Centos-kernel-stream-9/arch/mips/boot/dts/qca/ar9132_tl_wr1043nd_v1.dts

/dts-v1/;

#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>

#include "ar9132.dtsi"

/ {
	compatible = "tplink,tl-wr1043nd-v1", "qca,ar9132";
	model = "TP-Link TL-WR1043ND Version 1";

	alias {
		serial0 = "/ahb/apb/uart@18020000";
	};

	memory@0 {
		device_type = "memory";
		reg = <0x0 0x2000000>;
	};

	extosc: ref {
		compatible = "fixed-clock";
		#clock-cells = <0>;
		clock-frequency = <40000000>;
	};

	ahb {
		apb {
			uart@18020000 {
				status = "okay";
			};

			pll-controller@18050000 {
				clocks = <&extosc>;
			};
		};

		usb@1b000100 {
			status = "okay";
		};

		spi@1f000000 {
			status = "okay";
			num-cs = <1>;

			flash@0 {
				#address-cells = <1>;
				#size-cells = <1>;
				compatible = "s25sl064a";
				reg = <0>;
				spi-max-frequency = <25000000>;

				partition@0 {
					label = "u-boot";
					reg = <0x000000 0x020000>;
				};

				partition@1 {
					label = "firmware";
					reg = <0x020000 0x7D0000>;
				};

				partition@2 {
					label = "art";
					reg = <0x7F0000 0x010000>;
					read-only;
				};
			};
		};
	};

	usb-phy {
		status = "okay";
	};

	gpio-keys {
		compatible = "gpio-keys-polled";
		#address-cells = <1>;
		#size-cells = <0>;

		poll-interval = <20>;
		button@0 {
			label = "reset";
			linux,code = <KEY_RESTART>;
			gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
			debounce-interval = <60>;
		};

		button@1 {
			label = "qss";
			linux,code = <KEY_WPS_BUTTON>;
			gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
			debounce-interval = <60>;
		};
	};

	leds {
		compatible = "gpio-leds";
		led@0 {
			label = "tp-link:green:usb";
			gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
		};

		led@1 {
			label = "tp-link:green:system";
			gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
			linux,default-trigger = "heartbeat";
		};

		led@2 {
			label = "tp-link:green:qss";
			gpios = <&gpio 5 GPIO_ACTIVE_HIGH>;
		};

		led@3 {
			label = "tp-link:green:wlan";
			gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
		};
	};
};