel.org Link: https://lkml.kernel.org/r/20190425094801.414574828@linutronix.de
2019-04-25 09:44:56 +00:00
unsigned long flags;
u32 hash;
mm, kasan: stackdepot implementation. Enable stackdepot for SLAB Implement the stack depot and provide CONFIG_STACKDEPOT. Stack depot will allow KASAN store allocation/deallocation stack traces for memory chunks. The stack traces are stored in a hash table and referenced by handles which reside in the kasan_alloc_meta and kasan_free_meta structures in the allocated memory chunks. IRQ stack traces are cut below the IRQ entry point to avoid unnecessary duplication. Right now stackdepot support is only enabled in SLAB allocator. Once KASAN features in SLAB are on par with those in SLUB we can switch SLUB to stackdepot as well, thus removing the dependency on SLUB stack bookkeeping, which wastes a lot of memory. This patch is based on the "mm: kasan: stack depots" patch originally prepared by Dmitry Chernenkov. Joonsoo has said that he plans to reuse the stackdepot code for the mm/page_owner.c debugging facility. [akpm@linux-foundation.org: s/depot_stack_handle/depot_stack_handle_t] [aryabinin@virtuozzo.com: comment style fixes] Signed-off-by: Alexander Potapenko <glider@google.com> Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Andrey Konovalov <adech.fo@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Konstantin Serebryany <kcc@google.com> Cc: Dmitry Chernenkov <dmitryc@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-25 21:22:08 +00:00
if (WARN_ON(depot_flags & ~STACK_DEPOT_FLAGS_MASK))
return 0;
lib/stackdepot: always do filter_irq_stacks() in stack_depot_save() Bugzilla: https://bugzilla.redhat.com/2120352 commit e940066089490efde86abc519593be84362f4e53 Author: Marco Elver <elver@google.com> Date: Fri Jan 21 22:14:31 2022 -0800 lib/stackdepot: always do filter_irq_stacks() in stack_depot_save() The non-interrupt portion of interrupt stack traces before interrupt entry is usually arbitrary. Therefore, saving stack traces of interrupts (that include entries before interrupt entry) to stack depot leads to unbounded stackdepot growth. As such, use of filter_irq_stacks() is a requirement to ensure stackdepot can efficiently deduplicate interrupt stacks. Looking through all current users of stack_depot_save(), none (except KASAN) pass the stack trace through filter_irq_stacks() before passing it on to stack_depot_save(). Rather than adding filter_irq_stacks() to all current users of stack_depot_save(), it became clear that stack_depot_save() should simply do filter_irq_stacks(). Link: https://lkml.kernel.org/r/20211130095727.2378739-1-elver@google.com Signed-off-by: Marco Elver <elver@google.com> Reviewed-by: Alexander Potapenko <glider@google.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Vijayanand Jitta <vjitta@codeaurora.org> Cc: "Gustavo A. R. Silva" <gustavoars@kernel.org> Cc: Imran Khan <imran.f.khan@oracle.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Chris von Recklinghausen <crecklin@redhat.com>
2022-10-12 11:08:53 +00:00
/*
* If this stack trace is from an interrupt, including anything before
* interrupt entry usually leads to unbounded stack depot growth.
lib/stackdepot: always do filter_irq_stacks() in stack_depot_save() Bugzilla: https://bugzilla.redhat.com/2120352 commit e940066089490efde86abc519593be84362f4e53 Author: Marco Elver <elver@google.com> Date: Fri Jan 21 22:14:31 2022 -0800 lib/stackdepot: always do filter_irq_stacks() in stack_depot_save() The non-interrupt portion of interrupt stack traces before interrupt entry is usually arbitrary. Therefore, saving stack traces of interrupts (that include entries before interrupt entry) to stack depot leads to unbounded stackdepot growth. As such, use of filter_irq_stacks() is a requirement to ensure stackdepot can efficiently deduplicate interrupt stacks. Looking through all current users of stack_depot_save(), none (except KASAN) pass the stack trace through filter_irq_stacks() before passing it on to stack_depot_save(). Rather than adding filter_irq_stacks() to all current users of stack_depot_save(), it became clear that stack_depot_save() should simply do filter_irq_stacks(). Link: https://lkml.kernel.org/r/20211130095727.2378739-1-elver@google.com Signed-off-by: Marco Elver <elver@google.com> Reviewed-by: Alexander Potapenko <glider@google.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Vijayanand Jitta <vjitta@codeaurora.org> Cc: "Gustavo A. R. Silva" <gustavoars@kernel.org> Cc: Imran Khan <imran.f.khan@oracle.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Chris von Recklinghausen <crecklin@redhat.com>
2022-10-12 11:08:53 +00:00
*
* Since use of filter_irq_stacks() is a requirement to ensure stack
* depot can efficiently deduplicate interrupt stacks, always
* filter_irq_stacks() to simplify all callers' use of stack depot.
