Centos-kernel-stream-9/drivers/usb/cdns3/host.c

158 lines
3.6 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0
/*
* Cadence USBSS and USBSSP DRD Driver - host side
*
* Copyright (C) 2018-2019 Cadence Design Systems.
* Copyright (C) 2017-2018 NXP
*
* Authors: Peter Chen <peter.chen@nxp.com>
* Pawel Laszczak <pawell@cadence.com>
*/
#include <linux/platform_device.h>
treewide: Add missing includes masked by cgroup -> bpf dependency Bugzilla: http://bugzilla.redhat.com/2061784 Brew: https://brewweb.engineering.redhat.com/brew/taskinfo?taskID=45014530 Tested: HP ZBook 15 G5/80D5 Laptop TGL-U(QS) Laptop Conflicts: pulling in changes to usb and/or thunderbolt only. Other changes are pulled in via other BZs commit 8581fd402a0cf80b5298e3b225e7a7bd8f110e69 Author: Jakub Kicinski <kuba@kernel.org> Date: Thu Dec 2 12:34:00 2021 -0800 treewide: Add missing includes masked by cgroup -> bpf dependency cgroup.h (therefore swap.h, therefore half of the universe) includes bpf.h which in turn includes module.h and slab.h. Since we're about to get rid of that dependency we need to clean things up. v2: drop the cpu.h include from cacheinfo.h, it's not necessary and it makes riscv sensitive to ordering of include files. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Acked-by: Krzysztof Wilczyński <kw@linux.com> Acked-by: Peter Chen <peter.chen@kernel.org> Acked-by: SeongJae Park <sj@kernel.org> Acked-by: Jani Nikula <jani.nikula@intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://lore.kernel.org/all/20211120035253.72074-1-kuba@kernel.org/ # v1 Link: https://lore.kernel.org/all/20211120165528.197359-1-kuba@kernel.org/ # cacheinfo discussion Link: https://lore.kernel.org/bpf/20211202203400.1208663-1-kuba@kernel.org Signed-off-by: Torez Smith <torez@redhat.com>
2022-05-02 16:32:38 +00:00
#include <linux/slab.h>
#include "core.h"
#include "drd.h"
#include "host-export.h"
#include <linux/usb/hcd.h>
#include "../host/xhci.h"
#include "../host/xhci-plat.h"
/*
* The XECP_PORT_CAP_REG and XECP_AUX_CTRL_REG1 exist only
* in Cadence USB3 dual-role controller, so it can't be used
* with Cadence CDNSP dual-role controller.
*/
#define XECP_PORT_CAP_REG 0x8000
#define XECP_AUX_CTRL_REG1 0x8120
#define CFG_RXDET_P3_EN BIT(15)
#define LPM_2_STB_SWITCH_EN BIT(25)
usb: cdns3: host: fix endless superspeed hub port reset JIRA: https://issues.redhat.com/browse/RHEL-54566 commit 9d5333c931347005352d5b8beaa43528c94cfc9c Author: Li Jun <jun.li@nxp.com> Date: Wed Oct 26 15:07:49 2022 -0400 usb: cdns3: host: fix endless superspeed hub port reset When usb 3.0 hub connect with one USB 2.0 device and NO USB 3.0 device, some usb hub reports endless port reset message. [ 190.324169] usb 2-1: new SuperSpeed USB device number 88 using xhci-hcd [ 190.352834] hub 2-1:1.0: USB hub found [ 190.356995] hub 2-1:1.0: 4 ports detected [ 190.700056] usb 2-1: USB disconnect, device number 88 [ 192.472139] usb 2-1: new SuperSpeed USB device number 89 using xhci-hcd [ 192.500820] hub 