mirror of
https://gitlab.com/redhat/centos-stream/src/kernel/centos-stream-10.git
synced 2026-09-09 00:07:04 +08:00
CKI KWF Bot
ba86e0c8b8
MR: https://gitlab.com/redhat/centos-stream/src/kernel/centos-stream-10/-/merge_requests/2196 ``` PCI updates from v6.18: "Enumeration: - Add PCI_FIND_NEXT_CAP() and PCI_FIND_NEXT_EXT_CAP() macros that take config space accessor functions. Implement pci_find_capability(), pci_find_ext_capability(), and dwc, dwc endpoint, and cadence capability search interfaces with them (Hans Zhang) - Leave parent unit address 0 in 'interrupt-map' so that when we build devicetree nodes to describe PCI functions that contain multiple peripherals, we can build this property even when interrupt controllers lack 'reg' properties (Lorenzo Pieralisi) - Add a Xeon 6 quirk to disable Extended Tags and limit Max Read Request Size to 128B to avoid a performance issue (Ilpo Järvinen) - Add sysfs 'serial_number' file to expose the Device Serial Number (Matthew Wood) - Fix pci_acpi_preserve_config() memory leak (Nirmoy Das) Resource management: - Align m68k pcibios_enable_device() with other arches (Ilpo Järvinen) - Remove sparc pcibios_enable_device() implementations that don't do anything beyond what pci_enable_resources() does (Ilpo Järvinen) - Remove mips pcibios_enable_resources() and use pci_enable_resources() instead (Ilpo Järvinen) - Clean up bridge window sizing and assignment (Ilpo Järvinen), including: - Leave non-claimed bridge windows disabled - Enable bridges even if a window wasn't assigned because not all windows are required by downstream devices - Preserve bridge window type when releasing the resource, since the type is needed for reassignment - Consolidate selection of bridge windows into two new interfaces, pbus_select_window() and pbus_select_window_for_type(), so this is done consistently - Compute bridge window start and end earlier to avoid logging stale information MSI: - Add quirk to disable MSI on RDC PCI to PCIe bridges (Marcos Del Sol Vives) Error handling: - Align AER with EEH by allowing drivers to request a Bus Reset on Non-Fatal Errors (in addition to the reset on Fatal Errors that we already do) (Lukas Wunner) - If error recovery fails, emit FAILED_RECOVERY uevents for the devices, not for the bridge leading to them. This makes them correspond to BEGIN_RECOVERY uevents (Lukas Wunner) - Align AER with EEH by calling err_handler.error_detected() callbacks to notify drivers if error recovery fails (Lukas Wunner) - Align AER with EEH by restoring device error_state to pci_channel_io_normal before the err_handler.slot_reset() callback. This is earlier than before the err_handler.resume() callback (Lukas Wunner) - Emit a BEGIN_RECOVERY uevent when driver's err_handler.error_detected() requests a reset, as well as when it says recovery is complete or can be done without a reset (Niklas Schnelle) - Align s390 with AER and EEH by emitting uevents during error recovery (Niklas Schnelle) - Align EEH with AER and s390 by emitting BEGIN_RECOVERY, SUCCESSFUL_RECOVERY, or FAILED_RECOVERY uevents depending on the result of err_handler.error_detected() (Niklas Schnelle) - Fix a NULL pointer dereference in aer_ratelimit() when ACPI GHES error information identifies a device without an AER Capability (Breno Leitao) - Update error decoding and TLP Log printing for new errors in current PCIe base spec (Lukas Wunner) - Update error recovery documentation to match the current code and use consistent nomenclature (Lukas Wunner) ASPM: This is a risky change that may uncover hardware or configuration defects at boot-time rather than when users enable ASPM via sysfs later. Booting with "pcie_aspm=off" prevents this enabling (Manivannan Sadhasivam) - Remove the qcom code that enabled ASPM (Manivannan Sadhasivam) Virtualization: - Add rescan/remove locking when enabling/disabling SR-IOV, which avoids list corruption on s390, where disabling SR-IOV also generates hotplug events (Niklas Schnelle) Peer-to-peer DMA: - Free struct p2p_pgmap, not a member within it, in the pci_p2pdma_add_resource() error path (Sungho Kim) Endpoint framework: - Document sysfs interface for BAR assignment of vNTB endpoint functions (Jerome Brunet) - Fix array underflow in endpoint BAR test case (Dan Carpenter) - Skip endpoint IRQ test if the IRQ is out of range to avoid false errors (Christian Bruel) - Fix endpoint test case for controllers with fixed-size BARs smaller than requested by the test (Marek Vasut) - Restore inbound translation when disabling doorbell so the endpoint doorbell test case can be run more than once (Niklas Cassel) - Avoid a NULL pointer dereference when releasing DMA channels in endpoint DMA test case (Shin'ichiro Kawasaki) - Convert tegra194 interrupt number to MSI vector to fix endpoint Kselftest MSI_TEST test case (Niklas Cassel) - Reset