lib/stackdepot: always do filter_irq_stacks() in stack_depot_save() Bugzilla: https://bugzilla.redhat.com/2120352 commit e940066089490efde86abc519593be84362f4e53 Author: Marco Elver <elver@google.com> Date: Fri Jan 21 22:14:31 2022 -0800 lib/stackdepot: always do filter_irq_stacks() in stack_depot_save() The non-interrupt portion of interrupt stack traces before interrupt entry is usually arbitrary. Therefore, saving stack traces of interrupts (that include entries before interrupt entry) to stack depot leads to unbounded stackdepot growth. As such, use of filter_irq_stacks() is a requirement to ensure stackdepot can efficiently deduplicate interrupt stacks. Looking through all current users of stack_depot_save(), none (except KASAN) pass the stack trace through filter_irq_stacks() before passing it on to stack_depot_save(). Rather than adding filter_irq_stacks() to all current users of stack_depot_save(), it became clear that stack_depot_save() should simply do filter_irq_stacks(). Link: https://lkml.kernel.org/r/20211130095727.2378739-1-elver@google.com Signed-off-by: Marco Elver <elver@google.com> Reviewed-by: Alexander Potapenko <glider@google.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Vijayanand Jitta <vjitta@codeaurora.org> Cc: "Gustavo A. R. Silva" <gustavoars@kernel.org> Cc: Imran Khan <imran.f.khan@oracle.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Chris von Recklinghausen <crecklin@redhat.com>
2022-10-12 11:08:53 +00:00
*/
nr_entries = filter_irq_stacks(entries, nr_entries);
if (unlikely(nr_entries == 0) || stack_depot_disabled)
return 0;
mm, kasan: stackdepot implementation. Enable stackdepot for SLAB Implement the stack depot and provide CONFIG_STACKDEPOT. Stack depot will allow KASAN store allocation/deallocation stack traces for memory chunks. The stack traces are stored in a hash table and referenced by handles which reside in the kasan_alloc_meta and kasan_free_meta structures in the allocated memory chunks. IRQ stack traces are cut below the IRQ entry point to avoid unnecessary duplication. Right now stackdepot support is only enabled in SLAB allocator. Once KASAN features in SLAB are on par with those in SLUB we can switch SLUB to stackdepot as well, thus removing the dependency on SLUB stack bookkeeping, which wastes a lot of memory. This patch is based on the "mm: kasan: stack depots" patch originally prepared by Dmitry Chernenkov. Joonsoo has said that he plans to reuse the stackdepot code for the mm/page_owner.c debugging facility. [akpm@linux-foundation.org: s/depot_stack_handle/depot_stack_handle_t] [aryabinin@virtuozzo.com: comment style fixes] Signed-off-by: Alexander Potapenko <glider@google.com> Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Andrey Konovalov <adech.fo@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Konstantin Serebryany <kcc@google.com> Cc: Dmitry Chernenkov <dmitryc@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-25 21:22:08 +00:00
lib/stackdepot: Provide functions which operate on plain storage arrays The struct stack_trace indirection in the stack depot functions is a truly pointless excercise which requires horrible code at the callsites. Provide interfaces based on plain storage arrays. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com> Acked-by: Alexander Potapenko <glider@google.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: linux-mm@kvack.org Cc: David Rientjes <rientjes@google.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: kasan-dev@googlegroups.com Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Akinobu Mita <akinobu.mita@gmail.com> Cc: Christoph Hellwig <hch@lst.de> Cc: iommu@lists.linux-foundation.org Cc: Robin Murphy <robin.murphy@arm.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Johannes Thumshirn <jthumshirn@suse.de> Cc: David Sterba <dsterba@suse.com> Cc: Chris Mason <clm@fb.com> Cc: Josef Bacik <josef@toxicpanda.com> Cc: linux-btrfs@vger.kernel.org Cc: dm-devel@redhat.com Cc: Mike Snitzer <snitzer@redhat.com> Cc: Alasdair Kergon <agk@redhat.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: intel-gfx@lists.freedesktop.org Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: dri-devel@lists.freedesktop.org Cc: David Airlie <airlied@linux.ie> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Tom Zanussi <tom.zanussi@linux.intel.com> Cc: Miroslav Benes <mbenes@suse.cz> Cc: linux-arch@vger.kernel.org Link: https://lkml.kernel.org/r/20190425094801.414574828@linutronix.de
2019-04-25 09:44:56 +00:00
hash = hash_stack(entries, nr_entries);
lib/stackdepot: replace CONFIG_STACK_HASH_ORDER with automatic sizing JIRA: https://issues.redhat.com/browse/RHEL-28060 commit f9987921cb541b1187a648141a9048547ea89ffb Author: Vlastimil Babka <vbabka@suse.cz> Date: Mon, 20 Jun 2022 17:02:49 +0200 lib/stackdepot: replace CONFIG_STACK_HASH_ORDER with automatic sizing As Linus explained [1], setting the stackdepot hash table size as a config option is suboptimal, especially as stackdepot becomes a dependency of less "expert" subsystems than initially (e.g. DRM, networking, SLUB_DEBUG): : (a) it introduces a new compile-time question that isn't sane to ask : a regular user, but is now exposed to regular users. : (b) this by default uses 1MB of memory for a feature that didn't in : the past, so now if you have small machines you need to make sure you : make a special kernel config for them. Ideally we would employ rhashtable for fully automatic resizing, which should be feasible for many of the new users, but problematic for the original users with restricted context that call __stack_depot_save() with can_alloc == false, i.e. KASAN. However we can easily remove the config option and scale the hash table automatically with system memory. The STACK_HASH_MASK constant becomes stack_hash_mask variable and is used only in one mask operation, so the overhead should be negligible to none. For early allocation we can employ the existing alloc_large_system_hash() function and perform similar scaling for the late allocation. The existing limits of the config option (between 4k and 1M buckets) are preserved, and scaling factor is set to one bucket per 16kB memory so on 64bit the max 1M buckets (8MB memory) is achieved with 16GB system, while a 1GB system will use 512kB. Because KASAN is reported to need the maximum number of buckets even with smaller amounts of memory [2], set it as such when kasan_enabled(). If needed, the automatic scaling could be complemented with a boot-time kernel parameter, but it feels pointless to add it without a specific use case. [1] https://lore.kernel.org/all/CAHk-=wjC5nS+fnf6EzRD9yQRJApAhxx7gRB87ZV+pAWo9oVrTg@mail.gmail.com/ [2] https://lore.kernel.org/all/CACT4Y+Y4GZfXOru2z5tFPzFdaSUd+GFc6KVL=bsa0+1m197cQQ@mail.gmail.com/ Link: https://lkml.kernel.org/r/20220620150249.16814-1-vbabka@suse.cz Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Acked-by: Dmitry Vyukov <dvyukov@google.com> Cc: Marco Elver <elver@google.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Konovalov <andreyknvl@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Waiman Long <longman@redhat.com>
2024-03-05 17:04:07 +00:00
bucket = &stack_table[hash & stack_hash_mask];
mm, kasan: stackdepot implementation. Enable stackdepot for SLAB Implement the stack depot and provide CONFIG_STACKDEPOT. Stack depot will allow KASAN store allocation/deallocation stack traces for memory chunks. The stack traces are stored in a hash table and referenced by handles which reside in the kasan_alloc_meta and kasan_free_meta structures in the allocated memory chunks. IRQ stack traces are cut below the IRQ entry point to avoid unnecessary duplication. Right now stackdepot support is only enabled in SLAB allocator. Once KASAN features in SLAB are on par with those in SLUB we can switch SLUB to stackdepot as well, thus removing the dependency on SLUB stack bookkeeping, which wastes a lot of memory. This patch is based on the "mm: kasan: stack depots" patch originally prepared by Dmitry Chernenkov. Joonsoo has said that he plans to reuse the stackdepot code for the mm/page_owner.c debugging facility. [akpm@linux-foundation.org: s/depot_stack_handle/depot_stack_handle_t] [aryabinin@virtuozzo.com: comment style fixes] Signed-off-by: Alexander Potapenko <glider@google.com> Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Andrey Konovalov <adech.fo@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Konstantin Serebryany <kcc@google.com> Cc: Dmitry Chernenkov <dmitryc@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-25 21:22:08 +00:00