2-1:1.0: USB hub found [ 192.504977] hub 2-1:1.0: 4 ports detected [ 192.852066] usb 2-1: USB disconnect, device number 89 The reason is the runtime pm state of USB2.0 port is active and USB 3.0 port is suspend, so parent device is active state. cat /sys/bus/platform/devices/5b110000.usb/5b130000.usb/xhci-hcd.1.auto/usb2/power/runtime_status suspended cat /sys/bus/platform/devices/5b110000.usb/5b130000.usb/xhci-hcd.1.auto/usb1/power/runtime_status active cat /sys/bus/platform/devices/5b110000.usb/5b130000.usb/xhci-hcd.1.auto/power/runtime_status active cat /sys/bus/platform/devices/5b110000.usb/5b130000.usb/power/runtime_status active So xhci_cdns3_suspend_quirk() have not called. U3 configure is not applied. move U3 configure into host start. Reinit again in resume function in case controller power lost during suspend. Cc: stable@vger.kernel.org 5.10 Signed-off-by: Li Jun <jun.li@nxp.com> Signed-off-by: Frank Li <Frank.Li@nxp.com> Reviewed-by: Peter Chen <peter.chen@kernel.org> Acked-by: Alexander Stein <alexander.stein@ew.tq-group.com> Link: https://lore.kernel.org/r/20221026190749.2280367-1-Frank.Li@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Martin McConnell <mmcconne@redhat.com>
2024-08-30 11:20:34 +00:00
static void xhci_cdns3_plat_start(struct usb_hcd *hcd)
{
struct xhci_hcd *xhci = hcd_to_xhci(hcd);
u32 value;
/* set usbcmd.EU3S */
value = readl(&xhci->op_regs->command);
value |= CMD_PM_INDEX;
writel(value, &xhci->op_regs->command);
if (hcd->regs) {
value = readl(hcd->regs + XECP_AUX_CTRL_REG1);
value |= CFG_RXDET_P3_EN;
writel(value, hcd->regs + XECP_AUX_CTRL_REG1);
value = readl(hcd->regs + XECP_PORT_CAP_REG);
value |= LPM_2_STB_SWITCH_EN;
writel(value, hcd->regs + XECP_PORT_CAP_REG);
}
}
static int xhci_cdns3_resume_quirk(struct usb_hcd *hcd)
{
xhci_cdns3_plat_start(hcd);
return 0;
}
static const struct xhci_plat_priv xhci_plat_cdns3_xhci = {
.quirks = XHCI_SKIP_PHY_INIT | XHCI_AVOID_BEI,
usb: cdns3: host: fix endless superspeed hub port reset JIRA: https://issues.redhat.com/browse/RHEL-54566 commit 9d5333c931347005352d5b8beaa43528c94cfc9c Author: Li Jun <jun.li@nxp.com> Date: Wed Oct 26 15:07:49 2022 -0400 usb: cdns3: host: fix endless superspeed hub port reset When usb 3.0 hub connect with one USB 2.0 device and NO USB 3.0 device, some usb hub reports endless port reset message. [ 190.324169] usb 2-1: new SuperSpeed USB device number 88 using xhci-hcd [ 190.352834] hub 2-1:1.0: USB hub found [ 190.356995] hub 2-1:1.0: 4 ports detected [ 190.700056] usb 2-1: USB disconnect, device number 88 [ 192.472139] usb 2-1: new SuperSpeed USB device number 89 using xhci-hcd [ 192.500820] hub 2-1:1.0: USB hub found [ 192.504977] hub 2-1:1.0: 4 ports detected [ 192.852066] usb 2-1: USB disconnect, device number 89 The reason is the runtime pm state of USB2.0 port is active and USB 3.0 port is suspend, so parent device is active state. cat /sys/bus/platform/devices/5b110000.usb/5b130000.usb/xhci-hcd.1.auto/usb2/power/runtime_status