tegra194 BARs when running in endpoint mode so the BAR tests don't overwrite the ATU settings in BAR4 (Niklas Cassel) - Handle errors in tegra194 BPMP transactions so we don't mistakenly skip future PERST# assertion (Vidya Sagar) Freescale i.MX6 PCIe controller driver: - Enable the 3.3V Vaux supply if available so devices can request wakeup with either Beacon or WAKE# (Richard Zhu) MediaTek PCIe Gen3 controller driver: - Add optional sys clock ready time setting to avoid sys_clk_rdy signal glitching in MT6991 and MT8196 (AngeloGioacchino Del Regno) - Add DT binding and driver support for MT6991 and MT8196 (AngeloGioacchino Del Regno) NVIDIA Tegra PCIe controller driver: - When asserting PERST#, disable the controller instead of mistakenly disabling the PLL twice (Nagarjuna Kristam) - Convert struct tegra_msi mask_lock to raw spinlock to avoid a lock nesting error (Marek Vasut) Qualcomm PCIe controller driver: - Select PCI Power Control Slot driver so slot voltage rails can be turned on/off if described in Root Port devicetree node (Qiang Yu) - Parse only PCI bridge child nodes in devicetree, skipping unrelated nodes such as OPP (Operating Performance Points), which caused probe failures (Krishna Chaitanya Chundru) - Add 8.0 GT/s and 32.0 GT/s equalization settings (Ziyue Zhang) - Consolidate Root Port 'phy' and 'reset' properties in struct qcom_pcie_port, regardless of whether we got them from the Root Port node or the host bridge node (Manivannan Sadhasivam) - Fetch and map the ELBI register space in the DWC core rather than in each driver individually (Krishna Chaitanya Chundru) - Enable ECAM mechanism in DWC core by setting up iATU with 'CFG Shift Feature' and use this in the qcom driver (Krishna Chaitanya Chundru) - Add SM8750 compatible to qcom,pcie-sm8550.yaml (Krishna Chaitanya Chundru) - Update qcom,pcie-x1e80100.yaml to allow fifth PCIe host on Qualcomm Glymur, which is compatible with X1E80100 but doesn't have the cnoc_sf_axi clock (Qiang Yu) Renesas R-Car PCIe controller driver: - Fix a typo that prevented correct PHY initialization (Marek Vasut) - Add a missing 1ms delay after PWR reset assertion as required by the V4H manual (Marek Vasut) - Assure reset has completed before DBI access to avoid SError (Marek Vasut) - Fix inverted PHY initialization check, which sometimes led to timeouts and failure to start the controller (Marek Vasut) - Pass the correct IRQ domain to generic_handle_domain_irq() to fix a regression when converting to msi_create_parent_irq_domain() (Claudiu Beznea) - Drop the spinlock protecting the PMSR register - it's no longer required since pci_lock already serializes accesses (Marek Vasut) - Convert struct rcar_msi mask_lock to raw spinlock to avoid a lock nesting error (Marek Vasut) SOPHGO PCIe controller driver: - Check for existence of struct cdns_pcie.ops before using it to allow Cadence drivers that don't need to supply ops (Chen Wang) - Add DT binding and driver for the SOPHGO SG2042 PCIe controller (Chen Wang) Synopsys DesignWare PCIe controller driver: - Add support for x16 in devicetree 'num-lanes' property (Konrad Dybcio) - Verify that if DT specifies a single IRQ for all eDMA channels, it is named 'dma' (Niklas Cassel) TI J721E PCIe driver: - Add MODULE_DEVICE_TABLE() so driver can be autoloaded (Siddharth Vadapalli) - Power controller off before configuring the glue layer so the controller latches the correct values on power-on (Siddharth Vadapalli) TI Keystone PCIe controller driver: - Use devm_request_irq() so 'ks-pcie-error-irq' is freed when driver exits with error (Siddharth Vadapalli) - Add Peripheral Virtualization Unit (PVU), which restricts DMA from PCIe devices to specific regions of host memory, to the ti,am65 binding (Jan Kiszka) Xilinx NWL PCIe controller driver: - Clear bootloader E_ECAM_CONTROL before merging in the new driver value to avoid writing invalid values (Jani Nurminen)" JIRA: https://issues.redhat.com/browse/RHEL-139968 Omitted-fix: 43d324eeb08c ("PCI: dwc: Fix missing iATU setup when ECAM is enabled") Omitted-fix: 6a00c043af07 ("MIPS: Loongson2ef: Register PCI controller in early stage") Omitted-fix: 32ec46510352 ("MIPS: Loongson2ef: Use pcibios_align_resource() to block io range") Omitted-fix: fc2bc2623e3a ("Revert "PCI: qcom: Prepare for the DWC ECAM enablement"") Signed-off-by: Myron Stowe <mstowe@redhat.com> ``` Approved-by: John W. Linville <linville@redhat.com> Approved-by: Jarod Wilson <jarod@redhat.com> Approved-by: Enric Balletbo i Serra <eballetbo@redhat.com> Approved-by: Brian Masney <bmasney@redhat.com> Approved-by: Steve Best <sbest@redhat.com> Approved-by: Michal Schmidt <mschmidt@redhat.com> Approved-by: CKI KWF Bot <cki-ci-bot+kwf-gitlab-com@redhat.com> Merged-by: CKI GitLab Kmaint Pipeline Bot <26919896-cki-kmaint-pipeline-bot@users.noreply.gitlab.com>