lib/stackdepot: use read/write lock JIRA: https://issues.redhat.com/browse/RHEL-28060 commit a6cd957021f2bbbe0f02e5c32389eb4c06aa97c8 Author: Andrey Konovalov <andreyknvl@gmail.com> Date: Mon, 20 Nov 2023 18:47:10 +0100 lib/stackdepot: use read/write lock Currently, stack depot uses the following locking scheme: 1. Lock-free accesses when looking up a stack record, which allows to have multiple users to look up records in parallel; 2. Spinlock for protecting the stack depot pools and the hash table when adding a new record. For implementing the eviction of stack traces from stack depot, the lock-free approach is not going to work anymore, as we will need to be able to also remove records from the hash table. Convert the spinlock into a read/write lock, and drop the atomic accesses, as they are no longer required. Looking up stack traces is now protected by the read lock and adding new records - by the write lock. One of the following patches will add a new function for evicting stack records, which will be protected by the write lock as well. With this change, multiple users can still look up records in parallel. This is preparatory patch for implementing the eviction of stack records from the stack depot. Link: https://lkml.kernel.org/r/9f81ffcc4bb422ebb6326a65a770bf1918634cbb.1700502145.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Reviewed-by: Alexander Potapenko <glider@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Evgenii Stepanov <eugenis@google.com> Cc: Marco Elver <elver@google.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Waiman Long <longman@redhat.com>
2024-03-06 14:35:07 +00:00
read_lock_irqsave(&pool_rwlock, flags);
/* Fast path: look the stack trace up without full locking. */
found = find_stack(bucket, entries, nr_entries, hash);
lib/stackdepot: use read/write lock JIRA: https://issues.redhat.com/browse/RHEL-28060 commit a6cd957021f2bbbe0f02e5c32389eb4c06aa97c8 Author: Andrey Konovalov <andreyknvl@gmail.com> Date: Mon, 20 Nov 2023 18:47:10 +0100 lib/stackdepot: use read/write lock Currently, stack depot uses the following locking scheme: 1. Lock-free accesses when looking up a stack record, which allows to have multiple users to look up records in parallel; 2. Spinlock for protecting the stack depot pools and the hash table when adding a new record. For implementing the eviction of stack traces from stack depot, the lock-free approach is not going to work anymore, as we will need to be able to also remove records from the hash table. Convert the spinlock into a read/write lock, and drop the atomic accesses, as they are no longer required. Looking up stack traces is now protected by the read lock and adding new records - by the write lock. One of the following patches will add a new function for evicting stack records, which will be protected by the write lock as well. With this change, multiple users can still look up records in parallel. This is preparatory patch for implementing the eviction of stack records from the stack depot. Link: https://lkml.kernel.org/r/9f81ffcc4bb422ebb6326a65a770bf1918634cbb.1700502145.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Reviewed-by: Alexander Potapenko <glider@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Evgenii Stepanov <eugenis@google.com> Cc: Marco Elver <elver@google.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Waiman Long <longman@redhat.com>
2024-03-06 14:35:07 +00:00
if (found) {
read_unlock_irqrestore(&pool_rwlock, flags);
mm, kasan: stackdepot implementation. Enable stackdepot for SLAB Implement the stack depot and provide CONFIG_STACKDEPOT. Stack depot will allow KASAN store allocation/deallocation stack traces for memory chunks. The stack traces are stored in a hash table and referenced by handles which reside in the kasan_alloc_meta and kasan_free_meta structures in the allocated memory chunks. IRQ stack traces are cut below the IRQ entry point to avoid unnecessary duplication. Right now stackdepot support is only enabled in SLAB allocator. Once KASAN features in SLAB are on par with those in SLUB we can switch SLUB to stackdepot as well, thus removing the dependency on SLUB stack bookkeeping, which wastes a lot of memory. This patch is based on the "mm: kasan: stack depots" patch originally prepared by Dmitry Chernenkov. Joonsoo has said that he plans to reuse the stackdepot code for the mm/page_owner.c debugging facility. [akpm@linux-foundation.org: s/depot_stack_handle/depot_stack_handle_t] [aryabinin@virtuozzo.com: comment style fixes] Signed-off-by: Alexander Potapenko <glider@google.com> Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Andrey Konovalov <adech.fo@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Konstantin Serebryany <kcc@google.com> Cc: Dmitry Chernenkov <dmitryc@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-25 21:22:08 +00:00
goto exit;
lib/stackdepot: use read/write lock JIRA: https://issues.redhat.com/browse/RHEL-28060 commit a6cd957021f2bbbe0f02e5c32389eb4c06aa97c8 Author: Andrey Konovalov <andreyknvl@gmail.com> Date: Mon, 20 Nov 2023 18:47:10 +0100 lib/stackdepot: use read/write lock Currently, stack depot uses the following locking scheme: 1. Lock-free accesses when looking up a stack record, which allows to have multiple users to look up records in parallel; 2. Spinlock for protecting the stack depot pools and the hash table when adding a new record. For implementing the eviction of stack traces from stack depot, the lock-free approach is not going to work anymore, as we will need to be able to also remove records from the hash table. Convert the spinlock into a read/write lock, and drop the atomic accesses, as they are no longer required. Looking up stack traces is now protected by the read lock and adding new records - by the write lock. One of the following patches will add a new function for evicting stack records, which will be protected by the write lock as well. With this change, multiple users can still look up records in parallel. This is preparatory patch for implementing the eviction of stack records from the stack depot. Link: https://lkml.kernel.org/r/9f81ffcc4bb422ebb6326a65a770bf1918634cbb.1700502145.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Reviewed-by: Alexander Potapenko <glider@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Evgenii Stepanov <eugenis@google.com> Cc: Marco Elver <elver@google.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Waiman Long <longman@redhat.com>
2024-03-06 14:35:07 +00:00
}
/* Take note if another stack pool needs to be allocated. */
if (new_pool_required)
need_alloc = true;
read_unlock_irqrestore(&pool_rwlock, flags);
mm, kasan: stackdepot implementation. Enable stackdepot for SLAB Implement the stack depot and provide CONFIG_STACKDEPOT. Stack depot will allow KASAN store allocation/deallocation stack traces for memory chunks. The stack traces are stored in a hash table and referenced by handles which reside in the kasan_alloc_meta and kasan_free_meta structures in the allocated memory chunks. IRQ stack traces are cut below the IRQ entry point to avoid unnecessary duplication. Right now stackdepot support is only enabled in SLAB allocator. Once KASAN features in SLAB are on par with those in SLUB we can switch SLUB to stackdepot as well, thus removing the dependency on SLUB stack bookkeeping, which wastes a lot of memory. This patch is based on the "mm: kasan: stack depots" patch originally prepared by Dmitry Chernenkov. Joonsoo has said that he plans to reuse the stackdepot code for the mm/page_owner.c debugging facility. [akpm@linux-foundation.org: s/depot_stack_handle/depot_stack_handle_t] [aryabinin@virtuozzo.com: comment style fixes] Signed-off-by: Alexander Potapenko <glider@google.com> Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Andrey Konovalov <adech.fo@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Konstantin Serebryany <kcc@google.com> Cc: Dmitry Chernenkov <dmitryc@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-25 21:22:08 +00:00
/*
lib/stackdepot: use read/write lock JIRA: https://issues.redhat.com/browse/RHEL-28060 commit a6cd957021f2bbbe0f02e5c32389eb4c06aa97c8 Author: Andrey Konovalov <andreyknvl@gmail.com> Date: Mon, 20 Nov 2023 18:47:10 +0100 lib/stackdepot: use read/write lock Currently, stack depot uses the following locking scheme: 1. Lock-free accesses when looking up a stack record, which allows to have multiple users to look up records in parallel; 2. Spinlock for protecting the stack depot pools and the hash table when adding a new record. For implementing the eviction of stack traces from stack depot, the lock-free approach is not going to work anymore, as we will need to be able to also remove records from the hash table. Convert the spinlock into a read/write lock, and drop the atomic accesses, as they are no longer required. Looking up stack traces is now protected by the read lock and adding new records - by the write lock. One of the following patches will add a new function for evicting stack records, which will be protected by the write lock as well. With this change, multiple users can still look up records in parallel. This is preparatory patch for implementing the eviction of stack records from the stack depot. Link: https://lkml.kernel.org/r/9f81ffcc4bb422ebb6326a65a770bf1918634cbb.1700502145.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Reviewed-by: Alexander Potapenko <glider@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Evgenii Stepanov <eugenis@google.com> Cc: Marco Elver <elver@google.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Waiman Long <longman@redhat.com>
2024-03-06 14:35:07 +00:00
* Allocate memory for a new pool if required now:
* we won't be able to do that under the lock.