suspended cat /sys/bus/platform/devices/5b110000.usb/5b130000.usb/xhci-hcd.1.auto/usb1/power/runtime_status active cat /sys/bus/platform/devices/5b110000.usb/5b130000.usb/xhci-hcd.1.auto/power/runtime_status active cat /sys/bus/platform/devices/5b110000.usb/5b130000.usb/power/runtime_status active So xhci_cdns3_suspend_quirk() have not called. U3 configure is not applied. move U3 configure into host start. Reinit again in resume function in case controller power lost during suspend. Cc: stable@vger.kernel.org 5.10 Signed-off-by: Li Jun <jun.li@nxp.com> Signed-off-by: Frank Li <Frank.Li@nxp.com> Reviewed-by: Peter Chen <peter.chen@kernel.org> Acked-by: Alexander Stein <alexander.stein@ew.tq-group.com> Link: https://lore.kernel.org/r/20221026190749.2280367-1-Frank.Li@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Martin McConnell <mmcconne@redhat.com>
2024-08-30 11:20:34 +00:00
.plat_start = xhci_cdns3_plat_start,
.resume_quirk = xhci_cdns3_resume_quirk,
};
static const struct xhci_plat_priv xhci_plat_cdnsp_xhci = {
.quirks = XHCI_CDNS_SCTX_QUIRK,
};
static int __cdns_host_init(struct cdns *cdns)
{
struct platform_device *xhci;
int ret;
struct usb_hcd *hcd;
cdns_drd_host_on(cdns);
xhci = platform_device_alloc("xhci-hcd", PLATFORM_DEVID_AUTO);
if (!xhci) {
dev_err(cdns->dev, "couldn't allocate xHCI device\n");
return -ENOMEM;
}
xhci->dev.parent = cdns->dev;
cdns->host_dev = xhci;
ret = platform_device_add_resources(xhci, cdns->xhci_res,
CDNS_XHCI_RESOURCES_NUM);
if (ret) {
dev_err(cdns->dev, "couldn't add resources to xHCI device\n");
goto err1;
}
if (cdns->version < CDNSP_CONTROLLER_V2)
cdns->xhci_plat_data = kmemdup(&xhci_plat_cdns3_xhci,
sizeof(struct xhci_plat_priv), GFP_KERNEL);
else
cdns->xhci_plat_data = kmemdup(&xhci_plat_cdnsp_xhci,
sizeof(struct xhci_plat_priv), GFP_KERNEL);
if (!cdns->xhci_plat_data) {
ret = -ENOMEM;
goto err1;
}
if (cdns->pdata && (cdns->pdata->quirks & CDNS3_DEFAULT_PM_RUNTIME_ALLOW))
cdns->xhci_plat_data->quirks |= XHCI_DEFAULT_PM_RUNTIME_ALLOW;
ret = platform_device_add_data(xhci, cdns->xhci_plat_data,
sizeof(struct xhci_plat_priv));
if (ret)
goto free_memory;
ret = platform_device_add(xhci);
if (ret) {
dev_err(cdns->dev, "failed to register xHCI device\n");
goto free_memory;
}
/* Glue needs to access xHCI region register for Power management */
hcd = platform_get_drvdata(xhci);
if (hcd)
cdns->xhci_regs = hcd->regs;
return 0;
free_memory:
kfree(cdns->xhci_plat_data);
err1:
platform_device_put(xhci);
return ret;
}
static void cdns_host_exit(struct cdns *cdns)
{
kfree(cdns->xhci_plat_data);
platform_device_unregister(cdns->host_dev);
cdns->host_dev = NULL;
cdns_drd_host_off(cdns);
}
int cdns_host_init(struct cdns *cdns)
{
struct cdns_role_driver *rdrv;
rdrv = devm_kzalloc(cdns->dev, sizeof(*rdrv), GFP_KERNEL);
if (!rdrv)
return -ENOMEM;
rdrv->start = __cdns_host_init;
rdrv->stop = cdns_host_exit;
rdrv->state = CDNS_ROLE_STATE_INACTIVE;
rdrv->name = "host";
cdns->roles[USB_ROLE_HOST] = rdrv;
return 0;
}