mm, kasan: stackdepot implementation. Enable stackdepot for SLAB Implement the stack depot and provide CONFIG_STACKDEPOT. Stack depot will allow KASAN store allocation/deallocation stack traces for memory chunks. The stack traces are stored in a hash table and referenced by handles which reside in the kasan_alloc_meta and kasan_free_meta structures in the allocated memory chunks. IRQ stack traces are cut below the IRQ entry point to avoid unnecessary duplication. Right now stackdepot support is only enabled in SLAB allocator. Once KASAN features in SLAB are on par with those in SLUB we can switch SLUB to stackdepot as well, thus removing the dependency on SLUB stack bookkeeping, which wastes a lot of memory. This patch is based on the "mm: kasan: stack depots" patch originally prepared by Dmitry Chernenkov. Joonsoo has said that he plans to reuse the stackdepot code for the mm/page_owner.c debugging facility. [akpm@linux-foundation.org: s/depot_stack_handle/depot_stack_handle_t] [aryabinin@virtuozzo.com: comment style fixes] Signed-off-by: Alexander Potapenko <glider@google.com> Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Andrey Konovalov <adech.fo@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Konstantin Serebryany <kcc@google.com> Cc: Dmitry Chernenkov <dmitryc@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-25 21:22:08 +00:00
*/
lib/stackdepot: use read/write lock JIRA: https://issues.redhat.com/browse/RHEL-28060 commit a6cd957021f2bbbe0f02e5c32389eb4c06aa97c8 Author: Andrey Konovalov <andreyknvl@gmail.com> Date: Mon, 20 Nov 2023 18:47:10 +0100 lib/stackdepot: use read/write lock Currently, stack depot uses the following locking scheme: 1. Lock-free accesses when looking up a stack record, which allows to have multiple users to look up records in parallel; 2. Spinlock for protecting the stack depot pools and the hash table when adding a new record. For implementing the eviction of stack traces from stack depot, the lock-free approach is not going to work anymore, as we will need to be able to also remove records from the hash table. Convert the spinlock into a read/write lock, and drop the atomic accesses, as they are no longer required. Looking up stack traces is now protected by the read lock and adding new records - by the write lock. One of the following patches will add a new function for evicting stack records, which will be protected by the write lock as well. With this change, multiple users can still look up records in parallel. This is preparatory patch for implementing the eviction of stack records from the stack depot. Link: https://lkml.kernel.org/r/9f81ffcc4bb422ebb6326a65a770bf1918634cbb.1700502145.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Reviewed-by: Alexander Potapenko <glider@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Evgenii Stepanov <eugenis@google.com> Cc: Marco Elver <elver@google.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Waiman Long <longman@redhat.com>
2024-03-06 14:35:07 +00:00
if (unlikely(can_alloc && need_alloc)) {
mm, kasan: stackdepot implementation. Enable stackdepot for SLAB Implement the stack depot and provide CONFIG_STACKDEPOT. Stack depot will allow KASAN store allocation/deallocation stack traces for memory chunks. The stack traces are stored in a hash table and referenced by handles which reside in the kasan_alloc_meta and kasan_free_meta structures in the allocated memory chunks. IRQ stack traces are cut below the IRQ entry point to avoid unnecessary duplication. Right now stackdepot support is only enabled in SLAB allocator. Once KASAN features in SLAB are on par with those in SLUB we can switch SLUB to stackdepot as well, thus removing the dependency on SLUB stack bookkeeping, which wastes a lot of memory. This patch is based on the "mm: kasan: stack depots" patch originally prepared by Dmitry Chernenkov. Joonsoo has said that he plans to reuse the stackdepot code for the mm/page_owner.c debugging facility. [akpm@linux-foundation.org: s/depot_stack_handle/depot_stack_handle_t] [aryabinin@virtuozzo.com: comment style fixes] Signed-off-by: Alexander Potapenko <glider@google.com> Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Andrey Konovalov <adech.fo@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Konstantin Serebryany <kcc@google.com> Cc: Dmitry Chernenkov <dmitryc@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-25 21:22:08 +00:00
/*
* Zero out zone modifiers, as we don't have specific zone
* requirements. Keep the flags related to allocation in atomic
* contexts and I/O.
*/
alloc_flags &= ~GFP_ZONEMASK;
alloc_flags &= (GFP_ATOMIC | GFP_KERNEL);
alloc_flags |= __GFP_NOWARN;
page = alloc_pages(alloc_flags, DEPOT_POOL_ORDER);
mm, kasan: stackdepot implementation. Enable stackdepot for SLAB Implement the stack depot and provide CONFIG_STACKDEPOT. Stack depot will allow KASAN store allocation/deallocation stack traces for memory chunks. The stack traces are stored in a hash table and referenced by handles which reside in the kasan_alloc_meta and kasan_free_meta structures in the allocated memory chunks. IRQ stack traces are cut below the IRQ entry point to avoid unnecessary duplication. Right now stackdepot support is only enabled in SLAB allocator. Once KASAN features in SLAB are on par with those in SLUB we can switch SLUB to stackdepot as well, thus removing the dependency on SLUB stack bookkeeping, which wastes a lot of memory. This patch is based on the "mm: kasan: stack depots" patch originally prepared by Dmitry Chernenkov. Joonsoo has said that he plans to reuse the stackdepot code for the mm/page_owner.c debugging facility. [akpm@linux-foundation.org: s/depot_stack_handle/depot_stack_handle_t] [aryabinin@virtuozzo.com: comment style fixes] Signed-off-by: Alexander Potapenko <glider@google.com> Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Andrey Konovalov <adech.fo@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Konstantin Serebryany <kcc@google.com> Cc: Dmitry Chernenkov <dmitryc@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-25 21:22:08 +00:00
if (page)
prealloc = page_address(page);
}
lib/stackdepot: use read/write lock JIRA: https://issues.redhat.com/browse/RHEL-28060 commit a6cd957021f2bbbe0f02e5c32389eb4c06aa97c8 Author: Andrey Konovalov <andreyknvl@gmail.com> Date: Mon, 20 Nov 2023 18:47:10 +0100 lib/stackdepot: use read/write lock Currently, stack depot uses the following locking scheme: 1. Lock-free accesses when looking up a stack record, which allows to have multiple users to look up records in parallel; 2. Spinlock for protecting the stack depot pools and the hash table when adding a new record. For implementing the eviction of stack traces from stack depot, the lock-free approach is not going to work anymore, as we will need to be able to also remove records from the hash table. Convert the spinlock into a read/write lock, and drop the atomic accesses, as they are no longer required. Looking up stack traces is now protected by the read lock and adding new records - by the write lock. One of the following patches will add a new function for evicting stack records, which will be protected by the write lock as well. With this change, multiple users can still look up records in parallel. This is preparatory patch for implementing the eviction of stack records from the stack depot. Link: https://lkml.kernel.org/r/9f81ffcc4bb422ebb6326a65a770bf1918634cbb.1700502145.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Reviewed-by: Alexander Potapenko <glider@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Evgenii Stepanov <eugenis@google.com> Cc: Marco Elver <elver@google.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Waiman Long <longman@redhat.com>
2024-03-06 14:35:07 +00:00
write_lock_irqsave(&pool_rwlock, flags);
mm, kasan: stackdepot implementation. Enable stackdepot for SLAB Implement the stack depot and provide CONFIG_STACKDEPOT. Stack depot will allow KASAN store allocation/deallocation stack traces for memory chunks. The stack traces are stored in a hash table and referenced by handles which reside in the kasan_alloc_meta and kasan_free_meta structures in the allocated memory chunks. IRQ stack traces are cut below the IRQ entry point to avoid unnecessary duplication. Right now stackdepot support is only enabled in SLAB allocator. Once KASAN features in SLAB are on par with those in SLUB we can switch SLUB to stackdepot as well, thus removing the dependency on SLUB stack bookkeeping, which wastes a lot of memory. This patch is based on the "mm: kasan: stack depots" patch originally prepared by Dmitry Chernenkov. Joonsoo has said that he plans to reuse the stackdepot code for the mm/page_owner.c debugging facility. [akpm@linux-foundation.org: s/depot_stack_handle/depot_stack_handle_t] [aryabinin@virtuozzo.com: comment style fixes] Signed-off-by: Alexander Potapenko <glider@google.com> Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Andrey Konovalov <adech.fo@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Konstantin Serebryany <kcc@google.com> Cc: Dmitry Chernenkov <dmitryc@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-25 21:22:08 +00:00
found = find_stack(bucket, entries, nr_entries, hash);
mm, kasan: stackdepot implementation. Enable stackdepot for SLAB Implement the stack depot and provide CONFIG_STACKDEPOT. Stack depot will allow KASAN store allocation/deallocation stack traces for memory chunks. The stack traces are stored in a hash table and referenced by handles which reside in the kasan_alloc_meta and kasan_free_meta structures in the allocated memory chunks. IRQ stack traces are cut below the IRQ entry point to avoid unnecessary duplication. Right now stackdepot support is only enabled in SLAB allocator. Once KASAN features in SLAB are on par with those in SLUB we can switch SLUB to stackdepot as well, thus removing the dependency on SLUB stack bookkeeping, which wastes a lot of memory. This patch is based on the "mm: kasan: stack depots" patch originally prepared by Dmitry Chernenkov. Joonsoo has said that he plans to reuse the stackdepot code for the mm/page_owner.c debugging facility. [akpm@linux-foundation.org: s/depot_stack_handle/depot_stack_handle_t] [aryabinin@virtuozzo.com: comment style fixes] Signed-off-by: Alexander Potapenko <glider@google.com> Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Andrey Konovalov <adech.fo@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Konstantin Serebryany <kcc@google.com> Cc: Dmitry Chernenkov <dmitryc@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-25 21:22:08 +00:00
if (!found) {
struct stack_record *new =
depot_alloc_stack(entries, nr_entries, hash, &prealloc);
mm, kasan: stackdepot implementation. Enable stackdepot for SLAB Implement the stack depot and provide CONFIG_STACKDEPOT. Stack depot will allow KASAN store allocation/deallocation stack traces for memory chunks. The stack traces are stored in a hash table and referenced by handles which reside in the kasan_alloc_meta and kasan_free_meta structures in the allocated memory chunks. IRQ stack traces are cut below the IRQ entry point to avoid unnecessary duplication. Right now stackdepot support is only enabled in SLAB allocator. Once KASAN features in SLAB are on par with those in SLUB we can switch SLUB to stackdepot as well, thus removing the dependency on SLUB stack bookkeeping, which wastes a lot of memory. This patch is based on the "mm: kasan: stack depots" patch originally prepared by Dmitry Chernenkov. Joonsoo has said that he plans to reuse the stackdepot code for the mm/page_owner.c debugging facility. [akpm@linux-foundation.org: s/depot_stack_handle/depot_stack_handle_t] [aryabinin@virtuozzo.com: comment style fixes] Signed-off-by: Alexander Potapenko <glider@google.com> Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Andrey Konovalov <adech.fo@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Konstantin Serebryany <kcc@google.com> Cc: Dmitry Chernenkov <dmitryc@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-25 21:22:08 +00:00
if (new) {
list_add(&new->list, bucket);
mm, kasan: stackdepot implementation. Enable stackdepot for SLAB Implement the stack depot and provide CONFIG_STACKDEPOT. Stack depot will allow KASAN store allocation/deallocation stack traces for memory chunks. The stack traces are stored in a hash table and referenced by handles which reside in the kasan_alloc_meta and kasan_free_meta structures in the allocated memory chunks. IRQ stack traces are cut below the IRQ entry point to avoid unnecessary duplication. Right now stackdepot support is only enabled in SLAB allocator. Once KASAN features in SLAB are on par with those in SLUB we can switch SLUB to stackdepot as well, thus removing the dependency on SLUB stack bookkeeping, which wastes a lot of memory. This patch is based on the "mm: kasan: stack depots" patch originally prepared by Dmitry Chernenkov. Joonsoo has said that he plans to reuse the stackdepot code for the mm/page_owner.c debugging facility. [akpm@linux-foundation.org: s/depot_stack_handle/depot_stack_handle_t] [aryabinin@virtuozzo.com: comment style fixes] Signed-off-by: Alexander Potapenko <glider@google.com> Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Andrey Konovalov <adech.fo@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Konstantin Serebryany <kcc@google.com> Cc: Dmitry Chernenkov <dmitryc@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-25 21:22:08 +00:00
found = new;
}
} else if (prealloc) {
/*
* Stack depot already contains this stack trace, but let's
* keep the preallocated memory for future.
mm, kasan: stackdepot implementation. Enable stackdepot for SLAB Implement the stack depot and provide CONFIG_STACKDEPOT. Stack depot will allow KASAN store allocation/deallocation stack traces for memory chunks. The stack traces are stored in a hash table and referenced by handles which reside in the kasan_alloc_meta and kasan_free_meta structures in the allocated memory chunks. IRQ stack traces are cut below the IRQ entry point to avoid unnecessary duplication. Right now stackdepot support is only enabled in SLAB allocator. Once KASAN features in SLAB are on par with those in SLUB we can switch SLUB to stackdepot as well, thus removing the dependency on SLUB stack bookkeeping, which wastes a lot of memory. This patch is based on the "mm: kasan: stack depots" patch originally prepared by Dmitry Chernenkov. Joonsoo has said that he plans to reuse the stackdepot code for the mm/page_owner.c debugging facility. [akpm@linux-foundation.org: s/depot_stack_handle/depot_stack_handle_t] [aryabinin@virtuozzo.com: comment style fixes] Signed-off-by: Alexander Potapenko <glider@google.com> Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Andrey Konovalov <adech.fo@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Konstantin Serebryany <kcc@google.com> Cc: Dmitry Chernenkov <dmitryc@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-25 21:22:08 +00:00
*/
depot_keep_new_pool(&prealloc);
mm, kasan: stackdepot implementation. Enable stackdepot for SLAB Implement the stack depot and provide CONFIG_STACKDEPOT. Stack depot will allow KASAN store allocation/deallocation stack traces for memory chunks. The stack traces are stored in a hash table and referenced by handles which reside in the kasan_alloc_meta and kasan_free_meta structures in the allocated memory chunks. IRQ stack traces are cut below the IRQ entry point to avoid unnecessary duplication. Right now stackdepot support is only enabled in SLAB allocator. Once KASAN features in SLAB are on par with those in SLUB we can switch SLUB to stackdepot as well, thus removing the dependency on SLUB stack bookkeeping, which wastes a lot of memory. This patch is based on the "mm: kasan: stack depots" patch originally prepared by Dmitry Chernenkov. Joonsoo has said that he plans to reuse the stackdepot code for the mm/page_owner.c debugging facility. [akpm@linux-foundation.org: s/depot_stack_handle/depot_stack_handle_t] [aryabinin@virtuozzo.com: comment style fixes] Signed-off-by: Alexander Potapenko <glider@google.com> Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Andrey Konovalov <adech.fo@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Konstantin Serebryany <kcc@google.com> Cc: Dmitry Chernenkov <dmitryc@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-25 21:22:08 +00:00
}
lib/stackdepot: use read/write lock JIRA: https://issues.redhat.com/browse/RHEL-28060 commit a6cd957021f2bbbe0f02e5c32389eb4c06aa97c8 Author: Andrey Konovalov <andreyknvl@gmail.com> Date: Mon, 20 Nov 2023 18:47:10 +0100 lib/stackdepot: use read/write lock Currently, stack depot uses the following locking scheme: 1. Lock-free accesses when looking up a stack record, which allows to have multiple users to look up records in parallel; 2. Spinlock for protecting the stack depot pools and the hash table when adding a new record. For implementing the eviction of stack traces from stack depot, the lock-free approach is not going to work anymore, as we will need to be able to also remove records from the hash table. Convert the spinlock into a read/write lock, and drop the atomic accesses, as they are no longer required. Looking up stack traces is now protected by the read lock and adding new records - by the write lock. One of the following patches will add a new function for evicting stack records, which will be protected by the write lock as well. With this change, multiple users can still look up records in parallel. This is preparatory patch for implementing the eviction of stack records from the stack depot. Link: https://lkml.kernel.org/r/9f81ffcc4bb422ebb6326a65a770bf1918634cbb.1700502145.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Reviewed-by: Alexander Potapenko <glider@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Evgenii Stepanov <eugenis@google.com> Cc: Marco Elver <elver@google.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Waiman Long <longman@redhat.com>
2024-03-06 14:35:07 +00:00
write_unlock_irqrestore(&pool_rwlock, flags);
mm, kasan: stackdepot implementation. Enable stackdepot for SLAB Implement the stack depot and provide CONFIG_STACKDEPOT. Stack depot will allow KASAN store allocation/deallocation stack traces for memory chunks. The stack traces are stored in a hash table and referenced by handles which reside in the kasan_alloc_meta and kasan_free_meta structures in the allocated memory chunks. IRQ stack traces are cut below the IRQ entry point to avoid unnecessary duplication. Right now stackdepot support is only enabled in SLAB allocator. Once KASAN features in SLAB are on par with those in SLUB we can switch SLUB to stackdepot as well, thus removing the dependency on SLUB stack bookkeeping, which wastes a lot of memory. This patch is based on the "mm: kasan: stack depots" patch originally prepared by Dmitry Chernenkov. Joonsoo has said that he plans to reuse the stackdepot code for the mm/page_owner.c debugging facility. [akpm@linux-foundation.org: s/depot_stack_handle/depot_stack_handle_t] [aryabinin@virtuozzo.com: comment style fixes] Signed-off-by: Alexander Potapenko <glider@google.com> Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Andrey Konovalov <adech.fo@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Konstantin Serebryany <kcc@google.com> Cc: Dmitry Chernenkov <dmitryc@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-25 21:22:08 +00:00
exit:
if (prealloc) {
/* Stack depot didn't use this memory, free it. */
free_pages((unsigned long)prealloc, DEPOT_POOL_ORDER);
mm, kasan: stackdepot implementation. Enable stackdepot for SLAB Implement the stack depot and provide CONFIG_STACKDEPOT. Stack depot will allow KASAN store allocation/deallocation stack traces for memory chunks. The stack traces are stored in a hash table and referenced by handles which reside in the kasan_alloc_meta and kasan_free_meta structures in the allocated memory chunks. IRQ stack traces are cut below the IRQ entry point to avoid unnecessary duplication. Right now stackdepot support is only enabled in SLAB allocator. Once KASAN features in SLAB are on par with those in SLUB we can switch SLUB to stackdepot as well, thus removing the dependency on SLUB stack bookkeeping, which wastes a lot of memory. This patch is based on the "mm: kasan: stack depots" patch originally prepared by Dmitry Chernenkov. Joonsoo has said that he plans to reuse the stackdepot code for the mm/page_owner.c debugging facility. [akpm@linux-foundation.org: s/depot_stack_handle/depot_stack_handle_t] [aryabinin@virtuozzo.com: comment style fixes] Signed-off-by: Alexander Potapenko <glider@google.com> Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Andrey Konovalov <adech.fo@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Konstantin Serebryany <kcc@google.com> Cc: Dmitry Chernenkov <dmitryc@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-25 21:22:08 +00:00
}
if (found)
handle = found->handle.handle;
return handle;
mm, kasan: stackdepot implementation. Enable stackdepot for SLAB Implement the stack depot and provide CONFIG_STACKDEPOT. Stack depot will allow KASAN store allocation/deallocation stack traces for memory chunks. The stack traces are stored in a hash table and referenced by handles which reside in the kasan_alloc_meta and kasan_free_meta structures in the allocated memory chunks. IRQ stack traces are cut below the IRQ entry point to avoid unnecessary duplication. Right now stackdepot support is only enabled in SLAB allocator. Once KASAN features in SLAB are on par with those in SLUB we can switch SLUB to stackdepot as well, thus removing the dependency on SLUB stack bookkeeping, which wastes a lot of memory. This patch is based on the "mm: kasan: stack depots" patch originally prepared by Dmitry Chernenkov. Joonsoo has said that he plans to reuse the stackdepot code for the mm/page_owner.c debugging facility. [akpm@linux-foundation.org: s/depot_stack_handle/depot_stack_handle_t] [aryabinin@virtuozzo.com: comment style fixes] Signed-off-by: Alexander Potapenko <glider@google.com> Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Andrey Konovalov <adech.fo@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Konstantin Serebryany <kcc@google.com> Cc: Dmitry Chernenkov <dmitryc@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-25 21:22:08 +00:00
}
EXPORT_SYMBOL_GPL(stack_depot_save_flags);
lib/stackdepot: introduce __stack_depot_save() Bugzilla: http://bugzilla.redhat.com/2022894 commit 11ac25c62cd2f3bb8da9e1df2e71afdebe76f093 Author: Marco Elver <elver@google.com> Date: Fri Nov 5 13:35:39 2021 -0700 lib/stackdepot: introduce __stack_depot_save() Add __stack_depot_save(), which provides more fine-grained control over stackdepot's memory allocation behaviour, in case stackdepot runs out of "stack slabs". Normally stackdepot uses alloc_pages() in case it runs out of space; passing can_alloc==false to __stack_depot_save() prohibits this, at the cost of more likely failure to record a stack trace. Link: https://lkml.kernel.org/r/20210913112609.2651084-4-elver@google.com Signed-off-by: Marco Elver <elver@google.com> Tested-by: Shuah Khan <skhan@linuxfoundation.org> Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: "Gustavo A. R. Silva" <gustavoars@kernel.org> Cc: Lai Jiangshan <jiangshanlai@gmail.com> Cc: Taras Madan <tarasmadan@google.com> Cc: Tejun Heo <tj@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vijayanand Jitta <vjitta@codeaurora.org> Cc: Vinayak Menon <vinmenon@codeaurora.org> Cc: Walter Wu <walter-zh.wu@mediatek.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Phil Auld <pauld@redhat.com>
2021-11-15 13:40:41 +00:00
depot_stack_handle_t stack_depot_save(unsigned long *entries,
unsigned int nr_entries,
gfp_t alloc_flags)
{
return stack_depot_save_flags(entries, nr_entries, alloc_flags,
STACK_DEPOT_FLAG_CAN_ALLOC);
lib/stackdepot: introduce __stack_depot_save() Bugzilla: http://bugzilla.redhat.com/2022894 commit 11ac25c62cd2f3bb8da9e1df2e71afdebe76f093 Author: Marco Elver <elver@google.com> Date: Fri Nov 5 13:35:39 2021 -0700 lib/stackdepot: introduce __stack_depot_save() Add __stack_depot_save(), which provides more fine-grained control over stackdepot's memory allocation behaviour, in case stackdepot runs out of "stack slabs". Normally stackdepot uses alloc_pages() in case it runs out of space; passing can_alloc==false to __stack_depot_save() prohibits this, at the cost of more likely failure to record a stack trace. Link: https://lkml.kernel.org/r/20210913112609.2651084-4-elver@google.com Signed-off-by: Marco Elver <elver@google.com> Tested-by: Shuah Khan <skhan@linuxfoundation.org> Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: "Gustavo A. R. Silva" <gustavoars@kernel.org> Cc: Lai Jiangshan <jiangshanlai@gmail.com> Cc: Taras Madan <tarasmadan@google.com> Cc: Tejun Heo <tj@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vijayanand Jitta <vjitta@codeaurora.org> Cc: Vinayak Menon <vinmenon@codeaurora.org> Cc: Walter Wu <walter-zh.wu@mediatek.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Phil Auld <pauld@redhat.com>
2021-11-15 13:40:41 +00:00
}
lib/stackdepot: Provide functions which operate on plain storage arrays The struct stack_trace indirection in the stack depot functions is a truly pointless excercise which requires horrible code at the callsites. Provide interfaces based on plain storage arrays. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com> Acked-by: Alexander Potapenko <glider@google.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: linux-mm@kvack.org Cc: David Rientjes <rientjes@google.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: kasan-dev@googlegroups.com Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Akinobu Mita <akinobu.mita@gmail.com> Cc: Christoph Hellwig <hch@lst.de> Cc: iommu@lists.linux-foundation.org Cc: Robin Murphy <robin.murphy@arm.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Johannes Thumshirn <jthumshirn@suse.de> Cc: David Sterba <dsterba@suse.com> Cc: Chris Mason <clm@fb.com> Cc: Josef Bacik <josef@toxicpanda.com> Cc: linux-btrfs@vger.kernel.org Cc: dm-devel@redhat.com Cc: Mike Snitzer <snitzer@redhat.com> Cc: Alasdair Kergon <agk@redhat.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: intel-gfx@lists.freedesktop.org Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: dri-devel@lists.freedesktop.org Cc: David Airlie <airlied@linux.ie> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Tom Zanussi <tom.zanussi@linux.intel.com> Cc: Miroslav Benes <mbenes@suse.cz> Cc: linux-arch@vger.kernel.org Link: https://lkml.kernel.org/r/20190425094801.414574828@linutronix.de
2019-04-25 09:44:56 +00:00
EXPORT_SYMBOL_GPL(stack_depot_save);
unsigned int stack_depot_fetch(depot_stack_handle_t handle,
unsigned long **entries)
{
struct stack_record *stack;
lib/stackdepot: use read/write lock JIRA: https://issues.redhat.com/browse/RHEL-28060 commit a6cd957021f2bbbe0f02e5c32389eb4c06aa97c8 Author: Andrey Konovalov <andreyknvl@gmail.com> Date: Mon, 20 Nov 2023 18:47:10 +0100 lib/stackdepot: use read/write lock Currently, stack depot uses the following locking scheme: 1. Lock-free accesses when looking up a stack record, which allows to have multiple users to look up records in parallel; 2. Spinlock for protecting the stack depot pools and the hash table when adding a new record. For implementing the eviction of stack traces from stack depot, the lock-free approach is not going to work anymore, as we will need to be able to also remove records from the hash table. Convert the spinlock into a read/write lock, and drop the atomic accesses, as they are no longer required. Looking up stack traces is now protected by the read lock and adding new records - by the write lock. One of the following patches will add a new function for evicting stack records, which will be protected by the write lock as well. With this change, multiple users can still look up records in parallel. This is preparatory patch for implementing the eviction of stack records from the stack depot. Link: https://lkml.kernel.org/r/9f81ffcc4bb422ebb6326a65a770bf1918634cbb.1700502145.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Reviewed-by: Alexander Potapenko <glider@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Evgenii Stepanov <eugenis@google.com> Cc: Marco Elver <elver@google.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Waiman Long <longman@redhat.com>
2024-03-06 14:35:07 +00:00
unsigned long flags;
*entries = NULL;
/*
* Let KMSAN know *entries is initialized. This shall prevent false
* positive reports if instrumented code accesses it.
*/
kmsan_unpoison_memory(entries, sizeof(*entries));
if (!handle || stack_depot_disabled)
return 0;
lib/stackdepot: use read/write lock JIRA: https://issues.redhat.com/browse/RHEL-28060 commit a6cd957021f2bbbe0f02e5c32389eb4c06aa97c8 Author: Andrey Konovalov <andreyknvl@gmail.com> Date: Mon, 20 Nov 2023 18:47:10 +0100 lib/stackdepot: use read/write lock Currently, stack depot uses the following locking scheme: 1. Lock-free accesses when looking up a stack record, which allows to have multiple users to look up records in parallel; 2. Spinlock for protecting the stack depot pools and the hash table when adding a new record. For implementing the eviction of stack traces from stack depot, the lock-free approach is not going to work anymore, as we will need to be able to also remove records from the hash table. Convert the spinlock into a read/write lock, and drop the atomic accesses, as they are no longer required. Looking up stack traces is now protected by the read lock and adding new records - by the write lock. One of the following patches will add a new function for evicting stack records, which will be protected by the write lock as well. With this change, multiple users can still look up records in parallel. This is preparatory patch for implementing the eviction of stack records from the stack depot. Link: https://lkml.kernel.org/r/9f81ffcc4bb422ebb6326a65a770bf1918634cbb.1700502145.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Reviewed-by: Alexander Potapenko <glider@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Evgenii Stepanov <eugenis@google.com> Cc: Marco Elver <elver@google.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Waiman Long <longman@redhat.com>
2024-03-06 14:35:07 +00:00
read_lock_irqsave(&pool_rwlock, flags);
stack = depot_fetch_stack(handle);
lib/stackdepot: use read/write lock JIRA: https://issues.redhat.com/browse/RHEL-28060 commit a6cd957021f2bbbe0f02e5c32389eb4c06aa97c8 Author: Andrey Konovalov <andreyknvl@gmail.com> Date: Mon, 20 Nov 2023 18:47:10 +0100 lib/stackdepot: use read/write lock Currently, stack depot uses the following locking scheme: 1. Lock-free accesses when looking up a stack record, which allows to have multiple users to look up records in parallel; 2. Spinlock for protecting the stack depot pools and the hash table when adding a new record. For implementing the eviction of stack traces from stack depot, the lock-free approach is not going to work anymore, as we will need to be able to also remove records from the hash table. Convert the spinlock into a read/write lock, and drop the atomic accesses, as they are no longer required. Looking up stack traces is now protected by the read lock and adding new records - by the write lock. One of the following patches will add a new function for evicting stack records, which will be protected by the write lock as well. With this change, multiple users can still look up records in parallel. This is preparatory patch for implementing the eviction of stack records from the stack depot. Link: https://lkml.kernel.org/r/9f81ffcc4bb422ebb6326a65a770bf1918634cbb.1700502145.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Reviewed-by: Alexander Potapenko <glider@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Evgenii Stepanov <eugenis@google.com> Cc: Marco Elver <elver@google.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Waiman Long <longman@redhat.com>
2024-03-06 14:35:07 +00:00
read_unlock_irqrestore(&pool_rwlock, flags);
*entries = stack->entries;
return stack->size;
}
EXPORT_SYMBOL_GPL(stack_depot_fetch);
void stack_depot_print(depot_stack_handle_t stack)
{
unsigned long *entries;
unsigned int nr_entries;
nr_entries = stack_depot_fetch(stack, &entries);
if (nr_entries > 0)
stack_trace_print(entries, nr_entries, 0);
}
EXPORT_SYMBOL_GPL(stack_depot_print);
int stack_depot_snprint(depot_stack_handle_t handle, char *buf, size_t size,
int spaces)
{
unsigned long *entries;
unsigned int nr_entries;
nr_entries = stack_depot_fetch(handle, &entries);
return nr_entries ? stack_trace_snprint(buf, size, entries, nr_entries,
spaces) : 0;
}
EXPORT_SYMBOL_GPL(stack_depot_snprint);
depot_stack_handle_t __must_check stack_depot_set_extra_bits(
depot_stack_handle_t handle, unsigned int extra_bits)
{
union handle_parts parts = { .handle = handle };
/* Don't set extra bits on empty handles. */
if (!handle)
return 0;
parts.extra = extra_bits;
return parts.handle;
}
EXPORT_SYMBOL(stack_depot_set_extra_bits);
unsigned int stack_depot_get_extra_bits(depot_stack_handle_t handle)
{
union handle_parts parts = { .handle = handle };
return parts.extra;
}
EXPORT_SYMBOL(stack_depot_get_extra_bits);